Before using your terminal, or when necessary, read this
manual to ensure safe use and handling.
Learning operations
"Quick start guide" (in Japanese only)
This manual provides information about screens and
operations of basic functions.
"Instruction Manual" application (e-manual)
(installed in the terminal) (in Japanese only)
This manual provides information and operations of all the
functions.
<Operation steps>
Manual]→Select a search method
If you delete "Instruction Manual", you can access Google
Play from Play Store to install again.
<Operation steps>
→
Search "
説明書
(Instruction Manual)"→[INSTALL]
This manual provides information and operations of all the
functions.
〈
From PC〉 http://www.nttdocomo.co.jp/english/support/
trouble/manual/download/index.html
*You can download the latest information.
From the Home screen, →[Instruction
From the Home screen, →[Play Store]
取扱説明書
(Instruction Manual)" and select "
"INSTRUCTION MANUAL" (PDF file)
取扱
・
Viewing this manual
In this manual, "F-06E" mobile terminal is usually referred to
as "the terminal".
・
The images or illustration used in this manual are examples.
They may differ from the actual displays.
・
In this manual, explanations and screen images for terminal
color "White", "docomo Palette UI" as Home application and
"GREEN-BLUE" as Kisekae are provided.
・
In this manual, "authenticate" indicates the operating
procedure for entering security code or performing
fingerprint authentication depending on functions.
・
Unauthorized copying of parts of or this entire manual is
prohibited.
・
The contents in this manual, URL and contents are subject to
change without prior notice.
Index ...............................................................................198
3
Contents/Precautions
Before using the terminal
・
This terminal supports LTE, W-CDMA, GSM/GPRS, Wireless
LAN System.
・
Because your terminal uses wireless transmission, it may
not function in locations where it is difficult for radio waves
to penetrate, such as tunnels, underground passages and
some buildings, in areas where radio waves are weak, or out
of Xi and FOMA service area. Even when you are high up in
a tall building or condominium and nothing blocks your
view outside, your terminal may not be able to receive or
transmit signals. Also, communication may be interrupted
even when there are strong radio waves with 4 signal status
icons on the terminal and you are not moving (traveling).
・
Because your terminal uses radio waves to communicate, it
is possible that a third party may attempt to tap your calls.
However, the LTE, W-CDMA, GSM/GPRS automatically
applies a confidential communication function to all calls, so
even if a third party could somehow tap a call, they only hear
noise.
・
Your terminal encodes voice communication as digital data.
When you are operating your terminal while moving to a
location subject to weaker radio wave conditions, the
transmitted digital data may not be correctly decoded and as
a result the decoded voice may differ somewhat from the
actual voice.
・
Maintain a separate record of the data you saved in the
terminal. Note that DOCOMO assumes no responsibility for
any loss of saved contents of data resulting from
malfunction, repair, changing of the model or other
handling of the terminal.
・
In the terminal, as it is for a PC, some applications that you
install may give instability of the operation, or may send
your location information or personal information
registered to the terminal to outside via the Internet and the
information may be used improperly. Please thoroughly
check a provider and operation status of the application etc.
which you want to use beforehand and then use it.
・
You are recommended to save important data to microSD
card or a PC.
・
This terminal supports Xi Area, FOMA Plus-Area and FOMA
HIGH-SPEED Area.
・
The terminal does not support i-mode sites (programs) or
i-αppli.
・
You can use the terminal only with docomo mini UIM card.
If you have a UIM or FOMA card, bring it to a docomo Shop
to replace.
・
Even in Manner mode, shutter sound, auto focus lock sound,
count down sound for self timer, and Find Me Ringtone
sound for Bluetooth Low Energy setting are emitted.
・
You can check your own phone number in the following
step.
From the Home screen, →[docomo phonebook]→[My
profile]
・
The terminal automatically performs communication for
some functions, for example, to synchronize data, check the
latest software or maintain connection with the server. If you
transmit a large amount of data such as downloading
applications or watching video, a packet communication
charge becomes high. Subscription of packet flat-rate
service is highly recommended.
・
Depending on the applications or service you use, packet
communication charge may be applied even in Wi-Fi
communication.
4
Contents/Precautions
・
The software on the terminal can be updated with the latest
information.→P180
・
Improving the terminals quality or upgrading operation
system may be included in the software update. And some
applications used in the previous version may not be
available or some unintended bugs may occur after
software update.
・
Display is manufactured by taking advantage of highly
advanced technology but some dots may be always or never
lit. Note that, this shows characteristics of liquid crystal
displays and not defects in the terminals.
・
When the memory of the microSD card or the terminal is
almost full, running applications may not operate normally.
In this case, delete saved data.
・
Google applications and service contents are subject to
change without prior notice.
・
For the information on the services provided by Google,
refer to the terms of use for Google Inc. And for the details
on other web services, read terms of use for each service.
・
If your terminal is lost, change your each account password
using a PC to prevent other persons from using Google
services such as Google Talk, Gmail, Google Play, etc. and
Twitter.
・
Set the screen lock to ensure the security of your terminal for
its loss.→P135
・
The terminal supports only sp-mode, mopera U and
Business mopera Internet. Other providers are not
supported.
・
To use tethering, a subscription to sp-mode is required.
・
Packet communication charge when using tethering varies
depending on the charging plan you use. Subscription of
packet flat-rate service is highly recommended.
・
As Mobacas is a service using communications, using the
service incurs packet communication charge. Subscription
of packet flat-rate service is recommended.
・
For details on usage fee, refer to http://
www.nttdocomo.co.jp/english/.
Precautions (Always follow
these directions)
・
Before using your terminal, or when necessary, read the
precautions below to ensure safe use and handling. After
reading this manual, keep it carefully.
・
These precautions are intended to protect you and others
around you. Read and follow them carefully to avoid injury,
damage to the product or damage to property.
・
The signs below differentiate between the levels of danger
that can occur if the product is not used within the specified
guidelines.
This sign denotes that death
DANGER
WARNING
or serious injury may directly
result from improper use.
This sign denotes that death
or serious injury may result
from improper use.
5
Contents/Precautions
This sign denotes that minor
CAUTION
・
The symbols below show specific directions.
This symbol denotes that the action is
prohibited.
Don’t
This symbol denotes that disassembling the
phone or its components is not allowed.
No disassembl y
This symbol denotes that using the phone or its
components in a bathroom or other highly
No liquids
humid area is not allowed.
This symbol denotes that using the phone or its
components with wet hands is not allowed.
No wet hands
This symbol denote s that an instruction must be
obeyed at all times.
Do
This symbol denotes that the equipment should
be unplugged.
Unplug
injury or damage to property
may result from improper
use.
■
Precautions contain the description below.
Handling the terminal, adapter, desktop holder and docomo
mini UIM card (common)........................................................6
Handling the terminal..................................................................8
Handling adapter and desktop holder .....................................11
Handling docomo mini UIM card.............................................12
Handling mobile phones near electronic medical equipment
Material list.................................................................................13
◆
Handling the terminal, adapter, desktop
holder and docomo mini UIM card
(common)
DANGER
Do not use, store or leave the terminal in hot
places (e.g. by the fire, near a heater, under a
kotatsu, in direct sunlight, in a car in the hot sun).
Don’t
May cause fire, burns or injuries.
Do not put the terminal into heating cooking
device such as microwave oven or high-pressure
container.
Don’t
May cause fire, burns, injuries, electric shock.
Do not disassemble or remodel the equipment.
May cause fire, burns, injuries, electric shock.
No disassembl y
6
Contents/Precautions
Do not let the terminal get wet with water,
drinking water, urine of pet animals, etc.
May cause fire, burns, injuries, electric shock.
No liquids
For waterproofness, refer to the page.
"Waterproofness/Dustproofness"
Use the adapter specified by NTT DOCOMO for
your terminal.
May cause fire, burns, injuries, electric shock.
Do
WARNING
Do not throw the equipment or give a strong
force or hard shock to it.
May cause fire, burns, injuries, electric shock.
Don’t
Keep conductive materials (metal pieces, pencil
lead, etc.) from coming in contact with the
charging terminal, external connection jack, or
Don’t
stereo earphone jack. Do not put those materials
inside the terminal.
May cause fire, burns, injuries, electric shock.
Do not cover or wrap the terminal with a blanket
etc. while using or charging.
May cause fire or burns.
Don’t
Turn the terminal OFF and stop charging before
entering a place such as a gas station where
Do
flammable gases are generated.
The gas may catch fire.
When using Osaifu-Keitai in a place as a gas station, turn
OFF the terminal before using it.
(When NFC/Osaifu-Keitai lock is activated, deactivate it
before turning OFF the terminal.)
If the equipment starts giving off a strange smell,
overheats, becomes discolored or deformed
Do
→
P20
during use, charging or in storage, immediately
perform the following operations.
・
Remove the power plug from the wall outlet or
cigarette lighter socket.
・
Turn the terminal OFF.
May cause fire, burns, injuries, electric shock.
CAUTION
Do not leave the equipment on unstable or
sloping surfaces.
The equipment may fall and cause injuries.
Don’t
Do not store the equipment in extremely humid,
dusty or hot areas.
May cause fire, burns, electric shock.
Don’t
Children using the equipment should be
instructed in proper operation by an adult. Do
Do
not allow them to use the equipment without
adult supervision.
May cause inju ries.
Store the equipment out of reach of infant.
May be accidentall y swallowed or cause injuries.
Do
7
Contents/Precautions
Be careful especially when using the terminal
connected to the adapter continuously for a long
Do
time.
If you use applications, call or watch TV while charging the
battery for a long time, the terminal and adapter may be
heated.
Directly touching a hot part for a long time, you may have
redness, itching or rash on your skin, or it may result in
low-temperature burns depending on your constitution
and/or health condition.
◆
Handling the terminal
■
The internal battery for the terminal is as follows.
DisplayBattery type
Li-ion 00Li-ion battery
DANGER
Do not throw the terminal into the fire.
May cause internal battery to ignite, burst, heat or leak.
Don’t
Do not nail the terminal, hit with a hammer or
step on it.
May cause internal battery to ignite, burst, heat or leak.
Don’t
If the internal battery fluid etc. contacts eyes,
immediately flush the eyes with clean water and
Do
see a doctor right away. Do not rub the eyes.
May cause loss of sight.
WARNING
Do not direct the infrared data port toward your
eye and transmit signals.
May cause harmful effect on eyes.
Don’t
Do not direct the infrared data port toward home
electric appliances etc. equipped with infrared
device when using infrared communication.
Don’t
May cause an accident because of malfunction of infrared
device.
Do not turn on the light by getting the lighting
part closer to other person's eyes. When
shooting infants, keep at least 1 m away from the
Don’t
object.
May impair eyesight. And may cause accidents like injury
etc., by dazzling or astounding other people.
Do not put foreign objects such as liquid like
water, metal pieces or burnable things into
docomo mini UIM card slot or microSD card slot.
Don’t
May cause fire, burns, injuries, electric shock.
Do not turn on the light aiming directly at the
driver of the car etc.
May disturb driving and cause an accident.
Don’t
8
Contents/Precautions
Turn the terminal OFF in areas where use is
prohibited, such as in airplanes and hospitals.
May cause electronic equipment or electronic medical
Do
equipment to fail or malfunction.
When using the phone in a medical facility, be sure to
observe the regulations of the facility.
If you do prohibited act such as using the phone in an
airplane, you will be punished according to law.
If usage of the terminal in an aircraft is admitted by setting
airplane mode, etc., use the terminal under the direction of
the airline.
When you talk by setting handsfree or ring alert
is sounding, keep the terminal away from your
Do
ear.
And, when connecting the earphone/
microphone etc. to the terminal and play a game
or music, adjust the volume moderately.
Too loud volume may cause a hearing loss.
And, if you cannot hear the sound around you clearly, it
may cause an accident.
If you have weak heart, be careful when setting
the incoming vibrate alert (vibration) or alert
Do
volume setting.
May cause harmful effect on heart.
When you use electronic medical equipment,
check with the equipment manufacturer to
Do
determine how the device is affected by radio
waves before using.
May cause harmful effect on electronic medical equipment
etc.
Turn the terminal OFF near high-precision
electronic control equipment or electronic
Do
equipment using low-power signals.
May cause the equipment to fail or malfunction.
Examples of electronic equipment to avoid
*
Hearing aids, implanted pacemakers or de fibrillators, other
electronic medical equipment, fire al arms, automatic doors and
other automatic control equipment.
Users wearing implanted pacemakers or defibrillators or other
electronic medical equipment should check with the
manufacturer or sales outlet about the effect of radio frequencies
on the equipment.
When the display or camera lens is accidentally
broken, be careful of fragments of broken glass
Do
or exposed internal parts of the terminal.
Surface of display is made of hardened glass and camera
lens is made of plastic panel so as not to be shattered,
however, if you mistakenly touch broken or exposed parts,
you may be injured.
If the internal battery leaks or gives off a strange
smell, immediately remove the terminal from the
Do
vicinity of open flames.
The vapors from leaking battery fluid may ignite, fire or
explode.
9
Contents/Precautions
CAUTION
Do not swing the terminal by the antenna, strap,
etc.
May cause accident such as injury to yourself or others by
Don’t
hitting.
Do not use the damaged terminal.
May cause fire, burns, injuries, electric shock.
Don’t
When using the motion sensor, check the safety
around you, hold the terminal firmly, and do not
shake it unnecessarily.
Don’t
May cause accident such as injuries.
If the display part is accidentally broken and the
liquid crystal leaks out, do not make the
substance contact with your skin of face or
Don’t
hands.
May cause loss of sight or skin problems.
If the liquid crystal gets into your eyes or mouth, rinse it
with clean water and see a doctor immediately.
And, if the liquid adheres to skin or clothing, use alcohol
etc. to wipe it off, then wash with soap.
Do not discard the old terminal together with
other garbage.
May cause malfunction or damage. Bring the old terminal
Don’t
into a sales outlet such as docomo Shop. If your local
municipality has a recycling program, dispose of them as
provided for.
To use the terminal in car, check with automobile
manufacturer or dealer to determine how the
Do
device is affected by radio waves before using.
In rare cases, using the phone in some vehicle models can
cause the vehicle's electronic equipment to malfunction. In
that case, stop using the terminal immediately.
The use of the terminal may cause itching,
rashes, eczema, or other symptoms depending
Do
on the user's physical condition. If you develop
skin problems, stop using the phone
immediately, and see a doctor.
For material of each part →P13 "Material list"
When watching the display, take a certain
distance from the display in a fully bright place.
May reduce visual ac uity.
Do
If fluid etc. leaks out from the internal battery, do
not make the fluid contact with your skin of face
Do
or hands.
May cause loss of sight or skin problems.
If the fluid etc. put into your eyes or mouth, or contacts
skin or clothes, immediately flush the contacted area with
clean water.
If the fluid etc. put into the eyes or mouth, immediately see
a doctor after flushing.
10
Contents/Precautions
◆
Handling adapter and desktop holder
WARNING
Do not use the adapter cord if it gets damaged.
May cause fire, burns, electric shock.
Don’t
Do not use the AC adapter or desktop holder in a
bathroom or other highly humid area.
May cause fire, burns, electric shock.
Don’t
Always use the DC adapter with a negativeground vehicle. Do not plug it into a positiveground vehicle.
Don’t
May cause fire, burns, electric shock.
When it starts to thunder, do not touch adapter.
May cause electric shock.
Don’t
Do not short the charging terminal while it is
connected to the outlet or cigarette lighter
socket. Do not touch the charging terminal with
Don’t
a part of your body such as your hand or finger.
May cause fire, burns, electric shock.
Do not place heavy objects on the adapter cord.
May cause fire, burns, electric shock.
Don’t
When you insert and remove the AC adapter
from power outlet, do not contact a metal strap
or other metal objects with the jack.
Don’t
May cause fire, burns, electric shock.
Do not touch the adapter cord, desktop holder or
outlet with wet hands.
May cause fire, burns, electric shock.
No wet hands
Only use with the specified power source and
voltage. When charging the terminal overseas,
Do
use AC adapter for global use.
If incorrect voltage is used, this may cause fire, burns or
electric shock.
AC adapter : 100V AC
DC adapter : 12V or 24V DC (spe cific for negative ground
vehicle)
AC adapter for global use : Between 100V and 240V AC
(Connect to the AC outlet for internal household use)
If the DC adapter's fuse blows, replace it only
with the specified fuse.
May cause fire, burns, electric shock. For the specified
Do
fuse, see the instructions that come with the DC adapter.
Wipe off any dust that accumulates on the power
plug.
May cause fire, burns, electric shock.
Do
When you connect the AC adapter to an outlet,
firmly connect to the outlet.
May cause fire, burns, electric shock.
Do
When you disconnect the power plug from the
outlet or cigarette lighter socket, do not pull the
Do
adapter cord with excessive force. Instead, hold
the adapter to disconnect.
May cause fire, burns, electric shock.
11
Contents/Precautions
Always remove the power plug from the outlet
or cigarette lighter when not using the adapter
Unplug
for an extended period.
May cause fire, burns, electric shock.
Immediately remove the power plug from the
outlet or cigarette lighter socket if water or other
Unplug
fluids get into the adapter.
May cause fire, burns, electric shock.
Always remove the power plug from the
cigarette lighter socket when cleaning the
Unplug
equipment.
May cause fire, burns, electric shock.
◆
Handling docomo mini UIM card
CAUTION
Be careful of the cut surface when removing
docomo mini UIM card.
May cause injuries.
Do
◆
Handling mobile phones near electronic
medical equipment
WARNING
Wearers of medical equipment such as
implanted pacemakers or defibrillators must
Do
carry and use the terminal at least 15 cm away
from the implanted device.
The terminal's signals may affect the performance of
electronic medical equipment.
When electronic medical equipment other than
implanted pacemakers or defibrillators are in use
Do
outside of medical facilities (such as in home care
settings), check with the device manufacturer to
determine how the device is affected by
electrical signals.
The terminal's signals may affect the performance of
electronic medical equipment.
When you are in a crowd etc. and you have
difficulties to keep a distance of 15 cm or more
Do
from others, turn the airplane mode on or power
off the terminal not to transmit signals.
There may be wearers of medical equipment such as
implanted pacemakers or defibrillators around you. The
terminal's signals may affect the performance of electronic
medical equipment.
When using the terminal in a medical facility, be
sure to observe the regulations of the facility.
Do
12
Contents/Precautions
◆
Material list
PartMaterial/Surface treatment
Display panelHardened glass/AF coating
Exterior case Front case,
TV/FM
transmitter
antenna
Receiver panelStainless steel/Enamel plating
Out-camera panel, Light
lens
Power key, Volume keyAluminum alloy
Jack cap, Slot capPC resin+Polyester elastomer
Stereo earphone jackPA resin
rear case
Lateral side Aluminum alloy
CornerPC+ABS resin/Discontinuity
Top section PC+ABS resin/Acrylic UV
Pipe section Stainless steel
Root flexure
section
Root
rotating
section
PC resin/Acrylic UV curable
coating
evaporated+Acrylic UV curable
coating
curable coating
Nickel titanium alloy
Stainless steel/Nickel plating
Acrylic resin
resin
PartMaterial/Surface treatment
Fingerprint
sensor
Infrared data portPC resin/Acrylic UV curable
Charging terminalStainless steel/Gold plating
Desktop
Holder F40
SensorEpoxy resin
Outer
periphery
Exterior
case,
Speaker
duct
LeverPOM resin
LockPA resin
StopTPE resin
ScrewIron/Trivalent chromate
Blind sheet PC resin
LabelPS resin
Rubber part Polyurethane
Contact
spring (pin)
External
connection
jack
Stainless steel/Titanium coating
coating (terminal color : Black),
multi-layer coating+Acrylic UV
curable coating (terminal color :
White)
ABS resin
Copper/Gold plating
Stainless steel/Tin plating
13
Contents/Precautions
Handling precautions
◆
General
・
F-06E is waterproof/dustproof, however, do not allow
water or dust to seep into the terminal and do not allow
accessories or optional devices to get wet or attached with
dust.
- Adapter, desktop holder, docomo mini UIM card are not
waterproof/dustproof. Do not use in a bathroom or other
highly humid area or do not let rain touch. Or putting the
terminal on your body, humidity of sweat may cause
internal corrosion and malfunction. Note that
malfunctions, which are determined to be caused by water
as result of inspections, are not covered by the warranty.
Since these conditions are outside the scope of the
warranty, a repair, if at all possible, is charged.
・
Clean the terminal with a dry soft cloth (such as a cloth for
eyeglasses).
- Rubbing it roughly with a dry cloth may scratch the
display.
- Drops of water or dirt left on the display may cause stains.
- If the terminal is wiped with alcohol, paint thinner, benzine
or detergent, the printing may disappear or color may
fade.
・
Clean the jack occasionally with a dry cotton swab etc.
- If the jack is soiled, connection gets worse and it may
cause power to be turned off or insufficient battery charge,
so clean the jack with a dry cotton swab etc.
Also, be careful never to damage the jack when cleaning it.
・
Do not place the terminal near an air-conditioner outlet.
- The rapid change in temperature may cause condensation,
causing internal corrosion and malfunction.
・
When using, be careful not to subject excessive force to the
terminal.
- If the terminal is crammed into a brimming bag or placed
in a pocket and sat on, display or internal PCBs may be
damaged or malfunction. And, if external devices are
plugged into the external connection jack or the stereo
earphone jack, the breakage of the connector or
malfunction may result.
・
Do not rub or scrape the display with a metal piece etc.
- May scratch the display, causing malfunction or damage.
・
Carefully read the separate instructions that come with
optional devices.
◆
The terminal
・
Do not press the surface of the touch panel strongly or
operate it with sharp objects such as a nail, a ballpoint pen
and a pin.
- It may damage the touch panel.
・
Avoid extreme temperature.
- Use the terminal where the temperature ranges between 5
and 40℃ (limited to the temporary use in a bathroom etc.
when temperature is above 36℃) and humidity ranges
between 45 and 85%.
・
The terminal may affect land-line phones, TVs or radios in
use nearby, so use it as far as possible from these
appliances.
14
Contents/Precautions
・
Maintain a separate record of the data you saved in the
terminal.
- If the data is deleted, DOCOMO assumes no responsibility
for the loss of any data.
・
Do not drop the terminal or subject it to shocks.
- May cause malfunction or damage.
・
Do not plug external devices into the external connection
jack or stereo earphone jack at a slant, or do not pull it
forcibly while it is plugged.
- May cause malfunction or damage.
・
It is normal for the terminal to become warm during use or
charging. Continue to use it.
・
Do not leave the terminal with the camera in areas under
strong direct sunlight.
- May cause discoloring or burn-in of elements.
・
Use the terminal with the jack cap and slot cap closed.
- Dust and/or water brought into the terminal cause
malfunction.
・
Do not give a strong impact on the fingerprint sensor or
scratch the surface.
- It may cause not only malfunction of the fingerprint sensor
but also disabling authentication.
・
Clean the fingerprint sensor with a dry soft cloth (such as a
cloth for eyeglasses).
- When the fingerprint sensor is dirty or gets wet on the
surface, it cannot read the fingerprint and may cause
decrease the authentication performance or erroneous
operation.
・
While microSD card is being used, do not take the card out
or do not turn off the terminal.
- May cause data loss or malfunction.
・
Do not bring magnetic cards etc. close to the terminal.
- Magnetic data in cash cards, credit cards, telephone cards,
floppy disks, etc. may be erased.
・
Do not bring magnetized objects close to the terminal.
- Bringing strong magnetism close may cause a
malfunction.
・
The internal battery is a consumable part.
- Replace the internal battery if the terminal has extremely
short operation time on a full charge, though it may vary
by operating conditions. For details of replacement of the
internal battery, contact "General Inquiries" on the last
page of this manual.
・
Charge the battery in an area within the proper ambient
temperature range (5-35℃).
・
The operation time provided by the internal battery varies
by the operating environment and internal battery
deterioration.
・
Be careful especially about the followings when storing the
terminal.
- Storing under the state of the full charge (right after
charging ends)
- Storing under the state of the empty charge (too
exhausted to turn on the terminal)
They may cause the internal battery performance to be
degraded or its lifetime to be shortened.
A recommended battery level to store the terminal is
approximately 40% of remaining battery level as a guide.
15
Contents/Precautions
◆
Adapter
・
Charge the battery in an area within the proper ambient
temperature range (5-35℃).
・
Do not charge the battery in the areas below.
- In areas of excessive humidity, dust or vibrations
- Near land-line phones or TVs/radios
・
It is normal for the adapter to become hot while charging.
Continue to use it.
・
When using the DC adapter for charging, keep the vehicle
engine running.
- The vehicle's battery could become flat.
・
When using an outlet with a mechanism preventing
unplugging, follow the handling instructions for that outlet.
・
Do not give strong shock. Do not deform the charging
terminal.
- May cause malfunction.
◆
docomo mini UIM card
・
Do not use excessive force to install/remove docomo mini
UIM card.
・
Note that DOCOMO assumes no responsibility for
malfunctions occurring as the result of inserting and using
docomo mini UIM card with another IC card reader/writer.
・
Always keep UIM ICs clean.
・
Clean docomo mini UIM card with a soft, dry cloth (such as
a cloth for eyeglasses).
・
Maintain a separate record of the data you saved in docomo
mini UIM card.
- If the data is deleted, DOCOMO assumes no responsibility
for the loss of any data.
・
To preserve the environment, bring the old docomo mini
UIM card to a sales outlet such as docomo Shop.
・
Take care not to scratch, touch accidentally or short IC.
- May cause data loss or malfunction.
・
Do not drop docomo mini UIM card or subject it to shocks.
- May cause malfunction.
・
Do not bend docomo mini UIM card or place heavy objects
on it.
- May cause malfunction.
・
Do not install docomo mini UIM card into the terminal with
a label or sticker put on.
- May cause malfunction.
16
Contents/Precautions
◆
Bluetooth devices
・
This terminal is equipped with the security features, that
are compliant with Bluetooth standards for communication
via Bluetooth. However, depending on the settings, there
may not be enough security. Be aware of security risks
when using Bluetooth.
・
DOCOMO assumes no responsibility for any information
which may be leaked during communication via Bluetooth.
・
Frequency bands
Frequency bands used by the terminal Bluetooth function
are as below.
abdc
2.4FH/XX1
a
2.4 : Radio equipment that uses the 2400 MHz band.
b
FH/XX : The modulation is the FH-SS method or other
method (method other than DS-SS method/DS-FH
method/FH-OFDM composite method/OFDM method).
c
1 : The expected interference distance is 10 m or shorter.
d
2483.5 MHz are used, and the bandwidth used by mobile
object identification devices cannot be avoided.
Available channels vary by countries.
Use of Bluetooth is limited in some countries. Confirm
regulations of the country/region to use it.
To use in airplane, confirm with airline company in advance.
: All bandwidths between 2400 MHz and
Cautions on using Bluetooth devices
In the bandwidth used by this terminal, in addition to
home electric appliances such as a microwave oven and
industrial/scientific/medical devices, in-plant radio
stations used to identify mobile objects used in
production lines of a factory that require a license,
specified low power radio stations, or amateur radio
stations that do not require a license (hereafter "other
radio stations") can be in operation.
1. Before using the terminal, check whether "other radio
stations" are in operation in your neighborhood.
2. If radio wave interference occurs between the terminal
and "other radio stations", use the terminal in a
different location or "Turn the power OFF" to avoid the
radio wave interference.
3. For details, contact "General Inquiries" on the last page
of this manual.
17
Contents/Precautions
◆
Wireless LAN (WLAN)
・
Wireless LAN (WLAN) exchanges information using radio
waves, and allows you to freely establish LAN connection if
you are within an area where radio wave reaches. On the
other side, if you communicate without appropriate
security settings, communications may be intercepted or
hacked by malicious parties. It is recommended to make
necessary security settings on your judgement and
responsibility.
・
Wireless LAN
Do not use wireless LAN in a place where magnetized by
electric products, AV, OA equipment, etc. or where
electromagnetic wave is generated.
- If magnetism or electrostatic noise affects the terminal,
noise may be increased or communication may not be
available (especially when using microwave oven, it may
affect the terminal).
- Using near TV or radio may cause poor reception or TV
screen may be blurred.
- When multiple wireless LAN access points exist near the
terminal and they use the same channel, search may not
be performed correctly.
・
Frequency bands
Frequency bands used by the terminal wireless LAN
function are as below.
a bc
d
2.4DS/OF4
a
2.4 : Radio equipment that uses the 2400 MHz band.
e
b
DS : The modulation is the DS-SS method.
c
OF : The modulation is the OFDM method.
d
4 : The expected interference distance is 40 m or shorter.
e
2483.5 MHz are used, and the bandwidth used by mobile
object identification devices can be avoided.
Using wireless LAN built-into the terminal in 5.2/5.3 GHz
outside is prohibited by the Radio Law.
Available channels vary by countries. To use WLAN
overseas, check the conditions such as available frequency,
regulation, etc. for the country.
To use in airplane, confirm with airline company in advance.
When docomo mini UIM card is not inserted or when you
are out of service area, channels 12, 13 of 2.4 GHz band and
5 GHz band are not available regardless of whether you are
in Japan or abroad.
Cautions on using 2.4 GHz devices
In the frequency band used by WLAN devices, in addition
to home electric appliances such as a microwave oven
and industrial/scientific/medical devices, in-plant radio
stations for identification of mobile objects used in
production lines of a factory (a license is required),
specified low power radio stations (a license is not
required), or amateur radio stations (a license is required)
can be in operation.
1. Before using this device, confirm that in-plant radio
stations for identification of mobile objects, specified
low power radio stations or amateur radio stations are
not in operation in your neighborhood.
: All bandwidths between 2400 MHz and
18
Contents/Precautions
2. If this device generates harmful radio wave
interference against in-plant radio stations for
identification of mobile objects, change the using
frequency promptly or stop using wireless LAN
function, and contact "General Inquiries" on the last
page of this manual, then consult about treatment for
prevention of the interference (for example, installation
of partitions etc.).
3. If this device generates harmful radio wave
interference against in-plant radio stations for
identification of mobile objects or amateur radio
stations, or if any trouble, contact "General Inquiries"
on the last page of this manual.
Cautions on using 5 GHz devices
Channel numbers and frequency bands available in Japan
are as follows.
・
5.2 GHz band : 5,180 to 5,240 MHz (36, 38, 40, 42*, 44, 46,
48 Ch)
・
5.3 GHz band : 5,260 to 5,320 MHz (52, 54, 56, 58*, 60, 62,
64 Ch)
* It is compatible with draft IEEE802.11ac version. The
terminal may not be able to communicate with officialversion-compatible devices or draft-versioncompatible devices from other companies. For
information on compatible merchandise, visit the
following website.
http://www.fmworld.net/product/phone/wifi/ (In
Japanese only)
◆
FeliCa reader/writer
・
FeliCa reader/writer function of the terminal uses weak
waves requiring no licenses for radio stations.
・
It uses 13.56 MHz frequency band. When using other
reader/writers in your surroundings, keep the terminal
away sufficiently from them. Before using the FeliCa
reader/writer, confirm that there are no radio stations using
the same frequency band nearby.
◆
FM transmitter
・
FM transmitter function of the terminal uses weak waves
requiring no licenses for radio stations.
・
It uses 78.4 - 89.6MHz frequency band. To use it, set
frequency not to common to FM radio station of the area
you use so as to avoid affecting FM radio users in
neighborhood.
19
Contents/Precautions
◆
CAUTION
・
Do not use a remodeled terminal. Using a remodeled
terminal violates the Radio Law/Telecommunications
Business Act.
The terminal is certified according to technical standard
conformance of specified wireless equipment based on the
Radio Law/Telecommunications Business Act, and as a
proof of it, the "Technical Compliance Mark " is depicted
on the electronic nameplate of the terminal. You can check
the electronic nameplate in the terminal as follows.
From the Home screen, →[Settings]→[About phone]
[Auth]
If you remodel the terminal by removing its screws, your
certification of technical standard conformance becomes
invalid.
Do not use the terminal with its certification of technical
standard conformance invalid as it violates the Radio Law/
Telecommunications Business Act.
・
Be careful when you use the terminal while driving a car etc.
Using a mobile phone while driving is subject to penal
regulations.
However, absolutely necessary cases such as rescue of a
sick person or maintaining public's safety are exempted.
・
Use FeliCa reader/writer function only in Japan.
FeliCa reader/writer function of the terminal conforms to
Japanese radio standards.
If you use this function overseas, you may be punished.
・
Use the FM transmitter only in Japan.
The FM transmitter of the terminal is compliant with
wireless standards and is authorized for use only in Japan.
If you use this function overseas, you may be punished.
・
Do not alter the basic software.
Repairs may be refused as a modification of software.
Waterproofness/Dustproofness
F-06E provides waterproofness of IPX5*1, IPX8*2 and
dustproofness of IP5X*3 with firmly closing the jack and slot
cap.
*1
IPX5 means that a phone keeps functioning after applying a jet
flow of 12.5 L/min. from every direction from a distance of
approximately 3 m for at least 3 minutes using water nozzle in 6.3
mm inner diameter.
*2
For F-06E, IPX8 means that a phone keeps functioning after F-06E
→
is slowly submerged to depth of 1.5 m in static tap water at room
temperature, left there for 30 minutes and then taken out. (Camera
function cannot be used under water.)
*3
IP5X means a protection degree that a phone keeps functioning
and safety after it is placed in a device with dust in diameter
75μm or less for 8 hours, agitated and then taken out.
❖
What you can do with waterproofness of
F-06E
・
You can talk and watch TV without an umbrella in the rain
(for rainfall of 20 mm or less per hour).
- When your hands or the terminal are wet, avoid opening/
closing the jack cap or slot cap.
・
The terminal can be washed with tap water at room
temperature.
- With pressing and holding the jack cap and slot cap not to
open, wash the terminal with tap water without rubbing
hard.
- Do not apply water flow stronger than allowed (→P20).
- Do not use brush, sponge, soap, detergent, etc.
20
Contents/Precautions
- If mud or soil is adhered to the terminal, eliminate the dirt
first by shaking several times in tap water of wash-basin
and then wash the terminal with running water.
- Drain water in the specified steps (
・
You can use the terminal in a bathroom.
- Do not immerse the terminal into a bathtub. Also, do not
use the terminal in hot water. May cause malfunction. If
you should fall the terminal into the bathtub, immediately
pick it up to drain water in specified procedure (
- Never put the terminal in hot spring water or water
containing soap, detergent or bath powder. In case the
terminal gets wet with water other than tap water, wash it
in the procedure above.
- You can use the terminal within 2 hours in a bathroom
where the temperature ranges between 5 and 45℃ and
humidity ranges between 45 and 99%.
- Rapid temperature change may cause condensation. If you
bring the terminal from a cold place to warm place such as
a bathroom, wait until the terminal reaches the room
temperature.
- Do not put hot water from a faucet or shower.
→
P23) after washing.
→
P23).
◆
To ensure waterproofness/dustproofness
To avoid water/dust ingress, be sure to observe the
followings.
・
When attaching/removing docomo mini UIM card or using
external connection jack, pull the cap with your fingertip by
the groove to open (a). Then push the tab down and ensure
that there are no gaps between the cap and the terminal (b).
Groove
a
・
Close the jack cap and slot cap firmly. Even a fine obstacle
(one hair, one grain of sand, tiny fiber, etc.) put between
contact surfaces may allow water to enter.
・
Do not poke the stereo earphone jack, microphone,
earpiece, speaker, temperature/humidity sensor or air vent
with a sharp object.
・
Do not let the terminal fall. It may be scratched causing the
waterproof/dustproof performance to degrade.
21
Groove
Contents/Precautions
a
bb
・
The rubber gaskets of the jack cap and slot cap play
important roles for keeping waterproof/dustproof
performance. Do not remove or scratch the rubber gaskets.
Also, prevent dust from adhering to them.
To keep the terminal waterproofness/dustproofness,
replacement of parts is recommended every 2 years
regardless of whether the terminal appears normal or
abnormal. DOCOMO takes the terminal to replace the
parts as a chargeable service. Bring the terminal to a sales
outlet such as a DOCOMO-specified repair office.
◆
Important precautions
Do not perform actions shown in the illustrations below.
<Example>
Using Soap/
Detergent/Bath powder
Applying strong
water flow
Washing with
brush/sponge
Soaking in
ocean water
Machine-washing
Using in
hot spring
Observe the following precautions to use the terminal
properly.
・
Accessories and optional devices are not waterproof/
dustproof. When watching TV, etc. with the terminal
installed in the included desktop holder, do not use it in a
bathroom, shower room, kitchen or lavatory even if it is not
connected to the AC adapter.
・
Do not apply water flow stronger than allowed (→P20). Even
if the F-06E is waterproof in IPX5 waterproof, water may
enter inside from a damaged section and cause troubles
such as electric shocks or corrosion of the battery.
・
If the terminal gets wet with salt water, sea water, refreshing
beverage, etc. or mud or soil adhered, wash it immediately.
If they dry out, it is hard to remove the dirt and it may cause
damage or malfunction.
・
Do not put the terminal in hot water, use it in a sauna or
apply hot airflow (from a hair dryer etc.) to it.
・
Do not move the terminal in water or slam the terminal
against the surface of water.
・
When you use the terminal in swimming pool, obey rules of
the facility.
・
The terminal does not float on water.
・
Do not leave water on the terminal. May short-circuit the
power jacks, or in a cold region, water may freeze causing
malfunction.
・
Do not leave water on the stereo earphone jack,
microphone, earpiece or speaker. Such water may interfere
with talking.
・
Do not leave water drop attached around the temperature/
humidity sensor. May cause incorrect measurement of
temperature/humidity.
22
Contents/Precautions
・
If the terminal gets wet with water or other liquids with the
jack cap or slot cap open, the liquid may get inside the
terminal causing electric shocks or malfunction. Stop using
the terminal, turn the power OFF and contact a DOCOMOspecified repair office.
・
If the rubber gasket of jack cap or slot cap is damaged or
deformed, replace it at DOCOMO-specified repair office.
DOCOMO does not guarantee actual operations under all
states. Malfunctions deemed to be caused by
inappropriate operation by the customer are not covered
by the warranty.
◆
Draining water
When the terminal is wet, water may flow out after wiping it
off; drain the water in the following steps.
a
Hold the terminal firmly and wipe off moisture on the
terminal surface and back side with dry, clean cloth etc.
b
Shake the terminal approximately 20 times, firmly holding
it, until there is no more water splattering.
c
Swing the terminal about 10 times against a dry, clean
cloth etc. to wipe off water remaining in the stereo
earphone jack, microphone, earpiece, speaker, keypad, TV/
FM transmitter antenna or charging terminals, air vent, etc.
d
Wipe off water drained from the terminal with dry, clean
cloth etc., and dry naturally.
・
Water, if any, remaining in the terminal may ooze up after
wiping off.
・
Do not wipe off water remaining in gaps directly with a
cotton swab etc.
23
Contents/Precautions
◆
Charging
Check the following during and after charging.
・
Never try to charge the battery when the terminal is wet.
・
When charging the battery after the terminal gets wet,
adequately drain water and wipe off water with a dry, clean
cloth etc., before inserting to the accessory desktop holder
or opening the jack cap.
・
When you open the jack cap for charging, close the cap
firmly after charging. It is recommended to use the desktop
holder for charging to prevent water or dust from seeping
inside from the external connection jack.
・
Do not use the AC adapter or desktop holder in a bathroom,
shower room, kitchen, lavatory or other highly humid area.
May cause fire or electric shock.
・
Do not touch the AC adapter or desktop holder with wet
hands. May cause electric shock.
24
Contents/Precautions
Before using the terminal
Part names and functions
d
ab
e f g
c
*
Slot cap is omitted in the
illustration shown on the left
l
oqnm
ph
r
s
t
kuv
i
kj
w
a
microSD card slot
b
docomo mini UIM card slot
c
Stereo earphone jack (waterproof)
When you insert the plug of the stereo earphones, the
earphone connecting MIC selection screen appears.
d
TV/FM transmitter antenna
Extend when watching TV/Mobacas/using FM transmitter.
e
Display (Touch panel)
f
Proximity sensor/RGB sensor
Proximity sensor prevents erroneous operation of the
touch panel during a call. RGB sensor senses ambient light
and brightness and automatically adjusts the display
backlight.
Putting a protective sheet or sticker on the sensor or
covering the sensor with fingers may cause erroneous
operation or incorrect sensing result.
g
Earpiece/Indicator LED (Illumination)
x
h
In-camera
i
External connection jack (MHL available)
y
j
Microphone
k
Strap hole
l
Infrared data port
m
Temperature/Humidity sensor
If you cover the sensor, detection may not be done
correctly.
Download "Temp Humid Checker application" from
manufacturer's website to use.
n
Bluetooth/Wi-Fi antenna section
o
mark
p
GPS/Xi antenna section
q
Flash
r
Out-camera
s
Speaker
*
*
25
Before using the terminal
t
Fingerprint sensor
Authenticate with fingerprint, cancel the screen lock, or set/
cancel sleep mode.
u
Air vent
v
Charging terminal
w
Xi/FOMA antenna
x
Volume key
Adjust sound volume, or set/cancel Manner mode by
pressing and holding D for 1 second or more.
y
Power key
Turn ON/OFF, or set/cancel sleep mode, public mode,
Airplane mode or Manner mode.
*
It is built-in the terminal. Covering around the antenna by the hand
may affect the quality.
*
UD
P
docomo mini UIM card
The docomo mini UIM card is an IC card in which user
information such as your phone number etc. is saved.
・
You can use the terminal only with docomo mini UIM card.
If you have a UIM or FOMA card, bring it to a docomo Shop
to replace.
・
If docomo mini UIM card is not inserted to the terminal,
some functions such as making/receiving calls and sending/
receiving SMS are not available.
・
For details on docomo mini UIM card, refer to the docomo
mini UIM card manual.
◆
Installing/Removing docomo mini UIM
card
・
Install/remove after turning OFF the power.
・
For inserting docomo mini UIM card, make sure to use the
tray. Inserting docomo mini UIM card without tray may
cause malfunction.
■
Installing
a
Open the slot cap with the back side of the terminal facing
up→P21
・
When the slot cap is opened, there is docomo mini UIM
card slot toward the back cover of the terminal and there
is the microSD card slot toward the display.
microSD card docomo mini UIM card
b
Put your fingertip on the tab of the tray and pull it straight
out
・
Tray is designed to be removed from the docomo mini
UIM card slot.
c
Place the docomo mini UIM card with IC side facing up
・
Check the orientation of docomo mini UIM card corner
cut.
26
Before using the terminal
d
Check that the back side of the terminal is facing up, then
insert the tray straight into the docomo mini UIM card slot
Tray
e
Close the slot cap of the terminal→P21
■
Removing
a
Open the slot cap with back side of the terminal facing up,
put your fingertip on the tab of the tray, then pull it out
straight to remove the docomo mini UIM card.
b
Close the slot cap of the terminal→P21
✔
INFORMATION
・
When handling docomo mini UIM card, take care not to touch
or scratch the metal part. Note that inserting docomo mini
UIM card forcibly into the terminal may damage docomo
mini UIM card.
・
For removing/inserting the tray from/into the docomo mini
UIM card slot, do not remove or insert forcibly. Doing so may
damage the tray.
Corner cut
IC
Tab
Slot cap
・
IMEI plate with IMEI number and bar code printed is inserted
between microSD card slot and docomo mini UIM card slot.
Do not pull out the IMEI plate because it will be requested at
a DOCOMO-specified repair office when the terminal is
damaged etc. Please note the followings.
- If you pull out the IMEI plate accidentally, insert it.
- Do not pull out the IMEI plate forcibly because it may cause
damage.
- If you lost the IMEI plate, repairs may be refused.
◆
Security code for docomo mini UIM
card
Security code called as PIN code can be set in the docomo mini
UIM card. The code is set to "0000" at the time of subscription,
but you can change the number by yourself.→P134
27
Before using the terminal
Charging
❖
Precautions on charging
・
If you use applications while charging, it may take time to
complete charging or charging may not complete due to
drop-off of battery. It is not abnormality of the terminal.
・
It is normal for the terminal or AC adapter to become warm
while charging. When the terminal becomes warm, charging
may stop temporarily for the safety. When the terminal
becomes extremely hot, stop using immediately.
・
The following conditions will lead to a charging error and
the indicator LED turns off. Charging restarts when the
charging becomes possible.
- When the power voltage of the charger becomes out of
chargeable range
- When temperature of the internal battery or the terminal*
becomes out of chargeable range
*
When the temperature rises high, wait until the temperature is
dropped and then retry charging.
・
If charging takes for very long time, a charging error is
notified and the indicator LED turns off. Remove the
terminal from the charger and retry.
・
When power voltage of the internal battery is abnormal,
charging error occurs and the indicator LED flashes. Remove
the terminal from the charger, turn off the power, and then
contact "Repairs" on the last page of this manual (in
Japanese only) or DOCOMO-specified repair office.
・
When charging starts with the battery empty, the terminal
may not be immediately activated after turning the power
ON. In this case, charge the terminal while keeping it turned
OFF, and turn it ON after a while.
・
For charging time, see "Main specifications"→P186
❖
Internal battery life
・
The internal battery is a consumable part. Each time it is
charged, time available with each charging reduces. Talking
on the phone for a long time while charging may reduce the
internal battery lifetime.
・
You can check performance (charging ability) of the internal
battery from About phone.→P148
・
When a time available with each charging is reduced to
about a half from that of a new battery, replacement of the
internal battery is recommended because it is near the end
of life. For replacement of internal battery, contact "Repairs"
on the last page of this manual (in Japanese only) or
DOCOMO-specified repair office.
❖
Available charging adapter
For details, refer to the operation manual of AC adapter or DC
adapter.
AC Adapter 03 (optional)/AC Adapter 04 (optional)/AC
100V and 240V AC. AC adapters have a plug dedicated to
100V AC (for domestic use). When using AC adapters in the
range of AC 100V and 240V overseas, a conversion plug
adapter applicable to the country you are staying is
required. Also, do not charge the battery with a transformer
for overseas travel.
DC Adapter 03 (optional) :
28
Use for charging in a car.
Before using the terminal
Between
Loading...
+ 186 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.