Docomo FOMA SA700IS User Manual

Manual

for

’05.9

Contents/

Safety Precautions

Before using

SA700iS

Making/Receiving

calls

Making/Receiving
Video-phone calls

Phonebook

Sounds/Displays/

Displaying/Editing/

Managing Data

Other convenient

Network service

Lights

Safety settings

Camera

i-mode

Mail

i-αppli

i-motion

GPS function

functions

Data communication

Character input

Appendix/External devices linkage/

Quick reference manual

Troubleshooting

Quick search/Index/

Correction and Apology

Thank you for purchasing "FOMA SA700iS" mobile terminal.
We apologize for the errors in "Manual for FOMA SA700iS" and would like to correct
those as follows.
And please refer to the additional information about infrared communication of

phonebook data with FOMA terminals of other companies.

■We would like to correct the errors in the chart of "Data

sent/received with Infrared communication" on P379.

<Incorrect>

Received mail
(i-mode mail/SMS)

Inbox Main folder

Sent mail
(i-mode mail/SMS)

Unsent message
(i-mode mail/SMS)

Outbox Main folder

Unsent messages
Main folder

Registered from the top.
In receiving all, front data is registered from the bottom.

↓

<Correct>

Received mail
(i-mode mail/SMS)

Sent mail
(i-mode mail/SMS)

Unsent message
(i-mode mail/SMS)

Inbox Main folder

Outbox Main folder

Unsent messages
Main folder

Registers by the order of received date.

Registers by the order of sent date.

Registers by the order of saved date.

■Infrared communication of phonebook data with FOMA terminals of

other companies

・When sending the phonebook data from SA700iS to FOMA terminal of other

companies, the edited group name of Group 0 on the sender's terminal is not
taken over to the receiver's FOMA terminal of other companies.

・If the phonebook data which Group number is over 20, and is sent from FOMA

terminals of other companies to SA700iS, all applicable data are registered to
Group 0 in SA700iS. And the name of Group 0 is overwritten to the group name
of Phonebook data last sent at that time.

※Upper conditions are also applied for the memory copy on changing the

model or repairing the terminals.

1AH6P1P0430--

DoCoMo W-CDMA System

Thank you for purchasing FOMA SA700iS mobile terminal.

Both before and during use of FOMA SA700iS mobile terminal, be sure to thoroughly read this
manual and instruction manuals that come with the battery pack and other devices to ensure you
are able to correctly use FOMA SA700iS mobile terminal. Contact "General service inquiries" on the
back of this manual for details.
FOMA SA700iS mobile terminal will be your able partner.
Treated with care, use FOMA SA700iS far into the future.

Before Using FOMA Mobile Terminal

• Because FOMA terminal uses radio waves, it may not function in locations where it is difficult for radio waves to
penetrate, such as tunnels, underground passages and some buildings, in areas where radio wave signals are
weak, or when outside the service area. Even when you are high up in a tall building or condominium and nothing
blocks your view outside, FOMA terminal may not be able to receive or transmit signals. Also, communication
may be interrupted even when the signal meter on FOMA terminal indicates there is a strong signal and you are
not moving (traveling).

• Use FOMA terminal in a way that does not disturb others in public spaces, crowded locations or quiet places.

• Because FOMA terminal uses radio waves to communicate, there is a possibility that third parties may attempt
to listen in on your calls. The W-CDMA system automatically supports a confidential communication function for
all calls so even if someone should somehow be able to tap a call, the signals are modified so that the
eavesdropping party will hear only noise.

• FOMA terminal encodes voice communication as digital data. When you are operating FOMA terminal while
moving to a location subject to weaker radio wave signals, the transmitted digital data may not be correctly
decoded and as a result the decoded voice may differ somewhat from the actual voice.

• Keep a separate written record of the data you register in FOMA terminal. If the data should be erased, DoCoMo
assumes no responsibility for the loss of any data.

• The user hereby agrees that the user shall be solely responsible for the result of the use of SSL. Neither DoCoMo
nor the certifier as listed herein makes any representation and warranty as for the security in the use of SSL. If
the data should be erased, DoCoMo assumes no responsibility for the loss of any data.
Certifier: VeriSign Japan K.K., Betrusted Japan Co., Ltd., GeoTrust Japan, inc.

• This FOMA terminal supports FOMA plus area.

• FOMA terminal can be used only via the FOMA network provided by DoCoMo.

Before Using Operation Manual (this manual)

• Refer to Contents  P2
Look up the page with the items or functions to know from Contents.

• Refer to Index  P540
Look up the page with the items or function name you want to know from Index.

• Refer to Quick search  P538
Use Simple index to look up operating instructions through function names.

• Refer to the side index for each chapter
Look up the page with the items or function names to know from Index on the front page for each chapter or side indexes.

• Refer to the features  P4
Use these pages on which features of FOMA SA700iS are described.

• Use Quick reference manual  P556
Operation procedures of frequently used functions are described at the end of the book. Tear it out of this
manual to use.

• In this "Manual for FOMA SA700iS", "FOMA SA700iS" is usually referred to as "FOMA terminal". Please be
forewarned.

• This manual describes the functions performed with a miniSD memory card. miniSD memory card is required
to purchase separately. Using miniSD memory card  P361

• Unauthorized copying of parts of or this entire manual is prohibited.

• The contents of this manual are subject to change without prior notice.

How to use this manual

The page below is an example of contents and procedure of this manual.

Functional
overview

Side index
and
Chapter title

Important
screens to
operate or
refer

Additional
information
to operate

Time and date setting

Setting date and time

Sets the date and time of FOMA terminal. Date and time setting is displayed on screen or
Backside-display after setting.

•

Date and time can be entered between 0:00, January, 2000 and 23:59, December, 2099.

<ex> Setting to 10:30, December 24th, 2005

erofeB

Press C s Press s Press 5 s Press 1.

1

su

Ｔｉｍｅ ａｎｄ ｄａｔｅ ｓｅｔｔｉｎｇ

＿＿：＿ ＿
＿＿／＿＿／２０＿＿

（

ＭＭ／ＤＤ／ＹＹＹＹ

Si007AS gni

Voice notice

Notifying the current time or received call etc. with voice announcement

Notifies the current time or contents of Notify icons with voice-announce in standing by.

•

Voice notice cannot be notified during Side key operation invalid (whe n FOMA terminal folded) or All
lock.

•

Voice notice can be operated with FOMA terminal opened or folded.

•

Notify icons: P34

Setting Voice notice

Press C s Press s Press 9 s Press 6.

1

Press one of 1 to 4.

2

Time : Notifies the time.

Notices : Notifies the contents of N otify icon.

Time and notices
OFF : Notice with voice-announce is not made.

INFORMATION

•

Contents of Notify icons are notified with vibration during Manner mode or Ring tone volume OFF. Vibrations

differ depending on contents to notify.

The page shown here represents an example. Images may differ from actual page in this manual.

Time and date setting screen is displayed.

）

: Notifies the time and the contents of Notify icon.

See next page

Default Time

000

Title

Information
to understand
before
operation

Default settings

Page reference

Operation

Useful
information

See next page
for more steps

Contents displayed on screen

•In this manual, descriptions are based on the default settings. Contents displayed on screens may differ from

the description on this manual depending on settings.

•The images or illustrations provided in this manual are for information purposes only and may differ from the

actual screens.

Quick reference manual

•Quick reference manual indicates basic operation procedure. P556

Operation procedure

•See P35 for how to read the operation procedure of this manual.

1

CONTENTS

Contents/Safety Precautions

Before Using FOMA Mobile Terminal . . . . . . . . . . . . . . . . . . . . . . . Back Page

Before Using Operation Manual (this manual) . . . . . . . . . . . . . . . Back Cover

How to use this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Features of FOMA SA700iS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Making full use of FOMA SA700iS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Precautions (ALWAYS FOLLOW THESE DIRECTIONS) . . . . . . . . . . . . . . . . 8

Handling instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Intellectual property rights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Basic package and optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Before using SA700iS 23

Names and functions of parts Reading display Selecting Menu Using UIM (FOMA card)
Inserting/Removing battery pack Charging Remaining battery level Power ON/OFF
Setting Date/Time CallerID notification View profile Select language etc.

Making/Receiving calls 49

Making call Redialing International call Receiving call Any key answer Open to talk
Closing action Received call Earpiece volume Calls on-hold Driving mode
Receiving message etc.

Making/Receiving Video-phone calls 75

Making Video-phone call Receiving Video-phone call Chara-den Setting images to send
Display setting (of Video-phone calls) etc.

Phonebook 87

Registering entry Edit group Search phonebook Edit/Delete phonebook Secret setting etc.

Sounds/Displays/Lights 107

Sound setting Vibrator setting Manner mode Stand-by display setting Light setting
LED setting etc.

Safety settings 129

Security code Change security code PIN code All lock Self mode PIM lock
Keypad dial lock Side key operation Valid/Invalid Secret mode Call rejection etc.

Camera 145

Shooting still image Recording movie image Shoot/Record setting Bar code reader
Character reader etc.

i-mode 177

i-mode Displaying site Change i-mode password Connect Internet Bookmark
Screen memo Save image i-melody i-mode setting MessageR/F Certificate operation etc.

* miniSD memory cards are optional accessori es.P361

2

Mail 221

Compose/Send i-mode mail Deco-mail Attachment Save i-mode mail
Receive i-mode mail Check new message Reply to i-mode mail i-motion mail
Play/Save melody Mail setting Compose/Send SMS etc.

i-gppli 283

Download Start i-gppli i-gppli To setting i-gppli Stand-by display setting etc.

i-motion 303

i-motion Download i-motion i-motion auto play setting

GPS function 307

Position location Navigation GPS software Location provide Notify location etc.

Displaying/Editing/Managing Data 331

Play Still/Movie image Edit Still/Movie image Chara-den Play Melody
miniSD memory card Management of folder/data Infrared communication Voice recorder
Print mode etc.

Other Convenient Functions 393

Multiaccess Multitask Alarm Schedule Shortcut menu View profile
Stand-by/Calling voice memo Duration/Cost Calculator Text memo Reset settings
Delete all data Dictionary Voiced readout etc.

Network service 431

Voice mail service Call waiting Call forwarding service Nuisance call barring service
Check CallerID request status Dual network service English guidance Service dialing no.
Arrival act Remote access etc.

Contents/Safety Precautions

Data communication 443

Data communication Connection to PC Installation of connection setting file
Using/Not using FOMA PC setting software AT commands etc.

Character input 477

Character input Common phrase/Edit emoticons Copy characters Input code
Register to user dictionary Download dictionary Input prediction 2-touch method etc.

Appendix/External devices linkage/Troubleshooting 495

Menu list List of characters assigned to Input bar Input code list
Combination of Multiaccess/Multitask functions Options and related devices Data link software
Movie player software Play music Troubleshooting List of Error messages
Warranty and After-sales Service Software update SAR certification information etc.

Quick search/Index/Quick reference manual 537

3

Features of FOMA SA700iS

FOMA is the name of services provided by DoCoMo based on W-CDMA format, which is recognized as

Contents/Safety Precautions

one of the systems compliant to the global standard for third generation wireless communications (IMT-

2000).

Amazing because it's i-mode!

i-mode is the online service providing useful information from i-mode Menu sites (programs) or i-mode
compatible Homepages, or transferring mails easily on the screen of i-mode terminals.

i-modeP177

Displays online services of weather report or
news provided by IP (Information Service
Provider) or various i-mode compatible
Homepages from Menu List of i-mode Menu.

i-mode mailP222

Up to 5,000 characters of E-mails can be
transferred between i-mode terminals or Internet
mail addresses.

i-shotP226

Images shot by i-mode terminals with camera can
be sent by attaching to mails.

SA700iS main features

Video-phoneP75

You can talk to the other party in far place
watching each face. Plays callers voice sounded
from the speaker, or switches to Out-camera to
show surrounding landscapes to the other party.

Deco-mailP232

Deco-mail allows you to compose and send more
expressive E-mail messages with the varieties of
font color/size/background color, and insert
Deco-mail picture or images shot by the camera
etc to message. Also Deco-mail can be easily
composed with templates from received Deco­mail or downloaded from sites.

i-motionP303

You can download image/voice/sound data from i­motion compatible sites to i-mode terminals to enjoy.

i-motion mailP226

i-motion saved to i-mode terminals can be sent
by attaching to E-mails.

Chara-denP352

Displays preset characters or downloaded
characters instead of the self image in video­phone call. Characters can be decorated with face
expressions or movements by operating keys.

i-gppli/i-gppliDXP283

Downloads various i-gppli from sites, and utilize
or set to Stand-by display etc. Also i-gppliDX
allows you to broaden the use of i-gppli by
operating with the data of Phonebook or mails in
i-mode terminals.

Wide variety of network services

•Voice mail service (charged)

•Call forwarding service

•Call waiting (charged)

* miniSD memory cards are optional accessori es.P361

4

*1

P433 •SMS (Short Message)

*1

P436 •Dual network service (charged)*1 P439

*1

P435

*1: Optional registration is required. *2: Optional registration is not required.

*2

P275

Safety settings

Sets the terminal security code to protect privacy, or All lock/Self-mode not to be rev ealed or connected by outside
parties freely.

Other convenient functions

Contents/Safety Precautions

GPS functionP307

Retrieves location information of FOMA terminals
by using radio waves transmitted from GPS
satellites. Following services are available with
retrieved location information.

•Displaying map or searching surrounding

information of the present location.

Sends retrieved location information to Location
web site (GPS compatible i-mode site), and map
or surrounding information can be easily
searched.

•Sending present location or favorite places

by mails.

Location information can be attached to mail
messages. Also, i-mode users who received the
mail can confirm the location with maps.
Add location information such as shops to
Phonebook etc. to confirm the shop location with
maps.
Add location information to shot still images to
confirm later with maps.

•

Using GPS compatible i-gppli (GPS software)

Useful i-gppli is available to use location
information.

•Using Navigation

Navigation to the destination is available by
using retrieved location information.

High-qualified camera functionsP145

FOMA terminal is mounted CCD camera with
approximately 1,030,000 effective pixels (maximum
approximately 1,000,000 pixels for recording), and
can shoot still images up to the size of 1MB. You
can shoot with decoration of frames or special
effects, or continuous shooting. FOMA terminals
can also record movie images up to QCIF size with
using video function.

Character readerP173 / Bar code readerP168

Scan phone numbers or addresses with camera of
FOMA terminals, and register Phonebook or
compose i-mode mails. Also scanned English words
can be translated. Scan a JAN code or QR code.

Voiced readout functionP429

Phonebook data, Text memo or mails can be read
out with voices. Speed, volume or quality to read
out can be configured.

MultitaskP396

Allows multiple functions/applications at a time sending/
receiving mails during a call or confirming schedule.

Voice recorderP384

You can record voices during meetings with etc. FOMA
terminals. (up to 120 minutes (when saving to miniSD
memory card)) Also, recording location can be shot as still
images before recording and attached to sound data.

MelodyP358

FOMA terminals contain PCM format melodies
with 64 chords to set to Ring tone of phone/mail.
PCM format melodies with surrounded sound can
be downloaded from the sites and used.

Infrared communication P378 / Infrared remote

control functions P383

Phonebook data, messages, images, melodies
and other data can be exchanged between
FOMA terminals and mobile phones. FOMA
terminal can also be used as a TV infrared remote
control.

FlashTM supportP182

Enjoy Flash movies and animations on i-mode
sites with FOMA terminals. Also download Flash
animation and set to Stand-by display.

miniSD memory card support P361

With supporting miniSD memory card standard,
images, melodies or sound data saved in external
devices can be used in FOMA terminals.
Movie images or sound data saved to miniSD
memory card can be played with FOMA terminals.
(Play may be unable under some conditions. )
Also, images, Phonebook data or mails in FOMA
terminals can be saved to external devices by
using miniSD memory card.

5

Making full use of FOMA SA700iS !

This section introduces various functions of FOMA SA700iS with screen images.

Contents/Safety Precautions

Chara-denP80

Allows to switch an image of Video-phone call for sending easily. Using Chara-den, characters
representing the self-image answer the call with various actions or face expressions.

Images of you and
the other party

Characters
representing yourself

Switches screens of
you and the other party

Express feelings with
character actions

Deco-mailP232, P238

Allows to send colorful and enjoyable mails easily with changing font color or background color, or
inserting pictures of Deco-mail picture or shot with In-camera.

Ｍｅｓｓａｇｅ

Ｈｅｌｌｏ

Ｐｒｅｖｉｅｗ
Ｃｈａｒ．    Ｐｉｃｔｕｒｅ／Ｍａｒｋ

Ｒ．９９９５

Ｍｅｓｓａｇｅ

Ｈｅｌｌｏ

  Ｐｒｅｖｉｅｗ

Ｅｄｉｔ ｄｅｃｏｒａｔｉｏｎ

Ｒ．９９９５

Ｐｒｅｖｉｅｗ

Ｈｅｌｌｏ． Ｍｙ ｃｏｎｔａｃｔ ｈａｓ ｂｅ
ｅｎ ｃｈａｎｇｅｄ．
ｈｔｔｐ

：

／／ｗｗｗ．ａｂｃ１２３．ｃｏ．ｊｐ

ｄｏｃｏｍｏ

．

ｔａｒｏ△△＠ｄｏｃｏｍｏ
ｊｐ
０９０ＸＸＸＸＸＸＸＸ

．ｎｅ．

Ｓｅｎｄ ｍｅｓｓａｇｅ

Ｓｅｎｄｉｎｇ ｍｅｓｓａｇｅ

Enter message Palette Preview Send Deco-mail

Character readerP173

Scans with In-camera of FOMA terminals on Phone number or mail address to read. Scanned data can
be used in various ways such as registering to Phonebook or sending as mails.

Ｃｈａｒａｃｔｅｒ ｒｅａｄｅｒ

ｓａｎｙｏ＿ｔａｒｏ

Ｆｏｃｕｓ ｌｅｖｅｌ
Ｔｈｅ ｃｌｏｓｅｒ ｔｏ    ｉｔ ｉｓ，
ｔｈｅ ｅａｓｉｅｒ ｔｏ ｒｅｃｏｇｎｉｚｅ
ｃｈａｒａｃｔｅｒｓ ｉｔ ｉｓ

２５６

Start Character reader

Ｃｈａｒａｃｔｅｒ ｒｅａｄｅｒ

ｓａｎｙｏ＿ｔａｒｏ

Ｆｏｃｕｓ ｌｅｖｅｌ

ｓａｎｙｏ＿ｔａｒｏ

２４６

Scan codes

Ｃｈａｒａｃｔｅｒ ｒｅａｄｅｒ

ｓａｎｙｏ＿ｔａｒｏ

文字   記号

Use in entering characters

6

GPS function : NavigationP310

Navigates to the destination easily using retrieved location information.

東京タワー

０３ＸＸＸＸＸＸＸＸ

東京都港区芝公園

Ｘ−Ｘ−Ｘ

地図を確認する

     位置情報を保存する

今すぐナビ

現在地から

ナヒ゛ケ゛ーション！

乗物＋徒歩

自動車

徒歩のみ

From Navigation top
screen

乗物＋徒歩で

ルート

測位

第

■現在地  
  徒歩

  音声

を検索しました

レヘ゛ル

★★★

出発地の確認＆修正

１

経路 

 ３５

分

第
第

２

経路 

 ４０

分

第３経路 

 ４５

分

４

経路 

 ５０

分

第

1

経路   

２１０     3５

（１６０ｍ）

ルート

地図確認  

ナヒ゛開始！

小川町 B7口

分

Route search result

•

Navigation screen is an example.

Confirm destination and
select transportation.

Display the route.

Ｌｏｃａｔｉｏｎ ｐｒｏｖｉｄｅ

Ｐｒｅｓｓ ｃｌｅａｒ ｋｅｙ

Ｐｒｅｓｓ ｃｌｅａｒ
 ｔｏ ｃａｎｃｅｌ

ｋｅｙ ｔｏ ｃａｎｃｅｌ

Ｐｒｏｖｉｄｉｎｇ ｌｏｃａｔｉｏｎ

 Ａｃｃｕｒａｃｙ：

Start positioning.

•

Navigation engine by
NAVITIME JAPAN

•

Map: Shobunsha
Publications, Inc.

Contents/Safety Precautions

G-Guide TV remote controlP291

i-gppli of "G-Guide TV remote control" preset to FOMA terminals by default allows to retrieve TV guide
information whenever requesting. Also operates TV remote control using infrared exchanging data of
FOMA terminals.

G code® is available on
TV guide.

•

The screen shown is an example. Images may differ from the actual displays. Available channels for the area

you live are displayed.

Connects to the server to
retrieve detailed
information of programs.

7

Precautions (ALWAYS FOLLOW THESE DIRECTIONS)

Contents/Safety Precautions

 Before using your FOMA terminal, read the following precautions to

ensure safe use and handling. Keep this manual carefully after reading.

 These precautions are intended to protect you and others around you.

Read and follow the cautions carefully to avoid injury, damage to the
person or property.

 The following signs differentiate the levels of danger that may occur if the

product is not used within the specified guidelines:

DANGER

WARNING

CAUTION

This sign denotes that death or serious injury may
directly result from improper use.

This sign denotes that death or serious injury may
result from improper use.

This sign denotes that body injury or damage to
property may result from improper use.

 The following symbols show specific directions.

This symbol denotes that the action is prohibited.

This symbol denotes that disassembling the equipment or its component is
not allowed.

This symbol denotes that using the equipment or its components near water
or getting the device wet is not allowed.

This symbol denotes that using the equipment or its components with wet
hands is not allowed.

This symbol denotes that an instruction must be obeyed at all times.

This symbol denotes that the equipment must be unplugged.

 Precautions contain the following 6 descriptions;

Handling FOMA terminal, battery pack, adapter (including battery charger) and

UIM (FOMA card) (Common) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Handling FOMA terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Handling battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Handling optional devices (AC adapter/DC adapter/desktop holder/In-car holder) . . . . . . . . . . 14

Handling UIM (FOMA card) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Handling mobile phone near electronic medical devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

8

Handling FOMA terminal, battery pack, adapter (including battery charger) and UIM (FOMA card ) (Common)

DANGER

Use battery pack and adapter
(including battery charger) that are
specified by the DoCoMo group
companies with your FOMA terminal.

Not using equipment specified by DoCoMo
Group companies may cause FOMA
terminal, battery pack and other parts to leak,
heat, burst, catch fire or malfunction.

Battery pack SA01
Desktop holder SA01
FOMA AC adapter 01
FOMA DC adapter 01
FOMA domestic/overseas AC adapter 01

*Contact DoCoMo shop etc. for more
information of other compatible products.

Do not get it wet.

Contact with water or other liquids can
cause heating, electric shock, fire,
malfunctions or injury. Take care where
and how you use the equipment.

WARNING

Do not throw the equipment or give
hard shock to the equipment.

May cause the battery pack to leak,
heat, burst or ignite, and the
equipment to malfunction or catch fire.

Do not put the battery pack, FOMA
terminal, the adapter (including
battery charger) or UIM (FOMA card)
in microwave ovens or other heating
appliances or high-pressure
containers.

May cause the battery pack to leak, heat,
burst or ignite, FOMA terminal or the
adapter (including battery charger) to
heat, smoke, ignite, or damage circuits.

Do not use the equipment in an
environment liable to cause it to
explode or catch fire, such as a gas
station.

Explosions or fire may result if the
equipment is used in areas where dust
or flammable gases such as propane
or gasoline vapors are generated.

Do not attempt to disassemble or
modify, or do not mount solder.

May cause a fire, injury, electric
shock or malfunction.
Also battery pack may leak,
overheat, explode or catch fire.

Do not use or leave the battery pack in
locations subject to high
temperatures, such as near a
fireplace, heating appliances, in direct
sunlight or inside a car on a hot day.

May cause equipment deformation/
malfunction or battery pack/leak/
overheat/explosion/catching fire/
performance loss/reducing service life.
Also the part of a case may get hot
and cause burns.

Do not make electrically conductive
material contacted to charging port or
external connection port. Also do not
built electrically conductive material in.

May cause fire or malfunction from
short-out.

Operate following procedures
immediately when condition may
differ from up until now such as
strange smell, heat generation,
discoloration, or deformation in
using, charging, storing.

1. Remove the power plug from an
outlet or a socket.

2. Turn off FOMA terminal.

3. Remove battery pack FOMA
terminal.
Use in those conditions may cause
overheat, explosion, catching fire or
leak of battery pack.

Contents/Safety Precautions

9

Handling FOMA terminal, battery pack, adapter (including battery charger) and UIM (FOMA card ) (Common) (continued)

Contents/Safety Precautions

Store the equipment out of reach of
infants and children.

The card or adapter can be
accidentally swallowed or cause
injuries.

Do not store the equipment in
extremely humid, dusty or hot areas.

May cause malfunction.

CAUTION

Children using the equipment should
be instructed to operate by adults. Do
not allow them to use the equipment
without adult supervision.

May cause injuries.

Do not leave the equipment on
unstable or sloping surfaces.

May fall and cause malfunction or
injuries.

Handling FOMA terminal

WARNING

Do not use the equipment while
driving a vehicle.

According to the amendment of
Road Traffic Law, the punishment
will be charged by use of mobile
phone while driving vehicle since
1st November, 2004. Even when
you use Hands free kit, park your
vehicle at the safe area and use
your mobile phone. While driving,
activate Driving mode or Voice mail
service.

Be sure to keep FOMA terminal away
from your ear when you talk with the
Hands free function set.

May cause hearing loss.

Turn FOMA terminal off near high­precision electronic control
equipment or electronic equipment
using low-power signals.

May effect electronics devices such
as the mechanical error or
malfunction.
*Examples of electronic equipment
to avoid:
Hearing aids, implanted
pacemakers or defibrillators, other
electrical medical equipment, fire
alarms, automatic doors, other
automatic control equipment.
Users wearing implanted
pacemakers or defibrillators or other
electrical medical equipment should
check with the manufacturer or
sales outlet about the effect of radio
frequencies on the equipment.

10

If you have heart disease, be careful
when setting Receiving vibrator
(vibration) or Ring volume setting.

Can affect heart function.

Handling FOMA terminal (continued)

WARNING

Turn FOMA terminal OFF in areas
where use is prohibited, such as in
airplanes and hospitals.

Using in these areas may cause
electrical equipment or medical
electrical equipment malfunction or
failure.
If the function which automatically
turns on the power is set, cancel the
setting before turning off the power.
When using the equipment in a
medical facility, follow the
regulations and instructions of the
facility.
With prohibited act, such as using
the equipment in an airplane, you
may be punished according to law.

When you use medical electrical
equipment, do not keep the
equipment in your chest pocket or
inside pocket.

Using your FOMA terminal near
medical electronic equipment may
cause equipment failure.

Do not point the infrared data port

Contents/Safety Precautions

toward your eye and transfer the
signals.

May affect your eyes. In addition,
pointing the other infrared devices
to operate may cause mechanical
error or malfunction.

Do not bring the light emitting part
close to the human eyes.

Visual loss may result. Also cause
dizzy eyesight into the accident or
injury.

Do not put FOMA terminal at the place
where the air-bag is blown up, such
as dashboard near the air-bag.

In case air-bag is blown up, FOMA
terminal may hit the people and may
cause injury or malfunction.

Do not point flash and light towards
drivers of vehicles.

May cause accidents from dizzy
eyes.

If lightning strikes while using the
terminal outside, turn OFF the power
immediately, and move to a safe
location.

May be subject to lightning strike
and could cause electric shock.

CAUTION

Do not put liquids such as water,
metal pieces or flammable materials
inside UIM (FOMA card) slot or
miniSD memory card slot of FOMA
terminal.

May cause fire, equipment failure or
electric shock.

Do not leave your FOMA terminal for
a long time in a location where direct
sunlight enters the lens of the built-in
camera.

A light collection effect from the lens
could cause a fire.

Do not swing the FOMA terminal by the
strap

or other parts of the terminal.

May cause equipment damage or
failure, or injury of yourself or
others.

11

Handling FOMA terminal (continued)

Contents/Safety Precautions

The FOMA terminal may give some
users skin problems such as itching,
allergic reactions or rashes. If you
develop skin problems, stop using
the FOMA terminal immediately, and
see a doctor.

The following parts contain metal
materials.

Material Parts

Chromium plating

Aluminum alloy

(Alumite treatment)

Do not bring magnetic cards close to
FOMA terminal.

Out-camera periphery,

Flash/Light,

Cursor key periphery,

Clear key

Center key

Data stored on cash cards, credit
cards, telephone cards and floppy
disks may be erased if the storage
medium is placed near the terminal.

Occasionally, using FOMA terminal in
some vehicle models may cause the
vehicle's electronic malfunction or
failure.

CAUTION

Do not inhale or put the crystalline
liquid leaking from the broken display
in your mouth or on your skin.
If the liquid gets into your eyes or
mouth, rinse with clean water and see
a doctor immediately.
If the liquid adheres to skin or cloth,
use alcohol, etc. to wipe off and wash
with soap.

May cause loss of eyesight or skin
problems.

Take care not to catch fingers into the
hinge part (connection) when
opening FOMA terminal.

Injury or accident may result.

Do not use Flash/Shoot light for the
other purpose than camera shooting/
recording.

Flash/shoot light is turned off with
ending camera. It gets dark
suddenly and accidents may be
caused.

In this case, do not use FOMA
terminal not to hamper safe driving.

Handling battery pack

 Confirm the battery type to match according to the description on the

battery pack label.

Description Battery type

Li-ion Lithium ion battery

DANGER

Do not connect a wire or other metal
material to the battery pack terminals.
Do not carry or store the battery pack
together with a necklace or other
metal material.

May cause the battery pack to leak,
heat, damage or ignite.

I

f the battery fluid contacts eyes, flush
your eyes immediately with clean
water and see a doctor immediately.

Battery fluid in the eyes may cause
blindness.

12

Handling battery pack (continued)

DANGER

Do not bring the battery pack into
open flames.

May cause the battery pack to leak,
heat, damage or ignite.

Do not nail the battery pack, hit with a
hammer or step on it.

May cause the battery pack to leak,
heat, damage or ignite.

WARNING

If the battery pack leaks liquid or
gives off a strange smell, remove the
battery pack from the vicinity of open
flames immediately.

The vapors from leaking battery
fluid may ignite or explode.

If the battery pack does not have a full
charge after being charged for the
specified time, stop charging it.

May cause the battery pack to leak,
heat, damage or ignite.

CAUTION

Do not discard used battery packs
with other garbage.

Igniting or environmental
destruction may be caused. Bring
used battery pack with terminal port
taped for insulation to DoCoMo
shops etc. or follow the instruction of
the municipality collecting used
battery.

Do not try to force the battery pack

Contents/Safety Precautions

onto FOMA terminal if you are having
trouble connecting the battery pack.
Always connect the battery pack after
confirming the right side to attach.

May cause the battery pack to leak,
heat, damage or ignite.

If the battery fluid contacts skin or
clothes, flush the contacted area
thoroughly with clean water
immediately.

The fluid may damage the skin.

13

Handling optional devices (AC adapter/DC adapter/desktop holder/In-car holder)

Contents/Safety Precautions

Always use the DC adapter with a
negative-ground vehicle. Never plug
it into a positive-ground vehicle.

Fire may result.

Do not touch the adapter (including
battery charger) cord or wall outlet
with wet hands.

Electric shock may result.

Do not short out with charging
terminal connected to an output or
cigarette lighter socket.
Also, do not touch the charging
terminal with a part of your body such
as your hand or finger.

Fire, malfunction, electric shock, or
injuries may result.

Only use with the specified power
source and voltage.

If incorrect voltage is used, fire or
failure may result. When using
FOMA terminal overseas, use

WARNING

If the DC adapter fuse blows, be sure
to replace with the specified fuse.

Applying wrong fuse may cause fire
or equipment malfunction. For the
specified fuse, see each manuals of
the equipment.

Do not use the AC adapter and
desktop holder in a bathroom or other
highly humid area.

Electric shock may result.

Remove the plug out of output or
cigarette lighter socket, if water or
other fluids get into the adapter.

Electric shock, smoke or fire may
result.

When you connect the AC adapter to
an output, make sure not to make
metal materials such as metal straps
touched and insert firmly.

May cause electric shock, short­circuit or fire.

FOMA domestic/overseas AC
adapter 01.
AC adapter:
AC100V (Connect to 100 VAC
outlet for internal household use
only)
FOMA domestic/overseas AC
adapter:
Between AC100V and 240V
(Connect to AC outlet for household
use)
DC adapter:
12 or 24 VDC (specific for negative­ground vehicle)

Do not touch adapter (including
charger) when lightning strikes.

Do not use the adapter (including
battery charger) cord or power cord if
it gets damaged.

Electric shock, heat or fire may
result.

Wipe off any dust around the plug.

Fire may result.

Connect FOMA terminal to In-car
holder firmly.

Removal of the equipment by
sudden braking, etc. may cause an
accident or the equipment
malfunction.

May be subject to lightning strike
and could cause electric shock.

14

Handling optional devices (AC adapter/DC adapter/desktop holder/In-car holder) (continued)

WARNING

Remove the plug of adapter out of the
wall output or cigarette lighter socket
when not using for a while.

Electric shock, fire or malfunction
may result.

Do not eager to pull the power plug
out when the plug is not removed.

May cause damage, electric shock
or malfunction.

CAUTION

Remove the plug of the adapter from
the cigarette lighter socket or wall
output when cleaning the equipment.

Electric shock may result.

Do not place heavy objects on the
adapter (including battery charger)
cord.

May cause electric shock or fire.

Place the desktop holder or AC
adapter in a stable location during
charging. Do not cover or wrap the
desktop holder or AC adapter with a
cloth or blanket, etc.

May cause the optional devices to
be heated, resulting in fire or
troubles.

Do not use output or wiring accessories
beyond rated specification.

May cause heating or firing with
plugging too many leads into a
single socket.

When you pull the adapter (including
battery charger) out of the output or a
cigarette lighter socket, do not pull
with holding not the code but the
plug.

Pulling the cord may damage the
code itself, possibly leading to
electric shock or fire.

Contents/Safety Precautions

Handling UIM (FOMA card)

CAUTION

Be careful to remove IC part of UIM
(FOMA card)

Hands or fingers may be injured.

15

Handling mobile phone near electric medical devices

 The following safety precautions conform to "Guidelines regarding the

Contents/Safety Precautions

protection of electronic medical equipment from radio waves emitted by
mobile phones" (Electromagnetic Compatibility Conference Japan).

WARNING

Implanted devices such as pacemakers
or defibrillators must be used at least
22 cm away from the FOMA terminal.

The Signal of FOMA terminal may
affect the operation of implanted
pacemakers or defibrillators, and
other devices.

Turn FOMA terminal OFF in crowded
trains or other public places for the
people with pacemaker or
defibrillator planted.

The Signal of FOMA terminal may
affect the operation of implanted
pacemakers or defibrillators, and
other devices.

Obey the following rules inside medical
facilities:

• Do not bring FOMA terminal into operating

rooms (ORs), intensive care units (ICUs) or

coronary care units (CCUs).

• Turn FOMA terminal OFF in hospital wards.

• Turn FOMA terminal OFF in hospital lobbies

and corridors if electrical medical devices

are around.

• If the medical facility has specified zones

where use or possession of mobile devices

is prohibited, follow those instructions.

• If the function to turn on the power

automatically is set, cancel the setting

before turning off the power.

When using electric medical devices
other than implanted pacemakers or
defibrillators outside the medical
facilities (such as in home-care),
check the affection of the signal of
the devices to the manufacturer.

FOMA terminal's signals may affect
the performance of electrical
medical devices.

16

Handling instructions

General

• Keep water away from FOMA terminal.

- FOMA terminal, battery pack and adapter (including battery charger) are not waterproof. Do not use
FOMA terminal in bathrooms, other high-humidity areas, or in the rain. Also sweat may corrode the
inner components and cause malfunction when carrying FOMA terminal near your body.
Note that malfunctions deemed to be caused by water are not covered by the warranty, and may not
be possible to repair. Since these malfunctions are not covered with warranty, repair, if possible, is to
be done with owner's expense.

• Clean FOMA terminal with a dry soft cloth.

- Some FOMA terminal models may use the special coating on the display to make the color LC display
easy to be read. When cleaning FOMA terminal, rubbing it roughly with a dry cloth can scratch the
display. Be careful to handle FOMA terminal and use a soft and dry cloth for cleaning (such as a cloth
for eyeglasses). Drops of water or dirt left on the display may cause stains or removal the coating.

- The printing may disappear or color may fade with wiping with alcohol, paint thinner, benzine or
detergent.

• Clean the terminal port occasionally with a dry cotton swab.

- Dirty terminal ports may cause loose contact with FOMA terminal, resulting in power OFF. Also results
poor charging, so clean the terminal port with a dry cloth or cotton swab etc.

• Do not place FOMA terminal near an air-conditioner air outlet.

- The rapid change in humidity may cause dew condensation, causing internal corrosion and
malfunction.

• Do not place FOMA terminal at the area where excessive force is applied.

- Damage and malfunction of LC display or internal PCB caused by cramming into a brimming bag or
putting in a pocket and sitting on FOMA terminal is out of the coverage of the warranty.

• Read respective instructions attached to the battery pack and adapter (including battery charger)

carefully.

Handling FOMA terminal

• FOMA terminal is to be warmed up in using or charging, but it is not a malfunction. Keep using FOMA

terminal.

• Avoid extremely high and low temperature.

- Use FOMA terminal at temperature between 5 to 35 degrees C and at humidity between 45 and 85%.

• FOMA terminal may affect fixed-line telephones, TVs or radios in use nearby, so use FOMA terminal as

far as possible from these appliances.

• Keep a separate written record of the data you register in FOMA terminal.

- DoCoMo assumes no responsibility for accidentally erased data.

• Do not sit down with FOMA terminal in a back pocket. Do not place FOMA terminal at the bottom of a

bag or anywhere it will encounter excessive force.

- Malfunction or damage may result.

• Do not fold FOMA terminal with the strap held inside.

- Malfunction or damage may result.

• Do not put seals on the same surface of LC display or keypads.

- Pressing keypads when folding FOMA terminal may cause false operation or malfunction of FOMA
terminal.

Contents/Safety Precautions

17

• Hold with the strap through your hand.

- May fall and cause disorder.

• Use with the earphone microphone terminal and miniSD memory card slot covered with cover.

- Dust or water may cause malfunction.

• Do not scratch or rasp the display with metal material.

Contents/Safety Precautions

- Display may be hurt.

• Do not leave the camera to direct sunlight.

- May cause color degradation or burn-in of the CCD.

Handling battery pack

• The battery pack is a consumable.

- Replace the battery pack when operation length becomes extremely short on a full charge. Note that
the battery pack's life will vary depending on type of use. Purchase a new battery pack of the specified
type.

• Charge the battery within the temperature range area(5 to 35 degrees C).

• Always charge before using FOMA terminal for the first time or after extended disuse.

• The operation time provided by the battery pack may vary depending on the operating environment and

battery pack's deterioration.

• Dirty metallic parts (terminals) of the battery pack may cause loose contact with the terminal port,

resulting in power OFF, etc. Wipe the dirty terminal ports with dry cloths or cotton swab.

• Do not discard old battery packs with general household garbage.

- Bring used battery packs with terminal port taped for insulation to DoCoMo shops etc. or follow the local
municipality instruction of battery recycling program.

• Store the battery pack where has no direct sunlight and cold place.

- Store battery pack with run out, detached from FOMA terminal or the adapter (including battery
charger), and wrapped with packing material when not using for a while.

Handling adapter (including battery charger)

• Do not charge the battery in the following areas:

- Where the ambient temperature is less than 5 degrees C or more than 35 degrees C.

- In areas of excessive humidity, dust or vibrations.

- Near fixed-line phones, TVs or radios.

• It is normal for the adapter (including battery charger) to become warm during charging. Keep charging.

• When using the DC adapter for charging, keep the vehicle engine running.

- The vehicle's battery may possibly be dead.

• Do not give strong impact. Also do not change the shape of the charging terminal port.

- May cause malfunction.

• When using an outlet with a mechanism preventing unplugging, follow the handling instructions for that

outlet.

* miniSD memory cards are optional accessori es.P361

18

Handling UIM (FOMA card)

• Do not force UIM (FOMA card) when removing UIM (FOMA card).

• Do not place an excessive pressure when inserting UIM (FOMA card) into the terminal.

• It is normal for UIM (FOMA card) to get warm in use. Keep using.

• Note that DoCoMo will not be responsible for malfunctions occurring as the result of inserting and using

UIM (FOMA card) with another IC card reader/writer.

• Always keep IC device part of FOMA terminals clean.

• Clean UIM (FOMA card) with a soft, dry cloth.

• Keep a separate record of the data you register on UIM (FOMA card).

- DoCoMo assumes no responsibility for accidentally erased data.

• To preserve the environment, bring the used UIM (FOMA card) to DoCoMo shops etc.

• Avoid extremely high or low temperature.

• Do not touch ICs carelessly, short circuit, or damage IC.

- May cause data loss or malfunction.

• Do not drop or apply a shock on UIM (FOMA card).

- May cause malfunction.

• Do not bend or apply weight on UIM (FOMA card).

- May cause malfunction.

• Do not put any sticker etc. on UIM (FOMA card).

miniSD memory card

• Do not pull out miniSD memory card, give an impact, turn the power off, nor remove the battery pack

while you are using miniSD memory card.

- May damage the data.

• Do not put any sticker etc. on miniSD memory card.

Camera

• If you use FOMA terminal to commit nuisance act and bother people, you may be penalized according

to applicable laws or regulations (nuisance prevention ordinance).

Contents/Safety Precautions

Please be considerate of the privacy of individuals around you when taking and sending photos
using camera-equipped mobile phones.

19

Intellectual property rights

Contents/Safety Precautions

Copyrights and portrait rights

Except for the case protected by copyright laws such as personal use, use of FOMA
terminal to reproduce, alter, or publicly transmit recorded pictures or sounds, or
copyrighted text, images, music or software downloaded from Web sites without the
copyright holder's authorization is prohibited.
Note that taking photos or recordings at some demonstrations, performances or
exhibitions may be prohibited even when only for personal use.
Avoid taking pictures of others with FOMA terminal without their consent or disclosing
recorded pictures of others without their consent to general public through Internet Web
pages, etc., because they may infringe on portrait rights.

Trademarks

Company and product names mentioned in this manual are trademarks or registered
trademarks of their respective holders.

• "FOMA", "mova", "i-motion", "i-mode", "i-gppli", "i-melody", "i-anime", "mopera U", "mopera",

"WORLD CALL", "WORLD WING", "Driving mode", "i-motion mail", "Multiaccess", "i-gppliDX", "i-shot",
"i-area", "Short mail", "Dual Network", "FirstPass", "i-gppli search", "V-Live", "visualnet", "Deco-mail",
"Chaku-motion (Movie ringtone)", "Chara-den", "QUICKCAST", and "FOMA", "i-mode" logos are
trademarks or registered trademarks of NTT DoCoMo.

• Windows is a registered trademark of Microsoft Corporation in the US and other countries.

(The formal name for Windows is the Microsoft® Windows® operating system.)

• Java and all Java -related trademarks are trademarks or registered trademarks of Sun Microsystems,

Inc. in the US and other countries.

• "Multitask" is a trademark of NEC Corporation.

• Catch Phone (Call waiting service) is a registered trademark of Nippon Telegraph and Telephone

Corporation.

• NetFront is the trademarks and the registered trademarks by ACCESS CO., LTD. in Japan and other

countries.

• Jv-Lite is the trademark and registered trademark by ACCESS Co., LTD. in Japan and other country.

• Macromedia, Flash and Macromedia Flash are trademarks or registered trademarks of Macromedia, Inc.

in the US and other countries.

• QR code is a registered trademark of Denso Wave Inc.

• miniSD™ and are trademarks of the SD Association.

(miniSD™ memory card is described as miniSD memory card.)

• Adobe and Reader are US or other countries' Adobe Systems Incorporated trademarks or registered

trademarks.

• G ガイドモバイル, G-GUIDE Mobile, and the logo mark are Gemstar-TV Guide International, Inc. (US)

trademarks in Japan domestic. And G, G-GUIDE, G, G-Code, and each logo marks are registered
trademarks in Japan domestic.

• QuickTime is the registered trademark of Apple Computer, Inc. within US and other countries.

• Other company and product names mentioned in this manual are trademarks or registered trademarks

of their respective holders.

* miniSD memory cards are optional accessori es.P361

20

• The following abbreviations of operating systems (Japanese versions) are used in this manual:

- Windows XP indicates the Microsoft® Windows® XP Professional operating system or Microsoft®
Windows® XP Home Edition operating system.

- Windows 2000 indicates the Microsoft® Windows® 2000 Professional operating system.

- Windows Me indicates the Microsoft® Windows® Millennium Edition operating system.

- Windows 98 indicates the Microsoft® Windows® 98 operating system.

- Windows 98SE indicates the Microsoft® Windows® 98 SECOND EDITION operating system.

- Windows NT Server indicates the Microsoft® Windows NT® Server Network operating system Version

4.0.

- "Windows XP, 2000, Me or 98" may be used to jointly indicate these operating systems.

- Windows 98 is written as a general term of both Windows 98 and Windows 98SE.

Others

•

This product contains Macromedia® Flash™ technology of Macromedia, Inc.
Copyright©1995-2005 Macromedia, Inc. All rights reserved.

• NetFront by ACCESS CO., LTD is installed in this product to provide Internet functionality.

Copyright© 1996-2005, ACCESS CO., LTD.

• This product contains JV-Lite2 by ACCESS CO., LTD. as JAVA Virtual Machine technology.

Copyright© 2000-2005, ACCESS CO., LTD.

• This product contains a module developed by the Independent JPEG Group.

• Advanced Wnn v2 is used for input method for Japanese language which is a product of OMRON SOFT

WARE Co., LTD.
"Advanced Wnn v2"© OMRON SOFT WARE Co.,Ltd. 2003-2005 All Rights Reserved.

• This product is licensed based on MPEG-4 Visual Patent Portfolio License. The use of MPEG-4 Video

Codec function is allowed for personal and nonprofit use only in the following cases:

- Recording movies and i-motions that conform to MPEG-4 Visual Standard (hereinafter referred to as
MPEG-4 Video)

- Playing MPEG-4 Videos recorded personally by consumers not engaged in profit activities.

- Playing MPEG-4 Video supplied from the provider licensed from MPEG-LA.

- For further utilizing such as promotion, in-house use or profit-making business, please contact MPEG
LA, LLC in U.S.

• Licensed by QUALCOMM Incorporated under one or more of the following United States Patents and/

or their counterparts in other nations;

4,901,307 5,600,754 5,267,261 5,506,865 5,710,784

5,504,773 5,416,797 5,568,483 5,228,054 5,778,338

5,109,390 5,490,165 5,414,796 5,544,196

5,535,239 5,101,501 5,659,569 5,337,338

5,267,262 5,511,073 5,056,109 5,657,420

Contents/Safety Precautions

21

Basic package and optional accessories

<Basic package>

Contents/Safety Precautions

FOMA SA700iS
(including the rear cover SA01
and the written warranty)

Instruction manual

Manual

*

Quick Reference Manual is appended on P556.

CD-ROM for FOMA SA700iS

<Optional accessories>

FOMA AC adapter 01
(including written warranty
and operation manual)

Other optional accessoriesP520

22

Desktop holder SA01
(including operation
manual)

Battery pack SA01
(including operation
manual)

Before using SA700iS

Names and functions of parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Reading display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Selecting Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

When forgetting Key operation<Functions guide> . . . . . . . . . . . . . . . . . . . . . .35

Using UIM (FOMA card) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Inserting/Removing battery pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Charging mobile phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Checking remaining battery level<Battery level> . . . . . . . . . . . . . . . . . . . . . . .43

Turning power ON/OFF<Power ON/OFF> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Switching display to English<Select language> . . . . . . . . . . . . . . . . . . . . . . . . 45

Initial setting<Initial setting> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Setting date and time<Time and date setting> . . . . . . . . . . . . . . . . . . . . . . . . . .46

Set time by using GPS<GPS time setting>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Notifying your phone number to the other party<CallerID notification> . . . . . 47

Checking your own phone number<View profile> . . . . . . . . . . . . . . . . . . . . . . .48

23

Names and functions of parts

Refer to names and functions of parts as below.

a

Before using SA700iS

b

c

d

i

j
k

r
s

t

u

v
w

x

y

zA B

e

f

l

m
n

o

g
h

a Infrared data port

Used for data exchange with Infrared
communication.

b In-camera

Shoots a self image, or sends a self image with
Video-phone.

c Display P26
d Mail/Left flexible key (m)

Displays Mail menu.
Hold down the key for over a second to display
Compose mail screen.

e Video-phone start (t/Camera key (g)

Makes Video-phone calls.
Hold down the key for over a second to display
the screen to shoot still images.

p
q

DC

Size (mm) Weight (g)

Height 101kWidth 51kDepth 25

(Folding size)

f Voice call start/Hands free key (n)

Makes Voice-phone calls.
Voice is sounded from the speaker. (Hands free function)

g e/Driving mode key (*)

Enter "e", small letters, or voiced sound
symbol.
Hold down the key for over a second to move to
Driving mode.

h GPS key (s)

Displays GPS menu.
Hold down the key for over a second to position
the present location.

•GPS button displayed on FOMA terminals is

described as GPS key in this manual.

i Earpiece

Voice of the other party comes out.

Approx. 117

* miniSD memory cards are optional accessori es.P361

24

j Cursor key (A)

Center key (C)

Executes the operation, or selects menu items.
Hold down the key for over a second to set Side
keys Valid/Invalid.

Phonebook/Up cursor key (U)

Displays Phonebook search screen.
Adjusts the volume. Selects the upper items.
Hold down the key for over a second to add a
new entry to Phonebook.

Down cursor key (D)

Adjusts the volume. Selects the lower items.

Received calls/Left cursor key (L)

Displays Received calls. Switches screens.
Selects the items to the left. Hold down the key
for over a second to display Received address
history.

Redial/Right cursor key (R)

Displays Redials. Switches screens. Selects
the items to the right. Hold down the key for
over a second to display Sent address history.

k i-mode/Right flexible key (p)/i-gppli key

(h)
Displays i-mode menu.
Hold down the key for over a second to display i-

g

ppli folder list.

l Task menu key (a)

Displays Task menu.

m Power/On-hold/End key (f)

Hold down the key for over 2 seconds to turn the
power ON/OFF.
Ends a call.
Holds a call by pressing during a call.
Ends to display menu, etc.

n Clear key (c)

Deletes entered characters, or returns to the
previous screen.

o Keypads (1 to 0)

Enters Phone number.
Enters characters or numeric.

p f/Manner mode/Linefeed key (#)

Enter "f".
Holds down the key for over a second to move
to Manner mode.
Press the key on character input screen to feed
a line.

q Mouthpiece/Microphone

Sends your voice through Mouthpiece.
Use as Microphone during recording movies or
sound.

•Do not cover here. The other party may not

receive your voice clearly, or sounds may not be
recorded properly.

r Incoming-call/Charge/Shoot lamp

Turns on (blinks) during incoming calls,
shooting, or charging.

s Flash/Light

Adds light intensity during shooting.

t Out-camera

Shoots still images or movies, or sends images
of landscapes during a Video-phone call.

u Backside-displayP29
v Strap hole
w Speaker

Ring tone comes out.
Voice of the other party comes from here in
Hands free function.

x Rear cover
y Charging terminals

Used for charging with a desktop holder.

z Side key () ( ボイス(Voice))P26
A Side key (()P26

Hold down ( for over a second and enter "c".

B miniSD memory card slotP361

Insert miniSD memory card.

C Earphone/Microphone jack

Used by inserting Flat plug Earphone/
Microphone (optional).

•

Conventional Earphone/Microphone can be used

with a change adapter (optional) of Earphone jack.

Connecting to the Earphone/Microphone with flat switch

D External connection terminal

Charges by connecting AC adapter.
Connects to PC with FOMA USB cable
(optional).

INFORMATION

• Describes operation procedure based on Key

illustration.

• Refer to the inside of the rear cover to "Inserting/

Removing UIM (FOMA card)" or "Attaching/

Removing battery pack". P36, 38

• The antenna is built-in to FOMA terminal. Do not

cover with hands etc. on built-in antenna during a

call or using i-mode.

Built-in antenna

Before using SA700iS

25

Operations available with Side keys

Main operations with pressing Side keys ((, )) of FOMA terminals are as below.

Status Operation Operation result

Opening FOMA terminal
Stand-by display Hold down ( for over a second. Enters "c" to make an international call.

Before using SA700iS

Stand-by display

Selecting Phonebook/Mail/
Text memo

Various list screen,
detail screen

Playing Ring tone/
Notification sound

Alarm sound

During a video-phone,
Shooting still/movie images

Folding FOMA terminal

*1

Some screens may not be operated.

*2

Operations are to be same when folded.

*1

*2

*2

– Press (. Switches Backside-display.

– Press ).

Press ). Notifies Time, Missed calls or Receiving

mails with sound/voice.

Hold down ) for over a second. Reads out contents with voice.

Press (, ). Scrolls screens.

Stops Ringtone/Notify tone.

Stops Alarm sound.

Adjusts Brightness.

Notifies Time, Missed calls or Receiving
mails with sound/voice.

Reading display

Displays the current mode or various Marks (Icons) to indicate the status of FOMA terminals
such as battery level on screen.

abcdefghijklmnop

Icon field

Status/Mode of FOMA terminal is displayed on Stand-by
display.

qrstuvwxyzABCD

Soft key field

Ｍａｉｌ

ＭａｉｎＭｅｎｕ

ｍｏｄｅ

Available operations are displayed with Left/Right flexible
keys.

INFORMATION

• Displays only one prior function (status) even activating multiple functions (status) of the same field.

• The 2nd line (q to D) of the Icon field is not displayed while playing Flash movies or i-motion.

* miniSD memory cards are optional accessori es.P361

26

 Display icon list

Icons Description

a Battery level P43

Charging

Not charging normally.

b Radio wave condition level P44

Outside the service area or under

poor radio wave condition.

Under Self mode P136

c Positioning/Providing/Notifying

Location P307

Periodical notification setting P325

Providing location settingP319

Setting periodical notification/

Location provide

d Connecting i-mode P185

In packet communication (Stand-

/

by)/(Connecting) P444

In packet communication (Sending)

e

f During a voice-call P49

g Mails saved in the i-mode Center

h Inbox full P254

i UIM (FOMA card)(SMS) full P280

j Saved unread MessageR (colored

k Saved unread MessageF (colored

Displaying SSL page/Executing software
downloaded from SSL

During a Video-phone call (64K) P75

In 64K data communication P444

In Infrared communication P378

(Mail icon colored orange with mail
box full) P244

MessageR saved in the i-mode

Center (R-mark colored orange with

Message full) P211

MessageF saved in the i-mode

Center (F-mark colored orange with

Message full) P211

Unread i-mode mails saved in Inbox
P254

Unread i-mode mails/SMS saved in
Inbox P254, 277

Unread SMS saved in Inbox P277

orange with fullP211

orange with fullP211

P187

Icons Description

l In USB hands free P59

USB connection status (Print mode)

(colored grey without connecting

USB) P388

USB connection status (Data
communication mode) P446

USB connection status (miniSD mode)

(colored grey without connecting
USB) P370

m miniSD card connected (colored

(orange)

n Terminal link (inserting except UIM

o Under Secret mode (colored orange

p Saved Missed calls P70

q Setting Alarm P398

r Setting Schedule alarm P406

s Setting ToDo alarm P411

t

u

v In PIM lock P136

w

x In All lock P135

y Under Driving mode P69

z

A

B

C Setting Phone receive call vibrator

D

orange in Refer/Access mode)
P361

Unable to find attached miniSD card

Unable to find referred miniSD card

(FOMA card))

when editing Secret data) P138

Setting Record message (numeric is

/

the number of messages/colored
orange in full) P71

Voice mails in Center (numeric

/

indicates more than 2 messages)
P433

Keypad dial lock P137

Under Manner mode (Time's passed

/

OFF mode/Setting Duration) P115

Under Manner mode (Silent vibrator)

(red)

Under Manner mode (Sleep ON/

/

Original manner) P115

(green)

Setting Phone receive call volume OFF
P111

ON P111

In Side key operation set to Invalid P138

P114

Before using SA700iS

27

Soft key

Operates or sets with Soft keys displayed on the lower field of screen of Stand-by display or in operation.
You can use Left flexible key (m), Right flexible key (p) and Center key (C) to execute Soft key
function.

• Soft key function differs from operations.

Before using SA700iS

SelectEdit

Function

 Executing Soft key a function

Press m.

Describes as "m [Edit] " in this manual. Inside of [ ] ([Edit], etc.)
is the function of Soft key.

ab

c

 Executing Soft key b function

Press C.

"u" or "v" to the right of Soft key indicates the existence of items
to select. Press the cursor key (A) to select, and press C.

 Executing Soft key c function

Press p.

Describes as "p [Function] " in this manual. Inside of [ ]
([Function], etc.) is the function of Soft key.

Task icon

The icon of currently activated or operated function is displayed. (Task icon)
Multiple icons are displayed during activating multiple functions. P396

For example, Task icon indicating Phonebook is displayed during

displaying Phonebook.

Ｐｈｏｎｅｂｏｏｋ

 Task icon list

Icons Description Icons Description

Dialing up

Dialing/Receiving a voice-call/During a call Activating Still image shooting

Making/Receiving a call/During a 64K

Video-phone call

Schedule alarm Activating Bar code reader

ToDo alarm Activating Character reader

Alarm Activating Calculator

Viewing Mail/Message, Setting mails Activating Jpn-Eng dictionary

Composing Mail/SMS Activating Eng-Jpn dictionary

Checking i-mode mail, Receiving/Sending i-

mode mail, Receiving/Sending MessageR/F

Checking SMS, Receiving/Sending SMS Activating Vocabulary quiz

Under i-mode Activating Word recognizer

 ０００

Current time is displayed.

Displaying Sent/Received address history,

Received calls/Redial

Activating Movie recording

Activating Kana-English dictionary

* miniSD memory cards are optional accessori es.P361

28

Icons Description Icons Description

Displaying Bookmark Activating Voice recorder

Activating i-gppli software Displaying contents in miniSD memory card

Activating GPS function Activating Record message

Displaying Profile Activating Record voice memo in stand-by

Displaying Data box Playing Record message during a call

Displaying "My picture" folder Activating Text memo

Displaying "i-motion" folder Activating Dial memo

Displaying "Melody" folder Playing Record message in stand-by

Displaying "Chara-den" folder Exchanging data (stand-by)

Displaying "Original data" folder Print mode

Displaying Phonebook Updating Software (stand-by)

Displaying Calendar Various setting

INFORMATION

• FOMA terminal screens are manufactured with highly advanced technology, however, some dots may be

always or never lit. Please be forewarned this phenomenon is not malfunction.

Reading Backside-display

Displays radio wave condition, battery level, time or status of FOMA terminals on Backside-display. Also,
displays calling status or receiving mail with animation.

Before using SA700iS

Press ( with FOMA terminal folded.

1

• Switch the display as follows by pressing ). Press ( on Status screen and the light is turned off.

Light OFF Clock screen Status screen

29

Status screen of FOMA terminal

Icons and animations displayed on Backside-display are as below:

Before using SA700iS

 Backside-display icon list

Icons Description Icons Description

Battery level (4 levels of 0 to 3) P43

Radio wave condition P44

Connecting i-mode P185 Under Driving mode P69

Out of service area

Unread i-mode mails/SMS saved P254,

P277

Unread MessageR saved P211 Under Manner mode (Sleep) P115

Unread MessageF saved P211

In SSL communication P187

Setting Secret mode P138

Saved Missed call P70 Setting Alarm P398

Setting Record message (numeric is the

number of message) P71

Saved Voice mail (numeric is the number

of messages) P433

In PIM lock P136

Keypad dial locked P137 Setting Location provide P319

miniSD memory card mounted P361

Mounted miniSD memory card unable to find

Under Manner mode (Duration setting) 

Under Manner mode (Time's passed OFF) 

Under Manner mode (Silent vibrator)

Under Manner mode (Original manner)

Setting Phone receive call volume OFF

P111

Setting Phone receive call vibrator ON

Setting Schedule alarm P406

Setting ToDo alarm P411

Setting Periodic notification of Location

information P325

P115

P115

P115

P116

P111

 Notification animation list

Animation Description Animation Description Animation Description

Dialing a

Voice- call

Dialing a Video-

phone call

Alarm Mail Melody

* miniSD memory cards are optional accessori es.P361

30

Receiving a

Voice- call

Receiving a

Video-phone

During a Voice-

phone call

During a

Video-

phone call

INFORMATION

• Backside-display is turned off with FOMA terminal open.

• When setting Side key operation to Invalid, press ( or ) to display "Side key operation Invalid", and the screen

is to be unavailable to switch. (Displays Time and date, Battery level or radio wave condition.)

• If the phone number is saved in Phonebook, the name is displayed when a call is incoming. (When setting

Secret attributes, does not display except under Secret mode.)

• Screen is turned OFF when no operation is done for approximately 10 seconds.

Selecting Menu

Select and then set/activate items from the menu. You can select with Keypads, or with
cursor key and press C on Menu screen.

•

Unable to select the items colored grey of Menu items.

• Press f to return to Stand-by display to cancel selecting/setting.

• To return to the previous screen, press c.

Selecting functions from Menu

Press C on Stand-by display to display Main menu. Select some icons and display Menu/folder list of the
item. Select some items from the list and set.

• Press m, p, s on Stand-by display and each menu is displayed. Sets items along to the same

operation with Main menu.

- m : Displays Mail menu

- p : Displays i-mode menu.

- s : Displays GPS menu.

<ex> Change Ring tone

Before using SA700iS

Press C on Stand-by display.

1

Displays Main menu with 12 icons.

• Press A (up and down, left and right of cursor key) and select icons.

• Icon types of selected items are changed.

ex : Data box

Not

selected

Press A to select , and press C.

2

Ｓｅｔｔｉｎｇｓ

Ｓｏｕｎｄ／Ｖｉｂｒａｔｏｒ

Ｄｉｓｐｌａｙ

Ｓｅｃｕｒｉｔｙ
Ｃａｌｌ／Ｔｒａｎｓｍｉｓｓｉｏｎ
Ｔｉｍｅ
Ｒｅｓｅｔ
Ｖｉｄｅｏ−ｐｈｏｎｅ
Ｃｈａｒａｃｔｅｒ ｉｎｐｕｔ
Ｈｅｌｐ

Various setting screens are displayed.

Selected

See next page

31

Press 1 "Sound/Vibrator", 1 "Volume" and 2 "Phone

Displ

3

receive call".

Volume adjust screen is displayed.

• Numbers on the top of items framed with indicate the number of keypad.

Ｓｅｔｔｉｎｇｓ

Ｓｏｕｎｄ／Ｖｉｂｒａｔｏｒ

Before using SA700iS

Ｄｉｓｐｌａｙ

Ｓｅｃｕｒｉｔｙ
Ｃａｌｌ／Ｔｒａｎｓｍｉｓｓｉｏｎ
Ｔｉｍｅ
Ｒｅｓｅｔ
Ｖｉｄｅｏ−ｐｈｏｎｅ
Ｃｈａｒａｃｔｅｒ ｉｎｐｕｔ
Ｈｅｌｐ

112

 Selecting with cursor key

Press J (Up/Down cursor) to select items, and press C.

• Selected items are highlighted.

Press J to adjust volume and press C.

4

Ｖｏｌｕｍｅ
Ｅａｒｐｉｅｃｅ ｖｏｌｕｍｅ

ＬＥＶＥＬ５

Selecting multiple items

When selecting multiple items such as Delete option, select files and press C to change to . Select
all files to delete along the same operation, and activate.

Ｃａｍｅｒａ

  ２００５−１２−２４＿２２−４５

２００５−１２−２０＿０７−０８
  ２００５−１２−１７＿２０−３２
  ２００５−１２−１１＿１１−２０
  ２００５−１２−０７＿１４−３５
  ２００５−１１−１４＿１２−４２
  ２００５−１１−０８＿１１−３６

1／1

Ｓｏｕｎｄ／Ｖｉｂｒａｔｏｒ

Ｖｏｌｕｍｅ

Ｓｏｕｎｄ

Ｖｉｂｒａｔｏｒ
ＬＥＤ
Ｎｏｔｉｃｅ ｔｉｍｅ
Ｍａｎｎｅｒ
Ｃｏｎｎｅｃｔｉｏｎ ｖｉｂｒａｔｏｒ

Ｃａｍｅｒａ

２００５−１２−２４＿２２−４５
  ２００５−１２−２０＿０７−０８
  ２００５−１２−１７＿２０−３２
  ２００５−１２−１１＿１１−２０
  ２００５−１２−０７＿１４−３５

  ２００５−１１−１４＿１２−４２

  ２００５−１１−０８＿１１−３６

1／1

Ｖｏｌｕｍｅ              １／ 3

Ｅａｒｐｉｅｃｅ ｖｏｌｕｍｅ

Ｐｈｏｎｅ ｒｅｃｅｉｖｅ ｃａｌｌ
Ｖｉｄｅｏ−ｐｈｏｎｅ ｒｅｃｅｉｖｅ
Ｐａｙｐｈｏｎｅ ｒｅｃｅｉｖｅ ｃａｌｌ

Ｕｓｅｒ ｕｎｓｅｔ ｒｅｃｅｉｖｅ
Ｎｏｔ ｓｕｐｐｏｒｔ ｒｅｃｅｉｖｅ

Ｒｅｃｅｉｖｅ ｍｅｓｓａｇｅ
Ｒｅｃｅｉｖｅ ｍｅｓｓａｇｅＲ
Ｒｅｃｅｉｖｅ ｍｅｓｓａｇｅＦ

Ｖｏｌｕｍｅ
Ｅａｒｐｉｅｃｅ ｖｏｌｕｍｅ

ＬＥＶＥＬ３

Selecting functions from Function menu

When displaying Menu screen or activating functions, "Function" may be displayed as Soft key. Press p
(Right flexible key) to operate.

Press p while displaying the softkey "Function" on the screen.

1

Ｐｈｏｎｅｂｏｏｋ

Ｂａｓｉｃ Ｓｐｅｃｉｆｙ Ｏｔｈｅｒｓ

Ａｉｄａ Ｓｈｏｔａ

［名前］

Ｇｒｏｕｐ ０

Ｅｄｉｔ Ｓｅｌｅｃｔ

 ００１

 ０６ＸＸＸＸＸＸＸＸ

Ｆｕｎｃｔｉｏｎ

Ｐｈｏｎｅｂｏｏｋ           ００１

基本 指定 その他

Ｆｕｎｃｔｉｏｎｓ        １／２

相田翔太

 Ｃｏｍｐｏｓｅ ＳＭＳ ｍｓｇ

［名前］

Ｅｘｐｏｒｔ
 Ｓｅｎｄ ｉｎｆｒａｒｅｄ ｄａｔａ

 ０６ＸＸＸＸＸＸＸＸ

 Ｃｏｐｙ ｔｏ ＵＩＭ

０

グループ

 Ｒｅｇ．

ｔｏ ｓｃｈｅｄｕｌｅ

Ｃｏｐｙ ｉｔｅｍ
 Ｄｅｌｅｔｅ

ＯＫ

Ｆｕｎｃｔｉｏｎ

ays Function menu.

32

 For multiple pages such as Function menu

Press R to display the next page, or press L to display the previous page.

Ｐｈｏｎｅｂｏｏｋ           ００１

基本 指定 その他

Ｆｕｎｃｔｉｏｎｓ        １／２

相田翔太

 Ｃｏｍｐｏｓｅ ＳＭＳ ｍｓｇ

［名前］

Ｅｘｐｏｒｔ
 Ｓｅｎｄ ｉｎｆｒａｒｅｄ ｄａｔａ

 ０６ＸＸＸＸＸＸＸＸ

 Ｃｏｐｙ ｔｏ ＵＩＭ

０

グループ

 Ｒｅｇ．

ｔｏ ｓｃｈｅｄｕｌｅ

Ｃｏｐｙ ｉｔｅｍ
 Ｄｅｌｅｔｅ

ＯＫ

Ｆｕｎｃｔｉｏｎ

Press the number on keypad or J to select, and press C.

2

Ｐｈｏｎｅｂｏｏｋ

コード変更

ＰＩＮ１

Ｆｕｎｃｔｉｏｎｓ    

ＰＩＮ２

コード変更

 Ｓｅｎｄ ｐｕｓｈ ｔｏｎｅ

ＰＩＮ１

コード入力設定

 Ａｃｃｅｐｔ／Ｒｅｊｅｃｔ ｃａｌｌ

   ００１

２／２

Ｃｌｏｓｅ

Next/previous pages are displayed.
Press J to select an item.
Displays "current page/total pages" on
the right top of the screen with multiple
pages.

INFORMATION

• Press p to display the next page. Press on the last page to close Function menu.

Displaying information from Notify icon < Notify icon>

When a call missed or a mail received, Notify icons and descriptions are appeared on Stand-by display to
notify information quickly.

<ex> Missed calls

Press D when displaying "New notice found".

1

Displays the information to notify.

• When only Notify icons appear, press D to display information to notify.

Before using SA700iS

Ｎｅｗ ｎｏｔｉｃｅ ｆｏｕｎｄ

Notify icon Notifying information

Ｍｉｓｓｅｄ ｃａｌｌｓ

 １

 Multiple Notify icons

Press S while the information displayed, then the other information will be switched to display.

Press C.

2

Missed calls history list screen is displayed.

See next page

33

 Notify icon list

• The chart below indicates the case when the single information is notified.

Icons Notifying information Screen after selected/operated

Missed calls screen is displayed. If Dialed/received calls setting is

set to "OFF", a message is displayed.

Displays a schedule (Schedule list is displayed for 2 or more schedules.)

Before using SA700iS

Missed calls 1

Voice mail received Displays Check screen for Play voice message.

Record message 1 Displays for Record message list screen.

New mail 1 Displays folders in where the current i-mode mail/SMS are saved.

MessageR 1 Displays MessageR list screen.

MessageF 1 Displays MessageF list screen.

Auto start failed Displays a message failed to start i-gppli automatically.

Schedule alarm 1

ToDo alarm 1 Displays ToDo. (ToDo list is displayed for 2 or more ToDo.)

Alarm 1 Displays unchecked Alarm list.

Update complete Displays a message for completing software update.

Check update with description Displays the reason etc. not to complete updating software.

Missed location/No response 1 Displays location history.

Displaying information with FOMA terminal folded

Information of Notify icon can be displayed on Backside-display.

• Voice/Sound is not heard under Manner mode.

<ex> When receiving mails

Press ( ( ボイス (Voice)) with FOMA terminals folded.

1

Displays the number of received mails.

• Displays multiple icons each time ) is pressed.

Nｅｗ ｍａｉｌ
ｒｅｃｅｉｖｅｄ

INFORMATION

• Notify icons are not displayed when receiving a call or stopping alarm.

• Icons are cleared when selecting/operating Notify icons.

• The information of Notify icons can be confirmed with voice/sound. P429

• Main menu is not displayed by pressing C when displaying notifying information. Press U to clear notifying

information and press C.

34

Operation procedure description

Describes operation procedure as below in this manual.

<ex1>

Press C s Press s Press 1.

1

Operation procedure of <ex1> is as follows.

Press C (Center key operation) on Stand-by display at first.
Press A, select , and press C.
Press 1 (1st selection of Menu) at the last.

<ex2>

Press p [Function] s Press R s Press 3 "Sort files".

2

Operation procedure of <ex2> is as follows.

Press p (Right Soft key operation) at first.

• Displays the function of Soft key within [ ] when pressing Right/Left flexible keys.

Press R to display the next page.
Press 3 (Select "c Sort files") at the last.

Before using SA700iS

INFORMATION

• Function of Center key is omitted and describes as "C" only.

• Operation procedure to press f to close Menu after setting is omitted.

• Confirmation message may be displayed depending on the setting. Confirmation message is cleared after

approximately 5 seconds, and also can clear by pressing C. (Omitted from operation Step)

Functions guide

When forgetting Key operation

• For details, refer to each operation procedure of this manual as described later.

Press C s Press s Press 9 s Press 7.

1

Ｆｕｎｃｔｉｏｎｓ ｇｕｉｄｅ    １／２３

Ｖｉｅｗ ｐｈｏｎｅｂｏｏｋ

Ｐｒｅｓｓ    ｉｎ ｓｔａｎｄ−ｂｙ

Displays Functions guide screen.

See next page

35

Press S to display Functions guide.

2

Switches items each time by pressing the key.

• Press C to close.

Before using SA700iS

Using UIM (FOMA card)

User's information such as phone number is recorded in UIM (FOMA card).

Inserting/Removing UIM (FOMA card)

• Turn the power off, remove battery pack and fold FOMA terminals to insert/remove UIM (FOMA card).

P38

Inserting

Insert UIM (FOMA card) slowly all the way seated as the figure below.

1

Correctly
inserted

Notch die

IC

Removing

Press UIM (FOMA card) attached to the slot into lightly.

1

Pull out UIM (FOMA card) along to the horizontal direction as the

2

FOMA card slot

Face FOMA card
IC side down

• UIM (FOMA card) is fixed as the position of the left

figure when properly inserted.

arrow of the figure below.

Push once
before removing

* miniSD memory cards are optional accessori es.P361

36

INFORMATION

• Note that not to lose removed UIM (FOMA card).

• Be careful not to force to insert or remove UIM (FOMA card), or FOMA terminal (FOMA card slot) or UIM

(FOMA card) may be damaged.

UIM security codes

The PIN and PIN2 codes are used for the UIM (FOMA card).

PIN code : You can set to enter every time the power is turned on for privacy protection.

PIN2 code : Enter for personal authorization on sites or Internet.

• Both codes are set to "0000" by default, however, can be changed to any 4 to 8 digits.

• Enter PIN lock release code when PIN code is locked. P133

UIM (FOMA card) operation restrictions

UIM (FOMA card) operation restrictions are for protection of user's data or files.
When downloading data or files from sites or Internet homepages with UIM (FOMA card) attached, UIM
(FOMA card) operation restrictions are automatically set to downloaded items.

• You cannot display or play data/files with UIM (FOMA card) operation restrictions when another UIM

(FOMA card) is attached or UIM (FOMA card) is removed.

• Data types restricted operation by UIM (FOMA card) are as below:

-Image -i-motion

- Melody - Screen memo - Files attached to i-mode mail - Frame/Stamp

-i-gppli - Chara-den - Animation (Flash movie) - Menu icon

- Dictionary data

- National holidays

INFORMATION

•

Following data are not restricted operation by UIM (FOMA card); data or files retrieved by Infrared/miniSD memory card/

Data link software, images shot by FOMA terminal built-in camera or edited images are not effected by file restriction.

•

Images/i-gppli/Chara-den/Melody preinstalled in FOMA terminal are not restricted operations, however, to be restricted

when deleting once and downloading again.

•

When setting data restricted UIM (FOMA card) operation to Stand-by display/Call or receive display/Ring tone, and starting

FOMA terminal with attaching to another UIM (FOMA card) or removing UIM (FOMA card), the data returns to default.

- Images inserted in Deco-mail text

- Deco-mail template

- MessageR/F
(with attachments)

Before using SA700iS

Functional differences between UIM (FOMA card)

Functions of 2 types (green and blue) of UIM (FOMA card) are different as below:

Item

Number of digits of phone number enable to register

to UIM (FOMA card) Phonebook

Client certificate to use FirstPass Available Unavailable

WORLD WING Service Available Unavailable

Service dialing no. Available Unavailable

UIM (FOMA card) (green)

Up to 26 digits Up to 20 digits

UIM (FOMA card) (blue)

See next page

37

 WORLD WING

d

WORLD WING is the DoCoMo FOMA international roaming service. By removing UIM (FOMA card/Green) from

the FOMA terminal for usual use and inserting the card into overseas mobile phone (GSM handset), you can

make/receive a call outside of Japan using the same phone number. WORLD WING is required to optional

subscription. Some price plans cannot be applied. Contact "DoCoMo Information Center" on the back of this

manual for details.

Before using SA700iS

Inserting/Removing battery pack

• Turn the power off to insert/remove the battery pack.

Inserting

Slide and remove by holding down the double guideline on the rear

1

cover.

a

Double guideline

b

Rear cover

Fit the battery pack in with the printing surface on top.

2

Hold down to the direction of a, slide to b and
remove.

To fit the metal terminals of the battery pack and
FOMA terminal, hold down to the direction of c, and
fit in to d.

38

ccc

Attach the rear cover.

3

d

d

Mount the tab of the rear cover to fit to the groove
with 3mm gap, slide until the click sound is heard.

Removing

Remove the rear cover and the battery pack.

1

Ta b

INFORMATION

• The jack of FOMA terminal may be broken when forcing to mount the battery pack.

• Fold FOMA terminals to mount or remove the battery pack.

Push up the tab of the battery pack, pull up to the
arrow direction and remove.

• Follow the same procedure of attaching to remove

the rear cover.

Charging mobile phone

• The battery pack is not charged full by default. Be sure to use AC/DC adapter for FOMA terminal

to charge the battery before using FOMA terminal.

Reminder for charging

Effective usage of the battery pack

Use the battery pack exclusive for FOMA terminals.

• For details on handling the battery pack, refer to the battery pack manual.

• In the extremely low, or high temperature such as in the closed cars in summer time, battery power

reduces and shortens the time for use. Also life span is shortened. Use in normal temperature.

• Battery pack life is limited. When the battery pack is charged and not recovered the original power or

only can use for limited time, the battery pack is out of life. Purchase a new battery pack of the specified
type.

• The battery pack life is approximately 1 year. However, life span may be shortened depending on usage

frequency.

Before using SA700iS

To promote environmental conservation, be sure to return your used battery pack to
NTT DoCoMo sales outlets, our corporate agencies or the shops that collect used
battery in your community.

Charging

Do not charge the battery for an extended period (several days) with FOMA terminal powered on.

•

When charging for an extended period with FOMA terminal powered on, the power is supplied from the
battery pack of FOMA terminals after completing charge. Alarm may be sounded to use only for a short
period of time because the battery is used. In this case, charge with the correct procedure. Before
charging the battery again, remove FOMA terminal from AC adapter (or desktop holder) or DC adapter
and reconnect it.

• Charge the battery when not using for a long time.

• With FOMA terminals powered on during charging, phone calls or mails can be received. However,

charging time is to be longer.

• The battery pack cannot be directly charged. Be sure to charge with mounting to FOMA terminals.

39

Charging time/Available time for use (in full charge)

 Charging time

• The period of time is for charging an empty battery pack with FOMA terminal powered off.

FOMA AC adapter 01 FOMA DC adapter 01

Approx. 120 minutes Approx. 120 minutes

Before using SA700iS

 Available time for use (in full charge)

• Available time for use depends on the use environment.

Continuous stand-by

time (stationary)

Approx. 330 hours Approx. 250 hours Approx. 140 minutes Approx. 90 minutes

Continuous stand-by

time (moving)

Continuous call time

(during a voice call)

Continuous call time

(during a video-phone call)

• Continuous call time indicates the approximate call time that FOMA terminal can send or receive radio

wave normally.

• The continuous stand-by time is approximate time to move with FOMA terminals folded in normal radio

wave condition. The call (communication)/stand-by time may be reduced to about half depending on the
battery charge condition, function settings, operating environment such as atmospheric temperature,
radio wave condition in the place of use (radio waves do not or hardly reach), etc. Using i-mode
communication reduces the call (communication)/stand-by time.

• When composing mails, starting i-gppli, in data communication, using Camera or executing Multi-

access, the call (communication)/stand-by time is reduced.

Charging with AC adapter/DC adapter

Charge with optional AC adapter, DC adapter or Desktop holder.

• Be sure to also read the manual of the FOMA 01 AC adapter (optional) or 01 DC adapter (optional).

• Fit in the battery pack to FOMA terminals.

<When charging with AC adapter>

AC100V output

40

External connection port

Power plug

Release button

External connection
terminal cover

Connector (Insert flatly with turning
the designed side up.)

AC adapter

<When charging with DC adapter>

External connection port

Cigarette lighter socket

Power plug

DC adapter

Open the cover of External connection terminal of FOMA terminal.

1

Insert the connector of AC adapter or DC adapter with the arrow mark

2

on top into External connection terminal of FOMA terminal.

• Insert flatly until the click sound is heard.

Unfold the AC adapter's power plug and insert into AC outlet.

3

For DC adapter, insert the plug into Cigarette lighter socket of a car.

Starting sound of charge is played, lights on Charging lamp and the charge starts.

Remove the charger plug of AC adapter from AC outlet after

4

completing charge.
For DC adapter, remove the plug from Cigarette lighter socket.

Release button

Connector (Insert flatly with turning
the designed side up.)

External connection
terminal cover

Before using SA700iS

With pressing the button of the both sides of the connector, remove

5

the connector from FOMA terminals.

Close the cover of External connection terminal of FOMA terminal.

6

See next page

41

INFORMATION

• Red lamp is lit during charging. The lamp is turned off after completing charge.

• Charge lamp is not lit immediately after starting charging. However, if the light fails to light after a few minutes,

disconnect FOMA terminal from AC adapter (or desktop holder) or DC adapter then reconnect to start charging.

• FOMA terminal, battery pack and AC adapter may become warm during charging and that phenomenon is

normal.

Before using SA700iS

• Charge start/completion alert does not sound under Manner mode, Driving mode or with the power turned off.

• Connect AC adapter to AC 100V outlet.

• Do not use DC adapter when the vehicle's engine is not running. May cause the car battery to be discharged.

• Do not force to remove/insert the connector.

• The fuse (2A) of the DC adapter is a consumable part. Contact your nearest automotive supply stores for

replacements.

• Always use DC adapter with a negative-ground vehicle. Never plug it into a positive-ground vehicle.

• Data saved/registered in FOMA terminal remains about 1 month with the battery pack removed or battery

empty. The data may be lost over 1 month. For data may be lost due to failure, repair or other handling of FOMA

terminal, it is recommended to maintain a separate record of the data registered in your FOMA terminal.

DoCoMo assumes no responsibility for the loss of any data saved or registered.

Charging with Desktop holder

Charge the FOMA terminal with Desktop holder (optional).

• Be sure to read the manual of SA01 (optional) of the desktop holder.

AC100Voutput

42

Power plug

Charging lamp

AC adapter

Connector (Insert flatly with
turning the designed side up.)

Insert the connector of AC adapter into the jack of the desktop holder.

1

Insert the power plug of AC adapter into AC outlet.

2

Set FOMA terminal on the desktop holder.

3

The charge starts with a sound and the charging lamp lights up.

• Insert the connector until it clicks.

After charging

Pull out the FOMA terminal to the direction of the arrow and remove

4

from the desktop holder after completing charging.

INFORMATION

• Set the FOMA terminal on a desktop holder firmly.

• Connect AC adapter to AC 100V outlet.

• Do not pinch the strap etc. when setting FOMA terminal to a desktop holder.

• Cannot charge the battery using the desktop holder alone.

• FOMA terminal, battery pack and AC adapter may become warm during charging and that phenomenon is

normal.

• Charge start/completion alert does not sound under Manner mode, Driving mode or with the power turned off.

• Place the desktop holder on the flat surface to use. Fold FOMA terminal when setting on/removing from the

desktop holder.

• Remove the AC adapter from the outlet when not using for an extended period.

Battery level

Checking remaining battery level

The icon is displayed indicating remaining battery level.

•

The remaining battery level display is only for approximate levels.

 On screen

(Battery level 3) : Enough for use

(Battery level 2) : Lower

(Battery level 1) : Hardly remained

(Battery level 0) : No battery

Before using SA700iS

 On Backside-display

When FOMA terminal is folded, press ( or ) to display.

(Battery level 3) : Enough for use

(Battery level 2) : Lower

(Battery level 1) : Hardly remained

(Battery level 0) : No battery

Checking remaining battery level by sound and display

• Charging tone is not sounded during charging.

Press C s Press s Press 9 s Press 3.

1

Battery level is displayed and charging sound is played.

Ｂａｔｔｅｒｙ ｌｅｖｅｌ Ｂａｔｔｅｒｙ ｌｅｖｅｌ Ｂａｔｔｅｒｙ ｌｅｖｅｌ

Battery level 3

Beep sounds 3 times (Battery level 3)
Beep sounds 2 times (Battery level 2) : Lower
Beep sounds once (Battery level 1) : Hardly remained

Battery level 2 Battery level 1

: Enough for use

See next page

43

INFORMATION

• When Keypad sound is set to "OFF" under Manner mode, battery level checking sound is not made.

When battery is out

Before using SA700iS

Ｐｌｅａｓｅ ｒｅｃｈａｒｇｅ

INFORMATION

• When the battery is about to run out during a call, a message is displayed and the call is disconnected in

approximately 20 seconds.

• If the battery is almost run out while downloading data, download may be aborted with Alert tone.

• No Alarm tone is sounded under Manner mode or Driving mode.

• When the battery is run out with Alarm tone, editing data (Phonebook, Schedule, ToDo, Text memo, Profile and

Location service clients) are temporarily saved.

Power ON/OFF

When the battery is almost exhausted, a message is displayed on the
screen and Alarm tone sounds.

• After displayed the message, the power is turned off in approximately

one minute.

• Press any key to stop Alarm tone.

Turning power ON/OFF

Turning power ON

44

Hold down f for over 2 seconds.

1

Ｍａｉｌ

ＭａｉｎＭｅｎｕ

ｍｏｄｅ

Stand-by display

Turning power OFF

Hold down f for over 2 seconds on Stand-by display.

1

Displays the animation, and then Stand-by display.

 When " 圏外 (Out of service area)" is displayed

You are in outside the service area and where radio waves are hard
to reach. Move to the place in good radio wave condition.

• Displays the receiving level icon on the screen. See the icon for as the

approximate measure.

(High)   (Weak)  (Out of service area)

INFORMATION

• Even in displaying , connection may be disconnected.

• Radio wave condition is not settled when making a call in moving. As the digital communication features, the

connection may be terminated without notice. It is recommended to use in the place where is displayed.

• Enter PIN code screen is displayed with PIN code setting "ON". Enter PIN code and Stand-by display appears.

• Time and date is not set by default. Set Time and Date.

• When FOMA card is not mounted, a message appears notifying to insert UIM (FOMA card). Turn the power

off, mount UIM (FOMA card) correctly, then turn on the power again.

Select language

Switching display to English

Default Japanese

Switch the language to display function names or messages on the screen.

Press C s Press s Press 9 s Press 4.

1

Ｓｅｌｅｃｔ ｌａｎｇｕａｇｅ   

日本語

Ｅｎｇｌｉｓｈ

Press 2 "English".

2

Switches to English. (The function name "Select language" is displayed as "バイリンガル
(Bilingual)" in Katakana.)

 Returning to Japanese

a Press C s Press s Press 9.
b Press 4 " バイリンガル (Bilingual)".

Displays バイリンガル(Bilingual) screen.

c Press 1 " 日本語 (Japanese)".

INFORMATION

• Select language setting is recorded in UIM (FOMA card) when UIM (FOMA card) is inserted into FOMA

terminal.

Select language screen is displayed.

Before using SA700iS

Initial setting

Initial setting

Set Time and date setting, Security code setting, or Keypad sound when turning the power
on for the first time.

•

Initial setting is not displayed by resetting.

When Time and date setting screen is displayed, enter Year/Month/

1

Date and time, and press C.

Change security code screen is displayed. The default setting is "0000".

• Set as the same procedure with "Time and date setting". P46

See next page

45

Press 1 "Yes" and enter the terminal security code.

2

• Keypad sound setting screen is displayed.

• Operation procedure P131

• Press 2 "No" not to reset.

Press one of 1 to 3.

3

Before using SA700iS

Initial setting screen is displayed.

• Press 4 "OFF" not to sound to as a key pressed.

Press 1 "Start next time" or 2 "Not start".

4

• To start Initial setting every time the power is turned on, press 1 "Start next time".

INFORMATION

• Cannot make Initial setting under Keypad dial lock or All lock.

• If the setting is aborted by receiving a call etc., functions are active for the completed settings.

Time and date setting

Setting date and time

Sets the date and time of FOMA terminal. Date and time setting is displayed on screen or
Backside-display after setting.

•

Date and time can be entered between 0:00, January, 2000 and 23:59, December, 2099.

<ex> Setting to 10:30, December 24th, 2005

Press C s Press s Press 5 s Press 1.

1

Ｔｉｍｅ ａｎｄ ｄａｔｅ ｓｅｔｔｉｎｇ

＿＿：＿ ＿
＿＿／＿＿／２０＿＿

（

ＭＭ／ＤＤ／ＹＹＹＹ

）

Time and date setting screen is displayed.

Enter the last 2 digits of the year, and press C.

2

Sets the date and time.

• Press keypads as "1030122405" here.

• When month or date is a digit between 1 and 9, enter 0 for preceding.

• Press S to highlight, and press keypads or J to set.

INFORMATION

• Following functions are not available when the date and time have not been set:

- SSL session (Authentication)* - i-gppli auto start - i-gppliDX start

- Starting browser from i-gppli - Shooting still/movie images

- Recording Voice recorder - Periodical notification etc.

*

Some sites are available without date/time setting.

• Time and date is to be displayed by setting Date/Time in the following functions.

- Redial - Received calls - Record message - Voice memo during a call /Stand-by

- Received/Sent addresses etc.

• The set time and date are saved even when exchanging the battery pack or running out the battery. However,

the time and date are reset by leaving the battery pack for an extended period. In that case, operate the setting
again.

(ex : For September, enter "09".)

46

GPS time setting

Set time by using GPS

Default OFF

Synchronize time of FOMA terminals correctly by using GPS.

Press C s Press s Press 5 s Press 2.

1

Press 1 "ON".

2

Positioning starts, and the time is to be corrected.

• Press 2 "OFF" not to set.

INFORMATION

• When " 圏外 (Out of service area)" /" " icon is displayed on FOMA terminals, no GPS time setting is

available.

• When GPS time setting is set to "ON", time of FOMA terminals is automatically corrected by every positioning

such as Position location.

• Positioning icon is not displayed for GPS positioning when the GPS time setting is ON.

• Positioning on GPS time setting is not saved to Location history.

CallerID notification

Notifying your phone number to the other party

Displays the phone number of FOMA terminal (CallerID) on the other party's screen in making
a call.

•

CallerID is the important information. Be careful to notify your CallerID information in making a call.

Before using SA700iS

Press C s Press s Press 5 s Press 2.

1

Press 1 "Activate".

2

• Press 2 "Deactivate" not to notify.

Enter the NW security code and press C.

3

Set to notify CallerID.

 Checking current setting

Press C s Press s Press 5 s Press 1.

INFORMATION

•

When "圏外 (Out of service area)" icon is displayed on FOMA terminals, you cannot set CallerID notification.

•

If the guidance message requests the CallerID notification, change the settings to notify CallerID and call again. P54

• Notifies CallerID when the phone of the other party is applicable to CallerID notification.

47

View profile

Checking your own phone number

Check the phone number (Profile) of FOMA terminal.

Press C s Press 0.

1

Before using SA700iS

Ｖｉｅｗ ｐｒｏｆｉｌｅ

Ｏｗｎ ＃ ＰＯＣ Ｉｎｆｏ

［名前］

XXXXXXXX

INFORMATION

• Press C s Press also enable to confirm the profile.

• Can enter the private information except your phone number. P416

 Checking i-mode mail address

a Press p s Press .
b Select "ENGLISH" s Press 4 "Options".
c Press 1 "Mail Settings".
d Select "Confirm Mail Address" and press C.

Displays the phone number of the FOMA terminal.

• The own phone number is displayed by default.

48

Making/Receiving calls

Making calls

Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Calling back previously dialed numbers<Redial> . . . . . . . . . . . . . . . . . . . . . . . 52

Setting whether to notify your phone number for each call . . . . . . . . . . . . . . . 54

Sending push tone quickly<Pause> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Using international calls<WORLD CALL/Prefix> . . . . . . . . . . . . . . . . . . . . . . . .55

Making calls with specifying sub-address<Sub-address> . . . . . . . . . . . . . . . .58

Setting Alarm tone activating in reconnecting interrupted calls

<Reconnect control>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Suppressing ambient noise to make the voice clear<Noise reduction> . . . . . 59

Using Hands free compatible devices<In-car hands free> . . . . . . . . . . . . . . . .59

Receiving Calls

Receiving calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Setting to answer calls by pressing any of keypad

<Any key answer>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Starting calls by opening FOMA terminal<Open to talk> . . . . . . . . . . . . . . . . . 61

Ending/Holding calls by folding FOMA terminal<Closing action> . . . . . . . . . . 61

Using Received calls<Received calls> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Adjusting volume of the other party's voice during a call<Earpiece volume> 64

Enabling to talk in small voice<Whisper>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Blocking nuisance calls<Echo>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Using Dial memo<Dial memo>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Unable to answer calls/Missed calls

Putting calls On-hold when calls cannot be answered immediately

<On-hold> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Setting On-hold tone<On-hold tone> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Setting Call-on-hold tone<Call-on-hold tone> . . . . . . . . . . . . . . . . . . . . . . . . . .68

Setting not to receive calls during driving<Driving mode> . . . . . . . . . . . . . . .69

Confirming Missed calls<Missed calls> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Recording voice/video messages when calls cannot be answered

<Record message> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Playing/Deleting Record message/VoiceMemo-Call . . . . . . . . . . . . . . . . . . . . .74

49

Making calls

Making Calls

The common procedure to make voice-calls/video-phone is described below.

Enter a phone number from the area code on Stand-by display.

1

Making/Receiving calls

• Include the area code even when calling from the same city.

• 3 to 80 digits can be entered.

• Press c to correct the phone number.

• To re-enter the phone number from the top, hold down c for over

a second or return to Stand-by display by pressing f.

XXXXXXXX

Ｒｅｇｉｓｔｅｒ

Ｓｅｌｅｃｔ

Ｆｕｎｃｔｉｏｎ

Press n.

2

Ｄｉａｌｉｎｇ

XXXXXXXX

Press f after a call is finished.

3

INFORMATION

• The order of Step 2  Step 1 also enable to make calls in this case, A voice-call is made automatically in about

five seconds after you have pressed n and entered the phone number.

• A call can be ended by folding FOMA terminal during a call, when Closing action setting is "Disconnect". P61

• You may not be able to make a call while executing other functions. P518

• You cannot make calls by pressing the keypads when Keypad dial lock is ON.

• You can make the other party's voice hear from the speaker by holding down n for over a second during

voice-call.

• Do not cover built-in antenna while dialing/calling. P25

• When different screen is displayed during a call, press c to return to Calling screen.

Calling on the fixed-line phone: Area code-prefix-number

Calling on mobile phone : 090-XXXX-XXXX/080-XXXX-XXXX

Calling on PHS : 070- XXXX-XXXX

Sounds a signal tone and makes a call.

• The busy tone is heard, while the other party is busy. Press f to end

the call and try to call later.

• Press C s Press 1 "Dial phone call" also enable to make calls.

• If the guidance message requires the CallerID notification, try to call

later after setting the CallerID. P47, 54

• If the other party's mobile phone or PHS is turned off or is in area

where radio waves are hard to reach, a guidance message informs
that the connection cannot be made.

50

Functions available after entering phone number

You can make calls with various functions or can register in Phonebook after phone number is entered on
Stand-by display.

Enter the phone number from the area code on Stand-by display.

1

Select a function.

2

• Following operations can be operated with entering phone numbers during calls.

 Setting whether to notify your phone number to the other party

a Press p [Function] s Press 1 "Caller ID".
b Press 1 "Notify no callerID" or 2 "Notify callerID".

• Press 3 "Delete callerID" to release the setting.

 Making calls with IDD prefix

a Press p [Function] s Press 2 "Add number".
b Press one of 1 to 3.

Prefix : Select the Prefix code registered in the Prefix list and press C.

Int’l access code : Adds the prefix code registered as IDD prefix.

Multinumber : Multinumber P441

 Quoting phone numbers registered in Phonebook

Available after entering the numbers during a call. (Delete unnecessary numbers after quoting.)

a Press p [Function] s Press 3 "Quote phonebook".
b Select a Phonebook and press C.

• Searching Phonebook: P98

c Select a phone number and press C.

 Quoting phone number from Redial/Received calls

Available after entering the numbers during a call. (Delete unnecessary numbers after quoting.)

a Press p [Function] s Press 4 "Quote history".
b Press one of 1 to 4.
c Select a phone number and press C.
d Press C.

 Registering a new entry in Phonebook

Press m [Register] s Press 1 "New to phonebook".

• Following operations: P89 "Registering entries in FOMA terminal phonebook" Step 2 to 6, P94

"Registering entries into UIM (FOMA card) Phonebook" Step 2 to 4

 Registering an additional phone number in Phonebook

a Press m [Register] s Press 2 "Add to phonebook".
b Select a phonebook and press .C

• Following operations: P101 "Editing saved Phonebook entries " Step 3 to 5

Making/Receiving calls

51

Holding a voice-call during a call <Call-on-hold>

You can hold calls.

Press C during a call.

1

Ｈｏｌｄｉｎｇ

A call is made to be on hold and the holding tone is heard.

• Press C or n again to release on-hold.

Making/Receiving calls

    ＸＸＸＸＸＸＸＸ

INFORMATION

• Requires the call cost to the caller while a call is on hold.

• A call can be on hold by folding FOMA terminal during the call, when Closing action is set to "Hold".

• The melody played while on hold can be changed. P68

Redial

Calling back previously dialed numbers

You can save previously dialed numbers as Redial and can make calls from Redial.

•

Up to 30 calls can be saved. (The oldest call is deleted exceeding 30 calls.)

• In case the same number is in the 30 calls, only the latest call is saved.

Press R.

1

Ｒｅｃｅｉｖｅｄ ｃａｌｌｓ

０１ １３：３２ １２／２４
  ０９０ＸＸＸＸＸＸＸＸ

０２ １３：００ １２／２０
  Ｓａｎｙｏ Ｔａｒｏ
０３ ２０：１５ １２／１８
  ０３ＸＸＸＸＸＸＸＸ
０４ ２０：００ １２／１７
  Ｓａｎｙｏ Ｈａｎａｋｏ

ＡｄｒｓＨｉｓｔ

Redial list screen

Ｒｅｄｉａｌ

Ｄｅｔａｉｌ

Ｆｕｎｃｔｉｏｎ

Redial list screen is displayed.

• Displays the other party’s phone number, date and time of dialing.

• Displays the name when the other party’s phone number matches the

phone number registered in Phonebook.

 Not displaying the images registered in Phonebook

Press p [Function] s Press 6 "Photo display OFF".

• Press 6 "Photo display ON" to display.

52

Select the number to call back and press C.

2

Ｒｅｄｉａｌ    
０１ １３：３２ １２／２４

  １／４

Redial detailed screen is displayed.

 Not displaying the images registered in Phonebook as background

Press p [Function] s Press 6 "Transp display OFF".

• Press 6 "Transp display ON" to display.

XXXXXXXX

Ｓｅａｒｃｈ Ｓｅｌｅｃｔ

Redial detailed screen

Ｆｕｎｃｔｉｏｎ

 Icons displayed on Redial

Icon Description Icon Description

Dial voice-calls Dial international calls

Dial video-phone calls

Press n.

3

• Press t to make video-phone calls.

• Press C to use various functions. P205

Sending i-mode mails from Redial

• If both a phone number and an E-mail address are registered in Phonebook, the E-mail address is

specified as destination. In case the E-mail address is not registered, the phone number is specified as
destination.

a Press R.
b Select the other party to send a mail and press p [Function].
c Press 1 "Compose message".

Following operations: P230 "Composing and sending i-mode mails" Step 4 to 6

INFORMATION

• Press p [Function] s Press 1 "Compose message" enable to compose a mail from Redial detail screen.

• Redial is not deleted even if the power is turned off.

• Press L on Redial list screen to display the Received calls list.

• If PIM lock or Keypad dial lock is set, redials up to that point are all deleted. A redial is registered as the first

item after changing the setting.

• If the other party’s phone number is registered in several phonebook, the priority is set as follows.

a The phonebook in which the phone number is registered as Normal use.
b The Reading of the name in order of the Japanese syllabary.
c In order of Phonebook no.

• When redial is set as secret phonebook data, only the phone number is displayed and the name is not.

• When the View dialed/received is "OFF", the redial list is not displayed.

Deleting Redial

Press R.

1

Select a redial on Redial list screen and press p [Function] s

2

Press 2 "Delete".
Press 1 "Delete".

3

 Deleting by option

a Press 2 "Delete option".
b Select a redial and press .C

• Press C to release.

• Press m [Detail] to display the detail of Redial. Press m [List] to return to the list.

c Press p [Exec.].

Making/Receiving calls

See next page

53

 Deleting all

a Press 3 "Delete all".
b Enter the terminal security code and press C.

Press 1 "Yes".

4

• Press 2 "No" not to delete.

INFORMATION

• Select items on Redial screen and press p [Function] s Press 2 "Delete" to delete.

Making/Receiving calls

Setting whether to notify your phone number for each call

You can set to notify your phone number on the other party's phone each time you make a
call.

•

CallerID is your important information. Be careful to include your CallerID information in making a call.

Dialing with "186" or "184" added

Add "186" before the phone number to notify your CallerID, and add "184" not to notify.

 Sending your CallerID to notify

Press 186 c The other party's phone number cn (t in video-phone).

 Not sending your CallerID

Press 184 c The other party's phone number cn (t in video-phone).

INFORMATION

• CallerID notification can also be set in following operations.

- Setting CallerID notification from Functions for each call

- Setting CallerID notification from NW service menu collectively

- Setting the phone numbers in Phonebook

• The CallerID is displayed only when the other party's digital mobile phone can display IDs.

• CallerID may not be able to be displayed with a code "186" added before the phone number depending on the

telecommunication companies overseas.

• If the guidance message requires the CallerID notification, try to call later after setting the CallerID notification.

• When a call is made with "186" or "184" added, "186" or "184" is recorded in Redial.

• "e31f" can be used instead of "186", "f31f" instead of "184" can also be used.

P89

P51

P47

Pause

Sending push tone quickly

Sending push tone enable to send messages to pagers*, to operate the answering system at
home, and to reserve tickets, etc.

•

The dial digits can be separated at the point entering pause (P) and a touch-tone (DTMF) signal can be
sent.

54

Enter a phone number on Stand-by display, and hold down # for over

1

a second at the point to put pause (P) in.

"P" is entered.

• Pause cannot be entered at the beginning or entered continuously.

XXXXXXXX

Enter the rest of the numbers and press n.

2

Press C when a call is connected.

3

Numbers after "P" are sent with push signal.

INFORMATION

• The push tone may not be received depending on the device of the other party.

WORLD CALL/Prefix

Using international calls

"WORLD CALL" is an international call service available for DoCoMo mobile phone
subscriber.

•

"WORLD CALL" is already subscribed by all of the customers subscribing FOMA service (unless you
request not to subscribe).

• Neither application fee nor monthly fee is required.

• Some price plans cannot be applied.

• You can call to the parties in approximately 220 countries and regions around the world.

• "WORLD CALL" fee is charged as the monthly bills for FOMA services.

• Changes of the procedure to make international calls

"MY LINE" service is not applicable to mobile telephone communications, including WORLD CALL
service. Along with the introducing of MY LINE service, the dialing procedure for international
communications using a mobile phone has been changed. Note that the previous dialing procedure
(excluding prefix "010" from the procedure described below) no longer be used.

• Contact "DoCoMo Information Center" on the back of this manual for details.

- To use international call company services other than DoCoMo, contact the telecommunication
company for details.

Making/Receiving calls

Dialing the phone number and making an international call

Enter 009130 - 010 - Country code - Area code - phone number.

1

• Omit "0" in an area code starting with 0, and dial the number. (However, "0" may be needed in

calling some countries and areas, such as Italy.)

Press n.

2

• Press f to disconnect the call.

* Pocket Bell service was renamed to "QUICK CA ST" from January, 2001.

See next page

55

• "International video-phone" calls to the parties using specific oversea 3G mobile phone terminals can be

made by pressing t after the number described above.

- Visit the DoCoMo homepage for more information about the connectable areas and
telecommunication companies.

- The image of the other party displayed on FOMA terminal may be distorted or connection may
not be established depending on the terminal at the other end of the international video-phone
line.

Making/Receiving calls

Making international calls easily <Auto assist>

Default ON

When Auto assist setting is "ON", "c" is converted into "009130010" prefix code for international
calls and international calls can be made.

• However, when dialing with the Japanese country code "81" after "c", "009130010" is not converted

even under Auto assist setting "ON".

Press Cs Press s Press 4 s Press R s Press 3 s Press

1

1.
Press 1 "ON".

2

• Press 2 "OFF" not to set.

Making international calls with using Auto assist

Hold down ( for over a second on Stand-by display.

1

"c" is entered.

Enter the country code - area code - phone number.

2

Press n.

3

Confirmation screen of the number to dial is displayed.

Press 1 "Dial w/auto assist".

4

• Press 2 "Dial w/o auto asst" not to add automatically and 3 "Cancel" not to dial.

Setting other numbers than WORLD CALL < IDD prefix>

Default Title: WORLD CALL Prefix: 009130010

• The default Prefix is "009130010" for international calls.

• Only 1 prefix code can be registered as an IDD prefix setting.

Press C s Press s Press 4 s Press R s Press 3 s

1

Press 2.

56

Press 1 "WORLD CALL".

2

IDD prefix setting detail screen is displayed.

 Returning the number back to default Prefix code

a Press m [Reset].
b Press 1 "Yes".

• Press 2 "No" to cancel.

Press 1 "Prefix name", enter a name, and press C.

3

• Up to 10 two-byte (Full Mark) or 21 one-byte (Half Mark) characters can be entered.

Press 2 "Prefix code", enter a number, and press C.

4

• Up to 10 digits can be entered.

Press p [Register].

5

Setting Prefix

Can register Prefix code other than IDD prefix and use in making calls.

• Up to 5 Prefixes can be registered.

Press C s Press s Press 4s Press 6.

1

Select [Unregistered] and press C.

2

• Select already registered Prefix to delete and press C to edit Prefix.

• Press p [Detail] to confirm registered contents.

Enter registered name and press C.

3

• Up to 9 two-byte (Full Mark) or 18 one-byte (Half Mark) characters can be entered.

Enter Prefix code and press C.

4

• Up to 10 digits can be entered.

Press p [Register].

5

 Deleting Prefix setting

a Select a Prefix to delete on Prefix list screen and press m [Delete].
b Press 1 "Delete".

• When you press 2 "Delete all", enter the terminal security code and press C.

c Press 1 "Yes".

• Press 2 "No" not to delete.

 Making calls with using Prefix

a Enter a phone number on Stand-by display and press p [Function] s Press 2 s

Press 1 "Prefix".

b Select a Prefix and press C.

• Prefix is added on the top of the number. Press n (t in video-phone) to make calls.

Making/Receiving calls

57

Sub-address

Making calls with specifying sub-address

The numbers after "e" can be set as Sub-address.
Can set Sub-address to call specific phones or communication devices.

•

Can be used when received on specified communication devices on ISDN line or when selecting the
contents on "V-Live" movie distribution service.

Making/Receiving calls

Press C s Press s Press 4 s Press 7.

1

Press 1 "ON".

2

• Press 2 "OFF" not to set.

Making calls with specifying Sub-address

Enter a phone number from the area code on Stand-by display.

1

Press * and enter "e" and Sub-address.

2

Press n.

3

• Press t in making video-phone calls.

INFORMATION

• Even if Sub-address is set to "ON", numbers cannot be recognized as Sub-address with entering "e" before

the phone number or having "e" in the number added in prefix. Also same in entering "e" after Pause.

Reconnect control

Setting Alarm tone activating in reconnecting interrupted calls

Default ON

Default High alarm

Voice-calls/Video-phone may be interrupted by poor radio wave condition. Can be
reconnected in the area of good radio wave condition. You can set the Alarm tone sounding
at that time.

Press Cs Press s Press 4 s Press 3 s Press 2.

1

Press 1 "High alarm" or 2 "Low alarm".

2

• Press 3 "OFF" not to set.

INFORMATION

• The time required to make a reconnection depends on using condition or radio wave condition. Approximately

10 seconds are maximum. (Requires call cost at the time)

• The voice is not heard on the other party side when the call is interrupted.

• The call may be cut off before the alarm tone sounds depending on using condition or radio wave condition.

58

Noise reduction

Suppressing ambient noise to make the voice clear

Default ON

This setting can suppress the ambient noise and makes the voice clearer from the speaker
to be heard by the other party.

Press Cs Press s Press 4 s Press 3 s Press 3.

1

Press 1 "ON".

2

• Press 2 "OFF" not to set.

In-car hands free

Using Hands free compatible devices

You can make operations such as dialing/receiving of voice-calls with Hands free devices, by
connecting FOMA terminal to Hands free devices such as In-car hands free kit 01 (optional)
or car navigation system etc.

•

Refer to the operation manuals for operations of the hands free compatible devices. When you use In­car hands free kit 01 (optional), FOMA In-car hands free connection cable 01 (optional) is required.

INFORMATION

• When you operate FOMA terminal through Hands free compatible devices, execute the operation with FOMA

terminal in Stand-by display.

• Set USB mode to "Communication mode" when operating from the hands free compatible devices. P446

• Arrival act in receiving calls, such as display or Ring tone etc., follows the setting of FOMA terminals.

• Hands free compatible devices sound the Ring tone as preset to ring, even if Manner mode is set or Ring

volume is set to "OFF".

• Arrival act under Driving mode follows the setting of Driving mode.

• Arrival act of Record message follows the setting of Record message.

• Folding FOMA terminals under Closing action setting ends a call, if FOMA terminal is set to sound Ring tone.

If a hands free compatible device is set to sound a Ring tone, the call continues even with the FOMA terminal

folded, regardless of Closing action.

Making/Receiving calls

Receiving Calls

Receiving calls

The common procedure to make voice-calls/video-phone calls is described below.

Press C or n in receiving a call.

1

 Ｒｅｃｅｉｖｉｎｇ

Ｓａｎｙｏ Ｈａｎａｋｏ

XXXXXXXX

Press f after a call is finished.

2

Ring tone sounds and Incoming call lamp is blinked.

• A call can be received by pressing any other keys when Any key

answer setting is "ON". P61

See next page

59

INFORMATION

• A call can be switched to hands free call by holding down n for over a second during the call.

• A call can also be disconnected by folding FOMA terminal. Set Closing action setting "Hold" not to disconnect

the call by folding FOMA terminal.

P61

• Following information is displayed on the screen depending on the conditions of the other party and the setting

of FOMA terminal.

- The other party's phone number is displayed if the number is not registered in Phonebook.

- The other party's phone number, name, and still image/movie image (if registered in phonebook) are

Making/Receiving calls

displayed if the data is registered in Phonebook.

- The reason for hiding CallerID is displayed when the other party's phone number is not notified.

- A name is not displayed under Secret mode "ON", even if the data is registered in Phonebook.

• Arrival acts are not operated under Driving mode. (Registered as Received calls.)

Operations during receiving calls

Following operations are available by pressing p [Function] during receiving a call.

Call rejection : Disconnects calls.
Call forwarding : Forwards incoming calls to registered forwarding destination. P436
Voice mail : Forwards incoming calls to the Voice mail service center. P433
Record message : Records the message of the incoming call in FOMA terminal.

When you hear signal tone (Call waiting ring tone) while talking

With the subscription of following services, the signal tone is heard when another call is received during a
call and then the call is forwarded or responded automatically.

• Call waiting ring tone is not heard unless Set arrival act is set to "Activate service" and Arrival act is set

to "Answer".　P441

Voice mail service* : Forwards calls to Voice mail service center. P433
Call waiting service : Holds the current call and answer a new incoming call. P435
Call forwarding service* : Forwards calls to the registered forwarding destination.P436

*Press p [Function] to start act while Call waiting tone is heard.

P141

P138

When FOMA terminal is folded

Displays "Receiving" on Backside-display with Ring tone sounding and with Incoming-call lamp blinking in
receiving calls.

• The phone number and the registered name in Phonebook etc. are displayed. (when Backside notice

set to "ON")

• The reason for hiding CallerID is displayed when the phone number is not notified.

INFORMATION

• Calls from the party not registered in Phonebook can be rejected. Also can set to mute Ring tone for the preset

duration until starting to ring.

P141, 142

• By setting Call rejection for some parties registered in Phonebook, calls from such parties can be rejected.

P140

60

Any key answer

Setting to answer calls by pressing any of keypad

Default ON

Sets to answer calls with pressing dial keys (0 to 9), cursor key (A), c, m, *,
#, or s other than n or C in receiving voice-calls.

Press C s Press s Press 4s Press 1.

1

Press 1 "ON".

2

• Press 2 "OFF" not to set.

INFORMATION

• The Any key answer function is valid only for voice-calls. However, invalid in receiving voice-calls during a call.

• The Any key answer function is valid for the operation from approximately 3 seconds after receiving calls.

Open to talk

Starting calls by opening FOMA terminal

Default OFF

Set to receive a call by opening folded FOMA terminal.

•

Substitutive image is displayed in receiving a video-phone call by Open to talk.

Press C s Press s Press 4 s Press 2 s Press 1.

1

Press 1 "ON".

2

• Press 2 "OFF" not to set.

Making/Receiving calls

Closing action

Ending/Holding calls by folding FOMA terminal

Default Sound/Video-phone: Disconnected

Can set to end or hold Voice-call/Video-phone call by folding FOMA terminal.

•

This function is not operated during 64K data communication or packet communication.

Press Cs Press s Press 4 s Press 2 s Press 2.

1

Press 1 "Phone call" or 2 "Video-phone call".

2

Select the action in folding and press C.

3

Disconnect : Disconnects a call by folding FOMA terminal.

Hold : Puts a call on hold by folding FOMA terminal.

Substitutive image :

(back in connection by opening FOMA terminal)

Puts calls on hold and sends Substitutive image instead of the self image. (only
in video-phone service)

See next page

61

INFORMATION

• A call can be continued with FOMA terminal folded despite of Close action setting when Flat-plug Earphone/

Microphone set with a switch (optional) connected.

Received calls

Using Received calls

The information of incoming calls, such as phone number etc., is saved as Received calls.

Making/Receiving calls

•

Up to 30 received calls are saved. (The oldest call exceeding 30 is to be deleted)

Press L.

1

Ｒｅｃｅｉｖｅｄ ｃａｌｌｓ

０１ １３：３２ １２／２４
  ０９０ＸＸＸＸＸＸＸＸ

０２ １３：００ １２／１９
  Ｕｓｅｒ ｕｎｓｅｔ ｓｅｔｔｉ
０３ ２０：１５ １２／１８
  Ｓａｎｙｏ Ｔａｒｏ
０４ ２０：００ １２／１６
  Ｓａｎｙｏ Ｈａｎａｋｏ

ＡｄｒｓＨｉｓｔ

Received call list

Select a received call to confirm and press C.

2

Ｒｅｃｅｉｖｅｄ ｃａｌｌｓ
０１ １３：３２ １２／２４

Ｓｅａｒｃｈ Ｓｅｌｅｃｔ

Received call detail

Ｒｅｄｉａｌ

Ｄｅｔａｉｌ

Ｆｕｎｃｔｉｏｎ

screen

１／４

XXXXXXXX

Ｆｕｎｃｔｉｏｎ

screen

Received call list screen is displayed.

• Displays the other party’s phone number, date and time of dialing.

• Displays the name when the other party’s phone number matches the

phone number registered in Phonebook.

• The reason not to notify CallerID is displayed when the phone number

is not displayed. P141

 Not displaying the image registered in Phonebook

Press p [Function] s Press 6 "Photo display OFF".

• Press 6 "Photo display ON" to display.

Received call list detail screen is displayed.
If missed call is selected, Ringing time is displayed on the screen.

 Not displaying the image registered in Phonebook as background

Press p [Function] s Press 6 "Transp display OFF".

• Press 6 "Transp display ON" to display.

62

 Icons displayed on Received calls

Icon Description Icon Description

Received voice-call Missed video-phone call (confirmed)

Missed voice-call Received 64K data communication

Missed voice call (confirmed) Missed 64K data communication

Received international call

Received video-phone New Recorded message

Missed video-phone

Press n.

3

• Press t to make video-phone calls.

• Press C to use various functions. P205

Missed 64K data communication (confirmed)

Sending i-mode mails from Received calls

• When both a phone number and an E-mail address are registered in Phonebook, the E-mail address is

specified as destination. In case an E-mail address is not registered, phone number is specified as
destination.

a Press L.
b Select a party to send a mail and press p [Function].
c Press 1 "Compose message".

Following operations: P230 "Composing and sending i-mode mails" Step 4 to 6

Types of Received calls

Missed calls and Calls without sound are displayed in Received calls.
Up to 30 rejected calls, besides received calls, are saved in FOMA terminal with Call rejection setting.
Operation to display is as follows.

a Press L s Press p [Function].
b Select the display method and press C.

View missed calls : Displays the list of missed calls only.

View calls w/o snd : Displays calls received within the time set in Set mute seconds.

View rejected call : Displays received calls from the other party set to Call rejection. (Enter the

INFORMATION

• Press p [Function] s Press 1 "Compose message" to compose Mails from the Received calls detail

screen.

• Received calls are not deleted even when the power is turned off.

• Received calls are not displayed when View dialed/received set to "OFF".

• The phone number other than Dial-in number may be displayed if the other party uses Dial-in method.

• If PIM lock or Keypad dial lock is set, Received calls up to that point are all deleted. A received call is registered

as the first item after the setting.

• If the other party’s phone number is registered in several phonebook, the priority is set as follows.

a The phonebook in which the phone number is registered as Normal use.
b The Reading of the name in order of the Japanese syllabary.
c In order of Phonebook no.

• Only phone number is displayed and name is not displayed in receiving calls from the party registered in

phonebook set Secret to ON.

terminal security code and press C to display.)

Deleting Received calls <Delete received calls>

Press L.

1

Select a received call from Received calls list screen and press p

2

[Function] s Press 2 "Delete".

Making/Receiving calls

Press 1 "Delete".

3

 Deleting by option

a Press 2 "Delete option".
b Select Received calls and press C.

• Press C to release.

• Press m [Detail] to display the detail of Received calls.

c Press p [Exec.].

See next page

63

 Deleting all

a Press 3 "Delete all".
b Enter the terminal security code and press C.

Press 1 "Yes".

4

• Press 2 "No" to cancel.

INFORMATION

• Press p [Function] s Press 2 "Delete" on Received calls detail screen also enable to delete.

• Rejected calls are not deleted even if all of the received calls deleted.

Making/Receiving calls

Earpiece volume

Adjusting volume of the other party's voice during a call

Default LEVEL3

You can adjust the voice of the other party that sounds from the FOMA terminal at 5 levels
between LEVEL 1 and LEVEL 5 during voice-calls/video-phone calls.

Press J during a call.

1

Earpiece volume adjusting screen is displayed.

Ｅａｒｐｉｅｃｅ ｖｏｌｕｍｅ

ＬＥＶＥＬ３

During a voice-call During a video-

phone call

Press U to raise volume and D to lower.

2

• Volume is to be adjusted continuously by holding down.

INFORMATION

• The volume level that is set during a call remains after your call is finished.

• Earpiece volume remains after turning off the power.

Adjusting in Standing-by

Press C s Press s Press 1 s Press 1 s Press 1.

1

Earpiece volume adjusting screen is displayed.

Press U to raise volume and D to decrease.

2

• Volume is to be adjusted continuously by holding down.

Press C.

3

64

Whisper

Enabling to talk in small voice

Regular volume can be heard on the other party even by speaking in small voice.

Press p [Function] during a call.

1

Press 2 "Whisper".

2

"Whisper" is displayed on the screen during a call.

 Releasing Whisper

Press m [Release].

INFORMATION

• Whisper cannot be set during manner mode or connecting to hands free compatible devices.

Unable to answer calls/Missed calls

Echo

Blocking nuisance calls

You can block nuisance calls and send the other party's voice back to the other party.

•

The other party cannot hear your voice.

Press p [Function] during a call.

1

Press 3 "Echo".

2

"Echo" is displayed on the screen during a call.

 Releasing Echo

Press m [Release].

INFORMATION

• Echo function is available only for incoming calls. (Cannot be used in making calls.)

Making/Receiving calls

Dial memo

Using Dial memo

Notes, such as phone number etc., can be made in FOMA terminal during calls. Also, you can
refer to Dial memo anytime or a call can be made from Dial memo.

•

Up to 5 Dial memos can be registered. (The oldest call is deleted exceeding 5 calls.)

• 26 digits can be registered for 1 Dial memo.

• Dial memo is not deleted even when the power is turned off.

Registering a Dial memo

Enter the number to note during a call.

1

• Press c when entering a wrong number.

Press m [Register] s Press 3 "Register dial memo".

2

65

Using Dial memo

Press Cs Press s Press 7.

1

Ｄｉａｌ ｍｅｍｏ

０９０ＸＸＸＸＸＸＸＸ

０１２０ＸＸＸＸＸＸＰ１２３４Ｐ

０７０ＸＸＸＸＸＸＸＸ
０６ＸＸＸＸＸＸＸＸ

Making/Receiving calls

Ｄｅｔａｉｌ

Ｆｕｎｃｔｉｏｎ

Dial memo List

screen

 Sending push tone during a call

• Displaying Dial memo during a call P396

Select a Dial memo and press p [Function] s Press 2 "Send push tone".

Select a Dial memo and press C.

2

Dial memo detail screen is displayed.

INFORMATION

• Press p [Function] s Press 1 "Delete" to delete from Dial memo detail screen.

• Press p [Function] s Press 2 "Send push tone" to send push tone from Dial memo detail screen.

• Press C on Dial memo detail screen to make a voice-call/video-phone call or to register Phonebook from

Menu.

P205

On-hold

 Making calls

Select a Dial memo and press n.

• Press t in video-phone calls.

 Deleting a Dial memo

a Select a Dial memo and press p [Function] s Press 1

"Delete".

b Press 1 "Delete".

• When you press 2 "Delete all", enter the terminal security code,

and press C.

c Press 1 "Yes".

• Press 2 "No" to cancel.

Putting calls On-hold when calls cannot be answered immediately

You can put incoming calls on-hold if you are not available to answer the call immediately.

•

Call cost is charged on the other party while a call is on-hold.

Press f when receiving calls.

1

Ｏｎ ｈｏｌｄ

    ＸＸＸＸＸＸＸ

Beep sound is heard and a call is on-hold.
The other party hears on-hold message.
On-hold image is sent to your FOMA terminal and
the other party in case a video-phone call is
received.

66

Voice-call on hold Video-phone

Press n when you are ready to answer.

2

• Press t to answer with self image in video-phone.

• Press n when video-phone is on-hold to answer with substitutive image.

On-hold

INFORMATION

• The guidance message for On-hold can be edited.

• On-hold tone is not heard when Manner mode or Ring tone volume is set to "OFF". On-hold tone is heard when

Ring tone volume is set to other than "OFF" in Original manner mode.

• Press any key other than n enable to release On-hold of voice-call, when Any key answer is "ON". P61

• Press f to disconnect calls on-hold. A call can be also disconnected when the other party disconnects during

on-hold.

• Press p [Function] to connect to Voice mail service center or to forward the call during a call, if you subscribe

Voice mail/Forwarding service. However, Voice mail service is not applicable to Video-phone.

On-hold tone

Setting On-hold tone

Default On-hold tone 1

Sets On-hold tone played for the other party on hold in voice-call/video-phone. You can also
record your own voice and set the recorded voice as On-hold tone.

•

On-hold tone can be recorded for up to 12 seconds.

Press C s Press s Press 1 s Press 2 s Press R s

1

Press 6.

Ｏｎーｈｏｌｄ ｔｏｎｅ

Ｏｎーｈｏｌｄ ｔｏｎｅ １

Ｏｎーｈｏｌｄ ｔｏｎｅ ２

Ｏｒｉｇｉｎａｌ １
Ｏｒｉｇｉｎａｌ ２

Making/Receiving calls

Ｐｌａｙ Ｓｅｔ

On-hold tone list

screen

Press one of 1 to 4.

2

On-hold tone 1 : "Tadaima denwa ni derukoto ga dekimasen. Sonomama omachini naruka

On-hold tone 2 : "Tadaima denwa ni derukoto ga dekimasen. Moushiwake arimasenga

Original 1, Original 2 : Recorded On-hold tone.

• Press m [Play] to confirm On-hold tone. Press C while playing to set.

• "Original 1" and "Original 2" can be recorded. Cannot be set as Answer message before recording.

shibaraku tattekara okakenaishi kudasai. (Can’t answer your call right
now. Hold on for a while or call later.)" (preinstalled On-hold tone in FOMA
terminal)

mamonaku demasunode yoroshikereba sonomama omachi kudasai.
(Can’t answer your call right now. Please wait until answering the call.)"
(preinstalled On-hold tone in FOMA terminal)

67

Recording On-hold tone

Select "Original 1" or "Original 2" on On-hold tone list screen.

1

Press p [Function] s Press 1 "Record".

2

Ｏｒｉｇｉｎａｌ １

０ ｓｅｃ

Making/Receiving calls

  Ｅ                 Ｆ

 Ｐｒｅｓｓ （Ｒｅｃ．）ｏｒ

ｔｏ ｓｔａｒｔ ｒｅｃｏｒｄｉｎｇ

Press C.

3

Starts recording. Start talking to the mouthpiece.

Press C.

4

Stops recording. Recording automatically stops if the maximum duration is run out.

is displayed on On-hold tone list screen when the recording is completed.

• Press m [Play] to confirm recorded On-hold tone.

 Deleting recorded On-hold tone

• Returns to default setting if preset "Original 1" or "Original 2" is deleted.

a Select "Original 1" or "Original 2" and press p [Function] s Press 2 "Delete".
b Press 1 "Yes".

• Press 2 "No" not to delete.

Call-on-hold tone

Setting Call-on-hold tone

Sets Call-on-hold tone played during Call-on-hold of Voice-call/Video-phone.

Press C s Press s Press 1 s Press 2 s Press R s

1

Press 7.

Default Call-on-hold tone 1

68

Press one of 1 to 4.

2

Call-on-hold tone 1 :"グリーンスリーヴス (Green sleeves)" (Preinstalled Call-on-hold tone in

Call-on-hold tone 2 :"愛の挨拶 (Sault d’amour)" (Preinstalled Call-on-hold tone in FOMA

Original 1, Original 2 : Recorded Call-on-hold tone.

• Press m [Play] to confirm Call-on-hold tone.

• "Original 1" and "Original 2" can be recorded as you like. Cannot be set before recording.

Operation to record/delete is the same as On-hold tone operation. P68

FOMA terminal)

terminal)

Driving mode

Setting not to receive calls during driving

Driving mode is an automatic answering service considering safety driving. With Driving
mode "ON", the guidance is played to the other party that you are driving and cannot answer
the call and the call is disconnected.

•

Driving mode can be set even if " 圏外 (Out of service area)" is displayed.

Setting Driving mode

Hold down * for over a second on Stand-by display.

1

After Driving mode is set, is displayed on Stand-by display.

• Receiving action cannot be made under Driving mode. Received calls

are saved as "Missed calls".

• The guidance is played to the other party for Driving mode and the call

is disconnected.

 Releasing Driving mode

Hold down * for over a second on Stand-by display.

Relations with each network service under Driving mode

Each network service operates as follows in Driving mode.

Service In receiving voice-calls In receiving video-phone calls

Plays the guidance for Driving mode to

Voice mail service

Call waiting service

Call forwarding service

Nuisance call barring

service

CallerID request service

*1The guidance for Driving mode is not played if Ringing time until connecting to the service is 0 second.
*2Applicable only to video-phone devices which is compatible with 3G-324M (audio/visual transmission network

connected through the 3rd generation mobile communications).

the other party and connects to the

Voice mail service.

Plays the guidance of Driving mode and

ends calls.

Plays the guidance for Driving mode

and connects to the Call forwarding

1

service.

*

In case a call is made by the party

registered as Call rejection, Call

rejection guidance instead of the

guidance for Driving mode is played

and a call is disconnected.

Plays the guidance to request CallerID

to the other party not notifying CallerID

and the call is disconnected. And plays

the guidance for Driving mode to the

other party notifying CallerID and the

call is disconnected.

*1

The message informs the other party

that the connection is not succeeded

and the connection is failed.

In Voice-call, displays the message that

your FOMA terminal is in Driving mode

and disconnects calls. In Video-phone,

displays the message that your FOMA

terminal is on the phone call and

disconnects calls.

No guidance is played and a call is

connected to the forwarded destination

immediately.

The message informs the other party

that the connection is not succeeded

and the connection is failed.

The message informs the other party

notifying callerID of that the receiver is

under Driving mode and the connection

is failed.

*2

Making/Receiving calls

See next page

69

INFORMATION

• Driving mode setting is prior to Manner mode setting.

• Does not sound every Ring tone (Voice-call/Video-phone/Mails including MessageR/F), Alarm, or Confirmation

tone under Driving mode. Also, neither Backside-display nor Incoming-call lamp is lit.

• Can make a call under Driving mode.

• The guidance for " 圏外 (Out of service area)" instead of Driving mode is played to the other party when FOMA

terminal is turned off or "圏外 (Out of service area)" is displayed.

• Driving mode cannot be set during data transmission.

Making/Receiving calls

Missed calls

Confirming Missed calls

• Only Missed calls out of received calls are displayed on View missed calls.

Confirming on Stand-by display

If calls are missed, and "New notice found" are displayed. Press D to
display the number of missed calls.
Press C to display Missed calls, when the number of Missed calls is
displayed.

• Press D to confirm when only the notify icon is displayed.

Ｍｉｓｓｅｄ ｃａｌｌｓ         １

Displaying Missed calls

Press S.

1

Redial list screen or Received calls list screen is displayed.

Press p [Function] s Press 3 "View missed calls".

2

Missed calls list screen is displayed.

• The operations on View missed calls are the same as Received calls operations. P62

Confirming with FOMA terminal folded

• To confirm Missed calls with FOMA terminal folded, make the Side key operation setting "Valid".

Press ) ( ボイス (Voice)) with FOMA terminal folded.

1

The number of items are displayed on Backside-display.

• Missed calls can be confirmed with voice when Voice notice is set to "Notices" or "Time and

notices".

INFORMATION

• Press p [Function] s Press 3 "View missed calls" to display missed calls on Redial detail screen or

Received calls detail screen.

• Missed calls can be confirmed with voice on Stand-by display even with FOMA terminal opened.

70

Record message

Recording voice/video messages when calls cannot be answered

Allows the other party to leave a voice/video message after answer message is played when
a call is missed. Video message can be recorded in video-phone.

•

Can record up to 4 messages and approximately 20 seconds for each message.

Record message and Voice mail service

The differences between Record message and Voice mail service are as follows.

Item Record Message Voice mail service

Number of recordable

items/duration

Retention period of

message

Place to retain

the message

Recordable place and

condition

Setting Record message <Set record message>

Press C s Press s Press 1.

1

Record message setting screen is displayed.

Press 1 "ON".

2

• Press 2 "OFF" to release.

Press p [Define].

3

Up to 4, approx. 20 secs for each Up to 20, 3 mins maximum

Unrestricted Up to 72 hrs

FOMA terminal Voice mail service center

Recordable when the party receiving

calls is in the service area and the

power is turned on.

Record message is set and is displayed on Stand-by display.

• Setting Answer time P72

• Setting Answer message P73

Recordable when the party receiving

calls is in or out of service area and the

power is turned on or off.

Default OFF

Making/Receiving calls

INFORMATION

• Recorded messages may be lost due to failure, repair, modifications, or other handlings of FOMA terminal. In

case the recorded data is erased, DoCoMo assumes no responsibility for the loss of any data. Recommends

to make notes of recorded messages for your record.

• Answer message and the other party's voice cannot be heard under Manner mode or with FOMA terminal

folded.

• If there are already 4 record messages, Voice memo cannot be set. Answer time or Answer message cannot

be set.

Setting Record message

Operations are as follows when a call is received under setting of Record message.

A call is received.

1

Answer message is played to the other party after preset Answer time is passed.

See next page

71

The other party's message is recorded.

2

Displays "Recording" and starts recording.

• Can hear the other party's voice from the earpiece of the FOMA terminal during recording. Once

recording starts, counted as 1 recorded item despite of recorded duration.

• Records video and sound in Video-phone.

Ｒｅｃｏｒｄ ｍｅｓｓａｇｅ

       Ｒｅｃｏｒｄｉｎｇ

１０ ｓｅｃ

  Ｅ                 Ｆ

Making/Receiving calls

１０ ｓｅｃ ｒｅｍａｉｎｉｎｇ

    Ｏｎ ｈｏｌｄ

Ｒｅｃｏｒｄｉｎｇ

    １０ ｓｅｃ

In Voice-call

When the recording is completed, the call is disconnected.

3

  Ｎｅｗ ｎｏｔｉｃｅ ｆｏｕｎｄ

INFORMATION

• Select a Notify icon and press C to display Record message list screen.

• An incoming call can be answered in playing Answer message or recording voice/video message. Press n

to operate normal Voice-call/Video-phone (sending substitutive image to the other party) and press

operate Video-phone with sending self image. If recording a message at this time, the message recorded up

to the point when a call is answered cannot be recorded.

• Record message function cannot be operated with 4 messages already recorded. In that case, Ring tone

keeps playing. Voice mail service and Call forwarding service functions are operated according to the setting.

• Record message function is not available under Driving mode.

• Incoming calls are rejected while the message is recorded, and the recording is continued. Rejected calls are

saved in Received calls.

In Video-phone

(The number means the items of unread messages) and Notify icon

are displayed on Stand-by display.

• After 4 messages are recorded, Icon color is changed into orange.

t to

Setting duration before playing Answer message <Answer time>

Sets the duration from receiving a call to starting to play Answer message.

Press C s Press s Press 1 s Press 1 s Press 1.

1

Enter Answer time and press C.

2

0 to 120 seconds can be set as Answer time.

Press p [Define].

3

72

Default 8 sec

INFORMATION

• If Voice mail service and Call forwarding service are set simultaneously, Answer time of Record message is

required to be shorter than the duration of other services to set the priority of Record message.

• Record message is started during Mute seconds, if the duration of Mute seconds is longer than Answer time

of Record message.

Setting Answer message <Answer message>

Default Standard

Set Answer message. You can record your own voice and set as Answer message.

• Up to 2 Answer messages and 12 seconds for each message can be recorded.

Press C s Press s Press 1 s Press 1 s Press 2.

1

Press one of 1 to 4.

2

Standard : "Tadaima denwa ni derukoto ga dekimasen. Pi- to iu hasshinon no ato ni

Drive : "Tadaima unten chu no tame denwa ni derukoto ga dekimasen.

Original 1, Original 2 : Recorded Answer message.

• Press m [Play] to confirm Answer message.

• "Original 1" and "Original 2" can be recorded as you like. Cannot be set before recording.

Operation to record/delete is the same as On-hold tone operation. P68

Press p [Define].

3

Setting Answer message image (only in Record message in video-phone)

Sets an image displayed while playing Answer message or recording video message.

20 byo inai de onamae renrakusaki nado wo ohanashikudasai. (Can’t
answer your call right now. Leave your name and phone number etc.
within 20 seconds after the beep.)" (preinstalled Answer message in
FOMA terminal)

Nochihodo okakenaoshi kudasai. (Can’t answer your call right now in
driving vehicle. Please call back.)" (Preinstalled Answer message in
FOMA terminal)

Making/Receiving calls

Press C s Press s Press 7 s Press 6 s Press .2

1

Press 1 "My picture".

2

• Press 2 "OFF" not to set.

Select a still image and press C.

3

INFORMATION

• Default image ("伝言メモ ( テレビ電話 ) (Record message (video-phone))") is displayed if no Video-phone

image is set as Answer message.

73

Playing/Deleting Record message/VoiceMemo-Call

You can play or delete Record message and VoiceMemo-Call.

Playing Record message/VoiceMemo-Call

Press C s Press .

1

Making/Receiving calls

Press 2 "Play record message" or 5 "Play VoiceMemo-Call".

2

Select a memo and press C.

3

Ｐｌａｙ ｒｅｃｏｒｄ ｍｅｓｓａｇｅ １／１
        Ｐｌａｙｉｎｇ

  １５：１５ １２／２４

Ｓａｎｙｏ Ｈａｎａｋｏ

XXXXXXXX

In case of Record

message

Deleting Record message/VoiceMemo-Call

Press C s Press .

1

Press 2 "Play record message" or 5 "Play VoiceMemo-Call".

2

Select a memo and press p [Function] s Press R s Press 1

3

"Delete".

The memo is played.

• Press J during playing to adjust volume.

• Press C to stop.

Press 1 "Delete".

4

• When you press 2 "Delete all", enter the terminal security code and press C.

Press 1 "Yes".

5

• Press 2 "No" to cancel.

INFORMATION

• Press p [Function] s Press R s Press 1 "Delete" to delete Record message or VoiceMemo-Call during

playing.

• Select a Record message and press p [Function] to make Voice-calls/Video-phone calls or to register phone

number in Phonebook.

• Cannot be played immediately after disconnecting a call. Wait until Stand-by display returns.

• Video-phone record message is played from the speaker.

74

Making/Receiving Video-phone calls

Video-phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Making Video-phone calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Receiving Video-phone calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Using Chara-den . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Setting an image to send to the other party . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Customizing display settings for Video-phone call. . . . . . . . . . . . . . . . . . . . . .84

Changing Video-phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

75

Video-phone

Video-phone function is available between terminals that support DoCoMo Video-phone.

You can send or receive Still image, Substitutive image, and Chara-den etc. besides your self
image.

DoCoMo Video-phone specifications are conforming to "3G-324M*1, an international standard prepared
by 3GPP*2". Note that the connection with the video-phones of different specifications can not be
established.

• The following two connection speeds are provided for Video-phone:

Making/Receiving Video-phone calls

- 64K: Connects at 64kbps connection speed.

- 32K: Connects at 32kbps connection speed. *

*1 3G-324M

An international standard for the 3rd generation mobile video-phone.

*2 3GPP (3rd Generation Partnership Project)

Area standardization organization established to develop the standard technology specification for 3rd
generation mobile communications systems (IMT-2000).

*3 32k Video-phone cannot be operated with FOMA terminal SA700iS.

Reading Video-phone screen

a

3

defg

hijkl

a Main screen

b Sub screen

c Call duration

d Hands free

The other party's camera image
is displayed (by default).

Your camera image is displayed
(by default).

Displays the duration of a call.

Under Hands free mode

e Send DTMF Send DTMF

e Chara-den

action

Body action
Body parts action

f White balance Auto, Fine weather,

Cloudy weather,
Fluorescent(neut. white),

Fluorescent(daylight)

76

c

Lamp light,

b

g Light Light is turned on

Cannot use Light

h

Sent image type

i

Sound/Video

j Special effect

k Sending image

quality

l Brightness

Self image, Chara-den,
Substitutive image (except Chara-den ),
During on-hold,
During call-on-hold,
During recording Record message,
During recording VoiceMemo-call
During playing files

Video c Sound,

Only Video,

Sepia, Monochrome,
4 colors (Red etc.),
Emboss, Negative image

Standard,
Prefer motion speed,
Prefer image quality

Adjusts brightness among to

to

,

Only sound

Making Video-phone calls

• International video-phone calls are available using DoCoMo international call service "WORLD

CALL".

Enter a phone number from the area code on Stand-by display.

1

XXXXXXXX

Ｒｅｇｉｓｔｅｒ

Ｓｅｌｅｃｔ

Ｆｕｎｃｔｉｏｎ

 Selecting outgoing image in making video-phone calls

a Press p [Function] s Press 5 "Video-phone image".
b Press 1 "Me" or 2 "Chara-den".

Press t.

2

Signal tone is heard and a call is connected.

• The busy tone is heard and "Busy" is displayed, while the other party is talking.

Press f to end the call and try to call later.

• Press C s Press 2 "Dial 64K v-phone" also enable to make calls.

• Call cost starts to be charged from when "Connecting v-phone" is displayed on the screen.

Press n after Video-phone is connected to talk with your hands free.

3

Ｈｏｌｄ

Ｃａｍ Ｓｗ

Press f after a call is finished.

4

Ｆｕｎｃｔｉｏｎ

• Include the area code even when calling from the same city.

• 3 to 80 digits can be entered.

• Press c to correct the phone number.

• To reenter the phone number from the top, hold down c for over

a second or press f to return Stand-by display.

Calling a fixed-line phone : Area code-prefix-number

Calling a mobile phone : 090-XXXX-XXXX/080-XXXX-XXXX

Calling a PHS : 070- XXXX-XXXX

The other party's camera image and is displayed.

• Flat plug Earphone/Microphone set with a switch (optional) can be

connected, if Hands free is not set.

• The substitutive image, etc. is displayed due to the setting of the other

party.

 Switching Substitutive image and camera image

Press t.

 Switching In-camera and Out-camera

Press m [Cam Sw].

 Displaying images in Data box

• Images smaller than QCIF image size can be displayed.

a Press p [Function] s Press 6 "Play file" during a video-

phone call.

b Select data and press C.

Making/Receiving Video-phone calls

77

Messages in case video-phone call is failed.

FOMA terminal displays the reasons of Video-phone failure as message.
Messages vary depending on the other party's terminal model or network services.

Message Description

Check the number and retry You have dialed the phone number not used.

Busy

Disconnected due to outside of service/power off

Driving mode The other party's terminal is under Driving mode.

Select ON for Caller ID notification Displayed when you call without CallerID notification.

Making/Receiving Video-phone calls

Failed to connect Displayed for other cases above.

The other party is on the other phone call, 64K data

communication or packet communication.

The other party is out of service area or turned off the power.

(When dialing to the services such as V-Live or Visual net etc.)

Putting a video-phone On-hold <Call-on-hold>

Press C during a video-phone call.

1

INFORMATION

• Communication fee is charged not as call cost but as digital communication fee even if substitute image or

Chara-den is used.

• Video-phone cannot be made to Emergency call number (110,119.118). However, FOMA terminal calls back

as Voice-call when Voice call auto switch is set to "ON". P86

•

A video-phone call cannot be made, in case of calling the terminal not supporting the Video-phone function, or the
terminal (even if compatible with video-phone function) turned off or located outside the service area. If you set the
Voice call auto switch function to "ON" and attempt to make a video-phone call with an unsupported device, the other
party will abort the communications before connected. For this case, redialing as Voice-call automatically. The
redialing function may not work as descried above if you attempt video-phone calls with inapplicable conditions such
as at ISDN-sync 64k or via PIAFS access points, with ISDN video-phones incompatible with 3G-324M (as of
September, 2005), or dial the wrong phone number. Note that the communication fee is required in some cases.

• 64k Video-phone is available in this FOMA terminal SA700iS. FOMA terminal SA700iS is not compatible with

32k video-phone. Video-phone call cannot be made with devices such as PHS etc. that 32k video-phone can
only be connected depending on the network environment. When Voice call auto switch is set to "ON", Video­phone is switched automatically to voice-call.

• The connection may be able to continue even if a communication of either voice or video is cut off during a

video-phone call and (voice only) or (image only) is displayed.

•

Depending on the radio wave condition during a video-phone call, Image may be displayed as mosaic.

• New voice-call/video-phone calls cannot be made during a video-phone call. Also, i-mode connection, i-mode

Mail, or MessageR/F is not available. However, SMS can be received during video-phone calls.

• Hands free function is available under Manner mode.

• Put FOMA terminal away from your ear when Hands free is set. Rapid increase of the volume may cause the

damage of your ear. FOMA terminal should be 20 to 40cm away from yourself.

Puts a video-phone on-hold.

 Releasing On-hold

Press t.

Restarts the call with Self image.
Press C.
Restarts the call with the image sent before holding.
Press n.
Releases On-hold and sends Substitutive image.

78

Receiving Video-phone calls

• Can display Substitutive image instead of camera image in receiving video-phone calls.

Press t in receiving a video-phone call.

1

 Ｒｅｃｅｉｖｉｎｇ ｖｉｄｅｏ−ｐｈｏｎｅ

Ｓａｎｙｏ Ｈａｎａｋｏ

XXXXXXXX

Press n to talk with your hands free.

2

Ｈｏｌｄ

Ｃａｍ Ｓｗ

Press f after a call is finished.

3

Operations while receiving calls

Press p [Function] for following operations during video-phone calls.

Call rejection : A call is rejected and then disconnected. The call is saved in Rejected calls.

Call forwarding : Forwards a call to registered forwarding destination. P436

Record message : Records voice/video of the other party.

Ｆｕｎｃｔｉｏｎ

The message "Receiving video-phone" and the phone number (or
reason for not notifying CallerID) etc. are displayed.

 Answering Video-phone with Substitutive image

Press C or n.

The substitute image instead of your self image is sent to the other party.

Image of the other party is displayed on the screen.

• Flat plug Earphone/Microphone set with a switch (optional) can be

connected, if Hands free is not set.

 Switching Substitutive image and camera image

Press t.

 Switching In-camera and Out-camera

Press m [Cam Sw].

Making/Receiving Video-phone calls

INFORMATION

• Press f to put a call on-hold when a video-phone call cannot be answered immediately.

• Video-phone calls cannot be connected to Voice mail service center and calls are disconnected after passing

Ringing time even if Voice mail service is set to activate.

• Incoming video-phone calls cannot be forwarded to the incompatible devices with the 3G-324M standard, even

if Call forwarding service is activated. Check the specifications of the destination devices when setting the

forwarding destination.

• If an incoming video-phone call shows a phone number registered in Nuisance call barring service, the call is

disconnected without the call rejection guidance.

• Arrival act, such as Ring tone or Vibrator etc., cannot be operated if the FOMA terminal receives 32K video-

phone call. Also 32K video-phone is not recorded in Received calls.

• If operating Video-phone call with the terminal which image size is set as Sub-QCIF, the image of the other

party is not displayed correctly.

79

Using Chara-den

During a video-phone, a character can be sent instead of the camera image. You can puppeteer
Characters with keypads. Some Chara-den can move their mouth reacting to the voice from
Mouthpiece.

• Available Chara-den: P352

Preinstalled Chara-den by default

• Chara-den can be downloaded. P204

Making/Receiving Video-phone calls

ブンブン（Dimo）

(Boon Boon (Dimo))

Setting Substitutive image <Send substitutive image>

• Camera image sending is required to be set to "OFF", when using selected Chara-den in making Video-

phone calls. P86

• Images smaller than QCIF image size can be set.

1
2

3

4

©BVIG

Press C s Press s Press 7 s Press 6 s Press 1.

Press 1 "My picture" or 2 "Chara-den".

• Press 3 "OFF" not to set.

Select an image or Chara-den and press C.

• Press m [Play] to confirm an image or Chara-den.

Enter a phone number from area code on Stand-by display and Press

ナオキ (Naoki)

ハルカ (Haruka)

Default ブンブン (Dimo) (Boon Boon (Dimo))

t.
Press t after Video-phone call is connected.

5

Sends Substitutive image.

80

Ｈｏｌｄ

ＡｃｔｉｏｎＬｉｓｔ

Display with

Chara-den

Ｆｕｎｃｔｉｏｎ

Switching Chara-den

Press p [Function] s Press 4 "Chara-den setting" during

1

sending Chara-den.
Press 1 "Sw to Chara-den".

2

Select Chara-den and press C.

3

Switching Chara-den action

Press S during sending Chara-den.

1

Switches Body action and Body parts action.

• Press p [Function] during sending Chara-den s Press 4 "Chara-den setting" s Press 3

"Change action" also enable to switch.

Operating Chara-den

Press Keypads during sending Chara-den.

1

 Confirming actions.

a Press p [Function] during sending Chara-den s Press 4 "Chara-den setting"
b Press 2 "Action list".

INFORMATION

• Chara-den cannot be operated when sending push tone (DTMF).

• In case Chara-den or a still image set as Substitutive image is deleted, substitutive image returns to the default.

(In case "

話)

ブンブン (Dimo) (Boon Boon (Dimo))" is deleted, Substitutive image is to set to " カメラオフ (テレビ電

(Camera-off (Video-phone))".)

.

Making/Receiving Video-phone calls

Setting an image to send to the other party

Set the image which is to be sent onto the other party during a video-phone call.

• When the other party's camera image is set to be displayed on Main screen, the image can be

confirmed on Sub screen.

Setting quality of outgoing image

Default Standard

Set the quality of an outgoing image.

Press p [Function] s Press R s Press 2 "Sending image qual"

1

during a video-phone call.

Sending image quality screen is displayed.

Press one of 1 to 3.

2

Normal : Sets as standard quality in both image/motion speed of the image.

Prefer motion spd

Prefer img quality

: Sets priority to motion speed quality over image quality.

: Sets priority to image quality over motion speed quality.

81

Applying special effects to outgoing images

Default No effect

Special effects can be applied onto outgoing images. The image with special effects is displayed on the other party's screen.

Press p [Function] s Press 7 s Press 1 "Special effect"

1

during a video-phone call.
Select a special effect and press C.

2

No effect : Makes an image with no special effect applied.

Making/Receiving Video-phone calls

Sepia : Makes a image tanned-yellowish like an old picture.

Monochrome : Makes an image in black and white.

Red : Makes an image red-tinged.

Green : Makes an image green-tinged.

Blue : Makes an image blue-tinged.

Purple : Makes an image purple-tinged.

Emboss : Makes an image with embossing effect.

Negative image : Makes an image like negative camera film.

INFORMATION

•

Only camera image can be processed with special effects. Substitutive image or Chara-den cannot be processed.

Adjusting White balance

Default Auto

Adjust White balance of outgoing images. White balance can be changed according to the light
environment of the location.

Press p [Function] s Press 7 s Press 2 "White balance"

1

during a video-phone call.
Press one of 1 to 6.

2

Auto : Adjusts White balance automatically.

Fine weather : Sets images adapted to fine weather lighting.

Cloudy weather : Sets images adapted to cloudy weather lighting.

Lamp light : Sets images adapted to the light condition under lamp light.

Fluor (neut. white) : Sets images adapted to fluorescent (neut. white) lighting.

Fluor (daylight) : Sets images adapted to fluorescent (daylight) lighting.

INFORMATION

• Only Video-phone camera image can be adjusted with White balance setting. White balance cannot be

adjusted in displaying Substitutive image or Chara-den.

82

Adjusting Brightness

Default Brightness:±0 Light:OFF

Sets brightness of the outgoing image displayed on the other party's screen.

• 11 volume levels, among -5 to ±0 to 5, can be set.

Press ( or ) during a video-phone call.

1

INFORMATION

• Only Video-phone camera image can be adjusted with brightness setting. Brightness cannot be

adjusted in displaying Substitutive image or Chara-den.

Turning light on

You can make an outgoing image brighter with the light turned on in using Out-camera.

Press p [Function] s Press 7 s Press 3 "Light" during a

1

The value of is changed.

• A screen becomes brighter by pressing ( each time.

• Becomes darker by pressing ) each time.

video-phone call.
Press 1 "ON".

2

• Press 2 "OFF" to turn the light off.

Making/Receiving Video-phone calls

Switching display magnifications <Zoom>

Default Normal

Switch display magnifications of an outgoing image sent to the other party.

Press L or R during a video-phone call.

1

A screen becomes larger by pressing R each time.
A screen becomes smaller by pressing L each time. (Reduced screen
cannot be displayed.)

INFORMATION

• Switch In-camera/Out-camera to return to default zooming.

• Only camera image can be applicable with Zoom function. Cannot be adjusted during displaying Substitutive

image or Chara-den.

is displayed and magnifications is switched.

83

Sending push tone (DTMF)

Send push tone (DTMF) during a video-phone call.

Press keypads during a video-phone call.

1

The number is displayed and sent.

• Press p [Function] s Press R s Press 4 "Send DTMF tone" and keypads to use Chara-

den.

Changing an outgoing image sent during playing Answer message or during on hold <Video-phone image>

Making/Receiving Video-phone calls

You can change Video-phone record message image/On-hold image/Call-on-hold image.

• The image of Video-phone record message/On-hold/Call-on-hold can be displayed on FOMA terminal

when those images are displayed.

• Images smaller than QCIF image size can be set.

Press C s Press s Press 7 s Press 6.

1

Press one of 2 to 4.

2

Press 1 "My picture".

3

• Press 2 "OFF" not to set.

Select a still image and press C.

4

Default Record message image:

On-hold image: 応答保留( テレビ電話) (On-hold (Video-phone))
Call-on-hold image: 通話中保留 ( テレビ電話) (Call-on-hold (Video-phone))

伝言メモ(テレビ電話

) (Record message (Video-phone))

Customizing display settings for Video-phone call

Sets an image displayed during a video-phone call.

Setting quality of incoming image

Default Standard

Sets the quality of incoming images in video-phone calls.

Press p [Function] s Press R s Press 3 "Receiving img qual"

1

during a video-phone call.

84

Press one of 1 to 3.

2

Normal : Sets as standard quality in both image/motion speed of the image.

Prefer motion spd

Prefer img quality

: Sets priority to motion speed quality over image quality.

: Sets priority to image quality over motion speed quality.

Setting the image of Main/Sub screen.

Default Main screen: Other party Sub screen: Me (Self image) Display: Both

Set the display of Main/Sub screen.

Switching image of Main/Sub screen

Press p [Function] s Press 3 "Disp position chg" during a

1

video-phone call.

Your FOMA terminal camera image is displayed on Main screen, and the other party's camera
image is displayed on Sub screen.

• The image of Main/Sub screen is switched each time operating Step 1.

Setting the display of Mail/Sub screen

Press p [Function] s Press 1 "V-phone display" during a video-

1

phone call.
Press one of 1 to 3.

2

Both : The images are displayed on both of Main/Sub screen.

Other : Displays the only image of the other party.

Me : Displays the only self image of your side.

Changing Main screen size

Default Large view

Changes Main screen size. In case the image is too rough, return to Normal view size.

Making/Receiving Video-phone calls

Press p [Function] s Press 2 "Normal view" during a video-

1

phone call.

Main screen is changed into the normal view size.

• The image size can be switched between large and normal size each time operating Step 1.

Setting the lighting of display screen

Sets continuous lighting ON/OFF of the display during a video-phone call.

Press p [Function] s Press R s Press 1 "Display light" during

1

a video-phone call.
Press 1 "ON".

2

• Press 2 "OFF" not to set. Follows Display light setting if "OFF" is set.

Default ON

85

Changing Video-phone settings

Default Camera image sending: ON Voice call auto switch: OFF

Sets the operation in case video-phone call is not connected or sets the image displayed in video­phone calls.

• "Voice call auto switch" allows in Video-phone settings to ensure the access to the other party. Voice call

auto switch is the function to switch the call type to voice-call automatically and to redial, when the other
party’s terminal is not supporting the Video-phone function or not receiving video-phone call while using
the mova service through the Dual Network Service.

Making/Receiving Video-phone calls

Press C s Press s Press 7.

1

Select an item and press C.

2

Camera image sending : Sets sending image when making a video-phone call.

Voice call auto sw : Sets to call back in Voice-call automatically.

Video-phone display : Changes display during a video-phone call.

Display screen size : Changes display size of Main screen.

Sending image quality : Sets the quality of sending image.

Video-phone image : Changes the image sent to the other party. P80, P84

INFORMATION

• May not be able to redial depending on condition of the network or the other party etc., even if Voice call auto

switch is set to "ON".

• The voice-call cost fee is required, if redialing as voice-call under Voice call auto switch setting "ON".

• FOMA terminal SA700iS is not compatible with 32K video-phone. A call is switched into a voice-call under

Voice call auto switch "ON", in case the other party, such as PHS etc., restricts video-phone only to 32K video-

phone connection due to network environment.

Video-phone display: Both Display screen size: Large view Sending image quality: Normal

• Press 1 "ON" or 2 "OFF". In pressing "OFF",

set Substitutive image. Following operations: P80
"Setting Substitutive image <Send substitutive
image>" Step 2 to 3

• Press 1 "ON" or 2 "OFF".

• Press one of 1 to 3.

• Press 1 "Large view" or 2 "Normal view".

86

Phonebook

Phonebooks supported by FOMA terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Registering entries in FOMA terminal phonebook

<Register to phonebook> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Registering entries into UIM (FOMA card) Phonebook

<Register to UIM (FOMA card) Phonebook>. . . . . . . . . . . . . . . . . . . . . . . . . . 94

Registering to Phonebook from Redial or Received calls . . . . . . . . . . . . . . . .95

Editing Group<Edit Group> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Making calls using Phonebook<Search phonebook> . . . . . . . . . . . . . . . . . . . .98

Editing saved Phonebook entries<Edit Phonebook> . . . . . . . . . . . . . . . . . . . 101

Copying Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Deleting Phonebook entries<Delete Phonebook> . . . . . . . . . . . . . . . . . . . . . .103

Announcing Phonebook data with Voiced readout . . . . . . . . . . . . . . . . . . . . . 104

Protecting Phonebook data with Secret<Secret> . . . . . . . . . . . . . . . . . . . . . .104

Checking the number of registered Phonebook entries<Memory status> . . 105

Using simple dialing to make calls<Two-touch dial> . . . . . . . . . . . . . . . . . . .106

87

Phonebooks supported by FOMA terminal

You can use FOMA terminal phonebook and UIM (FOMA card) phonebook in your FOMA terminal.

•

UIM (FOMA card) phonebook can be used by inserting UIM (FOMA card) in other FOMA terminal.

Differences between FOMA terminal phonebook and UIM (FOMA card) phonebook.

Icons

Phonebook

Item FOMA terminal phonebook UIM (FOMA card) phonebook

Basic

The number of entries
(Phonebook number)

Name

Reading

Phone number

E-mail address

Group

Image

Location
information

Select Chara-den Chara-den in "Data BOX" can be selected. Cannot be set.

Secret attribute

Secret code

Individual phone
receive call

Individual video­phone receive

Individual receive
message

Individual message

Up to 500 items can be registered.
(000 to 499 as Phonebook number)

Up to 16 two-byte (Full Mark) or 32 one­byte (Half Mark) characters can be entered.

Up to 32 one-byte (Half Mark) characters
can be entered.

Up to 3 phone numbers can be registered
for each phonebook.
Up to 26 digits can be entered.
Icon of Phone type can be selected from 8 icons.

Up to 3 E-mail addresses can be registered
for each phonebook.
Up to 50 one-byte (Half Mark)
alphanumeric characters and marks can be
entered.
Icon of E-mail address type can be selected
from 5 icons.

Can be selected from 20 groups.
Up to 10 two-byte (Full Mark) or 21 one­byte (Half Mark) characters can be entered
as a group name.

JPEG/GIF/3GP files (i-motions with video
only) can be displayed.

Longitude/Latitude/Datum/Accuracy/
Positioning time and date can be registered.

Phonebook can be displayed only under
Secret mode with Secret attribute "ON".

Secret code can be added when sending a
mail to the other party setting Secret code.

Ring tone/Vibrator/Receiving lamp can be
set.

Ring tone/Vibrator/Receiving lamp can be
set.

Ring tone/Vibrator/Receiving lamp/Notice
time can be set.

Individual message can be set. Cannot be set.

4

*

Specify

Up to 50

items

Up to 10 two-byte (Full Mark) or 21
one-byte (Half Mark)
be entered.

Up to 12 two-byte (Full Mark) Kana or
25 one-byte (Half Mark)
alphanumeric or mark characters can
be entered.

Only 1 phone number can be
registered for each phonebook. Up to

3

*

26 digits

Only 1 mail address can be
for each phonebook.
Up to 50 one-byte (Half Mark)
alphanumeric characters and marks
can be entered.

Can be selected from 10 groups. Up to
10 two-byte (Full Mark) or 21 one-byte
(Half Mark)
entered as group name.

Cannot be set.

Cannot be set.

Cannot be set.

Cannot be set.

Cannot be set.

Cannot be set.

Cannot be set.

can be entered.

1

*

can be registered.

characters can be

1

*

characters can

2

*

registered

88

Icons

*1Only up to 10 characters can be saved when two-byte (Full Mark) and one-byte (Half Mark) characters are

mixed or one-byte (Half Mark) Kana is included.

*2Only up to 12 characters can be entered when two-byte (Full Mark) and one-byte (Half Mark) characters are

mixed.

*3Some UIM (FOMA card) can register only up to 20 digits numbers.
*4Images may not be able to be displayed due to image size etc.

Item FOMA terminal phonebook UIM (FOMA card) phonebook

Others

Up to 256 one-byte (Half Mark)

Homepage

Free memo

Blood type Blood type can be selected. Cannot be set.

Birthday

Star sign

ZIP code Up to 7 digit numbers can be entered. Cannot be set.

Address

Hobby

alphanumeric characters and marks can be
entered.

Up to 100 two-byte (Full Mark) or 200 one­byte (Half Mark) characters can be entered.

Can be entered in one-byte (Half Mark)
number. (in western year)

Star sign can be entered. Displayed
automatically by entering birthday.

Up to 50 two-byte (Full Mark) or 100 one­byte (Half Mark) characters can be entered.

Up to 10 two-byte (Full Mark) or 20 one­byte (Half Mark) characters can be entered.

Cannot be set.

Cannot be set.

Cannot be set.

Cannot be set.

Cannot be set.

Cannot be set.

Displaying names

       Ｒｅｃｅｉｖｉｎｇ

Name/Phone number/Image registered in Phonebook are
displayed in receiving voice-calls/video-phone calls. Also displayed
in Redials or Received calls etc.

•

Registered information cannot be displayed when receiving calls

Ｓａｎｙｏ Ｈａｎａｋｏ

XXXXXXXX

Screen receiving

a voice-call

without CallerID.

• Names etc., registered in UIM (FOMA card) phonebook, may not be

able to be displayed during reading UIM (FOMA card) or right after the
power is turned on.

Phonebook

INFORMATION

• In case E-mail address or phone number is registered in Phonebook, a name is displayed on received/sent

address history in sending/receiving i-mode mail or SMS.

Register to phonebook

Registering entries in FOMA terminal phonebook

Can register the basic information, such as phone number and mail address etc., and the
information, such as address and birthday etc. Also can specify the individual Ring tone and
message. Operations to specify the basic information, Ring tone, and other information are
described as follows.

•

Up to 500 can be registered. Up to 3 phone numbers and 3 E-mail addresses can be registered for each entry.

Hold down U for over a second.

1

See next page

89

Press 1 "Phone".

2

Ｐｈｏｎｅｂｏｏｋ

Ｂａｓｉｃ Ｓｐｅｃｉｆｙ Ｏｔｈｅｒｓ

００１

［

Ｎａｍｅ

］

Ｇｒｏｕｐ ０
ＯＦＦ
Ｎｏ ｌｏｃａｔｉｏｎ ｉｎｆｏ

Phonebook

registration screen

Register basic information

3

 Entering name

Phonebook

a Select and press C.
b Enter a name and press C.

Phonebook registration screen is displayed.

• Press 2 "UIM", and the entry is registered in UIM (FOMA card).

P94

• Up to 16 two-byte (Full Mark) or 32 one-byte (Half Mark) characters can be entered.

• Kanji, Hiragana, Katakana, alphanumeric characters, marks, pictograms, and emoticons can

be entered.

• Names must be entered. Otherwise the data cannot be registered without entering.

• Reading of the name is displayed on with entering name.

• Entered in alphanumeric characters, the reading is displayed the same as the name. Also

pictures or some marks entered in the name is not displayed in the reading.

 Correcting the reading

Can correct the readings entered automatically.

a Select and press C.
b Enter a reading and press C.

• Up to 32 one-byte (Half Mark) characters can be entered as Reading.

 Entering the Phone number

a Select and press C.
b Enter a phone number and press C.

• Phone number can be entered up to 26 digits including "e", "f","c" and "P".

c Select the number type and press C.

• is displayed on the screen after entering a phone number. Up to 3 phone numbers can be

entered.

• Select the phone number to use regularly when registering more than 2 phone numbers.

 Entering E-mail address

a Select and press C.
b Enter an E-mail address and press C.

• Up to 50 one-byte (Half Mark) alphanumeric characters and marks can be entered.

c Select a type of the E-mail address and press C.

• is displayed on the screen after entering an E-mail address. Up to 3 E-mail addresses can

be entered.

• Select the E-mail address regularly used when registering more than 2 E-mail addresses.

 Setting group

Being set as "Group 0" without setting.

a Select and press C.
b Select the group and press C.

• 0 to 19 numbers can be selected as a group number.

90

 Setting image

1 item can be registered.

a Select and press C.
b Press one of 1 to 5.

My picture : Select a data from My picture folder in Data box and press C.
i-motion : Select a data from i-motion folder in Data box and press C.
Snap photo : Starts still image shooting. Shoot a still image and press C.
Shoot movie : Starts movie recording. Record a movie and press C.

OFF : An image cannot be registered.

• Set position or size etc. and press C when Preview screen is displayed.

 Inserting location information

Select and press C.

• Following operations: P329 "Adding Location information" Step 4

 Setting Chara-den

Sets to display a character as substitutive image in connecting video-phone calls.

a Select and press C.
b Press 1 "Chara-den".

• Press 2 "OFF" not to set Chara-den.

c Select a Chara-den and press C.

• Press m [Play] to confirm Chara-den.

 Setting Secret attribute

Can be set under Secret mode.

a Select and press C.
b Press 1 "ON".

• Press 2 "OFF" not to set.

 Setting Phonebook number

a Select and press C.
b Enter Phonebook number and press .C

• Numbers can be entered also by pressing J.

Press R s Set individual Ring tone.

4

 Setting Individual phone receive call

a Select and press C.
b Press 1 "ON".

• Press 2 "OFF" not to set.

c Select and press C.
d Select a Ring tone and press C.

• Can be selected from Melody/i-motion folder in Data box.

• Press m [Play] to confirm.

e Select and press C.
f Press one of 1 to 6.

• Press 7 "OFF" not to set Vibrator and go to Step ⑧ .

g Press one of 1 to 3.

• Press m [Check] s Press C to confirm the vibration.

Phonebook

See next page

91

h Select and press C.
i Press one of 1 to 4.

• Press 5 "OFF" not to set Receiving lamp and go to ⑪ .

j Press one of 1 to 7.

• Colors of Receiving lamp P126

k Press p [Define].

 Setting Individual video-phone receive

a Select and press C.
b Press 1 "ON".

• Press 2 "OFF" not to set.

c Set an item.

• The operation is the same as the operation of "Setting Individual phone receive call".

d Press p [Define].

 Setting Individual mail receive

Phonebook

a Select and press C.
b Press 1 "ON".

• Press 2 "OFF" not to set.

c Set the item.

• The operation is the same as the operation of "Setting Individual phone receive call".

d Select and press C.
e Enter the notice time and press C.

• 1 to 30 seconds can be entered.

f Press p [Define].

 Setting Individual message

a Select and press C.
b Press 1 "ON".

• Press 2 "OFF" not to set.

c Select an Answer message and press C.

• Press m [Play] to confirm Answer message.

• The message can be recorded as you like and set as answer message. P73

Press R s Register other information.

5

 Setting URL of Homepage etc.

a Select and press C.
b Enter URL and press C.

• Up to 256 one-byte alphanumeric characters and marks can be entered.

 Setting free memo

a Select and press C.
b Enter memo and press C.

• Up to 100 two-byte (Full Mark) or 200 one-byte (Half Mark) characters can be entered.

 Setting blood type

a Select and press C.
b Press one of 1 to 5.

 Setting Birthday

a Select and press C.
b Enter the birthday and press C.

• Star sign is entered automatically with entering birthday.

* miniSD memory cards are optional accessori es.P361

92

 Setting Star sign

Can change the star sign entered automatically.

a Select and press C.
b Select a star sign and press C.

 Setting Zip code

a Select and press C.
b Enter a Zip code and press C.

 Setting Address

a Select and press C.
b Enter an address and press C.

• Up to 50 two-byte (Full Mark) or 100 one-byte (Half Mark) characters can be entered.

 Setting Hobby

a Select and press C.
b Enter the hobby and press C.

• Up to 10 two-byte (Full Mark) or 20 one-byte (Half Mark) characters can be entered.

Press p [Register].

6

INFORMATION

• Press p [Function] s Select "New to phonebook" and press C s Press 1 “Phone“ to register new entry

from Search phonebook screen.

• If you register E-mail address of i-mode terminal, domain name ("@docomo.ne.jp") can be omitted. (Other than

i-mode terminal, enter an entire E-mail address including the domain name after "@" when entering E-mail

address in Phonebook.) However, registered in phonebook with "@docomo.ne.jp" omitted, a name is not

displayed on the received mail depending on settings.

• When Chara-den or still image set in Phonebook are deleted, default image of each setting takes over.

• The data registered in your FOMA terminal may not be able to be transferred to new FOMA terminal depending

on the model, when changing model and transferring the data at DoCoMo shop.

• May take time to display the image depending on the size and the quantity of the image data registered in

Phonebook.

• If registered with "184" or "186" added, the phone number cannot be used as the address for SMS. Also, if the

E-mail address is registered as "184 or 186 c Phone number of FOMA terminal @docomo.ne.jp", cannot be

used as the address for i-mode mail.

• It is recommended that you keep a separate written record of all the information you register in the Phonebook

or use miniSD memory card to save. The data can be stored in your PC using data link software and the FOMA

USB cable (optional).

P361, 520

• When a call or an E-mail is received from the party that Secret attribute is set under Secret mode, Arrival act

follows the Arrival act setting in Phonebook. When not under Secret mode, Arrival act follows the setting of

sound or vibrator etc. in Settings.

• Phonebook data may be lost due to FOMA terminal malfunction, repairs, changes of the model or other

reasons. Also Phonebook data remains for about 1 month after the battery pack is removed or runs out, but

may be lost after this amount of time. DoCoMo assumes no responsibility for accidentally erased data.

Phonebook

Setting Secret code on E-mail address

This function is to add Secret code automatically in creating new i-mode mail from Phonebook, with
the other party registering Secret code on your E-mail address and with Secret code set to your
FOMA terminal.

•

Secret code cannot be set with no E-mail address registered.

• "0000" cannot be set as Secret code.

See next page

93

Select and press C on Phonebook registration display.

1

Enter the security code and press C.

2

Ｓｅｃｒｅｔ ｃｏｄｅ

Ｓｅｔ ｓｅｃｒｅｔ ｃｏｄｅ

Ｖｉｅｗ ｓｅｃｒｅｔ ｃｏｄｅ
Ｒｅｌｅａｓｅ

Press 1 "Set secret code", select an E-mail address, and press C.

3

• Press 2 "View secret code" to confirm Secret code.

Phonebook

• Press 3 "Release" to release Secret code setting.

Enter 4 digits number and press C.

4

Press 1 "Yes".

5

• Press 2 "No" not to set.

Press p [Register].

6

INFORMATION

• Do not add Secret code directly to the E-mail address in Phonebook. Enter Secret code in Secret code setting.

Register to UIM (FOMA card) Phonebook

Secret code screen is displayed.

Registering entries into UIM (FOMA card) Phonebook

• Up to 50 items can be registered.

94

Hold down U for over a second.

1

Press 2 "UIM".

2

Ｐｈｏｎｅｂｏｏｋ

[

Ｎａｍｅ

Ｇｒｏｕｐ ０  

UIM (FOMA card) phonebook

registration screen

] 

Phonebook registration screen is displayed.

Setting items

3

 Entering name

a Select and press C.
b Enter a name and press C.

• Up to 10 two-byte (Full Mark) or 21 one-byte (Half Mark) characters can be entered. (Only up

to 10 characters can be entered when two-byte (Full Mark) and one-byte (Half Mark) characters
are mixed or one-byte (Half Mark) Kana is included.)

• Kanji, Hiragana, Katakana, alphanumeric characters, marks, pictograms, and emoticons can

be entered.

• Names must be entered. Otherwise the data cannot be registered without entering.

• Reading of the name is displayed automatically on with entering a name.

• Entered name in alphanumeric characters, the reading is displayed the same as the name. Also

pictures or some marks entered in name are not displayed in the reading.

 Correcting Reading

Can correct the readings entered automatically.

a Select and press C.
b Enter the reading and press C.

• Up to 12 two-byte (Full Mark) Kana or 25 one-byte (Half Mark) alphanumeric or marks

characters can be entered as reading. (Only up to 12 characters can be entered when two-byte
(Full Mark) and one-byte (Half Mark) characters are mixed.)

 Entering Phone number

a Select and press C.
b Enter the phone number and press C.

• Phone number can be entered up to 26 digits including "e", "f","c" and "P".

 Entering E-mail address

a Select and press C.
b Enter E-mail address and press C.

• Up to 50 one-byte (Half Mark) alphanumeric characters and marks can be entered.

 Setting Group

Being set "Group 0" without setting.

a Select and press C.
b Select the group and press C.

• 0 to 9 can be selected as a group number.

Press p [Register].

4

INFORMATION

• Press p [Function] s Select "New to phonebook" and press C s Press 2 “UIM“ to register new entry

from Search phonebook screen.

• Some UIM (FOMA card) can register only up to 20 digits as Phone number.

Phonebook

Registering to Phonebook from Redial or Received calls

Press S.

1

Redial list screen or Received calls list screen is displayed.

 Registering from Address history

Press S s Press m [AdrsHist].

See next page

95

Select a Phone number or an E-mail address to register and press C.

2

Press C s Select "New to phonebook" and press C.

3

 Adding data to phonebook entry already registered

a Press C s Select "Add to phonebook" and press C.
b Select a phonebook and press .C

• Following operations: P101 "Editing saved Phonebook entries" Step 3 to 5

Press 1 "Phone" or 2 "UIM".

4

• Following operations: P89 "Registering entries in FOMA terminal phonebook" Step 3 to 6, P94

"Registering entries into UIM (FOMA card) Phonebook" Step 3 to 4

Edit Group

Editing Group

Phonebook

You can change Group name or Group icon in Phonebook. And also Ring tone/Message/
Chara-den can be set for each group of FOMA terminal phonebook.

Press U.

1

• Press C when Group search screen is displayed.

Press p [Function] s Select "Edit group" and press C.

2

• Press p [UIM] to edit UIM (FOMA card) phonebook group, ( is displayed at the upper right

corner on the screen.)
Only a Group name can be edited in UIM (FOMA card) phonebook.

Select Group and press C.

3

Ｄｅｔａｉｌｅｄ ｇｒｏｕｐ

Ｇｒｏｕｐ ０  
ＯＦＦ
ＯＦＦ
ＯＦＦ
ＯＦＦ
ＯＦＦ

Group detail screen is displayed.

96

Set items.

4

 Setting Group icon

a Select and press C.
b Select Group icon and press C.

 Setting Group name

a Select and press C.
b Enter Group name and press C.

• Up to 10 two-byte (Full Mark) or 21 one-byte (Half Mark) characters can be entered. (Only up

to 10 characters can be entered as group title of UIM (FOMA card) phonebook when two-byte
(Full Mark) and one-byte (Half Mark) characters are mixed or one-byte (Half Mark) Kana is
included.)

 Setting Group ring tone

a Select and press C.
b Press 1 "ON".

• Press 2 "OFF" not to set.

c Set Ring tone.

• Operations: P91 "Setting Individual phone receive call" Operation c to d.

d Select and press C.
e Press 1 "Specify" s Press J to adjust the volume and press C.

• Press 2 "Not specify" not to specify.

f Select and press C.
g Select an image and press C.

• Image can be selected from My picture/i-motion folder in Data Box.

• Set position or size etc. and press C when Preview screen is displayed.

h Set Vibrator.

• Operations: P91 "Setting Individual phone receive call" Operation e to g.

i Set Receiving lamp.

• Operations: P91 "Setting Individual phone receive call" Operation h to j .

j Press p [Define].

 Setting Video-phone receive group

a Select and press C.
b Press 1 "ON".

• Press 2 "OFF" not to set.

c Set an item.

• Operations are the same as "Setting Group ring tone".

d Press p [Define].

 Setting Receive mail group

a Select and press C.
b Press 1 "ON".

• Press 2 "OFF" not to set.

c Set an item.

• Operations are the same as "Setting Group ring tone".

d Select and press C.
e Enter the notice time and press C.

• 1 to 30 seconds can be entered.

f Press p [Define].

 Setting Message group

a Select and press C.
b Press 1 "ON".

• Following operation: P92 "Setting Individual message" Step c

• Press 2 "OFF" not to set.

 Setting Chara-den

Select and press C.

• Following operations: P91 "Setting Chara-den" Step b to c.

Press p [Save].

5

Phonebook

See next page

97