Page 1
F-12C
INSTRUCTION MANUAL
’11.7
Page 2
Thank you for purchasing "F-12C" mobile terminal.
Introduction
Before using your FOMA terminal, or when
necessary, read this manual to ensure safe use and
handling.
Before using the FOMA terminal
･
F-12C supports W-CDMA, GSM/GPRS, Wireless LAN
System.
･
Because your FOMA terminal uses wireless transmission, it
may not function in locations where it is difficult for radio
waves to penetrate, such as tunnels, underground
passages and some buildings, in areas where radio waves
are weak, or out of service area. Even when you are high up
in a tall building or condominium and nothing blocks your
view outside, your FOMA terminal may not be able to
receive or transmit signals. Also, communication may be
interrupted even when there are strong radio waves with 4
signal status icons on the FOMA terminal and you are not
moving (traveling).
･
Because your FOMA terminal uses radio waves to
communicate, it is possible that a third party may
attempt to tap your calls. However, the W-CDMA, GSM/
GPRS automatically applies a confidential
communication function to all calls, so even if a third
party could somehow tap a call, they only hear noise.
･
Your FOMA terminal encodes voice communication as
digital data. When you are operating your FOMA
terminal while moving to a location subject to weaker
radio wave conditions, the transmitted digital data may
not be correctly decoded and as a result the decoded
voice may differ somewhat from the actual voice.
･
Maintain a separate record of the data (Phonebook,
Schedule, Memo, etc.) you saved in the FOMA terminal.
Note that DOCOMO assumes no responsibility for any
loss of saved contents of data resulting from
malfunction, repair, changing of the model or other
handling of the FOMA terminal.
･
In the FOMA terminal, as it is for a PC, some applications
that you install may give instability of the operation, or
may send your location information or personal
information registered to the FOMA terminal to outside
via the Internet and the information may be used
improperly. Please thoroughly check a provider and
operation status of the application etc. which you want
to use beforehand and then use it.
･
You are recommended to save important data to
microSD card.
･
This FOMA terminal supports FOMA Plus-Area and
FOMA HIGH-SPEED Area.
･
Descriptions in this manual are for the FOMA terminal
with a DOCOMO's UIM inserted.
SIM unlock
This FOMA terminal supports SIM unlock. If you release
SIM lock, you can use UIM by a carrier other than NTT
DOCOMO.
･
The SIM unlock service is provided at a docomo Shop.
･
A SIM unlock charge is separately required.
･
If you use a UIM other than by DOCOMO, available
services and functions will be limited. DOCOMO is not
liable to any failures or malfunctions.
･
For details of SIM unlock, refer to NTT DOCOMO
website.
About manuals for F-12C
"Quick start guide" (in Japanese only)
This manual provides information about screens and
operations of basic functions.
"Instruction Manual” (installed in the FOMA terminal)
This manual provides information and operations of all
the functions. (In Japanese only)
In the Applications menu, [Instruction Manual]→Select a
search method
This manual provides information and operations of all
the functions.
〈
manual/download/index.html
*You can download the latest information.
"Instruction manual" (PDF file)
From PC〉 http://www.nttdocomo.co.jp/support/trouble/
Page 3
Accessories and main options
<F-12C and included accessories>
F-12C (including Back Cover F63 and warranty)
Quick start guide
(Japanese)
Desktop Holder F34
Desktop Holder
F34 is made of
recycled ABS from
used products.
FOMA USB Cable for
PC connection T01
Battery Pack F21
microSDHC card (2GB)*
(Sample)
(including Instruction manual)
* Inserted to the FOMA terminal at the
time of purchase
FOMA charging
microUSB adapter T01
<Main options>
FOMA AC Adapter 01/02
(with warranty and operation manual)
Other options→P119
･
In this manual, "F-12C" mobile terminal is usually
referred to as "FOMA terminal".
･
The images or illustration used in this manual are
examples. They may differ from the actual displays.
･
In this manual, "authenticate" indicates the
operating procedure for entering the terminal
security code in 4-8 digits (→P47).
･
Unauthorized copying of parts of or this entire
manual is prohibited.
･
The contents in this manual, URL and contents are
subject to change without prior notice.
1
Contents/Precautions
Page 4
Contents
■
Accessories and main options .........................1
■
Important precautions on using F-12C ............4
■
Precautions (Always follow these directions)
.............................................................................5
■
Handling precautions ......................................13
■
Waterproofness ...............................................17
Before using the FOMA terminal
................................................ 21
Part names and functions........................................ 21
UIM............................................................................ 23
microSD card............................................................ 24
Battery pack .............................................................. 24
Charging ................................................................... 26
Turning power ON/OFF ........................................... 28
Basic operation (Using touch panel) ...................... 29
Initial setting ............................................................. 31
Screen/Icon ............................................................... 31
Home screen............................................................. 33
Applications screen.................................................. 35
Character Entry......................................................... 39
Lock/Security ............................................................ 47
Calling/Network Services........ 51
Making a call............................................................. 51
Receiving a call......................................................... 52
Operation during a call............................................ 53
Call log ...................................................................... 54
Contacts .................................................................... 54
PhoneBookCopy....................................................... 57
Editing Profile ........................................................... 57
Network services...................................................... 58
Settings................................... 63
Setting menu.............................................................63
Wireless & networks.................................................63
Sound settings ..........................................................69
Display settings.........................................................71
Multimedia ................................................................72
Applications...............................................................72
Accounts & sync .......................................................74
Privacy .......................................................................75
microSD card & phone storage ...............................75
Searching the FOMA terminal or sites....................76
Lang. & keyboard......................................................76
Voice input & output.................................................77
Accessibility...............................................................77
Date & time................................................................78
About phone..............................................................78
Pedometer .................................................................79
Mail/Internet............................ 80
Mail types available on the FOMA terminal ...........80
Email ..........................................................................80
sp-mode mail ............................................................83
Gmail..........................................................................83
SMS............................................................................85
Early warning "Area Mail"........................................87
Google Talk ...............................................................87
Browser......................................................................90
2
Contents/Precautions
Page 5
Multimedia .............................. 93
Camera...................................................................... 93
Barcode Scanner...................................................... 96
Gallery....................................................................... 97
Music player ............................................................. 97
Stereo earphones..................................................... 99
YouTube.................................................................... 99
File management................... 100
Infrared communication........................................ 100
Bluetooth communication..................................... 101
Operating data on a microSD card from a PC
................................................................................. 103
Applications.......................... 104
Android Market ...................................................... 104
docomo market ...................................................... 106
GPS/Navigation ...................................................... 106
Osaifu-Keitai ........................................................... 110
Clock........................................................................ 112
Calendar.................................................................. 112
Notepad .................................................................. 113
Calculator................................................................ 113
ThinkFree Office ..................................................... 114
Other applications.................................................. 114
International roaming ........... 115
Outline of international roaming (WORLD WING)
................................................................................. 115
Available service overseas .................................... 115
Before using the FOMA terminal overseas.......... 115
Settings for international roaming ....................... 116
Making/Receiving a call in the country you stay . 117
After returning to Japan ........................................ 118
Appendix/Index ..................... 119
Options and related devices ..................................119
Troubleshooting (FAQ)...........................................119
Warranty and After-Sales Service .........................124
Software update......................................................126
Main specifications.................................................130
Specific Absorption Rate (SAR) of Mobile Phones
..................................................................................132
About Wi-Fi..............................................................136
Export Administration Regulations....................... 137
Intellectual Property Right......................................137
RSS terms of service ..............................................139
Index ........................................................................140
3
Contents/Precautions
Page 6
Important precautions on
using F-12C
･
The FOMA terminal does not support i-mode sites
(programs) or i-αppli.
･
Google applications and service contents are subject to
change without prior notice.
･
The FOMA terminal automatically performs
communication for some functions, for example, to
synchronize data, check the latest software or maintain
connection with the server. If you transmit a large
amount of data such as downloading applications or
watching video, a packet communication charge
becomes high. Subscription of packet flat-rate service is
highly recommended.
･
Setting the phone to manner mode does not mute
sounds (playback of video or music, alarm, etc.) other
than the ring tone, operation sound, and notification
sounds.
･
The software on the FOMA terminal can be updated with
the latest information.→P126
･
Improving the FOMA terminals quality or upgrading
operation system may be included in the software
update. And some applications used in the previous
version may not be available or some unintended bugs
may occur after software update.
･
When the memory of the microSD card or FOMA
terminal is almost full, running application may not
operate normally. In this case, delete saved data.
･
Set the screen lock to ensure the security of your FOMA
terminal for its loss.→P49
･
For the information on the services provided by Google,
refer to the terms of use for Google Inc. And for the
details on other web services, read terms of use for each
service.
･
If you use a UIM (blue), you cannot use the FOMA
terminal overseas. If you have a UIM (blue), bring it to a
docomo Shop to replace.
･
If your FOMA terminal is lost, change your each account
password using a PC to prevent other persons from
using Google services such as Google Talk, Gmail,
Android Market, etc., Twitter, Facebook and mixi.
･
The FOMA terminal supports only sp-mode, mopera U
and Business mopera Internet (VPN setting is limited
only to PPTP). Other providers are not supported.
･
To use Wi-Fi tethering, a subscription to sp-mode is
required.
･
When using Wi-Fi tethering, packet communication
charges may become high. Subscription of packet flatrate service is highly recommended.
･
If you use packet flat-rate service, when Wi-Fi tethering
is enabled, all packet communications including
browser and mail, etc. become "communications by
connecting to an external device such as a PC", even
when any Wi-Fi device is not connected. Be sure to
disable Wi-Fi tethering after use.
･
For details on usage fee, refer to http://
www.nttdocomo.co.jp/english/.
4
Contents/Precautions
Page 7
Precautions (Always follow
these directions)
・
Before using your FOMA terminal, or when necessary,
read the precautions below to ensure safe use and
handling. After reading this manual, keep it carefully.
・
These precautions are intended to protect you and
others around you. Read and follow them carefully to
avoid injury, damage to the product or damage to
property.
・
The signs below differentiate between the levels of
danger that can occur if the product is not used within
the specified guidelines.
This sign denotes that death
or serious injury may directly
DANGER
WARNING
CAUTION
・
The symbols below show specific directions.
This symbol denotes that the action is
prohibited.
Don’t
This symbol denotes that disassembling the
phone or its components is not allowed.
No disassembl y
result from improper use.
This sign denotes that death
or serious injury may result
from improper use.
This sign denotes that minor
injury or damage to property
may result from improper use.
This symbol denotes that using the phone
or its components with wet hands is not
No wet hands
allowed.
This symbol denotes that using the phone
or its components in a bathroom or other
No liquids
highly humid area is not allowed.
This symbol denotes that an instruction
must be obeyed at all times.
Do
This symbol denotes that the equipment
should be unplugged.
Unplug
■
Precautions contain the description below.
Handling the FOMA terminal, battery pack, adapter,
desktop holder and UIM (common)................................ 5
Handling the FOMA terminal............................................... 7
Handling battery pack .......................................................... 9
Handling adapter and desktop holder .............................. 10
Handling UIM...................................................................... 11
Handling mobile phones near electronic medical
equipment ....................................................................... 11
Material list .........................................................................12
◆
Handling the FOMA terminal, battery
pack, adapter, desktop holder and UIM
(common)
DANGER
Do not use, store, or leave the equipment in
hot areas such as near flames or in areas
under strong direct sunlight such as inside a
Don’t
vehicle.
May cause fire, burns or injuries.
5
Contents/Precautions
Page 8
Do not put the terminal into heating cooking
device such as microwave oven or highpressure container.
Don’t
May cause fire, burns, injuries, electric shock.
Do not disassemble or remodel the
equipment.
May cause fire, burns, injuries, electric shock.
No disassembl y
Do not let the terminal get wet with water,
drinking water, urine of pet animals, etc.
May cause fire, burns, injuries, electric shock.
No liquids
For waterproofness, refer to the page.
Use the battery pack and adapter specified by
NTT DOCOMO for your FOMA terminal.
May cause fire, burns, injuries, electric shock.
Do
WARNING
Do not throw the equipment or give hard
shock to it.
May cause fire, burns, injuries, electric shock.
Don’t
Keep conductive materials (metal pieces,
pencil lead, etc.) from coming in contact with
the charging jack or external connection jack.
Don’t
Do not put those materials inside the
terminal.
May cause fire, burns, injuries, electric shock.
Do not cover or wrap the terminal with a
blanket, etc. while using or charging.
May cause fire or burns.
Don’t
Turn the FOMA terminal OFF and stop
charging before entering a place such as a
Do
gas station where flammable gases are
generated.
The gas may catch fire.
When using Osaifu-Keitai in a place as a gas station,
turn OFF the terminal before using it.
(When Osaifu-Keitai lock is activated, deactivate it
before turning OFF the terminal.)
If the equipment starts giving off a strange
smell, overheats, becomes discolored or
Do
deformed during use, charging or in storage,
immediately perform the following
operations.
･
Remove the power plug from the wall outlet or
cigarette lighter socket.
･
Turn the FOMA terminal OFF.
･
Remove the battery pack from the FOMA terminal.
May cause fire, burns, injuries, electric shock.
→
P17
Do not leave the equipment on unstable or
sloping surfaces.
May cause injuries.
Don’t
Do not store the equipment in extremely
humid, dusty or hot areas.
May cause fire, burns, electric shock.
Don’t
Children using the equipment should be
instructed in proper operation by an adult. Do
Do
not allow them to use the equipment without
adult supervision.
May cause injuries.
Store the equipment out of reach of small
children.
May be accidentally swallowed or cause injuries.
Do
Be careful especially when using the FOMA
terminal connected to the adapter
Do
continuously for a long time.
If you use applications, or a call while charging the
battery for a long time, the FOMA ter minal, battery
pack and adapter may be heated.
Directly touching a hot part for a long time, you may
have redness, itching or rash on your skin, or it may
result in low-temperature burns depending on your
constitution and/or health condition.
CAUTION
6
Contents/Precautions
Page 9
◆
Handling the FOMA terminal
WARNING
Do not direct the infrared data port toward
your eye and transmit signals.
May cause harmful effect on eyes.
Don’t
Do not direct the infrared data port toward
home electric appliances etc. equipped with
infrared device when using infrared
Don’t
communication.
May cause an accident because of malfunction of
infrared device.
Do not turn on the light by getting the
lighting part closer to other person's eyes.
When shooting infants, keep at least 1 m
Don’t
away from the object.
May impair eyesight. And may cause accidents like
injury etc., by dazzling or astounding other people.
Do not put foreign objects such as liquid like
water, metal pieces or burnable things into
UIM or microSD card slot.
Don’t
May cause fire, burns, injuries, electric shock.
Do not turn on the light aiming directly at the
driver of the car etc.
May disturb driving and cause an accident.
Don’t
Turn the FOMA terminal OFF in areas where
use is prohibited, such as in airplanes and
Do
hospitals.
May cause electronic equipment or electronic medical
equipment to fail or malfunction.
When using the phone in a medical facility, be sure to
observe the regulations of the facility.
If you do prohibited act such as using the phon e in an
airplane, you will be punished according to law.
If usage of mobile phones in an aircraft is admitted by
setting airplane mode, etc., use the terminal under the
direction of the airline.
When you talk by setting handsfree or ring
alert is sounding, keep the FOMA terminal
Do
away from your ear. And, when connecting
the earphone/microphone etc. to the FOMA
terminal and play a game or music, adjust the
volume moderately.
Too loud volume may cause a hearing loss.
And, if you cannot hear the sound around you clearly,
it may cause an accident.
If you have weak heart, be careful when
setting the Vibrate alert (vibration) or alert
Do
volume setting.
May cause harmful effect on heart.
When you use electronic medical equipment,
check with the equipment manufacturer to
Do
determine how the device is affected by radio
waves before using.
May cause harmful effect on electronic medical
equipment etc.
7
Contents/Precautions
Page 10
Turn the FOMA terminal OFF near highprecision electronic control equipment or
Do
electronic equipment using low-power
signals.
May cause the equipment to fail or malfunction.
Examples of electronic equipment to avoid.
*
Hearing aids, implanted pacemakers or defibrillators, other
electronic medical equipment, fire al arms, automatic doors
and other automatic control equipment.
Users wearing implanted pacemakers or d efibrillators or
other electronic medical equipment should check with the
manufacturer or sales outlet about the effect of radio
frequencies on the equipment.
When the display or camera lens is
accidentally broken, be careful of broken
Do
glass or exposed internal parts of the FOMA
terminal.
Surfaces of display and camera lens are made of
plastic panels and they are structured for the glass not
to scatter, however, if you mistakenly touch broken or
exposed parts, you may be injured.
CAUTION
Do not swing the FOMA terminal by the
strap, etc.
May cause accident such as injury to yourself or
Don’t
others by hitting.
Do not use damaged the FOMA terminal.
May cause fire, burns, injuries, electric shock.
Don’t
When using the motion sensor, check the
safety around you, hold the FOMA terminal
firmly, and do not shake it unnecessarily.
Don’t
May cause accident such as injuries.
If the display part is accidentally broken and
the liquid crystal leaks out, do not make the
substance contact with your skin of face or
Don’t
hands.
May cause loss of sight or skin problems.
If the liquid crystal gets into your eyes or mouth, rinse
it with clean water and see a doctor immediately.
And, if the liquid adheres to skin or clothing, use
alcohol etc. to wipe it off, then wash with soap.
To use the terminal in car, check with
automobile manufacturer or dealer to
Do
determine how the device is affected by radio
waves before using.
In rare cases, using the phone in some vehicle models
can cause the vehicle's electronic equipment to
malfunction. In that case, stop using the terminal
immediately.
The use of the FOMA terminal may cause
itching, rashes, eczema, or other symptoms
Do
depending on the user's physical condition. If
you develop skin problems, stop using the
phone immediately, and see a doctor.
"Material list (P12)"
When watching the display, take a certain
distance from the display in a fully bright
Do
place.
May reduce visual acuity.
→
8
Contents/Precautions
Page 11
◆
Handling battery pack
■
Check that the battery type matches the type
displayed on the battery pack label.
Display Battery type
Li-ion 00 Li-ion battery
DANGER
Do not connect a wire or other metal objects
to the jack. And, do not carry or store the
FOMA terminal with objects like a metal
Don’t
necklace.
May cause battery pack to ignite, burst, heat or leak.
Check the orientation of the battery pack to
install it to the FOMA terminal, and do not try
to force the battery pack onto the FOMA
Don’t
terminal if you are having trouble installing it.
May cause battery pack to ignite, burst, heat or leak.
Do not throw the battery pack into the fire.
May cause battery pack to ignite, burst, heat or leak.
Don’t
Do not nail the battery pack, hit with a
hammer or step on it.
May cause battery pack to ignite, burst, heat or leak.
Don’t
If the battery pack's fluid etc. contacts eyes,
immediately flush the eyes with clean water
Do
and see a doctor right away. Do not rub the
eyes.
May cause loss of sight.
WARNING
If the battery pack seems to have
abnormalities such as deformation or
scratches due to falling, never use it.
Don’t
May cause battery pack to ignite, burst, heat or leak.
If the battery pack leaks or gives off a strange
smell, immediately remove it from the
Do
vicinity of open flames.
The vapors from leaking battery pack fluid may ignite
or explode.
Be careful not to let your pet bite the battery
pack.
May cause battery pack to ignite, burst, heat or leak.
Do
CAUTION
Do not discard old battery packs together
with other garbage.
May cause igniting or environmental destruction.
Don’t
Tape the terminals of old battery packs to insulate
them, and then bring them into a sales outlet such as
docomo Shop. If your local municipality has a battery
recycling program, dispose of them as provided for.
Do not use or charge a wet battery pack.
May cause battery pack to ignite, burst, heat or leak.
Don’t
If fluid etc. leaks out from the battery pack, do
not make the fluid contact with your skin of
Do
face or hands.
May cause loss of sight or skin problems.
If the fluid etc. put into your eyes or mouth, or contacts
skin or clothes, immediately flush the contacted area
with clean water.
If the fluid etc. put into the eyes or mouth,
immediately see a doctor after flushing.
9
Contents/Precautions
Page 12
◆
Handling adapter and desktop holder
WARNING
Do not use the adapter cord if it gets
damaged.
May cause fire, burns, electric shock.
Don’t
Do not use the AC adapter or desktop holder
in a bathroom or other highly humid area.
May cause fire, burns, electric shock.
Don’t
Always use the DC adapter with a negativeground vehicle. Do not plug it into a positiveground vehicle.
Don’t
May cause fire, burns, electric shock.
When it starts to thunder, do not touch
adapter.
May cause electric shock.
Don’t
Do not short the charging jack while it is
connected to the outlet or cigarette lighter
socket. Do not touch the charging jack with a
Don’t
part of your body such as your hand or finger.
May cause fire, burns, electric shock.
Do not place heavy objects on the adapter
cord.
May cause fire, burns, electric shock.
Don’t
When you insert and remove the AC adapter
from power outlet, do not contact a metal
strap or other metal objects with the jack.
Don’t
May cause fire, burns, electric shock.
Do not touch the adapter cord, desktop
holder or outlet with wet hands.
May cause fire, burns, electric shock.
No wet hands
Only use with the specified power source and
voltage. When charging the FOMA terminal
Do
overseas, use AC Adapter for global use.
If incorrect voltag e is used, this may cause fire, burns
or electric shock.
AC adapter : AC100 V
DC adapter : 12 or 24V DC (specific for negative
ground vehicle)
AC adapter for global use : Between 100V and 240V AC
(Connect to the AC outlet for internal household
use)
If the DC adapter's fuse blows, replace it only
with the specified fuse.
May cause fire, burns, electric shock. For the specified
Do
fuse, see the instructions that come with the DC
adapter.
Wipe off any dust that accumulates on the
power plug.
May cause fire, burns, electric shock.
Do
When you connect the AC adapter to an
outlet, firmly connect to the outlet.
May cause fire, burns, electric shock.
Do
When you disconnect the power plug from
the outlet or cigarette lighter socket, do not
Do
pull the adapter cord with excessive force.
Instead, hold the adapter to disconnect.
May cause fire, burns, electric shock.
Always remove the power plug from the
outlet or cigarette lighter when not using the
Unplug
adapter for an extended period.
May cause fire, burns, electric shock.
Immediately remove the power plug from the
outlet or cigarette lighter socket if water or
Unplug
other fluids get into the adapter.
May cause fire, burns, electric shock.
10
Contents/Precautions
Page 13
Always remove the power plug from the
cigarette lighter socket when cleaning the
Unplug
equipment.
May cause fire, burns, electric shock.
◆
Handling UIM
CAUTION
Be careful of the cut surface when removing
UIM.
May cause inju ries.
Do
◆
Handling mobile phones near
electronic medical equipment
■
These precautions are based on the guidelines
produced at the Electromagnetic Compatibility
Conference Japan, regarding the protection of
electronic medical equipment from radio waves
emitted by mobile phone units.
WARNING
Obey the following rules inside medical
facilities.
･
Do not bring the FOMA terminal into operating
Do
rooms (ORs), intensive care units (ICUs) or coronary
care units (CCUs).
･
Turn the FOMA terminal OFF in hospital wards.
･
Turn the FOMA terminal OFF in hospital lobbies and
corridors if electronic medical equipment could be
nearby.
･
If the medical facility has specified zones where use
or possession of mobile devices is prohibited, obey
those instructions.
Turn the FOMA terminal OFF in crowded
trains or other public places where
Do
pacemaker or defibrillator wearers could be
nearby.
The FOMA terminal's signals may affect the operation
of implanted pacemakers or defibrillators, and other
devices.
Wearers of implanted pacemakers or
defibrillators must carry and use the FOMA
Do
terminal at least 22 cm away from the
implanted device.
The FOMA terminal's signals may affect the operation
of implanted pacemakers or defibrillators, and other
devices.
When electronic medical equipment other
than implanted pacemakers or defibrillators
Do
are in use outside of medical facilities (such
as in home care settings), check with the
device manufacturer to determine how the
device is affected by electrical signals.
The FOMA terminal's signals may affect the
performance of electronic medical equipment.
11
Contents/Precautions
Page 14
◆
Material list
Part Material
Exterior
case
Display panel Hardened
Camera panel High-
IRDA panel PMMA
Flash panel PC resin None
Keypad Keypad top PC resin UV hard coating
Power key PC+ABS
Volume button PC+ABS
Strap plate Stainless
Front case PA+GF
Back case PC+ABS
Back cover PC-GF resin UV hard coating
Inside of
back cover
Keypad
guide
Light
shielding
sheet
Key rubber Silicon
resin
resin
Silicon
rubber
glass
strength
acrylate
resin
resin
PC resin UV hard coating
PET None
rubber
resin
resin
steel
Surface
treatment
UV hard coating
UV hard coating
None
Shatterproof film
UV hard coating
UV hard coating
None
UV hard coating
UV hard coating
None
Part Material
Strap fixation screw Stainless
RF jack cap Silicon
External
connection
jack cap
External connection jack Stainless
Battery
contacts
Screw (battery install
recess)
Battery install recess
face
Battery
pack
Charging
jack
UIM tray ABS resin None
Body PC resin UV hard coating
Flexure Elastomer
Water stop PC resin None
Water stop
rubber
Body LCP resin None
Contacts Copper-
Battery pack PC resin None
Contacts Beryllium
Contacts Stainless
Attaching
holder
section
steel
rubber
resin
Silicon
rubber
steel
titanium
alloys
Stainless
steel
PC board Gold plating
copper
steel
LCP resin None
12
Surface
treatment
None
None
None
None
Tin plating
Gold plating
None
Gold plating
Gold plating
Contents/Precautions
Page 15
Handling precautions
◆
General
・
F-12C is waterproof, however, do not allow water to
seep into the FOMA terminal and do not allow
accessories or optional devices to get wet.
- Battery pack, adapter, desktop holder, UIM are not
waterproof. Do not use in a bathroom or other highly
humid area or do not let rain attached. Or putting the
terminal on your body, humidity of sweat may cause
internal corrosion and malfunction. Note that
malfunctions, which are determined to be caused by
water as result of inspections, are not covered by the
warranty. Since these conditions are outside the scope
of the warranty, a repair, if at all possible, is charged.
・
Clean the FOMA terminal with a dry soft cloth (such as
a cloth for eyeglasses).
- Rubbing it roughly with a dry cloth may scratch the
display.
- Drops of water or dirt left on the display may cause
stains.
- If the FOMA terminal is wiped with alcohol, paint
thinner, benzine or detergent, the printing may
disappear or color may fade.
・
Clean the jack occasionally with a dry cotton swab etc.
- If the jack is soiled, connection gets worse and it may
cause power to be turned off or insufficient battery
charge, so clean the jack with a dry cotton swab etc.
Also, be careful never to damage the jack when
cleaning it.
・
Do not place the FOMA terminal near an air-conditioner
outlet.
- The rapid change in temperature may cause
condensation, causing internal corrosion and
malfunction.
・
When using, be careful not to subject excessive force to
the FOMA terminal or the battery.
- If the FOMA terminal is crammed into a brimming bag
or placed in a pocket and sat on, display, internal PCBs
or battery pack may be damaged or malfunction. And,
if external devices are plugged into the external
connection jack or the stereo earphone jack, the
breakage of the connector or malfunction may result.
・
Do not rub or scrape the display with a metal piece etc.
- May scratch the display, causing malfunction or
damage.
・
Carefully read the separate instructions that come with
the battery pack and adapter.
◆
FOMA terminal
・
Do not press the surface of the touch panel strongly or
operate it with sharp objects such as a nail, a ballpoint
pen and a pin.
- It may damage the touch panel.
・
Avoid extreme temperature.
- Use the FOMA terminal where the temperature ranges
between 5 and 40℃ (limited to the temporary use in a
bathroom etc. when temperature is above 36℃) and
humidity ranges between 45 and 85%.
・
The FOMA terminal may affect land-line phones, TVs or
radios in use nearby, so use it as far as possible from
these appliances.
・
Maintain a separate record of the data you saved in the
FOMA terminal.
- If the data is deleted, DOCOMO assumes no
responsibility for the loss of any data.
・
Do not drop the FOMA terminal or subject it to shocks.
- May cause malfunction or damage.
・
Do not plug external devices into the external
connection jack or stereo earphone jack at a slant, or do
not pull it forcibly while it is plugged.
- May cause malfunction or damage.
・
It is normal for the FOMA terminal to become warm
during use or charging. Continue to use it.
13
Contents/Precautions
Page 16
・
Do not leave the FOMA terminal with the camera in
areas under strong direct sunlight.
- May cause discoloring or burn-in of elements.
・
Use the FOMA terminal with the external connection
jack cap closed.
- Dust and/or water brought into the FOMA terminal
cause troubles.
・
Do not use the FOMA terminal with the back cover
removed.
- May cause removal of battery pack, malfunction or
damage.
・
While microSD card is being used, do not take the card
out and do not turn off the FOMA terminal.
- May cause data loss or malfunction.
・
Do not bring magnetic cards etc. close to FOMA
terminal.
- Magnetic data in cash cards, credit cards, telephone
cards, floppy disks, etc. may be erased.
・
Do not bring magnetized objects close to the FOMA
terminal.
- Bringing strong magnetism close may cause a
malfunction.
◆
Battery pack
・
The battery pack is a consumable part.
- Replace the battery pack if the FOMA terminal has
extremely short operation time on a full charge,
though it may vary by operating conditions. Purchase
a new battery pack of the specified type.
・
Charge the battery in an area within the proper ambient
temperature range (5-35℃).
・
The operation time provided by the battery pack varies
by the operating environment and battery pack's
deterioration.
・
The battery pack may swell out as it comes to near the
end of its lifetime depending on the usage conditions,
but it is not a problem.
・
Be careful especially about the following points when
preserving the battery pack.
- Keeping under the state of the full charge (right after
charging ends)
- Keeping under the state of the empty charge (too
exhausted to turn on the FOMA terminal)
They may cause the battery pack performance to be
degraded or its lifetime to be shortened.
A recommended battery level to keep the battery pack is
approximately 40 % of remaining battery level as a
guide.
◆
Adapter
・
Charge the battery in an area within the proper ambient
temperature range (5-35℃).
・
Do not charge the battery in the areas below.
- In areas of excessive humidity, dust or vibrations
- Near land-line phones or TVs/radios
・
It is normal for the adapter to become hot while
charging. Continue to use it.
・
When using the DC adapter for charging, keep the
vehicle engine running.
- The vehicle's battery could become flat.
・
When using an outlet with a mechanism preventing
unplugging, follow the handling instructions for that
outlet.
・
Do not give strong shock. Do not deform the charging
jack.
- May cause malfunction.
◆
UIM
・
Do not use excessive force to install/remove UIM.
・
Note that DOCOMO assumes no responsibility for
malfunctions occurring as the result of inserting and
using UIM with another IC card reader/writer.
・
Always keep UIM ICs clean.
・
Clean UIM with a soft, dry cloth (such as a cloth for
eyeglasses).
14
Contents/Precautions
Page 17
・
Maintain a separate record of the data you saved in
UIM.
- If the data is deleted, DOCOMO assumes no
responsibility for the loss of any data.
・
To preserve the environment, bring the old UIM to a
sales outlet such as docomo Shop.
・
Take care not to scratch, touch accidentally or short IC.
- May cause data loss or malfunction.
・
Do not drop UIM or subject it to shocks.
- May cause malfunction.
・
Do not bend UIM or place heavy objects on it.
- May cause malfunction.
・
Do not install UIM into the FOMA terminal with a label
or sticker put on.
- May cause malfunction.
◆
Bluetooth devices
・
This FOMA terminal is equipped with the security
features, that are compliant with Bluetooth standards
for communication via Bluetooth. However, depending
on the settings, there may not be enough security. Be
aware of security risks when using Bluetooth.
・
DOCOMO assumes no responsibility for any
information which may be leaked during
communication via Bluetooth.
・
You can use headset, handsfree, audio, keyboard, data
transfer, and serial port with the FOMA terminal. An
audio/video remote control may be available with an
audio device (only compatible Bluetooth devices).
・
Frequency bands
Frequency bands used by the FOMA terminal Bluetooth
function are as below.
abdc
2.4FH1
a
2.4 : Radio equipment that uses the 2400 MHz band.
b
FH : The modulation is the FH-SS method.
c
1 : The expected interference distance is 10 m or
shorter.
d
and 2483.5 MHz are used, and the bandwidth used by
mobile object identification devices cannot be
avoided.
Cautions on using Bluetooth devices
In the bandwidth used by this terminal, in addition to
home electric appliances such as a microwave oven
and industrial/scientific/medical devices, in-plant
radio stations used to identify mobile objects used in
production lines of a factory that require a license,
specified low power radio stations, or amateur radio
stations that do not require a license (hereafter "other
radio stations") can be in operation.
1. Before using this terminal, check whether other
radio stations are in operation in your
neighborhood.
2. If radio wave interference occurs between the
terminal and "other radio stations", use the
terminal in a different location or "Turn the power
OFF" to avoid the radio wave interference.
3. For details, contact "General Inquiries" on the last
page of this manual.
◆
Wireless LAN (WLAN)
・
Wireless LAN (WLAN) exchanges information using
radio waves, and allows you to freely establish LAN
connection if you are within an area where radio wave
reaches. On the other side, if you communicate without
appropriate security settings, communications may be
intercepted or hacked by malicious parties. It is
recommended to make necessary security settings on
your judgement and responsibility.
: All bandwidths between 2400 MHz
15
Contents/Precautions
Page 18
・
Wireless LAN
Do not use Wireless LAN in a place where magnetized b y
electric products, AV, OA equipment, etc. or where
electromagnetic wave is generated.
- If magnetism or electrostatic noise affects the FOMA
terminal, noise may be increased or communication
may not be available (especially when using
microwave oven, it may affect the terminal).
- Using near TV or radio may cause poor reception or TV
screen may be blurred.
- When multiple wireless LAN access points exist near
the FOMA terminal and they use the same channel,
search may not be performed correctly.
・
Frequency bands
Frequency bands for WLAN devices are written on
battery pack insert section of phone. Label description
are as follows.
a bc
d
2.4DS/OF4
a
2.4 : Radio equipment that uses the 2400 MHz band.
b
DS : The modulation is the DS-SS method.
c
OF : The modulation is the OFDM method.
d
4 : The expected interference distance is 40 m or
shorter.
e
and 2483.5 MHz are used, and the bandwidth used by
mobile object identification devices can be avoided.
Available channel varies by countries. To use WLAN
overseas, check the conditions such as available
frequency, regulation, etc. for the country.
To use in airplane, confirm with airline company in
advance.
e
: All bandwidths between 2400 MHz
Cautions on using 2.4 GHz devices
In the bandwidth used by WLAN devices, in addition
to home electric appliances such as a microwave oven
and industrial/scientific/medical devices, in-plant
radio stations for identification of mobile objects used
in production lines of a factory (a license is required),
specified low power radio stations (a license is not
required), or amateur radio stations (a license is
required) can be in operation.
1. Before using this device, confirm that in-plant radio
stations for identification of mobile objects,
specified low power radio stations or amateur
radio stations are not in operation in your
neighborhood.
2. If this device generates harmful radio wave
interference against in-plant radio stations for
identification of mobile objects, change the using
frequency promptly or stop using wireless LAN
function, and contact "General Inquiries" on the last
page of this manual, then consult about treatment
for prevention of the interference (for example,
installation of partitions etc.).
3. If this device generates harmful radio wave
interference against in-plant radio stations for
identification of mobile objects or amateur radio
stations, or if any trouble, contact "General
Inquiries" on the last page of this manual.
◆
FeliCa reader/writer
・
FeliCa reader/writer function of the FOMA terminal
uses weak waves requiring no licenses for radio
stations.
・
It uses 13.56 MHz frequency band. When using other
reader/writers in your surroundings, keep the FOMA
terminal away sufficiently from them. Before using the
FeliCa reader/writer, confirm that there are no radio
stations using the same frequency band nearby.
16
Contents/Precautions
Page 19
◆
CAUTION
・
Do not use a remodeled FOMA terminal. Using a
remodeled terminal violates the Radio Law.
The FOMA terminal is certified according to technical
standard conformance of specified wireless equipment
based on the Radio Law, and as a proof of it, the
"Technical Compliance Mark " is depicted on the
engraved sticker of the FOMA terminal.
If you remodel the FOMA terminal by removing its
screws, your certification of technical standard
conformance becomes invalid.
Do not use the FOMA terminal with its certification of
technical standard conformance invalid as it violates the
Radio Law.
・
Be careful when you use the FOMA terminal while
driving a car etc.
Using a mobile phone while driving is subject to penal
regulations.
However, absolutely necessary cases such as rescue of
a sick person or maintaining public's safety are
exempted.
・
Use the Bluetooth function only in Japan.
The Bluetooth function of the FOMA terminal is
compliant with wireless standards and is authorized for
use only in Japan.
If you use this function overseas, you may be punished.
・
Use FeliCa reader/writer function only in Japan.
FeliCa reader/writer function of the FOMA terminal
conforms to Japanese radio standards.
If you use this function overseas, you may be punished.
Waterproofness
F-12C provides waterproofness of IPX5*1, IPX8*2 with
firmly closing the external connection jack cap and
steadily installing the back cover.
*1
IPX5 means that a phone keeps functioning after applying a
jet flow of 12.5 L/min. from every direction from a distance of
approximately 3 m for at least 3 minutes using water nozzle in
6.3 mm inner diameter.
*2
For F-12C, IPX8 means that a phone keeps functioning after
F-12C is slowly submerged to depth of 1.5 m in static tap
water at room temperature, left there for 30 minutes and then
taken out. (Camera function cannot be used under water.)
❖
What you can do with waterproofness
of F-12C
・
You can talk without using an umbrella in the rain (for
rainfall of 20 mm or less per hour).
- When your hands or the FOMA terminal are wet, avoid
installing/removing the back cover or opening/closing
the external connection jack cap.
・
The FOMA terminal can be submerged into a pool
which has a depth of 1.5 m.
- Do not operate under water.
- If you put the terminal in water of swimming pool, be
sure to have it within 30 minutes.
- If the FOMA terminal gets wet with water from the
swimming pool, wash it in following procedure and
drain water in specified procedure (→P19).
・
You can use the FOMA terminal in a bathroom.
- Do not put the terminal in the bathtub. Do not use the
terminal in hot water. May cause malfunction.
- Never put the FOMA terminal in hot spring water or
water containing soap, detergent or bath powder.
17
Contents/Precautions
Page 20
・
You can eliminate the dirt by shaking several times in
static water of wash-basin.
- With the back cover steadily attached and pressing and
holding the external connection jack cap not to open,
wash the terminal without using a brush or sponge.
◆
To ensure waterproofness
To avoid water ingress, be sure to observe the following
points.
・
Do not throw any liquid other than room-temperature
tap water on the FOMA terminal, or soak it in such liquid.
・
When using the external connection jack, pull the cap up
with your finger by the groove as shown in the
illustration.
Groove
After using the external connection jack, close the cap as
the direction shown in the illustration, and make sure
that the cap is completely closed without slack by
pushing the tab in.
Groove
・
For installing the back cover, see de in "Attaching
battery pack" of "Attaching/Removing battery pack".
P25
・
Steadily attach the back cover without any space
between and firmly close the external connection jack
cap. Even a fine obstacle (one hair, one grain of sand,
tiny fiber, etc.) put between contact surfaces may allow
water to enter.
・
Do not poke the microphone, earpiece or speaker with a
swab or sharp object.
・
Do not let the FOMA terminal fall. It may become
scratched causing the waterproof performance to
degrade.
・
The external connection jack cap and the rubber packing
of the rear side of the back cover play important roles for
keeping waterproof performance. Do not deform the
back cover by twisting etc. or peel off or damage the
rubber packing. Also, prevent dust from adhering to it.
To keep the FOMA terminal waterproofness,
replacement of parts is required every 2 years
regardless of whether the FOMA terminal appears
normal or abnormal. DOCOMO replaces the parts as a
chargeable service. Bring the FOMA terminal to a
sales outlet such as a DOCOMO-specified repair
office.
→
18
Contents/Precautions
Page 21
◆
Important precautions
Do not perform actions shown in the illustrations below.
<Example>
Using Soap/Detergent/
Bath powder
Observe the following precautions to use the FOMA
terminal properly.
・
Accessories and optional devices are not waterproof.
When playing a moving picture etc. with the FOMA
terminal installed in the included desktop holder, do not
use it in a bathroom, shower room, kitchen or lavatory
even if it is not connected to the AC adapter.
・
Do not apply water flow stronger than allowed (→P17)
(e.g., such water flow that gives you pain when applied
to your skin directly from a faucet or shower). F-12C
provides IPX5 waterproof performances. However, it
causes malfunction.
・
Do not put the FOMA terminal in hot water, use it in a
sauna or apply hot airflow (from a hair dryer etc.) to it.
・
Do not move the FOMA terminal in water or slam the
terminal against the surface of water.
・
If you put the terminal in tap water or in water of
swimming pool, be sure to have it within 30 minutes.
・
When you use the terminal in swimming pool, obey
rules of the facility.
・
The FOMA terminal does not float on water.
・
Do not leave water on the FOMA terminal. May shortcircuit the power jacks, or in a cold region, water may
freeze causing malfunction.
Washing with brush/
Soaking in
ocean water
sponge
Using in hot spring
Machine-washing
Applying strong
water flow
Attaching sand/mud
・
Do not leave water on the microphone, earpiece or
speaker. Such water may interfere with talking.
・
If the back cover is damaged, replace it. Water may enter
inside from a damaged section causing troubles such as
electric shocks or corrosion of the battery.
・
If the FOMA terminal gets wet with water or other liquids
with the external connection jack cap or the back cover
open, the liquid may get inside the terminal causing
electric shocks or malfunction. Stop using the FOMA
terminal, turn the power OFF, remove the battery pack
and contact a DOCOMO-specified repair office.
・
If the external connection jack cap, or the rubber gasket
on the rear side of the back cover is damaged or
deformed, replace it at DOCOMO-specified repair office.
DOCOMO does not guarantee actual operations under
all states. Malfunctions deemed to be caused by
inappropriate operation by the customer are not
covered by the warranty.
◆
Draining water from the FOMA
terminal
When the FOMA terminal is wet, water may flow out after
wiping it off; drain the water in the following steps.
a
Hold the FOMA terminal firmly and wipe off moisture
on the FOMA terminal surface and back side with dry,
clean cloth etc.
19
Contents/Precautions
Page 22
b
Shake the FOMA terminal approximately 20 times,
firmly holding it, until there is no more water
splattering.
c
Swing the FOMA terminal in about 10 times against
dry, clean cloth etc. to wipe off water remaining in the
microphone, earpiece, speaker, keypad, or charging
jack, etc.
d
Wipe off water drained from the FOMA terminal with
dry, clean cloth etc., and dry naturally.
･
Water, if any, remaining in the FOMA terminal may
ooze up after wiping off.
･
Do not wipe off water remaining in gaps directly with
a cotton swab etc.
◆
Charging
Check the following before and after charging.
・
Check if the FOMA terminal is not wet. Never try to
charge the battery pack when the FOMA terminal is wet.
・
Accessories and optional devices are not waterproof.
・
When charging the battery when or after the FOMA
terminal is wet, adequately drain it and wipe off water
with a dry, clean cloth etc., before connecting the
accessory desktop holder or opening the external
connection jack cap.
・
When the external connection jack cap is opened for
charging, close the cap firmly after charging. It is
recommended to use the desktop holder for charging to
prevent water from seeping inside from the external
connection jack.
・
Do not use the AC adapter or desktop holder in a
bathroom, shower room, kitchen, lavatory or other
highly humid area. May cause fire or electric shock.
・
Do not touch the AC adapter or desktop holder with wet
hands. May cause electric shock.
20
Contents/Precautions
Page 23
Before using the FOMA terminal
Part names and functions
a
b
c
a
d
e
k
l
m
e
n
o
b
c
d
f
g
h
i
j
p
q
r
s
21
<Functions>
a
Earphone/Microphone jack (waterproof)
Connect a commercially available stereo earphone.
b
Proximity sensor
Prevents the erroneous operation of the touch panel
during a call.
*
Putting a protective sheet or seal on the proximity sensor may
cause erroneous operation.
c
Notification LED
Red light : Charging (except when flashing green)
Flashing green : Receiving a call, notifying missed calls,
incoming/unread mails, etc.
Green light once : Power ON
d
Display (Touch panel)
Touch with your finger to display operations or
information about functions.
e
Microphone
Transmit your voice, microhphone for recording voice.
f
External connection jack
Connect the included the FOMA charging microUSB
adapter T01 or FOMA USB Cable for PC connection T01.
g
GPS antenna
*
The antenna is built-in the FOMA terminal. Covering around
the antenna by the hand may affect the quality.
h
Earpiece
Hear the other party's voice
i
Light sensor
Sense ambient brightness and automatically adjusts
brightness of the display backlight.
*
When the sensor is covered, adjustment may not be
performed properly.
j
Key backlight
If the light sensor senses the terminal is in dark place,
backlight is turned on when the lock screen is displayed
or the key is pressed on the Home screen or
Applications menu.
*
The key backlight may not be turned on if you press the key
in light place, soon move to dark place and then press the
key. In that case, wait for a certain period of time and try to
press the key again.
Before using the FOMA terminal
Page 24
k
mark
Installation of IC card
*
Place mark over the IC card reader to use Osaifu-Keitai,
or if you download compatible applications, you can send
and receive data via iC transmission. IC card cannot be
removed.
l
Speaker
When playing back ring alert or music, or using speaker
phone, hear the other party's voice from here.
m
Infrared data port
n
Strap hole
o
FOMA antenna
*
The antenna is built-in the FOMA terminal. Covering around
the antenna by the hand may affect the quality.
p
Camera
Record still images or moving pictures
q
Camera light
Light as a flashlight when shooting
r
Back cover
*
To access UIM slot and the microSD card slot, remove the
back cover and the battery pack.
*
Rubber gasket is attached on the rear side of the back cover to
resist water .
s
Charging jack
Use the jack to charge through the included desktop
holder.
<Key functions>
Key functions are as follows.
a
Power key
X
Press : Activate/Deactivate Sleep mode
Press and hold : Turn power on, activate/deactivate
Manner mode, Public mode, Airplane mode, turn
power off, restart the terminal
b
Menu key
m
Press : Display currently available options menu
Press and hold for 1 second or more : Switch display/
not display the software keyboard when entering
characters
c
Home key
B
Press : Return to the home screen
Press and hold for 1 second or more : Display the
recently used applications
d
Back key
c
Press : Return to the previous screen
e
Volume button
Press : Adjust the call volume, alert volume and media
playback volume
Press and hold D for 1 second or more : Activate/
Deactivate manner mode
SD
22
Before using the FOMA terminal
Page 25
UIM
The UIM is a card that can record user information such as
your phone number etc.
･
When UIM is not inserted to the FOMA terminal
correctly, or UIM is abnormal, you cannot make/receive
a call or send/receive a mail.
･
With the FOMA terminal, a phone number cannot be
saved to UIM.
･
For details on UIM, refer to the UIM manual.
◆
Installing/Removing UIM
･
Turn the FOMA terminal OFF, remove the back cover
and the battery pack before installing/removing UIM.
P24
❖
Installing UIM
Insert UIM into the guide with the IC side
1
facing down
･
Check the orientation of UIM corner cut.
Corner cut
IC
Guide
❖
Removing UIM
Press the lock with your finger (a) and pull
1
UIM out 2-3 mm toward
b
→
UIM
Lift your finger from the lock, press UIM
2
lightly and slide it toward
･
Do not press UIM downward forcefully.
b
✔
INFORMATION
･
When handling UIM, take care not to touch or scratch the
IC part. Note that inserting UIM forcibly into FOMA
terminal may damage UIM.
◆
Security codes of UIM
There are two security codes, "PIN1 code" and "PIN2 code",
for UIM. Both codes are set to "0000" at subscription,
which you can change by yourself.→P48
Lock
b
a
23
Before using the FOMA terminal
Page 26
microSD card
◆
microSD card
Install microSD card or microSDHC card in the FOMA
terminal before use. If not installed, some functions such
as camera, music, m oving pictures (playback or downl oad)
are not available.
･
The FOMA terminal supports microSD card of up to 2
Gbytes, and microSDHC card of up to 32 Gbytes (as of
July, 2011). Note that DOCOMO does not guarantee
actual operations of all microSD cards and microSDHC
cards.
･
Do not turn the power OFF or give shock while accessing
data on the microSD card. The data may corrupt.
◆
Installing/Removing microSD card
･
A microSD card (sample) is inserted when purchased.
Before using, refer to the instruction manual for
microSD card (sample).
❖
Installing microSD card
a
With the metal contacts side facing down, insert a
microSD card at the orientation shown until it locks
❖
Removing microSD card
a
Push microSD card lightly (a), and then release it
b
Pull the microSD card straight out (b)
b
a
✔
INFORMATION
･
Note that the microSD card may pop out of the FOMA
terminal when removing it.
Battery pack
◆
Attaching/Removing battery pack
･
Attach/Remove the battery pack after turning OFF the
power.
･
When you attach/remove the back cover, hold the FOMA
terminal in your hand so that you will not scratch the
display etc.
･
If the FOMA terminal gets wet, wipe off water before
removing the back cover.
･
Use Battery back F21 dedicated to the FOMA terminal.
24
Before using the FOMA terminal
Page 27
❖
Attaching battery pack
a
Put your fingernail into the back cover removing part
d
Check the orientation of the back cover, and attach it
fitting to the FOMA terminal
e
Fit the tabs on the reverse side of the back cover with
the grooves on the FOMA terminal, press firmly to
close
･
Check if there is no gap at all in order to maintain
waterproofness, and attach securely.
*
"Waterproofness"→P17
b
Lift the back cover vertically in the direction of the
arrow and take up to remove
･
To ensure waterproofness, the back cover is
structured to attach firmly. If you have difficulties to
remove, remove it strongly.
c
With the battery pack label facing up, align the metal
contacts of the battery pack with those of the FOMA
terminal, insert in the direction of the a to attach in
the direction of
b
Back cover removing part
b
a
❖
Removing battery pack
a
Perform a and b on Attaching the battery pack
b
Pinch the tab of battery pack and pick it up in the
direction of the arrow to remove
25
Before using the FOMA terminal
Removing tab
Page 28
Charging
The battery pack does not have a full charge at time of
purchase. Charge the battery before using the FOMA
terminal.
❖
Precautions on charging
Make sure to install the battery pack into the FOMA
terminal before charging.
･
If you use the FOMA terminal while charging, it may take
time to complete charging or charging may not
complete. If you perform functions that consume a large
amount of power, such as data communications or calls
consecutively, the battery may be reduced continuously,
causing it to go dead even while charging.
･
It is normal for the FOMA terminal or AC adapter to
become warm while charging. When the FOMA terminal
becomes warm, charging may stop temporarily for the
safety. When the FOMA terminal becomes extremely
hot, stop using immediately.
･
The following conditions will lead to a charging error. In
the case of charging error, running functions are
stopped, the power is turned off, and the notification
LED lights red. Remove the charger or battery pack.
- Charging voltage is high
- The battery pack is over-charged/over-discharged
- Charging is not complete after 5 hours or more
❖
Charging times (approximate)
The following is the time for charging an empty battery
pack with F-12C's power switched OFF. Charging with the
terminal ON or under low temperature requires longer
time.
AC adapter
FOMA charging microUSB adapter T01
: Approx. 180 min.
Using desktop holder : Approx. 240
min.
DC adapter
❖
Operation time on full charge
FOMA charging microUSB adapter T01
: Approx. 180 min.
Using desktop holder : Approx. 240
min.
(approximate)
The following time varies by the charging method and
operating environment.→P130
Continuous
stand-by
time
Continuous
call time
❖
･
･
･
FOMA/3GStationary (Auto) : Approx. 450 H
Moving (Auto) : Approx. 380 H
Moving (3G static) : Approx. 380 H
GSM
Stationary (Auto) : Approx. 290 H
FOMA/3GApprox. 320 min.
GSM
Approx. 350 min.
Battery pack life
The battery pack is a consumable part. Each time it is
charged, time available with each charging reduces.
Talking on the phone for a long time while charging may
reduce the battery pack lifetime.
When a time available with each charging is reduced to
about a half from that of a new battery, replacement of
the battery is recommended because it is near the end of
life. The battery pack may swell out as it comes to near
the end of its lifetime depending on the usage
conditions, but it is not a problem.
To promote environmental conservation, return your
used battery pack to NTT DOCOMO sales outlets, our
corporate agencies or the shops that collect used battery
pack in your community.
26
Before using the FOMA terminal
Page 29
❖
Available charging adapter
For details, refer to the operation manual of AC adapter or
DC adapter.
FOMA AC Adapter 01 (optional) :
FOMA AC Adapter 02/FOMA AC Adapter 01 for Global use
(optional) :
Between AC 100V and 240V AC Adaptor has
a plug dedicated to AC 100V (for domestic use). When
using the AC adapter in the range of AC 100V and 240V
overseas, a conversion plug adapter applicable to the
country you are staying is required. Also, do not charge
the battery with a transformer for overseas travel.
FOMA DC Adapter 01/02 (optional) :
car.
❖
Checking battery level
A battery icon is displayed on the status bar to show
estimated battery level.→P31
･
When the battery level is nearly empty, a warning
message appears, and power is turned off after a few
seconds.
･
From the Home screen, m→
phone]→[Status] to check the remaining battery power
by percentage.
✔
INFORMATION
･
When charging starts with the battery empty, the FOMA
terminal may not be immediately activated after turning
the power ON. In this case, charge the FOMA terminal
while keeping it turned OFF, and turn it on after a while.
◆
Charging with Desktop holder
Charge the FOMA terminal with FOMA AC Adapter 01/02
(optional), the included FOMA charging microUSB adapter
T01 and Desktop Holder F34.
a
Insert the AC adapter connector to the external
connection jack of the FOMA charging microUSB
adapter
b
Insert the microUSB plug of the charging microUSB
adapter into the jack on the back side of the desktop
holder
AC 100V only
Use for charging in a
Tap [Settings]→[About
c
Unfold the AC adapters power plug and insert it into a
100V AC outlet
d
Insert the FOMA terminal into the desktop holder
･
Notification LED lights red while charging, and turns
off when charging is complete.
e
When charging is complete, remove the FOMA
terminal from the desktop holder
f
Remove the micro USB plug of the charging microUSB
adapter from the desktop holder, and remove the AC
adapter connector from the external connection jack of
the charging microUSB adapter
･
Pull it straight while pressing the release button of
the connector.
g
Remove the AC adapter power plug from the wall outlet
Notification LED
Desktop holder
27
Insert into the back side
microUSB plug
Power plug
AC adapter
Connector
FOMA charging microUSB adapter T01
Before using the FOMA terminal
Release
buttons
External
connection jack
AC 100V
outlet
Page 30
◆
Charging with AC adapter
Charge the FOMA terminal with FOMA AC Adapter 01/02
(optional) and the included FOMA charging microUSB
adapter T01.
a
Insert the AC adapter connector to the external
connection jack of the FOMA charging microUSB
adapter
b
Open the jack cap (a) of the FOMA terminal, insert the
microUSB plug of the charging microUSB adapter into
the jack (b)
c
Insert the AC adapter power plug into an outlet
･
Notification LED lights red while charging, and turns
off when charging is complete.
d
After charging is completed, remove the microUSB
plug from the FOMA terminal, and close the external
connection jack cap
e
Remove the AC adapter connector from the charging
microUSB adapter
･
Pull it straight while pressing the release button of
the connector.
f
Remove the AC adapter power plug from the wall outlet
External connection jack
Notification LED
AC adapter
Power plug
AC 100V
outlet
microUSB
plug
FOMA charging
microUSB
adapter T01
Jack cover
External connection
jack
Connector
Release buttons
✔
INFORMATION
･
FOMA charging microUSB adapter T01 is an adapter for
connecting the FOMA terminal with the AC adapter. If you
connect the FOMA terminal with a PC using the FOMA
USB Cable etc., you cannot send/receive data or charge
the FOMA terminal. For connection to a PC, use the
included FOMA USB Cable for PC connection T01.
◆
Charging with FOMA USB Cable for
PC connection
If you connect the FOMA terminal with a PC using the
included FOMA USB Cable for PC connection T01, you can
charge the FOMA terminal.
･
When "
新しいハードウェアの検索ウィザードの開始
hardware detection wizard)" appears on the PC, select "
キャンセル
(Cancel)".
(New
Turning power ON/OFF
◆
Turning power ON
Press and hold X (approx. 2 sec.) until the
1
notification LED lights green
The lock screen appears following the startup screen.
Slide at the bottom of the lock screen
2
right or left
･
Lock screen→P33
28
Before using the FOMA terminal
Page 31
❖
Turning power ON for the first time
When you turn power ON for the first time, tap [OK] on the
confirmation screen for software update to make initial
settings from "
made can be changed later.→P31
1
2
◆
1
2
はじめに
(Getting started)". The settings
[設定 (Setting)] on each item→Follow the
screen to set items
When settings are complete, B or c
on "
はじめに
(Getting started)"
Turning power OFF
Press and hold X until the phone options
menu appears
[Power off]→[OK]
After vibrating once, the terminal turns off.
Basic operation (Using touch panel)
The FOMA terminal display is composed of a touch panel
designed for being touched directly with fingers. The
FOMA terminal supports a motion sensor that senses the
orientation or motion of the terminal. You can switch the
display view by tilting the FOMA terminal vertical or
horizontal.
◆
Notes for using the touch panel
The touch panel is designed for being touched lightly with
fingers. Do not push it forcibly with a finger or press it with
sharp objects (nail, ballpoint pen, pin, etc.).
･
Touching the touch panel may not work in the following
cases. Note that it may cause malfunction.
- Operation with gloved hands
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the display
- Operation with wet hand
- Operation under water
◆
Main operations
❖
Tap/Touch and hold for 1 second or
more
Tap :
Tap an item or icon on the screen with your finger
lightly. The operation becomes effective when you
release your finger from the display.
Double-tap :
Touch and hold for 1 second or more* :
*
29
Tap twice quickly. By double-tapping you can
zoom in/out the screen such as web page or still image.
item or icon on the screen with your finger for 1 second
or more and release it. The operation becomes effective
when you release your finger from the display. You may
need to perform another operation without releasing
your finger after touching and holding for 1 second or
more for some operations.
In this manual, the operation may be described as "(1 sec. or
more)".
Example : Tap
Before using the FOMA terminal
Touch and hold an
Page 32
❖
Slide/Flick
Slide :
Touch the screen and drag to the desired position.
Flick :
Flick your finger right or left on the screen. Switch
screens back and forth when viewing several pages or
data.
Example : Slide
❖
Pinch
Touch the screen with two fingers and widen (pinch-out)
or narrow (pinch-in) the fingers' distance.
･
This operation is mainly for zooming in/out the screen
such as web page or still image.
❖
Drag
Touch an item or icon on the screen and move it to the
desired position.
❖
Pan
Drag the screen in some direction to view the desired part.
･
The operation is used when displaying in a single view
is not available, such as viewing a web page, Office file,
or enlarged still image etc.
❖
Scroll
Slide or flick the screen up and down/right and left to view
hidden parts.
･
The operation is used when whole contact list or
application list can not be displayed in a single view.
30
Before using the FOMA terminal
Page 33
◆
Switching between landscape and
portrait view
You can switch between landscape and portrait view by
turning the FOMA terminal sideways/upright.
･
Even when you change the orientation of the FOMA
terminal, the screen may not change depending on the
screen displayed.
Initial setting
Screen/Icon
◆
Icons on the status bar
Various conditions can be checked with notification icons
and status icons appearing on the status bar.
Notification icon Status icon
Status bar
You can set necessary items collectively for the first time
to use the FOMA terminal.
･
Each setting can be changed anytime.
From the Home screen, m→
1
[Initial setting]
Set each item
2
Pedometer :
Voice adjust :
Lock screen:
HOME wallpaper :
Photo Screen :
Copy phonebook :
Google Accounts :
❖
About other initial settings
Set the following items as required in addition to the initial
setting items.
･
Email account settings→P80
･
Wi-Fi functions settings→P65
･
Access point (APN) settings→P63
･
Switching to English display→P76
Set information for using Pedometer.
P79
adjust.
→
Set age information for using Voice
Set screen lock.→P49
P35
Set wallpaper on the Home screen.
Set an image for lock screen.
Copy phonebook.→P57
Set Google Account.
[Settings]
→
→
■
Main notification icons
: New Gmail message
: New Email message
: New sp-mode mail
: New SMS, Area Mail
: Sending SMS is failed
：
Voice Mail message
: New instant message
: Notifying calendar
：
During alarm snooze
: Playing a track
: Problem with synchronization
: Wi-Fi is on, and Wi-Fi network is available.
: Wi-Fi tethering is enabled.
: File received via Bluetooth
: USB is connected.
: Calling
: Missed call
: Call on hold
: Uploading data is completed.
: Downloading dada is completed.
: Installing applications from Android Market etc. is
completed.
: Updating Android Market applications is available.
: Hidden notification
: microSD card is not inserted.
31
Before using the FOMA terminal
Page 34
: microSD card is unmounted.
: Earphone is connected (terminal microphone).
: Earphone is connected (earphone microphone).
： Notification icon (software update available)
： Notification icon (software update completed)
■
Main status icons
*
: Signal strength
*
: During roaming
: Out of service area
* /*
(gray arrow) : GPRS connected/in use
* /*
(gray arrow) : 3G (packet) connected/in use
: Airplane mode
*
: Wi-Fi is connected.
: Bluetooth function is ON.
: Bluetooth device is connected.
: During Data synchronization
: Osaifu-Keitai lock is set.
: UIM is not inserted.
: Alarm is set.
: Speaker phone is ON.
: Microphone is muted.
: Ringtone volume 0
: Vibration mode is ON.
: Public mode (Drive mode)
: Manner mode
: Manner (silent)
: Manner mode (alarm)
: Personalized manner mode
: Charging is needed.
: Battery level is low.
: Battery level is enough.
: Charging
: Positioning with GPS
: ATOK kana input mode
: ATOK alphanumeric input mode
: ATOK number input mode
: Input ATOK pictogram/smiley/symbol, phrase,
character code.
*
Displayed in green when sign into a Google account.
◆
Notification panel
When a notification icon appears, you can open the
Notification panel to check information on messages or
schedule etc.
❖
Opening the Notification panel
Drag the status bar downward
1
Setting buttons
Notifications
･
Tap each notification to check the detailed or make
necessary settings.
･
Tap [Clear] to delete on the notification panel. However,
some notification may be deleted depending on the
content.
･
Tap each setting button to switch ON/OFF of Wi-Fi,
Bluetooth function, GPS or manner mode. When set to
ON, color of the buttons turns into yellow green.
✔
INFORMATION
･
Alternatively, from the home screen, m→
[Notifications] to open the notification panel.
❖
Closing the Notification panel
Drag the tab at the bottom of the
1
Notification panel ( ) upward, or
Tap
c
32
Before using the FOMA terminal
Page 35
◆
When the screen display is turned
off
When no operation is performed in certain period of time,
the display is automatically turned off according to the
screen time out setting and the FOMA terminal goes into
sleep mode.
X
or
B
1
Sleep mode is deactivated, and the lock screen
appears.
✔
INFORMATION
･
When activating sleep mode manually, press X while in
display mode.
･
When receiving a call or SMS message while in sleep
mode, sleep mode is deactivated.
◆
When lock screen appears
Slide at the bottom of the lock screen
1
right or left
The lock is canceled.
✔
INFORMATION
･
Number of missed calls and new mail arrival (set by the
type of new mail) are displayed even when lock screen is
displayed.
･
Slide or to activate/deactivate manner
mode.
･
When certain period of time elapses during lock screen,
the display is automatically turned off and the FOMA
terminal goes into sleep mode regardless of screen time
out setting.
Home screen
Home screen is a start screen to use applications. You can
return to the Home screen anytime by pressing B.
･
Slide or flick any of the 5 Home screens left and right to
switch to use.
◆
Viewing home screen
a
b
d
e
: New mail
f
g
: Missed call
c
: Calling
a
Status bar→P31
Conditions on the FOMA terminal, etc. are notified with
icons.
b
Customize area→P34
Part of the Home screen which you can customize. You
can locate shortcuts, widgets, folders, wallpaper and
App history. Yon can delete items displayed by default.
33
Before using the FOMA terminal
Page 36
c
Call/missed call/during a call
Tap to make a call.
When number of missed calls is displayed, tap to
display Call history.
During a call, tap to switch to the call screen.
d
App history
The 3 most recently-used applications are displayed
among used applications which are activated from the
application menu. Tap to start the applications.
･
Applications displayed in shortcuts in the customized
area of the Home screen are not included.
e
The position of the Home screen
Indicate which screen is currently displayed among the
5 Home screens .
f
Mail/new mail
Tap to activate sp-mode mail, Email, or SMS according
to Set incoming msg (→P71) setting. When new mails
arrive, it is notified with .
g
Activate an application
Tap to display the application list.
Touch and hold for 1 second or more to display 5
panels so that you can switch the Home screen.
✔
INFORMATION
･
From the Home screen, m→
the setting menu.
→
P63
Tap [Settings] to display
◆
Customizing the Home screen
You can locate desired application shortcuts or widgets on
the Home screen.
❖
Adding shortcuts or widgets
From the Home screen, m→
1
Homescreen]
Switch to edit screen.
･
Slide or flick left and right to switch the Home
screen that you want to customize.
[Add]→[Shortcuts]/[Widgets]/[Folders]/
2
[App history]
You can paste a selected item on the Home screen.
･
When you tap [App history], items are not
selectable.
･
You can drag pasted items to change their positions
or put them into to delete.
･
From the Home screen, touch and hold the
customize area for 1 second or more to display the
menu.
[Done]
3
✔
INFORMATION
･
Even though 2 or more widgets for speed dials are
pasted, up to 4 items can be registered. All widgets for
speed dials are linked and their contents become the
same.
❖
Deleting shortcuts or widgets
B→Slide left and right to display the
1
Home screen that you want to customize
Select a shortcut or widget you want to
2
delete (1 sec. or mode)
→
Select an item
→
Drag it to
[Edit
34
Before using the FOMA terminal
Page 37
◆
Changing Home screen wallpaper
From the Home screen, m→
1
･
You can also customize by touching and holding the
customize area for 1 second or more and tapping
[Wallpapers].
[Gallery]/[Live wallpapers]/[Preset]→Select
2
❖
Changing the Home button design
1
◆
Switching to another home screen
1
2
→
an image
･
When you select an image by tapping [Gallery],
drag the inside of the trimming frame to specify the
position, and drag the corner of the trimming frame
to zoom in/out, and tap [Save] before setting is
complete.
･
When you tap [Live wallpapers]→[Photo Collage],
tap [Settings…]→[Select image folders]→[Select
folders]→Mark a folder to specify an image folder in
the microSD. Display mode can also be set. Still
images taken with the camera are saved under the
DCIM folder, and downloaded images are saved in
the download folder.
You can also specify an image folder saved to a
microSD card from a PC. For details on saving still
images to a microSD card from a PC, see "Operating
data on a microSD card from a PC".→P103
From the Home screen, m→
Homescreen]
button design]
From the Applications menu, [Homescreen
selector]
Select another Home screen
･
If you mark [Use by default for this action.], the
Home screen will not be displayed when pressing
B
[Set wallpaper]
→m→
→
→
[OK]
.
Select a design
[Wallpaper]
[Edit
[Change HOME
✔
INFORMATION
･
To switch to Android standard Home screen, tap
[Launcher] in Step2.
･
To return to the Home screen, tap [Home] in Step 2.
Applications screen
Display the application menu so that you can activate
registered applications or change the FOMA terminal
settings.
◆
Displaying Applications menu
From the Home screen,
1
Switching list view/tile view : [List] or [Grid]
Sorting and displaying : [Sort]→[By name]/[By
download date]/[By frequency of use]/[By
organize]
Page switch : Scroll left and right for the tile view and
scroll up and down for the list view
❖
Closing the application menu
B
1
35
Applications menu
or
c
Before using the FOMA terminal
Page 38
◆
Application list
By default, the following applications are registered.
･
Some applications may require download or
installation.
＠F
ｹｰﾀｲ応援団
Connect to ＠F
Amazon JP :
application has full of useful functions such as keyword
search.
ANA旅達 (ANA travel information) :
provides you with travel information from ANA
information site "
BeeTV :
mobile phones. Register paid-membership to watch all
programs on BeeTV.
BOOK
Store 2DFacto is an electronic book store where you can
view and buy e-books in many categories such as
serious novels, popular comics, hot business books, etc.
docomo
Board) :
Inquiry and confirmation of the safety in case of disaster
can be made.
eco
consumption. It can be automatically enabled according
to the battery level. You can easily change the setting
from the widget.
Evernote :
various information such as website contents, shot
images, idea memos to the server to search/view at any
time you want it. Saving or viewing information can be
available not only from the FOMA terminal but also PC
or other devices.
*
To use this application, create an Evernote account.
F-LINK :
pictures to a PC wirelessly to enjoy them.
Facebook :
Gmail :
(@ F mobile phone supporters) :
ｹｰﾀｲ応援団
Make easy shopping at Amazon.co.jp. The
BeeTV is a dedicated broadcasting station for
ストア
2Dfacto (BOOK Store 2DFacto) :
災害用伝言板
An application to use Disaster Message Board
モード
(eco mode) :
Evernote is a service that allows you to save
You can transfer shot still images or moving
Sign in to Facebook.
Send/Receive Google account mails.→P83
site.
The application
旅達空間
".
(docomo Disaster Message
eco mode reduces battery
BOOK
GREE :
This is an official application of GREE, with
which over 25 million users enjoy communications or
games.
G
ガイド番組表
ground-based broadcasting, BS digital broadcasting.
Program search by keywords or categories is available.
HOT PEPPER :
service with full of latest search technology so that you
can easily search store information. You can also search
beneficial coupons.
iD
設定アプリ
convenient electronic money with which you can make
payment just by holding the terminal over an IC card
reader. You can use iD right after easy settings.
ｉチャネル
weather or news is delivered. Latest information
received automatically appears on the widget on the
Home screen.
*
i-Channel is a charged service requiring subscription.
JAL
application dedicated for JAL domestic flights which
allows you to reserve/purchase domestic flight tickets
quickly on the spot or check arrival and departures
information in advance.
Latitude :
are on the map.→P109
mixi :
22 million users, and makes communication smarter
and more enjoyable. You can check current information
of your friends or share photographs.
Mobage :
enjoy very popular games with.
NX!input powered by ATOK :
sp
モードメール
receive mail using i-mode mail address
(@docomo.ne.jp).→P83
SUUMO :
application to search for rental, properties for sale,
companies which handle remodel, custom home or
examples.
(G-GUIDE program table) :
This is a search application for food
(iD setting application) :
(i—Channel) :
国内線
(JAL domestic flights) :
You and your friends can check where you
This is an official application of "mixi" which has
This is a Mobage application which you can
This is a standard real estate search
Various information such as
Make ATOK settings.
(sp-mode mail) :
View
iD is a
This is an
You can send and
36
Before using the FOMA terminal
Page 39
ThinkFree Office :
and PDF files.→P114
Twitter :
communicate with someone by posting a short
message on a website.
Twonky Mobile Special :
or music stored in the phone or published on the
website can be played back wirelessly on the DLNA
compatible TV or audio device.
*
To use contents on the website, an access point connectable to the
Internet is required.
YouTube :
VirusScan (
Scan)) :
microSD card to protect a smartphone from the virus
damage.
アプリランキング
Android applications released day by day with the
unique point of view of Oricon such as "
ンキング
about 50,000 smartphone users.
Osaifu-Keitai :
holding the FOMA terminal over the IC card reader in
stores, etc.→P110
Still Camera :
Calendar :
Gallery :
with the camera or downloaded from website and saved
in a microSD card.→P97
しゃべってカンタン操作
Activate applications such as phone and mail or setting
menu with your voice. You can edit keywords to call out.
→
P114
じゃらん
information site "
CO., LTD. with which you can search more than 20
thousand hotels or "
Jorte :
pocketbook.
Downloads :
website.
You can view Microsoft office files
This is a client application of Twitter. You can
Moving pictures, still images
You can watch YouTube video.→P99
ドコモ あんしんスキャン
Detect virus hidden in installed applications or
(Application ranking) :
(Application satisfaction ranking)" researched
It allows you to pay money only by
Shoot still images.→P94
View calendar and register schedule.→P112
View still images or moving pictures taken
(Seak and operate easily) :
(Jaran) :
This is an application for the travel
じゃらん
Manage your schedule like using a system
宿泊プラン
Manage images, etc. downloaded from
(DOCOMO Anshin
Introduce
アプリ満足度ラ
net" produced by RECRUIT
(stay plan)".
Task manager :
to quit.
*
Some applications may not be displayed.
Talk :
docomo market :
can search applications and moving pictures.→P106
ドコモ海外利用
packet communications overseas or settings/
confirmation of flat-rate service overseas.
ToruCa :
store information, coupon tickets, etc.→P111
Navigation :
Google Maps Navigation.
Barcode Scanner :
Browser :
Places :
information around where you are.→P109
Profile :
number), and register your name or mail address.
ヘルスチェッカー
steps, walked distance, calories, fat consumption,
activity amount, etc.
Homescreen selector :
ポンパレ
Market :
マクドナルド
coupons for McDonald's member or shop search
functions.
Maps :
and calculate routes.
Email :
Messaging :
Notepad :
melodycall :
desired melody. You can hear music as a trial, and buy
to set it.
*
Melody call is a charged service requiring subscription.
Livedoor :
"livedoor" for Android phone.
Music :
Sound Recorder :
Display currently running applications
Chat via Google Talk.→P87
Access docomo market where you
(International roamin g) :
Display, search or refresh ToruCa such as
Search routes toward destinations using
Read bar code information.→P96
View web pages like a PC.→P90
Use Google places to search detailed
Check your phone number (subscription phone
(Health checker) :
(Pomparade) :
Use Android Market.→P104
View your current location, find other locations
Send/receive emails to/from users of PC.→P80
Create memo.→P113
Easily access and browse the web portal
Play music files.
Switch home screens.
Use Group Buy tickets.
Launcher (McDonald's Launcher) :
Send/receive SMS.→P85
Let the caller to your FOMA terminal hear
Record voice.
Support use of
Display number of
Use
37
Before using the FOMA terminal
Page 40
Voice Search :
sound.
楽天オークション
fashion items, etc. displayed in Rakuten auction.
楽天市場
million items sold in Rakuten by various methods such
as "検索 (Search)", "
(category)" for shopping.
Google Search :
or website.
Clock :
Instruction Manual :
terminal You can activate desired functions from
instructions.
*
See "About manuals for F-12C" in "
書籍・コミック E★エブリスタ
EVERYSTAR) :
electronic comics ranged from original works by
professional authors/famous people to general user
posted popular works.
*
Viewing works of professional authors/famous people is a
charged service.
乗換NAVITIME (NAVITIME transfer guide) :
detail root guide to the destination.
Koe no Takuhaibin :
using phone to record a message to notify other party of
recording via SMS. The application allows you easily to
record and play voice messages.
Infrared :
Settings :
地図アプリ
you go out with functions such as maps, navigation, or
transfer provided by docomo map navigation.
*
This application is available for a certain trial period.
朝日新聞
articles.
Calculator :
subtraction, multiplication, and division.→P113
Phone :
Search information in website by voice
(Rakuten auction)：Search popular
(Rakuten market) :
Search functions in the FOMA terminal
Display a clock or set alarm.→P112
View high-profile electronic books and
Receive contacts via infrared communication.
Make the FOMA terminal settings.
(map application) :
(Asahi Shimbun) :
Perform calculations such as addition,
Make calls.→P51
Search more than 70
ランキング
(ranking)" or "
Instruction manual for the FOMA
はじめに
(Books, comics E
Koe-no-Takuhaibin is a service
The application helps
Read the Asahi Shimbun
カテゴリ
(Getting started)".
★
Obtain
PhoneBookCopy :
from another FOMA terminal by using a microSD card.
You can also copy phonebook data registered to a
Google account to the docomo account.
Phonebook backup :
Phonebook back up center automatically on a regular
basis and restore the contacts in case of losing the
FOMA terminal or erasing the contacts accidentally.
*
For details on Phonebook backup, refer to "
ク（spモード<スマートフォン>編）
Guide [sp-mode <Smartphone>])".
Video camera :
野村證券
application to access to the Nomura Securities official
website for smartphone, in which you can get lots of
investment information at free of charge such as stock
price, foreign exchange, market news or videos.
Contacts :
so that you can address someone from contacts by
simple operation.→P54
◆
Sorting applications
From the Applications menu, m→
1
[Organize]
Select an application (1 sec. or more)→Drag
2
to the desired place
･
Tap [Sort]→[By organize] to display sorted
contents.
･
To return to its default order, on the organizing
screen, m→
◆
Opening the recently used
You can copy phonebook data to/
You can back up contacts to the
ご利用ガイドブッ
(Mobile Phone User's
Shoot moving pictures.→P95
(Nomura Securities) :
Register phone numbers or email addresses
Tap [Reset sort order].
This is a dedicated
→
[Done]→[OK]
application window
You can display the recently used applications to activate.
B
(1 sec. or more)
1
Select an application you want to activate
2
38
Before using the FOMA terminal
Page 41
Character Entry
◆
ATOK keyboard
You can enter characters using numeric keyboard,
QWERTY keyboard or handwritten keyboard.
･
You can activate voice input from each keyboard.→P42
･
When overwrite handwritten input is on for the NX!input
powered by ATOK setting, handwriting input is enabled
with the numeric or QWERTY keyboard displayed.
Overwrite handwritten input is on by default.→P43
■
Numeric keyboard
This is a widely used keyboard on the mobile phone. 4
types of input methods can be used : Numeric keypad
input, Gesture input, Gesture input pro, Flick input. →P39
■
QWERTY keyboard
Enter characters using Romaji input.
■
Handwritten keyboard
Enter characters in handwriting.
❖
Displaying/Hiding the keyboard
■
Displaying the keyboard
Select the text input field
1
･
Alternatively, while the cursor is in the text input
field, press m for 1 second or more.
■
Hiding the keyboard
When keyboard is displayed, m (1 sec.
1
or more)
･
Alternatively, you can touch and hold for 1
second or more to display the guide. To hide the
keyboard, slide the guide to the direction you like
and after is switched to , slide to again
and release your finger.
❖
Switching the keyboard
While entering characters,
1
Each time you tap, keyboard type changes.
･
Touch for 1 second or more and slide to [
ンキー
(numeric )]/[
or flick up and down, left and right on to
switch.
❖
Setting numeric keyboard input mode
From the Applications menu, [NX!input
1
powered by ATOK]
→
[Input mode]
[Numeric keypad input]/[Gesture input]/
2
[Gesture input pro]/[Flick input]
手書き
(handwritten)]/[QWERTY]
→
[Software keyboard]
テ
39
Before using the FOMA terminal
Page 42
❖
Entering on the numeric keyboard
Switch to the numeric keyboard→P39
1
To switch to the desired input mode,
2
･
Only one-byte number can be entered in the
number input mode.
･
Touch for 1 second or more to display NX!input
menu so that you can set ATOK or register words.
Enter characters
3
･
Conversion candidates are displayed at the top of
the keyboard each time you enter text. You can
display conversion candidates not on screen by
scrolling to the left and right.
･
Tapping deletes the character immediately to
the left of the cursor.
･
To move the cursor, tap / .
･
To restore the latest fixed text to the original, tap [
す
(back)].
･
Predictive conversion candidates are not included
in the displayed conversion candidates when
tapping [変換 (Convert)] after entering text.
･
Entered text can be converted to katakana/numbers/
alphabet characters/date (two-byte/one-byte) by
tapping [
カナ英数
entering text. For example, to input "
byte), enter "
alphanumerics)]→Select [全角 (tow-byte)]→Tap
[
１２３
後変換
two-byte katakana/one-byte katakana.
･
To display characters in reverse order, tap .
■
Numeric keypad input
Tap continuously a key assigned the character you want to
enter until the desired character is displayed.
(Kana/alphanumerics)] after
あかさ"→[カナ英数
] (two-byte). Tap [変換 (Convert)] and then [
(Post-convert)] to convert them to hiragana/
(Kana/
１２３
" (two-
■
Gesture input
If you tap and keep your finger on the key assigned the
character you want to enter, characters (gesture guide) will
be displayed around that key. Slide your finger to the
desired character without removing your finger from the
screen.
･
To enter voiced/semi-voiced sound or small characters,
slide once or twice downwards without releasing your
finger from the key. A gesture guide for voiced/semivoiced sound or small characters will be displayed
around that key. Slide your finger to the desired
character without releasing your finger from the screen.
Slide
downward
戻
･
In the alphanumeric input mode, you can switch
between uppercase and lowercase characters by sliding
downwards without releasing your finger from the
screen.
■
Gesture input pro
You can make settings for displaying/hiding the gesture
guide or how long it takes until the gesture guide appears.
･
For setting procedure, see “Setting the ATOK keyboard”
→
P43
■
Flick input
If you touch and keep on the key assigned the character
you want to enter, characters (flick guide) will be displayed
on that key. Flick towards the desired character without
releasing your finger from the screen.
･
To enter voiced/semi-voiced sound or small characters,
tap once or twice after flicking.
twice
Example: Entering "
ぱ
"
40
Before using the FOMA terminal
Page 43
❖
Entering on the QWERTY keyboard
Switch to the QWERTY board→P39
1
To switch to the desired input mode,
2
･
touch and hold for 1 second or more to display
NX!input menu so that you can make ATOK setting
or register words.
Enter characters
3
･
Conversion candidates are displayed at the top of
the keyboard each time you enter text. You can
display conversion candidates not on screen by
scrolling to the left and right.
･
You can toggle between the uppercase screen and
the lowercase screen by tapping . Numbers can
be entered in the lowercase screen.
･
Tapping deletes the character immediately to
the left of the cursor.
･
To move the cursor, tap / .
･
Enter characters and then tap [
convert)] to convert them to hiragana/two-byte
katakana/one-byte katakana/alphabet characters.
･
Predictive conversion candidates are not included
in the displayed conversion candidates when
tapping [変換 (Convert)] after entering text.
❖
Entering by the pictogram/smiley/
後変換
(Post-
symbol palette
･
Pictograms cannot be entered depending on the text
input field.
(1 sec. or more)→Slide to
1
(pictogram)/ (smiley)/ (symbol)
without releasing your finger
･
When / / is displayed on the
keyboard, tap to operate in the same way.
Select the category →Select a pictogram/
2
smiley/symbol you want to enter from the
item list
･
You can display categories not on screen by
scrolling the category field at the top of the palette
to the left and right.
･
You can display items not on screen by scrolling the
list list to the left and right.
･
You can display the history list beginning with the
newest entered item by tapping [履歴 (History)] at
the top left of the palette. You can also enter items
from this history list.
❖
Entering common phrases
(1 sec. or more)→Slide to [
1
(Common phrases)] without releasing your
finger
･
When is displayed on the keyboard, tap it to
operate in the same way.
Category
Select a category→Select a common phrase
2
you want to enter from the list
❖
Entering from the character code
table
(1 sec. or more)→Slide to [
1
(Character codes)] without releasing your
finger
Category
Select a category→Select a character you
2
want to enter from the list
41
Before using the FOMA terminal
定型文
文字コード
Page 44
❖
Entering quoting from contacts
(1 sec. or more)→Slide to without
1
releasing your finger
[
電話帳／
ATOK
2
direct input)]
contacts list
◆
Entering by handwritten input
Enter characters by writing characters in the handwritten
area with your finger.
Switch to the handwritten keyboard→P39
1
Write a character by sliding your finger in
2
the handwritten area
･
Conversion candidates are displayed at the top of the
keyboard each time you enter text. You can display
conversion candidates not shown on screen by scrolling
to the left and right. Tap to switch to the
conversion candidate list, from which you can select the
candidate.
･
When you tap the character that is not fixed, character
list of correction candidate in the handwritten area
appears. If you tap the character from the list, you can
change the character.
･
Tapping deletes the character immediately to
the left of the cursor.
ダイレクト
→
Select a name in the
→
Mark item to quote→[OK]
(Contacts/ATOK
◆
Entering by voice input
You can enter characters by converting your voice.
When entering characters,
1
the word you want to enter
Select a character from the search
2
suggestion list
･
If the spoken word is not recognized properly, tap [Redo]
to speak again.
･
You can display candidates not on screen by scrolling
the recognition candidate list up and down.
◆
Switching to the Android keyboard
You can also switch to the Android keyboard to enter
English characters.
･
The Android keyboard does not support the Japanese
input mode.
Text entry field (1 sec. or more)
1
[Input method]→[Android keyboard]
2
✔
INFORMATION
･
To return to the ATOK keyboard, select [NX!input] in Step
2.
→
Speak
42
Before using the FOMA terminal
Page 45
◆
Setting ATOK
❖
Setting the ATOK keyboard
From the Applications menu, [NX!input
1
powered by ATOK]
Set each item
2
Keypad sound :
operation tone sounds each time you tap a key.
Keypad vibration :
FOMA terminal vibrates each time you tap a key.
Input mode*1 :
keyboard.
Multi—tap input*1 :
excluding numeric keypad input] is marked, multitap input is available when using gesture input or
flick input. When the [Enable auto cursor moving] is
marked and if you do not tap for a certain period of
time during multi-tap input, the cursor
automatically moves to the right and stands by for
the next character entry. You can also set the time
(tap interval) before the cursor moves.
Character delete key*1 :
character immediately to the left of the cursor is
deleted when is tapped. When [CLR] is selected,
the character immediately to the right of the cursor
is deleted when [Clear] is tapped.
Gesture guide*1 :
input Pro and if [Show the gesture guide] is
unmarked and [OK] is tapped, the gesture guide is
no longer displayed. When this checkbox is
selected, you can set the time before the gesture
guide is displayed after a key is tapped.
Flick guide*1 :
mark to display the Flick guide.
Flick Sensitivity*1 :
input, adjust the sensitivity of flick input.
→
[Software keyboard]
When this checkbox is marked, the
When this checkbox is marked, the
Set the input mode for the numeric
When the [Enable multi-tap input
When [BS] is selected, the
When input mode is set to Gesture
When input mode is set to Flick input,
When input mode is set to Flick
Auto alphanumeric select*2 :
marked, input mode is one-byte alphanumerics
when switched from the numeric keyboard to the
QWERTY keyboard.
Direct alphanumeric input*2 :
marked, entered alphanumerics are fixed one by
one.
Auto space insert*2 :
space is automatically inserted after a word is
applied in the alphanumeric input mode.
Show numeric keys (vertical screen)*2 :
checkbox is marked, the numeric key is displayed
when the QWERTY keyboard is displayed vertically.
Show numeric keys (horizontal screen)*2 :
checkbox is marked, the numeric key is displayed
when the QWERTY keyboard is displayed
horizontally.
Overwrite handwritten input*3 :
QWERTY keyboard displayed, set whether to
enable handwritten input.
Number of input boxes (Vertical display)*3 :
number of input boxes for handwritten input in the
portrait display mode.
Number of input boxes (Horizontal display)*3 :
number of input boxes for handwritten input in the
landscape display mode.
Recognition speed*3 :
handwritten input.
*1 Can be set in Numeric keyboard.
*2 Can be set in QWERTY keyboard.
*3 Can be set in Handwritten input.
When this checkbox is
When this checkbox is
When this checkbox is marked, a
When this
When this
When the numeric or
Set the
Set the
Set recognition speed for
43
Before using the FOMA terminal
Page 46
❖
Entry/Conversion settings
From the Applications menu, [NX!input
1
powered by ATOK]
Converting]
Set each item
2
Input prediction :
predictive conversion candidates are displayed.
Showing prediction candidates :
is marked with predictive conversion ON, input
predictive candidates are displayed before the next
character is entered.
Use half-width space ：
entering Japanese characters.
❖
Initializing learning data
Once a phrase or expression is entered, it is automatically
stored in memory, and is displayed as a predictive
conversion candidate. All learned data can be deleted and
the FOMA terminal can be reset to its default state by
initializing learned data.
From the Applications menu, [NX!input
1
powered by ATOK]
Converting]
[Initializing learning data]→[OK]
2
❖
Changing the keyboard design
From the Applications menu, [NX!input
1
powered by ATOK]
Set each item
2
Theme :
Set the design theme of the ATOK software
keyboard.
Simple design :
Key size (vertical screen) :
portrait view.
→
[Entering /
When this checkbox is smarked,
When this checkbox
Enter a one-byte space when
→
[Entering /
→
[Design]
Make keyboard design simple.
Set the keypad size in the
Key size (horizontal screen) :
landscape view.
Font size :
Set the text size of conversion candidates.
number of lines to display (vertical screen) :
number of lines to display conversion candidates in
the portrait view.
number of lines to display (horizontal screen) :
number of lines to display conversion candidates in
the landscape view.
❖
User dictionary
You can register frequently used words to a user
dictionary in advance. When you enter characters with the
same reading, words in the user dictionary will be given
priority over other conversion candidates and displayed
first.
■
Registering words to a user dictionary
From the Applications menu, [NX!input
1
powered by ATOK]
utility]
m→[
2
3
4
5
■
Editing registered words
1
2
新規登録
Enter the word to register in "単語 (Word)"
Enter the reading in "読み (Reading)"
Select the part of speech→[登録 (Register)]
In the dictionary utility screen, select the
word you want to edit
Modify its registered content,→[修正 (Edit)]
Set the keypad size in the
→
[Tools]→[Dictionary
(New)]
Set the
Set the
44
Before using the FOMA terminal
Page 47
■
Deleting registered words
In the dictionary utility screen, select a word
1
you want to delete (1 sec. or more)
(Delete)]
→[はい
Deleting all words : In the dictionary utility screen,
m→[
■
Saving registered words to microSD card
In the dictionary utility screen, m→[一覧
1
出力
(Output list)]
On the "場所 (Output to)" field, select
2
[sdcard]
registered words in
Enter a file name→[OK]→[実行 (Execute)]→[
3
閉じる
(Close)]
✔
INFORMATION
･
To read word data saved on the microSD card, in the
dictionary utility screen,
register)]
→
Select a folder→Select a file→[OK]→[登録 (Register)]
Tap [
閉じる
❖
Adding common phrases
From the Applications menu, [NX!input
1
powered by ATOK]
phrase utility]
The common phrase list screen is displayed.
･
m→[
規作成
m→[
2
Enter a common phrase→Select a category
3
in the "
(Register)]
(Yes)]
全削除
(Delete all)]→[はい (Yes)]
→
Select a folder to save the
m→[
一括登録
In the "場所 (Output to)" field, [sdcard]
(Close)].
→
[Tools]→[Common
カテゴリー
(New)] to add a new category.
カテゴリー
(Category)]→m→Tap [
新規作成
(New)]
(Category)" field→[登録
(Batch
→[削除
→
❖
Editing common phrases
■
Editing the body text of common phrases
Select a common phrase you want to edit in
1
the common phrase list screen
Enter the changes→[登録 (Register)]
2
･
When the body text of a newly created common
phrase is edited, changes will also be made to its
title. To disable the link between a title and body
text, changing the title of a common phrase.
■
Changing the title of a common phrase
Select a common phrase whose title you
1
want to change in the common phrase list
screen (1 sec. or more)
[
タイトル変更
2
changes
■
Changing the category of a common phrase
Select a common phrase whose category
1
you want to change in the common phrase
→
list screen (1 sec. or more)
[
カテゴリー移動
2
category in the destination
■
Deleting a common phrase
Select a common phrase you want to delete
1
新
in the common phrase list screen (1 sec. or
more)
[削除 (Delete)]→[はい (Yes)]
2
✔
INFORMATION
･
To return common phrase data to its default state, on the
common phrase list screen,
Tap [はい (Yes)].
45
(Change title)]→Enter the
→
[OK]
(Move category)]→Select a
m→[
Before using the FOMA terminal
初期化
(Initialize)]
→
Page 48
❖
Initializing ATOK settings
Initialization returns ATOK settings to their default state.
From the Applications menu, [NX!input
1
powered by ATOK]
[OK]
✔
INFORMATION
･
Learned data, words in the user dictionary and additional
common phrases are not deleted even if ATOK settings
are initialized.
→
[Initializing settings]
◆
Editing text
You can copy texts in the character entry field, web page,
document or received mail and cut and paste texts in the
character entry field.
→
❖
Copying/Cutting texts
■
Copying/cutting in the character entry field
Touch and hold a text for 1 second or more
1
[Select word]/[Select all]
2
Selecting [Select word] highlights words at the tapped
location, and selecting [Select all] highlights the
whole range of the text in orange.
･
Slide knobs on the both end of text range to adjust
selected range.
･
To deselect, tap out of selected range.
Select highlighted text→[Copy]/[Cut] in
3
"Edit text"
･
Tap [Paste] in "Edit text" to overwrite the selected
range with pasted text.
■
Copying text in a web page or document
Touch and hold a text for 1 second or more
1
Text range is highlighted in orange.
･
Slide knobs on the both end of text range to adjust
selected range.
Select a highlighted text
2
The text is copied to the clipboard.
❖
Pasting a text
Move the cursor to the destination to paste
1
→
Touch and hold text for 1 second or more
→
[Paste]
The text is pasted to the cursor position.
46
Before using the FOMA terminal
Page 49
Lock/Security
◆
Security codes for the FOMA
terminal
Some functions provided for convenient use of the FOMA
terminal require the security code to use them. Besides the
security code for locking the FOMA terminal, the network
security code necessary for the network services etc. are
available. Make use of the FOMA terminal using an
appropriate security code according to your purpose.
Notes on the security codes
･
To set a security code, avoid imaginable numbers
such as "birth date", "a part of phone number",
"street address or room number", "1111" or "1234".
Maintain a separate record not to forget the
numbers.
･
Be careful never to reveal your security code to
others. If a security code is misused by others,
DOCOMO assumes no responsibility for damages
resulted from it.
･
If you forget your security codes, you need to bring
a document (a drivers license etc.) to identify your
subscription, the FOMA terminal and the UIM to a
docomo Shop. For details, contact "General
Inquiries" on the last page of this manual.
･
The PUK code is written on a subscription form
(copy for user) handed at subscription in a docomo
Shop. For users subscribed in other than docomo
Shop, bring a document (a drivers license etc.) to
identify your subscription and the UIM to a docomo
Shop, or contact "General Inquiries" on the last
page of this manual.
❖
Network security code
The network security code is a 4-digit number necessary
for identification or using the docomo Network Services at
reception of your request in docomo Shop or at a docomo
Shop or docomo Information Center. It can be set any
number at the subscription and also changed later by
yourself.
You can change your network security code to the new one
using the PC if you have the "docomoID/Password" for the
"My docomo"* General support site for PC.
*
For "My docomo", see the reverse side of the back cover of this
manual (for the e
phone with your manners!" in "Appendix").
❖
PIN1 code/PIN2 code
You can set 2 security codes to the UIM: PIN1 code and
PIN2 code. The code is set to "0000" at the time of
subscription.→P48
PIN1 is a 4- to 8-digit number (code) that must be entered
for user confirmation to prevent unauthorized use by a
third party every time you insert the UIM into the FOMA
terminal or when the FOMA terminal is powered ON.
Entering the PIN1code enables making/receiving calls and
terminal operation.
The PIN2 code is a 4- to 8-digit security code that is used,
for example, for applying for issue of user certificates.
･
For using the UIM that you have used on another FOMA
terminal by inserting to this FOMA terminal, use the set
PIN1/PIN2 code on the former terminal. If you did not
change the setting, the code is "0000".
･
If you enter a wrong PIN1/PIN2 code 3 times
consecutively, the PIN1/PIN2 code is locked and cannot
be used anymore. In this case, unlock with "PUK".
❖
PUK code
The PUK code is a 8-digit number for canceling the locked
PIN1/PIN2 code. The PUK code cannot be changed by
yourself.
･
If you enter a wrong PUK code 10 times consecutively,
the UIM is locked. Please contact a docomo Shop.
47
トリセツ
(Instruction Manual), "Using mobile
Before using the FOMA terminal
Page 50
◆
Setting the PIN code
❖
Setting up SIM card lock
Set PIN1 code to be entered when the FOMA terminal is
turned ON.
From the Home screen, m→
1
[Location & security]→[Set up SIM card
lock]
[Lock SIM card]→Enter the PIN1 code→[OK]
2
[Lock SIM card] is marked.
･
To cancel the setting, [Lock SIM card]→Enter PIN1
code→[OK] to unmark.
✔
INFORMATION
･
When entering the PIN1 code for the first time, ent er
"0000".
❖
Changing the PIN code
To change the PIN1 code, set the PIN code (mark [Lock SIM
card]) in advance.
From the Home screen, m→
1
[Location & security]→[Set up SIM card
lock]
[Change SIM PIN]
2
Changing the PIN2 code : [Change SIM PIN2]
Enter the current PIN code→[OK]
3
Enter the new PIN code→[OK]
4
Re-enter the new PIN code→[OK]
5
[Settings]
[Settings]
❖
Entering the PIN1 code
Turn power ON→Unlock screen→Enter the
1
PIN1 code in the PIN entry screen
❖
Disabling the PIN lock
→
When the PIN1 code is locked, [Emergency
1
call]
Enter "**05* [PUK] * [new PIN1 code] *
2
[new PIN1 code] #"
･
For example, to change the PIN1 code to "7777"
when the PUK is 88888888, enter
"**05*88888888*7777*7777#".
✔
INFORMATION
･
If PIN2 code is locked instead of PIN1 code, from the
Applications menu, [Phone]
PIN2 code]*[new PIN2 code]#".
→
→
Enter "**052*[PUK]*[new
→
[OK]
48
Before using the FOMA terminal
Page 51
◆
Screen lock
If the screen lock is set, authentication is required after
unlocking screen, which prevents others from misusing
the FOMA terminal.
･
For the screen lock, you can select unlock method from
3 types: pattern, PIN and password.
❖
Setting screen lock
Set unlock method to activate screen lock.
･
When you change pattern, security code or password,
set again.
From the Home screen, m→
1
[Location & security]→[Set up screen lock]/
[Settings]
[Change screen lock]
･
When the screen lock is activated, unlocking is
required after tapping [Change screen lock].
[None]/[Pattern]/[Security code]/
2
[Password]
Disabling screen lock : [None]
Entering pattern to unlock : [Pattern]→Slide like
jointing at least four points vertically, horizontally
and diagonally to enter a pattern→[Continue]
Enter the same pattern→[Confirm]
･
When you set for the first time, "Securing your
phone"and "Example pattern" appear.
Entering security code to unlock : [Security code]
Enter the 4- to 16-digit security code→[OK]
Reenter the security code→[OK]
Entering password to unlock : [Password]→Enter the
4- to 16-digit password including alphabets
[Continue]→Reenter the password→[OK]
✔
INFORMATION
･
If you do not want to display the pattern when unlocking
the screen, from the home screen,
→
[Location & security]→[Use visible pattern] to unmark.
m→Tap [Settings]
→
→
→
･
To enable vibration when entering the pattern, security
code, password, from the home screen,
[Settings]
→
to mark.
❖
1
❖
→
1
2
3
❖
When you forget unlocking method of Lock screen, set a
new pattern/security code/password according to the
→
followings and then unlock.
･
If you fail unlocking screen 5 times, retry 30 seconds
later.
･
Even when the Lock screen is not unlocked, you can
make an emergency call from the unlocking screen.
P51
1
[Location & security]→[Use tactile feedback]
Manual screen lock
X
The FOMA terminal goes into sleep mode and the
screen lock is activated.
Unlocking the screen
During sleep mode, X or
B
Slide at the bottom of the lock screen
right or left
Pattern input screen or security code/password input
screen for Lock screen appears.
Enter screen unlock pattern/security code/
password
･
Tap [OK] when entering screen unlock security code
or password.
When you forget unlocking method
On the unlocking screen, [Forgot pattern?]/
[Forgot security code?]/[Forgot password?]
→
Sign in to Google account→According to
the onscreen instructions, set a new
pattern/security code/password.
m→Tap
→
49
Before using the FOMA terminal
Page 52
◆
Managing authentication
information
You can install authentication information for accessing
security-protected Wi-Fi networks or VPNs or other
certificates from the microSD card. You can also set a
password to authentication information storage for saving
authentication information and certificates.
❖
Setting password for authentication
information storage
From the Home screen, m→
1
[Location & security]→[Set password]
Enter a new password→Enter the new
2
password again
･
To change password, enter the current password.
❖
Enabling authentication information
and certificates
You can enable authentication information and certificates
by allowing applications on the FOMA terminal to access
authentication information storage set with a password.
･
Set a password to certification information storage in
advance.
From the Home screen, m→
1
[Location & security]
Mark "Secure credentials"
2
Enter the password for the authentication
3
information storage
→
[OK]
→
[OK]
[Settings]
[Settings]
→
→
❖
Clearing authentication information
storage
You can clear all authentication information or certificates
from the authentication information storage to reset the
storage password.
From the Home screen, m→
1
[Location & security]→[Clear storage]
[OK]
2
❖
Installing authentication information
or certificates from the microSD card
From the Home screen, m→
1
[Location & security]→[Install from SD
card]
Select the authentication information/
2
certificate you want to install
If necessary, enter the password→[OK]
3
Enter the name of the authentication
4
information/certificate
･
If a password is not set to the authentication
information storage, follow the onscreen
instructions to set the password.
[Settings]
[Settings]
→
[OK]
→
→
50
Before using the FOMA terminal
Page 53
Calling/Network
Services
Making a call
From the Applications menu, [Phone]
1
･
You can also make a call by tapping on the
Home screen.
Entering a phone number
2
･
To correct entered number, tap .
When a call is ended, [End]/
3
✔
INFORMATION
･
If your face etc. comes close to the proximity sensor
during a call, the display goes out. It is redisplayed by
moving away from the sensor.
･
When the earphone is connected or while calling with the
speakerphone, the proximity sensor is stopped and the
display remains on even when the face, etc. comes close
to the sensor.
･
If you put the ear to the earpiece over the hair , etc. the
proximity sensor does not work normally and the call
may be interrupted by unintended touch.
･
The alphabets are displayed on the number keyboard as
an aspect of global design, however it is not possible to
enter alphabets by tapping on the number keyboard.
→
m
◆
Emergency call
･
When you call the Police (110), Fire/Ambulance (119), or
Maritime rescue (118) from the FOMA terminal, clearly
indicate that you are calling from a mobile phone, then
give your present location and mobile phone number.
Also, make a point to call in a stationary position to
prevent the call from being dropped. Do not power off
the FOMA terminal for at least 10 minutes after the
emergency call just in case the Police or Fire/Ambulance
may have to get in contact with you.
･
Note that you may not connect to the local Fire
Department or Police Station depending on where you
are calling from.
From the Applications menu, [Phone]
1
Enter an emergency number
Police call :
110
Fire and emergency rescue :
Marine emergency :
118
119
→
2
✔
INFORMATION
･
Emergency calls cannot be made in Japan if the UIM is
not inserted.
･
Emergency calls can be made by tapping [Emergency
call] if it is displayed on screen. However, that emergency
calls cannot be made when the PIN code entry screen is
displayed or the PIN code is locked (PUK lock) (
→
P47).
51
Calling/Network Services
Page 54
◆
Showing/Hiding caller ID at each
call
You can specify whether to show your phone number
(caller ID) on the other party's mobile terminal when you
make a call.
･
Your caller ID is important personal information. So,
take care when notifying people about it.
From the Applications menu, [Phone]
1
Enter a phone number→m→[Display
callerID]/[No display callerID]
✔
INFORMATION
･
You can set to show/hide caller ID all at once in "Caller ID
Notification Service".
◆
Entering touch-tone signals
Touch and hold "*" for 1 second or more to enter a pause
(,) and send touch-tone signals. Touch-tone is used for
services such as listening to messages on your home
answering machine, ticket reservations and bank balance
inquiries.
From the Applications menu, [Phone]
1
Enter a phone number→"＊" (1 sec. or
more)
･
Enter "0" to "9", "*" and "#".
･
Alternatively, enter a phone number→m→Tap
[Add 2-sec pause] to enter pause (,).
･
When sending multiple messages, separate each
message with a pause (,) delimiter.
→
P61
→
Enter touch-tone signals
→
→
→
2
✔
INFORMATION
･
For details on sending touch-tone signals during a call,
see "Operation during a call"
→
P53.
◆
International call (WORLD CALL)
Enter "+" to make an international call. Touch and hold "0"
for 1 second or more to enter "+".
･
Using overseas→P115
･
For details of "WORLD CALL", contact "General
Inquiries" on the last page of this manual.
From the Applications menu, [Phone]→"0"
1
(1 sec. or more)
→
Enter "Country code-Area
code (City code) omitted prefix 0 and phone
number"
→
･
In some countries and areas such as Italy, "0" is
required.
･
When selecting from the country list and entering "+
country code", enter the area code (city code) and
phone numberm→
Select]→Select a country.
✔
INFORMATION
･
From the Applications menu, [Phone]→m→Tap
[Country Code Set] to register a country code.
[More]→[Country Code
Receiving a call
A call is received
1
SD
: Stop ringtone sounding or vibration.
Drag to the right end/
2
･
To reject an incoming call, drag to the left end.
When a call is ended, [End]/
3
✔
INFORMATION
･
On the FOMA terminal, answering calls cannot be put on
hold.
m
m
52
Calling/Network Services
Page 55
Operation during a call
The following operations are possible in the screen during
a call.
f
g
a
b
c
d
e
a
Temporarily puts the call on hold
b
Name or phone number
c
End call
d
Call another party
e
Turn the Bluetooth headset on
Switch to handsfree talking using the Bluetooth
headset.
f
Show status of Voice clear/Voice adjusting
g
Voice clear ON/OFF
h
Voice adjust ON/OFF
i
Call time
j
Display the dial keypad
Send touch-tone signals (DTMF tones).
k
Turns the microphone off (mute)
Make your voice inaudible to the other party.
l
Turn the speaker phone on
Make the other party's voice audible from the speaker
to talk on a handsfree phone.
*1
Tapping again restores the screen to the previous state.
*2
Subscription to Call Waiting Service is needed.→P60
*2
*1
*1
h
i
j
k
l
*1, 2
*1
*1
*1
◆
Call volume
･
The call volume can be adjusted only during a call.
During a call,
1
◆
Voice clear
During a call, the terminal adjusts the voice in suitable way
according to the ambient noise to make the voice to be
heard clearly. Also when the other's or your own voice is
small, the terminal increases the volume automatically.
During a call, [VOICE CLEAR]
1
❖
Voice adjusting
During a call in Voice clear, the terminal adjusts the sound
quality to more suitable one than Voice clear adjusted by
recognizing your action from its shakiness or movement
(while walking, while running).
◆
Voice adjust
The terminal changes the hearing sound based on the
average of hearing acuity for each age to make phone
conversation to be heard easily.
･
If you set "Voice adjust" in the initial setting (→P31),
voice sound is adjusted to the suitable hearing for your
age automatically.
During a call, [VOICE ADJUST]→Select an
1
adjustment level
SD
53
Calling/Network Services
Page 56
Call log
Contacts
You can check call logs and SMS logs.
From the Applications menu, [Phone]/
1
[Contacts]
a
b
c
❖
Histories screen sub-menus
You can refresh the logs or delete log lists by pressing
m
→
[Log]
a
b
Log icons
for dialed/sent log, for received log, for
missed call appear respectively. Also, appears
if you dialed or sent/received calls/SMS to or from
the same party continuously. Tap to check log
details, tap to go back to the previous screen.
Name or phone number
Tap to display the action list. Tap an item in the
action list, and display dialed calls, SMS
transmission, contact registration or the personal
information screen. You can delete the log or edit
a phone number and make a call by touching and
holding for 1 second or more.
Call icon
Tap to dial a call
in the Log screen.
c
You can enter phone numbers, email addresses, etc. to
Contacts. You can contact registered parties through
simple operation from the Contacts.
From the Applications menu, [Contacts]
1
a
b
a
Name
Tap to display the personal information screen.
You can make a call, send SMS, register favorites,
edit/delete the contact, etc. by touching and
holding for 1 second or more.
b
Index bar
c
Index
Jump to the index bar of the tapped letter.
❖
Setting the contacts to be displayed
c
in the Contacts list
You can set the display to show only contacts that have
phone numbers, or to show or hide contacts that are
included in specified accounts or groups of Google
accounts.
In the Contacts list screen, m→
1
[Display options]→Set contacts to be
[More]
displayed
→
54
Calling/Network Services
Page 57
❖
Contacts list sub-menus
You can register contacts (→P55), search or delete
selected contacts, set account, import/export contacts (
P56), view a group list, etc. by pressing m in the
contacts list.
◆
Displaying contacts by group
You can display contacts data by group specified in
registration.
In the Contacts list screen, m→
1
[Go to group list]→Select a group
･
On the group list, m→
to go back to the kana order contacts list screen.
❖
Creating a new group
In the group list,
1
[Register group]→Select an account if
2
necessary
･
Editing group name : [Edit group name]→Select an
･
Deleting a group : [Delete group]→Select an account
･
✔
INFORMATION
･
You cannot edit/delete in "No groups" and Google's
default groups.
→
Creating groups is available only for docomo
account or Google account.
account if necessary→Select a group you want to
edit→Edit group name→[OK]
You can also edit group name by selecting a group
you want to edit (1 sec. or more) on the group list
Tap [Edit group name].
if necessary→Select a group you want to delete
[OK]
You can also delete a group by selecting a group
you want to delete (1 sec. or more) on the group list
→
Enter a group name→[OK]
Tap [Delete group].
Tap [Goto kana order list]
m
[More]
◆
Displaying personal information
Select a name in the Contacts list
1
→
a
b
c
→
a
Face shot and name
b
Personal registered information
Tap an item or touch and hold an item for 1 second
or more to make a call or send email.
c
Contacts group
d
Favorites
Tap to add favorites.
e
SMS
Tap to send an SMS.
❖
Personal information screen sub-
d
e
menus
You can edit/delete contacts, share contacts (via Bluetooth
or mail attachment) and send contacts via infrared
communication by pressing m in the personal
information screen.
→
◆
Registering a contact
In the Contacts list screen, m→
1
→
contact]
→
Select an account if necessary
Set each item→[Done]
[New
→
55
Calling/Network Services
Page 58
❖
Registering contacts from a history
In the Log screen, select a party→[Add to
1
contacts]
→
[Create new contact]/Select a
contact to be added
･
For [Create new contact], select an account as
required.
Set each item→[Done]
2
◆
Editing contacts
In the Contacts list screen, select a contact
1
you want to edit (1 sec. or more)
→
contact]
◆
Deleting a contact
In the Contacts list screen, select a contact
1
you want to delete (1 sec. or more)
contact]
･
◆
Importing/Exporting contacts
In the Contacts list, m→
1
[Import/Export]→Select an item→Perform
Enter items to edit→[Done]
→
[OK]
In the Contacts list screen, m→
deletion] to select and delete a contact you want to
delete. Tap [Select all] to delete all contacts.
→
Tap [Selective
[More]
each operation
Import from SIM card :
to add from contacts saved on the UIM to import
them. Phone numbers are imported as "Others",
mail addresses are imported as "Mobile phone".
Specify the contacts you want
[Edit
→
[Delete
→
Export to SIM card :
UIM Only names/first registered phone numbers/
first mail addresses are exported. Up to 50 contacts
can be saved. When you export on overwriting,
note that all contacts saved in the UIM are deleted
first, and then new contacts are exported.
Import from SD card :
(vCard file) saved in microSD card to specified
account. When there are multiple files, select a file
to register.
Export to SD card :
except "Profile" to microSD card.
Share visible contacts :
Bluetooth or mail attachment.
Import (Infrared) :
communication, and register them to the docomo
account. The "Profile" is also updated. After contact
data is received, select [Add to the contact list] or
[Delete all before add].
Export (Infrared) :
"Profile" via infrared communication.
✔
INFORMATION
･
If you want to share all contacts data with another FOMA
terminal, use infrared communication to import and
export (
→
･
･
･
･
P56) or PhoneBookCopy (→P57).
If an incoming call is received or other applications are
activated while infrared communication, infrared
communication is aborted.
Even if all data is sent via infrared communication, some
mobile terminals cannot receive "Profile".
When the Bluetooth function is set to ON, you cannot use
infrared communication.
From the FOMA terminal, sending all contacts via
Bluetooth to a terminal other than a smartphone is not
available.
Export selected contacts data to
Register the contacts data
Save all contacts data (vCard file)
Send all contacts data via
Receive contacts via Infrared
Send all contacts data including
56
Calling/Network Services
Page 59
PhoneBookCopy
You can copy phonebook data to/from another FOMA
terminal by using a microSD card. You can also copy
phonebook data registered to a Google account to the
docomo account.
From the Applications menu,
1
[PhoneBookCopy]
･
When you activate PhoneBookCopy for the first
time, agree to "
Agreement)".
◆
Exporting phonebook data to a
microSD card
Attach a microSD card to the FOMA
1
terminal
In the "
2
(Start)"
The phonebook data saved in the docomo account is
saved to the microSD card.
◆
Importing phonebook data from a
microSD card
Attach the microSD card on which the
1
phonebook data is saved into the FOMA
terminal
In the "
2
you want to import
追加
(Add)]
The imported phonebook data is saved to the docomo
account.
使用許諾契約書
エクスポート
インポート
(License
(Export)" tab, tap "開始
(Import)" tab, tap a file
→[上書き
(Overwrite)]/[
◆
Copying contacts in a Google
account to the docomo account
In the "docomo
1
docomo account)" tab, tap a Google
account you want to copy
(Overwrite)]/[
The copied phonebook data is saved to the docomo
account.
･
It is possible to copy phonebook data registered in
the "本体 (Phone contacts)" to the docomo account
in the same way as a Google account.
✔
INFORMATION
･
If the item name (e.g. Phone number, etc.) of another
FOMA terminal is different from those in the FOMA
terminal, the item name may be changed or deleted.
Also, some text may be deleted in copied destination,
because savable character in a contact varies by FOMA
terminal.
･
When exporting phonebook to microSD card, data
without name cannot be copied.
･
When importing phonebook data from a microSD card,
files created using [
cannot be read.
アカウントへコピー
追加
一括バックアップ
→[上書き
(Add)]
(Backup all at once)]
(Copy to
Editing Profile
You can check the phone numbers on the FOMA terminal.
You can also enter and edit your own information.
From the Applications menu, [Contacts]
1
m→[Profile]→m→[Edit]→Set each
→
[Save]
item
→
57
Calling/Network Services
Page 60
Network services
You can use the DOCOMO network services below with
the FOMA terminal.
Service Monthly fee Subscription
Voice mail Service Charged Required
Call Waiting Service Charged Required
Call Forwarding Service Free Required
Caller ID Notification Service Free Not required
Public mode (Drive mode) Free Not required
Public mode (Power OFF) Free Not required
･
You cannot use the network services when you are
outside of the service area or in a location without the
radio wave.
･
"Stop of service" does not mean canceling the
subscription such as Voice Mail service, Call Forwarding
Service, etc.
･
For details, refer to the "Mobile Phone User's Guide
[Network Services]".
･
For subscription and inquiry, contact "General Inquiries"
on the last page of this manual.
◆
Voice Mail Service
The Voice Mail Service takes messages for you, as long as
it answers a call with the answering message, if there is an
incoming call when you are in a location without the radio
wave, while the FOMA terminal is powered off, or when
you are in a situation where you cannot answer a call.
･
The message can be recorded up to approximately 3
minutes for 1 message, up to 20 messages, and stored
up to 72 hours.
･
If a call is not answered when Voice Mail Service is
activated, the call is saved as a missed call in the call
history and appears on the status bar.
･
The FOMA terminal does not support Voice Mail Service
of videophone call. Call "1412" to set videophone to "Not
support".
･
When message is recorded, appears on the status
bar.
58
Calling/Network Services
Page 61
❖
Basic flow of the Voice Mail Service
Step 1 :
Activate the Voice Mail Service
Step 2 :
The caller leaves a message
If you are in a hurry and wish to leave a message in a
shorter time, enter "#" while answering message is
played to record message immediately.
Step 3 :
The receiver is notified that the Voice Mail Service
center has taken voice message
Step 4 :
Play the message
From the Home screen, m→
1
[Call settings]→[Network service setting]
[Settings]
[Voice mail service]
Select the item you want to use
2
Activate Voice Mail :
Mail Service.
Set ring time :
and tap [OK]. When the ring time is set to 0 seconds,
a record of the incoming call is not left in the
incoming call history, and the caller is connected
directly to the Voice Mail Service Center.
Deactivate Voice Mail :
Voice Mail Service.
Check Voice Mail setting :
Play messages :
to the Voice Mail Service Center. Operate according
to the voice guidance to play back the Voice Mail
message.
Voice Mail setting :
made to the Voice Mail Service Center. Operate
according to the voice guidance to change the
settings.
Check messages :
Voice Mail messages.
Notification settings :
message in the Voice Mail Service Center by a
sound or vibration. Mark [Notification] or
[Vibration].
Tap [OK] to activate the Voice
Enter a ring time (0 to 120 seconds),
Tap [OK] to deactivate the
Checks the current settings.
When [OK] is selected, a call is made
When [OK] is tapped, a call is
Check whether or not you have
Notify you of new Voice Mail
→
→
3
Activate notice call :
while the FOMA terminal is turned off or outside of
service area, you will be notified by SMS when you
turn on the FOMA terminal or move back to the
service area. For [All Calls], you are notified of all
incoming calls and for [Calls with], you are notified
of only incoming calls from callers with specific
caller IDs.
Deactivate notice call :
incoming call notification.
Notice call status :
incoming call notification.
If you have an incoming call
Tap [OK] to deactivate
Check the current status of
[OK]
･
Depending on the items used, [OK] may not be
displayed.
59
Calling/Network Services
Page 62
◆
Call Waiting Service
When there is another incoming call while you are on a
call, the in-call ringtone notifies you of the second call. You
can answer the second call by putting the first call on hold.
You can also put your current call on hold and place a call
to another party.
･
Even when the call is on hold, the caller is charged for a
call fee.
❖
Setting Call Waiting Service
From the Home screen, m→
1
[Call settings]→[Network service setting]
[Call waiting]
Select the item you want to use
2
Activate Call Waiting :
Waiting Service.
Deactivate Call Waiting :
Call Waiting Service.
Check Call Waiting setting :
settings.
[OK]
3
❖
Answering another incoming call
Tap [OK] to activate the Call
Tap [OK] to deactivate the
[Settings]
Check the current
→
→
during a call
You can hear a beeping tone during a call
1
Drag to the right end
2
･
To end the first call and answer a new call, tap
m→[End current call & answer].
Switch to the first call
3
Ending a later call : [End]/
Putting the later call on hold : (switch)
･
Tapping switches between the parties.
m
❖
Making another call during a call
During a call, (Hold)
1
[Add call]→Enter a phone number of the
2
other party
3
Ending the later call : [End]/
Putting the later call on hold : (switch)
･
Tapping switches between the parties.
✔
INFORMATION
･
If you are not subscribed to the Call Waiting Service, calls
cannot be put on temporary hold even by tapping
during a call.
◆
Call Forwarding Service
Call Forwarding Service is for forwarding calls to a
designated phone number when the FOMA terminal is
outside of service area, is turned off, or cannot be
answered within the set ring time.
･
If a call is not answered when Call Forwarding Service is
activated, the call is saved as a missed call in the call
history and appears on the status bar.
m
60
Calling/Network Services
Page 63
❖
Basic flow of the Call Forwarding
Service
Step 1 :
Save the forwarding number
Step 2 :
Activate the Call Forwarding Service
Step 3 :
The FOMA terminal receives a call
Step 4 :
If you do not answer the call, it is automatically
forwarded to the specified forwarding number
From the Home screen, m→
1
[Call settings]→[Network service setting]
[Settings]
[Call forwarding]
Select the item you want to use
2
Activate Call Forwarding :
the forwarding destination and the ring time (0 to
120 seconds). (Contacts can be called up by tapping
.) Tap [OK] to activate the Call Forwarding
Service.
When the ring time is set to 0 seconds, a record of
the incoming call is not left in the incoming call
history, and the caller is forwarded directly to the
forwarding destination.
Deactivate Call Forwarding :
the Call Forwarding Service.
Register number :
forwarding destination. (Contacts can be called up
by tapping .) Mark [Activate Call Forwarding] to
change the call forwarding number and activate the
Call Forwarding Service. Tap [OK] to reflect the
changes you have made.
If FWD number busy* :
the incoming call is connected to the Voice Mail
Service Center if the forwarding destination is busy.
Check CallFwd stng :
*
A subscription of Voice Mail service is required.
[OK]
3
Enter a phone number of
Select [OK] to deactivate
Change the phone number of the
When [Connect] is selected,
Check the current settings.
✔
INFORMATION
･
Even when the Call Forwarding Service is activated, you
can answer the call during a ringtone sounds.
･
The Call Forwarding Service subscriber is charged for a
call fee after call is forwarded.
❖
Setting Call Forwarding guidance
You can set whether to play the voice guidance informing
→
the caller that the call will be forwarded.
→
From the Applications menu, [Phone]
1
Enter "1429"
･
Follow the voice prompts to set.
◆
Caller ID Notification Service
You can display your phone number on the other party's
terminal when you make a voice call.
･
The caller ID is important personal information.
Carefully decide whether you notify a recipient of your
caller ID.
From the Home screen, m→
1
[Call settings]→[Network service setting]
→
[Caller ID notification]
Select the item you want to use
2
Check setting :
Activate/Deactivate :
notification.
[OK]
3
✔
INFORMATION
･
If you hear a message asking you to notify the caller ID,
enable caller ID notification or add "186" and call again.
･
Showing or hiding of the caller ID can be specified each
time that a call is made (
notification for each individual call is given priority over
the caller ID notification setting.
Check the current settings.
Tap [Notify] to set caller ID
→
P52). Setting to specify
→
[Settings]
→
→
61
Calling/Network Services
Page 64
◆
Setting Public mode (Drive mode)
Public mode (Drive mode) is an automatic answering
service used to ensure good manners in public places. Set
Public mode (Drive mode) to play a message for the caller
stating that you are unable to answer the call since you are
currently driving or you must refrain from speaking (in a
train, bus, cinema, etc.), and that the call will be
disconnected.
･
This mode can be set or canceled even when you are out
of service area or signal range.
･
You can make calls from the FOMA terminal even when
Public mode (Drive mode) is set.
From the Home screen, m→
1
[Sound]
Mark [Public mode]
2
❖
When Public mode (Drive mode) is set
The ringtone does not sound even if you have an incoming
call on the FOMA terminal. Incoming calls are recorded as
missed calls in the incoming call history.
･
Ringtones for mail, notices, and alarms do not sound.
However, if you check [Audible touch tones], and
[Audible selection] (→P70), the tones for those
operations sound.
･
When the FOMA terminal is not turned on, Public mode
(Drive mode) message is not played, and the caller hears
the same message as that played when you are out of
service area.
[Settings]
→
◆
Setting Public mode (Power OFF)
Public mode (Power OFF) is an automatic answering
service used to ensure good manners in public places.
Set Public mode (Power OFF) to play a message for the
caller stating you are somewhere the FOMA terminal must
be turned off (hospital, airplane, near priority seats on a
train, etc.), when the FOMA terminal is turned off or in
airplane mode, and the call will be disconnected.
From the Applications menu, [Phone]
1
Enter "*25251"
Public mode (Power OFF) is set. (Nothing changes on
the Home screen.)
Canceling Public mode (Power OFF) : From the
Applications menu, [Phone]→Enter "＊25250"
Checking Public mode (Power OFF) setting : From the
Applications menu, [Phone]→Enter "＊25259"
❖
When the Public mode (Power OFF) is
→
→
→
→
set
Public mode (Power OFF) remains set until it is canceled.
The setting is not canceled merely by turning the FOMA
terminal on.
･
Public mode (Power OFF) message is played even when
the FOMA terminal is out of service area or signal range.
62
Calling/Network Services
Page 65
Settings
Setting menu
✔
INFORMATION
･
See "Initial setting" (→P31) for default settings, see
"Network services" (
call call settings, and see "Enabling the location
information service" (
P47) for information about current location and security.
→
P58) and "Voice adjust" (→P53) for
→
P107) and "Lock/Security" (
→
You can make various settings in the menu displayed
from the Home screen, m→
Profile :
Display your phone number and your own
information saved to [User information].
Initial setting :
turn ON the terminal for the first time.
Wireless & networks :
function or Wi-Fi tethering.
Call settings :
phone call.
Sound :
ringtone, etc.
Display :
Animation, etc.
Multimedia :
pictures of YouTube etc.
Location & security :
password, etc.
Applications :
Accounts & sync :
synchronization.
Privacy :
Storage :
microSD card, etc.
Lang. & keyboard :
Voice input & output :
Text-to-Speech settings.
Accessibility :
accessibility plug-in.
Date & time :
Pedometer :
About phone :
terminal.
Display the initial setting screen when you
Set DOCOMO's network services or Internet
Set Public mode, Manner mode, Vibrate, Phone
Set Auto-rotate screen, Brightness, Font,
Set image quality correction of moving
Make settings about applications.
Make settings about accounts or
Reset the data.
Display amount of space, erase data in the
Set language and keyboard.
Set whether to enable downloaded
Make settings about date and time.
Set pedometer.
Display various information of the FOMA
Select [Settings].
Set Airplane mode, Wi-Fi, Bluetooth
Set My Location, screen lock,
Set Voice recognizer settings or
Wireless & networks
･
For infrared communication, see "Infrared
communication" (→P100), and for Bluetooth function,
see "Bluetooth communication" (→P101).
◆
Setting access point (APN)
Access points for connecting to the Internet (sp-mode,
mopera U) are already registered. You can add or change
it if necessary.
･
By default, sp-mode is set for the usual access point.
･
When Tethering & hotspot is set to ON, you cannot set
an access point. Turn Tethering & hotspot to OFF→P67
❖
Checking the access point in use
From the Home screen, m→
1
[Wireless & networks]→[Mobile networks]
→
[Access Point Names]
･
When a confirmation screen appears, tap [OK].
63
[Settings]
→
Settings
Page 66
❖
Adding new access point (New APN)
･
Do not change the MCC/MNC to other than 440/10. The
settings disappears from the screen.
From the Home screen, m→
1
[Wireless & networks]→[Mobile networks]
→
[Access Point Names]
･
When a confirmation screen appears, tap [OK].
m→[New APN]
2
[Name]→Enter a network profile→[OK]
3
[APN]→Enter a name→[OK]
4
Enter other items required by network
5
✔
INFORMATION
･
If you have changed MCC/MNC settings and they do not
appear on the APN name screen, reset to default or make
APN settings in [New APN].
❖
Initializing an access point
By initializing an access point, the default state is restored.
1
2
→m→
operator
From the Home screen, m→
[Wireless & networks]→[Mobile networks]
→
[Access Point Names]
･
When a confirmation screen appears, tap [OK].
m→[Reset to default]
[Save]
[Settings]
[Settings]
→
→
❖
sp-mode
sp-mode is ISP for NTT DOCOMO smartphone. In addition
to accessing Internet, you can use the mail service using
the same address as i-mode mail (@docomo.ne.jp), etc.
･
sp-mode is a service requiring subscription. For details
on sp-mode, refer to NTT DOCOMO website.
❖
Setting mopera U
mopera U is ISP of NTT DOCOMO. If you have subscribed
to mopera U, you can use Internet after making the simple
settings.
･
mopera U is a service requiring subscription.
From the Home screen, m→
1
[Wireless & networks]→[Mobile networks]
→
[Access Point Names]
･
When a confirmation screen appears, tap [OK].
Mark [mopera U
2
(mopera U (Smartphone flat-rate))]/
[mopera U
✔
INFORMATION
･
[mopera U設定 (mopera U settings)] is an access point for
setting mopera U. When you use the access point for
setting mopera U, packet communication charges for
setting do not apply. Note that you can set only the initial
setting screen or the change setting screen. For details on
mopera U settings, refer to mopera U website.
･
To use [mopera U
(Smartphone flat-rate))], subscription to packet flat-rate
service is required. For details on mopera U (Smartphone
flat-rate), refer to NTT DOCOMO website.
（スマートフォン定額）
設定
(mopera U settings)]
（スマートフォン定額）
[Settings]
(mopera U
→
64
Settings
Page 67
◆
Setting Airplane mode
When Airplane mode is set, wireless functions of the
FOMA terminal (phone, packet communication, Wi-Fi,
Bluetooth functions) is disabled.
From the Home screen, m→
1
[Wireless & networks]
Mark [Airplane mode]
2
◆
Wi-Fi
With Wi-Fi of the FOMA terminal, you can use mail or
access Internet by connecting to home or company
network or wireless LAN access point of public wireless
LAN service.
To connect to a LAN access point, you need to set
connection information.
■
Reception interference caused by Bluetooth
Wireless LAN (IEEE 802.11b/g/n) and Bluetooth function
use the same frequency band (2.4 GHz). If you use the
wireless LAN function and Bluetooth function of the FOMA
terminal at the same time, reception interference may
occur or the communications speed may lower. Also, you
may hear noise or have a connection problem.
Even when you use only wireless LAN function of the
FOMA terminal, the same problem may occur when
someone uses a Bluetooth device near you. In these cases,
do the following.
･
Keep the FOMA terminal over 10 meters away from a
Bluetooth device.
･
Within 10 meters, turn off the Bluetooth device.
■
Available channels
1 - 13 channel frequency bands can be used in Japan, and
1 - 11 channel frequency bands overseas.
[Settings]
→
❖
Connecting to network with Wi-Fi ON
From the Home screen, m→
1
[Wireless & networks]
Mark [Wi-Fi]
2
Wi-Fi is ON and available Wi-Fi networks are scanned.
[Wi-Fi settings]
3
Detected Wi-Fi network names and the security
settings (open network or protected network) are
displayed in Wi-Fi network list.
Select a Wi-Fi network→[Connect]
4
･
When you select a Wi-Fi network protected by
security, enter a password (security key) and tap
[Connect].
✔
INFORMATION
･
Even when Wi-Fi is ON, packet communication is
available. However, while you connect Wi-Fi network, WiFi comes first. When the Wi-Fi network is disconnected, it
switches to 3G/GPRS network connection automatically.
Note that packet communication fee applies for using 3G/
GPRS network.
❖
Notification of open network
Set to notify you when Wi-Fi open network is detected.
･
Set Wi-Fi to ON in advance.
From the Home screen, m→
1
[Wireless & networks]→[Wi-Fi settings]
Mark [Network notification]
2
[Settings]
[Settings]
→
→
65
Settings
Page 68
❖
Scanning Wi-Fi network
･
Set Wi-Fi to ON in advance.
From the Home screen, m→
1
[Wireless & networks]→[Wi-Fi settings]
m→[Scan]
2
Scanning for Wi-Fi networks starts. Detected Wi-Fi
networks displayed in the Wi-Fi network list.
❖
Simple registration of Wi-Fi network
You can connect through simple operations if connecting
via a Wireless access point supporting AOSS or WPS.
･
Set Wi-Fi to ON in advance.
From the Home screen, m→
1
[Wireless & networks]→[Wi-Fi settings]
[Easy Wi-Fi registration]
Select a registration method
2
AOSS system : [AOSS system]→[Yes]→Press
AOSS button on the Access point→[OK]
WPS system : [WPS system]→[Push button system]/
[PIN entry system]→[Yes]→On the access point,
perform operations
･
In case of push button method, press a dedicated
button on an access point. In case of PIN entry
method, enter PIN code displayed on the FOMA
terminal to an access point and tap [OK].
[Settings]
[Settings]
→
❖
Adding Wi-Fi network
Enter network SSID or security to add Wi-Fi network
manually.
→
･
Set Wi-Fi to ON in advance.
From the Home screen, m→
1
[Wireless & networks]→[Wi-Fi settings]
[Add Wi-Fi network]
2
Enter a network SSID of Wi-Fi network to
3
→
Select security
add
･
Security can be set to [Open], [WEP], [WPA/WPA2
PSK] or [802.1x EAP].
Enter additional security information as
→
4
required
→
[Save]
❖
Disconnecting Wi-Fi network
From the Home screen, m→
1
[Wireless & networks]→[Wi-Fi settings]
Select a connected Wi-Fi network→[Forget]
2
✔
INFORMATION
･
When you disconnect Wi-Fi network turning Wi-Fi OFF,
connection is automatically made if available Wi-Fi
network exists when Wi-Fi is turned ON next time.
[Settings]
[Settings]
→
→
66
Settings
Page 69
❖
Advanced Wi-Fi settings
■
Wi-Fi settings when screen off
Set operations of Wi-Fi function when the FOMA terminal
screen is OFF or during charge.
From the Home screen, m→
1
[Wireless & networks]→[Wi-Fi settings]
m→[Advanced]→[Wi-Fi sleep policy]
2
Select an operation
3
■
Checking MAC address
From the Home screen, m→
1
[Wireless & networks]→[Wi-Fi settings]
m→[Advanced]
2
A MAC address is displayed under [MAC address].
■
Using static IP address
You can set to connect to a Wi-Fi network using a static IP
address.
From the Home screen, m→
1
[Wireless & networks]→[Wi-Fi settings]
m→[Advanced]
2
Mark [Use static IP]
3
Select [IP address] and the other items
4
Enter necessary information
･
Enter [IP address], [Gateway], [Netmask] and [DNS
1] to enable a static IP address.
[Settings]
[Settings]
[Settings]
→
→
→
→
◆
Wi-Fi tethering
On the FOMA terminal, tethering function via Wi-Fi is
available. You can allow Wi-Fi devices to access Internet
via mobile phone line by using the FOMA terminal as WiFi hotspot.
･
You can connect up to 5 Wi-Fi devices.
･
When Wi-Fi hotspot is enabled, sp-mode functions other
than Internet connection and mail service are not
available.
･
When you connect to Internet using Wi-Fi hotspot, Wi-Fi
device applications such as web browser or game may
not work properly depending on the use conditions.
■
Available channels
1 - 13 channel frequency bands can be used in Japan, and
1 - 11 channel frequency bands overseas.
67
Settings
Page 70
❖
Setting Wi-Fi tethering
Set Wi-Fi hotspot to ON for connection setting
･
By default, security is set to [Open]. Make security
settings as required.
From the Home screen, m→
1
[Wireless & networks]→[Tethering &
hotspot]
Mark [Wi-Fi hotspot]
2
･
Unmark to turn OFF Wi-Fi hotspot.
Check the precautions and [OK]
3
[Wi-Fi hotspot settings]→[Configure Wi-Fi
4
hotspot]
[Network SSID]→Enter a network SSID
5
[Security]→Select a security
6
･
Security can be set to [Open], [WEP64], [WEP128],
[WPA PSK TKIP], [WPA PSK AES] or [WPA2 PSK
AES].
[Password]→Enter a password→[Save]
7
✔
INFORMATION
･
To see the information about Wi-Fi tethering, from the
Home screen,
→
[Tethering & Wi-Fi hotspot]→[Help].
❖
Simple registration of Wi-Fi device
Register Wi-Fi device supporting AOSS.
･
Set Wi-Fi hotspot to ON in advance.
From the Home screen, m→
1
[Wireless & networks]→[Tethering & Wi-Fi
hotspot]
[Easy Wi-Fi registration]→[AOSS System]
2
[Yes]
m→[Settings]→[Wireless & networks]
[Settings]
[Settings]
Press AOSS button on the Wi-Fi device
3
[OK]
4
✔
INFORMATION
･
When number of AOSS registration devices exceeds
→
24, a confirmation screen for deleting old registration
appears. To use AOSS
[Yes].
◆
Connecting VPN (Virtual Private
connection with new device, tap
Network)
VPN (Virtual Private Network) is a technology to connect to
the information in a protected local network such as
enterprises or universities from another network. To set up
a VPN connection from the FOMA terminal, you need to
retrieve the information related to security from your
network administrator.
･
When ISP is set to sp-mode, PPTP is not available.
❖
Adding a VPN
From the Home screen, m→
1
[Wireless & networks]→[VPN settings]
[Add VPN]→Select a VPN type to add
2
Set required items for VPN settings
3
･
For setting details, follow the instruction of the
network administrator.
m→[Save]
4
A new VPN is added in the list on VPN settings screen.
→
→
[Settings]
→
68
Settings
Page 71
❖
Connecting to VPN
From the Home screen, m→
1
[Wireless & networks]→[VPN settings]
Added VPNs are displayed in the list on the VPN
setting screen.
Select a VPN to connect to
2
Enter necessary authentication information
3
→
[Connect]
When you are connected, a notification icon appears
on the status bar.
❖
Disconnecting VPN
Open the Notification panel
1
Select a notification of VPN connecting
2
･
When VPN is disconnected, the notification icon on
the status bar turns to gray. To reconnect, open the
Notification panel and select the notification.
◆
Stopping packet connection
･
Some applications automatically perform packet
communications. Packet communication is kept active
unless you disconnect it or the time-out is occurred.
From the Home screen, m→
1
[Wireless & networks]→[Mobile networks]
Unmark [Data enabled]
2
[Settings]
[Settings]
Sound settings
→
･
For Public mode, see "Setting Public mode (Drive
mode)".→P62
◆
Setting Manner mode
Mute sound such as ringtone of call or mail, alarm, media
play that is emitted from the FOMA terminal.
From the Home screen, m→
1
[Sound]→[Manner mode]
Mark [Enable manner mode]
2
Status icons appear on the status bar. Icon varies by
the manner mode type. For each icon, see "Icons on
the status bar".→P31
✔
INFORMATION
･
Even in Manner mode, shutter sound, auto focus lock
sound for camera shooting, and count down sound for
self timer are emitted.
❖
Changing manner mode type
From the Home screen, m→
1
[Sound]→[Manner mode]→[Select manner
mode]
→
Selecting an item
2
Manner mode :
FOMA terminal.
Manner mode(Silent) :
turn off the vibration.
Manner mode(Alarm) :
manner mode except alarm volume and vibration
are according to the alarm settings.
Original manner :
for each sound type.
All sounds do not sound from the
In addition to mute sounds,
Same operation as usual
Set sound volume and the vibration
[Settings]
[Settings]
→
→
69
Settings
Page 72
❖
Setting original manner
From the Home screen, m→
1
[Sound]→[Manner mode]→[Original
manner settings]
[Volume]
2
[Ringer volume]/[Media volume]/[Alarm
3
volume]/[Notification volume]
Slide the slider to adjust sound volume
4
[OK]→c
[Vibration]
5
Mark/Unmark [Phone ringtone]/[Alarm]/
6
[Notification]
◆
Volume
You can adjust volume of ringtone, media playing sound,
alarm sound and notification sound.
From the Home screen, m→
1
[Sound]→[Volume]
Slide the slider to adjust sound volume
2
[OK]
･
Unmark [Use incoming call volume for
notifications] to adjust notification sound volume.
✔
INFORMATION
･
You can adjust sound volume with SD. However, they
are sound volume adjustment keys during playing music
or moving picture.
[Settings]
→
[Settings]
→
◆
Setting Phone ringtone/Notification
ringtone/Audible touch tones/Phone
→
vibrate
From the Home screen, m→
1
[Sound]
Set each item
2
Vibrate :
Set whether to vibrate when phone is
received.
Phone ringtone :
Notification ringtone :
USB is connected or USB storage is set to OFF, or
for starting positioning.
Audible touch tones :
to ON/OFF.
Audible selection :
for selecting menu.
Screen lock sounds :
setting and canceling screen lock to ON/OFF.
Change vibrate :
and completion of charging.
Unlock vibrate :
→
canceling the screen lock.
Touch op. vibrator :
operation to ON/OFF.
Vibrator intensity :
✔
INFORMATION
･
When ringtone is set for contacts, ringtone for contacts is
given priority.
Set phone ringtone.
Set notification sound when
Switch keypad operation sound
Switch operation sound to ON/OFF
Switch notification sound for
Set whether to vibrate when starting
Set whether to vibrate when
Switch vibration for touch
Set strength of vibration.
[Settings]
→
70
Settings
Page 73
◆
Setting input microphone
Set sound input microphone when the commercially
available stereo earphone set is connected to the
earphone/microphone jack of the FOMA terminal.
･
This setting can be made even while stereo earphone set
is connected→P99
From the Home screen, m→
1
[Sound]→[MIC Input]
[Phone MIC]/[Earphone MIC]
2
･
When you connect a stereo earphones without
microphone, select [Phone MIC].
[Settings]
Display settings
◆
Setting background image for lock
screen
From the Home screen, m→
1
[Display]→[Photo Screen]
[Picture settings]→Set each item
2
None :
Display the wallpaper of Home screen.
Folder :
Display images in selected folder in
slideshow.
Flickr :
Obtain images matching a keyword from Flickr
automatically and display them in slideshow.
Picasa :
Obtain images matching a keyword from
Picasa and display them in slideshow.
･
When you select [Flickr]/[Picasa], set [Update
interval] and [Network to be used].
･
When you select [Specified time] in [Update
interval], tap [Update time] to specify time.
[Settings]
◆
Display settings for new arrival mail
Set a mail type for displaying new arrival on the Home
screen.
From the Home screen, m→
1
[Display]→[Set incoming msg]
[sp-mode mail]/[E-mail]/[SMS]
→
2
✔
INFORMATION
･
Gmail is not supported.
◆
Changing screen display
❖
Auto-rotate screen
From the Home screen, m→
1
[Display]
Mark/Unmark [Auto-rotate screen]
2
✔
INFORMATION
→
･
Some applications such as Still camera or Video camera
record are not according to this setting.
❖
Backlight settings
Set screen brightness and idling time to turn off the
backlight and turn to sleep mode.
From the Home screen, m→
1
[Display]→[Backlight settings]
Unmark [Adjust automatically]
2
[Brightness]
･
To set auto-adjust brightness according to ambient
condition, go to Step 4 with [Adjust automatically]
marked.
Slide the slider to adjust brightness→[OK]
3
[Screen timeout]→Select a time
4
71
[Settings]
[Settings]
[Settings]
→
Settings
→
→
→
Page 74
❖
Setting font
Change displayed font on the screen.
From the Home screen, m→
1
[Display]→[Font settings]
Select a font→[OK]
2
❖
Setting animation display
Set whether to display in animation for screen or items.
From the Home screen, m→
1
[Display]→[Animation]
[No animations]/[Some animations]/[All
2
animations]
[Settings]
[Settings]
Multimedia
You can set whether to automatically correct YouTube
video.
From the Home screen, m→
1
[Multimedia]
Mark/Unmark [Video corr. engine]
2
･
When it is marked, video of YouTube etc, is autocorrected by high quality image engine.
✔
INFORMATION
･
If moving pictures recorded by Video camera or
downloaded and saved to microSD card are in the size of
FWVGA or less, the image quality of the moving pictures
is corrected.
[Settings]
Applications
→
◆
Permitting to install unknown
sources applications
Permit to install applications obtained from sites, mails,
etc. other than Android market.
･
To protect the FOMA terminal and personal data, only
download applications from trusted sources such as the
Android Market etc.
→
From the Home screen, m→
1
[Applications]→Mark [Unknown sources]
Confirm precautions and [OK]
❖
Displaying downloaded files
Display a list of downloaded files (applications, images,
document, etc.).
In the Applications menu, [Browser]→m
1
→
[More]→[Downloads]
→
✔
INFORMATION
･
Applications downloaded from Android Market are not
displayed.
[Settings]
→
→
72
Settings
Page 75
◆
Viewing permitted operation of the
applications in the FOMA terminal
From the Home screen, m→
1
[Applications]→[Manage applications]
･
m→Tap [Sort by size]/[Sort by name] to sort
applications.
Select an application
2
･
If all permitted operations do not appear, tap [All].
◆
Deleting application data or cache
From the Home screen, m→
1
[Applications]→[Manage applications]
･
m→Tap [Sort by size]/[Sort by name] to sort
applications.
Select an application→[Clear data]/[Clear
2
cache]
･
For [Clear data], tap [OK].
◆
Uninstalling applications
･
It is recommended to uninstall the applications that are
obtained from Android Market from the Android Market
screen.→P105
･
You cannot uninstall some pre-installed applications by
default. And if pre-installed applications are unistalled,
you can reset the FOMA terminal to restore.
From the Home screen, m→
1
[Applications]→[Manage applications]
･
m→Tap [Sort by size]/[Sort by name] to sort
applications.
Select an application→[Uninstall]→[OK]
2
[OK]
[Settings]
[Settings]
[Settings]
◆
Displaying running services
From the Home screen, m→
1
→
[Applications]→[Running services]→Select
a service name
◆
Checking storage use
From the Home screen, m→
1
[Applications]→[Storage use]
◆
Using application development
function
→
From the Home screen, m→
1
[Applications]→[Development]
･
To use USB debug function, install USB driver to a
PC. For details, refer to the information about this
product in the following site.
http://www.fmworld.net/product/phone/sp/android/
develop/
･
For functions for software developer such as USB
debug or mock location, refer to the following
website.
http://developer.android.com/
❖
Setting not to turn off during charge
From the Home screen, m→
1
[Applications]→[Development]→Mark
→
[Stay awake]
→
→
Perform operations
[Settings]
[Settings]
[Settings]
[Settings]
→
→
→
→
73
Settings
Page 76
Accounts & sync
◆
Adding accounts
From the Home screen, m→
1
[Accounts & sync]→[Add account]
Select an account
2
Set required items
3
･
Tap added account in Manage accounts list to set to
the account.
■
Corresponding applications for each accounts
Accounts displayed in [Add account] list screen
correspond to the following applications and functions in
the FOMA terminal.
･
mixi : mixi, Contacts
･
Twitter : Twitter, Contacts
･
Corporate : Email, Contacts, Calendar
✔
INFORMATION
･
Multiple Google accounts can be added on the FOMA
terminal.
･
Register the Google account set for logging into Picasa
web album as the Google account for the FOMA terminal.
After you have registered a Google account for the FOMA
terminal and then entered that Google account to acquire
a new Picasa account web album, Picasa will not be
displayed as the synchronization item of the Google
account for the FOMA terminal.
◆
Removing accounts
From the Home screen, m→
1
[Accounts & sync]→Select an account
[Remove account]→[Remove account]
[Settings]
[Settings]
→
✔
INFORMATION
･
The Google account you set first cannot be removed in
this operation. To remove the first set Google account,
reset the FOMA terminal
･
docomo account cannot be removed.
→
◆
Setting automatically synchronized
→
P75
Google applications
You can set automatic synchronization for the FOMA
terminal and Google online service contacts, calendar,
Gmail, etc.
From the Home screen, m→
1
[Accounts & sync]→Mark [Background
→
Mark [Auto-sync]→Select an
data]
account in Manage accounts list
item
✔
INFORMATION
･
When [Background data] is marked, automatic data
communications by all applications installed to the
FOMA terminal will be allowed. Furthermore, if the [Autosync] is marked, automatic synchronization of data by
applications will be allowed.
◆
Starting synchronization manually
From the Home screen, m→
1
[Accounts & sync]→Select an account
m→[Sync now]
❖
Canceling synchronization
During synchronization, m→
1
→
sync]
[Settings]
→
Set each
[Settings]
→
[Cancel
→
→
74
Settings
Page 77
Privacy microSD card & phone
storage
◆
Resetting the FOMA terminal
◆
Reset the FOMA terminal to the default state. All installed
applications and saved data to the FOMA terminal are
deleted.
From the Home screen, m→
1
[Privacy]→[Factory data reset]→[Reset
phone]
･
Mark "Erase SD card" to delete data in the micro SD
card.
･
When the screen lock is set, enter the screen unlock
pattern or security code/password.
[Erase everything]
2
A short while after the reset is completed, the FOMA
terminal will be restarted.
✔
INFORMATION
･
To restart when the touch panel is not worked properly,
etc., keep pressing
then the power turns off, after a while, the FOMA terminal
vibrates and the notification LED lights in green. Be sure
to keep pressing until the notification LED turns on.
X
. Phone options is displayed and
[Settings]
Checking the memory space of the
FOMA terminal or microSD card
From the Home screen, m→
→
1
[Storage]
･
The total capacity and the remaining memory of the
microSD card is displayed at the top of the screen
and the remaining memory of the FOMA terminal is
displayed at the bottom of the screen.
◆
Erasing data in microSD card
･
Note that this operation erase all data in the microSD
card.
From the Home screen, m→
1
[Storage]→[Unmount SD card]
･
When precautions about unmount SD card appear,
Tap [OK].
[Erase SD card]→[Erase SD card]
2
･
When the screen lock is set, enter the unlock
pattern/security code/password.
[Erase everything]
3
[Settings]
[Settings]
→
→
75
Settings
Page 78
Searching the FOMA terminal or sites
You can search function in the FOMA terminal or web
pages. Voice search is also available.
<Example> Entering a keyword to search
From the Home screen, m→
1
Enter a keyword
2
Search suggestions appear according to the character
entry.
Voice search : Tap on the right of the entry field
Speak a keyword to microphone.
･
You can use voice search from applications.→P35
Specifying search target : Tap on the left of the
entry field→Specifying search target.
･
Tap on the top right of the search target
selection screen to specify the function in the FOMA
terminal to be searched.
Select a search suggestion
3
◆
Search settings
Make search settings.
From the Home screen, m→
1
m→[Search settings]→Set each item
Google search :
sharing with Google.
･
Mark [Search history] and set an account to use
[Manage search history].
Searchable items :
terminal to be searched.
Clear shortcuts :
suggestions.
Display entry suggestions or set
Specify the function in the FOMA
Delete shortcuts to search
[Search]
[Search]
Lang. & keyboard
･
For ATOK, see "Setting ATOK".→P43
◆
Switching to English display
Change the language to be used to English.
From the Home screen, m→[設定]→[言
1
語とキーボード
✔
INFORMATION
･
Some applications are not displayed in English.
→
･
To change to the Japanese display, operate as follows.
From the Home screen,
keyboard]
◆
Setting the Android keyboard
Set key operation tone of the Android keyboard, entry
suggestion display, etc.
From the Home screen, m→
1
[Lang. & keyboard]→[Android keyboard]
Set each item
❖
Registering to the user dictionary
→
From the Home screen, m→
1
[Lang. & keyboard]→[User dictionary]
m→[Add]
2
Enter a word→[OK]
3
✔
INFORMATION
･
Registered words cannot be used in ATOK.
]→[Select locale]→[English]
m→[Settings]→[Lang. &
→[言語選択]→[日本語
]
[Settings]
[Settings]
→
→
→
76
Settings
Page 79
Voice input & output
◆
Setting voice recognizer
Setting Google voice search
From the Home screen, m→
1
[Voice input & output]→[Voice recognizer
settings]
→
Language :
SafeSeach :
Block offensive words :
◆
Text-to-speech
When a text-to-speech plug-in (TalkBack etc.) is installed in
the FOMA terminal, you can set the read out speed and
language.
･
For using text-to-speech function, installation of voice
data is needed. However, Japanese data is not included
in the voice data installed in the following procedure.
From the Home screen, m→
1
[Voice input & output]→[Text-to-speech
Set each item
Set language for Google voice search.
Set adult filter for images and text.
improper search results
Set whether to display
settings]
[Install voice data]
2
･
[Install voice data] cannot be selected when voice
data is already installed.
Follow the onscreen instructions to install
3
the voice data
[Settings]
[Settings]
Set each item
4
→
Speech rate :
Language :
･
･
Set the text read out speed.
Set the voice unique to the language used
for reading out text.
To play back a sample voice, tap [Listen to an
example].
To enable the settings of application or functions
supporting text-to-speech at all times, mark [Use
my settings].
Accessibility
Enable the accessibility which respond to user operations
with sound and vibration or read out text.
･
By default, accessibility plug-ins are not registered. You
can obtain accessibility plug-ins (SoundBack, KickBack,
TalkBack, etc.) and install to the FOMA terminal to set.
From the Home screen, m→
1
[Accessibility]→Set each item
→
Accesibility :
PWR-Button EndCall :
Set accesibility services to be enabled/
disabled.
power button is pressed.
Set to end a call when the
[Settings]
→
77
Settings
Page 80
Date & time About phone
◆
Set date, time zone, time manually.
By default, date, time zone and time provided by network
are set. You do not need to set them manually.
From the Home screen, m→
1
[Date & time]
Unmark [Automatic]→[Set date]→Adjust
2
the year, month and day
[Select time zone]→Select a time zone
3
[Set time]→Adjust the time→[Set]
4
Mark/Unmark [Use 24-hour format]
5
･
When it is unmarked, [AM] or [PM] can be selected
in [Set time].
[Select date format]→Select an item
6
→
[Settings]
[Set]
◆
Checking profile
From the Home screen, m→
1
[Profile]
→
Your phone number and information saved to [Profile]
can be displayed.
◆
Checking device information and
version
From the Home screen, m→
1
[About phone]
Check items
2
Software Update :
P129
Status :
Check battery status, phone number, network
name and address, IMEI (individual serial number),
etc.
Battery use :
Legal information :
Model number :
Android version/Baseband version/Kernel version,
Check battery usage for each application.
Terms of use of Google.
Build number :
[Settings]
[Settings]
Update software to latest one.
Check Open source license or the
Check the device number.
Check each version or number.
→
→
→
78
Settings
Page 81
Pedometer
Make settings necessary for using pedometer.
･
When the pedometer is set, you can use applications
which utilize pedometer data such as Health checker.
･
By setting body height and weight, you can obtain
accurate pedometer information. However the body
height and weight data does not link with the application
using the pedometer information.
❖
Precautions on using Pedometer
･
To count steps accurately, it is recommended that you
wear the pedometer correctly (place it in a carrying case
and attach the case to the waist belt etc. or when putting
the terminal in a bag, put it in a pocket or between
partitions), and walk at the speed of 100-120 steps per
minute.
･
Even when you wear the pedometer correctly, if your
walking does not reach to the FOMA terminal, your
steps may not be counted accurately.
･
Steps may not be counted accurately in the following
cases.
- When the FOMA terminal moves randomly as the bag
you put the FOMA terminal in hits your legs or hip, or
when hanging the FOMA terminal down from your hip
or bag.
- When shuffling, walking randomly wearing sandals or
geta (wooden clogs), or when your walking pace was
slowed down because of walking in the crowded area
etc.
- When you had a lot of up-and down motion, shaking or
horizontal movement like repeating standing and
sitting, climbing up and down steep stairs, or vehicles
(bicycle, car, train, bus, etc.)
- When you jogged or did some sports other than
walking, or walked extremely slowly.
･
When adding shake or swing to the FOMA terminal,
counting steps may not be performed accurately.
◆
Setting Pedometer
From the Home screen, m→
1
[Pedometer]
Mark [Pedometer use]→Enter [Height] and
2
✔
INFORMATION
･
At the beginning of walking, the figure is not changed
because the Pedometer is judging to prevent miscount
whether you started walking. As a guide, when you
walked for about 4 seconds, the steps to there are added
at a time.
･
Counted number of steps is saved every 60 minutes. If the
battery pack is removed from the FOMA terminal before
the terminal power is turned OFF, unsaved steps and
activity amount may be lost.
･
By malfunction, repair or other treatments of the FOMA
terminal, the information of steps may be lost. And the
information of steps is retained for about a month even
with the battery removed or vacant, but they may be lost
if more time passes. Note that, even if the information of
steps are lost, DOCOMO assumes no responsibility for
the loss of any data.
→
[Weight]
Deleting all pedometer logs : [Delete all logs]→[Yes]
[Register]
[Settings]
→
79
Settings
Page 82
Mail/Internet
Mail types available on the FOMA terminal
You can use the following types of mails.
■
Mail accounts provided by mopera U and general service
providers can be set to the FOMA terminal so that email
can be sent and received just like you can on a PC.
■
sp-mode mail
You can send and receive mail using i-mode mail address
(@docomo.ne.jp).
■
Gmail
Gmail is a Google online email service. Emails sent and
received by Gmail on the FOMA terminal can also be
checked in a PC's browser.
■
SMS
Short text messages addressed to a mobile phone number
can be sent and received.
Email
Set mail accounts provided by mopera U or general
providers to use Email.
◆
Setting mopera U mail account
Set mopera U account to use mopera U mail.
･
The mailbox capacity of mopera U mail is approximately
50 Mbytes. Each mail can be sent or received with an
attachment of up to about 5 Mbytes.
■
Using a POP server
From the Applications menu, [Email]
1
[Email address]→Enter the mopera U mail
2
3
4
5
6
7
8
→
address
password
[Username]→Enter mopera U user ID
[Password]→Enter mopera U password
[POP3 server]→Enter "mail.mopera.net"
[Security type]→Select a security
Check entered settings→[Next]
[SMTP server]→Enter "mail.mopera.net"
Check the entered mopera U user name and
password
In the option settings screen, set the email
check [Inbox check frequency], etc.
On the mail account registration screen,
[Your name]
[Password]→Enter mopera U
→
[Manual setup]→[POP3]
→
[Next]
→
[Next]
→
enter your name→[Done]
→
→
→
80
Mail/Internet
Page 83
◆
Setting up a general provider mail
account
･
Obtain the information required for setting up the mail
account from your service provider in advance.
From the Applications menu, [Email]
1
[Email address]→Enter a mail address
2
[Password]→Enter a password→[Next]
From here on, follow the onscreen instructions.
✔
INFORMATION
･
If automatic setting of the mail account does not
complete, tap [Manual setup] in Step 2, and manually
enter the account settings.
･
With some service providers, settings for "OP25B
(Outbound Port 25 Blocking): spam mail transmission
blocking" are needed. For details, contact the service
provider you are subscribed to.
･
If you have already set a mail account and want to add on
another mail account, on the mail list, tap
[Accounts]→m→[Add account]
m
→
→
◆
Setting reception for each mail
account
❖
Setting automatic checking of new
email
From the Applications menu, [Email]
1
･
If you have several mail accounts, select a mail
account from the account list.
m→[Account settings]→[Inbox check
2
frequency]
✔
INFORMATION
･
When you set to connect to the mail server at regular
intervals and if you use the pay-as-you-go plan data
communication, charges will be incurred each time new
mail is checked.
❖
Setting new mail notification
From the Applications menu, [Email]
1
･
m→[Account settings]
2
Set each item
3
Email notifications :
Select ringtone :
Vibrate :
→
Select check frequency
If you have several mail accounts, select a mail
account from the account list.
there is new email by notification icon on the status
bar.
new email.
vibration.
Set whether to notify you that
Set the ringtone for notifying you of
Set whether to notify you of new mail by
81
Mail/Internet
Page 84
◆
Composing and sending email
From the Applications menu, [Email]
1
･
To send from another mail account, select a mail
account from the account list.
･
If the combined inbox is displayed, email is sent
from the mail account marked in the account list
screen.
m→[Compose]
2
[To]→Enter an address
3
･
To add a Cc or Bcc, m→
[Subject]→Enter a subject
4
[Compose Mail]→Enter a message
5
･
To attach a file, m→
file.
[Send]
6
✔
INFORMATION
･
Email is handled as email from a PC. If the receiver sets
rejection of emails from PCs, the email cannot be sent.
◆
Receiving/Displaying emails
From the Applications menu, [Email]
1
･
If you have several mail accounts, select a mail
account from the account list.
･
If you tap the [Combined inbox] in the account list
screen, an inbox containing a mixture of emails for
all mail accounts is displayed. Each of the mail
accounts is distinguished by a color bar leading
emails.
To refresh the inbox, m→
2
Select an email
3
Tap [Add Cc/Bcc].
[Add attachment]→Select a
[Refresh]
✔
INFORMATION
･
If Inbox check frequency (→P81) and Email notifications
in Account settings (
appears on the status bar. Open the Notification panel
and tap the notification to display the inbox.
◆
Replying to an email
Display an email→[Reply]/[Reply all]
1
[Compose Mail]→Enter a message→[Send]
◆
Forwarding emails
Display an email→m→[Forward]→[To]
1
→
Enter a mail address→[Send]
◆
Deleting emails
Display an email→[Delete]
1
◆
Backing up/Restoring Email
You can back up emails to the microSD card and restore
them to the FOMA terminal.
From the Applications menu, [Email]
1
m→[Accounts]→m→[Backup/
Restore]
[Backup]/[Restore]→[Start]→[OK]
2
→
P81) are set, notification icon
→
→
82
Mail/Internet
Page 85
sp-mode mail
You can send and receive mail using i-mode mail address
(@docomo.ne.jp).
Pictograms and deco-mail can be used, and automatic
reception also is supported.
･
For details on sp-mode mail, refer to “
ク
(sp
モード<スマートフォン>編
Guide [sp-mode <Smartphone>] (in Japanese only)”.
From the Applications menu, [sp
1
ル
(sp-mode mail)]
From here on, follow the onscreen instructions.
ご利用ガイドブッ
) Mobile Phone User's
モードメー
Gmail
Gmail is a Google online email service. You can send and
receive emails using Gmail on the FOMA terminal.
･
To use Gmail, you need to set up a Google account on
the FOMA terminal. If a Google account is not yet set,
follow the onscreen instructions that are displayed when
Gmail is activated for the first time.
◆
Opening Gmail
From the Applications menu, [Gmail]
1
A list of message threads is displayed in the inbox.
■
Message thread
In Gmail, emails are displayed in groups as a message
thread each time you reply to an email. If new emails are
replies to existing emails, those emails are grouped
together in the same message thread. If the subject of new
email or existing email is changed, a new message thread
is created.
❖
Switching Gmail account
In the inbox, m→
1
Select a Gmail account
2
❖
Refreshing Gmail
In the inbox, m→
1
The inbox is refreshed with Gmail on the FOMA
terminal and Gmail on the website synchronized with
each other.
◆
Composing and sending email by
[Accounts]
[Refresh]
Gmail
In the inbox, m→
1
[To]→Enter a mail address
2
･
To add a Cc or Bcc, m→
[Subject]→Enter a subject
3
[Compose Mail]→Enter a message
4
･
To attach an image, m→
image.
[Compose]
Tap [Add Cc/Bcc].
[Attach]→Select an
5
✔
INFORMATION
･
Gmail is handled as email from a PC. If t he receiver sets
rejection of emails from PCs, the email cannot be sent.
83
Mail/Internet
Page 86
◆
Displaying sent emails in Gmail
In the inbox, m→
1
◆
Displaying new email in Gmail
Select a message thread containing unread
1
email in the inbox
✔
INFORMATION
･
When Email notifications (→P84) is set, the notification
icon is displayed on the status bar. Open the Notification
panel and tap the notification to display the inbox.
･
The sender name of a received email is the name set by
the sender and not a name saved in the contact.
◆
Searching emails in Gmail
In the inbox, m→
1
Enter a keyword in the search box
2
◆
Replying to emails in Gmail
Display an email
1
[Compose Mail]→Enter a message
2
◆
Forwarding emails in Gmail
Display an email
1
[To]→Enter a mail address
2
[Go to labels]→[Sent]
[Search]
→→
[Reply]/[Reply to all]
→→
[Forward]
→
→
→
◆
Message thread operations in Gmail
The following operations can be performed by touching
and holding a message thread in the inbox for 1 second or
more.
Read :
Unfold a message thread.
Archive :
Archive (store) message thread. Archived
messages are not displayed in the inbox.
Mute :
Hide message thread.
Mark unread/Mark read :
read.
Delete :
Delete message thread.
Add star/Remove star :
thread.
Change labels :
Report spam :
Help :
Use Google Online Help.
✔
INFORMATION
･
Archived or muted message threads no longer displayed
in the inbox can be viewed by tapping
labels]
→
[All Mail].
･
Labels cannot be made on the FOMA terminal. Make
them at the Gmail website.
◆
Setting new email notification in
Mark message thread as unread/
Add or remove star from message
Add or change label of message thread.
Report received email as spam.
m→[Go to
Gmail
In the inbox, m→
1
Set each item
2
Email notifications :
there is new email by notification icon on the status
bar.
Select ringtone :
new email.
Vibrate :
Set whether to notify you of new mail by
vibration.
Notify once :
Set notification method for multiple new
emails.
[More]→[Settings]
Set whether to notify you that
Set the ringtone for notifying you of
84
Mail/Internet
Page 87
SMS
You can send and receive text messages up to 70 twobyte characters long (up to 160 one-byte characters for
only alphanumerics) addressed to a mobile phone
number.
◆
Composing and sending SMS
From the Applications menu, [Messaging]
1
[New message]
[To]→Enter a mobile phone number
2
[Type to compose]→Enter a message
3
[Send]
✔
INFORMATION
･
SMS can be also sent to or received from the parties
using overseas service providers except DOCOMO. For
countries and overseas network operators available, refer
to "Mobile Phone User's Guide [International Services]"
or DOCOMO International Services website.
･
To send to users of overseas network operators other
than DOCOMO, enter "+", "Country code" and then "the
recipient mobile phone number". You can also enter
"010", "Country code" and "the recipient mobile phone
number" to send messages. (To reply to the received
SMS overseas, enter "010".) Enter the phone number
without a leading "0", if any.
･
To set SMS reception report, from the Applications
menu, [Messaging]
reports].
→m→
[Settings]→Mark [Delivery
→
◆
When SMS is received
When SMS is received, the notification icon appears on the
status bar. Open the Notification panel to check new SMS.
✔
INFORMATION
･
You cannot check for any SMS in the SMS center from
the FOMA terminal.
･
If the FOMA terminal is initialized and an SMS is received
right after rebooting, ringtone and vibrator may not work
regardless of notification settings for new SMS.
→
･
SMS cannot be received when the FOMA terminal is low
on memory. Delete unnecessary applications to obtain
memory space.
◆
Displaying received SMS
From the Applications menu, [Messaging]
1
Select a message thread
2
◆
Replying to SMS
From the Applications menu, [Messaging]
1
Select a message thread→[Type to
2
compose]
◆
Forwarding SMS
From the Applications menu, [Messaging]
1
Select a message thread→Select SMS (1
2
sec. or more)
[To]→Enter a mobile phone number
3
[Send]
→
P73, 105
→
Enter a message→[Send]
→
[Forward]
→
85
Mail/Internet
Page 88
◆
Deleting SMS
<Example> Deleting an SMS
From the Applications menu, [Messaging]
1
Select a message thread→Select an SMS (1
2
sec. or more)
Deleting message thread : Select a message thread (1
sec. or more)→[Delete thread]
Deleting all message threads : m→
threads]
[Delete]
3
◆
Setting SMS auto delete
From the Applications menu, [Messaging]
1
m→[Settings]
Mark [Delete old messages]→[Message
2
limit]
Enter a message limit for each message
3
thread
✔
INFORMATION
･
You can protect SMS from being deleted by the following
operation.
From the Applications menu, [Messaging]
message thread
message]
◆
Backing up/Restoring SMS
You can back up SMS to the microSD card and restore
them to the FOMA terminal.
From the Applications menu, [Messaging]
1
m→[Settings]→[Backup]
[Backup]/[Restore]→[Start]→[OK]
2
→
[Delete message]
→
[Set]
→
Select an SMS (1 sec. or more)→[Lock
[Delete
→
Select a
◆
Copying SMS from UIM
You can copy SMS saved on UIM of another FOMA
terminal to the FOMA terminal.
･
SMS in the FOMA terminal cannot be copied to the UIM.
From the Applications menu, [Messaging]
1
m→[Settings]→[Manage SIM card
messages]
Select SMS (1 sec. or more)→[Copy to
2
phone memory]
･
To delete SMS, select SMS (1 sec. or more)→Tap
[Delete]→[OK].
✔
INFORMATION
･
To reply or forward from SMS on UIM, copy it to the
→
FOMA terminal in advance.
◆
Setting new SMS notification
From the Applications menu, [Messaging]
1
m→[Settings]
Set each item
2
→
Notifications :
new SMS by notification icon on the status bar.
Select ringtone :
new SMS.
Vibrate :
vibration.
Set whether to notify you that there is
Set the ringtone for notifying you of
Set whether to notify you of new SMS by
86
→
→
Mail/Internet
Page 89
Early warning "Area Mail" Google Talk
This is a service with which you can receive emergency
earthquake flash report delivered by the Meteorological
Agency etc.
･
Area Mail is a free service and subscription is not
required.
･
Area Mail cannot be received when the power off,
during a call, in Airplane mode, during Wi-Fi tethering
communication, while sending/receiving an SMS,
during packet communication or international roaming,
while displaying PIN unlock screen, when the FOMA
terminal is low on memory, etc.
･
Area Mail that could not be received cannot be received
later.
･
Area Mails are saved in Messaging. Precautions for
receiving and operation methods of displaying, deleting,
etc. are the same as that of SMS.→P85
◆
When receiving early warning "Area
Mail"
When Area Mail is received, the buzzer alarm or the Area
Mail ringtone sounds, the notification icon appears on the
status bar, and the content screen is displayed. Open the
Notification panel to check the Area Mail.
･
The buzzer alarm or the Area Mail ringtone sounds for
up to approximately 10 seconds in maximum volume.
The setting cannot be changed.
･
If an Area Mail is received in Manner mode or Public
mode (Drive mode), the terminal operates according to
the settings for each mode.
◆
Setting Early Warning "AreaMail"
Set whether to recieve Area Mail.
From the Applications menu, [Messaging]
1
m→[Settings]→Mark/Unmark [Receive
setting]
→
Google Talk is an online instant message service provided
by Google. You can enjoy chat with Google members by
using Google Talk on the FOMA terminal.
･
To use Google Talk, you need to set up a Google account
on the FOMA terminal. If a Google account is not yet set,
follow the onscreen instructions that are displayed when
Google Talk is activated for the first time.
◆
Online chat
❖
Activating Google Talk
From the Applications menu, [Talk]
1
The Friends list is displayed.
❖
Adding new members
In the Friends list, m→
1
Enter a Google account of the member
2
[Send invitation]
✔
INFORMATION
･
Tap m→
display invitations waiting to be replied. If a party accepts
or rejects received invitation, that party is deleted from
the list of invitations waiting to be replied.
❖
1
[More]→[Invites] on the Friends list to
Accepting an invitation
In the Friends list, tap [Chat invitation]
[Accept]
[Add friend]
→
→
87
Mail/Internet
Page 90
❖
Setting online status
In the Friends list, select your name
1
Selecting online status
2
･
If necessary, enter a status message in the [Status
message]. Status messages you have entered are
displayed as custom messages the next time you
select online status.
✔
INFORMATION
･
If you stop chatting midway for a while, the online status
icon may change to a clock mark. This mark is no longer
displayed if both parts resume chat.
❖
Starting chat
In the Friends list, select the name of a
1
friend
The chat screen is displayed.
[Type to compose] →Enter a message
2
･
To attach pictogram, m→
smiley]→Select pictogram.
[Send]
3
❖
Switching between active chats
You can switch between chats when two or more chats are
active.
In the chat screen, m→
1
Select a member
[More]→[Insert
[Switch chats]
❖
Setting chat to off record
Chat messages are saved to the [Chat] label in Gmail.
However, saving can be disabled by setting chat to off
record.
In the chat screen, m→
1
All messages from here on will be off record.
✔
INFORMATION
･
To cancel off record, in the chat screen, m→
on record].
❖
Ending chat
In the chat screen, m→
1
◆
Managing members
Members in the Friends list are displayed by online status
(online, busy and offline).
Depending on your settings, priority is sometimes given to
only members with a frequent email or chat history in the
displayed Friends list. To display all currently registered
members, in the Friends list, m→
✔
INFORMATION
･
To return the display to only members with a frequent
email or chat history,
Friends list.
❖
Blocking members
→
You can block reception of messages sent from specific
members.
In the Friends list, tap the name of the
1
member (1 sec. or more)
The blocked member is deleted from the Friends list.
✔
INFORMATION
･
To unblock, in the Friends list, m→
→
Select a member to unblock→Tap [OK].
m→Tap [Most popular] in the
[Chat off record]
[End chat]
Tap [All friends].
→
[Block friend]
[More]→[Blocked]
88
Tap [Chat
Mail/Internet
Page 91
❖
Displaying member information
In the Friends list, select a name of the
1
member (1 sec. or more)
･
To display all members, m→
[Friend info]
2
･
If you enter a nickname, the nickname will be
displayed in the Friends list.
When you finish checking, tap [Done]
3
◆
About the mobile indicator
When a member is currently logged in from an Android
mobile phone, the mobile indicator ( ) is displayed at
the right of the member's name in the Friends list.
The following setting can be used to show or hide your
mobile indicator in the Friends list of other members.
In the Friends list, m→
1
[Mobile indicator]
Tap [All friends].
[Settings]→Mark
◆
Setting new message notification
In the Friends list, m→
1
Set each item
2
IM notifications :
is a new message by the notification icon on the
status bar.
Select ringtone :
new messages.
Vibrate :
by vibration.
◆
Setting automatic sign-in
You can set to sign in to Google Talk automatically when
you turn on the FOMA terminal.
In the Friends list, m→
1
[Automatically sign in]
◆
Signing out
In the Friends list, m→
1
Set whether to notify you that there
Set the ringtone for notifying you of
Set whether to notify you of new messages
[Settings]
[Settings]→Mark
[Sign out]
89
Mail/Internet
Page 92
Browser
You can view web pages like on a PC using Browser.
On the FOMA terminal, Browser can be used over a packet
transmission or Wi-Fi connection.
◆
Operation while viewing website
■
Switching web page in portrait/landscape view
Hold the FOMA terminal vertically or horizontally to switch
the portrait/landscape view.
■
Zooming in/out on web page
You can zoom in/out on pages by the following operations.
Pinch-out/Pinch-in :
Double-tap :
･
To return to the view before it is zoomed in, double-tap
again.
Zoom control :
Tap to zoom in and tap to zoom out.
･
The current magnification ratio is kept when you open a
web page next time. Tap the icon displayed when you
zoom in/out a web page to valid ( )/invalid ( )
takeover of the magnification status.
■
Scroll/Pan
Scroll the screen up/down or left/right or pan in all
directions to display the desired part of the screen.
◆
Activating Browser to display a
website
From the Applications menu, [Browser]
1
The preset home page is displayed.
Enter the URL/keyword in the address bar
2
Select /website
3
Zoom in/out.
Zoom in.
Flick the screen to display the zoom control.
◆
Opening a new browser window
･
You can open up to 8 browser windows.
When a web page is displayed, m→
1
[Windows]
[New]
2
A new browser window opens in the preset home
page.
Switching : Display Browser window in the center
Select Browser window
Closing : Display Browser window in the center
✔
INFORMATION
･
Alternatively, when a web page is displayed, m→
[New window] to open a new browser window.
◆
Displaying web pages from history
When a web page is displayed, m→
1
[Bookmarks]→[History]
Select a history type
2
･
To display the history of frequently viewed web
pages, tap [Most visited].
Select a history of the web page
3
→
→
Tap
90
Mail/Internet
Page 93
◆
Registering a bookmark to quickly
display a web page
❖
Registering a bookmark
When a web page is displayed, m→
1
[Bookmarks]
A list of Bookmarks is displayed.
･
m→Tap [List view]/[Thumbnail view] to switch
between list view and thumbnail view.
[Add]
2
･
In the list view, tap [Add bookmark].
[OK]
3
❖
Displaying web pages from
bookmarks
When a web page is displayed, m→
1
[Bookmarks]
Select a bookmark
2
Editing : Select a bookmark (1 sec. or more)→[Edit
bookmark]→Set required items→[OK]
Deleting : Select a bookmark (1 sec. or more)
[Delete bookmark]→[OK]
◆
Backing up/Restoring bookmarks
Back up bookmarks to microSD card and restore them to
the FOMA terminal.
When a web page is displayed, m→
1
[More]→[Settings]→[Backup]
[Backup]/[Restore]→[Start]→[OK]
2
→
◆
Changing web page display mode
❖
Displaying web pages constantly in
the landscape mode
When a web page is displayed, m→
1
[More]→[Settings]→Mark [Landscape-only
display]
❖
Changing the default zoom
You can set the magnification ratio for when a web page is
double-tapped.
When a web page is displayed, m→
1
[More]→[Settings]→[Default zoom]
Select magnification ratio
❖
Changing text size
When a web page is displayed, m→
1
[More]→[Settings]→[Text size]→Select a
text size
◆
Web page link operations
The following operations are possible when a link
displayed on a web page is tapped.
URL
･
Tap :
Open web page.
･
Touch and hold for 1 second or more :
bookmark, send URL via mail or copy URL.
Email address
･
Tap :
Compose email.
･
Touch and hold for 1 second or more :
address.
Phone number
･
Tap :
Make a call to the phone number.
･
Touch and hold for 1 second or more :
phone number to Contacts.
→
Register URL as a
Copy email
Add/Copy a
91
Mail/Internet
Page 94
File
･
Tap :
View/Save a file.
･
Touch and hold for 1 second or more :
✔
INFORMATION
･
Saved files can be checked in ThinkFree Office or the list
of downloaded files.
･
Files cannot be downloaded from a website which
requires Basic authentication or SSL communication.
◆
Saving images displayed on a web
Save a file.
page
When a web page is displayed, select an
1
image (1 sec. or more)
･
Saved images can be checked in Gallery (→P97) or
the list of downloaded files.
◆
Copying text on a web page
You can use copied text pasting in other applications, etc.
When a web page is displayed, m→
1
[More]→[Select text]→Slide your finger
over the text
Selected text is highlighted in orange.
Select highlighted text
2
･
To paste the copied text, select an inserting point in
the character entry screen (1 sec. or more)→[Paste].
◆
Setting a home page
You can set the home page that is displayed when Browser
is activated or a new browser window is opened.
When a web page is displayed, m→
1
[More]→[Settings]→[Set home page]
Enter a URL→[OK]
→
[Save image]
→
◆
Clearing history or cache
When a web page is displayed, m→
1
[More]→[Settings]→[Clear cache]/[Clear
history]/[Clear all cookie data]/[Clear form
data]/[Clear location access]/[Clear
passwords]
◆
Setting security
When a web page is displayed, m→
1
[More]→[Settings]→Set required items
Enable JavaScript :
security level.
Enable plug-ins :
prohibits use of Browser's extended functions and
can increase security level.
Accept cookies :
saving and reading of cookies can increase security
level.
Remember passwords :
disable saving of user names and passwords for
sites that were entered during browsing of web
pages can increase security level.
Show security warnings :
is detected when this item is marked, a warning is
displayed. To protect security, we recommend not
unmarking this item.
✔
INFORMATION
･
Some web services might no longer be available if
cookies are prohibited.
→
[OK]
Unmarking this item can increase
Setting [On demand] or [Off]
Unmarking this item to prohibit
Unmarking this item to
If a problem in site security
92
Mail/Internet
Page 95
Multimedia
Camera
◆
Cautions on shooting
･
Although the camera is manufactured using extremely
high-precision technology, it may contain dots or lines
that are always lit or that do not light. When shooting
under low light conditions, in particular, white lines or
random color dots are likely to appear as noises. This is
not a malfunction.
･
When activating the camera, white stripes may appear
on the screen. This is not a malfunction.
･
The captured images may be different from actual
objects for color and brightness.
･
If you try to shoot an intense light source directly like the
sun etc., the images may be dark or noisy.
･
Fingerprints or body oil on the lens can affect images.
Wipe with a soft cloth before shooting.
･
The battery consumption is faster when using the
camera.
･
Shutter sound etc. is emitted even in Manner mode or
Public mode.
･
Keep approximately 8-10 cm away from the object when
Focus mode is set to [Macro], and at least 8 cm when
Scene mode is set to [Auto].
･
The distance that the camera can focus on with autofocus function is more than approximately 30 cm when
Focus mode is set to [Auto]. And the preferable distance
is approximately 8-40 cm when AF mode is set to
[Macro].
･
Taken still images/moving pictures are automatically
saved to the microSD card. Attach the microSD card
before shooting pictures.→P24
Copyrights and portrait rights
Avoid reproducing, altering, or editing taken or
recorded pictures or sounds using the FOMA terminal
without the copyright holder's authorization, because,
except for personal use etc.,they are prohibited by the
Copyright law. Avoid using or altering pictures of
others without their consent, because they may
infringe on portrait rights.
Note that taking photos or recordings at some
demonstrations, performances or exhibitions may be
prohibited even when only for personal use.
Take care not to infringe on privacy when
shooting or sending images with the phone
equipped with camera.
If you cause the public any trouble using the FOMA
terminal, you may be punished under law or
regulations (for example, nuisance prevention
ordinance).
93
Multimedia
Page 96
◆
Viewing shooting screen
a
b
c
d
Still camera shooting screen
a
b
c
d
e
f
g
h
i
◆
1
Video camera shooting screen
Scene mode icon
Menu tab(Menu on the left)
Focus frame, face detection frame
Name of detected person (Find-me focus)
Shoot setting menu
View/Play last saved still image/moving picture
Switch between still image shooting and moving
picture shooting
Shutter button
Start recording/End recording buttons
Still image shooting
From the Applications menu, [Camera]
Display an object on the shooting screen
Shutter sound is heard and a still image is shot.
e
e
■
Main operations on the still image shooting
screen
f
g
h
f
g
i
Zoom (Max.)/Deactivating zoom : Double-tap in the
shooting screen
Displaying Gallery : m→
◆
Shoot setting menu for still images
The following operations can be performed with the
buttons on the still image shooting screen.
･
Some items cannot be selected depending on the
combinations.
･
Changing the settings may change another setting
automatically.
❖
Menu on the left
Tap or slide the Menu tab displayed on the still image
shooting screen to open the following menu.
■
Best shot
Takes 7 shots before and after the shooting operation.
After shooting, the FOMA terminal recommends the best
shot.
･
The recommended best shot is decided according to
smile, blink or blur.
■
Scene mode
Changes shooting settings according to the objects or
situations.
･
When [Auto] is set, the shooting setting is switched to
the most suited scene mode (Auto, Portrait, Night,
Landscape, Macro). Also, if a QR code is recognized on
the shooting screen, the FOMA terminal automatically
reads the data.
■
→
Smile shot
If the smile of an object person is big enough for the preset
→
value, the camera can automatically shoot.
■
Store location
Switches ON/OFF of recording location information.
[Gallery]
94
Multimedia
Page 97
❖
Menu on the right
■
Focus mode, Chase focus, Touch AF, Search me
focus, Exposure, Color effect, Adjust flicker,
Camera settings
Focus mode :
Chase focus :
Touch focus:
Search me focus :
･
･
Exposure :
Color effect：Make settings for color effect.
Adjust flicker :
･
Camera settings :
･
■
Adjust coloring to match the surrounding light source.
■
Switch the flash between Auto, ON and OFF.
■
Specify the image size.
■
Set auto timer.
Change auto focus mode according to the
object.
Track an object keeping it into focus.
The focus locks on the area you touch or the
detected face frame.
recognition data for Find-me focus, the face is
automatically recognized and the name appears.
Registered face is given priority of focus and brightness
adjustment.
If there are multiple registered faces, the face detection
frame of the person highly prioritized number given
becomes red.
stripe pattern emerges under a fluorescent lamp.
If it is not enough for shooting with [Auto], set according
to the area you use.
default setting.
Individual recognition data for Search me focus is not
deleted.
If a face is registered as individual
Make setting for image brightness.
Reduce the flicker effect which a flicker or
Restore each camera setting to the
White balance
Flash mode
Picture size
Self timer
■
Zoom
Change zoom ratio to magnify an object for shooting.
◆
Moving picture shooting
From the Applications menu, [Video
1
camera]
→
screen
Sooting start sound is heard and a shooting is started.
2
Sooting end sound is heard and a shooting is finished.
■
Main operations on the moving picture shooting
screen
Zoom (Max.)/Deactivating zoom : Double-tap in the
shooting screen
･
Zoom ratio cannot be changed while shooting a moving
picture.
Displaying Gallery : m→
◆
Shoot setting menu for moving
Display an object on the shooting
→
[Gallery]
pictures
The following operations can be performed with the
buttons on the moving picture shooting screen.
･
Some items cannot be selected depending on the
combinations.
■
Focus mode, Exposure, Color effect, Scene
mode, Adjust flicker, Camera settings
Focus mode :
object.
Exposure :
Color effect :
Scene mode :
objects or situations.
Change auto focus mode according to the
Make setting for image brightness.
Make settings for color effect.
Change shooting settings according to the
95
Multimedia
Page 98
Adjust flicker :
stripe pattern emerges under a fluorescent lamp.
･
If it is not enough for shooting with [Auto], set according
to the area you use.
Camera settings :
default setting.
■
Adjust coloring to match the surrounding light source.
■
Switch the flash between ON and OFF.
■
Video quality :
Video size :
Video audio :
sound.
■
Set auto timer.
■
Change zoom ratio to magnify an object for shooting.
･
Zoom ratio is an estimated value.
Reduce the flicker effect which a flicker or
Restore each camera setting to the
White balance
Flash mode
Video quality, Video size, Video audio
Specify the picture quality.
Specify the picture size.
Switch between On and Off for recorded
Self timer
Zoom
Barcode Scanner
You can read and use information of JAN code (JAN8 and
JAN13), NW7 code, CODE39 code and QR code.
･
The code may not be read depending the version of QR
code (type or size).
･
The code may not be read due to the scratch, dirt, print
quality, light reflection, etc.
◆
Reading barcode
･
If the code is difficult to read, adjust the distance, angle
or direction between the code and camera to make it
easy to read.
From the Applications menu, [Barcode
1
Scanner]
→
Display a code on the shooting
screen
The code is automatically read.
When reading the divided data :
You can combine data divided into multiple QR codes
(up to 16) and display the combined data.
Switching still image shooting/moving picture
shooting : m→
images]/[Video]
Lamp ON/OFF : m→
Displaying history : m→
Displaying Help : m→
Changing flicker adjustment : m→
→
Select Auto/50Hz (East Japan)/60Hz (West
Japan)
Check the read data
2
Saving data : m→
field
❖
Using the barcode
Use the scanned barcode data on the read result screen.
Registering Contacts all at once : m→
contacts]→Set each item→[Done]
Creating a mail : Select mail address
Connecting the site or website : Select URL
Register URL to Bookmarks : m→
bookmarks]
Making calls : Select a phone number→[Phone]
[Camera switch]→[Still
[Turn ON/OFF picture light]
[History]
[Help]
[Save to history]→Tap history
[Adjust flicker]
[Batch register
[Register in
96
Multimedia
Page 99
Gallery
Display/play pictures (still images or moving pictures)
saved in a microSD card shooting with the camera or
downloading.
･
The following file types of data can be displayed/played.
Still image : JPEG, BMP, GIF, PNG
Moving picture : WMV, H.264, H.263, MPEG4
◆
View/Play pictures
From the Applications menu, [Gallery]
1
Select an album→Select an image
･
appears for a moving picture in the image list
screen.
･
Flick the screen left and right to switch between the
previous and next screen.
✔
INFORMATION
･
Tap at the top right of the album list screen to activate
Camera.
･
Tap of at the top right of the image list
screen to sort images by date. When you tap the date
album, all images are listed. However, images in the
selected album appear with the thicker frames.
❖
Operation while viewing a still image
･
/ zooms out/in.
･
Tap [Slideshow] to view images one after another.
･
Select [Menu]→[Share] to select sending method and
send a still image.
･
Select [Menu]→[Delete] to delete a still image.
･
Select [Menu]→[More] to check detailed information,
set images to icons on the wallpaper or contacts, crop
and rotate to the left and right.
→
❖
Operation while playing moving
pictures
･
SD
to adjust volume.
･
Tap the screen to display keys or progress bar. You can
play/pause/rewind/fast forward with them.
❖
Operation in the image list screen
･
Touch and hold an image for 1 second or more, the
image is marked and selected Tap the image to cancel
selection.
･
When you select an image, tap [Select All]/[Deselect All]
at the top of the screen to select/cancel all images.
･
When you select a still image, tap [Share]/[Delete]/
[More] to perform the same operation as when viewing
a still image.
･
The following operations are possible when you select a
moving picture.
- Tap [Share] to select sending method and send a
moving picture.
- Tap [Delete] to delete a moving picture.
- Tap [More] to check detailed information on the
moving picture.
Music player
You can play back music saved on the microSD card using
a music player.
･
For details on how to forward music files to the microSD
card from a PC, see "Operating data on a microSD card
from a PC".→P103
･
File format/codec that can be played back are as follows.
However, some files may not be played back.
WMA, AAC, MP3, AMR, OGG Vorbis, WAVE (PCM),
MIDI, XMF/MXMF, RTTTL/RTX, OTA, iMelody
97
Multimedia
Page 100
◆
Playing music
From the Applications menu, [Music]
1
[Artists]/[Albums]/[Songs]/[Playlists]
･
When you tap [Songs], go to Step 3.
Select an item
2
･
Tap an item for 1 s econd or more and then tap [Play]
to play back all songs in the item.
Select a song
3
❖
Operations in the playback screen
a
b
c
d
e
a
Display a list of songs in item including a song
currently played
b
Shuffle ON/OFF
c
Repeating all songs./Repeating current song./
Repeating off.
d
[Artists]/[Albums]/[Songs]
Touch and hold for 1 second or more to search related
contents
e
Tap within 2 seconds in play time to jump to the
previous song/Tap after a lapse of 2 seconds in play
time to jump to the beginning of the song/Touch and
hold for 1 second or more to rewind
f
Pause/Playback
g
Jump to the next song/Touch and hold 1 second or
more to fast forward
h
Slide to specify the playback position
SD
: Adjust volume
f
g
h
◆
Creating playlists
→
On the playback screen, m→
1
❖
1
❖
1
❖
1
◆
1
2
3
→
playlist]
[Save]
[New]→Enter playlist name
Adding songs to a playlist
On the playback screen, m→
playlist]
→
Select a playlist
Sorting songs in playlist
In the playlist screen, select the playlist
Drag of a song to move to a destination
Removing songs from a playlist
In the playlist screen, select the playlist
Select a song (1 sec. or more)→[Remove
from playlist]
Set to a ringtone
From the Applications menu, [Music]
[Artists]/[Albums]/[Songs]/[Playlists]
･
When you tap [Songs], go to Step 3.
Select an item
Select a song (1 sec. or more)→[Use as
phone ringtone]
98
[Add to
→
[Add to
→
→
→
Multimedia
Loading...