Before using your terminal, or when necessary, read this
manual to ensure safe use and handling.
Learning operations
"
クイックスタートガイド
This guide provides information of parts names and
functions.
"Instruction Manual" application (e-manual)
(installed in the terminal) (in Japanese only)
This manual provides detailed information and operations of
the functions.
<Operation steps>
Manual]
When activating for the first time, follow the onscreen
instructions to download "Instruction Manual" application.
If you delete "Instruction Manual", you can access Google
Play
™
from Play Store to install again.
<Operation steps>
Search "
取扱説明書
取扱説明書
(Instruction Manual)"→[INSTALL]
"
(Quick start guide)" (included with
the terminal) (in Japanese only)
From the Home screen, →[Instruction
From the Home screen, [Play Store]
(Instruction Manual) F-05J" and select
→
"INSTRUCTION MANUAL" (PDF file)
This manual provides detailed information and operations of
the functions.
<From PC>
https://www.nttdocomo.co.jp/english/support/
trouble/manual/download/f05j/index.html
*You can download the latest information. The URL and
contents are subject to change without prior notice.
Viewing this manual
・
In this manual, "F-05J" mobile terminal is usually referred to
as "the terminal".
・
The images or illustration used in this manual are examples.
They may differ from the actual displays.
・
In this manual, explanations and screen images for terminal
color "Red", "docomo LIVE UX" as Home application and
"Red" as Kisekae are provided.
・
In this manual, "authenticate" indicates the operating
procedure for entering security code or password
depending on functions.
・
Unauthorized copying of parts of or this entire manual is
prohibited.
・
The contents in this manual, URL and contents are subject to
change without prior notice.
Basic package
■
F-05J (with warranty)
■クイックスタートガイド
Japanese only)
ご利用にあたっての注意事項
for use) (in Japanese only)
・
You can check or purchase optional accessories compatible
with the terminal (optional) in the DOCOMO online shop.
https://www.mydocomo.com/onlineshop/options/
index.html (In Japanese only)
Index ................................................................................202
4
Contents/Precautions
Before using the terminal
・
This terminal supports LTE, W-CDMA, GSM/GPRS, Wireless
LAN System.
・
Since the terminal uses wireless signal, it may not be able to
use in a location with no signal reception such as a tunnel,
underground, a building, an outdoor location with weak or
poor signal reception, or a location outside of the LTE and
FOMA service areas. Even when you are high up in a tall
building or condominium and nothing blocks your view
outside, your terminal may not be able to receive or transmit
signals. Also, communication may be interrupted even
when there are strong radio waves with 4 signal status icons
on the terminal and you are not moving (traveling).
・
Because your terminal uses radio waves to communicate, it
is possible that a third party may attempt to tap your calls.
However, the LTE, W-CDMA, GSM/GPRS automatically
applies a confidential communication function to all calls, so
even if a third party could somehow tap a call, they only hear
noise.
・
Your terminal encodes voice communication as digital data.
When you are operating your terminal while moving to a
location subject to weaker radio wave conditions, the
transmitted digital data may not be correctly decoded and as
a result the decoded voice may differ somewhat from the
actual voice.
・
Since the terminal has the function that allows users or
guests to use the terminal, depending on the service or
application, you may be regarded as the same person after
changing users.
Note that DOCOMO assumes no responsibility for any
damage or trouble to you or a third party resulting from
using the function.→P140
・
Maintain a separate record of the data saved in the terminal
by taking notes periodically or saving in the external
memory such as a microSD card or PC. Note that DOCOMO
assumes no responsibility for any loss of saved contents of
data resulting from malfunction, repair, changing of the
model or other handling of the terminal.
・
In the terminal, as it is for a PC, some applications that you
install or Web sites that you access may give instability of
the operation, or may send your location information or
personal information registered to the terminal to outside
via the Internet and the information may be used
improperly. Please thoroughly check a provider and
operation status of the application etc. which you want to
use beforehand and then use it.
・
This terminal supports FOMA Plus-Area and FOMA HIGHSPEED Area.
・
The terminal does not support i-mode sites (programs) or
i-
α
ppli.
・
You can use the terminal only with a docomo nano UIM
card. If you have a docomo mini UIM card, docomo UIM
card, or FOMA card, bring it to a docomo Shop to replace it
with a docomo nano UIM card.
・
Public mode (Driving mode) is not supported.
5
Contents/Precautions
・
Regardless of Manner mode setting, shutter sound,
shooting start/end sound, auto focus lock sound, count
down sound for self-timer, screen shot sound while the
camera is activated, capturing sound for Capture & Draw/
Highlight & Copy, and Find Me Ringtone for Bluetooth Low
Energy Settings are emitted.
・
You can check your phone number (own number) operate
from the Home screen, →[Settings]→[System]→[About
phone]→[Status]→[SIM status] and see "My phone
number".
・
The terminal automatically performs communication for
synchronizing data, checking the latest software version,
and maintaining a connection with the server, and for other
purposes. If you transmit a large amount of data, such as
when downloading applications or watching video, the
packet communication charge becomes high. Subscription
to Packet Pack/packet flat-rate service is highly
recommended.
・
Depending on the applications or service you use, packet
communication charge may be applied even in Wi-Fi
communication.
・
The software on the terminal can be updated with the latest
information.→P187
・
Improving the terminals quality or upgrading operation
system may be included in the software update. And some
applications used in the previous version may not be
available or some unintended bugs may occur after
software update.
・
Display is manufactured by taking advantage of highly
advanced technology but some dots may be always or never
lit. Note that, this shows characteristics of liquid crystal
displays and not defects in the terminals.
・
For commercially available option devices, DOCOMO is not
liable to any failures or the malfunctions.
・
When the memory space of the microSD card or the terminal
is low, running applications may not operate normally. In
this case, delete the saved data.
・
Applications and service contents are subject to change
without prior notice.
・
To use the third parties' services and applications including
applications provided by Google Inc., refer to the terms of
use of Google Inc. or the corresponding provider. DOCOMO
assumes no responsibility for any malfunctions resulting
from the services and applications.
・
When the terms of use screen appears, follow the onscreen
instructions.
・
If you have lost your terminal, change your account
passwords using a PC to prevent others from using your
Google services such as Gmail™ and Google Play, SNS, and
other services.
・
Set the security unlock method to ensure the security of your
terminal for its loss.→P145
・
The terminal supports only sp-mode, mopera U and
Business mopera Internet. Other providers are not
supported.
・
If you want to use tethering, subscription to Packet Pack/
packet flat-rate service is strongly recommended.
・
For details on usage fee, refer to NTT DOCOMO website.
6
Contents/Precautions
Precautions (Always follow
these directions)
・
Before using your terminal, or when necessary, read the
precautions below to ensure safe use and handling.
・
These precautions are intended to protect you and others
around you. Read and follow them carefully to avoid injury,
damage to the product or damage to property.
・
The signs below differentiate between the levels of danger
that can occur if the product is not used within the specified
guidelines.
This sign denotes that "death
DANGER
WARNING
CAUTION
*1
Serious injury: This refers to loss of sight, injury, burns (highand low-temperature), electric shock, broken bones, injuries
with residual aftereffects from poisoning, etc., and injuries
requiring hospital admission for treatment or long term hospital
attendance as an outpatient.
or serious injury
directly result from improper
use".
This sign denotes that "death
or serious injury
result from improper use".
This sign denotes that "minor
injury
property
improper use".
(*2)
or damage to
(*3)
may result from
(*1)
(*1)
may
may
*2
Minor injury: This refers to injuries, burns (high- and lowtemperature), electric shock, etc. that do not require hospital
admission for treatment or long-term hospital attendance as an
outpatient.
*3
Physical damage: This refers to extended damage to buildings,
furniture, livestock, pets, etc.
・
The symbols below show specific directions.
Denotes things not to do (prohibition).
Don’t
This symbol denotes that disassembling the
phone or its components is not allowed.
No disassembly
This symbol denotes that using the phone or
its components in a bathroom or other highly
No liquids
humid area is not allowed.
This symbol denotes that using the phone or
its components with wet hands is not allowed.
No wet hands
Denotes mandatory instructions (matters that
must be complied with).
Do
This symbol denotes that the equipment
should be unplugged.
Unplug
7
Contents/Precautions
■
Precautions contain the description below.
Handling the terminal, adapter, and docomo nano UIM card
Use the optional products specified by NTT
DOCOMO for your cellphone.
May cause fire, burns, injuries, electric shock.
Do
WARNING
Do not drop, trample, or throw the terminal or
give a strong force or vibration to it.
May cause fire, burns, injuries, electric shock.
Don’t
Keep conductive materials (metal pieces, pencil
lead, etc.) from coming in contact with the
charging jack or external connection jack, or dust
Don’t
into the terminal.
May cause fire, burns, injuries, electric shock.
Do not cover or wrap the terminal with a blanket
etc. while using or charging.
May cause fire or burns.
Don’t
If charging is not complete after the specified
charging time has passed, stop charging.
Not doing so may cause fire, burns, or injuries due to
Do
overcharge.
Make sure to turn off the terminal or stop
charging before you get close to places like a gas
Do
station where a flammable gas or dust can be
generated.
Not doing so may cause the gas to ignite or fire.
When using Osai fu-Keitai in a plac e such as a gas st ation,
turn OFF the terminal before using it (When NFC/OsaifuKeitai lock is activated, deactivate it before turning OFF the
terminal).
If the equipment gives off a strange smell, noise,
smoke, or overheats or becomes discolored or
Do
deformed during use, charge, or storage,
perform the following operations.
・
Remove the power plug from the wall outlet or
accessory socket.
・
Turn the terminal OFF.
Failure to do the above operations may cause fire, burns,
injuries, or electric shock.
CAUTION
Do not use the damaged terminal.
May cause fire, burns, or injuries.
Don’t
Do not leave the terminal on unstable or sloping
surfaces. Be careful especially while the vibrator
is set.
Don’t
The equipment may fall and cause injuries.
9
Contents/Precautions
Do not store the equipment in extremely humid,
dusty or hot areas.
May cause fire, burns, electric shock.
Don’t
For the waterproof and dustproof functions, refer to the
following.
When children use the terminal, do not let them
use incorrectly without instruction by an adult
for proper use.
Don’t
May cause injuries.
Do not store the terminal within the reach of
small children.
Failure to do so may cause accidental ingestion, injury, or
Don’t
electric shock.
Be careful when using the terminal continuously
for a long time or charging as it gets hot. Also,
Do
avoid touching the terminal for a long time by
falling asleep unintentionally.
If you use applications, talk on the phone, 1Seg, or watch
videos for a long time or while charging the battery, the
terminal and adapt er may become hot. Directly touch ing a
hot part for a long time, you may have redness, itching or
rash on your skin, or it may result in low-temperature
burns depending on your constitution and/or health
condition.
◆
Handling the terminal
DANGER
Do not throw the terminal into fire or apply heat.
May cause fire, burns, or injury due to ignition, rupture,
overheat, or leak of the internal battery.
Don’t
Do not put excessive force such as sticking a nail
into the terminal, hitting it with a hammer, or
stepping on it.
Don’t
May cause fire, burns, or injury due to ignition, rupture,
overheat, or leak of the internal battery.
If the internal substance of the terminal contacts
your eyes or mouth, immediately rinse your eyes
Do
with clean water and see a doctor right away.
Failure to do so may cause blindness, medical problem,
etc. due to effects of the internal substance of the terminal
etc.
WARNING
Do not turn on or flash the light with the lighting
part close to person's eye. Keep enough distance
especially from small children.
Don’t
May impair eyesight. And may cause accidents like injury
etc., by dazzling or astounding other people.
Do not turn on or flash the light towar d drivers of
cars, etc.
May disturb driving and cause an accident, etc.
Don’t
10
Contents/Precautions
Do not watch the display that blinks repeatedly
for a long time.
May cause spasm, loss of consciousness, etc.
Don’t
Do not put foreign objects such as liquid like
water (drinking water, perspiration, seawater,
urine of pet animals, etc.), metal pieces or
Don’t
burnable things into the docomo nano UIM card/
microSD card slot.
Insert the docomo nano UIM card or the micro SD
memory card in the correct place and in correct
direction.
May cause fire, burns, injuries, or electric shock.
Do not expose the camera lens to direct sunlight
for an extended period.
May cause fire, burns, injuries, etc. by the light-collecting
Don’t
mechanism of the lens.
Turn off the terminal or put it in Airplane mode
before boarding an airplane.
The use of mobile phones on airplanes is restricted. Follow
Do
the instructions of each airline.
Failure to do so may cause on-board electronic equipment
to fail or malfunction.
Prohibited acts related to mobile phone usage on an
airplane may be punished by law.
Follow the instructions of each medical facility
for the use of mobile phones on their premises.
Turn off the terminal in a place where the use is prohibited.
Do
Failure to do so may cause electronic equipment or
electronic medical equipment to fail or malfunction.
When using the handsfree call, ringtone is
ringing loud, or in the standby mode, be sure to
Do
keep this terminal off of the ears.
Also, when playing games, video, or music with
an earphone microphone connected to the
terminal, adjust the volume to the proper level.
Loud sound is emitted from the terminal when calling wi th
hands-free set.
Even in standby mode, a ringtone or an alarm sound may
sound suddenly.
Setting too loud a volume or using the earphone
continuously for a long period of time might adversely
affect your ears. And, if you cannot hear the sound around
you clearly, it may cause an accident.
If you have weak heart, be careful when setting
the incoming vibrate alert (vibration) or alert
Do
volume setting.
Failure to do so may cause harmful effect on heart.
When you use electronic medical equipment,
check with the equipment manufacturer to
Do
determine how the device is affected by radio
waves before using.
Failure to do so may cause harmful effect on electronic
medical equipment etc.
11
Contents/Precautions
Turn the terminal OFF near high-precision
electronic control equipment or electronic
Do
equipment using low-power signals.
Failure to do so may cause the equipment to fail or
malfunction.
Examples of electronic equipment to avoid
*
Hearing aids, implanted pacemakers or d efibrillators, other
electronic medical equipment, and other au tomatic control
equipment. Users wearing implanted pa cemakers or
defibrillators, or other electronic medi cal equipment should
check with the manufacturer or sales outlet about the effect of
radio frequencies on the equipment.
When the display or camera lens is accidentally
broken, be careful of broken glass or exposed
Do
internal parts of the terminal.
If you mistakenly touch broken or exposed parts, you may
have burns, injuries, or electric shock.
If the internal battery leaks or gives off a strange
smell, immediately remove the terminal from the
Do
vicinity of open flames.
The vapors from leaking battery fluid may ignite, fire or
explode.
Be careful not to let your pet bite the terminal.
Failure to do so may cause the internal battery to ignite,
burst, heat, or leak, resulting in fire, burns, or injuries.
Do
CAUTION
Do not swing the terminal around by holding
antenna cable, strap, etc.
May cause an accident such as injury to yourself or others,
Don’t
or damage to surrounding objects by hitting.
When using the motion sensor, check the safety
around you, hold the terminal firmly, and do not
shake it unnecessarily.
Don’t
May cause accident such as injuries.
If the display breaks and the fluid etc. leaks out
from inside, do not let the fluid contact with the
skin on your face or hands or clothes.
Don’t
May cause eye or skin problems.
If the fluid etc. enters your eyes or mouth, or contacts skin
or clothes, immediately flush the contacted area with clean
water.
If the fluid etc. enters your eyes or mouth, immediately see
a doctor after flushing.
Do not discard the old terminal together with
other garbage.
May cause ignition resulting in fire, burns, or injuries.
Don’t
Also, may cause environmental destruction. Bring them to
a sales outlet such as docomo Shop. If your local
municipality has a battery recycling program, dispose of
them as provided for.
12
Contents/Precautions
If fluid etc. leaks out from the internal battery, do
not let the fluid contact with the skin on your
face or hands.
Don’t
May cause eye or skin problems.
If the fluid etc. enters your eyes or mouth, or contacts skin
or clothes, immediately flush the contacted area with clean
water.
If the fluid etc. enters your eyes or mouth, immediately see
a doctor after flushing.
To use the terminal in car, check with automobile
manufacturer or dealer to determine how the
Do
device is affected by radio waves before using.
In rare cases, using the phone in some vehicle models can
cause the vehicle's electronic equipment to malfunction. In
that case, stop using the terminal immediately.
If you develop skin problems, stop using the
terminal immediately, and see a doctor. The use
Do
of the terminal may cause itching, rashes,
eczema, or other symptoms depending on the
user’s physical condition.
For materials of parts, refer to the following.
→
P16"Material list"
Make sure that there is no adhered metal pieces
(cutter blade, staples, etc.) to the terminal
Do
because the part which is generating the
magnetism is used for the out-camera part and
the earpiece/speaker part.
Not doing so may cause injuries, etc. due to adhered
objects.
When watching the display screen, keep a
certain distance from the display in a fully bright
Do
place.
Not doing so may reduce visual acuity.
Stow the 1Seg antenna when not using 1Seg.
When you call etc. with the 1Seg antenna extended, it may
cause accident such as injury to yourself or others by
Do
hitting.
◆
Handling the adapter
Do not use the adapter cord if it gets damaged.
May cause fire, burns, electric shock.
Don’t
Do not use the adapter in a bathroom or other
highly humid area.
May cause fire, burns, electric shock.
Don’t
Always use the DC adapter with a negativeground vehicle. Do not plug it into a positiveground vehicle.
Don’t
May cause fire, burns, electric shock.
When it starts to thunder, do not touch adapter.
May cause electric shock.
Don’t
Do not short the charging terminal while it is
connected to an outlet or accessory socket. Do
not touch the charging terminal with a part of
Don’t
your body such as your hand or finger.
May cause fire, burns, electric shock.
13
WARNING
Contents/Precautions
Do not place heavy objects on the adapter cord,
or do not pull the cord with excessive force.
May cause fire, burns, electric shock.
Don’t
When you insert and remove the AC adapter
from power outlet, do not contact a metal strap
or other metal objects with the jack.
Don’t
May cause fire, burns, electric shock.
Do not use a transformer for overseas travel
(travel converter) as the AC adapter.
May cause fire, heat, electric shock.
Don’t
Do not put an excessive force up, down, left or
right to the adapter connected to the terminal.
May cause fire, burns, injuries, electric shock.
Don’t
Do not touch the adapter cord, charging
terminal, or power plug with wet hands.
May cause fire, burns, electric shock.
No wet hands
Only use with the specified power source and
voltage. When charging the terminal overseas,
Do
use AC adapter for global use.
If incorrect voltage is used, this may cause fire, burns or
electric shock.
AC adapter : 100V AC (Connect to the AC outlet for internal
household use)
AC adapter for global use : Between 100V and 240V AC
(Connect to the AC outlet for internal household use)
DC adapter : 12V or 24V DC (specific for negative ground
vehicle)
When replacing the DC adapter's fuse, replace it
only with a specified fuse.
Replacing with a different type of fuse might cause fire,
Do
burns, electric shock, etc. For the specified fuse, see the
provided instruction manual.
Wipe off any dust that accumulates on the power
plug.
Failure to do so may cause fire, burns or electric shock.
Do
When you connect the adapter to an outlet or
accessory socket, firmly connect it to the outlet.
Failure to do so may cause fire, burns, electric shock.
Do
When you disconnect the power plug from an
outlet or accessory socket, do not pull the
Do
adapter cord with excessive force. Instead, hold
the adapter to disconnect.
Failure to do so may cause fire, burns, electric shock.
When you remove or insert the adapter from/to
the terminal, do not pull the adapter cord with
Do
excessive force. Instead, remove or insert the
adapter straight.
Failure to do so may cause fire, burns, injuries, electric
shock.
Immediately stop using the terminal if the
external connection jack is deformed. Do not use
Do
it by restoring the deformation.
Use of deformed charging jack may cause fire, burns,
injuries, or electric shock due to short circuit of the
charging terminal.
14
Contents/Precautions
Always remove the power plug of the adapter
from an outlet or accessory socket when not
Unplug
using the adapter.
Failure to do so may cause fire, burns, or electric shock.
Immediately remove the power plug from the
outlet or accessory socket if water or other fluids
Unplug
(drinking water, perspiration, seawater, urine of
pet animals, etc.) get into the adapter.
May cause fire, burns, electric shock.
Always remove the power plug from an outlet or
accessory socket when cleaning the equipment.
Not doing so may cause fire, burns, or electric shock.
Unplug
CAUTION
Do not touch the adapters for a long time while
they are connected to an outlet or accessory
socket.
Don’t
May cause burns.
◆
Handling the docomo nano UIM card
CAUTION
Be careful of the cut surface when handling a
docomo nano UIM card as it may damage a part
Do
of your body such as fingers, etc.
Failure to do so may cause injuries.
◆
Handling mobile phones near electronic
medical equipment
WARNING
Wearers of medical equipment such as
implanted pacemakers or defibrillators must
Do
carry and use the terminal at least 15 cm away
from the implanted device.
The terminal's signals may affect the performance of
electronic medical equipment.
When electronic medical equipment other than
implanted pacemakers or defibrillators are in use
Do
outside of medical facilities (such as in home care
settings), check with the device manufacturer to
determine how the device is affected by
electrical signals.
The terminal's signals may affect the performance of
electronic medical equipment.
Make sure that the terminal will not emit any
signals (turn off power, put it in Airplane mode,
Do
etc.) if within 15 cm of those around you, such as
where crowded and you cannot move freely.
There may be wearers of medical equipment such as
implanted pacemakers or defibrillators around you. The
terminal's signals may affect the performance of electronic
medical equipment.
When using the terminal in a medical facility, be
sure to observe the regulations of the facility.
Not doing so may affect the performance of electronic
External connection jack Stainless steel/Tin plating
16
PET/None
POM resin/None
Contents/Precautions
Handling precautions
◆
General
・
F-05J is waterproof/dustproof; however, do not allow
water (drinking water, perspiration, seawater, urine of pet
animals, etc.) or dust to enter this terminal or come in
contact with optional accessories.
- The adapter and docomo nano UIM card do not have
waterproof/dustproof function. Do not use them in places
with high humidity such as a bath or where rain may get it
wet. If you carry the terminal close to your body, moisture
from sweat may corrode the internal parts causing a
malfunction. Note that malfunctions deemed to be caused
by water are not covered by the warranty or impossible to
repair. For repairs, contact "Technical Inquiries & Repairs"
(in Japanese only) on the last page of this manual or
DOCOMO specified repair office.
・
Clean the terminal with a dry soft cloth (such as a cloth for
eyeglasses).
- Rubbing it roughly with a dry cloth may scratch the
display.
- Drops of water or dirt left on the display may cause stains.
- If the terminal is wiped with alcohol, paint thinner, benzine
or detergent, the printing may disappear or color may
fade.
・
Clean the jack occasionally with a dry cotton swab etc.
- If the jack etc. is dirt, you may not use the terminal
normally.
Also, be careful never to damage the jack when cleaning it.
・
Do not place the terminal near an air-conditioner outlet.
- The rapid change in temperature may cause condensation,
causing internal corrosion and malfunction.
・
Do not apply excessive force to the terminal.
- Putting the terminal into a tightly packed bag or sitting on
the terminal in your pocket might damage the display or
internal circuit board resulting in a malfunction. Also,
keeping an external device connected to the external
connection terminal might damage the connector
resulting in a malfunction.
・
Use the optional products specified by NTT DOCOMO for
your terminal.
- If you use optional products other than specified, it may
cause malfunction or damage.
・
Read the instruction manuals supplied with individual
optional devices.
・
Do not drop the terminal or subject it to shocks.
- May cause malfunction or damage.
◆
The terminal
・
Do not press the display strongly, or not operate with a
sharp-pointed objects.
- The display may be scratched and may cause malfunction
or damage.
・
Avoid extreme temperature.
- Use the terminal where the temperature ranges between 5
and 40
℃
(limited to the temporary use in a bathroom etc.
when temperature is above 36℃) and humidity ranges
between 45 and 85%.
・
The terminal may affect land-line phones, TVs or radios in
use nearby, so use it as far as possible from these
appliances.
17
Contents/Precautions
・
Be sure to back up the data you saved in the terminal on a
microSD card, PC or cloud service, or keep a separate note.
- If the data is deleted, DOCOMO assumes no responsibility
for the loss of any data.
・
Do not plug external devices into the external connection
jack at a slant, or do not pull it forcibly while it is plugged.
- May cause malfunction or damage.
・
It is normal for the terminal to become warm during use or
charging. Continue to use it.
・
Do not leave the lens of the camera under strong direct
sunlight.
- May cause discoloring or burn-in of elements.
・
Use the terminal with the slot cap closed.
- Not doing so may cause malfunction due to entering
foreign objects such as liquid like water (drinking water,
perspiration, seawater, urine of pet animals, etc.) or dust to
the terminal.
・
While microSD card is being used, do not take the card out
or do not turn off the terminal.
- May cause data loss or malfunction.
・
Do not bring magnetic cards or magnetic objects close to
the terminal.
- Magnetic data in cash cards, credit cards, telephone cards,
floppy disks, etc. may be erased.
Also, bringing strong magnetism close may cause a
malfunction of the terminal.
・
Do not decorate the terminal with a film or stickers.
- May cause an abnormal operation of the function using
the proximity sensor.
- For the position of the proximity sensor, refer to the
following.
→
P29 "Part names and functions"
・
The internal battery is a consumable part and out of the
warranty.
- The internal battery may swell as the battery life draws to
a close depending on the usage conditions.
It is time to replace the internal battery when the usage
time has become extremely short even though it has been
fully charged or when the internal battery is swollen. For
replacement of the internal battery, contact "Technical
Inquiries & Repairs" (in Japanese only) on the last page of
this manual or DOCOMO specified repair office.
・
Charge the battery in an area within the proper ambient
temperature range (5-35
・
The operation time provided by the internal battery varies
by the operating environment and internal battery
deterioration.
・
When storing the terminal, avoid the following conditions
since they deteriorate the performance or the battery life of
the internal battery.
- Storing under the state of the full charge (right after
charging ends)
- The battery has run out (the terminal cannot be turned on)
Approximately 40% of remaining battery level is
recommended to store the terminal as a guide.
・
The terminal has the following type of internal battery.
DisplayBattery type
Li-ion 00Li-ion battery
℃
).
18
Contents/Precautions
◆
Instructions for using the adapter
・
Charge the battery in an area within the proper ambient
temperature range (5-35
・
Do not charge the battery in the areas below.
- In areas of excessive humidity, dust or vibrations
- Near land-line phones or TV/radio
・
It is normal for the adapter to become hot while charging.
Continue to use it.
・
When using the DC adapter for charging, keep the vehicle
engine running.
- The vehicle's battery could become flat.
・
When using an outlet with a mechanism preventing
unplugging, follow the handling instructions for that outlet.
・
Do not give strong shock. Do not deform the charging jack.
- May cause malfunction.
◆
docomo nano UIM card
・
Do not use excessive force to install/remove docomo nano
UIM card.
・
Note that DOCOMO assumes no responsibility for
malfunctions occurring as the result of inserting and using
docomo nano UIM card with another IC card reader/writer.
・
Always keep UIM IC's clean by cleaning occasionally.
- If you use the docomo nano UIM card with the IC soiled, it
may hinder properly operations.
・
Clean docomo nano UIM card with a soft, dry cloth (such as
a cloth for eyeglasses).
℃
).
・
Be sure to back up the data you saved in the docomo nano
UIM card to the microSD card, a PC or a cloud service, or
keep a separate note.
- If the data is deleted, DOCOMO assumes no responsibility
for the loss of any data.
・
Take an expended docomo nano UIM card to a sales outlet
such as a docomo Shop for proper disposal in order to
protect the environment.
・
Take care not to scratch, touch accidentally or short IC.
- May cause data loss or malfunction.
・
Do not drop a docomo nano UIM card or subject it to
impact.
- May cause malfunction.
・
Do not bend a docomo nano UIM card or place a heavy
object on it.
- May cause malfunction.
・
Do not install docomo nano UIM card into the terminal with
a label or sticker put on.
- May cause malfunction.
19
Contents/Precautions
◆
Bluetooth function
・
This terminal is equipped with the security features, that
are compliant with Bluetooth standards for communication
via Bluetooth. However, depending on the settings, there
may not be enough security. Be aware of security risks
when using Bluetooth.
・
DOCOMO assumes no responsibility for any information
which may be leaked during communication via Bluetooth.
・
Frequency bands
Frequency bands used by the terminal Bluetooth function
are as below.
abdc
2.4FH/XX1
a
2.4 : Radio equipment that uses the 2400 MHz band.
b
FH/XX : The modulation is the FH-SS method or other
method (method other than DS-SS method/DS-FH
method/FH-OFDM composite method/OFDM method).
c
1 : The expected interference distance is 10 m or shorter.
d
2483.5 MHz are used, and the bandwidth used by mobile
object identification devices cannot be avoided.
Use of Bluetooth function is limited in some countries.
Confirm regulations of the country/region to use it.
To use in airplane, confirm with airline company in advance.
: All bandwidths between 2400 MHz and
Cautions on using Bluetooth devices
In the bandwidth used by this terminal, in addition to
home electric appliances such as a microwave oven and
industrial/scientific/medical devices, in-plant radio
stations used to identify mobile objects used in
production lines of a factory that require a license,
specified low power radio stations, or amateur radio
stations that do not require a license (hereafter "other
radio stations") can be in operation.
1. Before using the terminal, check whether "other radio
stations" are in operation in your neighborhood.
2. If radio wave interference occurs between the terminal
and "other radio stations", use the terminal in a
different location or "Turn the power OFF" to avoid the
radio wave interference.
3. For details, contact "General Inquiries" on the last page
of this manual.
20
Contents/Precautions
◆
Wireless LAN (WLAN)
・
Wireless LAN (WLAN) exchanges information using radio
waves, and allows you to freely establish LAN connection if
you are within an area where radio wave reaches. On the
other side, if you communicate without appropriate
security settings, communications may be intercepted or
hacked by malicious parties. It is recommended to make
necessary security settings on your judgment and
responsibility.
・
Wireless LAN
Do not use wireless LAN in a place where magnetized by
electric products, AV, OA equipment, etc. or where
electromagnetic wave is generated.
- If magnetism or electrostatic noise affects the terminal,
noise may be increased or communication may not be
available (especially when using microwave oven, it may
affect the terminal).
- Using near TV or radio may cause poor reception or TV
screen may be blurred.
- When multiple wireless LAN access points exist near the
terminal and they use the same channel, search may not
be performed correctly.
・
Frequency bands
Frequency bands used by the terminal wireless LAN
function are as below.
a bc
d
2.4DS/OF4
a
2.4 : Radio equipment that uses the 2400 MHz band.
b
DS : The modulation is the DS-SS method.
c
OF : The modulation is the OFDM method.
d
4 : The expected interference distance is 40 m or shorter.
e
2483.5 MHz are used, and the bandwidth used by mobile
object identification devices can be avoided.
Available channels vary by countries. To use WLAN
overseas, check the conditions such as available frequency,
regulation, etc. for the country.
To use in airplane, confirm with airline company in advance.
When docomo nano UIM card is not inserted or when you
are out of service area, channels 12, 13 of 2.4 GHz band and
channels between 120 and 128 of 5 GHz band are not
available regardless of whether you are in Japan or abroad.
e
: All bandwidths between 2400 MHz and
21
Contents/Precautions
Cautions on using 2.4 GHz devices
In the frequency band used by WLAN devices, in addition
to home electric appliances such as a microwave oven
and industrial/scientific/medical devices, in-plant radio
stations for identification of mobile objects used in
production lines of a factory (a license is required),
specified low power radio stations (a license is not
required), or amateur radio stations (a license is required)
can be in operation.
1. Before using this device, confirm that in-plant radio
stations for identification of mobile objects, specified
low power radio stations or amateur radio stations are
not in operation in your neighborhood.
2. If this device generates harmful radio wave
interference against in-plant radio stations for
identification of mobile objects, change the using
frequency promptly or stop using wireless LAN
function, and contact "General Inquiries" on the last
page of this manual, then consult about treatment for
prevention of the interference (for example, installation
of partitions etc.).
3. If this device generates harmful radio wave
interference against in-plant radio stations for
identification of mobile objects or amateur radio
stations, or if any trouble, contact "General Inquiries"
on the last page of this manual.
Cautions on using 5 GHz devices
Using wireless LAN built-into the terminal in 5.2/5.3 GHz
outside is prohibited by the Radio Law.
Channel numbers and frequency bands available in Japan
are as follows.
・
5.2 GHz band : 5,180 to 5,240 MHz (36, 38, 40, 44, 46, 48
Ch)
・
5.3 GHz band : 5,260 to 5,320 MHz (52, 54, 56, 60, 62, 64
Ch)
FeliCa and NFC reader/writer and P2P function of the
terminal uses weak waves requiring no licenses for radio
stations.
・
It uses 13.56 MHz frequency band. When using other
reader/writer or P2P function in your surroundings, keep
the terminal away sufficiently from them. Before using,
confirm that there are no radio stations using the same
frequency band nearby.
・
To use in airplane, confirm with airline company in advance.
Use is limited in some countries.
Confirm regulations of the country/region to use it.
22
Contents/Precautions
◆
CAUTION
・
Do not use a remodeled terminal. Using a remodeled
terminal violates the Radio Law/Telecommunications
Business Act.
The terminal is compliant with rules on the technical
standard conformance of specified wireless equipment
based on the Radio Law/Telecommunications Business Act,
and as a proof of it, the "Technical Compliance Mark " is
depicted on the electronic nameplate of the terminal. You
can check the electronic nameplate in the terminal as
follows.
From the Home screen, →[Settings]→[System]→[About
phone]→[Auth]
If you remodel the terminal by removing its screws, your
certification of technical standard conformance becomes
invalid.
Do not use the terminal with its certification of technical
standard conformance invalid as it violates the Radio Law/
Telecommunications Business Act.
・
Be careful when you use the terminal while driving a car etc.
There is a penalty for holding or using the terminal while
driving.
However, absolutely necessary cases such as rescue of a
sick person or maintaining public's safety are exempted.
・
FeliCa and NFC reader/writer function of the terminal
conforms to Japanese radio standards. If you use the
function overseas, confirm regulations of the country/
region beforehand.
・
Do not alter the basic software.
Repairs may be refused as a modification of software.
Waterproofness/Dustproofness,
shock resistance
F-05J has a waterproof equivalent to IPX5*1 and IPX8*2, as
well as a dustproof property equivalent to IP6X*3 on the
condition that the slot cap is securely attached. Also, the
terminal comprises the shock resistant structure which
passed the test*4 in accordance with United States Military
Standard.
*1
IPX5 means that a phone keeps functioning after applying a jet
flow of 12.5 L/min. from every direction from a distance of
approximately 3 m for at least 3 minutes using water nozzle in 6.3
mm inner diameter.
*2
For F-05J, IPX8 means that a phone keeps functioning after
F-05J is slowly submerged to depth of 1.5 m in static tap water at
room temperature, left there for 30 minutes and then taken out
(Camera function cannot be used under water).
*3
IP6X, a degree of protection, indicates that the phone can maintain
its functionality to prevent dust particles from entering into the
phone even when it has been shaken for 8 hours in an apparatus
containing dust particles 75
*4
Our drop test which is in accordance with MIL-STD-810G w/
Change1 Method 516.7-Shock established by the USA
Department of Defense is implemented.
Waterproofness
Immersion
Wind and
rain
μ
m or less in diameter.
Immersion test at the depth of 1.5
meters for 30 minutes
Rain test with wind speed of 18 m/s
for 30 minutes
23
Contents/Precautions
DustproofnessDust test for 6 hours consecutively
Shock resistanceDrop test from 1.22 meters height
Vibrating resistanceVibration test for 3 hours (1 hour
Solar radiation
resistance
DampproofnessHigh humidity test for 10 days
Thermal
durability
Low pressure
durability
(dust concentration of 10
wind speed of 8.9 m/s)
to plywood (lauan) in 26 directions
each in 3 directions)
Solar radiation test for 24 hours
consecutively (total 1,120 W/m
consecutively (95% of humidity,
30-60℃)
Operation at
Operation environment : High
high
temperature test at 60
temperature
Storage at
Storage environment : High
high
temperature test at 70
temperature
Operation at
Operation environment : Low
low
temperature test at -20
temperature
Storage at
Storage environment : Low
low
temperature test at -30
temperature
Storage
Low pressure test for 1 hour
at low
consecutively (57.11 kPa/Approx.
pressure
4,572 m)
Operation
Low pressure test for 1 hour
at low
consecutively (57.11 kPa/Approx.
pressure
4,572 m)
℃
℃
℃
℃
±
7 g/m3,
2
)
Salt water durabilitySalt water durability test for 96
Our tests which are in accordance with the procurement
standard of 14 provisions established by the USA Department
of Defense (MIL-STD-810G) are implemented: waterproof
(immersion, wind and rain), dustproof, shock resistant,
vibration resistance, solar radiation resistance, dampproof,
thermal durability (operation at high temperature, storage at
high temperature, operation at low temperature, storage at
low temperature), low pressure durability (storage at low
pressure, operation at low pressure), and salt water durability.
Performance of the terminal is confirmed at under the test
environment, it does not guarantee the operation of actual
use in every situation. Also, it does not guarantee the nondamage and trouble-free.
hours consecutively (2 cycles of 24
hours spraying of 5% salt water
and 24 hours drying)
24
Contents/Precautions
❖
What you can do with waterproofness of
F-05J
・
You can use the terminal to talk or watch 1Seg without
using an umbrella in the rain with a rainfall of about 20 mm
per hour.
- When your hands or the terminal are wet, avoid opening/
closing the slot cap.
・
The terminal can be washed with tap water at room
temperature.
- With holding the slot cap not to open, wash the terminal
with tap water without rubbing hard.
- Do not apply water flow stronger than allowed (→P23).
- Do not use brush, sponge, soap, detergent, etc.
- If mud or dirt has adhered to your terminal, shake it several
times in tap water put in a washbowl or other container to
rinse it off and then flush it with running water.
- Drain water in the specified steps (→P27) after washing.
・
You can use the terminal in a bathroom.
- Do not immerse the terminal into a bathtub. Also, do not
use the terminal in hot water. May cause malfunction. If
you should fall the terminal into the bathtub, immediately
pick it up to drain water in specified procedure (→P27).
- Never put the terminal in hot spring water or water
containing soap, detergent or bath powder. In case the
terminal gets wet with water other than tap water, wash it
in the procedure above.
- You can use the terminal within 2 hours in a bathroom
where the temperature ranges between 5 and 45
humidity ranges between 45 and 99%.
℃
- Rapid temperature change may cause condensation. If you
bring the terminal from a cold place to warm place such as
a bathroom, wait until the terminal reaches the room
temperature.
- Do not put hot water from a faucet or shower.
◆
To ensure waterproofness/dustproofness
To prevent water or dust from entering the terminal, be sure
to observe the following points.
・
When attaching or removing a docomo nano UIM card or
microSD card, put your fingertip in the groove and pull open
the slot cap in the directions indicated by the arrows (a).
After use, press it in the direction indicated by the arrows
(b, c) and close the cap securely in the direction indicated
by the arrows (d) while tracing it with a finger along. Ensure
that there are no gaps between the slot cap and the body.
and
Groove
d
c
a
b
25
Contents/Precautions
・
Make sure to firmly close the slot cap. Even a fine obstacle
(one hair, one grain of sand, tiny fiber, etc.) which is put
between contact surfaces may allow water or dust to enter.
・
Do not poke the stereo earphone jack, external connection
terminal, mouthpiece/microphone, earpiece/speaker, back
side microphone, slot cap, or other components with a sharp
object.
・
Do not let the terminal fall. Doing so may scratch the
terminal, causing its waterproof/dustproof performance to
degrade.
・
Rubber seal in the slot cap plays an important part in
waterproof/dustproof property. Do not damage or remove
the rubber seals. Also, prevent dust from adhering to them.
It is recommended to replace the parts once every two
years to maintain the waterproof/dustproof performance,
regardless of whether an abnormality is present. Upon
request, DOCOMO will replace the parts for a fee. Take
your terminal to a sales outlet such as a DOCOMOspecified repair office.
◆
Important precautions
Do not perform actions shown in the illustrations below.
<Example>
Using Soap/Detergent/
Bath powder
Applying strong
water flow
Observe the following precautions to use the terminal
properly.
・
The optional accessories are not waterproof/dustproof. Do
not use the terminal with the AC adapter is connected to its
external connection jack in a location exposed to water, such
as a bathroom, shower room, kitchen, or lavatory.
・
Do not apply water flow stronger than allowed (→P23). Even
if the F-05J is waterproof in IPX5 waterproof, water may
enter inside from a damaged section and cause troubles
such as electric shocks or corrosion of the battery.
・
If the terminal gets wet with salt water, sea water, refreshing
beverage, etc. or mud or soil adhered, wash it immediately.
If they dry out, it is hard to remove the dirt and it may cause
damage or malfunction.
・
Do not put the terminal in hot water, use it in a sauna or
apply hot airflow (from a hair dryer etc.) to it.
Washing with
brush/sponge
Soaking in
ocean water
Machine-washing
Using in
hot spring
26
Contents/Precautions
・
Do not move the terminal in water or slam the terminal
against the surface of water.
・
When you use the terminal in swimming pool, obey rules of
the facility.
・
The terminal does not float on water.
・
Do not leave water drop on the terminal. In a cold region,
may cause the water to freeze, resulting in a malfunction.
・
Do not leave water drop on the stereo earphone jack,
mouthpiece/microphone, earpiece/speaker, back side
microphone. Such water may interfere with talking.
・
Do not put water from a faucet directly to the external
connection jack.
・
Do not leave water drop on the external connection
terminal.
・
If the terminal gets wet with water or other liquids with the
slot cap open, the liquid may get inside the terminal and
cause electric shocks or malfunction. Stop using the
terminal, turn the power OFF and contact a DOCOMOspecified repair office.
・
If the rubber gasket of slot cap is damaged or deformed,
replace it at DOCOMO-specified repair office.
DOCOMO does not guarantee actual operations under all
states. Malfunctions deemed to be caused by
inappropriate operation by the customer are not covered
by the warranty.
◆
Draining water
When the terminal is wet, water may flow out after wiping it
off; drain the water in the following steps.
a
Hold the terminal firmly and wipe off moisture on the
terminal surface and back side with dry, clean cloth etc.
b
Shake the terminal approximately 20 times, firmly holding
it, until there is no more water splattering.
27
Contents/Precautions
c
Swing the terminal about 10 times against a dry, clean
cloth etc. to wipe off any water remaining in the stereo
earphone jack, external connection terminal, mouthpiece/
microphone, earpiece/speaker, back side microphone, key,
1Seg antenna, etc.
d
Wipe off water drained from the terminal with dry, clean
cloth etc., and dry naturally.
・
Water, if any, remaining in the terminal may ooze up after
wiping off.
・
Do not wipe off the remaining moisture in the gaps
directly with a cotton swab etc.
◆
Charging
Check the following during and after charging.
・
Never try to charge the battery when the terminal is wet.
・
When charging the battery after the terminal gets wet,
adequately drain the terminal and then wipe off the
remaining water with a dry, clean cloth or something
similar.
・
Check if water or a foreign object is in the external
connection jack before use.
・
Do not use the AC adapter in a bathroom, shower room,
kitchen, lavatory or other highly humid area. May cause fire
or electric shock.
・
Do not touch the AC adapter with wet hands. May cause
electric shock.
28
Contents/Precautions
Loading...
+ 188 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.