Before using your terminal, or when necessary, read this
manual to ensure safe use and handling.
Learning operations
"Quick Start Guide" (in Japanese only)
This manual provides information about screens and
operations of basic functions.
"Instruction Manual" app (e-manual) (installed in the
This manual provides information and operations of all the
functions.
<Operation steps>
Manual]→Select a search method
If you delete "Instruction Manual", you can access Google
Play from Play Store to install again.
<Operation steps>
→
Search "
説明書
This manual provides information and operations of all the
functions.
〈
From PC〉 http://www.nttdocomo.co.jp/english/support/
trouble/manual/download/index.html
*You can download the latest information.
terminal) (in Japanese only)
From the Application menu, [Instruction
From the Application menu, [Play Store]
取扱説明書
(Instruction Manual)"→[Install]
(Instruction Manual)" and select "
"INSTRUCTION MANUAL" (PDF file)
取扱
・
Viewing this manual
In this manual, "F-02E" mobile terminal is usually referred to
as "the terminal".
・
The images or illustration used in this manual are examples.
They may differ from the actual displays.
・
In this manual, explanations and screen images for terminal
color "White", "docomo Palette UI" as Home application and
"GREEN-BLUE" as Kisekae are provided.
・
In this manual, "authenticate" indicates the operating
procedure for entering security code or performing
fingerprint authentication depending on functions.
・
Unauthorized copying of parts of or this entire manual is
prohibited.
・
The contents in this manual, URL and contents are subject to
change without prior notice.
Basic package
■F-02
E (including warranty)■Back Cover F
■
Quick start guide (Japanese)
76
■
Desktop Holder F
■
microSD card (2GB)(sample)
(with manual)
* Attached to the terminal at the time of purchase
This terminal supports LTE, W-CDMA, GSM/GPRS, Wireless
LAN System.
・
Because your terminal uses wireless transmission, it may
not function in locations where it is difficult for radio waves
to penetrate, such as tunnels, underground passages and
some buildings, in areas where radio waves are weak, or out
of Xi and FOMA service area. Even when you are high up in
a tall building or condominium and nothing blocks your
view outside, your terminal may not be able to receive or
transmit signals. Also, communication may be interrupted
even when there are strong radio waves with 4 signal status
icons on the terminal and you are not moving (traveling).
・
Because your terminal uses radio waves to communicate, it
is possible that a third party may attempt to tap your calls.
However, the LTE, W-CDMA, GSM/GPRS automatically
applies a confidential communication function to all calls, so
even if a third party could somehow tap a call, they only hear
noise.
・
Your terminal encodes voice communication as digital data.
When you are operating your terminal while moving to a
location subject to weaker radio wave conditions, the
transmitted digital data may not be correctly decoded and as
a result the decoded voice may differ somewhat from the
actual voice.
・
Maintain a separate record of the data (contacts, schedule,
memos, etc.) you saved in the terminal. Note that DOCOMO
assumes no responsibility for any loss of saved contents of
data resulting from malfunction, repair, changing of the
model or other handling of the terminal.
・
In the terminal, as it is for a PC, some applications that you
install may give instability of the operation, or may send
your location information or personal information
registered to the terminal to outside via the Internet and the
information may be used improperly. Please thoroughly
check a provider and operation status of the application etc.
which you want to use beforehand and then use it.
・
You are recommended to save important data to microSD
card or a PC.
・
This terminal supports Xi Area, FOMA Plus-Area and FOMA
HIGH-SPEED Area.
・
The terminal does not support i-mode sites (programs) or
i-αppli.
・
You can use the terminal only with docomo mini UIM card.
If you have a UIM or FOMA card, bring it to a docomo Shop
to replace.
・
Even in Manner mode, shutter sound, auto focus lock sound,
count down sound for self timer, and Find Me Ringtone
sound for Bluetooth Low Energy setting are emitted.
・
You can check your own phone number in the following
step.
From the Application menu, [docomo phonebook]→[My
profile]
・
The terminal automatically performs communication for
some functions, for example, to synchronize data, check the
latest software or maintain connection with the server. If you
transmit a large amount of data such as downloading
applications or watching video, a packet communication
charge becomes high. Subscription of packet flat-rate
service is highly recommended.
・
Depending on the applications or service you use, packet
communication charge may be applied even in Wi-Fi
communication.
4
Contents/Precautions
・
The software on the terminal can be updated with the latest
information.→P182
・
Improving the terminals quality or upgrading operation
system may be included in the software update. And some
applications used in the previous version may not be
available or some unintended bugs may occur after
software update.
・
When the memory of the microSD card or the terminal is
almost full, running application may not operate normally.
In this case, delete saved data.
・
Google applications and service contents are subject to
change without prior notice.
・
For the information on the services provided by Google,
refer to the terms of use for Google Inc. And for the details
on other web services, read terms of use for each service.
・
If your terminal is lost, change your each account password
using a PC to prevent other persons from using Google
services such as Google Talk, Gmail, Google Play, etc. and
Twitter.
・
Set the screen lock to ensure the security of your terminal for
its loss.→P104
・
The terminal supports only sp-mode, mopera U and
Business mopera Internet (VPN setting is limited only to
PPTP). Other providers are not supported.
・
To use tethering, a subscription to sp-mode is required.
・
Packet communication charge when using tethering varies
depending on the charging plan you use. Subscription of
packet flat-rate service is highly recommended.
・
As Mobacas is a service using communications, using the
service incurs packet communication charge. Subscription
of packet flat-rate service is recommended.
・
For details on usage fee, refer to http://
www.nttdocomo.co.jp/english/.
Precautions (Always follow
these directions)
・
Before using your terminal, or when necessary, read the
precautions below to ensure safe use and handling. After
reading this manual, keep it carefully.
・
These precautions are intended to protect you and others
around you. Read and follow them carefully to avoid injury,
damage to the product or damage to property.
・
The signs below differentiate between the levels of danger
that can occur if the product is not used within the specified
guidelines.
This sign denotes that death or
serious injury may directly result
DANGER
WARNING
CAUTION
・
The symbols below show specific directions.
from improper use.
This sign denotes that death or
serious injury may result from
improper use.
This sign denotes that minor
injury or damage to property
may result from improper use.
5
Contents/Precautions
This symbol denotes that the action is
prohibited.
Don’t
This symbol denotes that disassembling the
phone or its components is not allowed.
No disassembl y
This symbol denotes that using the phone or its
components in a bathroom or other highly
No liquids
humid area is not allowed.
This symbol denotes that using the phone or its
components with wet hands is not allowed.
No wet hands
This symbol denote s that an instruction must be
obeyed at all times.
Do
This symbol denotes that the equipment should
be unplugged.
Unplug
■
Precautions contain the description below.
Handling the terminal, battery pack, adapter, desktop holder
and docomo mini UIM card (common)..................................6
Handling the terminal..................................................................8
Material list.................................................................................13
◆
Handling the terminal, battery pack,
adapter, desktop holder and docomo mini
UIM card (common)
DANGER
Do not use, store or leave the terminal in hot
places (e.g. by the fire, near a heater, under a
kotatsu, in direct sunlight, in a car in the hot sun).
Don’t
May cause fire, burns or injuries.
Do not put the terminal into heating cooking
device such as microwave oven or high-pressure
container.
Don’t
May cause fire, burns, injuries, electric shock.
Do not disassemble or remodel the equipment.
May cause fire, burns, injuries, electric shock.
No disassembl y
6
Contents/Precautions
Do not let the terminal get wet with water,
drinking water, urine of pet animals, etc.
May cause fire, burns, injuries, electric shock.
No liquids
For waterproofness, refer to the page.
"Waterproofness/Dustproofness"
Use the battery pack and adapter specified by
NTT DOCOMO for your terminal.
May cause fire, burns, injuries, electric shock.
Do
WARNING
Do not throw the equipment or give a strong
force or hard shock to it.
May cause fire, burns, injuries, electric shock.
Don’t
Keep conductive materials (metal pieces, pencil
lead, etc.) from coming in contact with the
charging terminal, external connection jack, or
Don’t
stereo earphone jack. Do not put those materials
inside the terminal.
May cause fire, burns, injuries, electric shock.
Do not cover or wrap the terminal with a blanket
etc. while using or charging.
May cause fire or burns.
Don’t
Turn the terminal OFF and stop charging before
entering a place such as a gas station where
Do
→
P21
flammable gases are generated.
The gas may catch fire.
When using Osaifu-Keitai in a place as a gas station, turn
OFF the terminal before using it.
(When NFC/Osaifu-Keitai lock is activated, deactivate it
before turning OFF the terminal.)
If the equipment starts giving off a strange smell,
overheats, becomes discolored or deformed
Do
during use, charging or in storage, immediately
perform the following operations.
・
Remove the power plug from the wall outlet or
cigarette lighter socket.
・
Turn the terminal OFF.
・
Remove the battery pack from the terminal.
May cause fire, burns, injuries, electric shock.
CAUTION
Do not leave the equipment on unstable or
sloping surfaces.
The equipment may fall and cause injuries.
Don’t
Do not store the equipment in extremely humid,
dusty or hot areas.
May cause fire, burns, electric shock.
Don’t
Children using the equipment should be
instructed in proper operation by an adult. Do
Do
not allow them to use the equipment without
adult supervision.
May cause inju ries.
7
Contents/Precautions
Store the equipment out of reach of small
children.
May be accidentally swallowed or cause injuries.
Do
Be careful especially when using the terminal
connected to the adapter continuously for a long
Do
time.
If you use applications, call or watch 1Seg while charging
the battery for a long time, the terminal, battery pack and
adapter may be heated.
Directly touching a hot part for a long time, you may have
redness, itching or rash on your skin, or it may result in
low-temperature burns depending on your constitution
and/or health condition.
◆
Handling the terminal
WARNING
Do not direct the infrared data port toward your
eye and transmit signals.
May cause harmful effect on eyes.
Don’t
Do not direct the infrared data port toward home
electric appliances etc. equipped with infrared
device when using infrared communication.
Don’t
May cause an accident because of malfunction of infrared
device.
Do not turn on the light by getting the lighting
part closer to other person's eyes. When
shooting infants, keep at least 1 m away from the
Don’t
object.
May impair eyesight. And may cause accidents like injury
etc., by dazzling or astounding other people.
Do not put foreign objects such as liquid like
water, metal pieces or burnable things into
docomo mini UIM card slot or microSD card slot.
Don’t
May cause fire, burns, injuries, electric shock.
Do not turn on the light aiming directly at the
driver of the car etc.
May disturb driving and cause an accident.
Don’t
Turn the terminal OFF in areas where use is
prohibited, such as in airplanes and hospitals.
May cause electronic equipment or electronic medical
Do
equipment to fail or malfunction.
When using the phone in a medical facility, be sure to
observe the regulations of the facility.
If you do prohibited act such as using the phone in an
airplane, you will be punished according to law.
If usage of the terminal in an aircraft is admitted by setting
airplane mode, etc., use the terminal under the direction of
the airline.
When you talk by setting handsfree or ring alert
is sounding, keep the terminal away from your
Do
ear.
And, when connecting the earphone/
microphone etc. to the terminal and play a game
or music, adjust the volume moderately.
Too loud volume may cause a hearing loss.
And, if you cannot hear the sound around you clearly, it
may cause an accident.
If you have weak heart, be careful when setting
the incoming vibrate alert (vibration) or alert
Do
volume setting.
May cause harmful effect on heart.
8
Contents/Precautions
When you use electronic medical equipment,
check with the equipment manufacturer to
Do
determine how the device is affected by radio
waves before using.
May cause harmful effect on electronic medical equipment
etc.
Turn the terminal OFF near high-precision
electronic control equipment or electronic
Do
equipment using low-power signals.
May cause the equipment to fail or malfunction.
Examples of electronic equipment t o avoid.
*
Hearing aids, implanted pacemakers or d efibrillators, other
electronic medical equipment, fire alar ms, automatic doors and
other automatic control equipment.
Users wearing implanted pacemakers or def ibrillators or other
electronic medical equipment should check with the
manufacturer or sales outlet about the effect of radio freq uencies
on the equipment.
When the display or camera lens is accidentally
broken, be careful of fragments of broken glass
Do
or exposed internal parts of the terminal.
Surface of display is made of hardened glass and camera
lens is made of plastic panel so as not to be shattered,
however, if you mistakenly touch broken or exposed parts,
you may be injured.
CAUTION
Do not swing the terminal by the antenna, strap,
etc.
May cause accident such as injury to yourself or others by
Don’t
hitting.
Do not use the damaged terminal.
May cause fire, burns, injuries, electric shock.
Don’t
When using the motion sensor, check the safety
around you, hold the terminal firmly, and do not
shake it unnecessarily.
Don’t
May cause accident such as injuries.
If the display part is accidentally broken and the
liquid crystal leaks out, do not make the
substance contact with your skin of face or
Don’t
hands.
May cause loss of sight or skin problems.
If the liquid crystal gets into your eyes or mouth, rinse it
with clean water and see a doctor immediately.
And, if the liquid adheres to skin or clothing, use alcohol
etc. to wipe it off, then wash with soap.
To use the terminal in car, check with automobile
manufacturer or dealer to determine how the
Do
device is affected by radio waves before using.
In rare cases, using the phone in some vehicle models can
cause the vehicle's electronic equipment to malfunction. In
that case, stop using the terminal immediately.
The use of the terminal may cause itching,
rashes, eczema, or other symptoms depending
Do
on the user's physical condition. If you develop
skin problems, stop using the phone
immediately, and see a doctor.
For material of each part →P13 "Material list"
When watching the display, take a certain
distance from the display in a fully bright place.
May reduce visual ac uity.
Do
9
Contents/Precautions
◆
Handling battery pack
■
Check that the battery type matches the type
displayed on the battery pack label.
DisplayBattery type
Li-ion 00Li-ion battery
DANGER
Do not connect a wire or other metal objects to
the jack. And, do not carry or store the terminal
with objects like a metal necklace.
Don’t
May cause battery pack to ignite, burst, heat or leak.
Check the orientation of the battery pack to
attach to the terminal, and do not try to force the
battery pack onto the terminal if you are having
Don’t
trouble attaching it.
May cause battery pack to ignite, burst, heat or leak.
Do not throw the battery pack into the fire.
May cause battery pack to ignite, burst, heat or leak.
Don’t
Do not nail the battery pack, hit with a hammer
or step on it.
May cause battery pack to ignite, burst, heat or leak.
Don’t
If the battery pack's fluid etc. contacts eyes,
immediately flush the eyes with clean water and
Do
see a doctor right away. Do not rub the eyes.
May cause loss of sight.
WARNING
If the battery pack seems to have abnormalities
such as deformation or scratches due to falling,
never use it.
Don’t
May cause battery pack to ignite, burst, heat or leak.
If the battery pack leaks or gives off a strange
smell, immediately remove it from the vicinity of
Do
open flames.
The vapors from leaking battery pack fluid may ignite or
explode.
Be careful not to let your pet bite the battery
pack.
May cause battery pack to ignite, burst, heat or leak.
Do
CAUTION
Do not discard old battery packs together with
other garbage.
May cause igniting or environmental destruction. Tape the
Don’t
terminals of old battery packs to insulate them, and then
bring them into a sales outlet such as docomo Shop. If
your local municipality has a battery recycling program,
dispose of them as provided for.
Do not use or charge a wet battery pack.
May cause battery pack to ignite, burst, heat or leak.
Don’t
10
Contents/Precautions
If fluid etc. leaks out from the battery pack, do
not make the fluid contact with your skin of face
Do
or hands.
May cause loss of sight or skin problems.
If the fluid etc. put into your eyes or mouth, or contacts
skin or clothes, immediately flush the contacted area with
clean water.
If the fluid etc. put into the eyes or mouth, immediately see
a doctor after flushing.
◆
Handling adapter and desktop holder
WARNING
Do not use the adapter cord if it gets damaged.
May cause fire, burns, electric shock.
Don’t
Do not use the AC adapter or desktop holder in a
bathroom or other highly humid area.
May cause fire, burns, electric shock.
Don’t
Always use the DC adapter with a negativeground vehicle. Do not plug it into a positiveground vehicle.
Don’t
May cause fire, burns, electric shock.
When it starts to thunder, do not touch adapter.
May cause electric shock.
Don’t
Do not short the charging terminal while it is
connected to the outlet or cigarette lighter
socket. Do not touch the charging terminal with
Don’t
a part of your body such as your hand or finger.
May cause fire, burns, electric shock.
Don’t
Don’t
No wet hands
Do
Do
Do
Do
11
Do not place heavy objects on the adapter cord.
May cause fire, burns, electric shock.
When you insert and remove the AC adapter
from power outlet, do not contact a metal strap
or other metal objects with the jack.
May cause fire, burns, electric shock.
Do not touch the adapter cord, desktop holder or
outlet with wet hands.
May cause fire, burns, electric shock.
Only use with the specified power source and
voltage. When charging the terminal overseas,
use AC adapter for global use.
If incorrect voltage is used, this may cause fire, burns or
electric shock.
AC adapter : 100V AC
DC adapter : 12V or 24V DC (spe cific for negative ground
vehicle)
AC adapter for global use : Between 100V and 240V AC
(Connect to the AC outlet for internal household use)
If the DC adapter's fuse blows, replace it only
with the specified fuse.
May cause fire, burns, electric shock. For the specified
fuse, see the instructions that come with the DC adapter.
Wipe off any dust that accumulates on the power
plug.
May cause fire, burns, electric shock.
When you connect the AC adapter to an outlet,
firmly connect to the outlet.
May cause fire, burns, electric shock.
Contents/Precautions
When you disconnect the power plug from the
outlet or cigarette lighter socket, do not pull the
Do
adapter cord with excessive force. Instead, hold
the adapter to disconnect.
May cause fire, burns, electric shock.
Always remove the power plug from the outlet
or cigarette lighter when not using the adapter
Unplug
for an extended period.
May cause fire, burns, electric shock.
Immediately remove the power plug from the
outlet or cigarette lighter socket if water or other
Unplug
fluids get into the adapter.
May cause fire, burns, electric shock.
Always remove the power plug from the
cigarette lighter socket when cleaning the
Unplug
equipment.
May cause fire, burns, electric shock.
◆
Handling docomo mini UIM card
CAUTION
Be careful of the cut surface when removing
docomo mini UIM card.
May cause injuries.
Do
◆
Handling mobile phones near electronic
medical equipment
■
These precautions are based on the guidelines
produced at the Electromagnetic Compatibility
Conference Japan, regarding the protection of
electronic medical equipment from radio waves
emitted by mobile phone units.
WARNING
Obey the following rules inside medical facilities.
・
Do not bring the terminal into operating rooms (ORs),
intensive care units (ICUs) or coronary care units
Do
(CCUs).
・
Turn the terminal OFF in hospital wards.
・
Turn the terminal OFF in hospital lobbies and corridors
if electronic medical equipment could be nearby.
・
If the medical facility has specified zones where use or
possession of mobile devices is prohibited, obey those
instructions.
Turn the terminal OFF in crowded trains or other
public places where pacemaker or defibrillator
Do
wearers could be nearby.
The terminal's signals may affect the operation of
implanted pacemakers or defibrillators, and other devices.
Wearers of medical equipment such as
implanted pacemakers or defibrillators must
Do
carry and use the terminal at least 22 cm away
from the implanted device.
The terminal's signals may affect the performance of
electronic medical equipment.
12
Contents/Precautions
When electronic medical equipment other than
implanted pacemakers or defibrillators are in use
Do
outside of medical facilities (such as in home care
settings), check with the device manufacturer to
determine how the device is affected by
electrical signals.
The terminal's signals may affect the performance of
electronic medical equipment.
◆
Material list
PartMaterial/Surface treatment
Display panelHardened glass/AF coating
Exterior case Display side PA resin/Acrylic UV curable
Battery
attaching
side,
Peripheral
parts, Back
cover
coating
PC resin/Acrylic UV curable
coating
PartMaterial/Surface treatment
TV/FM
transmitter
antenna
Strap pinStainless steel/Nickel plating
Receiver panel,
Out-camera panel
Light lensPC resin
Power key, Volume keyPC resin/Acrylic UV curable
External connection jack
cap
Stereo earphone jackPA resin
Fingerprint
sensor
Top section PC resin/Acrylic UV curable
Pipe section Stainless steel
Root flexure
section,
Root
rotating
section
(top)
Root
rotating
section
(bottom)
SensorEpoxy resin
Outer
periphery
coating
Stainless steel/Nickel plating
Zinc/Nickel plating
Acrylic resin/UV hard coating
coating
PC resin+Polyester elastomer
resin/Acrylic UV curable coating
F-02E is waterproof/dustproof, however, do not allow
water or dust to seep into the terminal and do not allow
accessories or optional devices to get wet or attached with
dust.
- Battery pack, adapter, desktop holder, docomo mini UIM
card are not waterproof/dustproof. Do not use in a
bathroom or other highly humid area or do not let rain
touch. Or putting the terminal on your body, humidity of
sweat may cause internal corrosion and malfunction. Note
that malfunctions, which are determined to be caused by
water as result of inspections, are not covered by the
warranty. Since these conditions are outside the scope of
the warranty, a repair, if at all possible, is charged.
・
Clean the terminal with a dry soft cloth (such as a cloth for
eyeglasses).
- Rubbing it roughly with a dry cloth may scratch the
display.
- Drops of water or dirt left on the display may cause stains.
- If the terminal is wiped with alcohol, paint thinner, benzine
or detergent, the printing may disappear or color may
fade.
・
Clean the jack occasionally with a dry cotton swab etc.
- If the jack is soiled, connection gets worse and it may
cause power to be turned off or insufficient battery charge,
so clean the jack with a dry cotton swab etc.
Also, be careful never to damage the jack when cleaning it.
14
Contents/Precautions
・
Do not place the terminal near an air-conditioner outlet.
- The rapid change in temperature may cause condensation,
causing internal corrosion and malfunction.
・
When using, be careful not to subject excessive force to the
terminal or the battery.
- If the terminal is crammed into a brimming bag or placed
in a pocket and sat on, display, internal PCBs or battery
pack may be damaged or malfunction. And, if external
devices are plugged into the external connection jack or
the stereo earphone jack, the breakage of the connector or
malfunction may result.
・
Do not rub or scrape the display with a metal piece etc.
- May scratch the display, causing malfunction or damage.
・
Carefully read the separate instructions that come with
optional devices.
◆
The terminal
・
Do not press the surface of the touch panel strongly or
operate it with sharp objects such as a nail, a ballpoint pen
and a pin.
- It may damage the touch panel.
・
Avoid extreme temperature.
- Use the terminal where the temperature ranges between 5
and 40℃ (limited to the temporary use in a bathroom etc.
when temperature is above 36℃) and humidity ranges
between 45 and 85%.
・
The terminal may affect land-line phones, TVs or radios in
use nearby, so use it as far as possible from these
appliances.
・
Maintain a separate record of the data you saved in the
terminal.
- If the data is deleted, DOCOMO assumes no responsibility
for the loss of any data.
・
Do not drop the terminal or subject it to shocks.
- May cause malfunction or damage.
・
Do not plug external devices into the external connection
jack or stereo earphone jack at a slant, or do not pull it
forcibly while it is plugged.
- May cause malfunction or damage.
・
It is normal for the terminal to become warm during use or
charging. Continue to use it.
・
Do not leave the terminal with the camera in areas under
strong direct sunlight.
- May cause discoloring or burn-in of elements.
・
Use the terminal with the external connection jack cap
closed.
- Dust and/or water brought into the terminal cause
troubles.
・
Do not use the terminal with the back cover removed.
- May cause removal of battery pack, malfunction or
damage.
・
Do not give a strong impact on the fingerprint sensor or
scratch the surface.
- It may cause not only malfunction of the fingerprint sensor
but also disabling authentication.
・
Clean the fingerprint sensor with a dry soft cloth (such as a
cloth for eyeglasses).
- When the fingerprint sensor is dirty or gets wet on the
surface, it cannot read the fingerprint and may cause
decrease the authentication performance or erroneous
operation.
15
Contents/Precautions
・
While microSD card is being used, do not take the card out
or do not turn off the terminal.
- May cause data loss or malfunction.
・
Do not bring magnetic cards etc. close to the terminal.
- Magnetic data in cash cards, credit cards, telephone cards,
floppy disks, etc. may be erased.
・
Do not bring magnetized objects close to the terminal.
- Bringing strong magnetism close may cause a
malfunction.
◆
Battery pack
・
The battery pack is a consumable part.
- Replace the battery pack if the terminal has extremely
short operation time on a full charge, though it may vary
by operating conditions. Purchase a new battery pack of
the specified type.
・
Charge the battery in an area within the proper ambient
temperature range (5-35℃).
・
The operation time provided by the battery pack varies by
the operating environment and battery pack's
deterioration.
・
The battery pack may swell out as it comes to near the end
of its lifetime depending on the usage conditions, but it is
not a problem.
・
Be careful especially about the following points when
preserving the battery pack.
- Keeping under the state of the full charge (right after
charging ends)
- Keeping under the state of the empty charge (too
exhausted to turn on the terminal)
They may cause the battery pack performance to be
degraded or its lifetime to be shortened.
A recommended battery level to keep the battery pack is
approximately 40% of remaining battery level as a guide.
◆
Adapter
・
Charge the battery in an area within the proper ambient
temperature range (5-35℃).
・
Do not charge the battery in the areas below.
- In areas of excessive humidity, dust or vibrations
- Near land-line phones or TVs/radios
・
It is normal for the adapter to become hot while charging.
Continue to use it.
・
When using the DC adapter for charging, keep the vehicle
engine running.
- The vehicle's battery could become flat.
・
When using an outlet with a mechanism preventing
unplugging, follow the handling instructions for that outlet.
・
Do not give strong shock. Do not deform the charging
terminal.
- May cause malfunction.
16
Contents/Precautions
◆
docomo mini UIM card
・
Do not use excessive force to install/remove docomo mini
UIM card.
・
Note that DOCOMO assumes no responsibility for
malfunctions occurring as the result of inserting and using
docomo mini UIM card with another IC card reader/writer.
・
Always keep UIM ICs clean.
・
Clean docomo mini UIM card with a soft, dry cloth (such as
a cloth for eyeglasses).
・
Maintain a separate record of the data you saved in docomo
mini UIM card.
- If the data is deleted, DOCOMO assumes no responsibility
for the loss of any data.
・
To preserve the environment, bring the old docomo mini
UIM card to a sales outlet such as docomo Shop.
・
Take care not to scratch, touch accidentally or short IC.
- May cause data loss or malfunction.
・
Do not drop docomo mini UIM card or subject it to shocks.
- May cause malfunction.
・
Do not bend docomo mini UIM card or place heavy objects
on it.
- May cause malfunction.
・
Do not install docomo mini UIM card into the terminal with
a label or sticker put on.
- May cause malfunction.
◆
Bluetooth devices
・
This terminal is equipped with the security features, that
are compliant with Bluetooth standards for communication
via Bluetooth. However, depending on the settings, there
may not be enough security. Be aware of security risks
when using Bluetooth.
・
DOCOMO assumes no responsibility for any information
which may be leaked during communication via Bluetooth.
・
Frequency bands
Frequency bands used by the terminal Bluetooth function
are as below.
abdc
2.4FH/XX1
a
2.4 : Radio equipment that uses the 2400 MHz band.
b
FH/XX : The modulation is the FH-SS method or other
method (method other than DS-SS method/DS-FH
method/FH-OFDM composite method/OFDM method).
c
1 : The expected interference distance is 10 m or shorter.
d
2483.5 MHz are used, and the bandwidth used by mobile
object identification devices cannot be avoided.
Available channel varies by countries.
Use of Bluetooth is limited in some countries. Confirm
regulations of the country/region to use it.
To use in airplane, confirm with airline company in advance.
: All bandwidths between 2400 MHz and
17
Contents/Precautions
Cautions on using Bluetooth devices
In the bandwidth used by this terminal, in addition to
home electric appliances such as a microwave oven and
industrial/scientific/medical devices, in-plant radio
stations used to identify mobile objects used in
production lines of a factory that require a license,
specified low power radio stations, or amateur radio
stations that do not require a license (hereafter "other
radio stations") can be in operation.
1. Before using the terminal, check whether other radio
stations are in operation in your neighborhood.
2. If radio wave interference occurs between the terminal
and "other radio stations", use the terminal in a
different location or "Turn the power OFF" to avoid the
radio wave interference.
3. For details, contact "General Inquiries" on the last page
of this manual.
◆
Wireless LAN (WLAN)
・
Wireless LAN (WLAN) exchanges information using radio
waves, and allows you to freely establish LAN connection if
you are within an area where radio wave reaches. On the
other side, if you communicate without appropriate
security settings, communications may be intercepted or
hacked by malicious parties. It is recommended to make
necessary security settings on your judgement and
responsibility.
・
Wireless LAN
Do not use wireless LAN in a place where magnetized by
electric products, AV, OA equipment, etc. or where
electromagnetic wave is generated.
- If magnetism or electrostatic noise affects the terminal,
noise may be increased or communication may not be
available (especially when using microwave oven, it may
affect the terminal).
- Using near TV or radio may cause poor reception or TV
screen may be blurred.
- When multiple wireless LAN access points exist near the
terminal and they use the same channel, search may not
be performed correctly.
・
Frequency bands
Frequency bands for WLAN devices are written on battery
pack insert section of the terminal. Label description are as
follows.
a bc
d
2.4DS/OF4
e
18
Contents/Precautions
a
2.4 : Radio equipment that uses the 2400 MHz band.
b
DS : The modulation is the DS-SS method.
c
OF : The modulation is the OFDM method.
d
4 : The expected interference distance is 40 m or shorter.
e
2483.5 MHz are used, and the bandwidth used by mobile
object identification devices can be avoided.
Using wireless LAN built-into the terminal in 5.2/5.3 GHz
outside is prohibited by the Radio Law.
Available channel varies by countries. To use WLAN
overseas, check the conditions such as available frequency,
regulation, etc. for the country.
To use in airplane, confirm with airline company in advance.
Cautions on using 2.4 GHz devices
In the frequency band used by WLAN devices, in addition
to home electric appliances such as a microwave oven
and industrial/scientific/medical devices, in-plant radio
stations for identification of mobile objects used in
production lines of a factory (a license is required),
specified low power radio stations (a license is not
required), or amateur radio stations (a license is required)
can be in operation.
1. Before using this device, confirm that in-plant radio
stations for identification of mobile objects, specified
low power radio stations or amateur radio stations are
not in operation in your neighborhood.
: All bandwidths between 2400 MHz and
2. If this device generates harmful radio wave
interference against in-plant radio stations for
identification of mobile objects, change the using
frequency promptly or stop using wireless LAN
function, and contact "General Inquiries" on the last
page of this manual, then consult about treatment for
prevention of the interference (for example, installation
of partitions etc.).
3. If this device generates harmful radio wave
interference against in-plant radio stations for
identification of mobile objects or amateur radio
stations, or if any trouble, contact "General Inquiries"
on the last page of this manual.
Cautions on using 5 GHz devices
Channel numbers and frequency bands available in Japan
are as follows.
5.2 GHz band
Channel number (Ch)Frequency bands (MHz)
365,180
405,200
445,220
485,240
5.3 GHz band
Channel number (Ch)Frequency bands (MHz)
525,260
565,280
605,300
645,320
19
Contents/Precautions
5.6 GHz band
Channel number (Ch)Frequency bands (MHz)
1005,500
1045,520
1085,540
1125,560
1165,580
1205,600
1245,620
1285,640
1325,660
1365,680
1405,700
◆
FeliCa reader/writer
・
FeliCa reader/writer function of the terminal uses weak
waves requiring no licenses for radio stations.
・
It uses 13.56 MHz frequency band. When using other
reader/writers in your surroundings, keep the terminal
away sufficiently from them. Before using the FeliCa
reader/writer, confirm that there are no radio stations using
the same frequency band nearby.
◆
FM transmitter
・
FM transmitter function of the terminal uses weak waves
requiring no licenses for radio stations.
・
It uses 78.4 - 89.6MHz frequency band. To use it, set
frequency not to common to FM radio station of the area
you use so as to avoid affecting FM radio users in
neighborhood.
◆
CAUTION
・
Do not use a remodeled terminal. Using a remodeled
terminal violates the Radio Law.
The terminal is certified according to technical standard
conformance of specified wireless equipment based on the
Radio Law, and as a proof of it, the "Technical Compliance
Mark " is depicted on the engraved sticker of the terminal.
If you remodel the terminal by removing its screws, your
certification of technical standard conformance becomes
invalid.
Do not use the terminal with its certification of technical
standard conformance invalid as it violates the Radio Law.
・
Be careful when you use the terminal while driving a car etc.
Using a mobile phone while driving is subject to penal
regulations.
However, absolutely necessary cases such as rescue of a
sick person or maintaining public's safety are exempted.
・
Use FeliCa reader/writer function only in Japan.
FeliCa reader/writer function of the terminal conforms to
Japanese radio standards.
If you use this function overseas, you may be punished.
・
Use the FM transmitter only in Japan.
The FM transmitter of the terminal is compliant with
wireless standards and is authorized for use only in Japan.
If you use this function overseas, you may be punished.
・
Do not alter the basic software.
Repairs may be refused as a modification of software.
20
Contents/Precautions
Waterproofness/Dustproofness
F-02E provides waterproofness of IPX5*1, IPX8*2 and
dustproofness of IP5X*3 with firmly closing the external
connection jack and steadily installing the back cover.
*1
IPX5 means that a phone keeps functioning after applying a jet
flow of 12.5 L/min. from every direction from a distance of
approximately 3 m for at least 3 minutes using water nozzle in 6.3
mm inner diameter.
*2
For F-02E, IPX8 means that a phone keeps functioning after F-02E
is slowly submerged to depth of 1.5 m in static tap water at room
temperature, left there for 30 minutes and then taken out. (Camera
function cannot be used under water.)
*3
IP5X means a protection degree that a phone keeps functioning
and safety after it is placed in a device with dust in diameter
75μm or less for 8 hours, agitated and then taken out.
❖
What you can do with waterproofness of
F-02E
・
You can talk and watch 1Seg without an umbrella in the
rain (for rainfall of 20 mm or less per hour).
- When your hands or the terminal are wet, avoid installing/
removing the back cover or opening/closing the external
connection jack cap.
・
The terminal can be submerged into a pool which has a
depth of 1.5 m.
- Do not operate under water.
- If you put the terminal in water of swimming pool, be sure
to have it within 30 minutes.
- If the terminal gets wet with water from the swimming
pool, wash it in following procedure (→P24).
・
You can use the terminal in a bathroom.
- Do not immerse the terminal into a bathtub. Also, do not
use the terminal in hot water. May cause malfunction. If
you should fall the terminal into the bathtub, immediately
pick it up to drain water in specified procedure (
- Never put the terminal in hot spring water or water
containing soap, detergent or bath powder.
In case the terminal gets wet with water other than tap
water, wash it in specified procedure (
- You can use the terminal within 2 hours in a bathroom
where the temperature ranges between 5 and 45℃ and
humidity ranges between 45 and 99%.
- Rapid temperature change may cause condensation. If you
bring the terminal from a cold place to warm place such as
a bathroom, wait until the terminal reaches the room
temperature.
- Do not put water, hot water, etc. from a faucet or shower.
21
→
P24).
Contents/Precautions
→
P24).
◆
To ensure waterproofness/dustproofness
To avoid water/dust ingress, be sure to observe the following
points.
・
Do not throw any liquid other than room-temperature tap
water on the terminal, or soak it in such liquid.
・
When using the external connection jack, pull the cap up
with your fingertip by the groove as shown in the
illustration.
After using the external connection jack, close the cap in the
direction shown, and make sure that the cap is completely
closed without slack by pushing the tab in.
・
For installing the back cover, see the description in "■
Attaching" of "Attaching/Removing battery pack".→P30
・
Steadily attach the back cover without any space between
and firmly close the external connection jack. Even a fine
obstacle (one hair, one grain of sand, tiny fiber, etc.) put
between contact surfaces may allow water to enter.
Groove
・
Do not poke the stereo earphone jack, microphone,
earpiece, speaker, or temperature/humidity sensor with a
sharp object.
・
Do not let the terminal fall. It may become scratched causing
the waterproof/dustproof performance to degrade.
・
The external connection jack cap and the rubber gasket of
the rear side of the back cover play important roles for
keeping waterproof/dustproof performance. Do not deform
the back cover by twisting etc. or peel off or damage the
rubber gasket. Also, prevent dust from adhering to it.
To keep the terminal waterproofness/dustproofness,
replacement of parts is required every 2 years regardless
of whether the terminal appears normal or abnormal.
DOCOMO takes the terminal to replace the parts as a
chargeable service. Bring the terminal to a sales outlet
such as a DOCOMO-specified repair office.
22
Contents/Precautions
◆
Important precautions
Do not perform actions shown in the illustrations below.
<Example>
Using Soap/
Detergent/Bath powder
Applying strong
Observe the following precautions to use the terminal
properly.
・
Accessories and optional devices are not waterproof/
dustproof. When watching 1Seg, etc. with the terminal
installed in the included desktop holder, do not use it in a
bathroom, shower room, kitchen or lavatory even if it is not
connected to the AC adapter.
・
Do not apply water flow stronger than allowed (→P21) (e.g.,
such water flow that gives you pain when applied to your
skin directly from a faucet or shower). F-02E provides IPX5
waterproof performances. However, it causes malfunction.
・
If the terminal gets wet with salt water, sea water, refreshing
beverage, etc. or mud or soil adhered, wash it immediately.
If they dry out, it is hard to remove the dirt and it may cause
damage or malfunction.
・
Do not put the terminal in hot water, use it in a sauna or
apply hot airflow (from a hair dryer etc.) to it.
water flow
Washing with
brush/sponge
Soaking in
ocean water
Machine-washing
Using in
hot spring
・
Do not move the terminal in water or slam the terminal
against the surface of water.
・
If you put the terminal in tap water or in water of swimming
pool, be sure to have it within 30 minutes.
・
When you use the terminal in swimming pool, obey rules of
the facility.
・
The terminal does not float on water.
・
Do not leave water on the terminal. May short-circuit the
power jacks, or in a cold region, water may freeze causing
malfunction.
・
Do not leave water on the stereo earphone jack,
microphone, earpiece or speaker. Such water may interfere
with talking.
・
Do not leave water drop attached around the temperature/
humidity sensor. May cause incorrect measurement of
temperature/humidity.
・
If the back cover is damaged, replace it. Water may enter
inside from a damaged section causing troubles such as
electric shocks or corrosion of the battery.
・
If the terminal gets wet with water or other liquids with the
external connection jack cap or the back cover open, the
liquid may get inside the terminal causing electric shocks or
malfunction. Stop using the terminal, turn the power OFF,
remove the battery pack and contact a DOCOMO-specified
repair office.
・
If the external connection jack cap, or the rubber gasket on
the rear side of the back cover is damaged or deformed,
replace it at DOCOMO-specified repair office.
23
Contents/Precautions
DOCOMO does not guarantee actual operations under all
states. Malfunctions deemed to be caused by
inappropriate operation by the customer are not covered
by the warranty.
◆
Washing the terminal
With pressing and holding the external connection jack cap
not to open, wash the terminal in tap water without rubbing
hard.
Press here
・
Do not apply water flow stronger than allowed (→P21) (e.g.,
such water flow that gives you pain when applied to your
skin directly from a faucet or shower).
・
With the back cover steadily attached and pressing and
holding the external connection jack cap not to open, wash
the terminal in tap water without rubbing hard.
・
Do not use brush, sponge, soap, detergent, etc.
・
If mud or soil is adhered to the terminal, do not operate the
terminal. Eliminate the dirt first by shaking several times in
tap water of wash-basin and then wash the terminal with
running water.
・
After washing, wipe the surface with dry cloth well, drain
water by the following procedure and let the terminal dry
naturally.
◆
Draining water from the terminal
When the terminal is wet, water may flow out after wiping it
off; drain the water in the following steps.
a
Hold the terminal firmly and wipe off moisture on the
terminal surface and back side with dry, clean cloth etc.
24
Contents/Precautions
b
Shake the terminal approximately 20 times, firmly holding
it, until there is no more water splattering.
c
Swing the terminal about 10 times against a dry, clean
cloth etc. to wipe off water remaining in the stereo
earphone jack, microphone, earpiece, speaker, keypad, TV/
FM transmitter antenna or charging terminal, etc.
d
Wipe off water drained from the terminal with dry, clean
cloth etc., and dry naturally.
・
Water, if any, remaining in the terminal may ooze up after
wiping off.
・
Do not wipe off water remaining in gaps directly with a
cotton swab etc.
◆
Charging
Check the following before and after charging.
・
Check if the terminal is not wet. Never try to charge the
battery pack when the terminal is wet.
・
Accessories and optional devices are not waterproof/
dustproof.
・
When charging the battery when or after the terminal is wet,
adequately drain it and wipe off water with a dry, clean cloth
etc., before connecting the accessory desktop holder or
opening the external connection jack cap.
・
When you open the external connection jack cap for
charging, close the cap firmly after charging. It is
recommended to use the desktop holder for charging to
prevent water or dust from seeping inside from the external
connection jack.
・
Do not use the AC adapter or desktop holder in a bathroom,
shower room, kitchen, lavatory or other highly humid area.
May cause fire or electric shock.
・
Do not touch the AC adapter or desktop holder with wet
hands. May cause electric shock.
25
Contents/Precautions
Before using the terminal
Part names and functions
e f gh
k
l
c
o p qnm
j
r
s
t u
a
b
d
i
j
<Functions>
a
External connection jack (MHL available)
Connect to earphone adapter cable with antenna (sample)
*
To connect HDMI cable (commercially available), HDMI
conversion cable L01 (optional) or HDMI conversion cable SC01
(optional) is needed.
b
Stereo earphone jack (waterproof)
*
If you insert the plug of the stereo earphones, the earphone
connecting MIC selection screen appears.→P95
c
TV/FM transmitter antenna
*
Extend when watching 1Seg/Mobacas/using FM transmitter.
d
Proximity sensor
Prevents the erroneous operation of the touch panel during
a call.
*
Putting a protective sheet or seal on the proximity sensor may
a
b
v
cause erroneous operation.
e
Indicator LED
*
Color of light or flash may be different depending on settings or
application.
f
Earpiece
g
RGB sensor
Sense ambient light and brightness and automatically
adjusts the display backlight.
*
If you cover the sensor, detection may not be done correctly.
h
In-camera
i
Display (Touch panel)
26
Before using the terminal
j
Xi/FOMA antenna
*
The antenna is built-in the terminal. Covering around the antenna
by the hand may affect the quality.
*
When the back cover is removed, you can see a sticker on the
antenna part on the side of the volume key, which ensures
waterproofness and performance of the antenna. Do not scratch or
remove the sticker.
k
Microphone
*
Do not cover when using.
l
Temperature/Humidity sensor
*
If you cover the sensor, detection may not be done correctly.
m
mark
Installation of IC card
*
You can use Osaifu-Keitai by holding mark over the card
reader and communicate by holding over a NFC-module-mounted
device, etc.
n
Infrared data port
o
Out-camera
p
GPS/Bluetooth/Wi-Fi antenna
*
The antenna is built-in the terminal. Covering around the antenna
by the hand may affect the quality.
q
Camera light (Flash)
r
Fingerprint sensor
Slide with finger : Fingerprint authentication, unlock the
lock screen
Press : Activate/Deactivate sleep mode
s
Back cover
*
To access docomo mini UIM card slot and the microSD card slot,
remove the back cover and the battery pack.
*
Rubber gasket is attached on the rear side of the back cover to
resist water/dust.
t
Speaker
u
Charging terminal
v
Strap hole
Remove the back cover to attach a strap easily. After a strap
is attached, firmly attach the back cover. To ensure
waterproofness/dustproofness, make sure that the strap is
not caught between the back cover and terminal.
*
For "Attaching/Removing back cover"→P30
<Key functions>
a
Volume key
Press : Adjust the volume of each function
Press and hold D for 1 second or more : Activate/Deactivate
Manner mode
b
Power key
Press : Activate/Deactivate sleep mode
Press and hold : Turn power ON/OFF, restart, Public mode,
Airplane mode, activate/deactivate Manner mode
27
SD
X
Before using the terminal
docomo mini UIM card
The docomo mini UIM card is an IC card in which user
information such as your phone number etc. is saved.
・
You can use the terminal only with docomo mini UIM card.
If you have a UIM or FOMA card, bring it to a docomo Shop
to replace.
・
When docomo mini UIM card is not inserted to the terminal,
some functions are not available.
・
For details on docomo mini UIM card, refer to the docomo
mini UIM card manual.
◆
Installing/Removing docomo mini UIM
card
・
Turn the terminal OFF, remove the back cover and the
battery pack before installing/removing.→P30
■
Installing
a
Put your fingertip on the tab and pull the tray straight out
b
Put docomo mini UIM card into the tray with the IC side
facing down, then insert it all the way
・
Check the orientation of docomo mini UIM card corner
cut.
Corner cut
Ta b
IC
Tray
■
Removing
a
Put your fingertip on the tab, pull the tray straight out, and
remove docomo mini UIM card
✔
INFORMATION
・
When handling docomo mini UIM card, take care not to touch
or scratch the IC part. Note that inserting docomo mini UIM
card forcibly into the terminal may damage docomo mini
UIM card.
・
The tray is structured not to be removed. When pulling the
tray out, stop pulling out at the pullout limit. Do not pull out
with excessive force. Doing so may damage or destroy the
tray.
28
Before using the terminal
Loading...
+ 178 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.