Docomo Ascend HW-03E Instruction Manual
INSTRUCTION MANUAL ’
13.03
HW-03E
0
Introduction
Thank you for purchasing "HW-03E" mobile terminal.
Before using your terminal, or when necessary, read this manual to ensure
safe use and handling.
Operations of HW-03E are described in the followings.
■ "Quick Start Guide" (included accessory) (in Japanese
only)
This manual provides information about operations and screens of basic
functions.
■ "取扱説明書 (Instruction manual)" (application in the
terminal) (in Japanese only)
This manual provides detail information about functions, operations,
screens, etc.
Ta p " Ascendアプリ (Ascend application)" from the Application screen
(P.58) → "取扱説明書 (Instruction manual)" to activate.
･ For the first activation, follow onscreen instructions to download and install
the application.
Because data of the application is large, a high packet communication fee
will be applied for downloading. Subscription of packet flat-rate service is
highly recommended.
■ "Instruction manual" (PDF file)
This manual provides detail information about functions, operations,
screens, etc.
Download from the following NTT DOCOMO website.
http://www.nttdocomo.co.jp/english/support/trouble/manual/download/
index.html
* The latest information of "Quick Start Guide" (Japanese) is availabl
e. The
URL and contents are subject to change without prior notice.
Learning operations
■ スマホなるほどツアーズ for docomo with series (Widget
in the terminal) (Tips of smartphone for docomo with
series) (In Japanese only)
It is a widget with which you can learn useful functions and basic
operations you should know in a joyful way with Docomodake.
From the Home screen (P.53), tap .
1
In this manual, consecutive operation steps for menu operation etc. are
simplified as follows.
<Example: Operation steps when operating an icon on the Home screen
and then selecting an application, menu item, etc. consecutively>
a Icon without name
b Selection item with name such as icon or menu
c Key (P.18)
Information
･ In this manual, "HW-03E" mobile terminal is usually referred to as "the
terminal". Please be forewarned.
･ Operation steps and screens are mainly described for the terminal in the
default state. They may vary by adding/changing the applications, services,
etc.
･ The images or illustration used in this manual are examples. They may differ
from the actual product or screen.
･ In this manual, explanations and screens for docomo Palette UI as Home
application are provided.
･ For several ways of operating functions or settings, it is explained with the
simple one.
･ Registration methods or operations of application in this manual are subject
to change by registration destination or update of application without prior
notice.
･ The contents in this manual, URL and contents are subject to change without
prior notice.
Operation steps
1 From the Home screen, → "Phonebook"
2 M → "Others" → "Import/Export"
a
b
c
2
Contents/Precautions
Basic package
■ HW-03E terminal (including warranty) ■ Back Cover HW06 ■ Quick Start Guide (in Japanese only)
■ Battery Pack HW03 ■ microSDHC card (4GB)
(Sample)
3
Contents/Precautions
v
Contents
■ Basic package.................................. 2
■ Before using the terminal ................. 5
■ Precautions (Always follow these
directions) ............................................ 6
■ Handling precautions.........................13
Part names and functions .................................. 18
docomo mini UIM card ...................................... 20
microSD card ..................................................... 21
Battery pack ....................................................... 22
Charging ............................................................ 24
Turning power ON/OFF ...................................... 27
Basic operation .................................................. 28
Initial settings ..................................................... 30
Screen/Icon ........................................................ 31
Character entry .................................................. 36
Home screen ...................................................... 53
Managing the Home screen .............................. 54
Application screen ............................................. 58
Managing applications ...................................... 63
Managing groups ............................................... 64
Searching applications ...................................... 65
Switching display of Application screen ............ 65
Installing "Recommends" applications ............... 65
Home application information ............................ 65
Making a call ......................................................66
Receiving a call .................................................. 69
Operations during a call .....................................69
Call history ..........................................................70
Call settings ........................................................71
Phonebook .........................................................73
sp-mode mail ......................................................78
Message (SMS) .................................................. 78
Email ...................................................................80
Gmail ..................................................................83
Google Talk .........................................................84
Early warning "Area Mail" .................................... 84
Web browser ......................................................85
Setting menu ......................................................91
WIRELESS & NETWORKS .................................. 91
DEVICE ...............................................................98
PERSONAL .......................................................103
SYSTEM ............................................................110
File Manager ..................................................... 113
Bluetooth communication .................................115
Connecting external device .............................117
dmenu .............................................................. 120
dmarket ............................................................ 120
Play Store ......................................................... 121
Osaifu-Keitai .................................................... 121
Mobacas .......................................................... 124
1Seg ................................................................. 127
Camera ............................................................ 133
Gallery .............................................................. 137
Media Player .................................................... 141
YouTube ........................................................... 143
GPS/Navigation ................................................ 144
Clock ................................................................ 148
Calendar .......................................................... 150
Memo ............................................................... 154
Calculator ......................................................... 154
SD card backup ............................................... 155
Movie Studio .................................................... 157
Polaris Office .................................................... 159
Outline of international roaming (WORLD WING)
.................................................................... 160
Available service overseas .............................. 160
Checking for using ........................................... 161
Making settings for overseas use .................... 162
Making/Receiving a call in the country you stay
.................................................................... 163
Making settings for international roaming ........ 165
After returning to Japan ................................... 166
Before using the terminal
docomo Palette UI
Calling
Mail/Browser
Settings
File management
Application
International roaming
4
Contents/Precautions
Options and related devices ........................... 167
Troubleshooting (FAQ) ..................................... 168
Smartphone Anshin Remote Support .............. 174
Warranty and After-Sales Service .................... 174
Software update ............................................... 176
Main specifications .......................................... 180
Specific Absorption Rate (SAR) of Mobile Phones
..................................................................... 182
Operating Environment .................................... 183
Certification Information (SAR) ........................ 183
FCC Statement ................................................. 184
Disposal and Recycling Information ................ 184
Reduction of Hazardous Substances ..............185
EU Regulatory Conformance ........................... 185
Software complying with GPL/LGPL ................ 186
Export Controls and Regulations ..................... 186
Intellectual Property Right ................................ 187
SIM unlock ....................................................... 188
Index ................................................................ 189
Appendix/Index
5
Contents/Precautions
Before using the terminal
･ This terminal supports LTE, W-CDMA, GSM/GPRS, Wireless LAN System.
･ Because your terminal uses wireless transmission, it may not function in
locations where it is difficult for radio waves to penetrate, such as tunnels,
underground passages and some buildings, in areas where radio waves are
weak, or out of Xi and FOMA service area. Even when you are high up in a
tall building or condominium and nothing blocks your view outside, your
terminal may not be able to receive or transmit signals. Also, communication
may be interrupted even when there are strong radio waves with 4-antenna
mark on the terminal and you are not moving (traveling).
･ Because your terminal uses radio waves to communicate, it is possible that
a third party may attempt to tap your calls. However, the LTE, W-CDMA, GSM/
GPRS automatically applies a confidential communication function to all
calls, so even if a third party could somehow tap a call, they only hear noise.
･ Your terminal encodes voice communication as digital data. When you are
operating your terminal while moving to a location subject to weaker radio
wave conditions, the transmitted digital data may not be correctly decoded
and as a result the decoded voice may differ somewhat from the actual voice.
･ This terminal supports Xi Area, FOMA Plus-Area and FOMA HIGH-SPEED
Area.
･ Maintain a separate record of the data you saved (Phonebook etc.) in the
terminal. Note that DOCOMO assumes no responsibility for any loss of saved
contents of data resulting from malfunction, repair, changing of the model or
other handling of the terminal.
･ You are recommended to save important data to microSD card.
･ In the terminal, as it is for a PC, some applications that you install may give
instability of the operation of your terminal, or may send location information
or personal information registered to the terminal to outside via the Internet
and the information may be used improperly. Please thoroughly check a
provider and operation status of the application etc. which you want to use
beforehand and then use it.
･ Depending on applications or services, packet communication charges may
be applied even if you set data communication to be disabled.
･ The terminal does not support i-mode sites (programs) or i-Dppli.
･ The terminal automatically performs communication for some functions, for
example, to synchronize data, check the latest software or maintain
connection with the server. If you transmit a large amount of data such as
downloading applications or watching video, a packet communication
charge becomes high. Subscription of packet flat-rate service is highly
recommended.
･ Depending on applications or services, packet communication charges may
be applied even while you use Wi-Fi connection.
･ Note that, even when Silent mode is set, shutter sound or start/end shooting
sound of the camera, playback sound of music/video or alarm sound are
emitted.
･ Update for improving the terminal's quality or upgrading the operation
system (OS) may be performed. And some applications used in the previous
version of OS may not be available or some unintended bugs may occur after
upgrading.
･ Set the screen lock to ensure the security of your terminal for its loss (P.107).
･ Mobacas is a service linking communication. For use of service, packet
communication charge is applied. You are recommended to subscribe to
packet flat-rate service.
･ For the information on the services provided by Google, refer to the terms of
use for Google Inc. And for the details on other web services, read terms of
use for each service.
･ You can use the terminal only with docomo mini UIM card. If you have a UIM
or FOMA card, bring it to a docomo Shop to replace.
･ If your terminal is lost, change your each account password using a PC to
prevent other persons from using Google services such as Google Talk,
Gmail, Google Play, etc. and Twitter.
･ The terminal supports only sp-mode, mopera U and Business mopera
Internet. Other providers are not supported.
･ To use tethering, a subscription to sp-mode is required.
･ Packet communication charge when using tethering varies depending on the
charging plan you use. Subscription of packet flat-rate service is highly
recommended.
･ For details on usage fee, refer to http://www.nttdocomo.co.jp/english/.
6
Contents/Precautions
Precautions (Always follow these directions)
■ Before using your terminal, or when necessary, read the precautions
below to ensure safe use and handling. After reading this manual, keep
it carefully.
■ These precautions are intended to protect you and others around you.
Read and follow them carefully to avoid injury, damage to the product or
damage to property.
■ The signs below differentiate between the levels of danger that can
occur if the product is not used within the specified guidelines.
■ The symbols below show specific directions.
■ Precautions contain the description below.
1. Handling the terminal, battery pack, adapter and docomo mini UIM card
(common) ................................................................................................. P.7
2. Handling the terminal............................................................................ P.8
3. Handling battery pack ........................................................................ P.10
4. Handling adapter................................................................................ P.11
5. Handling docomo mini UIM card........................................................ P.12
6. Handling mobile phones near electronic medical equipment............ P.12
7. Material list .......................................................................................... P.13
DANGER
This sign denotes that death or serious injury may
directly result from improper use.
WARNING
This sign denotes that death or serious injury may result
from improper use.
CAUTION
This sign denotes that minor injury or damage to
property may result from improper use.
This symbol denotes that the action is prohibited.
Don’t
This symbol denotes that disassembling the phone or
its components is not allowed.
This symbol denotes that using the phone or its
components in a bathroom or other highly humid area
is not allowed.
This symbol denotes that using the phone or its
components with wet hands is not allowed.
This symbol denotes that an instruction must be
obeyed at all times.
This symbol denotes that the equipment should be
unplugged.
No
disassembly
No liquids
No wet
hands
Do
Unplug
7
Contents/Precautions
DANGER
Do not use, store or leave the terminal in hot places (e.g. by
the fire, near a heater, under a kotatsu, in direct sunlight, in
a car in the hot sun).
May cause fire, burns or injuries.
Do not put the terminal into heating cooking device such as
microwave oven or high-pressure container.
May cause fire, burns, injuries, electric shock.
Do not disassemble or remodel the equipment.
May cause fire, burns, injuries, electric shock.
Do not let the terminal get wet with water, drinking water,
urine of pet animals, etc.
May cause fire, burns, injuries, electric shock.
Use the battery pack and adapter specified by NTT
DOCOMO for your terminal.
May cause fire, burns, injuries, electric shock.
WARNING
Do not throw the equipment or give a strong force or hard
shock to it.
May cause fire, burns, injuries, electric shock.
Keep conductive materials (metal pieces, pencil lead, etc.)
from coming in contact with the charging jack or external
connection jack. Do not put those materials inside the
terminal.
May cause fire, burns, injuries, electric shock.
Do not cover or wrap the terminal with a blanket, etc while
using or charging.
May cause fire or burns.
Turn the terminal OFF and stop charging before entering a
place such as a gas station where flammable gases are
generated.
The gas may catch fire.
When using Osaifu-Keitai in a place as a gas station, turn OFF
the terminal before using it (When Osaifu-Keitai lock is
activated, deactivate it before turning OFF the terminal.)
If the equipment gives off a strange smell, overheats,
becomes discolored or deformed during use, charging or in
storage, immediately perform the following operations.
･ Remove the power plug from the wall outlet or cigarette
lighter socket.
･ Turn the terminal OFF.
･ Remove the battery pack from the terminal.
May cause fire, burns, injuries, electric shock.
1. Handling the terminal, battery pack, adapter and
docomo mini UIM card (common)
Don’t
Don’t
No
disassembly
No liquids
Do
Don’t
Don’t
Don’t
Do
Do
8
Contents/Precautions
CAUTION
Do not leave the equipment on unstable or sloping surfaces.
The terminal may fall and cause injuries.
Do not store the equipment in extremely humid, dusty or hot
areas.
May cause fire, burns, electric shock.
Children using the equipment should be instructed in
proper operation by an adult. Do not allow them to use the
equipment without adult supervision.
May cause injuries.
Store the equipment out of reach of small children.
May be accidentally swallowed or cause injuries.
Be careful especially when using the terminal connected to
the adapter continuously for a long time.
If you watch 1Seg etc. while charging the battery for a long time,
the terminal, battery pack and adapter may be heated.
Directly touching a hot part for a long time, you may have
redness, itching or rash on your skin, or it may result in lowtemperature burns depending on your constitution and/or health
condition.
WARNING
Do not turn on the light by getting the lighting part closer to
other person's eyes. When shooting infants, keep at least
1 m away from the object.
May impair eyesight. And may cause accidents like injury etc.,
by dazzling or astounding other people.
Do not put foreign objects such as liquid like water, metal
pieces or burnable things into mini UIM card slot or microSD
card slot.
May cause fire, burns, injuries, electric shock.
Do not turn on the light aiming directly at the driver of the
car etc.
May disturb driving and cause an accident.
Turn the terminal OFF in areas where use is prohibited, such
as in airplanes and hospitals.
May cause electronic equipment or electronic medical
equipment to fail or malfunction. When using the phone in a
medical facility, be sure to observe the regulations of the facility.
If you do prohibited act such as using the phone in an airplane,
you will be punished according to law. If usage of the terminal in
an aircraft is admitted by setting airplane mode, etc., use the
terminal under the direction of the airline.
Don’t
Don’t
Do
Do
Do
2. Handling the terminal
Don’t
Don’t
Don’t
Do
9
Contents/Precautions
When you talk by setting handsfree or ring alert is sounding,
keep the terminal away from your ear.
And, when connecting the earphone/microphone etc. to the
terminal and play a game or music, adjust the volume to a
moderate level.
Too loud volume may cause a hearing loss. And, if you cannot
hear the sound around you clearly, it may cause an accident.
If you have weak heart, be careful when setting the vibrate
alert (vibration) or alert volume setting.
May cause harmful effect on heart.
When you use electronic medical equipment, check with the
equipment manufacturer to determine how the device is
affected by radio waves before using.
May cause harmful effect on electronic medical equipment etc.
Turn the terminal OFF near high-precision electronic control
equipment or electronic equipment using low-power
signals.
May cause the equipment to fail or malfunction.
* Examples of electronic equipment to avoid
Hearing aids, implanted pacemakers or defibrillators, other
electronic medical equipment, fire alarms, automatic doors and
other automatic control equipment. Users wearing implanted
pacemakers or defibrillators or other electronic medical
equipment should check with the manufacturer or sales outlet
about the effect of radio frequencies on the equipment.
When the display or lens of the camera is accidentally
broken, be careful of broken glass or exposed internal parts
of the terminal.
If you mistakenly touch broken or exposed parts, you may be
injured.
CAUTION
Do not swing the terminal by the antenna, strap, etc.
May cause accident such as injury to yourself or others by
hitting.
Do not use the damaged terminal.
May cause fire, burns, injuries, electric shock.
When using the motion sensor, check the safety around you,
hold the terminal firmly, and do not shake it unnecessarily.
May cause accident such as injuries.
If the display part is accidentally broken and the liquid
crystal leaks out, do not make the substance contact with
your skin of face or hands.
May cause loss of sight or skin problems. If the liquid crystal
gets into your eyes or mouth, rinse it with clean water and see a
doctor immediately. And, if the liquid adheres to skin or clothing,
use alcohol etc. to wipe it off, then wash with soap.
To use the terminal in car, check with automobile
manufacturer or dealer to determine how the device is
affected by radio waves before using.
In rare cases, using the phone in some vehicle models can
cause the vehicle's electronic equipment to malfunction. In that
case, stop using the terminal immediately.
The use of the terminal may cause itching, rashes, eczema,
or other symptoms depending on the user's physical
condition. If you develop skin problems, stop using the
phone immediately, and see a doctor.
For materials of parts →P.13 "Material list"
Do
Do
Do
Do
Do
Don’t
Don’t
Don’t
Don’t
Do
Do
10
Contents/Precautions
When watching the display, take a certain distance from the
display in a fully bright place.
May reduce visual acuity.
■ Check that the battery type matches the type displayed on the battery
pack label.
DANGER
Do not connect a wire or other metal objects to the jack.
And, do not carry or store the terminal with objects like a
metal necklace.
May cause battery pack to ignite, burst, heat or leak.
Check the orientation of the battery pack to attach to the
terminal, and do not try to force the battery pack onto the
terminal if you are having trouble attaching it.
May cause battery pack to ignite, burst, heat or leak.
Do not throw the battery pack into the fire.
May cause battery pack to ignite, burst, heat or leak.
Do not nail the battery pack, hit with a hammer or step on it.
May cause battery pack to ignite, burst, heat or leak.
If the battery pack's fluid etc. contacts eyes, immediately
flush the eyes with clean water and see a doctor right away.
Do not rub the eyes.
May cause loss of sight.
WARNING
If the battery pack seems to have abnormalities such as
deformation or scratches due to falling, never use it.
May cause battery pack to ignite, burst, heat or leak.
If the battery pack leaks or gives off a strange smell,
immediately remove it from the vicinity of open flames.
The vapors from leaking battery pack fluid may ignite or
explode.
Be careful not to let your pet bite the battery pack.
May cause battery pack to ignite, burst, heat or leak.
CAUTION
Do not discard old battery packs together with other
garbage.
May cause igniting or environmental destruction. Tape the
terminals of old battery packs to insulate them, and then bring
them into a sales outlet such as docomo Shop. If your local
municipality has a battery recycling program, dispose of them
as provided for.
Do not use or charge a wet battery pack.
May cause battery pack to ignite, burst, heat or leak.
3. Handling battery pack
Display Battery type
Li-ion 00 Li-ion polymer battery
Do
Don’t
Don’t
Don’t
Don’t
Do
Don’t
Do
Do
Don’t
Don’t
11
Contents/Precautions
If fluid etc. leaks out from the battery pack, do not make the
fluid contact with your skin of face or hands.
May cause loss of sight or skin problems.
If the fluid etc. put into your eyes or mouth, or contacts skin or
clothes, immediately flush the contacted area with clean water.
If the fluid etc. put into the eyes or mouth, immediately see a
doctor after flushing.
WARNING
Do not use the adapter cord if it gets damaged.
May cause fire, burns, electric shock.
Do not use the AC adapter or desktop holder in a bathroom
or other highly humid area.
May cause fire, burns, electric shock.
Always use the DC adapter with a negative-ground vehicle.
Do not plug it into a positive-ground vehicle.
May cause fire, burns, electric shock.
When it starts to thunder, do not touch adapter.
May cause electric shock.
Do not short the charging jack while it is connected to the
outlet or cigarette lighter socket. Do not touch the charging
jack with a part of your body such as your hand or finger.
May cause fire, burns, electric shock.
Do not place heavy objects on the adapter cord.
May cause fire, burns, electric shock.
When you insert and remove the AC adapter from power
outlet, do not contact a metal strap or other metal objects
with the jack.
May cause fire, burns, electric shock.
Do not touch the adapter cord or outlet with wet hands.
May cause fire, burns, electric shock.
Only use with the specified power source and voltage. When
charging the terminal overseas, use AC Adapter for global
use.
If incorrect voltage is used, this may cause fire, burns or electric
shock.
AC adapter : 100 V AC
DC adapter : 12 or 24 V DC (specific for negative ground
vehicle)
AC adapter for global use : Between 100 V and 240 V AC
(Connect to the AC outlet for internal household use)
If the DC adapter's fuse blows, replace it only with the
specified fuse.
May cause fire, burns, electric shock. For the specified fuse, see
the instructions that come with the DC adapter.
Wipe off any dust that accumulates on the power plug.
May cause fire, burns, electric shock.
When you connect the AC adapter to an outlet, firmly
connect to the outlet.
May cause fire, burns, electric shock.
4. Handling adapter
Do
Don’t
Don’t
Don’t
Don’t
Don’t
Don’t
Don’t
No wet
hands
Do
Do
Do
Do
12
Contents/Precautions
When you disconnect the power plug from the outlet or
cigarette lighter socket, do not pull the adapter cord with
excessive force. Instead, hold the adapter to disconnect.
May cause fire, burns, electric shock.
Always remove the power plug from the outlet or cigarette
lighter when not using the adapter for an extended period.
May cause fire, burns, electric shock.
Immediately remove the power plug from the outlet or
cigarette lighter socket if water or other fluids get into the
adapter.
May cause fire, burns, electric shock.
Always remove the power plug from the cigarette lighter
socket when cleaning the equipment.
May cause fire, burns, electric shock.
CAUTION
Be careful of the cut surface when removing docomo mini
UIM card.
May cause injuries.
■ These precautions are based on the guidelines produced at the
Electromagnetic Compatibility Conference Japan, regarding the
protection of electronic medical equipment from radio waves emitted by
mobile phone units.
WARNING
Obey the following rules inside medical facilities.
･ Do not bring the terminal into operating rooms (ORs), intensive
care units (ICUs) or coronary care units (CCUs).
･ Turn the terminal OFF in hospital wards.
･ Turn the terminal OFF in hospital lobbies and corridors if
electronic medical equipment could be nearby.
･ If the medical facility has specified zones where use or
possession of mobile devices is prohibited, obey those
instructions.
Turn the terminal OFF in crowded trains or other public
places where pacemaker or defibrillator wearers could be
nearby.
The terminal's signals may affect the operation of implanted
pacemakers or defibrillators, and other devices.
Wearers of medical equipment such as implanted
pacemakers or defibrillators must carry and use the
terminal at least 22 cm away from the implanted device.
The terminal's signals may affect the performance of electronic
medical equipment.
When electronic medical equipment other than implanted
pacemakers or defibrillators are in use outside of medical
facilities (such as in home care settings), check with the
device manufacturer to determine how the device is affected
by electrical signals.
The terminal's signals may affect the performance of electronic
medical equipment.
5. Handling docomo mini UIM card
6. Handling mobile phones near electronic
medical equipment
Do
Unplu
g
Unplug
Unplug
Do
Do
Do
Do
Do
13
Contents/Precautions
Handlingprecautions
■ Do not get the terminal wet.
The terminal, battery pack, adapter, docomo mini UIM card are not
waterproof. Do not use in a bathroom or other highly humid area or do not let
rain touch. Or putting the terminal on your body, humidity of sweat may
cause internal corrosion and malfunction. Note that malfunctions, which are
determined to be caused by water as result of inspections, are not covered
by the warranty.
Since these conditions are outside the scope of the warranty, a repair, if at
all possible, is charged.
■ Clean the terminal with a dry soft cloth (such as a cloth for eyeglasses).
･ Rubbing it roughly with a dry cloth may scratch the display.
･ Drops of water or dirt left on the display may cause stains.
･ If the terminal is wiped with alcohol, paint thinner, benzine or detergent,
the printing may disappear or color may fade.
■ Clean the jack occasionally with a dry cotton swab etc.
If the jack is soiled, connection gets worse and it may cause power to be
turned off or insufficient battery charge, so clean the jack with a dry cotton
swab etc. Also, be careful never to damage the jack when cleaning it.
■ Do not place the terminal near an air-conditioner outlet.
The rapid change in temperature may cause condensation, causing internal
corrosion and malfunction.
■ When using, be careful not to subject excessive force to the terminal or
the battery.
If the terminal is crammed into a brimming bag or placed in a pocket and sat
on, display, internal PCBs or battery pack may be damaged or malfunction.
And, if external devices are plugged into the external connection jack, the
breakage of the connector or malfunction may result.
■ Do not rub or scrape the display with a metal piece etc.
May scratch the display, causing malfunction or damage.
7. Material list
Part Material Surface treatment
Exterior case (front)
PC resin None
Power key
PC resin None
Earpiece protection net
Stainless steel Etching
Surface
Glass None
Volume key
PC resin None
Camera Exterior panel
Aluminum None
Lens
Glass None
Flash cover
PMMA resin None
Speaker net
Stainless steel Etching
1Seg/
Mobacas
antenna
Top section
PC resin None
Rod section
Stainless steel None
Back cover
PC resin None
Charging contacts for
desktop holder
Copper Gold plating
Battery
pack
Surface (Top/
Bottom)
ABS resin + PC resin None
Printed
section
(peripheral)
PET UV coating
Contacts
FR-4 (glass epoxy
substrate)
Nickel plating + gold
plating
docomo mini UIM card
slot contacts
Stainless steel Nickel plating + gold
plating
microSD card slot
Stainless steel Nickel plating + gold
plating
General
14
Contents/Precautions
■ Carefully read the separate instructions that come with optional devices.
■ Do not press the surface of the touch panel strongly or operate it with
sharp objects such as a nail, a ballpoint pen and a pin.
It may damage the touch panel.
■ Avoid extreme temperature.
Use the terminal where the temperature ranges between 5 and 35°C and
humidity ranges between 35 and 85%.
■ The terminal may affect land-line phones, TVs or radios in use nearby,
so use it as far as possible from these appliances.
■ Maintain a separate record of the data you saved in the terminal.
If the data is deleted, DOCOMO assumes no responsibility for the loss of any
data.
■ Do not drop the terminal or subject it to shocks.
May cause malfunction or damage.
■ Do not plug external devices into the external connection jack at a slant,
or do not pull it forcibly while it is plugged.
May cause malfunction or damage.
■ It is normal for the terminal to become warm during use or charging.
Continue to use it.
■ Do not leave the terminal with the camera in areas under strong direct
sunlight.
May cause discoloring or burn-in of elements.
■ Do not use the terminal with the back cover removed.
May cause removal of battery pack, malfunction or damage.
■ While microSD card is being used, do not take the card out and do not
turn off the terminal.
May cause data loss or malfunction.
■ Do not bring magnetic cards etc. close to the terminal.
Magnetic data in cash cards, credit cards, telephone cards, floppy disks,
etc. may be erased.
■ Do not bring magnetized objects close to the terminal.
Bringing strong magnetism close may cause a malfunction.
■ The battery pack is a consumable par t.
Replace the battery pack if the terminal has extremely short operation time
on a full charge, though it may vary by operating conditions. Purchase a new
battery pack of the specified type.
■ Charge the battery in an area within the proper ambient temperature
range (5-35°C).
■ The operation time provided by the battery pack varies by the operating
environment and battery pack's deterioration.
■ The battery pack may swell out as it comes to near the end of its lifetime
depending on the usage conditions, but it is not a problem.
■ Be careful especially about the following points when preserving the
battery pack.
･ Keeping under the state of the full charge (right after charging ends)
･ Keeping under the state of the empty charge (too exhausted to turn on the
terminal)
They may cause the battery pack performance to be degraded or its lifetime
to be shortened.
A recommended battery level to keep the battery pack is approximately
40% of remaining battery level as a guide.
■ Charge the battery in an area within the proper ambient temperature
range (5-35°C).
■ Do not charge the battery in the areas below.
･ In areas of excessive humidity, dust or vibrations
･ Near land-line phones or TVs/radios
■ It is normal for the adapter to become hot while charging. Continue to
use it.
The terminal
Battery pack
Adapter
15
Contents/Precautions
■ When using the DC adapter for charging, keep the vehicle engine
running.
The vehicle's battery could become flat.
■ When using an outlet with a mechanism preventing unplugging, follow
the handling instructions for that outlet.
■ Do not give strong shock. Do not deform the external connection jack.
May cause malfunction.
■ Do not use excessive force to install/remove docomo mini UIM card.
■ Note that DOCOMO assumes no responsibility for malfunctions
occurring as the result of inser ting and using docomo mini UIM card with
another IC card reader/writer.
■ Always keep UIM ICs clean.
■ Clean docomo mini UIM card with a soft, dry cloth (such as a cloth for
eyeglasses).
■ Maintain a separate record of the data you saved in docomo mini UIM
card.
If the data is deleted, DOCOMO assumes no responsibility for the loss of any
data.
■ To preserve the environment, bring the old docomo mini UIM card to a
sales outlet such as docomo Shop.
■ Take care not to scratch, touch accidentally or short IC.
May cause data loss or malfunction.
■ Do not drop docomo mini UIM card or subject it to shocks.
May cause malfunction.
■ Do not bend docomo mini UIM card or place heavy objects on it.
May cause malfunction.
■ Do not install docomo mini UIM card into the terminal with a label or
sticker put on.
May cause malfunction.
■ This terminal is equipped with the security features,
that are compliant with Bluetooth standards for communication via
Bluetooth. However, depending on the settings, there may not be
enough security. Be aware of security risks when using Bluetooth.
■ DOCOMO assumes no responsibility for any information which may be
leaked during communication via Bluetooth.
■ Frequency bands
Frequency bands, modulation, and expected interference distance or
changeability of frequency used by the terminal Bluetooth/Wireless LAN
function are as below. Symbols indicate as follows.
2.4 : Radio equipment that uses the frequency 2400 MHz band.
FH1 : The Bluetooth modulation is FH-SS and expected interference
distance is 10 m or shorter.
DS4/OF4 : The Wireless LAN modulation is DS-SS, OFDM and
expected interference distance is 40 m or shorter.
: All bandwidths between 2400 MHz and 2483.5 MHz
are used, and the bandwidth used by mobile object
identification devices can be avoided.
･ Available channel varies by countries.
･ To use in airplane, confirm with airline company in advance.
■ Cautions on using Bluetooth devices
In the bandwidth used by this terminal, in addition to home electric
appliances such as a microwave oven and industrial/scientific/medical
devices, in-plant radio stations used to identify mobile objects used in
production lines of a factory that require a license, specified low power
radio stations, or amateur radio stations that do not require a license
docomo mini UIM card
Bluetooth® devices
16
Contents/Precautions
(hereafter "other radio stations") can be in operation.
1. Before using this terminal, check whether other radio stations are in
operation in your neighborhood.
2. If radio wave interference occurs between the terminal and "other
radio stations", use the terminal in a different location or "Turn the power
OFF" to avoid the radio wave interference.
3. For details, contact "General Inquiries" on the last page of this
manual.
■ Wireless LAN (WLAN) exchanges information using radio waves, and
allows you to freely establish LAN connection if you are within an area
where radio wave reaches. On the other side, if you communicate
without appropriate security settings, communications may be
intercepted or hacked by malicious parties. It is recommended to make
necessary security settings on your judgement and responsibility.
■ Wireless LAN
Do not use Wireless LAN in a place where magnetized by electric
products, AV, OA equipment, etc. or where electromagnetic wave is
generated.
･ If magnetism or electrostatic noise affects the terminal, noise may be
increased or communication may not be available (especially when using
microwave oven, it may affect the terminal).
･ Using near TV or radio may cause poor reception or TV screen may be
blurred.
･ When multiple wireless LAN access points exist near the terminal and they
use the same channel, search may not be performed correctly.
･ To use WLAN overseas, places for using may be limited in some countries.
In such case, check the conditions such as available frequency,
regulations, etc. for the country to use it.
■ Cautions on using 2.4 GHz devices
In the frequency band for WLAN devices, in addition to home electric
appliances such as a microwave oven and industrial/scientific/medical
devices, in-plant radio stations for identification of mobile objects used
in production lines of a factory (a license is required), specified low
power radio stations (a license is not required), or amateur radio
stations (a license is required) can be in operation.
1. Before using this device, confirm that in-plant radio stations for
identification of mobile objects, specified low power radio stations or
amateur radio stations are not in operation in your neighborhood.
2. If this device generates harmful radio wave interference against inplant radio stations for identification of mobile objects, change the using
frequency promptly or stop using wireless LAN function, and contact
"General Inquiries" on the last page of this manual, then consult about
treatment for prevention of the interference (for example, installation of
partitions etc.).
3. If this device generates harmful radio wave interference against inplant radio stations for identification of mobile objects or amateur radio
stations, or if any trouble, contact "General Inquiries" on the last page of
this manual.
■ FeliCa reader/writer function of the terminal uses weak waves requiring
no licenses for radio stations.
■ It uses 13.56 MHz frequency band. When using other reader/writers in
your surroundings, keep the terminal away sufficiently from them.
Before using the FeliCa reader/writer, confirm that there are no radio
stations using the same frequency band nearby.
Wireless LAN (WLAN)
FeliCa reader/writer
17
Contents/Precautions
■ Do not use a remodeled terminal. Using a remodeled terminal violates
the Radio Law.
The terminal is certified according to technical standard conformance of
specified wireless equipment based on the Radio Law, and as a proof of it,
the "Technical Compliance Mark " is depicted on the engraved sticker of
the terminal.
If you remodel the terminal by removing its screws, your certification of
technical standard conformance becomes invalid.
Do not use the terminal with its certification of technical standard
conformance invalid as it violates the Radio Law.
■ Be careful when you use the terminal while driving a car etc.
Using a mobile phone while driving is subject to penal regulations.
However, absolutely necessary cases such as rescue of a sick person or
maintaining public's safety are exempted.
■ Use FeliCa reader/writer function only in Japan.
FeliCa reader/writer function of the terminal conforms to Japanese radio
standards. If you use this function overseas, you may be punished.
■ Do not alter the basic software.
Repairs may be refused as a modification of software.
CAUTION
18
Before using the terminal
Before using the terminal
Part names and functions
k
i
b
o
p
j
n
m
c
f
e
a
d
h
g
l
s
r
t
u
q
v
u
x
w
19
Before using the terminal
1Seg/Mobacas antenna
T Power key
･ Turn the power ON/OFF, set sleep mode manually.
External connection jack
･ Use for charging or connecting to a PC etc.
Headjet jack
･ Use for earphones.
Infrared port
･ Use for infrared communication
Earpiece
･
Hear the party's voice from here.
Display (Touch panel)
･ Touch directly with the finger to operate.
J Home key (Touch key)
･ Return to the Home screen.
･ Touch and hold to display a list of recently used applications.
B Back key (Touch key)
･ Back to the previous screen.
Microphone
･ Send your voice to the party whom you are talking with or record the
voice.
･ To attach a strap, remove the back cover, pick up rubber stuffing, pass a
strap through the hole of the terminal, hang the strap with the hook inside
of the terminal and then attach the back cover (attach the rubber stuffing
if required).
Light sensor/Proximity sensor
*1
･ Sense the ambient brightness to adjust brightness of the display.
･ Sense a face closing during a call and prevent the erroneous operation of
the touch panel.
In-camera
･ Shoot still images or videos.
LED light
･ Turn on when charging or flash when the battery level is low.
･ Flash to notify a missed call or incoming mail.
M Menu key (Touch key)
･ Display menu on each screen.
Volume up/down key (+ / -)
･ Adjust incoming ringtone, voice sound, playback sound of music, etc.
Strap hole
Bluetooth/Wi-Fi antenn
a
*2
GPS antenna
*2
Speaker
･ Emit incoming ringtone or playback sound of music.
Back cover
･ Do not press button cover of the power key forcibly when the back cover
is removed from the terminal. Key cover may be removed.
･ Do not remove the sticker on the back side of the back cover. If it is
removed, IC card may not be able to be read/written.
FOMA/Xi antenna
*2
Out-camera
･ Shoot still images or videos.
Flash
･ Light for camera shooting.
mark
･ IC card is installed. Use Osaifu-Keitai function holding this mark over the
reader, or send/receive data via iC communication by downloading a
compatible application. IC card cannot be removed.
*1: Putting a protective sheet or seal on each sensor may cause
erroneous operation.
*2: The antenna is built-in the terminal. Covering around the antenna by
the hand may affect the quality of call or communication.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
20
Before using the terminal
■ Connecting earphone/microphone
To connect round plug (3.5 mmØ) of earphone/microphones etc. to the
external connection jack of the terminal, use the supplied Connecting
earphone adapter cable with antenna (Sample).
･ Make sure the orientation of microUSB connector (front/back) and insert
horizontally.
docomo mini UIM card
The docomo mini UIM card is an IC card in which user information such as
your phone number etc. is saved. When docomo mini UIM card is not
inserted to the terminal, some functions (send/receive call etc.) are not
available.
･ You can use the terminal only with docomo mini UIM card. If you have a UIM
or FOMA card, bring it to a docomo Shop to replace.
･ For details on docomo mini UIM card, refer to the docomo mini UIM card
manual.
･ Turn the terminal OFF, remove the back cover and the battery pack before
installing/removing docomo mini UIM card (P.23).
1
Insert docomo mini UIM card into the card slot with the
IC side facing down in the direction of arrow until it is
stopped
･ Check the orientation of docomo mini UIM card corner cut.
Connecting
earphone
adapter cable
with antenna
Orientation of microUSB
connector
Plug (3.5mmØ ) of
earphone/microphone
Installing/Removing docomo mini UIM card
Installing
21
Before using the terminal
1
Lightly press docomo mini UIM card with fingertip and
slide in the arrow direction slowly to remove
Information
･
When handling docomo mini UIM card, take care not to touch or scratch the IC.
･ Note that, installing/removing docomo mini UIM card forcibly may damage
the docomo mini UIM card.
･ Be careful not to lose docomo mini UIM card after removed.
microSD card
Using microSD card allows you to save data in the terminal or import data
in the microSD card to the terminal.
･ The terminal supports microSD card of up to 2 GB, and microSDHC card of
up to 32 GB (as of October, 2012).
･ For compatible information on each microSD card, contact a manufacturer of
the microSD card.
･ Remove the back cover before installing/removing microSD card (P.22).
1
Insert microSD card into the card slot with the metal
side facing down in the direction of arrow until it is
stopped
Removing
Corner cut
IC
Installing/Removing microSD card
Installing
22
Before using the terminal
･ Be sure to unmount microSD card before removing microSD card (P.101).
1
Lightly press microSD card with fingertip and slide in
the arrow direction slowly to remove
Battery pack
･ Attach/Remove the battery pack holding the terminal with hands after turning
off the power.
1
Put your fingertip into the groove of the back cover,
then lift it up in the direction of the arrow to remove
Removing
Attaching/Removing the battery pack
Installing
Groove
23
Before using the terminal
2
With a recycle mark printed side up, align the contacts
of battery pack with the ones of the terminal, and then
pushing in the direction of a, push it in the direction
of b to attach
3
Align the top of the back cover with the one of the
terminal, and then push in the direction of arrow to
attach
4
Push ○ parts to check that no gaps exist between the
terminal and the back cover
1
Remove the back cover, hook your fingertip etc. in the
groove of the terminal, and then lift the battery pack up
in the direction of the arrow
b
a
Metal contacts
Recycle mark
Removing
Groove
24
Before using the terminal
Charging
Charge the battery before using for the first time or after an extended
period of disuse.
･ For estimate of charging time, stand-by time, calling time, see "Main
specifications" (P.180).
･ If you use the terminal while charging, it may take time to complete charging
or charging may not complete.
･ If charging starts with battery level is low, it may take time to turn on LED light.
･ It is recommended to use AC adapter 03 (optional).
･ Compatible power voltage for AC adapter 03 (optional) is between 100V AC
and 240V AC. When using the terminal overseas, use the adapter plug that
is suitable for use in your travel destination. Do not charge the battery with a
transformer for overseas travel.
･ The battery pack is a consumable part. Each time it is charged, available
time with each charging reduces. Talking on the phone for a long time while
charging may reduce the battery pack lifetime.
･ If available time with each charging becomes about a half of that for a new
battery, replacing the battery is recommended because it means near the
end of life. The battery pack may swell out as it comes to near the end of its
lifetime depending on the usage conditions, but it is not a problem.
*: When "Mobile networks" (P.162) is set to "LTE/3G/GSM (Auto)"
Precautions on charging
Charging
Battery pack life
Estimated usage time of battery pack
Continuous
stand-by time
LTE Stationary (Auto)* : Approx. H
FOMA/3G Stationary (Auto)* : Approx. H
GSM Stationary (Auto)* : Approx. H
Continuous
call time
FOMA/3G Approx. min.
GSM Approx. min.
Estimated charge time of battery pack
AC adapter 03 Approx. min.
DC adapter 03 Approx. min.
25
Before using the terminal
<Example : Changing with AC adapter 03 (optional)>
1
Insert microUSB plug of microUSB cable into the
external connection jack of the terminal with USB
mark side down horizontally (a)
2
Insert a USB plug of a microUSB cable into the USB
connector of AC adapter jack horizontally as shown
(b)
3
Insert the AC adapter's power plug into an outlet (c)
Charging starts. appears on the status bar. When charging is
complete, appears on the status bar.
･ LED light turns on while charging. Light color indicates charging state
estimation. Red indicates 14% or less, yellow indicates 15 – 90%,
green indicates 90% or more remaining battery level.
4
When charging is complete, pull out the power plug of
the AC adapter main unit from the outlet
5
Pull out microUSB plug of the microUSB cable from
the external connection jack of the terminal
horizontally
6
Pull out USB plug of the microUSB cable from AC
adapter main unit horizontally
DC adapter is an adapter for connecting vehicle cigarette lighter socket
(12V/24V) and the terminal for charging. For details, refer to the manual of
DC adapter.
Information
･ If the DC adapter's fuse blows, replace it only with the specified fuse. Fuse is
a consumable part. Purchase it at an auto-supply shop etc. near you.
You can charge connecting the terminal and a PC with Micro USB Cable
01 (optional).
･ For procedure of connecting to a PC, see P.117.
Information
･ Charging is not available when a PC is power off except for some devices.
Charging with AC adapter
c
b
a
USB plug
External connection
jack
Power plug
USB connector
LED light
AC adapter 03 main unit
microUSB cable
microUSB plug
DC adapter (optional)
Charging with a PC
26
Before using the terminal
<Changing with Desktop Holder HW02 (optional) and AC adapter 03
(optional)>
1
Insert microUSB plug of microUSB cable into the
external connection jack of the Desktop Holder with
USB mark side up horizontally (a)
･ Insert slowly and horizontally so as not to give excessive force to the
plug of microUSB cable.
2
Insert a USB plug of a microUSB cable into the USB
connector of AC adapter jack horizontally (b), then
insert the power plug of AC adapter into power outlet
(c)
3
Align the external connection jack of the terminal and
charging jack of the Desktop Holder to attach (d)
LED light turns on while charging. It turns off when charging is complete.
･ Firmly install the terminal to the desktop holder. If the external
connection jack is not connected to the charging jack of the desktop
holder properly, charging may be failed or charge connecting with a
PC (USB) may be indicated.
4
When charging is complete, hold the desktop holder
with your hand and then lift the terminal up to remove
5
Remove the AC adapter main unit from the outlet
6
Pull out microUSB plug of the microUSB cable from
the external connection jack of the Desktop Holder
horizontally
7
Pull out USB plug of the micro USB cable from the AC
adapter main unit horizontally
Charging with Desktop Holder
c
b
a
d
AC adapter 03 main unit
LED light
microUSB
cable
External
connection
jack
27
Before using the terminal
Turning power ON/OFF
1
Press and hold T for 2 sec. or more
･ When the power is ON for the first time, make initial settings (P.30).
2
Cancel the screen lock
For canceling the screen lock, see "Canceling the screen lock" (P.28).
Information
･ It may take 1 minute or more to display the Home screen after the power is
ON.
･ When the terminal does not respond even if T is pressed, charging may
not be enough. Fully charge and retry operating.
･ When the screen lock is set to "Touch", the notification panel can be displayed
on the lock screen.
1
Press and hold T for 1 sec. or more
2
"Power off" → "OK"
･ You can restart the terminal, set Airplane mode (P.94) or Silent mode
(P.99) from the mobile phone options screen.
When no operation is performed for certain period of time, the display is
automatically turned off and the terminal turns into sleep mode. To cancel
sleep mode, press T.
Turning power ON
Turning power OFF
Canceling sleep mode
Mobile phone options screen
28
Before using the terminal
By setting the screen lock (P.107), you can lock the terminal no to operate
it until the specified operation is performed after the power is ON or the
sleep mode is canceled. Also, you can lock the terminal manually to
prevent from erroneous operations.
<Example : When the screen lock is set to "Touch">
1
On the lock screen, tap
･ When the screen lock is set to "Touch", tap an icon on the lock screen
to activate the camera directly. And when there is notification of
missed call or sp-mode mail, number (number of notifications)
appears on the icon.
■ To lock manually
a Press T
Basic operation
The display of the terminal is a touch panel for touching directly with finger
to operate. Various operations are available by touching patterns.
The touch panel of the terminal senses movements of finger using static
electricity to operate.
･ The touch panel is designed for being touched lightly with fingers. Do not
push it forcibly with a finger or press it with sharp objects (nail, ballpoint pen,
pin, etc.).
･ Touching the touch panel may not work in the following cases. Note that it
may cause malfunction.
- Operation with gloved hands
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet, seal, etc. on the display
Information
･ When you tap other than a confirmation screen or status bar while a pop-up
such as confirmation screen appears, an operation may be stopped.
Canceling the screen lock
Using the touch panel
Before using the touch panel
Loading...