Docomo DM-01J Instruction Manual

’17.1

INSTRUCTION MANUAL

Introduction

Thank you for purchasing “DM-01J”. Be sure to read this manual before and during use to ensure proper operation.

Optional parts (sold separately) compatible with the handset can

also be checked and purchased on docomo online shop.

(https://www.mydocomo.com/onlineshop/options/index.html)

(in Japanese only)

Checking operation method

Quick Start Guide (Basic package) (in Japanese only)

This guide describes part names and functions.

User's Manual (App of the handset) (in Japanese only)

This manual describes detailed guidance and operations of functions. In the home screen, display the Apps Sheet

/select

“Tool” folder

/[Instruction Manual]

User's Manual (in PDF format)

This manual describes detailed guidance and operations of functions. Download from the DOCOMO website

(https://www.nttdocomo.co.jp/english/support/

trouble/manual/download/dm01j/index.html

)

※ The latest information can be downloaded. The URL

and contents are subject to change without prior notice.

The screens and illustrations in this manual are shown as

examples. The actual screens and illustrations may differ.

The explanations in this manual are based on the case when

the home app is Feel Home. If you change the home app, operation procedures etc. may be different from the explanations of this manual.

The explanations in this manual are based on the case when

the wallpaper is [ーュ  壁紙] (Disney splash of magic Live wallpaper). Because the image is switched every time the home screen is displayed, the screen may be different from the explanations of this manual.

Note that “DM-01J” is referred to as “handset” in this manual. This manual refers to microSD Card, microSDHC Card or

microSDXC Card as “microSD Card” or “microSD”.

Reproduction of this manual in part or in whole without prior

permission is prohibited.

The contents of this manual are subject to change without

prior notice.

Basic package

DM-01J (includes warranty)

Disney original cover SH01

Quick Start Guide (in Japanese only)

Notes on usage (in Japanese only)

Welcome Card

Contents/Precautions

Using the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Precautions (ALWAYS FOLLOW THESE DIRECTIONS). . . .4

Handling precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Waterproof/Dustproof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Before Using the Handset

Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . .15

docomo nano UIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Turning power on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Disney original cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Character entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Changing screen display to English . . . . . . . . . . . . . . . . . . .25

Initial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Incoming/Charging illumination . . . . . . . . . . . . . . . . . . . . . . .28

Screen display/Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Home screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Recent Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Home applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Confirmation screen at first activation of apps. . . . . . . . . . . .35

docomo LIVE UX

Home screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

App list screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Installing recommended apps . . . . . . . . . . . . . . . . . . . . . . . .38

Backing up/Restoring the home screen. . . . . . . . . . . . . . . . .38

Displaying all apps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

My magazine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Information on apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Call

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Operation during a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Outgoing/Incoming call history . . . . . . . . . . . . . . . . . . . . . . .42

Voice/Answering memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Call settings/Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Mail/Web Browser

docomo mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

SMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Gmail

™

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Early Warning “Area Mail” . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Apps

dmenu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

dmarket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Disney Market. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Play Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Osaifu-Keitai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

SHCamera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Album . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Media Player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

GPS/Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

KARADA MATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Convenient tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

docomo Data Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Handset Settings

Setting menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Sound & notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Useful . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

EMOPA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Battery & energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Storage & USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Data usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

More . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

docomo service/cloud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Lock & security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Language & input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Backup & reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Google

™

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Date & time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

About phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

File Management

Storage structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Contents Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Data Communication

Bluetooth® function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

NFC communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Contents/Precautions

External Device Connection

PC connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Printing/Saving by print service . . . . . . . . . . . . . . . . . . . . . . .86

USB host function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Wireless output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

VPN (Virtual Private Network) . . . . . . . . . . . . . . . . . . . . . . . .87

International Roaming

Outline of international roaming (WORLD WING). . . . . . . . .88

Available services overseas . . . . . . . . . . . . . . . . . . . . . . . . .88

Before use overseas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Settings for use overseas . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Making/Receiving a call in your country of stay . . . . . . 89

Setting international roaming . . . . . . . . . . . . . . . . . . . . 89

Checking after homecoming . . . . . . . . . . . . . . . . . . . . 90

Appendix/Index

Troubleshooting (FAQ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

Anshin Enkaku Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Warranty and After-Sales Service . . . . . . . . . . . . . . . . . . . . .94

Software update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

Main specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Specific Absorption Rate (SAR) of Mobile Phones . . . . . . . .97

Export Administration Regulations . . . . . . . . . . . . . . . . . . . .99

Intellectual Property Right . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Unlocking SIM lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

Contents/Precautions

The handset supports LTE, W-CDMA, GSM/GPRS and wireless

LAN systems.

Because the handset relies on radio signals, it cannot be used in

a place with no signal (such as tunnels, underground or in buildings), in places with a weak signal or outside the LTE service area or FOMA service area. You may not use the handset in the upper floors of a building even with no obstructions in sight. There may also be times when the signal is strong and you are not moving but the call is interrupted.

Because the handset uses radio waves, it is possible for a third

party to listen in on a conversation. However, since the LTE, W-CDMA and GSM/GPRS systems automatically apply a private call feature to every call, a third party that tries to listen in only hears noise.

The handset converts conversations into a digital signal and

sends it to the other party over the radio. If the signal cannot be reconverted properly by such as moving to an area with a weak signal, the voice may not be heard correctly.

Take notes of information (e.g. the phonebook, calendar, note,

voice memo, answering memo) stored on the handset or save the information to external memory devices such as microSD Cards and PCs periodically. DOCOMO shall not be liable for any loss of content due to a failure, repair, model change or other handling of the handset.

As with PCs, some user-installed apps, -accessed websites, etc.

may disrupt the stability of your handset performance or unexpectedly transmit information via the Internet causing improper use of your location information, personal information stored on the handset, etc. Therefore, verify the supplier and operating conditions of the apps, websites, etc. to be used before using them.

The handset supports the FOMA Plus-Area and the FOMA

HIGH-SPEED Area.

When the available space on the microSD Card or the handset is

insufficient, apps in use may not work properly. In this case, delete saved data.

The handset does not support connection to i-mode website

(program), i-appli, etc.

The handset does not support providers other than sp-mode,

mopera U and Business mopera Internet.

In the home screen, display the Apps Sheet

/[Settings]/

[Profile] to check your phone number (own number).

The handset does not support Public Mode (Drive Mode). Setting the handset to the manner mode does not mute sounds

(camera shutter sound etc.) other than the ringtone, operation sound, and various notification sounds.

The handset automatically performs communication for some

functions, for example, to synchronize data, check the latest software version or maintain connection with the server. Also, making a communication with large-volume data such as downloading apps or watching videos will lead to higher packet communication charges. Subscription to Packet Pack/flat-rate packet communication services is highly recommended.

Even while the Wi-Fi connection is set, packet communication

charges may be incurred depending on the app and service you use.

Software on the handset can be updated to up-to-date status

(>P. 95 “Software update”).

For details on software version of your handset >P. 80 “About

phone”

New functions may be added to the handset or the operation

method may change by upgrading the OS version. Check the DOCOMO website for the latest information on these additions and changes.

If the OS is upgraded, some apps used in the previous OS

version may not be available or some unintended bugs may occur.

Secure the security of the handset by setting Screen lock in case

you lose it (>P. 75 “Lock & security”).

If your handset is lost, change your password for each account

using a PC to prevent other persons from using Google services such as Gmail and Google Play

™

, and services such as SNS.

Apps and their service contents are subject to change without

prior notice.

Read the terms of service of Google Inc. for details on Google

services. Also, read each terms of service for details on other web services.

If the terms of service etc. is displayed, follow the instructions on

the screen and operate.

Subscription to Packet Pack/flat-rate packet communication

services is highly recommended to use tethering.

For details on usage fees etc., refer to the DOCOMO website. The display is manufactured using high-precision technology, but

it may contain dots that fail to light or that remain permanently lit on some areas. This is a characteristic of display and not a malfunction.

The battery is built into the handset and you cannot replace it by

yourself.

Note that DOCOMO shall not guarantee operation of

commercially available optional parts.

Using the handset

Contents/Precautions

Before use, read these “Precautions” carefully and use your

handset properly.

These precautions contain information intended to prevent

bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times.

The following symbols indicate the different degrees of

injury or damage that may occur if information provided is not observed and the handset is used improperly.

*1 Serious bodily injury: This refers to loss of eyesight, bodily

injury, burns (high- and low-temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long-term hospital attendance as an outpatient.

*2 Minor injury: This refers to bodily injury, burns (high- and

low-temperature), electric shock, etc. that do not require hospital admission for treatment or long-term hospital attendance as an outpatient.

*3 Property damage: This refers to extended damage to buildings,

furniture, livestock, pets, etc.

The following symbols indicate specific directions.

“Precautions” is explained in the following seven sections.

Handling the handset, adapters, Disney original cover and

docomo nano UIM card (general) . . . . . . . . . . . . . . . . . . . . . P. 4

Handling the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 5

Handling adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 6

Handling Disney original cover . . . . . . . . . . . . . . . . . . . . . . . P. 7

Handling docomo nano UIM card . . . . . . . . . . . . . . . . . . . . . P. 7

Handling near electronic medical equipment . . . . . . . . . . . . P. 8

Material list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 8

Precautions (ALWAYS FOLLOW THESE DIRECTIONS)

Danger

This symbol indicates that “death or serious bodily injury (

) may directly and immediately result from improper use”.

Warning

This symbol indicates that “death or serious bodily injury (

) may result from improper use”.

Caution

This symbol indicates that “minor injury (

) and/or property

damage (

) may result from

improper use”.

Indicates a prohibited action.

Indicates not to handle the device with wet hands.

Indicates not to disassemble the device.

Indicates that instructions specified are compulsory (must be followed).

Indicates not to use the device near water or get it wet.

Indicates that the power cord must be unplugged from the outlet.

Handling the handset, adapters, Disney original cover and docomo nano UIM card (general)

Danger

Do not use, store or leave the equipment in locations subject to high temperatures or accumulation of heat (near a fire or heating unit, in a kotatsu or bedding, under direct sunlight, inside a vehicle on a hot day, etc.).

May cause fires, burns, bodily injury, electric shock, etc.

Do not place the equipment inside cooking appliances such as microwave ovens and induction cookers or high pressure vessels such as pressure cookers, or near them.

May cause fires, burns, bodily injury, electric shock, etc.

Do not sprinkle sand, soil or dirt on the equipment or put the equipment directly on it. Also, do not touch the equipment when sand etc. is adhering to your hand.

May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness/ dustproofness. >P. 12 “Waterproof/Dustproof”

Do not charge the equipment while it is wet with liquids such as water (drinking water, sweat, seawater, pet urine, etc.).

May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness. >P. 12 “Waterproof/Dustproof”

Do not attempt to disassemble or modify the equipment.

May cause fires, burns, bodily injury, electric shock, etc.

Do not get the equipment wet with liquids such as water (drinking water, sweat, seawater, pet urine, etc.).

May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness. >P. 12 “Waterproof/Dustproof”

Do not allow liquids such as water (drinking water, sweat, seawater, pet urine, etc.) to get inside the charger terminal or external connection jack.

May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness. >P. 12 “Waterproof/Dustproof”

Use only optional parts specified by NTT DOCOMO.

May cause fires, burns, bodily injury, electric shock, etc.

Warning

Do not subject the equipment to strong force, impacts or vibration such as letting it fall, stepping on it or throwing it.

May cause fires, burns, bodily injury, electric shock, etc.

Do not allow conductive materials (such as metal objects and pencil lead) to come into contact with the charger terminal or external connection jack or dust to get inside it.

May cause fires, burns, bodily injury, electric shock, etc.

Contents/Precautions

Do not cover or wrap the equipment with bedding etc. when using or charging.

May cause fires, burns, etc.

If charging is not completed after the specified charging time, stop charging.

May cause fires, burns, bodily injury, etc. because of overcharging.

Be sure to turn off the handset and not to charge the battery in locations where flammable gas may be generated such as gas stations and where dust is generated.

May cause explosions, fires etc. if using the equipment in location where flammable gas etc. is generated. To use Osaifu-Keitai in locations such as gas stations, be sure to turn off the power in advance (If NFC/Osaifu-Keitai lock is set, disable the lock before turning off the power).

If any trouble such as an unusual odor, unusual noise, smoking, overheating, discoloration or deformation is found during use, charge or storage, follow the instructions below.

Unplug the power plug from the outlet or accessory

socket. Turn off the handset. May cause fires, burns, bodily injury, electric shock, etc. if you do not follow the instructions above.

Caution

Do not use a damaged equipment.

May cause fires, burns, bodily injury, etc.

Do not leave the equipment on unstable surfaces, such as on a wobbly table or sloped surface. Be very careful while the vibrator is set.

May fall and cause injury etc.

Do not use or store the equipment in locations that are subject to humidity, dust or high temperatures.

May cause fires, burns, electric shock, etc. Refer to the following for details on waterproofness/ dustproofness. >P. 12 “Waterproof/Dustpr oof”

If being used by a child, have a guardian teach him/ her the proper handling procedures and do not have him/her use it improperly.

May cause bodily injury etc.

Do not place the equipment where the young children can reach it.

A young child may swallow the equipment, or suffer bodily injury, electric shock, etc.

Be careful when using the handset continuously for a long time or charging because it may become warm. Also, be careful not to touch it unintentionally for a long time when you fall asleep etc.

The handset or adapter may become warm when using an app, a call, data communication, watching video, etc. for a long time or charging. Directly touching a warmed part for a long time may cause redness, itching, rashes, low-temperature burns, etc. on your skin depending on your constitution or health condition.

Handling the handset

Danger

Do not throw the handset into a fire or heat it.

May cause fires, burns, bodily injury, etc. because of catching fire, exploding, overheating or leaking of the battery.

Do not apply excessive force on the handset such as puncturing it with a nail (sharp object), hitting it with a hammer (hard object) or stepping on it.

May cause fires, burns, bodily injury, etc. because of catching fire, exploding, overheating or leaking of the battery.

If the substance etc. inside the internal battery comes into contact with your eyes, do not rub your eyes but immediately rinse your eyes with clean water. Then seek prompt medical treatment.

May result in loss of eyesight etc. because of the substance etc. inside the internal battery.

If the substance etc. inside the display comes into contact with your eyes or mouth, immediately rinse the contacted area with clean water. Then seek prompt medical treatment.

May result in loss of eyesight, sick, etc. because of the substance etc. inside the display.

Warning

Do not point the illuminated light directly at someone's eyes. Especially when you use it for young children, keep sufficient distance from them.

Do not use Mobile light near people's faces. Eyesight may be temporarily affected leading to accidents etc.

Do not illuminate or emit the mobile light at anyone driving a car or other vehicles.

May prevent a driver from driving safely and cause a traffic accident etc.

Do not watch the screen which is flashing repeatedly for a long time.

May cause spasm or loss of consciousness.

Do not allow water or other liquids (drinking water, sweat, seawater, pet urine, etc.), metal, flammable material or other foreign object to enter the docomo nano UIM card slot or microSD Card slot on the handset. Also, do not insert the docomo nano UIM card or microSD Card in the wrong place or wrong side.

May cause fires, burns, bodily injury, electric shock, etc.

Do not expose the camera lens to direct sunlight etc. for an extended period.

May cause fires, burns, bodily injury etc. because of the light-collecting mechanism of the lens.

Turn off the handset or set it to Airplane mode before going aboard an airplane.

Since using the handset on airplanes is restricted, follow the instructions given by the respective airlines. May interfere with the operation of electronic devices installed on the airplane. If you commit a prohibited act while using the handset on an airplane, you may be punished by law.

Contents/Precautions

Follow the instructions given by the respective medical facility regarding the use of the handset in a hospital.

Turn off the handset in areas where the use of mobile phones is prohibited. May interfere with the operation of electronic devices and electronic medical equipment.

Keep the handset away from the ears during a call in which hands-free is set, while the ringtone is ringing loudly, during stand-by, etc. When you attach the earphone/microphone etc. to the handset to play games, video/music, etc., do not make the volume too loud.

Excessively high volume or using the handset continuously for a long time may damage your hearing etc. Also, it may prevent you from hearing ambient sounds and cause an accident.

If you have a weak heart, take extra precautions when setting functions such as the vibrator and ringtone volume for incoming calls.

May have harmful effects on your heart.

If you are using electronic medical equipment etc., contact the respective manufacturer or dealer to check whether the operation of the equipment is affected by signals.

May interfere with the operation of electronic medical equipment etc.

Turn off the handset near high-precision electronic devices or devices that use weak electronic signals.

May interfere with the operation of electronic devices.

※ Take particular care with the following devices

Hearing aids, implanted cardiac pacemakers, implanted cardioverter-defibrillators, other electronic medical equipment, other equipment controlled by electronic signals, etc. If you use an implanted cardiac pacemaker, implanted cardioverter-defibrillator or other electronic medical equipment, contact the respective manufacturer or dealer to check whether the operation of the equipment is affect ed by signals.

If the display part or camera lens is damaged, be careful of broken glass and the exposed inside of the handset.

May cause burns, bodily injury, electric shock, etc. if you touch the broken or expose d parts.

If the internal battery leaks or emits an unusual odor, immediately stop using the handset and move it away from any naked flames or fire.

The battery fluid is flammable and could ignite, causing a fire, explosion, etc.

Do not allow a pet etc. to bite the handset.

May cause fires, burns, bodily injury, etc. because of catching fire, exploding, overheating or leaking of the internal battery.

Caution

Do not swing the handset by its strap etc.

May hit you or others around you, resulting in an accident such as bodily injury.

For using a motion sensor and geomagnetic sensor, check the safety around, hold the handset and do not swing it more than necessary.

May cause an accident such as bodily injury.

If the display is broken and the internal substance etc. then leaks, do not get it on your skin (face, hands, etc.), clothes, etc.

May result in damage to your eyes, skin, etc. If the internal substance etc. comes into contact with your eyes, mouth, skin or clothes, immediately rinse the contacted area with clean water. Also, if it comes into contact with your eyes or mouth, seek medical treatment immediately after rinsing the contacted area.

Do not dispose of the handset in ordinary garbage.

May cause fires, burns, bodily injury, etc. because of catching fire. Also, may damage to the environment. Take the unnecessary handset to a sales outlet such as a docomo Shop or follow the instructions by a local institution that handles used handsets.

If the substance etc. inside the internal battery leaks, do not get the liquid on your skin (face, hands, etc.).

If you use the handset in a vehicle, contact the vehicle manufacturer or dealer to check whether the operation of the vehicle is affected by signals.

May interfere with the operation of electronic equipment in some vehicle models. In this case, stop using the handset.

If any trouble on your skin occurs due to using the handset, immediately stop using it and seek medical treatment. Use of the handset may cause itching, rashes, eczema, etc. depending on your constitution or health condition.

Refer to the following for details on materials of each part. >P. 8 “Material list”

Make sure that there is no metal (a blade of cutter, staple, etc.) on the handset because the earpiece/ speaker section and back camera section contain parts that generate magnetic waves.

May cause bodily injury etc. because of the adhered object.

Look at the display in a well-lit place, keeping a certain distance.

Eyesight may be weakened etc. if you look at it in a dark place or closely.

Handling adapters

Warning

Do not use if the cord of the adapter is damaged.

May cause fires, burns, electric shock, etc.

Never use the adapter in humid locations such as a bathroom.

May cause fires, burns, electric shock, etc.

The DC adapter should only be used in negative grounded vehicles. Never use it in positive grounded vehicles.

May cause fires, burns, electric shock, etc.

Contents/Precautions

Do not touch adapters if you hear thunder.

May cause electric shock etc.

Do not short-circuit the charger terminal when connected to an outlet or accessory socket. Also, do not allow any part of your body (hands, fingers, etc.) to come into contact with the charger terminal.

May cause fires, burns, electric shock, etc.

Do not place heavy objects on the cord of the adapter or apply excessive force on it such as pulling it.

May cause fires, burns, electric shock, etc.

When plugging/unplugging an AC adapter into/from the outlet, do not allow metallic straps or other metallic objects to come into contact with the prongs of the plug.

May cause fires, burns, electric shock, etc.

Do not connect the voltage converter for overseas travel (travel converter) to the AC adapter.

May catch fire, or cause overheat, electric shock, etc.

Do not apply excessive force on the connection part with the adapter connected to the handset.

May cause fires, burns, bodily injury, electric shock, etc.

Do not handle the cord, charger terminal or power plug of the adapter with wet hands.

May cause fires, burns, electric shock, etc.

Always use the specified power supply and voltage. When using overseas, use the AC adapter that is available overseas.

Using the incorrect power supply and voltage may cause fires, burns, electric shock, etc. AC adapter: 100V AC (Connect only with a household AC outlet) AC adapter available overseas: 100 to 240V AC (Connect only with a household AC outlet) DC adapter: 12/24V DC (for negative grounded vehicles only)

If you replace the fuse in the DC adapter, always replace it with a specified fuse.

May cause fires, burns, electric shock, etc. if you use the fuse other than specified one. Refer to the respective manuals for information on specified fuses.

Wipe off any dust on the power plug.

May cause fires, burns, electric shock, etc. if you use the power plug with dust adhering.

Fully plug the adapter into the outlet or accessory socket.

May cause fires, burns, electric shock, etc. if you do not insert it securely.

Always grasp the adapters when unplugging the power plug from the outlet or accessory socket. Do not apply excessive force on it such as pulling the cord of the adapter.

May cause fires, burns, electric shock, etc. since the cord of the adapter is damaged by pulling it.

When plugging/unplugging an adapter into/from the handset, plug/unplug it straightly toward the terminal to connect, not applying excessive force on it such as pulling the cord.

May cause fires, burns, bodily injury, electric shock, etc. if you do not plug/unplug it correctly.

If the charger terminal is deformed such as bending it, immediately stop using. Also, do not use the deformed one by returning it to the original shape.

May cause fires, burns, bodily injury, electric shock, etc. because of short circuit of it.

Unplug the power plug of the adapter from the outlet or accessory socket when not using.

May cause fires, burns, bodily injury, electric shock, etc. if you leave the power plug with it plugged into the outlet or accessory socket.

If water or other liquids (drinking water, sweat, seawater, pet urine, etc.) enter the equipment, immediately remove the power plug from the outlet or accessory socket.

May cause fires, burns, electric shock, etc.

Always unplug the power plug from the outlet or accessory socket before cleaning the equipment.

May cause fires, burns, electric shock, etc. if you do not unplug it.

Caution

Do not touch the adapter for a long time when connected to an outlet or accessory socket.

May cause burns etc.

Handling Disney original cover

Caution

Do not pinch your fingers when attaching the Disney original cover.

May cause an accident such as bodily injury.

Make sure that there is no metal (a blade of cutter, staple, etc.) on the handset because the Disney original cover contains the magnetic.

May cause bodily injury etc. because of the adhered object.

If any trouble on your skin occurs due to using the the Disney original cover, immediately stop using it and seek medical treatment. Use of the the Disney original cover may cause itching, rashes, eczema, etc. depending on your constitution or health condition.

Refer to the following for details on materials of each part. >P. 8 “Material list”

Handling docomo nano UIM card

Caution

Be careful with the cutting surface not to injure any part of your body such as fingers when handling the docomo nano UIM card.

May cause bodily injury etc.

Contents/Precautions

Handset

Disney original cover SH01

Handling near electronic medical equipment

Warning

If you have electronic medical equipment such as an implanted cardiac pacemaker or an implanted cardioverter-defibrillator, always carry or use your handset at least 15 cm away from your implant.

Electromagnetic signals may have harmful effects on the operation of the electronic medical equipment.

Patients receiving medical treatment away from a medical facility (e.g. home treatment) who are using electronic medical equipment other than implanted cardiac pacemakers or implanted cardioverter-defibrillators should consult the respective manufacturers etc. for information regarding the effects of signals on the equipment.

Electromagnetic signals may have harmful effects on the operation of the electronic medical equipment.

If there is any chance that the distance between the handset and a person closest to you may get shorter than 15 cm such as when you cannot freely move around, set the handset not to emit radio wave in advance (by setting Airplane mode, turning the power off, etc.).

Somebody nearby may be equi pped with electronic medi cal equipment such as an implanted cardiac pacemaker or an implanted cardioverter-defibrillator. Electromagnetic signals may have harmful effects on the operation of the electronic medical equipment.

Follow the instructions given by the respective medical facilities regarding the use of the handset on their premises.

May have harmful effects on the operation of the electronic medical equipment.

Material list

Part Material/Surface treatment

Display side

Reinforced glass/Antifouling coating

Surrounding area of display side

PA resin (With glass)/Coating, Hard coating

Back

PC resin + ABS resin/Coating, Hard coating

Power key Aluminum/Anodizing

Volume up/down key Aluminum/Anodizing

Fingerprint sensor Epoxy resin/Hard coating

Camera panel Acrylic resin/Hard coating

Decoration of camera Aluminum/Anodizing

Mobile light PC resin

Earpiece/Speaker mesh SUS/Coating

External connection jack (Metal section)

Copper + SUS/Gold plating, Tin plating

External connection jack (Resin section)

PA resin

Docomo nano UIM Card and microSD Card cover

PC resin/Coating

Hinge section of docomo nano UIM Card and microSD Card cover

Elastomer resin

Gasket of docomo nano UIM Card and microSD Card cover

Silicon rubber

docomo nano UIM card slot SUS

microSD Card slot SUS/Ni plating

Tray for inserting docomo nano UIM card

POM resin

IMEI plate PET resin

Part Material/Surface treatment

Outside

Synthetic leather (PU (Polyurethane))

Inside Microfiber

Window frame section of display side

PC transparent resin

Mickey's head section of display side

Outside: PC transparent resin, Inside: PP (Polypropylene)

Camera frame section of back ABS resin

Stone section of back Glass (Swarovski

Crystals)

Contents/Precautions

DM-01J is waterproof/dustproof, however, do not allow

liquid such as water (drinking water, sweat, seawater, pet urine, etc.) and foreign object such as dust to get inside the handset and do not allow them to adhere to optional parts.

The adapter and docomo nano UIM card are not waterproof/ dustproof. Do not use in humid or steamy areas such as bathrooms and avoid exposing to rain and other forms of moisture. If they are carried close to the skin, perspiration may cause internal components to corrode and result in malfunction. Note that if a problem is found to be due to moisture, the handset and parts are not covered by warranty and in some cases may be irreparable. Even when repairs are possible, repair charges will be incurred, since the damage is not covered by warranty.

Clean only with a soft and dry cloth (such as the type used

for eyeglasses).

･ Forceful rubbing of the display with a dry cloth etc. may scratch its

surface.

･ Water drops, dirt, etc. left on the display may cause stains to form

on its surface.

･ Never use chemicals such as alcohol, thinners, benzene or

detergents, as these agents may erase the printing or cause discoloration.

Occasionally clean terminals with a dry cotton swab etc.

Dirty terminals may result in poor connections and loss of power or insufficient battery charge. Keep the terminals clean with a dry cotton swab etc. Be careful with the terminals while cleaning them.

Do not place the equipment near an air conditioning vent.

Condensation formed due to rapid changes in temperature may cause internal corrosion and lead to a malfunction.

Do not apply excessive force on the handset when using it.

Carrying the equipment in a tightly packed bag or sitting on it put in your pocket may cause damage to the display, internal components, internal battery, etc. or result in a malfunction. Keeping an external connector device plugged into the external connection jack may cause damage or a malfunction.

Do not rub or scratch the display with metal etc.

May scratch it and cause a malfunct ion or damage.

Use only optional parts specified by NTT DOCOMO.

May cause a malfunction or damage when optional parts other than those specified by NTT DOCOMO are used.

Read the respective user's guides supplied with supported

optional parts carefully.

Do not drop or otherwise subject the handset to severe

impact.

May cause a malfunction or damage.

Do not forcefully press the surface of the touch panel or

operate with a pointed object such as a fingernail, ballpoint pen or pin.

May damage the touch panel.

Avoid using the handset in extremely high or low

temperatures.

Use the handset within the range of a temperature between 5°C and 35°C and a humidity between 45% and 85%. Refer to the following for details on using it at a bathroom. >P. 12 “What you can do with waterproof/dustproof of DM-01J”

Using the handset close to land-line phones, TVs, radios,

etc. may have harmful effects on the operation of such equipment. Move as far away as possible from such items before use.

Back up to the microSD Card, PC, cloud, etc. or keep a

separate memo noting information stored on the handset.

DOCOMO shall not be liable for any loss of content.

When connecting an external connector device to the

external connection jack, do not put it in obliquely and do not pull it while it is plugged in.

May cause a malfunction or damage.

The handset becomes warm during use or charging but this

is not a malfunction.

Do not leave the camera in direct sunlight.

May cause discoloration or burn-in of pixels.

Use the handset with the docomo nano UIM Card and

microSD Card cover closed.

Liquid such as water (drinking water, sweat, seawater, pet urine, etc.) or foreign object such as dust may get inside and cause a malfunction.

Do not give a strong impact on the fingerprint sensor or

scratch the surface.

May cause not only malfunction of the fingerprint sensor but also disabling authentication.

Clean the fingerprint sensor with a soft and dry cloth (such

as the type used for eyeglasses).

When the fingerprint sensor is dirty or gets wet on the surface, it cannot read the fingerprint an d may degrade the authentication performance or cause an error.

While using a microSD Card, do not remove the card or turn

off the handset.

May cause data loss or a malfunction.

Never place a magnetic card near the handset.

The stored magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may be erased.

Never place magnetized items near the handset.

Putting highly magnetized items closer may cause an error.

Do not cover the proximity sensor area with a film or

sticker, or dirty it.

Each function for using the proximity sensor may not work normally. Refer to the following for details on the position of the proximity sensor. >P. 15 “Part names and functions”

The internal battery is a consumable product.

Though the battery life varies with use, change the battery if the battery life is extremely short even after being fully charged. For details on replacing the internal battery, contact the number listed in “Repairs” (in Japanese only) on the last page or a repair counter that DOCOMO specifies.

Charge battery in areas where ambient temperature is

between 5°C and 35°C.

The battery life depends on the usage and deterioration of

the battery.

Depending on usage, the internal battery may swell as it

approaches the end of its usable life. Note that if a problem is found to be due to swelling of the internal battery, the handset and parts are not covered by warranty and in some cases may be irreparable. Even when repairs are possible, repair charges will be incurred, since the damage is not covered by warranty.

Avoid the following situations when the handset is stored.

･ Storage with the internal battery fully charged (immediately after

charging is completed)

･ Storage with no battery level (cannot turn the handset on) May lower the performance or shorten the usable life of the internal battery. Approximately 40% is recommended as the proper battery level for storage.

The following is the type of the internal battery built into the

handset.

The surface of the handset uses the aluminum material.

Note that dent and abrasion are easily remained as aluminum is a soft material.

Handling precautions

General notes

Notes about the handset

Label Battery type

Li-ion00 Lithium-ion

Contents/Precautions

Charge the battery in areas where the ambient temperature

is between 5°C and 35°C.

Do not charge the internal battery in the following locations.

･ Areas with high humidity or dust, or in areas exposed to frequent

vibrations

･ Close to land-line phones, TVs, radios, etc.

Adapters may become warm during charging but this is not

a malfunction.

Do not use the DC adapter to charge the battery when the

car engine is not running.

May cause the car battery to run down.

When using an outlet with a feature to prevent the plug from

being removed accidentally, follow the instructions in the outlet user's guide.

Do not subject to strong impacts. Also, do not deform the

charger terminals.

May cause a malfunction.

The Disney original cover is not waterproof/dustproof. Attach/Remove the Disney original cover at your own risk. The Disney original cover does not completely prevent

damage or dirt.

All functions/operations are not completely guaranteed

while the handset is equipped with the Disney original cover.

Note that DOCOMO shall not be liable for a malfunction or

damage of the handset etc.

Adequately wipe off dust, oil/water, obstacles, etc. adhering

to the handset or the Disney original cover before equipping the handset with the Disney original cover.

May cause damage to the handset.

When you use NFC service/Osaifu-Keitai compatible

service, data may not be read properly depending on the reader/writer. In this case, remove the Disney original cover before use.

When the handset is equipped with the Disney original

cover and a thick LCD protective film or protective glass together, gaps may be left between the display side and the cover or the cover may not be closed. Also, it may affect operations of the small window.

May affect shooting results such as the light may reflect on

images when you shoot still pictures/videos using the mobile light. In this case, remove the Disney original cover before use.

Never pull the Disney original cover or place heavy objects

on it.

Do not keep the handset in a hot and humid place. Depending on how much you use it, color may fade. Depending on usage/conditions etc., the Disney original

cover may discolor. Do not heat or place it near fire. Also, color of the Disney original cover stains the contact objects depending on usage.

When dirt etc. adheres to the Disney original cover, wipe off

it with a soft cloth etc. At that time, do not use solvents such as polish removers, detergents, benzene, thinners, alcohol, etc.

May cause color loss or discoloration.

Never place a magnetic card near the Disney original cover

or pinch it.

The stored magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may be erased.

Note that there may be some uneven colored, wrinkles, etc.

on the Disney original cover because it contains synthetic leather.

The Disney original cover uses Swarovski

Crystals.

Note the followings when you use it.

･ Do not subject to strong impacts.

May damage Swarovski® Crystals.

･ If Swarovski® Crystals is damaged, do not use the Disney

original cover.

May cause bodily injury etc. if you touch the broken parts.

･ Do not rub the side of Swarovski® Crystals over the

surrounding objects.

May damage bags or clothes.

Do not apply unnecessary force when inserting/removing

the docomo nano UIM card.

Customer is responsible for malfunctions arising from

inserting docomo nano UIM card into a different IC card reader/writer etc.

Always keep IC area clean. Clean only with a soft and dry cloth (such as the type used

for eyeglasses).

Keep a separate memo and note information stored on the

docomo nano UIM card.

DOCOMO shall not be liable for any loss of content.

To protect the environment, please take any unneeded

docomo nano UIM cards to a sales outlet such as a docomo Shop.

Do not damage, touch haphazardly or short-circuit the IC.

May cause data loss or a malfunction.

Do not drop or otherwise subject the docomo nano UIM

card to severe impact.

May cause a malfunction.

Never bend the docomo nano UIM card or place heavy

objects on it.

May cause a malfunction.

Do not insert the docomo nano UIM card to the handset with

a label, sticker, etc. attached on the card.

May cause a malfunction.

The handset supports the security function that meets the

Bluetooth specification for security during communication using Bluetooth functions. However, the security may not be sufficient depending on the configuration etc. Take care of the security while making communication using Bluetooth function.

Even if any leak of data or information occurs while making

communication using Bluetooth function, DOCOMO shall not be liable for any loss of content.

Radio frequencies

In the home screen, display the Apps Sheet

/[Settings]/

[About phone]/[Authentication] to confirm the radio frequencies the Bluetooth function of the handset uses. The followings are the descriptions:

 2.4: This radio equipment uses the 2,400 MHz band.  FH: The modulation system is the FH-SS system.  1: The estimated coverage distance is 10 m or less.  XX: Another modulation system is used.  4: The estimated coverage distance is 40 m or less.  : All radio frequencies between 2,400 MHz

and 2,483.5 MHz are used and the frequencies for mobile object identifiers cannot be avoided.

Notes about adapters

Notes about Disney original cover

Notes about docomo nano UIM card

Notes on using Bluetooth function













Contents/Precautions

Cautions on using Bluetooth devices

Bluetooth operates at radio frequencies assigned to the in-house radio stations for a mobile object identifier that have to be licensed and are used in production lines of a factory, specific unlicensed low power radio stations, and amateur radio stations (hereafter, referred to as “another radio station”) in addition to industrial, scientific and medical devices or home electric appliances such as microwave ovens.

1. Before using the handset, make sure that “another radio station” is not operating nearby.

2. If radio interference between the handset and “another radio station” occurs, avoid interference by moving immediately to another place or “turning off the power”.

3. Contact the number listed in “General Inquiries” on the last page for further details.

Wireless LAN (WLAN) uses radio waves to communicate

information. Therefore, it has an advantage of freely connecting to the LAN within the service area. On the other hand, if security setting is not set, it is possible for a malicious third party to intercept the communication contents or hack. It is recommended to set security setting at your own risk and judgement.

Wireless LAN

Do not use wireless LAN near magnetic devices such as electric appliances or AV/OA devices or in radio waves.

･ Magnetism or radio waves may increase noises or disable

communications (especially when using a microwave oven).

･ When used near TV, radio, etc., reception interference may

occur or channels on the TV screen may be disturbed.

･ If there are multiple wireless LAN access points nearby and

the same channel is used, search may not work correctly.

Radio frequencies

In the home screen, display the Apps Sheet

/[Settings]/

[About phone]/[Authentication] to confirm the radio frequencies the WLAN-installed devices use. The followings are the descriptions:

 2.4: This radio equipment uses the 2,400 MHz band.  DS: The modulation system is the DS-SS system.  OF: The modulation system is the OFDM system.  4: The estimated coverage distance is 40 m or less.  : All radio frequencies between 2,400 MHz

and 2,483.5 MHz are used and the frequencies for mobile object identifiers can be avoided.

Available channels for the handset's wireless LAN are between 1 and 13. Note that other channel access points cannot be connected. Available channels may vary depending on the country. For use in an aircraft, contact the airline beforehand.

Cautions on using 2.4 GHz devices

WLAN-installed devices operate at radio frequencies assigned to the in-house radio stations for a mobile object identifier (radio stations requiring a license) used in production lines of a factory, specific low power radio stations (radio stations requiring no license), and amateur radio stations (radio stations requiring a license) in addition to industrial, scientific and medical devices or home electric appliances such as microwave ovens.

1. Before using this device, make sure that the in-house radio stations for a mobile object identifier, specific low power radio stations and amateur radio stations are not operating nearby.

2. If the device causes harmful radio interference to the in-house radio stations for a mobile object identifier, immediately change the radio frequency or stop use, and contact the number listed in “General Inquiries” on the last page for crosstalk avoidance, etc. (e.g. partition setup).

3. If the device causes radio interference to specific low power radio stations for a mobile object identifier or amateur radio stations, contact the number listed in “General Inquiries” on the last page for further details.

This product satisfies technical requirements based on

VCCI Rules for Voluntary Control Measures and its satisfied mark is displayed on the electronic nameplate of the product.

You can see the electronic name plate by operating the product as follows. In the home screen, display the Apps Sheet

/[Settings]/[About

phone]/[Authentication]

The FeliCa, NFC reader/writer and P2P function of the

handset use weak radio waves whose handling does not require a license of radio station.

The frequency in use is the 13.56 MHz band. When another

reader/writer or P2P function is being used nearby, keep enough distance from it. Make sure that there is no radio station using the same frequency band in the nearby area.

For use in an aircraft, contact the airline beforehand. Use of

the function may be restricted in some countries. Check conditions such as regulations of the country/region to use the function.

Never use the handset that is modified. Using a modified

device violates the Radio Law and/or the Telecommunications Business Law.

The handset follows the regulations regarding the certification of conformity with technical regulations for specific radio stations etc. based on the Radio Law and authentication of conformity with technical regulations for devices etc. based on the Telecommunications Business Law, and the “Technical Conformity Mark ” can be displayed on the electronic nameplate of the handset as a proof. You can see it by operating as follows. In the home screen, display the Apps Sheet

/[Settings]/[About

phone]

/[Authentication]

If the screws of the handset are removed and a modification is given to the inside, the certification of conformity with technical regulations etc. will become invalid. Never use the handset without the valid certification etc. Doing so violates the Radio Law and/or the Telecommunications Business Law.

Be careful when using the handset while driving a motor

vehicle.

Using the handset in hand while driving is regarded as a punishable act. However, the punishment has no application in some cases such as when rescuing sick and injured people or maintaining public safety.

The FeliCa reader and NFC reader/writer function of the

handset conform to the domestic radio wave standards. When you use it overseas, check conditions such as regulations of the country/region in advance.

Never change the basic software improperly.

This may be regarded as a conversion of software and repairs may be refused.

Notes about wireless LAN (WLAN)





 



Voluntary control for radio wave interference

FeliCa and NFC reader/writer

Caution

Contents/Precautions

DM-01J is waterproof to IPX5*1 and IPX8*2 standards, and dustproof to IP6X

standard if the docomo nano UIM Card and

microSD Card cover is securely closed.

*1 IPX5 means that phone keeps functioning after being subjected

to a jet flow (12.5 liters/min) discharged from a nozzle (inner diameter: 6.3 mm), from all directions (approximately 3 m from the handset) for 3 minutes or more.

*2 IPX8 means that DM-01J phone keeps functioning after it is

slowly submerged to depth of 1.5 m in static tap water at room temperature, left there for approximately 30 minutes and then taken out.

*3 IP6X means the level of dust protection. Phone has the ability

to prevent dust from entering inside after it is left in the device containing dust (diameter: 75 μm or smaller) for 8 hours, agitated and then taken out.

You can call without using an umbrella in the rain (for rainfall of

approximately 20 mm per hour).

You can rinse dirt off from the handset. Wash the handset with

low-pressure water flow (6 liters/min or lower and tap water at room temperature (between 5°C and 35°C)), holding it approximately 10 cm below faucet or shower head. Wash by using only your hands, not a brush or sponge, with the docomo nano UIM Card and microSD Card cover held in position. Drain the handset before use (>P. 13 “Draining water when the handset gets wet”).

You can use the handset at a poolside. Do not throw water in a

swimming pool on the handset or soak the handset in the water of a swimming pool.

You can use the handset in a bathroom.

･ Do not let the handset get wet with liquids other than water at

room temperature (hot spring water or water containing soap, detergent or bath powder) or do not soak the handset in a bathtub.

May cause a malfunction. If the handset gets wet with liquids other than water at room temperature or you fall the handset into the bathtub, immediately rinse it in the specific procedure.

･ Use the handset within 2 hours in a bathroom where the range

of a temperature is between 5°C and 40°C and a humidity is 99% or less.

All function's continuous ope rations are not completely guar anteed.

･ If the handset gets wet, be sure to drain water and dry naturally

in the specific procedure (>P. 13 “Draining water when the handset gets wet”).

Also, drain water after using the handset in a bathroom or when condensation occurs inside the camera lens.

･ The rapid changes of temperature may cause condensation.

Wait until the handset reaches room temperature before you bring it from a cold place into a warm place such as a bathroom. Also, do not splash cold water on the warmed handset in a bathroom. May cause a malfunction.

･ Never charge the battery in a bathroom. ･ The signal does not reach and a call or data communication

may not be available depending on the structure and conditions of the bathroom.

･ When you operate the handset with wet hands, it may not

respond or inadvertent operations may occur.

･ Do not use the handset connected to an earphone or external

connector device in a bathroom.

To maintain waterproof/dustproof performance, check the followings.

Securely close the docomo nano UIM Card and microSD Card

cover. Be careful not to apply excessive force on the rubber gasket when opening and closing.

Make sure that the docomo nano UIM Card and microSD Card

cover is completely closed without floating.

To maintain waterproof/dustproof performance, the handset has

the docomo nano UIM Card and microSD Card cover that allows you to close securely. Note that opening it forcibly may cause injuries to your nails, fingers, etc.

For details on how to open/close the docomo nano UIM Card and

microSD Card cover >P. 16 “Inserting docomo nano UIM card”

When your hands are wet or water/foreign object adheres to the

handset, do not open/close the docomo nano UIM Card and microSD Card cover.

Close the docomo nano UIM Card and microSD Card cover

securely. Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surfaces may allow liquids or dust to get inside.

If the handset gets wet with water or other liquids with the

docomo nano UIM Card and microSD Card cover opened, the liquid may get inside causing electric shocks or malfunction. Stop using the handset, turn off the power and contact a repair counter that DOCOMO specifies.

The rubber gasket of the contact surface between the main body

and docomo nano UIM Card and microSD Card cover plays an important role in maintaining waterproof/dustproof performance. Do not remove or scratch it. Also, prevent dust from adhering to it. If the rubber gasket is damaged or deformed, contact a repair counter that DOCOMO specifies.

Do not insert a pointed object through the docomo nano UIM

Card and microSD Card cover gaps. It may cause damage to the rubber gasket and allow liquids or dust to get inside.

Do not use the handset underwater (including key operations).

May cause a malfunction.

Do not directly apply water flow stronger than allowed (over 6

liters/min). May cause malfunction though DM-01J provides waterproof performance of IPX5.

Do not let the handset get wet with liquids other than water at

room temperature (between 5°C and 35°C) or do not soak the handset in the liquids. If you let the handset get wet with liquids other than water at room temperature or soak the handset in the liquids, stop using the handset and wash it with water at room temperature.

Do not wash the handset in a washing machine etc. To prevent condensation, wait until the handset reaches room

temperature before you bring it from a cold place to a warm place.

Never soak the handset in hot spring water or water containing

soap, detergent or bath powder.

Do not soak the handset in hot water, use it in a sauna or apply

hot air (from a hair dryer etc.) to it.

Do not soak the handset in seawater. Do not put the handset directly on sand/dirt.

Waterproof/Dustproof

What you can do with waterproof/dustproof of DM-01J

Things to keep in mind

To maintain waterproof/dustproof performance, replacement of

parts is recommended every 2 years regardless of whether the handset appears normal or abnormal. DOCOMO replaces the parts as a chargeable service. Bring the handset to a repair counter that DOCOMO specifies.

Precautions

Contents/Precautions

If foreign object such as salt water, seawater, drink, seasoning,

food, dirt or soil adheres to the handset, rinse it off immediately. If it becomes dry and hard, it is difficult to remove it and may cause damage or malfunction.

Do not leave the handset wet. In cold places, water may freeze

and cause malfunction.

The handset does not float on water. Do not let the handset fall. It may become scratched and cause

the waterproof/dustproof performance to degrade.

Do not leave water on the mouthpiece/microphone, earpiece/

speaker or earphone/microphone terminal. Such water may interfere with talking.

Do not poke the mouthpiece/microphone, earpiece/speaker,

external connection jack, earphone/microphone terminal, etc. with a pointed object.

Do not insert an earphone/microphone to the handset while the

handset is wet. May cause a malfunction.

Accessories or optional parts are not waterproof/dustproof. Do

not use them in rooms where water is regularly in use such as bathroom, shower room, kitchen or lavatory.

When the handset is wet, water may flow out after wiping it off. Drain the water by following the steps below.

Wipe off water on the handset surface with dry and clean cloth etc.

: If a strap is attached, dry the strap as well.

Shake the handset approximately 20 times, securely holding it, until there is no more water splattering

Softly press the handset against dry and clean cloth etc. to wipe off water remaining in the grooves of the mouthpiece/microphone, earpiece/speaker, keys, external connection jack, earphone/microphone terminal, strap hole, etc.

: Pat the opening with cloth etc. to remove water because

there may be any water remaining in the grooves of each part.

Wipe off water oozing from the handset with dry and clean cloth etc. and dry naturally for approximately 3 hours

: Water, if any, remaining in the main body may ooze after

wiping off.

: Pat the opening with cloth etc. again to remove water

because you may not be able to hear sounds well if drainage is insufficient.

DOCOMO does not guarantee actual operations under all

states. Malfunctions deemed to be caused by inappropriate operation by the customer are not covered by the warranty.

Draining water when the handset gets wet

Soap/Detergent/ Bath powder

Seawater

Swimming pool

Hot spring Sand/Dirt

To drain water off, shake the handset with the mouthpiece/microphone turned down

To drain water off, shake the handset with the earpiece/speaker turned down

Contents/Precautions

Accessories or optional parts are not waterproof/dustproof. Check the followings before and after charging.

Make sure that there is no water or foreign object on the handset.

If foreign object adheres to the handset, immediately rinse it off. Also, if the handset is wet or after the handset is wet, adequately drain it and wipe off water with dry and clean cloth etc. then dry naturally before opening the docomo nano UIM Card and microSD Card cover.

Charging

Warning

Never try to connect the microUSB plug when the handset is wet or foreign object adheres to the handset.

The AC adapter (sold separately) does not provide waterproof/

dustproof performance though the handset provides them. Inserting the microUSB plug while the equipment is wet or dirty may cause short circuit when you charge the battery and lead to abnormal overheat, malfunction, fires or burns due to water, foreign object, etc. adhering to the handset or microUSB plug.

Do not touch an AC adapter with your hands wet. May cause

electric shock.

Do not use the AC adapter in a place subject to water. Do not

use it in rooms where water is regularly in use such as bathroom, shower room, kitchen or lavatory. May cause fires or electric shock.

Before Using the Handset

1 Docomo nano UIM Card and microSD Card cover 2 docomo nano UIM card slot

The tray for inserting the docomo nano UIM card is stowed. For details on docomo nano UIM card >P. 16 “docomo

nano UIM card”

3 microSD Card slot

For details on microSD Card >P. 81 “microSD Card

(external storage)”

4 Front camera

For details on using camera >P. 56 “SHCamera”

5 Earpiece/Speaker

The other party's voice on the phone, ringtone, music, etc. can

be heard from here.

6 Proximity sensor/Brightness sensor

The proximity sensor detects the distance to the face and

prevents inadvertent operation of touch panel during a call.

The brightness sensor detects the brightness of the

surrounding area and adjusts the brightness of the backlight.

7 Display/Touch panel

When the handset is equipped with the Disney original cover,

you can turn the display on/off by opening/closing the cover. For details on the Disney original cover >P. 19 “Disney original cover”

For details on operation of the touch panel

>P. 20 “Operation of touch panel”

8 Incoming/Charging illumination

For details on incoming/charging illumination

>P. 28 “Incoming/Charging illumination”

9 1/2: Volume up/down key

Adjusts the volume in each function.

a 0: Power key

Use to turn the power on/off, etc. Use to turn the display on/off. For details on operation of the power key >P. 19 “Turning

power on/off”

b Fingerprint sensor

Use to unlock the touch panel etc. by fingerprint

authentication.

For details on using fingerprint sensor >P. 76 “Fingerprint

authentication”

c Strap hole d Back camera

For details on using camera >P. 56 “SHCamera” e Earphone/Microphone terminal f Mobile light g

# mark

IC card is contained (It cannot be removed).

For details on using

# mark >P. 54 “Osaifu-Keitai”,

P. 85 “NFC communication”

h External connection jack

For details on connection to an external device

>P. 18 “Charging with AC adapter/DC adapter”, P. 86 “PC connection”, P. 86 “USB host function”

i Mouthpiece/Microphone

Use it during call, when recording videos, talking to EMOPA,

etc.

j LTE/FOMA antenna

k GPS antenna

l Wi-Fi/Bluetooth antenna

*1 Do not cover the sensor area with your hand or paste a sticker

etc. on the sensor area. The sensor may not work properly.

*2 The antenna of back is built into the main body. Covering the

antenna area with your hand may influence the communication quality.

Before Using the Handset

Part names and functions

The back cover cannot be removed. Removing it forcibly may

cause damage or malfunction.

Earpiece/Speaker

This handset combines the earpiece and speaker. When you

convert to a hands-free talking, end a call, etc., sound gradually

increases to the set volume to prevent a loud sound from the

speaker at your ear.

When you use [Answer] function of Suguden, the handset

detects that your ear is closing to the speaker from which the

ringtone is ringing and the ringtone volume is changed to

proper volume. However, the loud volume may be sounded

about your ear such as when not detecting that your ear is

closing, so set the ringtone volume properly and use.

Before Using the Handset

A docomo nano UIM card is an IC card that records personal information, such as your phone number.

You cannot use functions such as the phone or packet

communication without inserting a docomo nano UIM card.

In Japan, you cannot call to the emergency number (110, 119 or

118) without inserting a docomo nano UIM card.

A docomo nano UIM card has a security code called PIN code

(>P. 76 “PIN code”).

The handset supports only docomo nano UIM card. If you have a

docomo mini UIM card, UIM or FOMA card, bring it to a docomo Shop to replace.

Before inserting or removing the docomo nano UIM card, turn off

the power. Hold the handset securely with your hand.

■ Inserting docomo nano UIM card

Open the docomo nano UIM Card and microSD Card cover

: Hook the tip of a finger into the slot and pull out it forward

(1), and then rotate it in the direction of the arrow to open (2).

Remove the tray from the docomo nano UIM card slot

: Hook the tip of a finger into the tray to remove it by slowly

pulling it straight out.

Hold the docomo nano UIM card with the IC (gold) side turned up and set it on the tray

Insert the tray slowly into the docomo nano UIM card slot

: The docomo nano UIM card slot is at the right side of the

microSD Card slot. When you insert the tray, be careful not to insert it to the microSD Card slot.

: Do not forcibly insert the tray at an angle or with the wrong

side up. The docomo nano UIM card slot or tray may be damaged.

Close the docomo nano UIM Card and microSD Card cover

: Stow the hinge section of the docomo nano UIM Card and

microSD Card cover (1) and push the cover in the direction of the arrow to close it so that gaps are not left between the handset and the cover (2). When closing it, push securely like tracing it in the direction of the hinge section (3).

Mobile light

The mobile light may be automatically turned off if you use the

handset for a long time or the handset becomes warm after the mobile light is turned on. Also, you may not be able to use the mobile light if the handset is warm.

Microphone

When using functions which support the microphone, do not

cover the hole of the microphone.

Earphone/Microphone

Depending on the type of the earphone/microphone, it may not

be available.

docomo nano UIM card

Slot

Notch

IC (gold)

docomo nano UIM card slot (right side)

Hinge section

Before Using the Handset

■ Removing docomo nano UIM card

Open the docomo nano UIM Card and microSD Card cover

Remove the tray from the docomo nano UIM card slot

Remove the docomo nano UIM card from the tray

Insert the tray slowly into the docomo nano UIM card slot

Close the docomo nano UIM Card and microSD Card cover

The internal battery is not fully charged at the time of purchase. Be sure to charge the battery before use.

■ Cautions while charging

For details on the estimated charge time >P. 96 “Main

specifications”

The battery can also be charged with the handset turned on

(While charging, the battery icon appears with [ ] superimposed).

Do not charge for a long time with the power left turned on. If the

handset is left turned on after charging is complete, the internal battery charge level decreases. In this case, an AC or DC adapter (sold separately) charges the battery again. However, depending on the time when the handset is disconnected from the AC or DC adapter, the battery charge level may be low or the battery may only be usable for a short time.

If the handset is left for a long time even after the charging is

completed, the battery level may decrease.

When the battery is empty and the handset is being charged, the

charging illumination may not illuminate immediately. However, charging is in progress.

If the battery empty alert is displayed and the power cannot be

turned on, charge the battery for a while.

While charging, the handset may not be turned on even when the

charging illumination is illuminated in red. Charge longer and try turning the power on again.

Frequently recharging the battery when its power is still

remaining enough may shorten the usable life of the internal battery. It is recommended to use the battery to a certain level (e.g. after the battery level decreases) before recharging.

When the battery becomes warm, charging may automatically

stop even if the battery has not been fully charged. Charging automatically resumes after the temperature lowers to an appropriate temperature.

■ Estimated battery life when fully charged

For details on the battery life >P. 96 “Main specifications”

Do not allow the docomo nano UIM card or tray to fall when

removing them.

Make sure not to touch or damage the IC (gold) of the docomo

nano UIM card when handling it. Also, note that inserting or removing the docomo nano UIM card forcibly may damage it or deform the tray.

Refer to the docomo nano UIM card user's guide or the

DOCOMO website for more information on the docomo nano UIM card.

Do not misplace the docomo nano UIM card once it is removed.

IMEI plate

A plate on which the IMEI number (International Mobile

Equipment Identifier) is printed is stowed near the docomo nano UIM card slot. The IMEI number is required when you contact a repair counter that DOCOMO specifies, so do not pull it out.

Note that pulling out the IMEI plate forcibly or adding forces on

it may damage the plate.

If you accidentally pull out the IMEI plate, slowly return the IMEI

plate to the original position while taking care not to insert it too deep.

Charging

Continuous talk time

FOMA/3G

Approx. 860 min

GSM

Approx. 880 min

VoLTE (Voice call)

Approx. 880 min

Continuous stand-by time

FOMA/3G

At rest: Approx. 900 hr (Preferred network type: 4G/3G/GSM(Auto))

GSM

At rest: Approx. 750 hr (Preferred network type: 4G/3G/GSM(Auto))

LTE

At rest: Approx. 780 hr (Preferred network type: 4G/3G/GSM(Auto))

Before Using the Handset

■ Internal battery usable life

Internal battery is a consumable product. Battery life per charge

is gradually reduced every time the battery is charged.

When battery life per charge is reduced to approximately half of

the default time, this means that the internal battery is approaching the end of its usable life. In this case, it is recommended to replace the battery as soon as possible. For details on replacing the internal battery, contact the number listed in “Repairs” (in Japanese only) on the last page or a repair counter that DOCOMO specifies.

If you watch videos etc. while charging for a long time, the usable

life of the internal battery may become shorter than estimated.

■ AC adapter and DC adapter

Refer to user's guide of AC Adapter 05 (sold separately) or DC

Adapter 04 (sold separately).

AC Adapter 05 covers from 100 to 240V AC. The shape of the plug for the AC adapter is for 100V AC (for

domestic use). To use the AC adapter of 100 to 240V AC overseas, a conversion plug adapter applicable to your country of stay is required. Do not use a voltage converter for overseas travel to charge the battery.

[Read the user's guides of AC Adapter 05 (sold separately) and DC Adapter 04 (sold separately)]

Following operations describe how to charge with AC Adapter 05

or DC Adapter 04.

Insert the microUSB plug of the AC adapter/DC adapter horizontally into the external connection jack on the handset with the side marked with “B” turned up

: Check the direction (front or rear) of the microUSB plug and

insert it horizontally.

When you erect the AC adapter power plug and insert it into an outlet or insert the DC adapter power plug into a car accessory socket, the charging illumination illuminates and charging starts

When charging is complete, the charging illumination turns off

Remove the AC adapter power plug from the outlet, or remove the DC adapter power plug from the car accessory socket

Remove the microUSB plug of the AC adapter/ DC adapter horizontally from the external connection jack

You can charge the handset by connecting the handset to a PC with Micro USB Cable 01 (sold separately).

For details on connecting to a PC >P. 86 “PC connection”

Charging with AC adapter/DC adapter

Charging illumination

microUSB plug

Keep side marked with “B” up

External connection jack

Note that inserting or removing the equipment forcibly may

cause damage to the external connection jack and the

microUSB plug or result in a malfunction.

When using a DC adapter

The DC adapter should only be used in negative grounded

vehicles (12 and 24V DC).

Do not use with the car engine shut off. May drain the car

battery.

The DC adapter fuse is a consumable product. For

replacement, purchase a new fuse at a nearest auto parts

retailer etc.

Refer to the user's guide of DC Adapter 04 for details.

Charging with Micro USB Cable 01

100V AC outlet

Accessory socket

AC adapter DC adapter

Power plug

Before Using the Handset

■ Turning power on

0 (for at least 2 seconds)

: When you turn the power on for the first time, make the initial

settings (>P. 25 “Initial settings”).

■ Turning power off/Reboot/Emergency mode

0 (for at least 1 second)

Select an item



Power off: Turn off the handset.



Reboot: Reboot the handset.



Emergency mode: For details >P. 22 “Emergency mode”

■ Turning display on/off

The display is turned off when 0 is pressed or the handset is not in use for a set length of time. Press 0 while the display is turned off to turn it on.

■ Touch panel lock

When the power or the display is turned on, the touch panel is locked. Slide [ ] up to unlock.

Operations in touch panel lock screen

To set/disable the manner mode: 2 (for at least 2 seconds) To activate/set shortcuts: Slide [ ] up To activate SHCamera: Slide [ ] up To display the detailed information on notifications: Drag the

clock down

To display the status panel: Drag the status bar down

When the handset is equipped with the included Disney original cover SH01, you can turn the display on/off by opening/closing the cover. Also, you can carry out operations such as receiving a call with the cover closed.

If you close the cover obliquely, the display may not be turned off.

■ Inserting Disney original cover

Make the handset and Disney original cover face the same direction and attach the top of the handset to the cover

Put the bottom of the handset into the Disney original cover

■ Removing Disney original cover

Remove the under side of the handset in order of right (1) b left (2)

You can carry out operations such as receiving a call with the Disney original cover closed.

You can use the small window screen when [View with disney

cover] is set to ON (>P. 70 “Useful”).

･ When [View with disney cover] is set to ON and Screen lock is

set to [None], the display is not turned off by closing the cover. Also, you cannot use the the small window screen.

･ When [View with disney cover] is set to ON and Screen lock is

set to [Swipe or Touch], open the cover to unlock the screen

lock. The small window screen is turned off when 0 is pressed or the handset is not in use for a set length of time. When the small window screen is turned off, press

to turn it

on.

When EMOPA is set to OFF, the small window screen turns

Disney mode. Operation methods may differ from when EMOPA is set to ON depending on the function.

Turning power on/off

The notifications are displayed in the lock screen of the touch

panel. You can make settings for displaying of notifications in [When device is locked] (>P. 68 “Sound & notification”).

If you set [ー設定] (EMOPA settings) to ON, various

information delivered by EMOPA is displayed under the clock. Depending on the information, you can check the related information or details by touching it twice. Also, when [ー] (EMOPA memo) is ON, you can use

EMOPA memo in the lock screen of the touch panel. ･ For details on EMOPA >P. 71 “EMOPA”

Disney original cover

Using the small window screen

Before Using the Handset

■ Stand-by screen

When you close the cover, the stand-by screen is displayed.

When EMOPA is set to OFF

You can enjoy characters animation of Mickey Mouse and others. Various animation is displayed according to the time period. Touch the screen to switch the clock and weather information.

･ Weather information whose areas are set in the “Disney天気予

報” (Disney weather forecast) app is displayed.

When EMOPA is set to ON

Various information delivered by EMOPA is displayed under the clock. Slide [ ] up to activate the camera. You can shoot still pictures/

videos using the back camera with the cover closed.

While playing music, the operation panel is displayed under the

clock. You can operate such as playing/pausing music with the cover closed.

■ Call

You can answer a call with the cover closed. Also, you can make a call to the other party of latest history when there is a missed call while the cover is closed.

To answer a call: Slide [ ] to the right To end a call: Slide [ ] to the left To make a call: Slide [ ] to the right

■ SMS

When receiving SMSs while cover is closed, touch the screen to check the preview.

■ Alarm

When the time for an alarm to ring arrives while cover is closed, you can stop the alarm with the cover closed. The operating method is the same as the usual screen

(>P. 63 “Stopping an alarm”).

When EMOPA is set to OFF, Disney animation is displayed while

the Disney kisekae alarm rings.

･ You cannot stop the Disney kisekae alarm while the cover is

closed. When you stop the alarm, open the cover.

The followings describe basic operations of the handset such as operations of the touch panel and navigation keys, and operations for shooting screenshot.

The followings describe the operations to use the display (touch panel).

Operations may differ depending on the function and screen in

use.

■ Touch

Touch a key or an item displayed on the screen and then release your finger from it to select or set it.

■ Touch and hold

When you keep your finger on the touch panel, a menu may appear depending on the function and screen in use.

■ Slide (Swipe)/Drag

Move your finger while keeping it on the touch panel to scroll the screen or move an icon, a widget, etc. to the desired position. In addition, when you touch a menu or an item by mistake, move your finger away from it to cancel the selection.

■ Flick

Move your finger like sweeping the touch panel in the home screen etc. to switch pages.

■ Pinch out/Pinch in

You may be able to zoom the screen in/out etc. by putting two fingers on the touch panel and moving them with putting a distance between two fingers apart (pinch out)/closer (pinch in) depending on the function and screen in use.

You can use the camera and play music when EMOPA is set to

ON.

You need to carry out First things first to use all call functions

when using the small window screen. Touch [Initial settings for a cover] in the status panel in advance and follow the instructions on the screen and operate.

Basic operation

Operation of touch panel

Cautions when using the touch panel

The touch panel is designed to be lightly touched with your

finger. Do not forcefully press with your finger or a pointed object (fingernail, ballpoint pen, pin, etc.).

In the following cases, the touch panel may not work even if

you touch it. May cause a malfunction.

Operation with a gloved finger Operation with the tip of a fingernail Operation with foreign object placed on the operation pad Operation on the touch panel on which a protective sheet,

sticker, etc. is put

Operation while the touch panel is wet Operation with fingers wet with sweat, water, etc. Operation under water

Operations may be interrupted if you touch an area other than a

confirmation screen or the status bar while the confirmation screen etc. is displayed.

Before Using the Handset

■ Navigation keys

Use the navigation keys displayed at the bottom of the screen to perform the basic operations.

1 A/@: Back key/Close key

Return to the previous screen. Close the keyboard.

2 B: Home key

Display the home screen.

3 C: Recent Apps key

Display Recent Apps (>P. 34 “Recent Apps”).

■ Using user-aid function

You can quickly activate an app supporting the user-aid function.

Touch and hold [B]

: To set an activating app: In the home screen, display the

Apps Sheet

/[Settings]/[Apps]/[]/[Default Apps]/

[Assist & voice input]/[Assist app]/select an app

■ Retrieving menu

When you touch [ ]/[ ]/[ ] etc., slide the left edge of the screen to the right or touch and hold the screen, functions (menus) available in that screen appear.

Example: World clock screen

■ Switching the settings

When a check box etc. is displayed beside the setting item, you can set it enabled/disabled or ON/OFF by touching it.

Example: Call settings screen, Date & time screen

[ ]: Enabled, [ ]: Disabled

[ ]: ON, [ ]: OFF

■ Vertical/Horizontal display

The screen display is switched when you tilt the handset. Vertical/Horizontal display may not be switched even if the

handset is turned depending on the screen being displayed.

Vertical/Horizontal display is not switched if the handset is turned

while it is positioned parallel to the ground.

The screen display may not be switched properly when a sound

or a vibration is being activated.

Vertical/Horizontal display may not be switched properly right

after the display or power is turned on.

You can set the display not to automatically switch

(>P. 69 “Display”).

Screens may be displayed in the full screen depending on the

app when you switch from vertical display to horizontal display.

Hold 0 + 2 down for at least 1 second to shoot the screen being displayed as an image.

Shot images are saved on the handset memory and you can

check them by using Album etc.

Alternatively, you can shoot the screenshot by using Clip Now

(>P. 70 “Clip Now”).

Twist your wrist holding the handset to switch to the previous app that you have used.

In the home screen, display the Apps Sheet/ [Settings]/[Useful]/[Twist magic]

Select an item



Turn on/off Twist magic: Set whether to use Twist magic.



Setting to restrict operation: Set apps in which operations of

Twist magic are restricted. Twist magic is not operated while using the set app.



Let's Try!: Try functions or check how to use with a video

tutorial by using “Let's Try!”.

Operation while using function

Shooting screenshot

Data cannot be saved while displaying e-books etc.

Data may not be saved completely or partially depending on the

app.

Twist magic

This function may not work depending on the app in use. Also,

in the following cases, Twist magic is not available.

On horizontal display In the lock screen In the home screen In the status panel During an incoming call While Childlock set While [Screen pinning] function activated While “Let's Try!” displayed

Before Using the Handset

■ Using Twist magic

Twist your wrist, holding the handset (1)

Return your wrist to the original position (2)

: Switch to the previous app that you have used.

Switching Apps

Switch to the second app displayed in Recent Apps. Operate repeatedly to switch between the top and the second app displayed in it alternately. For details on Recent Apps >P. 34 “Recent Apps”

1 The second usage history item

This is the history item of previous app that you have used.

Carry out Twist magic to switch to this app.

2 The top usage history item

This is the history item of app that you are using. Carry out

Twist magic to move it to the second one in Recent Apps.

You can save the internal battery by restricting settings and functions on the handset.

0 (for at least 1 second)/[Emergency mode]

/[OK]

: The handset restarts and it switches to Emergency mode.

■ Disabling Emergency mode

0 (for at least 1 second)/[Emergency mode]

/[OK]

: Alternatively, in the Emergency mode screen, [Stop

saving]

/[OK] to disable Emergency mode.

: The handset restarts and Emergency mode is disabled.

In the home screen, display the Apps Sheet/ select “Google” folder/[Google]

: If the confirmation screen for Google Now™ is displayed,

check the content, follow the instructions on the screen and operate.

: Quick search box appears.

Enter the keyword

1 Search box

Enter the keyword to search with. When the keyword is entered, apps, data, etc. whose

names start with the entered characters are searched and displayed as a list.

2 Switch to Voice Search

Alternatively, say “Ok Google” at the microphone to

switch to Voice Search.

Select the search result

: When a search result is an app, the corresponding app is

activated.

: If [IMAGES] etc. is displayed, you can search by selecting a

genre.

: When you cannot see search results hidden behind the

keyboard, touch [@] to close the keyboard.

You can enter characters using the QWERTY keyboard, 12 keyboard, voices and kuten codes.

When entering characters, touch [ ] at the bottom of the

screen to set the input software to use. The explanations are based on the case when [S-Shoin] is set here.

You can use the following two types of the keyboards.

※Each key may change depending on the settings and the

condition.

The history item may not be remained in Recent Apps

depending on the app. You cannot switch to the app whose history item is not remained.

Emergency mode

Searching information on the handset and websites

When [ ] is displayed in the search results screen etc., touch

[ ] to set the search.

Character entry

Keyboard layouts

QWERTY keyboard

You can enter a displayed character by touching the character entry key. Use romaji for entry.

12 keyboard Several characters are assigned to one

character entry key. Enter characters by flicking a character entry key up/down or to the left/right. You can enter characters by touching a

character entry key until a character which you want to enter is displayed.

QWERTY keyboard

12 keyboard

Before Using the Handset

1 Shift key

Touch to switch between upper/lower case characters etc.

･ When [ ] is displayed, lower case characters are entered.

When [ ] is displayed, the first character to be entered becomes upper case one. When [ ] is displayed, upper case characters are entered.

･ Symbols that can be entered using the keyboard change

when you switch the upper/lower case characters.

2 Input mode switching key

Switch input modes.

･ Touch to switch input modes in the order of Half Numeric b

Hiragana/Kanji b Half Alphabet. Slide to the right to switch input modes in the order of Hiragana/Kanji b Half Numeric b Half Alphabet.

･ Slide up to select an input mode from the list.

Hiragana/Kanji Half Alphabet Half Numeric Full Alphabet Full Numeric Character Code

･ The keyboard set in each input mode is displayed.

3 Delete key

Delete characters displayed in a direction set in Delete key

behavior.

4 Enter key

Insert a line feed. Determine the entered characters. Execute operations entered in an entry field such as the

search box.

Move to the next entry field. Touch and hold to close the keyboard.

5 Symbol key

Display the pictogram/Deco-mail pictogram/symbol/emoticon

list. ･ You cannot enter these symbols in some apps.

Slide to the right to display Quote apps list.

6 Katakana and alphabet key

Display katakana of the entered characters or conversion

candidates (katakana and alphabet conversion candidates) of alphabets or symbols assigned to a touched key.

Slide to the right to display Quote apps list.

7 Undo key

Undo the previous operation.

8 Setting key

Display setting menu.

9 Space key

Enter a space.

a Conversion key

Convert the input characters.

b Cursor key

Move the cursor or change the range of characters to be

converted.

c K

atakana and alphanumeric key

Display katakana of the entered characters or conversion

candidates (kat

akana and alphanumeric conversion candidates) of alphanumerics or symbols assigned to a touched key.

Slide to the right to display Quote apps list.

d Reverse toggle key

Display characters assigned to the same key in the inverse

order.

e Character switching key

Touch to switch the upper/lower case characters. Touch to add dakuten/handakuten.

■ Switching keyboards

Example: In Hiragana/Kanji input mode

In the character entry screen, [ ]/[Input UI]

/[QWERTY keyboard]/[12 keyboard]

: Alternatively, slide [ ] up to switch keyboards.

■ Display/Layout

In the character entry screen, [ ]/[Display / Layout]

Select an item



Keyboard layout: Make settings for the keyboard size, the

number of lines of the conversion candidates field, alignment and the key top guides. ･ If you set Align, touch [ ]/[ ] when using the 12

keyboard to move the keyboard, conversion candidates field, etc. to the left/right.



Emoji/Symbol list rows: Set the number of columns of

pictograms list/symbols list.



Key input guide: Set whether to zoom in the selected key and

to display the guide of flick input.



Software keyboard display setting: Set whether to display the

character entry screen when you connect a commercially available keyboard using the Bluetooth function etc. and enter characters.

■ Input assistance

In the character entry screen, [ ]/[Input assistance]

Select an item



Flick sensitivity: Set the sensitivity of the keyboard for when

selecting characters with flick input.



Guide display speed: Set how fast the guide is displayed

while entering characters with flick input.



Toggle input: Set whether to use the toggle input.



Sound on key press: Set whether or not to enable operation

sounds of entering characters.



Vibrate on key press: Set whether to activate the vibrator

when entering characters.



Vibration time on key press: Set how long Vibrate on key

press keeps the vibrator activated.



Voice input provider: Set where to connect when using the

voice input.



Delete key behavior: Set the operations of the delete key.



Romaji input assistance: Set to prevent unnecessary keys

from being touched when entering Japanese with romaji.



Auto cursor move: Set the speed for the cursor to

automatically move to the right side after entering characters.



Emoji/Symb/:) continuous input: Set whether to keep the

pictogram/symbol/emoticon list displayed after selecting a candidate from it.

■ Conversion

In the character entry screen, [ ]/[Other settings]

/[Conversion]

Select an item



Word prediction: Set whether to use the predictive

conversion.



Next word guess: Display relational predictive candidates

immediately after an entry is determined.

Setting character entry

[Delete key behavior]

When the cursor is on a character, delete the character. When

[Left-delete (Backspace)] is set and the cursor is at the beginning of a text, you can delete characters on the right side of the cursor. When [Right-delete (Clear)] is set and the cursor is at the end of a text, you can delete characters on the left side of the cursor.

Before Using the Handset

Wildcard prediction: Set whether to use the wildcard

prediction.



Typing error correction: Set Typing error correction.



Beginning prediction for mail: Display text candidates to use

at the beginning of a message when entering the message for a mail.



Internet conversion engine: Display conversion candidates

by using a conversion engine on the Internet.



Auto capitalization: In half-width alphabet entry, enter an

initial character at the head of a text with upper case one.



Auto space input: In half-width alphabet entry, automatically

insert a half-width space after selecting an English word.

■ Dictionary

In the character entry screen, [ ]/[Other settings]

/[Dictionary]

Select an item



User dictionary: Edit words in the user dictionary.



Download dictionary: Register/Cancel/Delete downloaded

dictionaries.



Update conversion dictionary: Update or download

conversion dictionaries.



Contacts name collaboration: Add name data of the

phonebook to the dictionary or reset the name data in the dictionary.

■ Slide operation

In the character entry screen, [ ]/[Other settings]

/[Slide operation]

Select an item



Upward slide: Set the operations available when you slide

the keyboard from its bottom to top.



Downward slide: Set the operations available when you slide

the keyboard from its top to bottom.



Rightward slide: Set the operations available when you slide

the keyboard from its left edge to right edge.



Leftward slide: Set the operations available when you slide

the keyboard from its right edge to left edge.

■ Reset

In the character entry screen, [ ]/[Other settings]/[Reset]

Select an item



Set the default settings: Reset the settings of S-Shoin.



Clear learning dictionary: Reset the learning dictionary.



Reset facemark list: Reset the contents of the emoticon list.

Example: When entering “文字”

In the character entry screen, enter “”

1 Enlarge/Reduce

Enlarge/Reduce the conversion candidates field.

2 Conversion candidates field

Displayed when [Word prediction] is enabled. Touch one of conversion candidates to enter. If you set an Internet conversion engine, [Net conv] is

displayed. Touch it to display conversion candidates searched by the conversion engine on the Internet.

[Convert]

In the conversion candidates field, select “文字”

1 Range reduction/Range enlargement

Reduce/Enlarge the range of characters to convert. Displayed only when available.

2 Close

Close the conversion candidates field.

3 Conversion candidates field

Touch one of conversion candidates to enter. If you set an Internet conversion engine, [Net conv] is

displayed. Touch it to display conversion candidates searched by the conversion engine on the Internet.

4 Determine

Determine the conversion.

5 Predictive candidates

Predictive candidates are displayed.

6 Conversion candidates

Conversion candidates are displayed.

7 Katakana and alphanumeric

Katakana and alphanumeric conversion candidates are

displayed.

[Auto capitalization]

This function may not follow the setting depending on the app in

use.

Entering characters

Before Using the Handset

■ Wildcard prediction

Conversion candidates are predicted according to the number of the entered characters and appear.

Enable [Wildcard prediction] in advance (>P. 23 “Conversion”). This function is available in the Hiragana/Kanji input mode and

the Half Alphabet input mode.

Example: When entering “ン”

In the character entry screen, enter “あ”

[]/[]/[]

: Each time you touch [ ], [+] is entered and the predictive

candidates appear according to the number of characters.

In the conversion candidates field, select “

ン”

■ Inputting with kuten codes

You can use four-digit kuten codes assigned to each character for entering kanji, hiragana, katakana, symbol, alphanumeric characters, etc.

In the character entry screen, slide the input mode switching key up

/[Character Code]

Input a kuten code

: After the fourth digit is entered, the corresponding character

appears.

: After the fourth digit is entered, the input mode is switched to

the previous one.

■ Inputting with voices

You can enter characters with voices.

In the character entry screen, [ ]/[Input UI]/[Voice Input]

: Alternatively, slide [ ] to the right while the QWERTY

keyboard is used or slide [ ] down while the 12 keyboard is used to switch to the voice input.

Speak at the microphone

■ Editing characters

You can perform operations such as cutting, copying or pasting by selecting the entered characters.

Touch and hold the entered characters

Edit the characters

: Drag [ ]/[ ] and specify the selection range to operate

such as cut, copy or paste of characters. Touch [SELECT ALL] to select all the entered characters.

: Touch [CLIPBOARD] to display the history of cut and copied

characters. Select characters to paste them. ･ To display the list of cut or copied characters: [ ]

[Quote apps]/[Copy History SH]

: Touch [SHARE] to use selected characters in other apps. : If there are menus which are not displayed, [ ] is displayed.

Touch it to display the menus.

In the home screen, display the Apps Sheet/ [設定] (Settings)/[言語入力] (Language &

input)

/[言語] (Language)/[English]

When you turn the power on for the first time, the initial settings screen is displayed. Follow the instructions on the screen and set.

The following items can be set. However, items to be displayed

may differ depending on the Google account settings.

Language setting Wi-Fi settings (>P. 26 “Wi-Fi settings”) Copy your Google accounts etc. from your other device (Tap &

Go)

Google account settings (>P. 27 “Setting up Google account

etc.”)

Owner's name of the handset Google services Set up payment info Add a mail address other than Google account Protect your phone Get your apps & data

■ Initial settings for docomo service

When the initial settings screen for docomo service is displayed, [Agree to all]/[Start settings]

Make the initial settings

: The following items can be set.

d ACCOUNT docomo cloud docomo apps password docomo location information Remote Initialization Service

Install all apps * This is not displayed when you have not set a docomo

apps password.

[Start using]

In the following cases, the voice input may not work properly.

When the voice is too loud When the surrounding noise is big When the phonation is not clear When the phonation is not natural When the pronunciation is too fast When any key is pressed or the microphone is touched

Up to 10 history items of cut and copied characters can be

saved.

If the number of history items of cut and copied characters

exceeds the maximum number to be saved, they are deleted from the oldest one.

Displayed icons or operation methods may differ depending on

the apps to use.

Changing screen display to English

Initial settings

Before Using the Handset

An access point (sp-mode) for Internet connection is registered by default. You can add other access points and change them if necessary. For details on sp-mode, refer to the DOCOMO website.

(https://www.nttdocomo.co.jp/service/spmode/) (in Japanese

only) If you use mopera U or Business mopera Internet, add an access point of either provider manually. For details on mopera U, refer to the mopera U website.

(https://www.mopera.net/) (in Japanese only)

■ Checking an access point in use

In the home screen, display the Apps Sheet/ [Settings]/[More]/[Cellular networks]/ [Access Point Names]

■ Setting additional access points

Never set the MCC to a figure other than 440 or the MNC to a

figure other than 10. Otherwise the added access point disappears from the screen.

In the home screen, display the Apps Sheet/ [Settings]/[More]/[Cellular networks]/ [Access Point Names]/[]

[Name]/enter the name of the network profile to create

/[OK]

[APN]/enter the access point name/[OK]

Enter other items required by network operators

/[]/[Save]

Reset an access point to default setting.

In the home screen, display the Apps Sheet/ [Settings]/[More]/[Cellular networks]/ [Access Point Names]

[]/[Reset to default]

If you use Wi-Fi function of the handset, you can use mail or Internet by connecting to access points of your home, corporate network or public wireless LAN service.

Packet communication is also available while [Wi-Fi] is set to On.

Wi-Fi connection is prioritized while Wi-Fi connection is set, but the connection is automatically switched to that of LTE/3G/GPRS network once Wi-Fi connection is terminated. Note that packet communication charges may be incurred in this case.

Refer to the manual of your wireless LAN base unit when using

the access point at home etc.

Operate access point registration near the access point. If you use the docomo service by using Wi-Fi function, set

d ACCOUNT in advance. In the home screen, display the Apps Sheet

/[Settings]/[docomo service/cloud]/[d ACCOUNT

setting] to set it.

In the home screen, display the Apps Sheet/ [Settings]/[Wi-Fi]

Set to On

Select an access point

: If you select an access point protected by security, enter the

password (security key) and select [CONNECT].

: To register access points manually: [ ]

/[Add network]/

enter the network name/set security/[SAVE]

: WPS compatible access points can be easily registered. In

the home screen, display the Apps Sheet

/[Settings]/

[Wi-Fi]/[]/[Easy Settings]/[WPS Push Button]/[WPS Pin Entry] to register an access point.

Setting an access point

If the settings of MCC and MNC are changed and the added

access point disappears from the screen, reset the settings or set the access point manually.

Resetting an access point

When sp-mode is not subscribed or if you fail to make

automatic setting of an access point due to signal status such as outside the service area, you are required to set the access point again manually.

Wi-Fi settings

Radio interference with Bluetooth devices

Wireless LANs (IEEE 802.11b/g/n) use the same frequency

band (2.4 GHz) as Bluetooth devices. Therefore, using the wireless LAN device near a Bluetooth device may cause radio interference, lowering of communication speed, noise or connection failure. In this case, turn off the Bluetooth device or keep the handset and the wireless LAN device at least approximately 10 m away from the Bluetooth device.

When you select an access point and connect to it with a wrong

password (security key), [IP Configuration Failure], [WiFi Connection Failure] or [Authentication problem] is displayed. Confirm the password (security key). When [IP Configuration Failure] is displayed after entering the correct password (security key), you may not have acquired the correct IP address. Connect to the access point again after confirming signal status.

The registration process using WPS takes a few minutes. After

completion of the registration of the access point, check that the proper connection to the access point is acquired.

As for the manual registration of an access point, this function

supports WEP, WPA/WPA2 PSK and 802.1xEAP as the security setting.

If you connect to an access point which is not connected to the

Internet, [ ] is displayed and the communication may be made by mobile networks, not Wi-Fi connection. To make Wi-Fi communication by using such an access point, enable [Using this AP without internet connection] of Advanced options before connecting to the access point.

Before Using the Handset

■ Detailed settings

In the home screen, display the Apps Sheet/ [Settings]/[Wi-Fi]

[]/[Advanced]

Select an item



Network notification: Set whether to display a notification

icon when an open network is detected. ･ Set it after setting [Wi-Fi] to On.



Wi-Fi sleep policy: Set whether to disconnect Wi-Fi when the

display is turned off.



Avoid poor connections: Set whether to use the Wi-Fi

function only when stable Internet connections are available.



Handover: Set whether to automatically switch access points

to use if you use the handset while moving.



Install certificates: Install certificates.



Wi-Fi Direct: Make settings for Wi-Fi Direct.



Passpoint: Set whether to automatically connect to the

available Passpoint compatible access points when [Wi-Fi] is set to On.



MAC address: Confirm the MAC address.



IP address: Confirm the IP address.

■ Disconnecting

In the home screen, display the Apps Sheet/ [Settings]/[Wi-Fi]

Select the connected access point/ [DISCONNECT]

: Disconnect with the password retained. The access point

may be automatically connected again such as when the display is turned on.

You can use the tethering function that connects Wi-Fi compatible devices, or PCs etc. connected via Micro USB Cable 01 (sold separately) or Bluetooth communication to the Internet by using the handset as an access point.

You can connect up to 15 devices in total at the same time: a PC

connected via Micro USB Cable 01, 10 Wi-Fi compatible devices and four Bluetooth devices.

The handset supports dial-up connections via DUN profile. Before using Bluetooth tethering, register the other party's

Bluetooth device in advance (>P. 84 “Using Bluetooth function”). As for the settings on the Bluetooth device, refer to its manual.

In the home screen, display the Apps Sheet/ [Settings]/[More]/[Tethering]

Select an item



USB tethering: Set whether to use the USB tethering.



Wi-Fi tethering: Set whether to use the Wi-Fi tethering.



Set up Wi-Fi hotspot: Make settings for Wi-Fi tethering such

as network name and security.



Wi-Fi tethering Easy Connection: Set whether to use the

tethering by connecting to WPS compatible access points.



Bluetooth tethering: Set whether to use the Bluetooth

tethering.

In the home screen, display the Apps Sheet/ select “Communication” folder/[Email]

: Only when an account is not set up, the account setup

screen appears.

Enter mail address/[]

Enter password/[]

: Provider information is preset for some mail accounts, and a

receiving mail server and a sending mail server are automatically set.

: When you use an account whose provider information is not

preset, it is necessary to set a receiving mail server and a sending mail server manually. For details on those settings, contact the Internet service provider you use.

Set up an account/[]

Enter an account name and your name/[]

You can use Google services such as Gmail and Google Play if

you set up Google account.

In the home screen, display the Apps Sheet/ [Settings]/[Accounts]/[Add account]

Select an account type

Set up an account

: In the home screen, display the Apps Sheet

/[Settings]/

[Accounts] to find the added account on the displayed menu.

■ Deleting your account

In the home screen, display the Apps Sheet/ [Settings]/[Accounts]

Select an account/[]/[Remove account]/ [REMOVE ACCOUNT]

: Operation methods may differ depending on the account.

■ Retrieving your Google account password

If you forget your Google account password, retrieve it.

In the home screen, display the Apps Sheet/ select “Google” folder/[Chrome]

Enter “(https://www.google.com/ncr) ” in the URL entry field/[Go]/[Sign in]

Tethering

[USB tethering]

The tethering function is available when OS of PCs is Windows

Vista, Windows 7, Windows 8.1, Windows 10 or Linux.

A microSD Card inserted in the handset cannot be mounted on

a PC during USB tethering.

For details on USB tethering, refer to the following website.

(http://www.android.com/tether#usb)

[Wi-Fi tethering]

While the handset is functioning as an access point, it cannot

access the Internet via Wi-Fi connection.

Make settings for Wi-Fi access points in [Set up Wi-Fi hotspot].

For details on Wi-Fi tethering, refer to the following website.

(http://www.android.com/tether#wifi)

[Set up Wi-Fi hotspot]

At the time of purchase, Network name is set to [DM-01J_AP]

and Security is set to [WPA2 PSK] while Password is set randomly. Change the settings if necessary.

Setting up mail account

Setting up Google account etc.

When activating the app that requires an account without

setting one up, the account setup screen appears.

Keep a separate memo of the set account and password.

Before Using the Handset

Enter mail address/[Next]/[Forgot password?]

/follow the instructions on the

screen and operate

: Operation methods may differ depending on the using

conditions.

■ Synchronizing data

You can synchronize data between the handset and online services. You can access the same personal information as those stored in online services from the handset and PC, and you can use and update data by synchronizing them.

When synchronizing automatically

Set whether to automatically synchronize items set in each account.

In the home screen, display the Apps Sheet/ [Settings]/[Accounts]

: To set items to synchronize: Select an account type

/select

an account

/select an item

[]/[Auto-sync data]/[OK]

When synchronizing manually

When Auto-sync data is disabled, you can synchronize selected

items manually.

In the home screen, display the Apps Sheet/ [Settings]/[Accounts]

Select an account type/select an account

Select items to be synchronized

■ Importing from docomo nano UIM card

In the home screen, display the Apps Sheet/ [docomo phonebook]/[Contacts]

[]/[SD card/SIM card/common]

[Restore from SIM card]

: If there are multiple accounts, the screen for selecting to

which account to register is displayed.

Select the contact to import

: To import all contacts: [ ]

/[Import all]

■ Importing from/Exporting to microSD Card

In the home screen, display the Apps Sheet/ [docomo phonebook]/[Contacts]

[]/[SD card/SIM card/common]

[Activate docomo backup app]

: docomo Data Copy is activated. For details on backing up/

restoring the phonebook by using docomo Data Copy >P. 66 “Backing up to/Restoring from a microSD Card”

The incoming/charging illumination notifies you that there is a missed call, the handset is being charged, etc. by illuminating/ flashing.

For details on the setting of when to make it flash or how to make

it flash and the flashing pattern/color for when receiving a call >P. 69 “Illumination”

Icons displayed on the status bar at the top of the screen give you various kinds of information, such as the status of the handset or the presence of missed calls. You can check the detailed information by displaying the status panel.

Two kinds of icons are displayed.

Notification icon: Notifies you of missed calls, new mails, etc. Status icon: Display the status of the handset such as the

battery level or the signal status.

■ Main notification icon list

the phonebook of the handset memory with contacts on the online services even if you synchronize with an account other than Google account.

Importing/Exporting phonebook

Incoming/Charging illumination

State of lamp Color State of handset

Illuminating Ruby (Red) Charging in progress (Battery

level is approx. 94% or less)

Illuminating Emerald (Green) Charging in progress (Battery

level is approx. 95% or more)

Flashing Ruby (Red) Charging unavailable

Flashing Prism (White) Call missed/New mail received

Flashing Sapphire (Blue) New docomo mail received

When the display is on, the incoming illumination which notifies

you of missed calls, new mails and new docomo mails does not flash. Check them with notification icons. When notification icons do not appear since you play videos with Media Player etc., check them on a screen with the status bar appearing.

Screen display/Icons

Viewing icons

: Missed call (>P. 42 “Outgoing/Incoming call history”) : New SMS (>P. 47 “SMS”)

: New mail (>P. 48 “Email”) : New Gmail (>P. 49 “Gmail”) : New Area Mail (>P. 51 “Early Warning “Area Mail””)

: Error

Displayed when an error has occurred.

: Authentication of d ACCOUNT failed (>P. 74 “docomo

service/cloud”)

: Data communication disabled (>P. 73 “Data usage”)

Displayed when a data communication limit has been reached.

: Alarm information (>P. 62 “Alarm”)

: Schedule notification from Calendar : Playing music with Media Player (>P. 60 “Media Player”)

Call (>P. 39 “Call”)

: Making a call/Receiving a call/Talking on the handset : Putting a call on hold

: Answering memo (>P. 42 “Voice/Answering memo”) : Voice mail message (>P. 43 “Network service”)

: microSD Card (>P. 73 “Storage & USB”)

Status bar

Status iconNotification icon

+ 80 hidden pages

Docomo DM-01J Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Checking operation method

Basic package

Contents/Precautions

Contents

Using the handset

Precautions (ALWAYS FOLLOW THESE DIRECTIONS)

Handling precautions

Waterproof/Dustproof

Before Using the Handset

Part names and functions

docomo nano UIM card

Charging

Turning power on/off

Disney original cover

Basic operation

Character entry

Changing screen display to English

Initial settings

Incoming/Charging illumination

Screen display/Icons