Docomo FOMA D851IWM User Manual

Download

Page 1

Quick Search/Contents/Cautions

Before Using D851iWM

Making/Receiving Calls

Making/Receiving Video-phone Calls

06.3

Sounds/Displays/Lights Settings

i-mode/i-motion

MobaHO!/Music Player/FM Radio

Displaying/Editing/Managing Data

Other Convenient Functions

Network Services

Data Communication

Appendix/Data Interchange/Troubleshooting

Phonebook

Safety Settings

Camera

Mail

ppli

i-channel

Character Entry

INDEX/Quick Reference Manual

Page 2

DoCoMo W-CDMA System

Thank you for selecting the FOMA D851iWM. Carefully read this manual, as well as the individual manuals for other devices such as the battery pack, before using your FOMA D851iWM, and consult the corresponding manuals while using the phone so that you are able to use it correctly and effectively. If you are unclear as to any point indicated in any of these manuals, contact the DoCoMo Information Center that is listed on the back of this manual. Your FOMA D851iWM is a valuable asset. Handle it with care and it will be your trusted partner for years to come.

Before using your FOMA terminal

●The FOMA terminal is cordless so you may not be able to use it in certain locations where

signals cannot penetrate, such as in tunnels, underground, in some buildings or outdoors if the signal is weak or you are outside the service area. You also may not be able to use your FOMA terminal on the upper floors of some highrise building, even though there is nothing around you that interferes with the signal. Please note that your call may be disconnected even when the signal is strong (when the signal strength indication shows three bars) and you are not moving.

●When using the FOMA terminal in public, busy or quiet places, be careful not to disturb others.

●Since the FOMA terminal relies on radio transmission, it is theoretically possible for third

parties to intercept a call; however, because the W-CDMA system automatically employs a secrecy function for all calls, a third party will pick up nothing but signal noise.

●Since the FOMA terminal operates by the wireless transmission of voices converted to digital

signals, if you are in a location where the signal is weak, the original voice may not be accurately reproduced from the received digital signal, therefore, the voice you hear may differ from the original sound of the speaker’s voice.

●DoCoMo asks that you keep a separate record (e.g. written copy) of all information you store

in your FOMA terminal. DoCoMo accepts no responsibility whatsoever for any loss that occurs should the contents of the FOMA terminal’s memory be lost or altered.

●The user hereby agrees that the user shall be solely responsible for the result of the use of

SSL. Neither DoCoMo nor the certifier as listed herein makes any representation and warranty as for the security in the use of SSL. In the event that the user shall sustain damage or loss due to the use of SSL, neither DoCoMo nor the certifier shall be responsible for any such damage or loss. Certifier: VeriSign Japan K.K., Betrusted Japan Co., Ltd., GeoTrust Japan, inc.

●The FOMA terminal can be used in the FOMA Plus-Area.

●The FOMA terminal can be used only via the FOMA network provided by DoCoMo.

Using a FOMA terminal for the first time

When you use a FOMA terminal for the first time, read this manual in the following order. You can understand the preparations for using the FOMA terminal and its basic operations.

1. Install the battery pack and charge it. ☛P41, 42

2. Turn the power on and make initial settings, and then confirm your phone number. ☛P46, P49

3. Understand the functions of keys on the terminal. ☛P26

4. Understand the meaning of icons displayed on the screen. ☛P30

5. Understand how to use the menus. ☛P32

6. Understand how to make and receive calls. ☛P52, P62

●In the manual for FOMA D851iWM, the FOMA D851iWM is usually referred to as “FOMA terminal”.

●Unauthorized copying of a part or all of the contents of this manual is prohibited.

●The contents of this manual are subject to change without prior notice.

Page 3

How to use and refer to this manual

You can look for functions or operation procedures that you want to know using various searching ways.

Contents/Cautions

Quick Search/

Refer to INDEX P416

Search for a function name or service name.

Use Quick Search P4

Search for frequently-used or useful functions using easy-to-understand words.

Use Front Cover Indexes

Search by turning over the pages on this manual using the front cover indexes.

Front Cover

For details, see the next page.

Use Contents P6

Refer to the contents classified into chapters on an objective basis.

Refer to Features P8

Search for the features using typical or new functions of D851iWM.

Use Menu List P370

Search using the menu of D851iWM.

Use Quick Reference Manual P420

This manual describes how to operate frequently-used functions. Use it by separating from this instruction manual.

Explanatory note on procedures and keys

● The operation procedure is mainly explained in shortcut operations. When there are two or more possible

procedures, the simplest one is mentioned.

● In this manual, the operation procedures are described as follows:

Description Meaning

0 z o z Enter the terminal

security code

● If there is especially no notice, the operation procedures from the stand-by display are mentioned.

● In this manual, to place the cursor at an item with O (Easy Selector Plus) is referred to as “highlight”. In

addition, to select an item by placing the cursor with O (Easy Selector Plus) and pressing o (Enter key) is referred to as “select”. The step of pressing o which requires after entering characters in the entry field is omitted in description.

● The procedure for entering characters is mainly explained by in-line entry (direct insertion of text into the

entry field). ☛P360

● In this manual, the keys are simplified.

Actual key

Description in

this manual

Press m0 on the stand-by display and then press o. Continuously, enter the terminal security code and press o.

How to use and refer to this manual

Page 4

Contents/Cautions

Vibrator Setting ..........................119

i- ppli.................................... 251

Video-phone ................................ 80

Brightness/color density........... 88

Camera Settings ......................88

Change images (Image Setting)

Chara-den ................................

• Mute the sound heard when pressing keypads.....120

Keypad Sound

• Use your favorite ring tones............................... 116

Sound Setting

• Adjust the volume of ring tones ...........................68

Ring Volume Setting

• Turn Silent Mode on .......................................... 121

Silent Mode

• Use the vibrator for incoming calls ....................119

Vibrator Setting

• Customize the call indicator’s color and pattern.... 134

Alert Lighting Setting

• Use a personal ring tone for each caller.............. 97

Phonebook New Entry

How to change melodies or lighting patterns

Sounds/Displays/Lights Settings

Sound Setting

Changing the FOMA terminal ring tone ........................... .. Sound Setting 116

Using vibrator to signal incoming calls and alarms ....... Vibrator Setting 119

Setting a sound heard when the keys are pressed .......... Keypad Sound 120

Setting an alert sound fo r charging ........ .............................. Charge Alert 120

Setting an alarm announcing that the call is about to be cut off

........................ ............................................ ............................ Quality Alarm 120

Making FOMA terminal sile nt ..... .......................................... ... Silent Mode 121

Customizing Silent M ode ................ ..................... Customize Silent Mode 122

Making/Receiving Calls

Phonebook

Sounds/Displays/Lights Settings

Safety Settings

Camera

Quick Search/

How to use and refer to this manual

Shown below is an example when you search for the page where “Vibrator Setting” is described.

How to use and refer to this manual

Searching on INDEX

Use INDEX if you have already known a function or service name.

▲

Using Quick Search

You can easily search for frequently-used or useful functions.

Using Front Cover Indexes

You can find a target page by proceeding from the front cover to the cover of a chapter (the first page of the chapter) and the page where a function is described.

▲

Page 5

Contents/Cautions

Menu 884

Preventing making/receiving calls Self Mode

Disable all functions that require communications such as making or r eceiving calls or sending or receiving mails. Infrared data communication and infrared remote control are also disabled.

 (for over a second) z Select Yes

Self Mode is set and is indicated on the stand-by display.

Default OFF

L/s

rbiV

Using vibrator to signal incoming calls and alarms Vibrator Setting

Received calls, mail or Message R/Fs, etc., are indicated by vibration.

･

The settings in this function are reflected to the setting for the vibrator in Incoming Call Setting, Incoming Videophone Setting, Incoming Msg.Setting, Incoming Chat Mail Setting and Incoming Msg. Alert.

･ Note that if FOMA terminal is placed on a desk, etc. with Vibrator Setting on, the vibrations of the

vibrator operation may cause it to fall off.



Select an item

･ If the incoming setting for Incoming Chat Mail Setting is set to Same : Msg setting, ChatMail cannot

be set.

･ As for a schedule alarm, the terminal vibrates as set in Phone setting.

 to 

･ If you set to Pattern A, the terminal vibrates as follows: about 0.5 second vibration → about 0.5

second pause → about 0.5 second vibration→ about 1.5 second pause (repeated)

･ If you set to Pattern B, the terminal vibrates as follows: about 1 second vibration→ about 2

Default all OFF

Quick Search/

▲

When a calendar is set

The day is displayed in yellow.

INFORMATION

● An image and a calendar can be set simultaneously. However, if an animation, Created animation or Flash

movie is set, the calendar is displayed when pressing  after the playback is stopp ed or paused.

▲

119

● The page shown above is an example. It may be different from the actual page.

● The displays or illustrations provided in this manual are for information purposes only and may be

different from the actual products.

● The default setting for Style Theme (☛P137) at the time of purchase is ■ TGB design. However, the explanations in this manual mostly refer to situations where that setting is ■ Prag.

● Explanations in this manual that are common to MobaHo!, the Music Player, and the FM Radio referred to collectively as “Audio Functions”.

● Some screens do not support the bilingual function and items or buttons may be displayed in Japanese. In this manual, these Japanese words are written by both in Japanese and English only for the first time in a chapter or a section.

●The days-off and holidays are displayed in red, Saturdays are displayed

in blue. The settings for the days-off and holidays follow Day Off Setting or the setting for holidays for Scheduler. Note that when Privacy Mode is on (Authorized access set for Schedule) or PIM Lock is on, the day set as day-off in Day Off Setting is not displayed in red and reset to the

Dot

default display.

●When a schedule is set, a dot is displayed on the upper right of the date.

Note that all schedules with Secret Attribute set are displayed only when Secret Mode is on. In addition, they are not displayed when Privacy Mode is on (Authorized access set for Schedule) or PIM Lock is on.

●Each press of  on the stand-by display s witches between displaying

and not displaying the calendar.

Index

Title & Function name: Function names are listed on INDEX.

Functional overview and notes for operation

Default setting

Operation procedure

Supplement to the operation

Shortcut operation ☛P34

Column: Useful information

INFORMATION: Indicated in this manual as follows.

Other operational

●：

procedures

●：Points of caution

●：More detailed

explanation(s) on the corresponding function

How to use and refer to this manual

Page 6

Contents/Cautions

Quick Search/

Quick Search

Use this Quick Search to look for the frequently-used or convenient functions directly.

Quick Search

Useful functions for phone calls

• Notify/not notify your phone number....................49 Caller ID Notification

• Talk facing the phone screen ..............................81 Speakerphone function

• Adjust the volume of caller’s voice ......................67 Volume Setting

• Put the current call on hold..................................53 On-hold

• Switch to video-phone call during voice call........ 55

Switch to video-phone

When unable to answer an incoming call

How to change melodies or lighting patterns

• Record caller’s messages ................................... 75 Answer Machine

• Use Voice Mail Service......................................348 Voice Mail

• Put the incoming call on hold...............................70 Response and Hold

• Mute the sound heard when pressing keypads.....120 Keypad Sound

• Use your favorite ring tones...............................116 Sound Setting

• Adjust the volume of ring tones ...........................68 Ring Volume Setting

• Turn Silent Mode on .......................................... 121 Silent Mode

• Use the vibrator for incoming calls ....................119 Vibrator Setting

• Customize the call indicator’s color and pattern....134 Alert Lighting Setting

• Use a personal ring tone for each caller .............. 97

Phonebook New Entry

How to change the screen display

• Customize the stand-by display (wallpaper)...... 122

• Show a calendar on the stand-by display ......... 126 Stand-by calendar

• Adjust the date and time...................................... 47 Date and Time Setting

• Change the size of characters........................... 135 Font Size

• Learn the meaning of icons on the screen .......... 30 Reading display

Stand-by Display Setting

Page 7

Contents/Cautions

Quick Search/

Advanced functions for mail

Audio functions

Settings for your phone safety

Other useful functions

• Send your original Deco-mail ............................ 208 Deco-mail

• Send images with mail....................................... 212 Attachment

• Sort and save mail automatically....................... 230 Sort Criteria

• Listen to MobaHO! broadcasts .......................... 264 SDMB

• Listen to music .................................................. 273 Music player

• Listen to FM radio..............................................278 FM radio

• Keep your phonebook data secret..................... 113 Secret Attribute

• Reject calls without caller ID.............................. 152 Anonymous Caller

• Reject callers not registered in the phonebook ..... 154

Reject non-Reg. Caller

• Lock your phone when you don’t carry it........... 145 Remote Lock

• Disable the key operation.................................. 150 Key Lock

• Call up function menus simply............................. 34 Shortcut operations

• Use the Camera ................................................157 Camera

• Use your phone as a calculator......................... 340 Calculator

• Send/receive data via infrared communication...... 311

Infrared communication

• Use your phone as an alarm clock .................... 325 Alarm Clock

• Update software ................................................405 Software Update

• Update the security............................................ 410 Virus Scan Function

Quick Search

Page 8

Contents/Cautions

Quick Search/

Before using your FOMA terminal............. Inside front cover

Using a FOMA terminal for the first time..... Inside front cover

How to use and refer to this manual ................................... 1

Contents

Quick Search.......................................................................4

Features of FOMA D851iWM.............................................. 8

Making full use of D851iWM .............................................10

SAFETY PRECAUTIONS (Always follow these directions) ..... 12

Handling instructions.........................................................20

About intellectual property rights.......................................22

Basic package and optional accessories ..........................24

Before Using D851iWM 25

Names and functions of parts Reading the display Menu selection Using the UIM (FOMA card) Attaching/removing the battery pack Charging Battery Level Power ON/OFF Select Language Date and Time Setting Caller ID Notification Own Number etc.

Making/Receiving Calls 51

Making calls Redial 186/184 Call WORLD CALL Receiving calls Any Key Answer Open Answer Close Setting Received Calls Volume Setting Ring Volume Setting Response and Hold Public mode (Driving mode/power off) Answer Machine etc.

Making/Receiving Video-phone Calls 79

Making video-phone calls Receiving video-phone calls Using Chara-den Setting images to send Customizing video-phone call display Videophone Settings etc.

Phonebook 95

Phonebook New Entry Group Setting Phonebook Search Edit Phonebook Delete Phonebook Secret Attribute Quick Dial etc.

Sounds/Displays/Lights Settings 115

Sound Setting Vibrator Setting Silent Mode Stand-by Display Setting Mail/Call Image Setting Alert Lighting Setting Clock Display Format Style Theme etc.

Safety settings 139

Security Code Change Terminal Security Code PIN code All Lock Remote Lock Self Mode PIM Lock Keypad Dial Lock Privacy Mode Setting Key Lock Secret Mode etc.

Camera 157

Still Camera Movie Camera Setting for shooting etc.

i-mode/i-motion 175

What’s i-mode? Site display Change i-mode Password Internet Connection Bookmark Screen Memo Save Image i-melody i-mode Setting Message R/F Certificate i-motion Downloading i-motion i-motion Setting etc.

Page 9

Contents

Mail 201

Composing and sending i-mode Mail Deco-mail Attachment Saving i-mode Mail Receiving i-mode Mail Check i-mode Message Display Play/Save Melody Mail Setting Chat Mail Composing and sending SMS etc.

Save Image i-motion Mail

i-αppli 245

Downloading Starting i-αppli i-αppli To i-αppli Stand-by Display etc.

i-channel 259

i-channel Channel List Ticker Setting

MobaHO!/Music Player/FM Radio 263

Listening to MobaHO! broadcasts Playing music files FM Radio Setting Audio Functions etc.

Displaying/Editing/Managing Data 289

Displaying/Editing images Playing/Editing video/i-motion Chara-den Playing melodies Managing data Infrared communication Sound Recorder etc.

Other Convenient Functions 321

Multiaccess Multitask Edit by Slide Auto Power ON/OFF Alarm Clock Scheduler Custom Menu Own Number Call Duration/Call Cost Rest Call Cost Call Cost Limit Calculator Notepad Remote Controller with Microphone Earphone/Microphone Set with Switch Quick Start-up Reset Delete All Data etc.

Contents/Cautions

Quick Search/

Contents

Network Services 347

Voice Mail Call Waiting Call Forwarding Nuisance Call Blocking Caller ID Request Dual Network English Guidance Service Dialing Number Arrival Call Act Remote Control Multi Number etc.

Data Communication 355

Data communication Flow of setup AT command etc.

Character Entry 359

Entering characters 5-touch Input Method Save Phrase Copy Character KUTEN Code Input Save Word Slot Input Method Input Method Setting

Appendix/Data Interchange/Troubleshooting

Menu list Registered data at purchase List of dial keys and character assignments Troubleshooting Error Message Warranty and After-Sales Service Software Update Virus Scan Function etc.

369

INDEX/Quick Reference Manual 415

INDEX Quick Reference Manual

Page 10

Contents/Cautions

Quick Search/

Features of FOMA D851iWM

FOMA is the name of a set of services provided by DoCoMo based on W-CDMA, which is recognized as one of the systems compliant to the global standard for third generation mobile communications (IMT-2000).

It’s amazing because it’s i-mode!

Features of FOMA D851iWM

i-mode is an online service used with i-mode terminals. This service supports connection to i-mode Sites (Programs) or i-mode compatible Internet web sites that provide a variety of useful information and allows you to exchange i-mode Mail.

i-motion

Video/sound can be downloaded from sites to enjoy them. i-motion obtained can be set to a ring tone or incoming image (Movie ringtone). ☛P198

Main functions of FOMA D851iWM

i-channel

This allows you to receive graphical information about news and weather conditions. You can get information on a regular basis and run the latest information on the stand-by display as tickers. Also, a list of channels available can be displayed by pressing the i-channelcompatible key ( detailed information by selecting your desired channel in the i-channel list. Our free Trial channel is available over the fixed period of time for customers who have not applied to i-channel service.

• i-channel is a pay service and requires a subscription.

). In addition, you can get rich,

☛P260

Video-phone

Allows you to see and talk with others in real time. The FOMA terminal is already set at the time of purchase to enable you to converse with the other party through the speakerphone, so you can start using the video-phone right away. ☛P80

Safety settings

Secret Mode

The phonebook data and the schedule data that have set a secret attribute can not be displayed except when Secret Mode is on. ☛P151

• For details on other Safety settings ☛P139

i-motion Mail

Video taken with the built-in camera or i-motion downloaded from sites can be attached to i-mode Mail to send them. ☛P212



i-αppli/i-αppli DX

Downloading a variety of i-αppli from the sites allows you to make the best use of them, including setting them as the stand-by display. i-

ppli DX provides better uses in conjunction with i-mode terminal information such as phonebook and mail data. ☛P246

Deco-mail

Allows you to compose and send your original messages. Enjoy expressive decorated mail by changing the character color and size or background color, and by pasting images such as Deco-mail pictures or still images shot with the built-in camera in the text. Since templates can be used with this function, you can create Decomail in the same style as for Deco-mail you have received or downloaded form Internet websites. ☛P208

Privacy Mode

By setting Privacy Mode, access to phonebook entries, mail messages, images, schedules, received calls, redials is prevented without entering the terminal security code. You can also set Privacy Mode automatically when you do nothing for a certain period of time on FOMA terminal.

☛P148

Wide array of network services

● Voice Mail Service (charged)

● Call Forwarding Service (free of charge)

● SMS (Short Message Service) (free of charge)

☛P240

☛P348

☛P350

● Call Waiting Service (charged)

● Dual Network Service (charged)

*1 Separate application is required.

☛P349

☛P351

Page 11

Useful functions

Contents/Cautions

Quick Search/

MobaHO!

● This function allows you listen to music and

audio channels from MobaHO!* programs such as the latest top hits and the top 10 countdown, etc., are available. ☛P264

● You can record between 20 to 30 hours of

broadcasts* songs and listen to them with the Music Player. ☛P269, P270

*1 MobaHO! is a fee-based digital satellite broadcast

service offered by MOBILE BROADCASTING CORPORATION. A separate subscription is required to receive this service.

*2 The amount of recording time possible will differ

due to the different amount of information for each program.

. You can then select recorded

. A variety of

Music Player

● You can record up to 2,800 minutes of music

files downloaded from a music CD and/or Internet music site onto the 1 GB of built-in memory*

● During playback, you can display pre-

registered Flash movie as an animation or photographs as a slideshow.

● The integrated low power consumption

technology (dedicated music IC chip)* enables up to 20 hours of continuous music playback.

*3 This time estimate is based on files saved in the

ATRAC3plus format at a bit rate of 48 kbps.

. ☛P274

☛P42

☛P286

FM Radio

You can listen to FM radio (76.0 MHz to

90.0 MHz) and television broadcasts (channels 1 to 3). You can also easily record your favorite channels by selecting the prefecture of use. ☛P278

Animation Menu

The menu of the animation by Flash movie

(Flash

menu) is provided. ☛P32

One-push open

You can quickly slide and open your FOMA terminal with one hand at the touch of the onepush open button on the side of the terminal.

Functions working with slide operation

● To receive an incoming call, open FOMA

terminal by slide operation. ☛P65 To put the call on hold or end the conversation, close it. ☛P65

● The reply screen or the edit screen can be

displayed by only opening FOMA terminal while a received mail or schedule is displayed. ☛P324

Voice call and packet communication can be used simultaneously. This allows you to talk during an i-mode connection or send/receive mail while talking. ☛P322

Allows you to execute several functions at the same time and perform operations by switching the screen. For example, you can read mail or register phonebook entries while making a phone call or while listening to music or to the radio, etc.

Allows you to select matching settings for the image designs, etc., for an overall coordinated look.

In addition to the normal menu, you can use another menu to display frequently-used functions such as でんわ (phone), メール (mail), 音楽／カメラ (music/camera) and i モード

(i-mode) in large size of characters.

The 2.8-inch large TFT LCD (240 x 400 dots) is provided for the display. It clearly displays fine images and characters on the large screen.

The time in FOMA terminal is automatically corrected by the information from DoCoMo network. Also you can set the time on your phone ahead or back, if you want. ☛P47

FOMA terminal also supports ring tones such as PCM generated 64-note harmonic, voice and sound effects (ADPCM sounds), etc.

Exchange data between two FOMA terminals using infrared communication. Also, you can operate devices that support TV infrared remote control from your FOMA terminal. ☛P311, P315

● The camera is built into the display side of the

● Allows you to record or play video with smooth

Multiaccess function

Multitask function

☛

P323

Style Theme

☛P137

Simple menu

☛P33

High-definition large display

Automatic time correction

High-quality melody playback

Infrared communication/infrared remote control

Built-in camera

FOMA terminal. You can select from also select from various photo modes such as Framed Photos, Burst Mode, etc. Effective pixels: 320,000 Max record pixels: 310,000

motion and high quality. ☛P165, P297

More usable mail functions

● When you move from outside the service area to inside the service area, unsent mail set to auto-

send is sent automatically. ☛P216

● If the text of reply mail is registered beforehand, you can reply mail easily (Quick Reply). ☛P234

● You can search mail from the phonebook or the calendar easily. ☛P104, P332

● The characters are efficiently convertible with ATOK+APOT (AI Predicted Conversion) provided.

Features of FOMA D851iWM

Page 12

Contents/Cautions

Quick Search/

Making full use of D851iWM

A variety of functions of D851iWM visual communications are explained here.

Telling feelings by Chara-den

When talking by video-phone, a character

Making full use of D851iWM

can be displayed on the other party’s screen instead of your self image. If the action (movement or expression) is put by the key operation, your feeling can also be expressed. ☛P85, P303

Your screen The other party’s screen

Action list displayed in ticker

Press the key to indicate actions.

©BVIG

The character moves.

©BVIG

Deco-mail

You can decorate your mail by changing the character color or pasting images or pictures. Preinstalled Deco-mail picture allows you to set the image easily. ☛P208 Also, you can create Deco-mail easily by using Deco-mail template. ☛P377

Example of

Deco-mail picture

Examples of

Deco-mail template

i-channel

You can receive a variety of information on a regular basis without additional operations. In addition, press the i-channel compatible key ( more richly detailed information. ☛P260

) to display the channel list so that you can get

Not subscribed After subscription

Connected

Page 13

Customizing the screen

･ You can display new arrived information such as unread mail, missed call, calendar or schedule on the

stand-by display and check the contents by simple operations (Custom stand-by display). In addition, images in the folder you have selected can also be displayed at random on the stand-by display. ☛P127, P125

･ By Style Theme, the stand-by display or color scheme can be set in total. ☛P137

Custom stand-by display

Press o to select. You can check the contents.

Example of Style Theme ( ■ Prag)

G-GUIDE TV Remote Controller

G-GUIDE TV Remote Controller is a free i-αppli service that conveniently combines the TV program information and TV remote controller function. You can get the time schedule and information of desired TV program at anytime from anywhere. Titles, information and start/end time for the TV programs depending on the TV stations in your area are available with this function. You can notify your friends of titles and broadcasting schedules for the TV programs that you like via mail by using Recommendation M ail. Also, you can remotely control your TV with G-GUIDE TV Remote Controller (some terminals are not compatible with this function). ☛P315

The screen shown above is for information purpose only and may differ from the actual screen. The actual screen displays the channels in your area.

Contents/Cautions

Quick Search/

Making full use of D851iWM

Watch a slide show or animation while listening to music

You can display a slideshow of still images that you have taken and/or other images, or display Flash images as animation, while listening to music or recorded MobaHO! broadcasts. Save the still images and/or other images that suit your favorite song or artist in individual folders and select that folder to display the contents as a slideshow. (Visual setting) ☛P286

Standard audio playback screen Visual screen

Press t 2 times. The content set in

the visual setting is displayed.

Page 14

Contents/Cautions

Quick Search/

SAFETY PRECAUTIONS

SAFETY PRECAUTIONS (Always follow these directions)

● Read the following SAFETY PRECAUTIONS to ensure that the phone is used correctly. Also,

store this manual in a convenient location for future reference.

● It is essential that these precautions be observed to prevent injury to the user and third parties as

well as damage to property.

● The following symbols are used to indicate the degree of danger or damage that may

result from failing to follow the specified precautions.

Indicates an imminently hazardous situation, which, if

DANGER WARNING CAUTION

●

The following symbols are used to highlight instructions that are very important

and that must be strictly followed.

This indicates the action is prohibited.

not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, may result in injury or property damage.

This indicates disassembly is prohibited.

This indicates that handling with wet hands is prohibited.

This indicates an action that must be performed in accordance with the directions.

This indicates you must remove the plug from the power outlet.

● SAFETY PRECAUTIONS is separated into eight categories.

Handling the FOMA terminal, battery pack, adapter (and charger) and the UIM (general information) ...

Handling the FOMA terminal................................................................................................... P14

Handling the battery pack .......................................................................................................P16

Handling the remote controller with microphone..................................................................... P17

Handling the headphones with built-in antenna ...................................................................... P17

Handling optional devices (AC adapter/DC adapter/desktop cradle/in-car holder)................. P17

Handling the UIM (FOMA card) .............................................................................................. P18

Handling the FOMA terminal in the vicinity of medical devices .............................................. P19

This indicates the part must not be exposed to water.

P13

Page 15

Handling the FOMA terminal, battery pack, adapter (and charger) and the UIM (general information)

DANGER

Use only DoCoMo-certified battery packs, adapters (and chargers) with the FOMA terminal.

Use of non-specified items could cause the FOMA terminal, battery pack or other devices to leak, overheat, rupture, catch fire or malfunction.

Battery pack: D07 Desktop cradle: D01 Rear cover: D09 FOMA AC adapter: 01 FOMA DC adapter: 01 Headphones with built-in antenna: D01 In-car holder: 01

Remote Controller with Microphone: D02

･ For additional items related to the compatible products, contact the nearest DoCoMo Shop.

Do not disassemble or remodel the components. Also, do not solder them.

Attempting to do so will lead to an accident, such as a fire, injury, or electrical shock and damage the equipment. Doing so may also cause the battery pack to leak, overheat, rupture, or ignite.

Do not use or leave the components in a place near fire or heaters. Also avoid a high-temperature place exposed to direct sunlight or a car under the scorching sun.

Otherwise, your equipment will get deformed or troubled. The battery pack may leak, overheat, rupture, or ignite. Other possible problems include a reduction in performance and life. Sometimes, the casing will partly get heated, resulting in an extremely high temperature to get you burnt.

Do not expose the components to water.

The components may overheat, cause electric shock, fire or damage if exposed to water, pet urine or other liquids. Do not use the equipment in locations where it could get wet.

WARNING

Contents/Cautions

Quick Search/

SAFETY PRECAUTIONS

Do not use in environments exposed to combustible or explosive materials, such as a gas station.

Using the equipment in locations exposed to flammable gases or liquids such as propane or gasoline could cause fire or explosion.

Do not place the battery pack, FOMA terminal, adapter (and charger) or UIM in the microwave oven, high-pressure cooker or other cooking appliances.

Doing so could cause the battery pack to leak, overheat, rupture or ignite, and could damage the circuitry of the FOMA terminal and adapter (and charger), causing overheat, smoke or fire.

Do not expose the components to strong shocks by dropping or throwing them.

Doing so could cause the battery pack to leak, overheat, rupture or ignite, and damage the equipment, resulting in fire.

Do not let the recharging terminal and external device terminal touch any conductive material, such as a piece of metal or lead. Also do not put any conductive material into the recharging terminal and external device terminal.

The battery can short-circuit, causing fire and damage.

If there is anything wrong (such as strange odor, heat generation, color change, deformation, or the like) with the components while you are using or charging them or when they are being stored, you should take the following steps immediately.

1. Remove the power plug from the outlet.

2. Turn off your FOMA terminal.

3. Remove the battery pack from your FOMA terminal.

Continuing to use the equipment without taking these steps will cause it to overheat, rupture, or ignite or cause its battery pack to leak.

Page 16

Contents/Cautions

Quick Search/

CAUTION

SAFETY PRECAUTIONS

When a child uses the FOMA terminal, first be sure an experienced adult teaches proper usage methods and techniques. Observe the child to determine that they are using the FOMA terminal correctly.

Failure to do so could result in injury.

Keep out of the reach of small children.

The components can be accidentally swallowed, resulting in injury.

The temperature of FOMA terminal or the battery pack adapter (and charger) may become high during charging of the battery, repeated or extended continuous use of video recording/playback, the video-phone, i-mode or iextended continuous listening to MobaHO! or playing music.

If you touch the part with a high temperature directly for a long time, redness, itchiness, rash, etc. may arise in your skin depending on your constitution or condition. Especially note that if you use it continuously for a long time while FOMA terminal is connected to an adapter (and charger).

Handling the FOMA terminal

Turn off the FOMA terminal inside an aircraft, hospital or other location where use of mobile phones is prohibited.

The FOMA terminal may interfere with the correct functioning of electronic equipment. If the automatic power on function is used, cancel the setting and turn the power off. Observe any regulations posted in medical facilities. If you have done prohibition acts such as using the FOMA terminal inside an aircraft, you may be punished as stipulated by law.

Turn off the FOMA terminal in the vicinity of electronic equipment that relies on highprecision control or faint signals.

The FOMA terminal may interfere

･

with the correct functioning of such electronic equipment. Examples: hearing aids, implanted cardiac pacemakers, implanted defibrillators, other medical devices, fire alarms, automatic doors and other automatically controlled equipment. Users of such medical equipments should check with the electronic equipment or device manufacturer with respect to the effect of electromagnetic interference.

Do not place the components on an unstable or tilted surface.

Doing so could cause the equipment to slide off, possibly causing personal injury or damaging the equipment.

Do not store in locations subject to high temperature and humidity or excessive dust.

Doing so could damage the equipment.

WARNING

Do not place the FOMA terminal in a breast or inner pocket if you are carrying or using electronic medical equipment.

The FOMA terminal could cause any medical equipment in its vicinity to malfunction.

People with weak hearts should take care with respect to setting the incoming vibrator and ring volume.

The FOMA terminal may interfere hearts.

ppli, or repeated or

Page 17

Do not aim the infrared port at eyes and attempt to transmit.

Eyes could be affected. Aiming at other infrared devices and transmitting could cause other devices to malfunction.

When you talk under hands-free settings (with the speakerphone function), be sure to keep a distance between FOMA terminal and your ear.

Doing so could cause the hearing loss.

Do not use the FOMA terminal while driving.

From November 1, 2004, using mobile phones while driving is set as the object of penal regulations. Even if you use the handsfree device, park the car in a safe place before using the phone. Set Public mode or Voice Mail Service while driving.

If you hear thunder while using the FOMA terminal outdoors, immediately turn the power off and move to a safe location.

Use of the phone in such a situation could expose you to lightning strikes or electric shock.

Do not place your FOMA terminal in an area over an air bag or in an air bag deployment area such as on a dashboard in a vehicle.

If the air bag inflates, the FOMA terminal may hit you and injury and damage to itself could result.

Contents/Cautions

Quick Search/

SAFETY PRECAUTIONS

Do not set the headphone volume to a level at which you cannot hear the sounds around you while walking. In addition, pay due attention to traffic and surrounding road conditions.

Failure to do so could cause an accident.

Do not listen to MobaHO!, music or the FM Radio while driving an automobile or riding a motorcycle or bicycle.

It will be difficult to hear the sounds around you and may avert your attention from signs and indications, possibly causing an accident. In addition, pay due attention to traffic while walking. Be especially careful at railroad crossings and crosswalks.

CAUTION

Rarely, some FOMA terminal users may develop itching, skin irritation or eczema. If such a condition occurs, stop using the FOMA terminal immediately and seek medical attention.

Metal is used in the following components:

Part Material

The side of the display side case Magnesium alloy MD1D (JIS) equivalents*

*1 Although painted, the skin may be touched if it separates.

Do not swing the FOMA terminal around by the strap.

Doing so could cause injury to yourself or a third party or damage the phone.

Use in certain makes of cars may affect onboard electronic equipment.

Continued use under such conditions could cause unsafe driving. Do not use the FOMA terminal in such a case.

Do not allow water or other liquids, pieces of metal or other foreign material to enter into the UIM slot of the FOMA terminal.

Doing so could cause fire, electric shock, or damage to the FOMA terminal.

Do not bring magnetic cards near the FOMA terminal.

Magnetic data stored on bank cards, credit cards, telephone cards, and floppy disks may be corrupted or lost.

Page 18

Contents/Cautions

Handling the battery pack

Quick Search/

■Check the battery type indicated on the

battery pack label.

Indication Battery type

Li-ion Lithium ion battery

DANGER

SAFETY PRECAUTIONS

If electrolyte from the battery pack gets in your eyes, do not rub; instead, rinse immediately with copious amounts of clean water and seek medical attention.

Doing so could cause the loss of vision.

Do not attach metallic materials such as wire to the port. Do not carry or store the battery pack together with a necklace or other metallic items.

Doing so could cause the battery pack to leak, overheat, rupture or catch fire.

Do not pierce the battery pack with nails, hammer on it or step on it.

Doing so could cause the battery pack to leak, overheat, rupture or catch fire.

Do not throw the battery pack into a fire.

Doing so could cause the battery pack to leak, overheat, rupture or catch fire.

When you attach the battery pack to the FOMA terminal, never attempt to forcefully insert, because it should slide in easily and fit correctly. Check the direction of the battery pack and try again.

Doing so could cause the battery pack to leak, overheat, rupture or catch fire.

WARNING

Should any electrolyte from the battery pack come into contact with your skin or clothing, immediately stop using the battery and rinse with clean water.

Failure to do so could cause skin injuries.

If the battery pack leaks or emits strange odors, immediately stop using it, and always keep away from sources of fire.

Failure to do so could cause the battery liquid to catch fire, and the battery pack itself to rupture.

Stop charging if it is not possible to fully charge the battery pack within the specified time.

Failure to do so could cause the battery pack to leak, overheat, rupture or catch fire.

CAUTION

Do not dispose of the battery pack with other regular household waste.

Failure to properly dispose of the battery pack in an environmentally sensitive manner could cause the battery pack to catch fire and damage the environment. Use adhesive tape to cover the terminal of battery pack when it is no longer used and bring it to a DoCoMo Shop after the insulation. Alternatively, you can also dispose of the battery pack in accordance with local regulations.

Page 19

Handling the remote controller with microphone

CAUTION

When using the remote controller with microphone, be careful not to pinch your finger with the clip.

Pinching your finger may result in injury or damage to the device.

Handling the headphones with built-in antenna

CAUTION

When using the headphones with built-in antenna, be careful to wear it correctly and not get the neckband or cord caught in other people’s belongings or accessories when in crowded places.

The cord could become wrapped around your neck and result in injury or damage to the device.

Handling optional devices (AC adapter/DC adapter/desktop cradle/in-car holder)

WARNING

Contents/Cautions

Quick Search/

SAFETY PRECAUTIONS

Use care not to short circuit the recharging terminal when the adapter (and charger) is connected to a wall outlet or cigarette lighter socket. Do not touch the recharging terminal with your hands or fingers, or some other part of the body.

Doing so could cause fire, equipment failure, electric shock or other injury.

Do not use th desktop cradle in bathrooms or other potentially high humidity locations.

Doing so could cause electric shock.

Never use the adapter (and charger) when it has a damaged power cord.

Failure to do so could result in electric shock, overheat or fire.

If the adapter (and charger) or holder is exposed to water or other liquid, immediately disconnect the power plug from the wall outlet or cigarette lighter socket.

Failure to do so could result in electric shock, smoke or fire.

e AC adapter and

Do not touch the adapter (and charger) cord or wall outlet with wet hands.

Doing so could cause electric shock.

When the adapter (and charger) is not to be used for a prolonged period, disconnect the power plug from the wall outlet.

Failure to do so could result in electric shock, fire, or equipment failure.

When connected to a wall outlet, make sure that the AC adapter does not come into contact with metallic straps or other metal objects and the plug is properly seated.

Failure to do so could result in electric shock, short circuit, or fire.

Page 20

Contents/Cautions

Quick Search/

SAFETY PRECAUTIONS

Be sure the power plug is free of dust.

Failure to do so could cause the equipment to catch fire.

During charging, place the adapter (and charger) and desktop cradle in a stable location. Do not cover or wrap the adapter (and charger) and desktop cradle with a cloth or blanket, etc.

Using the equipment under such conditions could cause the FOMA terminal to be detached from the holder, or cause a heat buildup that leads to fire or equipment failure.

The DC adapter is for use with negative ground cars. Do not use it with positive ground cars.

Doing so could result in fire.

Do not touch the FOMA terminal and AC/DC adapter when hearing thunder.

Contact with the FOMA terminal and adapter could cause you lightning strikes or electric shock.

CAUTION

Use the designated power source and correct voltage.

Use of incorrect voltage could cause fire or equipment failure. When using your FOMA terminal overseas, use the FOMA domestic/overseas AC adapter 01.

AC adapter: 100V AC FOMA domestic/overseas AC adapter:

(Always connect to the outlet for internal household use.) DC adapter: 12V DC, 24V DC

100V to 240V AC

(specific for negative ground) vehicle)

Use only the specified fuse for the DC adapter.

Use of the incorrect fuse could cause fire or equipment failure. Check the instruction manual for details of the correct fuse to use.

Disconnect the power plug before beginning any maintenance.

Failure to do so could cause electric shock.

Do not place heavy objects on the adapter (and charger) cord or power cord.

Doing so could cause electric shock or fire.

Handling the UIM (FOMA card)

Take care when removing the UIM (the IC).

Failure to do so could cause injury to hand and fingers.

CAUTION

Do not yank on the adapter (and charger) cord or power cord when disconnecting the adapter (and charger) from the wall outlet.

Doing so could damage the cord, resulting in electric shock or fire.

Page 21

Handling the FOMA terminal in the vicinity of medical devices

The information given below conforms to the guidelines set forth by the Electromagnetic Compatibility Conference regarding the protection of electronic medical equipment from radio waves emitted by mobile phone units.

WARNING

Contents/Cautions

Quick Search/

Turn off the FOMA terminal on packed trains or in crowded places as someone with an implanted cardiac pacemaker or implanted defibrillator may be nearby.

The electromagnetic waves emitted by your phone could affect the function of an implanted cardiac pacemaker or implanted defibrillator.

When inside a medical institution, always remember the following guidelines:

･

Never take the FOMA terminal inside an operating room, intensive care unit (ICU) or coronary care unit (CCU).

･ Always turn off the FOMA terminal in hospital wards. ･ Even in the lobby and other areas, always turn off the FOMA terminal when electronic medical

equipment is nearby.

･ Follow the directives of the medical institution. There may be specific regulations as to items that

are prohibited or use of which is restricted.

･ If you are using the automatic power on function, cancel the setting and turn off the power.

If you have an implanted cardiac pacemaker or implanted defibrillator, keep your FOMA terminal at least 22 cm away from it.

The electromagnetic waves emitted by your phone could affect the function of an implanted cardiac pacemaker or implanted defibrillator.

If you are using electronic medical equipment other than implanted cardiac pacemakers or implanted defibrillators at your home or outside the confines of a medical institution, be sure to check with the manufacturer about possible adverse effects caused by electromagnetic interference.

The electromagnetic waves emitted by your phone could affect the function of electronic medical equipment.

SAFETY PRECAUTIONS

Page 22

Contents/Cautions

Quick Search/

Handling instructions

General

●Do not get the components wet.

The FOMA terminal, battery pack and adapter (and charger) are not waterproof. Avoid using the components

Handling instructions

in a bathroom or other high humidity areas or locations exposed to rain. If you carry the components, sweat could cause internal corrosion that leads to equipment failure. As a result of investigation, if component failure is found to be water-related, repair is not covered by the warranty and may not be able to be performed. In such a case, should it be found to be possible to repair the unit, you will be billed for all repairs.

●Clean the components with a soft, dry cloth.

• Clean the components using a soft, dry cloth (such as a lens cloth).

• Using alcohol, thinner, benzene or detergents could cause the printed text to fade or disappear, or the equipment to become discolored.

●Occasionally clean the terminals with a dry cotton swab.

Dirty terminals could cause intermittent contact that could interrupt the flow of power to the unit. Such a situation also causes insufficient charging. Use a dry cloth or cotton swab to clean the terminal.

●Do not place the components near an air conditioner vent.

Sudden changes in temperature could cause condensation, leading to corrosion inside the components and equipment failure.

●Do not place the FOMA terminal in locations where it could be exposed to excessive pressure.

Do not place it in a bag together with many other things or in your pocket when you sit down as this could exert pressure on the LCD or damage the internal boards, resulting in equipment failure. Damage arising from such causes is not covered by the warranty.

●Carefully read the instruction manuals supplied with the battery and adapter (and charger) before use.

FOMA terminal

●Avoid extremely high or low temperatures.

Use in an environment with a temperature of 5-35°C and relative humidity of 45 to 85%.

●If the FOMA terminal is used near a radio, television or general subscriber phone, it could affect such

equipment. Use the phone as far away from such equipment as possible.

●With regard to data stored in the FOMA terminal, keep it separately in a memo, etc. so as not to

permanently lose important data.

NTT DoCoMo cannot be held responsible in any way for the loss of stored data.

●Do not put the FOMA terminal in your back pocket and sit on it. Avoid putting the phone in the bottom

of a bag, etc. where it is subject to excessive pressure.

Damage may result.

●Do not close the FOMA terminal with the strap held inside.

Malfunction or damage may result.

●It is normal for the FOMA terminal to become warm during using or recharging. You can continue to

use it while warm.

●Do not aim the camera directly at the sun and leave it.

Elements may be discolored or baked.

●While the MobaHO! is activated, the FOMA terminal gets heated. Take especially care when you

touch the terminal with your hand or face.

Battery pack

●The battery pack will gradually wear out.

Battery life also depends on how you use the battery pack; you know it is time to replace it when the usage time is very short even though you fully charge it. The specified battery pack can be purchased separately.

●Recharge the battery pack in locations where the ambient temperature is between 5°C and 35°C.

Page 23

●When using for the first time or after a long period of non-use, be sure to fully charge the battery pack

before use.

●The time of use provided by the battery pack depends on the ambient conditions and the condition of

the battery pack itself.

●Do not expose to the direct sunlight and high temperature. Please keep your battery in an airy and

cool place.

When you do not use your phone for a long time, please detach the battery from the FOMA terminal in its

depleted state and place it in the plastic bag the battery pack came in for storage.

Adapter (and charger)

●Recharge the battery pack in a location where the ambient temperature is between 5°C and 35°C.

●Do not recharge in the following locations:

• Locations that are subject to high humidity, dust or excessive vibration

• Near general subscriber phones, TVs or radios

●It is normal for the adapter (and charger) to become warm during recharging. You can continue

charging with a warm adapter.

●When the battery pack is recharged using the DC adapter, always keep the car engine running.

Failure to do so could cause the car battery to run down more quickly than normal.

●When an outlet with falling prevention mechanism is used, check the instruction manual for the outlet

before use.

●Do not expose to the strong shock and deform the recharging terminal.

Giving the strong shock on an adapter can cause damage.

UIM (FOMA card)

●Do not use excessive force to remove the UIM.

●Do not place an excessive load on the UIM when inserting it into the terminal.

●The UIM becomes warm during use. This is normal and not a cause for concern.

●Note that any card failures resulting from inserting the UIM in an IC card reader/writer not designated

by NTT DoCoMo are the responsibility of the customer.

●Make sure that the ICs are kept clean.

●Use a clean dry cloth for cleaning the UIM.

●It is recommended that users maintain data stored on the UIM in some other form.

If the data should be erased, NTT DoCoMo assumes no responsibility for the loss of any data.

●The UIMs that are no longer used should be returned to a DoCoMo Shop for environmental protection.

●Avoid extremely high or low temperature.

●Take care not to damage, touch, or short-circuit the ICs to prevent them from losing their data or from

malfunctioning.

●Take care not to drop the UIM or give shock to the UIM to prevent it from malfunctioning.

●Do not bend the UIM and place heavy stuff on it to avoid a failure.

Contents/Cautions

Quick Search/

Handling instructions

Camera

If you should use the FOMA terminal to make a public nuisance, you might be punished under the laws and bylaws such as Japan’s nuisance prevention ordinance.

Please be considerate of the privacy of individuals around you when taking and sending images using camera-equipped mobile phones.

Page 24

Contents/Cautions

Quick Search/

About intellectual property rights

Copyrights and portrait rights

Except in cases where reproduction and quoting for private use is sanctioned under copyright laws, the reproduction, alteration and public transmission of such content as text, images, music or software for which

About intellectual property rights

another party owns the copyrights, whether accomplished by using this product to photograph or record that content or by downloading it from Internet websites, is prohibited without the permission of the owner. Taking photographs or recordings of such events as performances and exhibitions may be prohibited even for purposes of private use. In addition, if you use this product to take another person’s photograph without their permission, or display such a photograph without their permission on an Internet website and make that content public to an indeterminate number of people, you may be in violation of portrait rights.

Trademarks

Company names and trade names used in this manual are the trademarks or registered trademarks of their respective companies.

･ “FOMA”, “mova”, “i-motion”, “i-mode”, “i-

“i-anime”, “DoPa”, “mopera”, “mopera U”, “WORLD CALL”, “WORLD WING”, “Short Mail”, “QUICKCAST”, “Chaku-motion”, “Deco-mail”, “V-Live”, “i-area”, “Chara-den”, “i“Dual Network”, “FirstPass”, “sigmarion”, “Security Scan”, “musea”, “visualnet”, “Public mode”, “Multi Number”, “トクだねニュース便 (Convenient News)”, “My DoCoMo”, “MUSIC PORTER X” and FOMA, i-mode, iDoCoMo.

･ “ キャッチホン (Call Waiting)” is a registered trademark of Nippon Telegraph and Telephone Corporation. ･ Microsoft

countries.

ppli and MUSIC PORTER X logos are trademarks or registered trademarks of NTT

and Windows® are registered trademarks of Microsoft Corporation in the US and other

･ Java and all Java-related trademarks are trademarks or registered trademarks of Sun Microsystems, Inc.

in the US and other countries.

･ Powered by JBlend

JBlend and all JBlend-based trademarks and logs are trademarks or registered trademarks of Aplix Corporation in Japan and other countries.

･ “Multitask” is a registered trademark of NEC Corporation. ･ NetFront and are trademarks or registered trademarks of ACCESS

CO., LTD. in Japan and other countries.

･ Contains Macromedia

FlashTM Player technology by Macromedia, Inc.

･ McAfee and VirusScan are registered trademarks or trademarks of McAfee, Inc. and/or its affiliates in

･ Adobe and Reader are trademarks or registered trademarks of Adobe Systems Incorporated in the US

and other countries.

･ Powered By Mascot Capsule

Mascot Capsule® is a registered trademark of HI CORPORATION.

/Micro3D Edition

･ “BeatJam” is copy-protected material of Justsystem Corporation. Copyrights and other rights related to

“BeatJam” belong to Justsystem Corporation and other respective owners of those rights.

･ “BeatJam”, “ATOK” and “APOT”（Advanced Prediction Optimization Technology）are registered

trademarks of Justsystem Corporation.

ppli”, “i-αppli search”, “i-motion mail”, “i-shot”, “i-melody”,

ppli DX”, “i-channel”,

Page 25

･ “OpenMG”, “ATRAC”, “ATRAC3plus” and “ATRAC3” are trademarks of Sony Corporation. ･ “G-GUIDE Mobile”, the G-GUIDE Mobile logo, “G-GUIDE” and the G-GUIDE logo are registered

trademarks of Gemstar-TV Guide International, Inc. in the US or the affiliated company in Japan.

･ QuickTime is a registered trademark of Apple Computer, Inc. in the US and other countries. ･ “Privacy Mode” is a registered trademark of FUJITSU.

･

This product includes software licensed from Symbian Software Ltd. ‘Symbian’, ‘Symbian OS’ and other associated Symbian marks are all trademarks of Symbian Software Ltd. ©1998-2006 Symbian Software Ltd. All rights reserved.

･ MPEG Layer-3 audio coding technology is licensed from Fraunhofer IIS and Thomson multimedia. ･ MobaHO! and are trademarks or registered trademarks of Mobile Broadcasting

Corporation.

･ In addition to the above, company names and trade names used in this manual are the trademarks or

registered trademarks of their respective companies.

Other rights and responsibilities

･ This product is licensed based on MPEG-4 Visual Patent Portfolio License. The use of MPEG-4 Video

Codec function is allowed for personal and nonprofit use only in the following cases:

・Recording videos that conform to MPEG-4 Visual Standard (hereinafter referred to as MPEG-4

Video)

・Playing MPEG-4 Videos recorded personally by consumers not engaged in profit activities ・Playing MPEG-4 Videos supplied from the provider licensed from MPEG LA

For further utilizing such as promotion, in-house use or profit-making business, please contact MPEG LA, LLC in the US.

･ Licensed by QUALCOMM Incorporated under one or more of the following United States Patents and/

or their counterparts in other nations:

4,901,307 5,600,754 5,267,261 5,506,865 5,710,784 5,504,773 5,416,797 5,568,483 5,228,054 5,778,338 5,109,390 5,490,165 5,414,796 5,544,196 5,535,239 5,101,501 5,659,569 5,337,338 5,267,262 5,511,073 5,056,109 5,657,420

･ This product contains NetFront of ACCESS CO.,LTD. to provide Internet function.

NetFront is a trademark or registered trademark of ACCESS CO.,LTD. in Japan and other countries. Copyright© 1996-2006 ACCESS CO., LTD. This product contains a module developed by the Independent JPEG Group.

･ In this manual, each OS (Japanese version) is written for short as follows:

・Windows XP is the abbreviation for Microsoft

Microsoft

Windows® XP Home Edition operating system.

・Windows 2000 is the abbreviation for Microsoft ・Windows Me is the abbreviation for Microsoft ・Windows 98 is the abbreviation for Microsoft ・Windows 98SE is the abbreviation for Microsoft

EDITION.

・Windows NT Server is the abbreviation for Microsoft

system Version 4.0.

・It may describe like Windows XP, 2000, Me, 98 in parallel. ・Windows 98 and Windows 98SE are described as Windows 98 in all.

Windows® XP Professional operating system or

Windows® 2000 Professional operating system.

Windows® Millennium Edition operating system.

Windows® 98 operating system.

Windows® 98 operating system SECOND

Windows NT® Server Network operating

Contents/Cautions

Quick Search/

About intellectual property rights

Page 26

Contents/Cautions

Quick Search/

Basic package and optional accessories

Basic package

Basic package and optional accessories

FOMA D851iWM (including the written

warranty and the rear cover D09)

Instruction manual (this book)

Manual

Quick Reference Manual is appended on P420.

BeatJam Support Guide BeatJam Music Transfer Quick Guide (a separate booklet)

サ

ポ

ー

音

ト

楽

ガ

転

イ

送

ド

ク

イ

ッ

ク

ガ

イ

ド

Remote Controller with Microphone D02 (including the written warranty and the instruction manual)

CD-ROM for FOMA D851iWM

Contains the “Manual for Data Communication” (in PDF format)

USB Cable (including the instruction manual)

(supplied by cooperating manufacturers)

Headphones with built-in antenna D01 (including the written warranty and the instruction manual)

Optional accessories

FOMA AC adapter 01 (including the written warranty and the instruction manual)

･ Other optional accessories ☛P394

Desktop cradle D01 (including the written warranty, the instruction manual and the FM antenna [supplied by cooperating manufacturers]) ☛P288

Battery pack D07 (including the instruction manual)

Page 27

Before Using D851iWM

Names and functions of parts .........................................................................26

Reading the display ..........................................................................................30

Selecting the menu............................................................................................32

Number of saved, registered and protected items in D851iWM ...................38

Using the UIM (FOMA card) .............................................................................38

Attaching/removing the battery pack .............................................................41

Charging the battery of FOMA terminal ..........................................................42

Checking the remaining battery level..................................... Battery Level 45

Turning the power on/off ...................................................... Power ON/OFF 46

Switching to English display............................................. Select Language 47

Setting the date and time.......................................... Date and Time Setting 47

Notifying your phone number to the other party...... Caller ID Notification 49

Checking your own phone number......................................... Own Number 49

Page 28

Before Using D851iWM Names and functions of parts

Names and functions of parts

a Call indicator

Lights or flashes when a call or mail is received, FOMA terminal is opened/closed, shooting with the camera, etc. The lighting color and pattern can be set (☛P134). Lights or flashes for new information. Lights in red during charging.

Earpiece

Caller’s voice comes out of here.

c Display ☛P30 d m MENU/upper left soft/Silent Mode key

Use this key to display menus, perform the operation shown in the upper left part of the guide row, set/cancel Silent Mode, etc.

e t Start video-phone/scroll/lower left soft

key

Use this key to make/answer video-phone calls, scroll mail or site display by a page, switch between upper/lower cases when entering characters, perform the operation shown in the lower left part of the guide row, etc.

f n Start voice call/speakerphone/character

key

Use this key to make/answer voice calls, switch between ordinary and speakerphone calls, switch input modes for entering characters, etc.

g c i-channel/Clear key

Use this key to display the i-channel list, delete entry, return to the previous screen, set/cancel Self Mode, etc. On the ipress this key to start i-

ppli stand-by display,

ppli.

Size (mm) : 109 (H) x50 (W) x24 (D)

Weight (g): Approx. 136 (with battery pack)

(when closed)

h Dial keys

Used to enter phone numbers and text and to select menu items.

i ( /Public mode (Driving mode) key

Use this key to enter “ ”, set/cancel Public mode (Driving mode), switch screen modes during the camera use, etc.

j Microphone

Picks up your voice.

k Infrared data port ☛P311

Exchange data with the infrared communication.

l Camera ☛P88, P158

Used to take videos or photographs of yourself or send your image during a video-phone call.

m Easy Selector Plus

Enter key

Use this key to perform the selected operation, activate Focus Mode, start itouch Button, etc.

u Data Box/ ↑ key

Use this key to display Data Box menu, activate Camera, move the cursor upward, adjust volume, etc.

d i-mode/i-

Use this key to display i-mode menu or ifolder list, move the cursor downward, adjust volume, etc.

ppli/ ↓ key

ppli set for One-

ppli

Page 29

l Received Calls/ ←(previous) Key

Use this key to display the received call history, switch between pages, move the cursor leftward, set/cancel Privacy Mode, etc.

r Redial/ → (next) key

Use this key to display the redial data, switch between pages, move the cursor rightward, etc.

n p Phonebook/schedule/upper right soft key

Use this key to display the phonebook or schedule, perform the operation shown in the upper right part of the guide row, etc.

o a Mail/scroll/lower right soft key

Use this key to display Mail menu, compose new mail, scroll mail or site display by a page, perform the operation shown in the lower right part of the guide row, etc.

p f Power/End/Hold key

Use this key to turn the power on/off, end calls or functions in operation, place incoming calls on hold, cancel Secret Mode, etc. Also, use this key to switch displaying/not displaying the custom stand-by display or calendar.

q # #/Silent Mode/line-feed key

Use this key to enter “#”, set/cancel Silent Mode, start a new line when entering characters, etc.

r Auxiliary jack

Used to connect the included remote controller with microphone or the desktop cradle (sold separately).

s Rear cover t Speaker

Ring tone and other sounds come out of here. When the speakerphone function is used, the voice of the other party comes out.

u FOMA antenna (built-in)

Take care not to cover the built-in antenna with your hand so that you can use the FOMA terminal under better reception conditions.

v MobaHO! antenna (built-in)

When receiving MobaHO! broadcast using only the FOMA terminal, keep the antenna away from your body to improve reception conditions.

w Strap opening x External connection terminals ☛P44, P274

Used to connect various optional accessories.

y b TASK key

Use this key during Multiaccess or Multitask.

z C Audio function key

Use this key to display Answer Machine/Voice Memo menu, start Quick Record Message, use the Camera, stop ring tone/alarm sound, etc. You can also access the most recently used Audio Function by holding down this key for over a second on the stand-by display.

A Earphone/microphone jack

Used to connect a flat type earphone/microphone set with switch (sold separately).

B One-push open button

Use this button to open FOMA terminal.

C Keylock switch ☛P150

Use this key to set/cancel Key Lock.

Connecting to earphone/microphone set with switch

･ Connecting the included remote controller with

microphone and headphones with built-in antenna ☛P29

･ You can plug in a flat type earphone/

microphone set with switch (sold separately) and use it. Using the earphone jack converter adapter P001 (sold separately) allows you to use an existing earphone/microphone set.

Opening/closing FOMA terminal

To open FOMA terminal, press the one-push open button. To close it, slide the front face (with the display) downward.

One-push open button

Open

･ Operations such as accessing the screen to

reply to mail or to edit schedules or notes are made easily by opening FOMA terminal. ☛P219, P328, P341

･ FOMA terminal allows you to make calls without

opening it. You can also answer an incoming call by opening FOMA terminal and end or put on hold the call by closing it. ☛P65

･ Please note that if you open the terminal by

force without pressing the one-push open button or open and close it violently, it will cause the damage of the terminal.

Before Using D851iWM

Names and functions of parts

INFORMATION

● The auxiliary jack is for connecting the included remote controller with microphone or desktop cradle (sold

separately). NEVER connect another connector as it may cause damage.

Page 30

Before Using D851iWM Names and functions of parts

Using the included remote controller with microphone and headphones with built-in antenna

By connecting the included remote controller with microphone and the headphones with built-in antenna to the FOMA terminal, you can use listen to MobaHO!, music and the FM Radio. Use the keys on the remote controller with microphone to operate and switch between the Audio Functions, start replay and select stations, etc. It is also possible to make and receive basic phone calls.

･ Operation of the remote controller with microphone is possible whether the FOMA terminal is open or

closed.

･ For details, refer to the manual for the remote controller with microphone. ･ An antenna for MobaHO! is built into the headphones with built-in antenna.

c r Next Song/Station key

When listening to MobaHO!: Advances to the next channel. When the Music Player is in use: Advances to the next song. Fast forwards if held down for over a second during playback. When the FM Radio is in use: Advances to the next preset station. Performs Auto Station Selection if held down for over a second.

d x Audio Function key

Scrolls through the Music Player → FM Radio → MobaHO! pressed while one of the Audio Functions is in use. Activates the Audio Function that was last used if held down for over a second either in the stand-

a o Play/Pause key

When listening to MobaHO!: To start recording, hold down for over a second. Pause recording when pressed during recording. Press again during pause to resume reception. When the Music Player is in use: Start and pauses playback. When the FM Radio is in use: Press again during pause to resume reception.

Previous Song/Station key

When listening to MobaHO!: Skips to the previous channel. When the Music Player is in use: Skips to the previous song. Jumps back to the beginning of the current song if pressed during playback (if at least 1 second has elapsed). Rewinds if held down for over a second during playback. When the FM Radio is in use: Returns to the previous preset station. Performs Auto Station Selection if held down for over a second.

by display or during use of either of the other Audio Functions* hold down this key for over a second. *1 Actual operation will differ depending upon the

Audio Function in use. ☛P267

e Microphone

Speak into this portion of the device.

f u Volume Up key

Increases the volume of the Audio Function currently in use.

g d Volume Down key

Lowers the volume of the Audio Function currently in use.

h Hold key

Slide down in the direction of the arrow ▼ to lock out the functions of all keys except for the y key to prevent accidental operation. (It is not possible to lock out the y key.) To turn off the hold function, slide the key up in the opposite direction of the arrow ▼ .

i y Start/Stop key ☛P342

Hold down for over a second to make or receive a call.

. To quit the Audio Functions,

Page 31

Connecting the remote controller with microphone

･ Insert the connector plugs securely into the corresponding jack. If a plug is not securely inserted, you

may be unable to hear any audio and/or the remote controller with microphone may not work.

Insert the connector plug for the headphones with built-in antenna into the jack on the remote controller with microphone.

b With the side that says PUSH

facing to the rear, insert the connector plug for the remote controller with microphone into the FOMA terminal’s auxiliary jack.

To be worn as shown in the illustration.

Disconnecting the remote controller with microphone

While pushing in on the center of the side of the connector plug that says PUSH, pull the remote controller with microphone straight out.

b Hold the plug to the headphones

with built-in antenna and unplug it from the included remote controller with microphone.

Before Using D851iWM Names and functions of parts

INFORMATION

● Do not connect and attempt to use the included remote controller with microphone and the flat type earphone/

microphone set with switch (sold separately) simultaneously.

● Be sure to hold the connector jack and never pull on the plug when removing the included remote controller

with microphone and the headphones with built-in antenna as pulling on the plug may cause damage.

● Never pull on the cable or cord or hold dangle the main unit by the cable or cord when handling the included

remote controller with microphone and the headphones with built-in antenna.

● Do not insert pieces of metal, etc., into the jack on the remote controller with microphone that is used for the

headphones with built-in antenna.

● Using the headphones with built-in antenna at a high volume can damage your ears. Do not exceed a volume

at which you can hear and respond to others.

● Throwing or exposing the headphones with built-in antenna to strong impacts may result in damage to the

device.

Page 32

Before Using D851iWM

Reading the display

The description of icons displayed at the top or the bottom of the display are shown below:

Reading the display

i-channel receiving information

When you use the i-channel service, if Show ti cker is set to Yes in Ticker Setting, the i-channel received information is displayed as ticker on the stand-by display. ☛P262

: Battery level ☛ P45

///////

: Character input mode ☛P361

b : Received signal level ☛P46

: Out of service area ☛P46 : Self Mode is set ☛P146 : During data transfer ☛P311

In the audio memory mode ☛P274

c : In i-mode communication (during

d : Infrared communication in progress

e : Speakerphone function in operation

f : i-mode Mail and Message R/F storage

Data link software in progress ☛P395

i-mode connection) ☛P180

: In i-mode communication (during

packet communication) ☛P192, P217

☛P311 Infrared remote control function in operation ☛P315

☛P53

Communication USB by hands-free compatible equipment in progress

：Total call cost exceeds the maximum

limit ☛P340

space is full in the Center* P193

: i-mode Mail or Message R/F storage

space is full in the Center

: Unreceived i-mode Mail and Message

R/F in the Center ☛P218, P193

: Unreceived i-mode Mail or Message

R/F in the Center ☛P218, P193

a 〜 m

Date, day of the week and time

n o 〜 y

☛

P61

☛P218,

☛P218, P193

g : Unread i-mode Mail or SMS storage

space is full and SMS storage space is full on UIM ☛P241

: Unread i-mode Mail or SMS storage

space is full ☛P217, P241

: SMS full on UIM ☛P241 : Unread i-mode Mail and SMS exist

☛P217, P241

: Unread i-mode Mail exists ☛P217 : Unread SMS exists ☛P241

(blue/red)

: Unread Message R exists/unread

Message R storage space is full ☛P192

(green/red)

: Unread Message F exists/unread

Message F storage space is full ☛P192

j : i-

ppli running ☛P249

: i-

ppli stand-by display on ☛P126

: Starting i-

ppli from the i-αppli stand-by

display ☛P254

: i-

ppli DX running ☛P249

: i-

ppli DX stand-by display on ☛P126

: Starting i-

ppli from the i-αppli DX

stand-by display ☛P254

k : Displaying SSL page, using i-

downloaded from SSL pages and in SSL communication with i-

: Auto-send mail failed exists ☛P216 : Auto-send mail exists ☛P216

ppli

ppli ☛P181

l : Secret Mode is set ☛P151 m : i-

ppli auto start failed ☛P254

n : Focus Mode icon ☛P37 o : Silent Mode is set ☛P121

: Personalized silent mode is set ☛P122

p : Ring alert volume is silent ☛P68

: Vibrator for incoming voice call is set

☛P119

: Ring alert volume is silent and vibrator

for incoming voice call is set ☛P68, P119

: Public mode (Driving mode) is set ☛P72

r : Answer Machine is set ☛P75

: Recorded messages full ☛P75

s : Key Lock is set (in gray when Key Lock

is temporarily released) ☛P150

t : Connecting to the external devices by

the USB connection cable ☛P93

: Effective Easy Selector Plus keys in

Focus Mode ☛P37

v : Reading the UIM ☛P46

Page 33

w : PIM Lock is set ☛P147

: Keypad Dial Lock is set ☛P148

x : Alarm Clock is set ☛P325

: Schedule alarm is set ☛P328 : Alarm Clock and schedule alarm are

y : Software Update reserved ☛P408

: Auto-update of the latest pattern

definition is failed ☛P410

: Auto-update of the latest pattern

definition is succeeded ☛P410

set simultaneously

*1 The current highest priority item is displayed. These icons are listed in the order of priority from the top. *2 Displayed when the storage space for either i-mode Mail or Message R/F is full and other unreceived mail/

messages exist.

Before Using D851iWM

Reading the guide row

Operations that can be executed by pressing m, t, o, p and a are displayed in the guide row.

Example

Guide row for the mail composition screen

Guide row

Display positions and keys correspond as shown in the figure. In this manual, the operations displayed in the guide row are explained using the corresponding keys (mtopa). The operations displayed in the guide row differ depending on the screen.

･ on the guide row corresponds to O of the Easy Selector Plus

(it may be different depending on the used function or site).

Reading the task bar

The icon for the function (task) in progress is displayed on the task bar (up to 9 icons). You can confirm functions being used and run. In addition, when receiving mails/messages, the reception result is scrolled.

Task bar (Example when schedule calendar is displayed during a voice call)

: Voice call

: Video-phone (64 K/32 K) : Video-phone call through

external device : Mail : Receiving i-mode Mail : Receiving SMS : Chat Mail : Message R/F : Checking for i-mode Mail/SMS : i-mode/i-channel : Bookmark/Internet

Connection/Last Visited

URL/Screen Memo/i-mode

Shortcut

ppli

: i: My Picture (Image) : i-motion : Melody : Chara-den : Camera

: Movie Camera

: Sound Recorder

: Listening to MobaHO!/

MobaHO! program list display/MobaHO! channel setting display

: Recording a MobaHO!

broadcast

: Music Player

: FM Radio : Phonebook : Received Calls : Redial : Answer Machine/Voice Memo : Own Number : Setting an alarm/alarm

sounding : Scheduler : Schedule alarm sounding : Notepad : Calculator

: Data exchanging with

external device

: Saving to INBOX/setting

reception method for infrared

communication / (dark blue/gray) : In the audio memory mode

(communication is possible)/

(USB cable unconnected) : 64K data communication

: Originating/communicating/

sending/receiving packet via

USB / (dark blue/gray) : Setting/holding each

function : Software Update activated : Software Update notified : Update Definition activated/

version display : Setting each network service

Reading the display

Page 34

Before Using D851iWM

/ (black/gray)

Listening to MobaHO! with

Key Lock activated/MobaHO! program list display/MobaHO! channel setting display/ temporarily released

Reading the list screen

/ (black/gray) : Key Lock activated/

temporarily released (shown in the Music Player display)

/ (black/gray) : Key Lock activated/

temporarily released (shown in the FM Radio display)

Selecting the menu

Example

Color scheme screen

The number of the currently displayed page and the total number of pages (when a list extends over multiple pages)

indicates that other selectable items exist above and below the selected item.

･

to move the cursor

･ If you press d on the last item of the page, the next page appears, and if

you press u on the first item of the page, the previous page appears.

indicates that selectable items exist over multiple pages.

･ & to switch between pages ･ You cannot switch between pages on the icon selection screen, etc. ･ Color scheme names are named based on imagery.

INFORMATION

● Note that the following cases may occur due to the characteristics of liquid crystal display (LCD) and they are

not defects in FOMA terminal.

･ FOMA terminal display is manufactured by taking advantage of highly advanced technology but some dots

may be always or never lit.

･ When the battery pack is removed from FOMA terminal with the power turned on, residual images may

remain for some time. Remove the battery pack with the power turned off.

･ When a screen has been displayed for a certain time, if you change it to another screen with some

operations performed, residual images of the previous screen may remain.

Selecting the menu

In addition to the normal menu, the simple menu which offers popular features is provided. (You can switch to the simple menu only when Japanese is set in Select Language.) In the simple menu, the menu items are displayed in large letters. Also, you can create your original menu (Custom Menu ☛P334).

Display format for the normal menu and the custom menu

“Animation” in the normal menu is set by default. Select from the following types (Menu Setting ☛P132).

･

The following screens are examples using the normal menu when ■Prag

List view Tile display Animation*

*1 Setting only possible in the normal menu.

is selected for the Style Theme setting.

Page 35

Switching to the simple menu

Press a

■ Switching to the normal menu: ma on the stand-by display

･ To switch the custom menu: m

Functions available on the simple menu

Some menus cannot be accessed from the simple menu.

Menu Item Shortcut Menu Item Shortcut

でんわ電話帳検索

電話帳登録リダイヤル着信履歴伝言メモ一覧自局番号

メール受信メール

送信メール未送信メール新規メールｉモード問合せ

音楽／カメラ

モバ HO! ミュージックプレイヤー FM ラジオカメラマイピクチャ

The normal menu is displayed.

･ When the custom menu is displayed: p

The simple menu is displayed.

on the stand-by display

m11 m12 m13 m14 m15 m16

m0 m21

m22 m23 m24 m25 m31 m32 m33 m34 m35

音楽／カメラ

ｉモードｉMenu

ｉアプリソフト一覧

データ BOX 設定／

生活ツール

待受画面設定 USB モード設定

Bookmark ラスト URL 画面メモ

待受画面設定ｉアプリ設定

音／バイブディスプレイアラーム電卓伝言メモ設定情報表示／リセット留守番電話

Before Using D851iWM

Selecting the menu

m36 m37 m41 m42 m43 m44 m51 m52 m53 m6 m71 m72 m73 m74 m75 m76 m77

Page 36

Before Using D851iWM

When the simple menu is set

● During calling or talking, you can see how to adjust the volume of caller’s voice.

● In stand-by display, enter the phonebook No. (1 to 9) to see the registered names and telephone numbers.

Key operations for making voice calls/video-phone calls are also shown. During voice calls, you can also press m, select

ダイヤル入力

(Dial up) and enter a phonebook number to see the same information.

INFORMATION

● You cannot switch FOMA terminal to the simple menu when English is set in Select Language. Also, when you

Selecting the menu

choose the simple menu, the setting for Select Language is not available.

● Even if you selected the simple menu before turning your FOMA terminal off, the menu will change to the

normal one when you insert the UIM for which English display is specified as language and then turn the power on again.

Selecting functions from the menu

Select menu items using the dial keys (Shortcut operations). You can also use the Easy Selector Plus to select menu items.

･ In this manual, the operation procedure is mainly explained in shortcut operations of the normal

menu.

･ When any lock function is set or the UIM is not inserted, some functions are disabled. When “List

view” or “Tile display” is selected for the display style, the disabled functions are indicated by or dimmed. When “Animation” is selected for the display style, a message will be displayed when you select a disabled item.

Selecting menu items with the dial keys (Shortcut operations)

Each menu item has a number (item number) and can be selected by pressing the corresponding key.

Example

Executing Volume from the normal menu

m813

The screen for adjusting the volume is displayed.

813

When several shortcuts are available

When there are multiple shortcut operations, the shortcut operations other than the operation described in the operating procedure are shown at the far right of the title in the body text.

Example

ly called numbers Redial

lls that you made as dialed calls (Redial). When the other party is simple operation.

. When the number exceeds 30, the oldest one is deleted chronologically.

For redialing

Menu 45

Press m to show the menu, then press 4 then 5 to show the redial list.

･

means pressing a, and ? means pressing d.

Page 37

Selecting menu items with Easy Selector Plus

Example

Selecting menu items (List view)

Executing Volume from the normal menu ( ■ Prag animation display)

･ Select the desired menu item when other than displaying animations to

display the description of the item’s function.

･ In case of the animation display, in the guide row is not displayed.

O to highlight Settings z o

･ In the simple menu: % to highlight the desired item z o or r

% to highlight Sounds/Vibrate z o

･ You can also select the item using O when in the ■ GLMV Tile display or Animation display.

% to highlight Volume z o

The screen for adjusting the volume is displayed.

Before Using D851iWM

Selecting the menu

Menu item that has been selected

Menu item that cannot be selected (Dimmed)

Lower-level menu exists.

Returning to the stand-by display or previous screen

：Returns to the stand-by display.

% to highlight a menu item and press o or r.

･ You can also select an item by the dial key for the

･ To return to the previous menu: l or c

：Returns to the previous screen.

item number.

Page 38

Before Using D851iWM

Selecting functions from the submenu

When MENU is displayed at the upper left of the guide row, you can use the submenu to perform various operations.

Selecting the menu

Example

Setting each item on the screen

Selecting Yes or No on the confirmation screen

Displaying the Redial submenu

m in the redial list

Item that has been highlighted

Lower-level menu exists

Show that a submenu exists

% to highlight a submenu item z o or r

･ You can select an item by the dial key for the item number. Even for the same function, the item

numbers may differ depending on the screen.

･ To return to the previous menu: l or c ･ To close the submenu: m

% to highlight Yes or No z o

･ For some functions, items other than Yes and No may appear.

Selecting an item from the pulldown menu

% to highlight an item

o to display the pulldown menu z % to highlight an item

･ You can select an item by the dial key for the item number.

Pulldown menu

Page 39

Press o

Selecting an item from the check box

% to highlight a check box z o

The check box changes from to , and is selected.

･ Select the selected item ( ) to cancel the selection ( ). ･ Depending on the function, select/cancel all items by pressing m. ･ You can select an item by the dial key for the item number.

Displaying information quickly Focus Mode

When the icons such as or are displayed on the stand-by display, you can quickly display the information.

o z & to highlight an icon such as or 

･ The number of stored items is displayed at the right of each icon. ･ To cancel Focus Mode: c or f ･ You can also select the icon using % when the or icon,

indicating success or failure respectively of the auto-update of the latest pattern definition, is displayed.

Missed call (unanswered call) exists. Unplayed recorded message exists. Voice mail message exists. Unread received mail exists.

Data updated automatically of the pattern definition exists.

Effective Easy Selector Plus keys

The color of the selected icon changes.

Before Using D851iWM

Selecting the menu

Press o

The screen for the selected icon is displayed.

: The received call list is displayed, letting you check the date and time, the caller

information, etc. : The recorded message list is displayed, letting you play the recorded messages. : The confirmation screen for playing voice mail messages is displayed, letting you play the

messages. : The Inbox folder list is displayed. You can display unread mail.

/ : The data updated automatically of the pattern definition can be checked.

INFORMATION

● When you select an icon and hold down c for over a second, the icon temporarily disappears from the

screen. It reappears when information is viewed and the number of items changes.

Page 40

Before Using D851iWM

Number of saved, registered and protected items in D851iWM

Type

Mail

Received mail*

Sent mail

Unsent mail

Number of saved, registered and protected items in D851iWM

Template*

Message R*

Message F*

Bookmark 100

Screen memo*

Maximum number

of saved/

registered items

1000 500 i-αppli*

200 100 Image*

200 100 Melody*

100

100 50

50 25 Chara-den*

100 50 MobaHO! 500 songs

Maximum

number of

protected items

−

Type

Video/i-motion/ sound recorded with Sound Recorder*

Channel logo*

Maximum number

of saved/

registered items

100 100

1000

500

100

*1 Depending on the size of data, the actual number of items that can be saved and registered may be fewer. *2 The total number of i-mode Mail and SMS. *3 The total number of sent and received SMS. The number of delivery report is not included. *4 Up to 5 items of Message i-

be saved. Depending on the i-

ppli (as part of the 100 items, maximum number of i-αppli that can be saved) can

ppli size, the actual number of items that can be saved may be fewer.

INFORMATION

● Because the data saved in FOMA terminal may be lost due to failure, repair or other handlings of FOMA

terminal, it is recommended that you maintain a separate record of the important data in FOMA terminal. Please note that we are not responsible for any lost data.

● Depending on the function, the displayed file size of data in FOMA terminal may differ slightly.

● If you have a PC, you can use the FOMA D series data link software contained in the attached CD-ROM and

the included USB cable to transfer and save the data such as mail, bookmarks, images, melodies, video/ i-motion to your PC.

Maximum

number of

protected items

−

−SMS in the UIM*

−

Using the UIM (FOMA card)

Use the UIM (FOMA card) to store your phone number and other information. Insert the UIM into FOMA terminal to use it.

For details on handling the UIM, refer to the UIM manual.

･

Inserting/removing the UIM

Use your FOMA terminal with the UIM inserted. If the UIM is not inserted in your FOMA terminal, first insert it.

･ Before inserting or removing the UIM, turn the power off and remove the rear cover and battery pack.

Attaching/removing the rear cover and battery pack ☛P41

･ Insert or remove the UIM with FOMA terminal closed using both hands. Also be careful not to touch

the one-push open button.

Page 41

Inserting the UIM

Tray

Before Using D851iWM

Removing the UIM

a Pull out the cover to the UIM slot.

･ Refer to step a in “Inserting the UIM”.

b Pull out the UIM.

Tra y

Cut corner

UIM

a Pull out the cover to the UIM slot.

Use your fingertip to pull out the

Cut corner

UIM slot cover

cover to the UIM slot until the tray stops.

b Insert the UIM with the IC surface

face down.

c Replace the UIM slot cover in its

original position parallel to the tray.

Be sure to align the grooves in the UIM and the UIM slot cover.

d Push the UIM in until it contacts

the wall of the battery section

If the UIM tray comes out of the FOMA terminal

Reinsert the UIM tray and push it straight in.

● Only perform this

● Exercise due caution as

Using the UIM (FOMA card)

procedure if the UIM tray has come out of the FOMA terminal.

using undue force to install the UIM tray can damage the tray and parts in the FOMA terminal.

INFORMATION

● Insert or remove the UIM carefully as forcing it may damage the card.

● Carefully handle the removed UIM so that it does not become lost.

UIM security codes

The PIN1 and PIN2 codes are used for the UIM. The both codes are set to “0000” at the time of subscription to the FOMA service. You can change this to any code (4 to 8 digits). ☛P142

Page 42

Before Using D851iWM

UIM operation restriction function

FOMA terminal is provided with the UIM operation restriction function for protecting your data and files.

･ When the data or files downloaded from sites or the data attached to mail are saved in FOMA

terminal with the UIM inserted, the UIM operation restriction function is automatically set to these data or files.

･ If the UIM is replaced by another UIM or is removed from FOMA terminal, the data or files with the

UIM operation restriction function set cannot be displayed or played.

･ Data or files with the UIM operation restriction function set cannot be transmitted via infrared

Using the UIM (FOMA card)

communication.

･ The data which is subject to the restriction is as follows:

・Screen memo ・Message R/F ・Image inserted in the Deco-mail text ・File attached to i-mode Mail

ppli (including the i-αppli stand-by display) ・i-motion

・i- ・Image (including animation and Flash movie) ・Chara-den ・Melody ・Recorded message for video-phone ・Movie memo

･ For i-

ppli with the UIM operation restriction set, the following operations are disabled when the UIM

is replaced by another UIM or is removed from FOMA terminal:

・Start ・Displaying the detail information of i- ・Operation setting for i- ・Changing the auto start function ・Setting the i-

ppli ・Automatic start

ppli stand-by display

・Upgrade

INFORMATION

● When the data with the UIM operation restriction function enabled is set for the stand-by display, call image or

ring tone, the settings for the image and sound return to the default if the UIM is replaced by another UIM or is removed from FOMA terminal. In this case, the sound and image that are actually generated/displayed may differ from the settings. Inserting the UIM that was used when the data was downloaded cancels the operation restriction of the data and restores the original settings. (Note that the setting may be canceled if the data was used for Random Display Image.)

● The UIM operation restriction function is not set to the data obtained via infrared communication or data link

software or to the still images videos taken with the built-in camera.

● When the UIM is replaced to the other i-channel compatible terminal, the i-channel information is not displayed

as ticker on the stand-by display. After that, the information is updated automatically or if you press c on the stand-by display to display the channel list, the latest information is received and then displayed as ticker on the stand-by display.

● When the UIM is not inserted, the i-channel information is not displayed as ticker on the stand-by display.

ppli

The settings saved into the UIM

The following settings are saved into the UIM. If the UIM is replaced, the settings saved in the replaced UIM become available.

･ Font type, Keep in SMS center, SMSC, Address and Type of Number of SMS Setting ･ DoCoMo Cert, User Certificate of Certificate Setting ･ My phone number of Own number ･ Select Language ･ The PIN1/PIN2 code of the UIM, PIN1 code ON/OFF

Page 43

Functional differences between the UIM types

There are two types of the UIM: green and blue. The functions differ depending on the type as shown below:

Item UIM (green) UIM (blue) Page

Number of digits of phone number that can be registered in the UIM phonebook

Certificate Download for using FirstPass

WORLD WING service Available Unavailable P41

Service Dialing Number Calling DoCoMo for Repairs and

WORLD WING

WORLD WING is the DoCoMo FOMA international roaming service. By taking out the UIM (green) from the FOMA terminal you normally use and inserting it into FOMA terminal corresponding to the service or an overseas mobile phone (W-CDMA or GSM handset), you can make/receive calls usually in foreign countries with your own mobile phone number.

You can use WORLD WING without subscription.

● If you have not contracted WORLD WING for the FOMA service in the contract before August 31, 2005, a

separate subscription is required to use WORLD WING.

● Some charge plan cannot be used in part.

Up to 26 digits Up to 20 digits P100

Available Unavailable P196

Unavailable P352

DoCoMo for General Inquiries available

･ Connecting to DoCoMo for Repairs

and DoCoMo Information Center

Before Using D851iWM

Attaching/removing the battery pack

･ Turn the power off and close FOMA terminal using both hands before attaching or removing the

battery pack. Also be careful not to touch the one-push open button.

Attaching the battery pack

Press this part

a Remove the rear cover.

While pressing the top of the rear cover with your thumb, slide it in the direction of the arrow until it is removed.

b With the surface with DoCoMo logo and the

recycle mark of the battery pack facing up, insert the battery pack terminal into FOMA terminal at the angle as shown in the figure.

Do not force the battery pack terminal into FOMA terminal. Doing so could damage the battery pack terminal or the body connector.

c Push the battery pack in.

Page 44

Before Using D851iWM

d Place the rear cover plate so that it extends about

2 mm beyond the edge of the FOMA terminal. Then, slide the cover in the direction of the arrow, pushing the center of the cover with your thumb until there is no gap left between the edge of the cover and the terminal.

Failure to follow the correct procedure could damage the rear cover.

Removing the battery pack

Charging the battery of FOMA terminal

a Remove the rear cover. b Lift up the projecting portion of the battery pack and

push in the direction of the auxiliary jack to remove the battery pack.

Battery recycling

FOMA terminal uses a lithium ion battery containing valuable materials that should be recycled. To protect the environment, return used batteries to an NTT DoCoMo service counter, NTT DoCoMo agent or recycling center.

● Please take the following precautions when recycling batteries:

･ Attach a piece of adhesive tape on the terminals of used battery packs ･ Do not disassemble or modify battery packs

INFORMATION

● The FOMA terminal display uses an active LCD. Due to the characteristics of the active LCD, residual images

or crossbar may remain for a while when the battery pack is attached or removed. This is not a fault of FOMA terminal.

Li-ion

Charging the battery of FOMA terminal

When the battery level is low, charge the battery.

The battery level icon shows how much charge remains in the battery. ☛P45

･

Charging time and operation time on full charge (estimates)

Charging

time

Approx.

140 minutes

･ Continuous call time is an estimate of call time for FOMA terminal when it can send or receive signals

normally.

･ Continuous stand-by time is an estimate of operation time of FOMA terminal when it is closed and able

to receive signals normally. The call/stand-by time may be reduced to about half, depending on the amount of charge in the battery, the function settings, the ambient temperature and signal conditions (radio waves do not or hardly reach). Using i-mode communication reduces the call (communication)/ stand-by time. Even if you do not make a call or use i-mode, the call (communication)/stand-by time will be reduced by composing i-mode Mail, or starting downloaded istand-by display, or by using the Audio Functions.

Continuous

call time

During a voice call:

Approx. 170 minutes

During a video-phone

call: Approx. 90 minutes

Continuous

stand-by time

While standing still:

Approx. 420 hours

While moving:

Approx. 320 hours

Continuous

play time

MobaHO!:

Approx. 6 hours

Music:

Approx. 20 hours

ppli software or the i-αppli

Continuous

reception time

MobaHO!:

Approx. 2 hours

FM Radio:

Approx. 25 hours

Page 45

･ Continuous stand-by time (while standing still) is the average operation time of FOMA terminal when it

is standing still, closed and able to receive signals normally.

･

Continuous stand-by time (while moving) is the average operation time of FOMA terminal that is standing still, moving and outside the service area when it is closed and able to receive signals normally.

･ Continuous play time is an estimate of the operation time, the included headphones with built-in

antenna is being used, and the volume is set to level 13 (default setting at the time of purchase).

･ Continuous play time for music playback is based on files saved in the ATRAC3plus format at a bit rate

of 48 kbps.

･ Continuous reception time is an estimate of the operation time of the FOMA terminal when the

included headphones with built-in antenna is being used and the volume is set to level 13 (default setting at the time of purchase).

･ Alternatively, if you perform data communication or Multiaccess, use Camera or play video/i-motion

(including music data), the call (communication)/stand-by time will also be reduced.

Battery pack

● Use the battery pack D07.

● The battery pack is a consumable part and will gradually wear out. Each time it is charged, it will accept

slightly less charge than the previous time. When the battery charge lasts only half as long as when it was new, replace it with a new one. The battery pack’s life is about one year. This life may be shorter depending on the frequency of use.

Starting/ending charging and other items to note

The battery pack can be charged regardless of whether FOMA terminal is turned on or off. However, charging takes longer with the power turned on.

･ When charging starts, the call indicator lights in red.

When FOMA terminal is turned on, the charge alert sounds and the battery level icon blinks.

Charging: Blinks

(

Charged: Lights

・The Battery icon will differ depending upon the Style Theme setting. You can change the displayed

icon. ☛P134

・If the call indicator does not light red at the start of charging or if it flashes red, charging was

unsuccessful. Be especially careful when using functions that consume relatively large amounts of energy such as the Audio Functions, as charging may not be possible if the FOMA terminal is hot. In this case, quit the function(s) being used and attempt the charging operation once again after the FOMA terminal cools off. If the battery pack still cannot be charged even after charging again, contact “Repairs” on the back of this manual.

Icon Call indicator Meaning

)

Charging: Lights in red Charged: Goes off

Charging normally.

･ When charging is completed, the call indicator goes off.

When FOMA terminal is turned on, the charge alert sounds and the battery level icon lights.

・If the battery level icon blinks, charging is not completed.

･ You can set the charge alert not to sound. ☛P120 ･ Do not charge the battery for an extended period (longer than a full day) with FOMA terminal turned

on. FOMA terminal uses power so the adapter continues charging until FOMA terminal is unplugged from the adapter. In such a case, the AC or DC adapter charges again but when FOMA terminal is removed in the middle of charging, the following could occur:

・Low battery level ・Message appears indicating that the battery runs down. ・FOMA terminal is operational for a short time.

･ If the battery is sufficiently charged, connecting FOMA terminal to the AC or DC adapter may not start

charging.

･ If you use FOMA terminal while charging the battery for an extended period with the AC or DC adapter

connected, there is a case where it becomes impossible to charge temporarily by temperature rise.

Before Using D851iWM

Charging the battery of FOMA terminal

Page 46

Before Using D851iWM

Charging the battery of FOMA terminal

･ Insert or remove the connector to/from FOMA terminal slowly and firmly without forcing it. ALWAYS

press the release buttons while removing the connector from the FOMA terminal. Pulling on the connector with undue force can cause damage.

･ Insert or remove the AC adapter connector straight to/from FOMA terminal.

Charging from a wall outlet

Use the FOMA AC adapter 01 (optional) to charge the battery. Also it can be used with the desktop cradle D01 (optional). You can charge the battery with FOMA terminal either closed or open.

･ The battery pack can only be charged when it is attached to FOMA terminal. ･ For details, refer to the manuals for the AC adapter and the desktop cradle.

■ Charging the battery with the AC adapter alone

a Unfold the power plug from the AC

adapter and plug it into a 100 V AC outlet.

b Open the external connection

Call indicator

100 V AC outlet

Power plug

terminal cover of FOMA terminal.

c Insert the AC adapter connector in

Connector ( up)

AC adapter

firmly until it clicks.

d Confirm that charging starts.

Confirm that the call indicator lights red. When charging is completed, remove the

Release button

AC adapter connector from FOMA terminal while pressing the release buttons on both sides of the connector, and unplug the AC adapter from the outlet. Then close the terminal cover.

■ Charging the battery in the desktop cradle

a Unfold the power plug from the AC

adapter and plug it into a 100 V AC outlet.

b Insert the AC adapter connector in the

Call indicator

Power plug

100 V AC outlet

desktop cradle until it clicks.

c Insert the FOMA terminal at an angle,

and sliding it along the back of the desktop cradle, as shown in the figure.

Connector ( up)

Desktop cradle

AC adapter

d Confirm that charging starts.

Confirm that the call indicator lights red. When charging is completed, hold the desktop cradle in one hand, tilt the FOMA terminal forward, and then remove it from the desktop cradle by sliding it up along the back of the cradle.

･ When inserting FOMA terminal into the desktop cradle, be careful not to put a strap in the cradle. ･ When FOMA terminal is not inserted firmly or it leans, the battery is not charged normally. Insert

FOMA terminal.

Charging in a car

Use the FOMA DC adapter 01 (optional) to charge the battery in a car. It can be used with negative ground cars (both 12 V and 24 V).

･ For details, refer to the DC adapter manual.

a Insert the cigarette lighter plug of the DC adapter into the cigarette lighter socket of the car.

Page 47

b Turn off the power of FOMA terminal and open the external connection terminal cover. c Insert the DC adapter connector firmly until it clicks. d Check that charging starts.

When charging is completed, remove the DC adapter connector from FOMA terminal while pressing the release buttons on both sides of the connector, and remove the cigarette lighter plug from the cigarette lighter socket. Then, close the terminal cover.

Before Using D851iWM

Call indicator

Connector ( up)

Release button

Cigarette lighter plug

Cigarette lighter socket

DC adapter

INFORMATION

● If you charge FOMA terminal with the car engine off, the car battery may be discharged. Charge the battery

when the car engine is running.

● When not charging, remove the DC adapter from the cigarette lighter socket.

● The DC adapter fuses (2A) are consumable items. New fuses are available at automotive supply stores.

Checking the remaining battery level Battery Level

The display indicates rough standard of the remaining battery level in 3 levels.

(Remaining battery level 3): Amply charged (Remaining battery level 2): Charging is decreased.

Battery level icon

Checking the remaining battery level by sound and display

(Remaining battery level 1): Recharging recommended

･ The battery icon will differ depending upon the Style Theme setting. It is

also possible to change the displayed icon. ☛P134

Battery Level

m843

(Level 3)

Sounds 3 times.

(Level 2)

Sounds twice.

(Level 1)

The remaining battery level is displayed. The confirmation sound rings by the sound set in Keypad Sound.

Sounds once.

When the battery almost runs down

A message appears or a low battery alert sounds to indicate that the battery level is low. Charging the battery stops the low battery alert. If you want to stop it immediately, press f.

Page 48

Before Using D851iWM

･ In stand-by, a message indicating low battery appears. The message disappears by pressing o,

but after a period of time, it reappears and the low battery alert sounds. At this time, all the icons on the top of the screen blink and after approximately one minute, the power turns off automatically.

･ During a call, the low battery alert sounds from the earpiece and a message indicating low battery

appears. The message disappears by pressing o, c or f. When approximately 20 seconds elapses after the low battery alert is heard, the call is cut off and the stand-by display reappears. Then, after approximately one minute, the power turns off automatically.

Setting the low battery alert not to sound Low Battery Alert

Power ON/OFF

Default ON

m815

Press 2

･ To set the alert: 1

INFORMATION

● When the battery almost runs down during a call, even if OFF is set, the low battery alert sounds from the

earpiece.

Turning the power on/off Power ON/OFF

･ If the power is turned on for the first time, a confirmation screen is displayed asking whether to

perform Software Update. Note that the battery needs to be charged enough when performing. Please be sure to refer to “Updating Software” before performing. ☛P405

Turning the power on

f (for over 2 seconds)

The wake-up screen appears and then the stand-by display is displayed. Displaying the wake-up screen may take some time.

･ If Quick Start-up is set to ON, the time until the stand-by display is displayed becomes short.

Battery level icon

Received

signal level

Date/day/time

The stand-by image is displayed.

is indicated while reading the UIM and disappears when reading is completed.

Display of received signal level

Status

･ If the date and time have not been set, a message

indicating that is displayed. Press o to set the date and time.

･ If no UIM is inserted, a message indicating that insertion

of the UIM is required is displayed. Turn the power off, insert the UIM and then turn the power back on.

･ When PIN1 Code ON/OFF is set to ON, enter the PIN1

code.

･ The following items can be changed:

･ Stand-by image ☛P122 ･ Battery level icon ☛P134 ･ Display format of the time ☛P136

Strong

Medium

Weak

Outside the service area and where radio waves are hard to reach

Page 49

Turning the power off

f (for over 2 seconds)

INFORMATION

● Calls may be cut off even when is indicated and you are not moving.

● When Reset Call Cost is set to ON, entry of the PIN2 code is required.

● In the following cases, if you do not press any keys for about 90 seconds, the display disappears (except while

shooting with the camera, etc.). It is the same also during a voice call. The display appears again if there is any key operation or incoming call.

･ When Turn light on is set to other than Always in Display Light Setting ･ During charging (when Turn light on is set to other than Always, and AC adapter connected is set to Terminal

settings in Display Light setting)

Switching to English display Select Language

Default Japanese

m8272

Press 2

･ To switch to Japanese display: 1

INFORMATION

● The setting information is saved to the UIM.

Before Using D851iWM

Select Language

Setting the date and time Date and Time Setting

The time setting can be performed in two ways: obtaining the time information from DoCoMo network to adjust the time setting of your FOMA terminal, or manually entering the current time to your terminal.

Default Auto time adjust: ON Offset: +,00h00m

m851

Select each item to set

Auto time adjust：Set whether to perform the automatic time correction.

Offset ：Specify the amount of time advance (+) or delay (-) so that your terminal’s clock

･ When you set Auto time adjust to ON, Offset can be set. Date and Time

cannot be set.

･ To enter the date and time manually, set Auto time adjust to OFF.

advances from/delays to the time obtained for a given length of time.

･ Enter the time between 00h00m and 23h59m. ･ Prefix 0 if the time and/or minute is single digit (0 to 9).

Page 50

Before Using D851iWM

Date, Time ：Set the date and time.

･ Enter the year by the last 2 digits of the year. From January 1, 2000 to

December 31, 2050 can be set.

･ Enter the time in the 24-hour clock (00h00m - 23h59m). ･ Prefix 0 if the month, date, time and/or minute is single digit (0 to 9).

･ The entered numbers can also be increased or decreased by %. Also, & to highlight the

number to change to enter it.

Press p

Date and Time Setting

When automatic time correction is set

The automatic time correction takes place when the UIM is inserted and you turn the power on in a location where radio waves reach.

･ The automatic time correction sometimes causes a time error of several seconds. In addition, it may

fail to correct the time depending on the radio wave condition.

･ Even if the time information is received while i-

corrected depending on i-

ppli.

ppli is running, the time may not be able to be

･ When Auto time adjust is set to ON, the time may not be corrected for a while. To enable the

automatic time correction, turn the power off and then on.

･ When no UIM is inserted or the FOMA terminal is out of the service area, the automatic time

correction is not performed even if you turn the power off and then on.

･ Time correction will not be implemented if you receive time information while listening to MobaHO!.

INFORMATION

● You cannot use the following functions when the date and time are not set:

･ Random Display Image (When the timing switch is set to other than Open slide）･ Auto Power ON/OFF ･ Alarm Clock

･ Scheduler ･ Certificate Download ☛P196 ･ i-

ppli auto start function ☛P253 ･ i-αppli DX requiring the time setting ☛P246

･ Downloading i-motion with replay restrictions set ☛P298 ･ Data (schedule) transfer ☛P312, P313 ･ Software Update ･ Update Definition ･ SSL communication (authentication) ･ MobaHO! reception ･ MobaHO! programs

● If the date and time are not set, the date and time are not recorded for the following functions and

“----/--/--” or “----------------” is displayed.

･ Redial/Received Calls ･ Answer Machine/Voice Memo ･ Notepad ･ Date and time of the still image/video shot with the camera ☛P160 ･ Date and time of sent mail/unsent mail ☛P225 ･ Date and time of downloaded i- ･ Date and time the still image, melody, Chara-den, i-motion or mail template was saved or recorded ☛P309,

P215

● The set time is retained even when the battery pack is replaced, but may be reset if the battery pack is

removed for an extended period. In that case, set the date and time again.

● When Reset Call Cost is set to ON, entry of the terminal security code is required.

ppli (details) ☛P250

Page 51

Notifying your phone number to the other party Caller ID Notification

Set FOMA terminal to send your phone number (caller ID) to be displayed on the other party’s phone every time you make a call.

･

The caller ID is your important information. Carefully consider whether to send your caller ID.

･ The caller ID is displayed only when the other party’s phone can display the caller ID. ･ Caller ID Notification cannot be set in a location outside the service area. Set it in a location with

good radio wave condition.

･ For details, see “Network Services User’s Guide”.

m951

･ To check the current setting: m952 z Select Yes

Enter the network security code z 1

･ The network security code entered is masked with “ ･ To hide the caller ID: 2

INFORMATION

● You can use the following ways to show/hide the caller ID.

･ Setting to show/hide the caller ID for each phonebook entry ☛P111 ･ Setting to show/hide the caller ID when making a call ☛P57

● If you hear a guidance to request to show your caller ID when you make a call, call back after setting FOMA

terminal to send your caller ID.

● When setting/operating the multiple caller ID notification methods at the same time, the caller ID is notified in

the following priority. However, the setting of showing/hiding the caller ID shown on the display may be different from the actual setting.

When you set the caller ID notification method in the dialing condition when making a call ☛P58

When “186”/“184” is appended before the other party’s phone number

When Caller ID Setting is set to the phonebook data

When Caller ID Notification is set

＊

”.

Before Using D851iWM

Caller ID Notification

Menu 47

Checking your own phone number Own Number

Check your phone number (My phone number), name, mail address, etc.

Default My phone number: Phone number by default Other than that: Not recorded

･ The phone number of the UIM inserted in FOMA terminal is displayed for My phone number. ･ To check your i-mode Mail address: d1 to display iMenu z Select English → d Options →

a Mail Settings → Confirm Mail Address

INFORMATION

● To check your phone number during a call: b0

Page 52

MEMO

Page 53

Making/Receiving Calls

Making calls

Making calls ......................................................................................................52

Switching from a voice call to a video-phone call..........................................55

Calling back previously called numbers ........................................... Redial 56

Setting whether to send your phone number for each call ... 186/184 Call 57

Making calls by setting the conditions .......................................................... 58

Using international calls ........................................................ WORLD CALL 59

Making a call by specifying a sub-address ............................ Sub Address 60

Setting the alarm indicating reconnection of the interrupted call

............................................................................................ Reconnect Alarm 61

Suppressing ambient noises to improve the call quality

............................................................................................. Noise Reduction 61

Talking without using hands in a car ............................... In-car Handsfree 61

Receiving calls

Receiving calls ..................................................................................................62

Receiving a call by switching from a voice call to a video-phone call ........64

Enabling use of dial keys to answer a call ...................... Any Key Answer 64

Setting to start talking by opening FOMA terminal .............. Open Answer 65

Disconnecting/continuing/holding a call by closing FOMA terminal

................................................................................................... Close Setting 65

Using Received Calls ........................................................... Received Calls 66

Adjusting the volume of the caller’s voice ......................... Volume Setting 67

Adjusting the ring volume .......................................... Ring Volume Setting 68

Setting operations for incoming voice/video-phone calls

..........................................

Setting the priority screen for incoming calls during a call or packet

communication ............................................................ Priority Comm Mode 70

When you can/could not answer a call

Putting incoming calls on hold when you cannot answer right away

......................................................................................... Response and Hold 70

Setting a response hold guidance ..................................... Status Message 71

Setting an on-hold tone .......................................................... On-hold Tone 72

Using Public mode (Driving mode) ............... Public mode (Driving mode) 72

Using Public mode (power off) ....................................................................... 73

Allowing the caller to leave message when you cannot answer the call

.............................................................................................. Answer Machine 75

Incoming Call Setting/Incoming Videophone Setting

Page 54

Making calls

Making/Receiving Calls

Making calls

The procedures for those operations common to voice and video-phone calls are explained here.

Do not cover the built-in antenna with your hands during a call.

･･ It is not possible to make phone calls, except for emergency calls (110, 119 or 118), while recording

a MobaHO! broadcast.

Enter a phone number

Calling general subscriber phone

Calling mobile phone 090 - XXXX - XXXX, 080 - XXXX - XXXX

Calling PHS phone 070 - XXXX - XXXX

･ You can enter up to 80 digits for the phone number. However, only 24

digits are displayed.

･ To correct the phone number: c ･ To return to the stand-by display: c (for over a second)

You will hear a dial tone. You can start talking when the call is answered.

･ If the phone of the other party is busy, you will hear a busy signal. Press

f to end the call and make a call again later. You can call back quickly using Redial.

･ If the power of the other party’s mobile phone or PHS is turned off or the

other party is in an area where radio waves are hard to reach, a guidance informs that the connection is unavailable.

Always include the area code even when calling from the same city.

f when you finish the call

･ To end the call by closing FOMA terminal, change the setting in Close Setting.

INFORMATION

● You can also make a call in order of Step 2, Step 1. A voice call will be made automatically about 5 seconds

after you have pressed n and entered the phone number.

● If a guidance to request your caller ID is heard when a call is made, call again after you have set FOMA

terminal to send your caller ID.

● When you subscribe to Multi Number, you can call by specifying a registered multi number. ☛P353

Page 55

Putting calls on hold while talking On-hold

Putting the call on hold while talking allows you to talk without the caller hearing your voice.

･ Callers are charged for the time spent on hold.

o during a call

Flashes

The call is put on hold and a guidance (onhold tone) is played. For video-phone calls, the on-hold image is displayed on your and the other party’s terminals.

On-hold image

Making/Receiving Calls

Making calls

On-hold during a

voice call

･ Press o or n while a voice call is on hold to cancel the hold. ･ Press o while a video-phone call is on hold to cancel the hold and send the image that has been

sent before the hold. Press t or n to cancel the hold and send your image to the other party and press a to cancel the hold and send a substitute image.

INFORMATION

● To put the call on hold by closing FOMA terminal, change the setting in Close Setting.

On-hold during a video-phone call

Using the speakerphone function

You can make a call allowing the voice of the other party to be heard from the speaker.

Enter a phone number z n (for over a second)

･ Making a video-phone call: t

To make a video-phone call with the speakerphone function on when Speakerphone is set to OFF in Videophone Settings, press t for over a second.

･ When you make a video-phone call, the speakerphone function is automatically turned on. To

make a video-phone call without turning on the speakerphone function, change the setting in Videophone Settings.

･ You can turn on/off the speakerphone function by pressing n while dialing or the phone is

ringing, or by pressing a or n during a call.

･ is displayed while the speakerphone function is on. ･ The operation is the same as when operating from the phonebook, redial, received call, recorded

message and voice memo lists.

･ The speaker volume can be adjusted during voice calls by pressing % and then O, and during

video-phone calls by pressing m7 and then %. This setting will be saved even after the call and will also be reflected in the playback volume of video-phone call recorded messages.

INFORMATION

● When the speakerphone function is turned on, the volume may suddenly increase and damage your ears, so

use it with FOMA terminal away from your ears.

● If a call is hard to hear with a large amount of noise around you or the other party, turn off the speakerphone

function.

● Talk to FOMA terminal within about 30 cm.

Page 56

● When the included remote controller with microphone, a flat type earphone/microphone set with switch

(optional) or the In-Car Hands-Free Kit 01 (optional) is connected to FOMA terminal, use the connected device

Making/Receiving Calls

to communicate.

● The speakerphone function can be used even when Silent Mode is on.

Operation during voice calls

The following operations can be performed from the submenu:

Submenu item Description Page

Switch to V-phone Switches from a voice call to a video-phone call. P55

Making calls

Received calls Displays received calls. P66

Redial Displays redials. P56

Set time Sets the date and time. P47

Reconnect alarm*

Quality alarm*

Terminal close Sets the operations (whether the call is disconnected, continued or held)

Dial up Allows making a call to another party during a call using Call Waiting Service. P350

Volume Adjusts the earpiece volume. P68

*1 The setting can be changed while an alarm sounds. It becomes effective when the alarm is stopped.

Allows setting an alarm sound indicating reconnection of a call under improved signal quality which has been cut off due to poor signal quality.

Sets whether to sound an alarm when your call is about to be cut off due to poor signal quality.

when FOMA terminal is closed during a call.

･The following key operations are available during a call:

・%: Adjust the volume ・l: Display received calls ・r: Display redials ・t : Activate Camera ・p: Start the phonebook ・C (for over a second): Record the other party’s voice (Talking Voice Memo)

P61

P120

P65

Entering pauses or timed pauses

Pauses and timed pauses apply only to voice calls.

Example

Calling to “03XXXXXXXXP12345” (P=Entered pause)

When you press o after the call is connected, the numbers after the pause are dialed.

Page 57

Entering a pause “P”

A pause (P) is used for sending messages to beepers*, operating the answering system at home, reserving tickets, etc. At the point the pause (P) is entered, the dial digits are separated and a tone signal (DTMF) is sent.

( (for over a second)

･ You cannot make a call if a pause is entered at the beginning of the phone number.

Entering a timed pause “T”

A timed pause (T) is used to dial outside line numbers with extensions. Enter “T” between the outside line and extension number to dial the extension number after a set number of seconds following the outside line number.

# (for over a second)

･ Timed pauses can be entered in succession. ･ Each timed pause is followed by a second interval. ･ You cannot make a call if a timed pause is entered at the beginning of the phone number.

INFORMATION

● Tone signals (DTMF) may not be received depending on the receiving device.

● You cannot make a call to another party by putting the current call on hold and entering a pause (P) or timed

pause (T).

● When it is necessary to send tone signals (DTMF) following voice prompts as in making ticket reservations, the

speakerphone function is useful. In this case, input tone signals (DTMF) after switching to the speakerphone.

Making/Receiving Calls

Switching from a voice call to a video-phone call

You can switch to a video-phone call by operating from the submenu during a voice call when the other terminal is compatible with switching calls. Switching can be performed only from the terminal which made the voice call.

･

This operation can be performed between the terminals that support switching between voice call/ video-phone call.

･ To switch to a video-phone call, the other party needs to set Indication ON of Notify Switchable Mode

in advance. ☛P92

m1 during a voice call z Select YES

･ A guidance informing that the call is switched is played during switching. ･ Select NO to return to the voice call talking screen. ･ When Speakerphone is set to ON in Videophone Settings, the speakerphone function is

automatically turned on when the call is switched to a video-phone call.

* From January 2001, the DoCoMo display beeper name has changed to “QUICKCAST”.

Page 58

INFORMATION

● During packet communication, disconnect the packet communication and switch to a video-phone call.

Making/Receiving Calls

● When the other party is during packet communication, the call cannot be switched to a video-phone call.

● While talking on the phone using Call Waiting Service, you cannot switch the call to a video-phone call.

● It takes about 5 seconds to switch. In addition, it may take time to switch depending on radio wave conditions.

● Depending on radio wave conditions, a voice call may not be switched to a video-phone call or may be

disconnected.

● A second call received while switching calls is rejected.

● The speakerphone function is turned off every time a voice call and video-phone call are switched.

● The settings (such as selecting the frame) during a video-phone call are canceled every time a voice call and

video-phone call are switched.

● Call charges are calculated for the voice and video-phone portions of all calls according to their respective

Redial

durations.

● The call is not charged while Modifying is displayed.

● Switching from a video-phone call to a voice call ☛P83

Calling back previously called numbers Redial

This function records the calls that you made as dialed calls (Redial). When the other party is busy, etc., you can redial by simple operation.

Up to 30 calls are recorded. When the number exceeds 30, the oldest one is deleted chronologically.

･

r z Highlight a party in the redial list

Phone number, name*1

: Call with the caller ID set to show : Call with the caller ID set to hide

Menu 45

Date and time of dialing, phone number, image*2 of the highlighted party Multi number specified*

: Video-phone call : International call

*1 When the phone number is registered in the phonebook (While not in Secret Mode, the phone numbers

you dialed are displayed in the redial data even if they are registered in the phonebook with Secret

Attribute.) *2 When the image is registered in the phonebook *3 When you subscribe to the Multi Number service (the name of Basic Number or Additional Number

specified for the call)

･ To switch between the redial/received call list: p

■ Registering an entry in the phonebook:

a Highlight a redial z m1

･ To add to an existing phonebook entry: m2

b 1 or 2 z Register the name or address ☛P97, P100

･ To add to an existing phonebook entry: 1 or 2 z Select an entry z Revise

registered information ☛P108

Page 59

■ Composing SMS: Highlight a redial z a (for over a second)

The SMS composition screen with the redial phone number specified as the address is displayed.

･ If the redial phone number is saved in the phonebook together with mail addresses, pressing

a displays the i-mode Mail composition screen with the first mail address specified as the address. If not, the mail composition screen is displayed with the redial phone number specified as the address.

･ If the destination is registered in the phonebook, the name registered in the phonebook will

appear in the field.

Press n

A voice call is made.

･ To make a video-phone call: t ･ To make a call with the same call type as the highlighted redial: o

・ The redial dialed by 32K video-phone call is dialed by 64K video-phone call.

INFORMATION

● You can make calls by setting conditions. ☛P58

● When you switch between a voice call and video-phone call during a call, the call type (voice call/video-phone

call) that was specified when you dialed will be recorded in the redial data.

● When the date and time have not been set, the date and time are not recorded in the redial data.

● When the same number is dialed, only the most recent call is recorded for each caller ID preference: show,

hide or no setting.

● Selecting a multi number registered for Multi Number ☛P353

Deleting redials Delete Redial

Highlight a redial z m41

･ To delete all: m42

Making/Receiving Calls

186/184 Call

Select Yes

Setting whether to send your phone number for each call

Set whether to make your phone number (caller ID) to be displayed on the other party’s terminal when you make a call.

･

The caller ID is your important information. Carefully consider whether to send your caller ID.

･ The caller ID is displayed only when the other party’s terminal has the ability to display caller ID.

186/184 Call

Making calls by adding “186”/“184” to the phone numbers

Prefix a specific number to the beginning of the phone number when you make a call.

■ Showing your caller ID: 186 z Enter the other party’s phone number z n (for

voice call) or t (for video-phone call)

■ Hiding your caller ID: 184 z Enter the other party’s phone number z n (for voice

call) or t (for video-phone call)

Page 60

INFORMATION

● If a guidance to request your caller ID is heard when you make a call, call again by adding “186”.

Making/Receiving Calls

● When making an international call, the caller ID may not be notified depending on the going phone company

even if “186” is added.

● When making a call by adding “186”/“184” to the other party’s phone number, the phone number with “186”/

“184” added is recorded in the redial data.

● Caller ID notification priority ☛P49

Making calls by setting the conditions

This function allows you to select the call type, show/hide your caller ID, select a multi number and append a prefix for each voice/video-phone call.

Enter a phone number z m3

･ The operation is the same as when operating from the list of recorded messages or voice memos.

Select each item to set the dialing conditions

Call Type：Select from Voice call, 64K V.phone or 32K V.phone. Caller ID ：Set to show/hide caller ID.

･ Caller ID notification priority ☛P49

Multi No.：Select the number that will be sent as you caller ID from between the Basic Number

and Additional Numbers. ☛P353

Prefix ：Select the number (prefix) appended before the phone number.

･ Prefix ☛P60

m z Select Yes

A call is made by the settings.

･ When you select 64K V.phone or 32K V.phone in Call Type, you can select Chara-den call to select

Chara-den to be displayed during a video-phone call.

INFORMATION

● In the redial list, the received call list, the list/details (TOP/Phone) screen of FOMA terminal phonebook, the list/

details screen of UIM phonebook, the details screen of Own Number or the member list screen for schedule, press m and select Call or Phone/Msg → Call.

● In case of international call, the caller ID may not be notified depending on the going phone company even

when Notify is selected for Caller ID.

Page 61

Using international calls WORLD CALL

DoCoMo international call service “WORLD CALL”

･ The international call service “WORLD CALL” is available for DoCoMo mobile phones. ･ How to call

009130 z 010 z Enter the other party’s country code z area code z phone number z n

･ The above phone number can be registered in the FOMA terminal phonebook. ･ When the area code begins with “0”, dial without “0”. (When calling to a general subscriber phone

and other phones in Italy, you need to dial “0”.)

･ You can call to approximately 220 countries and regions around the world. ･ WORLD CALL charges are added to the FOMA service charges every month. ･ No subscription charges or monthly fee is required.

・You were subscribed to “WORLD CALL” as one of standard services at the time of subscription to

the FOMA service (unless you request not to subscribe to it).

･ Changes in international call dial procedure

MY LINE service is not applicable to mobile telephone communications, including WORLD CALL service. However, along with the introduction of MY LINE service, the dialing procedure for international communications using a mobile telephone was changed. Consequently, the previous dial procedure (without prefix “010”) no longer be used.

･ Contact “General Inquiries” on the back of this manual for details.

・To use international call services other than the DoCoMo service, contact each carrier for details.

･ Some billing plans are not available.

“International video-phone” calls to parties using specific overseas 3G mobile phone terminals can be made by dialing as described above and placing a call in the video-phone mode.

･ For the countries and overseas carriers you can connect to, visit the DoCoMo website. ･ The image of the other party displayed on FOMA terminal may be distorted or connection may not be

established depending on the terminal at the other end of the international video-phone line.

Making/Receiving Calls

WORLD CALL

Using “WORLD CALL” by simplified dialing Auto Assist Setting

When Auto is set for this setting, entering “+” followed by a country code and phone number makes an international call easily by automatically appending “009130010” for international call.

･ If “+” is prefixed to dial followed by the country code of Japan “81”, “009130010” for international call

is not appended even when Auto is set for this setting.

Default Auto

m8683

Press 1

･ To cancel the setting: 2

■ Making a call using Auto Assist Setting: 0 (for over a second) z Enter a country code

z phone number z n

Page 62

Setting numbers other than “WORLD CALL” Prefix

Making/Receiving Calls

Sub Address

By registering a number to add to the beginning of the phone number (prefix) in advance, you can add a prefix even after entering the phone number to make an international call easily.

･ The default setting is “009130010” for international calls.

Default 009130010

m8682

Select Prefix1 to 3 field z Enter a number

･ Up to 3 numbers in total and up to 10 digits for each number can be entered. ･ Do not include a pause or timed pause in the number (prefix). If you set a prefix containing a

pause or timed pause, you cannot add the prefix when making a call.

･ “009130010” can be changed to another prefix.

Press p

■ Selecting a prefix when making a call:

a Enter a country code z phone number b m3 z Select Prefix field c Select a prefix number d m z Select Yes

Making a call by specifying a sub-address Sub Address

Specify a sub-address to call a specific phone or communication device.

This setting is also used to select the contents in a video delivery service, “V-Live”.

･

Default ON

m8684

Press 1

･ To cancel the setting: 2

■ Making a call by specifying a sub-address: Enter a phone number z ( z Enter a sub-

address z n (for a voice call) or t (for a video-phone call)

･ The sub-address needs to be set for the other party’s terminal or communication device.

INFORMATION

● Even when Sub Address is ON, if “ ” is entered after entering a pause, timed pause or “#”, it is not recognized

as a sub-address delimiter and sent as tone signals (DTMF) containing “ ”.

Page 63

Setting the alarm indicating reconnection of the interrupted call

Set an alarm that is heard at the time of reconnecting a voice call or video-phone call interrupted by poor signal conditions in a tunnel or behind a building when signal conditions improve.

･

The other party’s voice is not heard while signals are disrupted.

･ The time until the call is reconnected depends on line use or signal conditions. (The approximate

time is a maximum of 10 seconds.)

･ Note that the call is charged for the time until the call is reconnected (up to 10 seconds). ･ The call may be cut off before the alarm sounds depending on line use or signal conditions.

Default High alarm

m8692 z 1 to 3

Reconnect Alarm

Suppressing ambient noises to improve the call quality Noise Reduction

By suppressing ambient noises during a call, the other party can hear your voice clearly and you can also hear the other party’s voice clearly.

･

It is recommended that this function be usually set to ON.

Default ON

m8691

Press 1

･ To cancel the setting: 2

Making/Receiving Calls

Reconnect Alarm

Talking without using hands in a car In-car Handsfree

You can make and receive voice calls from a handsfree compatible device by connecting FOMA terminal via USB to such device as the In-Car Hands-Free Kit 01 (optional) or car navigation system.

･

For operations of handsfree devices, refer to the instruction manual for each handsfree device. Note that the FOMA In-Car Hands-Free Cable 01 (optional) is required to use the In-Car Hands-Free Kit 01 (optional).

INFORMATION

● The display and ring tone for incoming calls follow the FOMA terminal settings.

● If the setting is made to play sounds from a handsfree device, the ring tone sounds from a handsfree device

regardless of whether Silent Mode is on or the ring tone settings on FOMA terminal.

● The operation during incoming calls in Public mode (Driving mode) follows the Public mode (Driving mode)

settings.

● If a video-phone call is made from a handsfree compatible device using the phonebook or redial data, the

communication speed set from the handsfree compatible device is used. If it is not set, the video-phone call is made at fixed 64K.

● When a video-phone call is made/received from a handsfree compatible device, a substitute image is sent to

the other party.

Page 64

● The operation during incoming calls when Answer Machine is set follows the Answer Machine settings.

● If the setting is made to play sounds from FOMA terminal, the operation when FOMA terminal is closed during

Making/Receiving Calls

a call follows Close Setting. If the setting is made to play sounds from a handsfree device, the call continues even if FOMA terminal is closed, regardless of Close Setting.

Receiving calls

The procedures for those operations common to voice and video-phone calls are explained here.

･

For voice calls, calls can also be answered by pressing 0 to 9, (, and # other than n

Receiving calls

(Any Key Answer). ☛P64

A call is received

The ring tone sounds, the display light turns on and the call indicator lights/flashes.

･ To put the call on hold (Response and Hold): f

You can talk. The call duration is displayed.

･ To put the call on hold (On-hold): o ･ To turn on the speakerphone function: a or n ･ You can also answer the call by opening FOMA terminal. ☛P65

f when you finish the call

･ To end the call by closing FOMA terminal, change the setting in Close Setting.

Display information

The caller’s phone number, name, image or video/i-motion will be displayed on the screen according to the dialing condition of the caller and the FOMA terminal settings. The name or phone number can be set not to be displayed. ☛P131

■ When the other party has sent their caller ID

When the phone number of the other party is not registered in your phonebook, only the phone number and the image set in Incoming Call Setting or Incoming Videophone Setting will be displayed.

Page 65

If the phone number of the other party is already registered in your phonebook, the name and phone number are displayed. In addition, when Contact Image is ON, the image or video/i-motion set in the phonebook is also displayed. ☛P130

■ When the other party’s caller ID is not notified

The reason why no caller ID is sent is displayed.



Reason for no

caller ID

User unset The caller selected not to send the caller ID.

Payphone The call was made from a payphone, etc.

Not support The call was made from a party who cannot send caller ID,

such as a call from overseas or from a general subscriber phone via forwarding service (however, caller ID may be displayed depending on connecting phone companies.)

Description

When a voice call arrives, an incoming operation or image set in Anonymous Caller is prioritized. When a video-phone call comes in, the incoming image will depend upon the Incoming Videophone setting.

Operations while receiving calls

When there is an incoming voice call, you can perform the following operations from the submenu. (When you set Arrival Call Act to Answer, the same operation can also work when there is another incoming call during a call.)

Submenu item Description

a Call Rejection Disconnects the call (the caller does not pay for the call). b Voice Mail* c Call Forwarding*

* 1 Valid when you use Voice Mail Service and have received a voice call. * 2 Valid when you use Call Forwarding Service and have set a forwarding phone number.

Connects the incoming call to the Voice Mail Service Center.

Forwards the incoming call to the forwarding phone number.

･ C (for over a second): Answer by Answer Machine (Quick Record Message) ･ C: Stop the ring tone/vibrator ･ % : Adjust the ring volume

Making/Receiving Calls

Receiving calls

When you hear beeps (call waiting ring tone) while talking

If you subscribe to Voice Mail, Call Waiting or Call Forwarding Service, you will hear beeps (call waiting ring tone) when you receive another incoming call while talking and the following operations can be performed:

Service Operation Page

Voice Mail Service*

Call Waiting Service Puts the current call on hold and answers the second call. P349

Call Forwarding Service*

*1 You can also perform this operation from the submenu if you have turned on the Arrival Act setting and

selected Answer under the Arrival Call Act setting.

Connects the incoming call to the Voice Mail Service Center. P348

Forwards the incoming call to the forwarding phone number. P350

･ If you do not subscribe to Call Waiting Service, you cannot answer calls even if you hear beeps.

Page 66

INFORMATION

● When a call forwarded from FOMA terminal arrives, the phone number from which it was forwarded is

Making/Receiving Calls

Any Key Answer

displayed if it is not registered in the phonebook. If it is registered, the name is displayed. However, the phone number or name may not be displayed depending on the forwarding source.

● Even if video/i-motion is set to the image for incoming calls in the phonebook or Incoming Call Setting, it is not

played and the first frame of the video/i-motion is displayed when there is an incoming voice call during a voice call.

● When you receive an international call, a plus sign (+) appears at the beginning of the caller ID.

● If a call is received while you are playing music with the Music Player, playback will be paused.

● If a call is received while you are listening to the FM Radio, reception will be paused.

● For calls received from callers not registered in the phonebook, you can reject calls, or set the ring tone or

vibrator ringer action not to start immediately. ☛P154, P153

● Call rejection can be set for some parties registered in the phonebook. ☛P151

Receiving a call by switching from a voice call to a video-phone call

･ The switching operation can be performed only from the side which made the voice call. It cannot be

performed from the side which received the voice call.

･ To receive the request of switching to a video-phone call, set Indication ON of Notify Switchable

Mode. ☛P92

Receive the request of switching to a video-phone call during a voice call

･ A guidance informing that the call is switched is

played during switching.

Select YES

The call is switched to a video-phone call and your self image is sent to the other party.

･ To send the substitute image to the other party: Select NO ･ When you select YES, your self image is sent for the first time.

Enabling use of dial keys to answer a call Any Key Answer

Allows you to answer a call by pressing 0 to 9, ( or # other than n.

This function is available for voice calls. However, it is unavailable when receiving a call while talking.

･

Default ON

m865

Press 1

･ To cancel the setting: 2

Page 67

Setting to start talking by opening FOMA terminal Open Answer

･ This function is available only for voice calls (available even while Key Lock is on).

Default OFF

m8685

Press 1

･ To cancel the setting: 2

Making/Receiving Calls

Open Answer

Disconnecting/continuing/holding a call by closing FOMA terminal

･ This function does not operate during 64K data communication or packet communication.

Default Continue

m8695

1 to 3

End the call : Ends the call. Continue : Continues the call. On hold : Puts the call on hold. The other party hears a guidance (on-hold tone).

INFORMATION

● When On hold is set, the operations are as follows:

･ If you close the FOMA terminal during a video-phone call while sending a still image or your image with frame

on it, the still image or frame will be canceled after the hold is released.

･ If you close the FOMA terminal during tone signal (DTMF) batch transmission, such as sending tone signals

after pressing Pause (P), the call will remain connected.

･ If you close the FOMA terminal while switching between a voice call and video-phone call, the call will remain

connected.

● When you close the FOMA terminal during a call using the included remote controller with microphone, a flat

type earphone/microphone set with switch (optional) or other handsfree compatible devices (available in market) connected, the call continues regardless of this function’s setting if the settings is made to play sounds from the connected device. Even if you remove the included remote controller with microphone, the flat type earphone/microphone set with switch (optional) or handsfree compatible device in this state, the call will continue.

● When you close the FOMA terminal while recording a message, the recording is continued regardless of this

setting.

● This setting is applied when FOMA terminal is closed while recording a talking voice memo/movie memo.

When On hold is set, the contents which were being recorded by just before putting on hold are saved.

● When Continue is set, the same image will be sent even if you close the FOMA terminal.

Close Setting

Page 68

Menu 44

Making/Receiving Calls

Using Received Calls Received Calls

The calls that you received, and unanswered calls (missed calls) are recorded in memory. Recorded messages are also included in the list.

･

Up to 30 calls are recorded. When the number exceeds 30, the oldest one is deleted chronologically.

Example

Received Calls

Making a call from the received call history

l z Highlight a received call in the list

Phone number, name*1, reason for no caller ID ☛P63 Date and time of receiving, phone number (the ringing time is also displayed for

missed calls), image* Multi number specified*

: Received video-phone call : Received 64K data communication

: Received international call

: Missed call (unread) : Recorded message exists : Missed call (read) : Recorded message is deleted

*1 When the phone number is registered in the phonebook *2 When the image is registered in the phonebook *3 When you subscribe to the Multi Number service (the name of Basic Number or Additional Number

specified for the received call)

･ To switch between the received call/redial list: p

■ Registering an entry in the phonebook:

a Highlight a received call z m1

･ To add to an existing phonebook entry: m2

b 1 or 2 z Register the name or address ☛P97, P100

･ To add to an existing phonebook entry: 1 or 2 z Select an entry z Revise

registered information ☛P108

■ Composing SMS: Highlight a received call z a (for over a second)

The SMS composition screen with the phone number of the received call specified as the address appears.

･ If the phone number of the received call is registered in the phonebook together with the mail

address, pressing a displays the i-mode Mail composition screen with the first mail address specified as the address. If not, the mail composition screen is displayed with the phone number of the received call specified as the address.

of the highlighted party

n or t

･ To make a call with the same call type as the highlighted received call: o

Page 69

Unanswered calls (missed calls)

(with the number of missed calls) is indicated and the call is recorded in the received call

history. ☛P37

･ When Indicator light in Alert Lighting Setting is set to ON, the call indicator flashes until the received

calls are displayed.

･ When there is a missed call from an unknown phone number, the ringing time enables you to check

whether the call is a malicious call (One-Ring Call, etc.) made for the sole purpose of leaving the phone number in the received call history.

INFORMATION

● Press m53 on the received call list to display the missed calls within the delay time set in Mute Ring

Time Setting. To display missed calls after the designated delay time, press m52, and to display all the received calls, press m51.

● You can make calls by setting conditions.

● If only missed calls within the delay time set in Mute Ring Time Setting are recorded as received calls, pressing

l on the stand-by display displays a confirmation screen notifying you of received calls not displayed. When

Yes is selected, the missed calls within the set delay time are displayed.

● When the date and time have not been not set, the date and time are not recorded in the received call history.

● Calls received from callers using dial-in services in such as office may display different numbers from the

caller’s dial-in number.

● When you switch between the voice call and video-phone call during a call, the call type (voice call/video-

phone call) that was specified when you received it will be recorded in the received call history.

● When Keypad Dial Lock or PIM Lock is set, the numbers stored in the received call history up to that point are

deleted. However, the calls received after that are recorded in the received call history, and calls can be made using the received call history during PIM Lock.

● Selecting a multi number registered for Multi Number ☛P353

☛P58

Making/Receiving Calls

Volume Setting

Deleting received calls Delete Received Calls

Highlight a received call z m41

･ To delete all: m42

Select Yes

Adjusting the volume of the caller’s voice Volume Setting

The volume of the caller’s voice can be adjusted from level 1 (lowest volume) to level 6 (highest volume).

･ The set volume is also reflected in the volume of keypad sounds and the playback sounds for

recorded voice call messages and voice memos.

･ The volume changed while talking is retained even after the call is ended. ･ The set volume is retained even if the power is turned off.

Default L EVEL 4

Page 70

Adjusting during a call

Making/Receiving Calls

% during a call

The volume is set automatically by pressing o or waiting for a while after you stopped key operations.

･ To turn up the volume: u or r ･ To turn down the volume: d or l ･ To adjust the volume during a video-phone call: m7

Adjusting in stand-by

Ring Volume Setting

m813 z O to adjust the volume z o

Adjusting the ring volume Ring Volume Setting

You can adjust the ring volume for calls, mail and Message R/F.

The ring volume can be adjusted to any one of 7 levels: Silent and level 1 to level 6 (Movie ringtone

･

can also be set to any one of 7 levels). You can also set STEPTONE (the volume of ring tone changes into Silent → level 1 →

･ The ring volume changed while receiving a call is reset to the original volume when the call is ended. ･ The ring volume changed while in stand-by is retained even if the power is turned off. ･ The ring volume for calls is also reflected to the volume of the sound that plays when confirming the

battery level, ibattery level confirmation sound and i-

Default Ring alert: LEVEL 4 Msg. alert: LEVEL 4

ppli sound and schedule alarm. Note that when STEPTONE is set, the volume of the

...

→ level 6 about every 3 seconds) in stand-by.

ppli sound is level 4.

Adjusting the ring volume while receiving a call

% while receiving a call

The volume is set automatically by pressing o or waiting for a while after you stopped key operations.

･ To turn up the volume: u or r ･ To turn down the volume: d or l

INFORMATION

● To stop the ring tone and vibrator: C while receiving a call

● If STEPTONE is set for the ring volume for calls, the change begins with

while receiving a call.

level 6 when you adjust the volume

Adjusting in stand-by

Example

Adjusting the ring volume for calls

m8121

■ Adjusting the ring volume for mail: m8122

Page 71

･ To set to STEPTONE: u or r when the volume is level 6 ･ To set to Silent: d or l when the volume is level 1

Press o

INFORMATION

● is indicated on the stand-by display when the ring volume for calls is set to Silent. If the vibrator for voice call

is set at the same time, is indicated.

Making/Receiving Calls

Menu 8222 / Menu 8224

Setting operations for incoming voice/video-phone calls

･ The settings of this function are also reflected to the voice/video-phone call in Sound Setting and

Vibrator Setting, and the incoming voice/video-phone call in Alert Lighting Setting.

Default Ring alert: Melody/ 電話・メロディ B(Phone, melody B) (Incoming Call Setting), Melody/ ■ FLOW (Incoming

Videophone Setting), Show image: Standard image Vibrator: OFF Lighting: Flash/Ocean

Example

Setting operations when receiving a voice call

m862

■ Setting operations when receiving a video-phone call: m872

Select each item to set

Ring alert : Sets a ring tone for an incoming call.

･ When you select OFF, no ring tone emits. ･ When you select Melody or Movie ringtone, select a melody or video/i-motion.

Show image: Sets an image displayed for an incoming call.

･ When Select image is selected, select Select image in List images field to set an image. ･ When i-motion is selected, select a video/i-motion from the folder list. If the folder list

is not displayed, select Select image in List images field.

Vibrator : Sets operation of the vibrator for an incoming call.

Lighting

･ Playing and checking a melody or video/i-motion when selecting ☛P116

: Sets the lighting pattern and color of the call indicator.

Press p

Incoming Call Setting/Incoming Videophone Setting

INFORMATION

● Setting Created animation for the image displays the first frame.

● When the video/i-motion with sound only (i-motion without image such as singer’s vocals) is set for the ring

alert, if Show image is reset to the video/i-motion with image only or Flash movie, the ring alert sounds by

(for voice call) or

ターン１

● Some video/i-motion may be unable to be set for the image. Also, the video/i-motion with sound cannot be set.

● Even if Sync melody is set for Lighting, synchronization may not occur depending on the melody.

電話・メロディ

A (for video-phone call).

パ

Page 72

Making/Receiving Calls

Setting the priority screen for incoming calls during a call or packet communication

Priority Comm Mode

This function allows you to select the voice call or packet communication screen to be given priority when a packet communication (or voice) call is received during a voice (or packet communication) call.

･

A screen change caused by this function does not interrupt the call or packet communication.

Default No Set Up

m8681

Priority Comm Mode

1 to 3

No Set Up : Displays the screen for the latest incoming call/communication without setting the

priority.

Voice call : Displays the voice call talking screen by priority. Packet : Displays the packet communication screen by priority.

･ When there is incoming packet communication in i-mode, the voice call talking screen is

displayed by priority regardless of this setting.

Screen display

The following screen is displayed depending on the setting for Priority Comm Mode:

Setting

No Set Up

Voice call Packet Screen displayed during incoming packet

*1 The screen displayed during incoming calls depends on Arrival Call Act. ☛P352 *2 Packet communication in modes other than i-mode does not include receiving of i-mode Mail, SMS and

Message R/F.

*3 Packet communications in modes other than i-mode cannot be received during i-mode communication.

☛P390

Incoming packet communication during

voice call (other than i-mode)*

Screen displayed during a voice call Screen displayed during incoming voice call

communication

Incoming voice call during

packet communication*

Screen displayed during i-mode communication

When you can/could not answer a call

Putting incoming calls on hold when you cannot answer right away

･ Callers are charged for the time spent on hold.

f while receiving a call

Incoming voice

call on hold

Incoming video-phone

call on hold

The incoming call is put on hold (Response and Hold). The other party hears the response hold guidance. For video-phone calls, the response hold image is displayed on your and the other party’s terminals.

Response and Hold

Page 73

n when you are ready to answer the call

ill

･ For a voice call, you can answer the call also by opening FOMA terminal. ☛P65 ･ Press t or n for a video-phone call. Press a to send the substitute image to the other

party. ☛P91

･ If f is pressed or the other party hangs up during Response and Hold, the call is ended.

INFORMATION

● When you use Voice Mail Service or Call Forwarding Service, you can switch to Voice Mail or Call Forwarding

by pressing m and selecting Voice Mail or Call Forwarding while receiving a call.

Setting a response hold guidance Status Message

You can record your own voice as a response hold guidance.

One guidance of up to about 10 seconds long can be recorded.

･･ While a voice or video-phone call is during Response and Hold, the guidance set by this function is

played.

Default Standard

Making/Receiving Calls

Status Message

Example

1 2

INFORMATION

● If you delete the recorded guidance, the default guidance is returned.

● If Standard is set, the guidance “I cannot answer the phone right now. Please wait or call back later (in

Japanese)” is played for the other party during Response and Hold.

Setting a recorded guidance

m864

Select On-hold tone field z 2

･ To reset to the default guidance: 1 z Go to Step 4

Select Record in Edit message field z Speak a response hold guidance after a dial tone

Indication of the allowable recording time

Press p

ecording w

･ An end tone (beep) sounds in about 10 seconds

from the start of recording.

･ To stop the recording: o ･ To check the recorded guidance: Select Play ･ Record cannot be selected when a recorded

guidance has already been registered. Select Delete, select Yes and record after deleting the recorded guidance.

start after a message is displayed.

Page 74

Making/Receiving Calls

On-hold Tone

Setting an on-hold tone On-hold Tone

･ While a voice or video-phone call is during On-hold, the melody set by this function is played. ･ The setting of this function is also reflected to the on-hold tone in Sound Setting.

Default

保留音・ボイス (On-hold tone, voice)

m8693

2 or 3

･ To reset to the default melody: 1 ･ To play a melody: Highlight a melody z p

INFORMATION

● The volume of the on-hold tone played when you put a call on hold cannot be changed.

Using Public mode (Driving mode) Public mode (Driving mode)

Public mode is an automatic answering service considering etiquette in highly public places. When Public mode is activated and a call is received, a guidance is played and informs the caller that the called party is driving or in an area (bus, train, movie theater, etc.) where use of the phone should be refrained and cannot answer the call. Then the call is disconnected.

Public mode can be activated/canceled only in stand-by (including when 圏外 is displayed on the

･

screen).

･ Even in Public mode you can make calls as normal. ･ This function cannot be used during data communication.

Activating Public mode (Driving mode)

( (for over a second)

Public mode is activated and appears. When a call is received, a guidance is played saying “The person you are calling is currently driving or in an area where cellphone should not be used. Please try again later”.

･ When Silent Mode is activated at the same time, Public mode takes precedence.

■ Canceling: ( (for over a second)

■ When Public mode (Driving mode) is activated

No ring tone plays when your FOMA terminal receives a call. appears on the screen and the call is recorded in the received call history. The caller hears a guidance informing that you are driving or in an area where use of the mobile phone should be refrained and the call is then ended.

■ Receiving calls in Public mode (Driving mode) with network services activated

Service Receiving voice calls Receiving video-phone calls

Voice Mail Service

The other party hears the Public mode guidance and the call is then connected to the Voice Mail Service Center.

The call is disconnected without being connected to the Voice Mail Service Center.

Page 75

Service Receiving voice calls Receiving video-phone calls

Call Forwarding Service

Call Waiting Service

Nuisance Call Blocking Service

Caller ID Request Service

The other party hears the Public mode guidance and the call is then forwarded to the specified destination. Whether the caller hears the guidance or not depends on the setting for Call Forwarding Service. When the guidance has been set to on, the Public mode guidance is played. When the guidance has been set to off, no guidance is played.

The Public mode guidance is played and the call is then disconnected.

If the other party is registered as nuisance caller, a guidance indicating that the call was not connected is played and the call is then disconnected.

･ If the other party does not notify the caller

ID, a guidance requesting caller ID is played and the call is then disconnected.

･ If the other party notifies the caller ID, the

Public mode guidance is played and the call is then disconnected.

INFORMATION

● In Public mode, the vibrator and call indicator operation are disabled as well as the following sounds:

The other party does not receive a message with image indicating that Public mode is on and the call is forwarded to the specified destination. If the destination party uses the phone not compatible with video-phone, the call is disconnected.

The Public mode message with image is played and the call is then disconnected.

If the other party is registered as nuisance caller, a message with image indicating that the call was not connected is played and the call is then disconnected.

･ If the other party does not notify the caller

ID, a message with image requesting caller ID is played and the call is then disconnected.

･ If the other party notifies the caller ID, the

Public mode message with image is played and the call is then disconnected.

･ Ring tones ･ Alarms ･ Schedule alarms ･ Low battery alert ･ i-

ppli sounds ･ Charge alert ･ Alarm for Call Cost Limit*

*1 Even if Alert for Call Cost Limit is set to ON and an alarm is set, a message is not displayed.

● The following sounds are played even in Public mode:

･ Keypad sound ･ Open slide/close slide sound when opening/closing FOMA terminal ･ Shutter sound during shooting with the camera and movie camera ･ Sound during recording with the Sound Recorder

● The Audio Functions can be used even in Public mode.

● In Public mode, the i-channel information does not scroll on the stand-by display.

● Even if mail or Message R/F is received, the receiving screen or reception result screen is not displayed. But,

when Check i-mode Message is performed, the receiving screen or reception result screen is displayed. In addition, if mail or Message R/F is received at this time, the receiving screen is displayed and the reception result is updated when receiving is completed.

● When FOMA terminal is turned off or you are outside the service area, the caller hears a guidance informing

out-of-service area instead of the Public mode guidance.

● Making emergency calls (110, 119 or 118) in Public mode cancels Public mode. However, it is not canceled

when emergency calls are made using video-phone.

Making/Receiving Calls

Public mode (power off)

Using Public mode (power off)

Public mode (power off) is an automatic answering service considering etiquettes in highly public places. When Public mode (power off) is set and then a call is received with FOMA terminal switched off, a guidance is played and informs the caller that the called party is in an area (hospital, airplane, priority seat area on a train, etc.) where the phone should be turned off and cannot answer the call. Then the call is disconnected.

Page 76

Activating Public mode (power off)

Making/Receiving Calls

Public mode (power off)

(25251 z n

Public mode (power off) is set. (There will be no change on the display.) When you subsequently turn the power off, Public mode (power off) is activated. In Public mode (power off) if a call is received with FOMA terminal off, a guidance is played saying “The person you are calling is currently in an area where use is prohibited. Please try again later”.

■ Canceling: (25250 z n

■ Checking the setting: (25259 z n

■ When Public mode (power off) is activated

The setting is retained until Public mode (power off) is canceled by dialing “ 25250”. The setting is not canceled by turning the power on. The Public mode (power off) guidance is played even in locations outside the service area or where radio waves are hard to reach. The caller hears a guidance informing that you are in an area where the phone should be turned off and the call is then ended.

■ Receiving calls in Public mode (power off) with network services activated

Service Receiving voice calls Receiving video-phone calls

Voice Mail Service

Call Forwarding Service

Nuisance Call Blocking Service

Caller ID Request Service

The other party hears the Public mode (power off) guidance and the call is then connected to the Voice Mail Service Center.

The other party hears the Public mode (power off) guidance and the call is then forwarded to the specified destination. Whether the caller hears the guidance or not depends on the setting for Call Forwarding Service. When the guidance has been set to on, the Public mode (Driving mode) guidance is played. When the guidance has been set to off, no guidance is played.

If the other party is registered as nuisance caller, a guidance indicating that the call was not connected is played and the call is then disconnected.

･

If the other party does not notify the caller ID, a guidance requesting caller ID is played and the call is then disconnected.

･

If the other party notifies the caller ID, the Public mode (power off) guidance is played and the call is then disconnected.

The call is disconnected without being connected to the Voice Mail Service Center.

The other party does not receive a message with image indicating that Public mode (power off) is on and the call is then forwarded to the specified destination. If the destination party uses the phone not compatible with video-phone, the call is disconnected.

If the other party is registered as nuisance caller, he/she receives a message with image indicating that the call was not connected and the call is then disconnected.

･

If the other party does not notify the caller ID, he/she receives a message with image requesting caller ID and the call is then disconnected.

･

If the other party notifies the caller ID, he/ she receives a message with image indicating that Public mode (power off) is on and the call is then disconnected.

Page 77

Allowing the caller to leave message when you cannot answer the call

By setting Answer Machine, the greeting will be played and the caller can leave a recorded message when you cannot answer the call.

･

Up to 4 messages can be recorded for voice/video-phone calls in total, a maximum of about 30 seconds for each.

･ For voice calls, the caller’s voice is recorded. For video-phone calls, the caller’s voice and image are

recorded.

･ The recording date and time and the phone number are also recorded. However, when the date and

time have not been set or the phone number is not notified, they are not recorded.

･ You can set the time interval between the reception of the call and the start of the greeting. ･ The greeting in your own voice can be recorded. ･ It is advisable that the contents of recorded messages be separately written down in a notebook, etc.

Recorded data may be lost due to failure, repair, change of model or other handlings of FOMA terminal. If the data should be erased, DoCoMo assumes no responsibility for the loss of any data.

Answer Machine

Menu 4611

Setting Answer Machine

Default Deactivate

C11

appears on the stand-by display.

■ Canceling: C12

Replying with Quick Record Message

When Answer Machine has not been set to start, you can activate this function only once by holding down C for over a second while the phone is ringing. This operation does not set Answer Machine to start.

Making/Receiving Calls

Answer Machine

INFORMATION

● When the number of recorded messages becomes 4, is indicated on the stand-by display. The icon does

not disappear even if Answer Machine is canceled.

● If there are already 4 recorded messages, Answer Machine cannot be set. If you attempt to activate Quick

Record Message by holding down C for over a second while the phone is ringing, a warning tone (bleep) sounds and the ring tone keeps sounding. Delete unnecessary recorded messages and set again.

Receiving a call while Answer Machine is set

A call is received

After the ring tone sounds according to Greeting Response Time, the greeting message screen is displayed.

･ When the greeting message is set to Preinstalled, the caller hears the guidance “I cannot answer

the phone right now, please leave your name and message after the beep (in Japanese)”. Set Personalized to play a recorded guidance.

Page 78

Recording the other party’s message starts

Making/Receiving Calls

Indication of the allowable recording time

Recording a message

Answer Machine

INFORMATION

● When the power to the FOMA terminal is turned off or you are outside the service area, Answer Machine does not

● Answer Machine cannot be started and the ring tone keeps sounding when 4 messages have already been

● Public mode (Driving mode) takes precedence over Answer Machine. In Public mode (Driving mode), Answer

● The recording may be disrupted or the screen may be distorted if the signal conditions are poor.

● If another call is received while your guidance message is being played or during recording of a message on

● You can answer a call even while playing the greeting or recording a message. Press n to answer a voice

● When Indicator light is set to ON in Alert Lighting Setting, the call indicator flashes until the unplayed recorded

of voice call

When the recording is completed, the call is disconnected

operate. Use Voice Mail Service (pay service).

recorded. If Voice Mail Service or Call Forwarding Service is set to start, each service starts its operation.

Machine does not operate.

the Answering Machine, that second call will be rejected and the guidance or recording operation for the first call will continue uninterrupted. If you are subscribed to any of the Voice Mail, Call Forwarding or Call Waiting services, the rejected incoming call is recorded in the received call history.

call. For a video-phone call, press n or t to answer by sending your image or a to answer by sending the substitute image. For a voice call, you can also answer the call by opening FOMA terminal. ☛P65 If the message is being recorded at this time, the contents before receiving the call will not be recorded.

message is played.

(with the number of recorded messages) is indicated.

Recording a message

of video-phone call

･ A beep announces the other

party the start and end of the recording. And when about 25 seconds have elapsed since the start of recording, rapid beeps are heard to warn that the end of recording is approaching.

Menu 4613

Setting the response time until the greeting starts Greeting Response Time

Default 008 Sec

C13

Enter the response time (between 0 and 120 seconds)

･ To increase or decrease the entered values: %

INFORMATION

● When Auto Answer (when the included remote controller with microphone or a flat type earphone/microphone

set with switch (optional) is connected), Voice Mail Service or Call Forwarding Service and this function are set simultaneously, those priorities change with the ringing times set for each service and function. To give priority to Answer Machine, the response time for this function should be set shorter than the ringing times set for Auto Answer, Voice Mail Service and Call Forwarding Service. Note that Answer Machine may not be given priority depending on the signal conditions. In this case, answer a call with Quick Record Message.

Page 79

● The same time period cannot be set for both the delayed time of Auto Answer and the response time of Answer

Machine.

Menu 4614

Setting a greeting message Greeting Setting

You can record your own voice as a greeting message.

･ One greeting of up to about 10 seconds long can be recorded.

Default Preinstalled

Making/Receiving Calls

Example

1 2

INFORMATION

● If you delete the recorded greeting, the default greeting is returned.

Setting a recorded greeting

C14

Select Set Greeting field z 2

･ To reset to the default greeting: 1 z Go to Step 4

Select Record in Edit greeting field z Speak a greeting message after a dial tone

･ The operation procedure is the same as when recording a response hold guidance. ☛P71

Press p

Playing recorded messages

You can play or delete recorded messages from the list.

･ Unplayed recorded messages, if any, can be played quickly from the stand-by display. ☛P37

On the recorded message list screen, the date and time of recording and the other party’s phone number appear.

: Unplayed recorded message of a voice call : Unplayed recorded message of a video-phone call : Played recorded message of a voice call : Played recorded message of a video-phone call

･ When the caller’s phone number is notified, the phone number is

displayed and when the caller’s phone number is not notified, the reason for no caller ID is displayed. When the caller is registered in the phonebook, the name is displayed.

Answer Machine

Menu 462

Page 80

Select a recorded message to play

Making/Receiving Calls

Indication of the

Answer Machine

playing time

Playing a message

of voice call

Select whether to delete the played recorded message

･ To delete the recorded message: Select Yes

･ During playback, the following operations are available:

：Adjust volume

% n：Speakerphone on/off (for messages of voice calls only)

■ Deleting:

a Highlight a recorded message z m21

･ To delete all: m22

b Select Yes

■ Registering an entry in the phonebook:

a Highlight a recorded message z m4

･ To add to an existing phonebook entry: m5

b 1 or 2 z Register the name or address ☛P97, P100

･ To add to an existing phonebook entry: 1 or 2 z Select an

entry z Revise registered information ☛P108

■ Making a phone call:

Select a recorded message z n (when making a voice call) or t (when making a video-phone call)

･ You can set certain conditions when making the phone call. ☛P58

：Stop

Page 81

Making/Receiving Video-phone Calls

Video-phone ......................................................................................................80

Making video-phone calls ................................................................................81

Receiving video-phone calls ...........................................................................84

Using Chara-den ...............................................................................................85

Setting images to be sent to the other party ..................................................86

Customizing the display settings during a video-phone call .......................89

Changing the video-phone settings .......................... Videophone Settings 90

Setting of switching between a voice call and a video-phone call

.................................................................................. Notify Switchable Mode 92

Using the video-phone by connecting with the external device

................................................................................................ External Device 93

Page 82

Making/Receiving Video-phone Calls

Video-phone

The video-phone function is available between terminals that support DoCoMo’s video-phone. By using the video-phone, you can talk on the phone while looking each other images. It is also possible to display a still image, substitute image, Chara-den, etc. instead of your self image.

DoCoMo video-phone specifications are compliant with “3G-324M*1 that has been standardized by the international standard 3GPP* specifications can not be established.

*1 3G-324M…An international standard for the 3rd generation mobile video-phone *2 3GPP (3rd Generation Partnership Project)…Area standardization organization established to

develop the standard technology specification for 3rd generation mobile communications systems (IMT-2000).

･ The following 2 communication speeds are provided for the video-phone:

・64K: Connects at communication speed of 64 kbps. ・32K: Connects at communication speed of 32 kbps.

Screen display during a video-phone call

e- j

”. Note that the connection with the video-phones of different

a Main screen Image of the other party is displayed by default. b Communication

speed

c Speakerphone

function

d Sub screen Your image is displayed by default. e Zoom to : Normal to 2 x f Status : Sending your self image

Action mode : Action : Action of parts

g Scene mode/

effect

h Quality of

outgoing image

i Sound/image

sending and receiving status

Switch to v-phone

k Call duration Displayed in the HH:MM:SS format

: 64K : 32K

: On No icon: Off

: Sending the camera-off image

: Sending Chara-den : Sending a frame

: Sending a still image : On-hold

: On Response and Hold : Recording a message

: Recording a movie memo

: Full auto, etc.

The icons for other modes/effects ☛P87

No icon: Normal : Prefer image quality

: Prefer motion speed

: Sending and receiving sound : Sending and receiving image : Sending and receiving sound/image

No icon: Switching is not available.

: Switching is available.

Page 83

Making video-phone calls

･ International video-phone calls are available by using the DoCoMo’s international call service

“WORLD CALL”. ☛P59

Enter a phone number

･ Entering method is the same as for the voice calls.

Talk with the other party

Your image is displayed while being connected.

･ If the phone of the other party is busy, you will hear a busy signal. The

message, Busy. or Connection failed. is displayed on the screen. Press f to end the call and call again later. You can call back quickly by using Redial.

･ When the substitute image is Chara-den, Chara-den may not be

displayed. If this happens, the default image for the substitute image setting is sent to the other party. ☛P91

･ The charging begins when Connected to videophone. is displayed.

The other party’s voice comes out of the speaker (Speakerphone function).

･ To put the call on hold: o ･ To turn on/off the speakerphone function: a or n ･ Depending on the other party’s settings, the substitute image may be

displayed.

･ To disable turning on the speakerphone function automatically, change

the setting in Videophone Settings or activate Silent Mode.

Making/Receiving Video-phone Calls

Making video-phone calls

f when you finish the call

･ To end the video-phone call by closing FOMA terminal, change the settings in Close Setting.

Operations during video-phone calls

The following operations can be performed from the submenu. Hold down C for over a second during a video-phone call to record the other party’s voice and image (Movie Memo).

Submenu item Description Page

Change to voice Switches from a video-phone call to a voice call. P83

Camera settings Applies effects to the image to be sent and adjusts its brightness, color density

Frame/

Subst. image

Image quality Sets the quality of sent and received images. P86

V. phone settings Changes settings for the screen to be displayed during video-phone calls. P90

Send DTMF Transmits tone signals (DTMF) during video-phone calls. P83

g Volume Adjusts the volume. P68

and flicker.

Adds a frame on the image to be sent or sends Chara-den or a still image. P87

P88

P85 P88

Page 84

Making/Receiving Video-phone Calls

INFORMATION

● You can also make a video-phone call by performing in order of Steps 2, Step 1. When t is pressed and the

phone number is entered, the video-phone call is made automatically after about 5 seconds.

● You can make video-phone calls by setting conditions. ☛P58

● When Speakerphone is set to ON in Videophone Settings and Silent Mode is active, if you make a video-phone

call, a confirmation screen appears asking whether to switch to the speakerphone call. Select YES or NO.

● When you talk on a video-phone call while the included remote controller with microphone or a flat type

earphone/microphone set with switch (optional) is connected, the voice sounds from the connected earphone/ microphone regardless of the setting of Speakerphone in Videophone Settings.

● Please note that digital communication charges apply for video-phone calls instead of voice call charges even

if the substitute image or Chara-den is used.

● If a video-phone call cannot be made, the following message is displayed on the screen and then the stand-by

display returns. Note that the displayed message may not reflect the status of the other party’s terminal

Making video-phone calls

correctly, depending on the type of the terminal and/or the network service used by the other party.

Message Description

Check number, then redial. You dialed the phone number not used. Busy. The other party is busy or during a packet communication. Out of service area/power off. The other party is outside the service area or the other party’s terminal is

turned off.

Set caller ID to ON. This message is displayed in case connecting without notifying the caller ID

(when accessing to V-Live or visualnet).

Redial using voice call. This message is displayed when the other party sets Voice Mail Service or

sets Call Forwarding Service and the forwarding destination is the terminal which is not compatible with video-phone.

Connection failed. Set Caller ID Notification to Notify and dial again.

･ The message may appear in cases other than the above.

● If a video-phone call made is not connected, redialing is automatically performed as described below:

64K ON 64K → 32K → Voice call

32K ON 32K → Voice call

When a video-phone call has been made by specifying a multi number, redialing will be made with the specified number. If redialing as voice call occurs, voice call charges apply.

● When there is an incoming call during dialing or redialing a video-phone call, the dialing may be interrupted and

the ring tone may sound.

● Even if sending/receiving the voice or image is aborted and (only voice) or (only image) is displayed

during a video-phone call, the call may be continued as it is.

● Video-phone via 32K line is intended for connection with devices such as PHS with which video-phone calls via

64K line may not be available depending on the network condition. When a video-phone call is made via 64K line, the call type is automatically switched to via 32K for redialing if the communication environment of the other party is found to be 32K area. If ON is selected for Auto redial as voice under the V.phone settings, redialing via 32K line is also given priority. ☛P90

Call type Auto redial as voice setting Redialing operation

OFF 64K → 32K → Disconnection

OFF 32K → Disconnection

･ If a call is made via 32K line, the charge is the same as digital communication charge via 64K.

● If ON is selected for Auto redial as voice under the V.phone settings and you try to make an emergency call (110,

119 or 118) as a video-phone call from the FOMA terminal, the call automatically switches to a voice call.

Page 85

Switching from a video-phone call to a voice call

You can switch to a voice call by operating from the submenu during a video-phone call when the other terminal is compatible with switching calls. Switching can be performed only from the terminal which made the video-phone call.

This operation can be performed between the terminals that support switching between voice call/

･

video-phone call.

･ To switch to a voice call, the other party needs to set Indication ON of Notify Switchable Mode in

advance. ☛P92

m1 during a video-phone call z Select YES

･ A guidance informing that the call is switched is played during switching. ･ Select NO to return to the video-phone talking screen.

INFORMATION

● For precautions when switching between a voice and video-phone call, see INFORMATION in “Switching from

a voice call to a video-phone call”. ☛P55

● Switching from a voice call to a video-phone call ☛P55

Making/Receiving Video-phone Calls

Making video-phone calls

Transmitting tone signals (DTMF) Send DTMF

You can input tone signals (DTMF) while sending your self image ( ), the camera-off image ( ) or Chara-den ( ).

･ The signals may not be received depending on the device of receiver side.

m6 during a call z Enter with dial keys

The entered number is displayed and the tone signals (DTMF) are transmitted.

･ To cancel transmitting tone signals (DTMF): c ･ The tone signals (DTMF) are transmitted by pressing dial keys only even without pressing

m6 while your self image is being sent.

･ When the tone signals (DTMF) are transmitted, the set frame and still image are canceled. ･ Because tone signals (DTMF) are transmitted using dial keys, you cannot use dial keys to make

actions while sending Chara-den.

Page 86

Making/Receiving Video-phone Calls

Receiving video-phone calls

･ You cannot receive a video-phone call by pressing the keys other than t, n or a (Any Key

Answer is unavailable).

A call is received

Receiving video-phone calls

t or n

The ring tone sounds, the display light turns on and the call indicator lights/ flashes.

･ The other party’s phone number, name, image or video/i-motion will be

displayed on the screen according to the dialing condition of the caller or the FOMA terminal settings.

･ To put the incoming call on hold: f

Your image is displayed while being connected.

■ Receiving a video-phone call with the substitute image: a

The substitute image is sent to the other party when the video-phone call is connected.

･ When Chara-den is set as the substitute image, Chara-den may not

be displayed. If this happens, the default image for the substitute image setting is sent to the other party.

Talk with the other party

f when you finish the call

･ To end the video-phone call by closing FOMA terminal, change the settings in Close Setting.

Operations while receiving calls

You can perform the following operations from the submenu:

Submenu item Description

Call Rejection Disconnects the call (the caller does not pay for the call).

Call Forwarding*

*1 Valid when you use Call Forwarding Service and the forwarding phone number has been set.

･ You can operate FOMA terminal with the following keys while receiving a call:

・C (for over a second): Record a message (Quick Record Message) ・C: Stop the ring tone/vibrator ・%: Adjust the ring volume

The other party’s voice comes out of the speaker (Speakerphone function).

･ To put the call on hold: o ･ To turn on/off the speakerphone function: a or n ･ Depending on the other party’s settings, the substitute image may be

displayed.

･ To disable turning on the speakerphone function automatically, change

the setting in Videophone Settings or activate Silent Mode.

Forwards the incoming call to the forwarding phone number.

Page 87

INFORMATION

●

When

Speakerphone

call, a confirmation screen appears asking whether to switch to the speakerphone call. Select

● When a video-phone call arrives while the included remote controller with microphone or a flat type earphone/

microphone set with switch (optional) is connected, the voice sounds from the connected earphone/ microphone regardless of the setting for Speakerphone in Videophone Settings.

● When a video-phone call arrives, it is not connected if the forwarding destination is not set to a video-phone

terminal compliant with the 3G-324M even if Call Forwarding Service is activated. Check the specifications of the forwarding destination when setting it.

● Changing the operation when a video-phone call arrives ☛P69

is set to ON in Videophone Settings and Silent Mode is active, if you receive a video-phone

YES

or NO.

Receiving a call by switching from a video-phone call to a voice call

Making/Receiving Video-phone Calls

･ The switching operation can be performed only from the side which made the video-phone call. It

cannot be performed from the side which received the video-phone call.

･ To receive the request of switching to a voice call, set Indication ON of Notify Switchable Mode in

advance. ☛P92

Receive the request of switching to a voice call during a video-phone call

The video-phone call is switched to a voice call automatically.

･ A guidance informing that the call is switched is played during switching.

Using Chara-den

A character can be sent instead of your image when making a video-phone call. The character can be moved by pressing dial keys during a video-phone call. Some characters move their mouth in time with the sounds picked up by the microphone.

m321 during a call

Select a folder z Select Chara-den

Action list scrolls.

©BVIG

Chara-den

･ If you press dial keys while sending Chara-den as the substitute image,

the character performs the action in accordance with the number of the keys. The following operations can also be performed:

0 ：Cancel action ( ：Display the action list

･ Selecting action moves the character.

( (for over a second)：Switch action modes (Action/Action of parts)

･ The action list of Chara-den set by default ☛P378

Using Chara-den

Page 88

Making/Receiving Video-phone Calls

INFORMATION

● Some Chara-den has no actions.

Setting images to be sent to the other party

The following items can be set:

Switching the outgoing image between your self image and the substitute image

Setting the quality of outgoing and

Setting images to be sent to the other party

incoming images

Setting a frame on the outgoing image P87 Switching display magnifications P89

Applying special effects to outgoing images P87

Switching the outgoing image between your self image and the substitute image

t during a call

Item Page Item Page

P86 Adjusting the brightness/color density/

flicker of outgoing images

P86 Sending the still image/camera-off image P88

･ Each press switches the image between your self image ( ) and the

substitute image (

･ When Chara-den is set as the substitute image, Chara-den may not be

displayed. If this happens, the default image for the substitute image in Image Setting is sent to the other party. ☛P91

or ). ☛P91

P88

©BVIG

The substitute image

Setting the quality of outgoing and incoming images

･ Setting Prefer motion spd makes motions smoother in a little lower-definition image. ･ Setting Prefer img qual makes motions a little slower in a higher-definition image.

Default Normal

Example

Setting the quality of outgoing image

m41 during a call

･ Pressing & during a call also switches the quality of outgoing images.

■ Setting the quality of incoming image: m42 during a call

1 to 3

Page 89

Setting a frame on the outgoing image Frame

The frame can be set while sending your self image.

･ Only the frame with the display size of 176 x 144 (QCIF) or smaller can be selected. As for the

downloaded frames, only the frame with the display size of 176 x 144 (QCIF) can be selected.

m31 during a call

Select a frame

･ The mirror image (left-right reversed image) is displayed on the screen

and the normal image (right directed image) is sent to the other party.

･ To cancel sending the frame: o ･ Frames set by default ☛P378

Applying special effects to outgoing images Scene Mode/Effect

You can apply the following effects to outgoing images. These settings can be changed only while sending your self image.

Item Icon Item Icon Item Icon Item Icon

Full auto Night Gourmet Mono tone (red)

Sensitivity up Twilight Letter Mono tone (green)

Adjust backlight Surf&Snow Whiten Mono tone (blue)

Spot photometry Sport Suntan Monochrome

Scenery Pet Soft touch Sepia

･ For details ☛P170

Defa ult Full auto

Making/Receiving Video-phone Calls

Setting images to be sent to the other party

m21 during a call

1 to 9, 0, ( or #

･ Press

The effect currently applied

to switch the pages.

Page 90

Making/Receiving Video-phone Calls

Adjusting the brightness/color density/flicker of outgoing images Camera Settings

You can adjust the brightness and color density in 5 levels. Also, you may be able to control the flicker of images, if it occurs, by making settings according to the power supply frequency in your area.

･ This setting can be changed only while sending your self image. ･ The brightness and color density may be unable to be changed depending on the setting for Screen

Mode/Effect.

･ The settings are retained even after the call is finished.

Default Brightness: Level 3 Density: Level 3 Flicker adjustment: Auto

m2 during a call z Select an item

■ Adjusting brightness and color density:

Setting images to be sent to the other party

■ Adjusting flicker: 3 z 1 to 3

･ Changes in this setting will also be reflected in the flicker adjustment setting for the Camera.

a 2 z Highlight Brightness slider z b d to highlight Density slider z & z p

･ Your self image is displayed on the main screen while adjusting.

You can check the change of brightness or color density as you shift the slider’s position.

･ If you do nothing on the terminal for some time after adjusting, the

settings are not changed and the talking screen reappears.

Sending the still image/camera-off image

Select a still image or the image displayed as Camera off (camera-off image).

･ This setting is not available while the frame is being sent (☛P87). ･ Only the still image that is 176 x 144 (QCIF) or smaller and permitted to output from FOMA terminal

can be set. Images prohibited from being output from FOMA terminal (File restriction) ☛P309

m3 during a call z Select an item

■ Sending the camera-off image: 3

･ When the camera-off image is set, the substitute image set in Image Setting is sent.

However, if Chara-den is set as the substitute image, the default image (camera-off image) is sent.

■ Sending a still image:

a 4 z Select a folder b Select a still image

･ To display a still image: Highlight a still image z p ･ To display the previous image: o while sending a still image

Page 91

Switching display magnifications Zoom

･ Available only while your self image is being sent.

Default Normal ( )

% during a call

･ Press u to switch the magnification of image as follows. Press d to switch in the reverse

order. Normal ( ) → 2 x ( )

Making/Receiving Video-phone Calls

Customizing the display settings during a video-phone call

･ The settings are retained after the call is finished.

Switching between the main screen and sub screen

Default Main screen image: Other party’s image Sub screen image: Your self image

p during a call

･ Each press switches the main screen and sub screen by turns.

Main screen : Other party’s image Main screen : Your self image Sub screen : Your self image Sub screen : Other party’s image

Changing the main screen size

Default Large

p (for over a second) during a call

･ Each press switches the screen size in the following order: Large → standard → small → large →

…

Setting the screen to be displayed during a call Videophone Settings during a call

Default Display setting: Both sides Sub screen: My side Screen size: Large Display light: Always on (normal)

m5 during a call

Select each item to set

･ For setting each item, follow Step 2 in “Changing the video-phone settings”. ☛P90

Press p

Customizing the display settings

Page 92

Making/Receiving Video-phone Calls

Changing the video-phone settings Videophone Settings

Set the operation to be performed when a video-phone call is not connected and the screen displayed during a video-phone call. You can also set whether to send your self image to the other party for outgoing calls.

･

The auto redial as voice function is provided to make the access to the other party for sure. Setting this function on switches the call type to voice call by redialing automatically when the other party’s terminal does not support the video-phone function or cannot receive a video-phone call while using the mova service through Dual Network Service. Redialing does not occur, however, if you call an ISDN-sync 64 kbps or PIAFS access point, or an ISDN video-phone incompatible with 3G-324M (as of February 2006), or if you dial the wrong number. Note that some calls may require the call charge.

Default Auto redial as voice: OFF Display setting: Both sides Sub screen: My side Screen size: Large

Videophone Settings

Send camera image: ON Visual preference: Normal Display light: Always on (normal) Speakerphone: ON

m873

Select each item to set

Auto redial as voice：Sets whether to redial a voice call automatically when a video-phone call is

not connected.

Display setting ：Specifies whether to display either your self image or the other party’s image

or both images during a video-phone call.

･ If you set other than Both sides, the sub screen cannot be set.

Sub screen ：Specifies whether to display your self image or the other party’s image on the

sub screen during a video-phone call.

Screen size ：Sets the main screen view size. Send camera image：Specifies whether to send your self image to the other party for outgoing calls.

･ When OFF is set, the image set in the substitute image setting will be sent.

Visual preference ：Sets the image quality on the other party’s screen. Display light ：Sets the display light during a video-phone call.

･ When Terminal settings is set, it operates according to the setting for Display

Light Setting (☛P131).

Speakerphone ：Specifies whether to turn on the speakerphone function automatically once a

video-phone call is connected.

Press p

INFORMATION

● Even when Auto redial as voice is set to ON, redialing may not be performed depending on the situation of the

other party or network.

● When Auto redial as voice is set to ON, if you make a video-phone call during a packet communication with a PC

connected, the call is redialed as voice call without connecting to a video-phone call. During a voice call or 64K data communication, the call is not connected to a video-phone call and redialing is not performed, either.

● If redialing as voice call occurs with Auto redial as voice set to ON, voice call charges apply instead of digital

communication charges.

● When Speakerphone is set to ON and Silent Mode is active, if you make a video-phone call, a confirmation

screen appears asking whether to switch to the speakerphone call. Select YES or NO.

Page 93

Setting the image to be displayed during video-phone calls Image Setting

Change the images to be sent to the other party during a video-phone call such as the substitute image, answer machine image, response hold image, on-hold image and movie memo image.

･ You cannot set the following images:

・Still image with a size larger than 176 x 144 (QCIF) ・Animation and Created animation ・Still image in the format other than JPEG and GIF formats ・Image that is prohibited from being output from FOMA terminal (File restriction) ☛P309

Setting the substitute image

Default Default Chara-den

m874

1 z Select Image field

■ Setting other still images:

a 4 z Select Select image z Select a folder b Select a still image

･ To display a still image: Highlight a still image z p ･ The selected image overlapped with text message is displayed on the other party’s

terminal.

■ Setting the default Chara-den:

Default Chara-den ( ブンブン (Dimo)) is set.

■ Setting the default still image: 2

Default image (camera-off image) is set.

■ Setting other Chara-den:

a 3 z Select Select image z Select a folder b Select Chara-den

･ To display Chara-den: Highlight Chara-den z p

Making/Receiving Video-phone Calls

Videophone Settings

Press p

INFORMATION

● If the Chara-den set as the substitute image is deleted, the substitute image is reset to Default Chara-den. If the

still image or the default Chara-den is deleted, the substitute image is reset to Default image.

Page 94

Making/Receiving Video-phone Calls

Notify Switchable Mode

Changing the answer machine/response hold/on-hold/movie memo images

Default Answer machine image, Response hold image, On-hold image, Movie memo image: Default

m874

2 to 5

Select Image field z 2

In case of the answer

machine image

Select Select image in List images field z Select a folder

Select an image

Press p

･ To reset to the default image: 1 z Go to Step 6

Setting of switching between a voice call and a video-phone call

Set whether to notify the other party’s terminal that your terminal can switch between a voice call and a video-phone call.

･

You cannot change the setting during a voice call or video-phone call.

･ This setting cannot be made outside the service area. Operate the terminal in locations with good

radio wave condition.

Default Indication ON: active

m8761

■ Deactivating: m8762

■ Checking the current setting: m8763

Select Yes

Notify Switchable Mode

Page 95

Using the video-phone by connecting with the external device External Device

By connecting FOMA terminal to an external device such as PC by the included USB cable, you can make and receive video-phone calls from the external device. If you want to use this function, install a video-phone application in a dedicated external device or a PC, and prepare devices such as an earphone/microphone or USB-compatible Web camera (available in market).

･

This function is not available when FOMA terminal is not connected to an external device.

･ Refer to the instruction manual of external devices for hardware requirements or setting/operating

instructions of video-phone applications.

･ The application called “

compatible with this function is available on the DoCoMo video-phone software website. Visit the site below and download it: http://videophonesoft.nttdocomo.co.jp/

Default Terminal

m875

1 or 2

ドコモテレビ電話ソフト

Base station

FOMA video-phone communication speed: 64K or 32K

2005 (DoCoMo video-phone software 2005)” that is

FOMA

network

Making/Receiving Video-phone Calls

External Device

INFORMATION

● A video-phone call cannot be made from an external device during a voice call.

● When you subscribe to Call Waiting Service, if a video-phone call is received through an external device during

a voice call, it is recorded as a missed call in the received call history. The same applies when a voice call, video-phone call or 64K data communication is received during a video-phone call using an external device.

Page 96

MEMO

Page 97

Phonebook

Phonebooks supported by FOMA terminal ....................................................96

Registering entries into the FOMA terminal phonebook

..................................................................................... Phonebook New Entry 97

Registering entries into the UIM phonebook

........................................................................... UIM Phonebook New Entry 100

Setting group names and incoming/outgoing actions....... Group Setting 102

Making calls from the phonebook............................... Phonebook Search 103

Editing phonebook entries ............................................... Edit Phonebook 108

Copying phonebook entries ..........................................................................110

Deleting phonebook entries ......................................... Delete Phonebook 111

Setting functions for phonebook entries .....................................................111

Protecting the secret phonebook entries ......................... Secret Attribute 113

Checking the number of registered phonebook entries

........................................................................................ Check No. of Items 114

Using simple dialing to make calls ............................................ Quick Dial 114

Page 98

Phonebook

Phonebooks supported by FOMA terminal

FOMA D851iWM supports the FOMA terminal phonebook and UIM phonebook.

The number of entries Up to 700 Entry items

Phonebook Search

Various settings

Others

Item FOMA terminal phonebook UIM phonebook

Name/reading Up to 32 one-byte (16 two-byte) characters

Image/video 1entry per person Group Entries can be classified into 30 groups

Phone number/icon Up to 5 phone numbers per person,

Mail address/icon Up to 5 mail addresses per person,

Setting for incoming phone calls

Settings for receiving

mail Other settings Phonebook No.

Show All Names Group Search Name Search Ranking Search Ph Book No. Search Number Search Secrecy Search

Secret Attribute Caller ID Setting Reject/Accept Call Secret Code Setting Video-phone Rate Setting

Changing order of phone numbers or mail addresses/switching phonebook Nos.

Quick Dial Quick Mail Mail Search Site display Send Ir Data

for name and up to 32 one-byte characters for reading can be set.

and

2,105 registered in the phonebook. An icon can be set for each.

2 *3

グループなし

numbers in total, can be

addresses in total, can be

(No group).

○×

○ ○

○ ○○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○×

○×

○ ○ ○○ ○ ○

Up to 50

Up to 21 one-byte (10 two-byte) characters for name and up to 25 one-byte (12 two-byte) characters for reading can be set.

Entries can be classified into 10 groups and

グループなし

Only one phone number can be set per person. Icons cannot be set.

Only one mail address can be set per person. Icons cannot be set.

*1 The number of items that can be registered may be decreased depending on the type of data registered. *2 Ring alert, incoming vibrator, lighting pattern and lighting color can be set. In addition, the settings for

incoming calls by groups are available. *3 The substitute image for video-phone can also be set. *4 The following settings are available:

URL, note, postal code, address, company name, job title and birthday

○ : Available

× : Not available

(No group).

× ×

○

○ × × ○ ×

× × × ×

× ×

× ○

Page 99

Name displays

If a call is made/received to/from a party registered in the FOMA terminal phonebook or UIM phonebook, the name registered in the phonebook is displayed on the screen displayed during making/receiving a call or talking. In addition, the name registered in the phonebook is also displayed in the redial data, received call history, recorded messages, senders of received mail, addresses of sent/unsent mail, custom menu, etc. It is also displayed when you enter the phone number or mail address without searching the phonebook.

･ When phonebook entries of different names with the same phone number/mail address are

registered in both phonebooks, the name registered in the FOMA terminal phonebook is displayed.

･ In case some different names are registered for the same phone number or mail address in the

FOMA terminal phonebook, the name registered first is displayed.

･ When a mail is received, if the mail address including “@docomo.ne.jp” exactly matches a mail

address registered in the phonebook, the settings of the phonebook take precedence and the name registered in the phonebook is displayed. Note that in case i-mode terminal is used for sender, even when the mail address is registered in the phonebook without the domain name “@docomo.ne.jp”, the settings of the phonebook take precedence and the name registered in the phonebook is displayed. When the mail address is “mobile phone number @docomo.ne.jp”, register in the phonebook without “@docomo.ne.jp”.

･ When SMS is received and the phone number exactly matches a phone number registered in the

phonebook, the settings of phonebook take precedence.

･ If there is an incoming mail from the other party saved in the phonebook, the name registered in the

phonebook is displayed as ticker on the task bar. Note that if mail is received from the other party with Secret Attribute set while not in Secret Mode, the mail address is displayed on the task bar.

Registering entries into the FOMA terminal phonebook Phonebook New Entry

Phonebook

Phonebook New Entry

･ Maximum number of items that can be registered ☛P96

･ It is recommended that you keep a separate written record of all the information you register in the

phonebook. If you have a PC, you can use data link software and the included USB cable to send the data to the PC.

･ Registered data may be lost due to failure, repair, change of model or other handlings of FOMA

terminal. DoCoMo assumes no responsibility for accidentally erased data.

･ Please be informed that if you copy the data registered in FOMA terminal to a new terminal at a

DoCoMo Shop when switching to a new model, etc., the specifications of some new models may not allow copying of the data.

m42

Enter a name (Up to 32 one-byte or 16 two-byte characters)

･ Kanji, hiragana, katakana, alphabetic and numeric characters, symbols

and pictograms can be entered. However, symbols and pictograms entered may not appear correctly if transferred by infrared communication, etc.

･ If a name is not entered, the entry cannot be registered.

9797

Page 100

Phonebook

Phonebook New Entry

Name and reading

% to select the item and enter

Image ：Set an image or video/i-motion that is displayed when a call is made/received or

Group ：Select a group from

Phone number：Enter the phone number including the area code (up to 26 digits) and select an

Check the name and reading on New screen.

■ Correcting the name: Select the name field z correct the name z

■ Correcting the reading: Select the reading field z correct the

reading (up to 32 one-byte characters)

･ If you correct the name, the reading of the name will not automatically

reflect changes made to the name.

the phonebook data is checked.

･ To restore the default setting: 5

■ Setting an image: 1 z Select a folder z Select an image

･ If an image with horizontal and vertical (or vertical and horizontal) sizes

exceeding 640 x 480 is selected, a confirmation screen is displayed asking whether to save the reduced image. If you select Yes and set the image, the image of which size is reduced to 96 x 72 (phonebook) or smaller is saved.

･ When a call is made or received or the phonebook data is checked, for

animation, the playing image is displayed and for Created animation, the first image is displayed.

■ Shooting a still image with the Camera and setting that image: 2 z

shoot the still image z o

･ The size of a still image is set to 96 x 72 (phonebook) automatically. ･ It is not possible to take still images while one of the Audio Functions is in

use.

■ Setting video/i-motion: 3 z select the folder z select video/

i-motion

･ You can set video/i-motion with only images when the size is set to

Sub-QCIF (128 x 96) or QCIF (176 x 144).

･ Playing and checking a video/i-motion when selecting ☛P116

■ Recording a video with the Movie Camera and setting that video: 4

z Shoot video z o

･ The size of a video is set to QCIF (176 x 144) automatically. Sounds are

not recorded.

･ It is not possible to record videos while one of the Audio Functions is in

use.

グループ

グループなし

Group Setting ☛P102

icon.

･ Up to 5 phone numbers per person can be registered. Saving the first phone

number displays items to be added.

･ Pause (P), timed pause (T), “ ＋ ”, “ ＃ ” and sub-address delimiter ( ) can be

registered.

(No group).

1 (Group 1) to

グループなし

グループ

is set by default.

30 (Group 30) and