DOALLTECH GATEWAREEM Users Manual

WokerWoker--Attandance Device of Construction SiteAttandance Device of Construction Site

Security Control Security Control

SystemSystem

GatewareGateware EMEM

ver. ver. ––1.01.0

User ManualUser Manual

GATEWARE-EM

Contents

n

g

y

g

18

5

5

User Manual

Doalltech

C
o

t

e

n

t

s

English

 Matters that require attention
 Product Explanation

1. Starting

 1. Check of the supply items
 2. Installation method
 3. Each part Name & Function of the Device

2. System settin

 Explanation of the Screen UI
 Explanation of the keypad control
 Menu Control - Enter
 Menu Control – Select the item
 Menu Control – Check the status
 Menu Control – Default setting
 Menu Control – Serial pot setting
 Menu Control – Relay setting
 Menu Control – Special setting
 LAN Setting
 USB setting
 Time setting
 Password setting

----------------- 3

----------------- 6

----------------- 7

----------------- 8

---- 9

---------------- 11

---------------- 12

---------------- 15

---------------- 16

---------------- 17

----------------

---------------- 19

---------------- 20

---------------- 21

---------------- 22

---------------- 23

---------------- 24

---------------- 2

2

3. Reference

 External Interlocking device – Turn-Gate
 External Interlocking device – Items
 Additional Function
 FAQ
 Before A/S Request
 Product Size
 FCC RF INTERFERENCE STATEMENT
 Additional charge item

--------- 26

-------------- 27

---------------- 28

---------------- 30

---------------- 32

---------------- 38

-------------- 39

GATEWARE-EM

Matt

–

Si

ly

g

g

ggppyygpy

Doalltech

W

ers that require attention

Sign explanation

 Please read this manual and keep the using method because for prot

ectin

warning

caution

 Power supply

warning

risks or damages on property by using the product correctly.

 This is composed of contents on the possibility of death or
serious wound in case of violating instructions.

 If violate the instruction, you are vulnerable to wounds or
occurrence of property loss.

gn explanation, Power supp

a

r

n

I

n

&

C

a

u

t

I
o
n

Reference

 Please plug into correct place

 In case of unstable situation, it causes fire or

electronic shock

 Don’t touch the Power supply with wet hand

 It causes fire or electronic shock

Theses images are just for reference. It can be different from real product appearance

English

3

GATEWARE-EM

Matters that require attention

g

W

a

r

Doalltech

n

I

n

&

C

a

u

t

I
o
n

warning

 Please don’t use a damaged plug or loose outlet

 It causes fire & electronic shock

 Please do not use a lot of plugs into one outlet.

 It causes a fire owing to abnormal heat of the

outlet.

English

4

Reference

 Don’t press the power line with heavy things
and bend forcibly or pull it.

 It causes fire & electronic shock

 When moving the product, please turn down

the switch certainly and then move it after taking
out external cable.

 It causes fire & electronic shock

Theses images are just for reference. It can be different from real product appearance

GATEWARE-EM

Matters that require attention

g

wet & keep away from water



Don t put the Power supply

device

or

Power

b

lit

caution

Doalltech

W

a

r

n

I

 Don’t make DC Power supply (Adapter) device

 It causes fire & electronic shock

’

supply wire around heater.

 It causes fire

 When you pull out Power supply plug, please

use only plug which is not wire. It causes wire
problem

n

&

C

a

u

t

I
o
n

English

 it causes power switch problem or fire

 when Thunderstorm or lightening situation,

please pull out the power supply plug

 It causes electric shock and fire appliances’ a

norma

Reference

Theses images are just for reference. It can be different from real product appearance

y.

5

GATEWARE-EM

Product summary



Real

time confirmation on the entry situation

y

yg



CCTV Camera, TV Monitor

humidity, wind direction, wind speed

etc

1. Summary

Doalltech

S

t

a

r
t

 The entry control management using RFID card.

 It stores output data of workers and has transm

itting function to remote- place server by using
network

2. Feature

 Photographing, external camera input, image o

utput, external RFID device input, external RS-2
32 device input, sensor input and relay output a
re available b
devices.

-

connecting with various external

English

6

3. Interlockable External device

 Turnstile Gate, Automatic door
 Crossing barrier,Eletric sign,Flash light and so on
 13.56 MHz RFID Reader
 Various Sensor like movement, temperature,

• Product appearance& specification can be changed for high quality improvement

Reference

GATEWARE-EM

d

1. Composition item check

r

Gateware EM Main body

Main body holder

A

v

.

p

e

p

a

r

Doalltech

a

t

I
o
n

s

English

Main body Adapter Main body Key

SD Memory USB Memory User Description

7

Reference

• Picture size of each item can be different from real product size,, Some part items

can be changed depending on the situation.

GATEWARE-EM

2. Installation

method

d

r

EX) In case of installing at gate guard post

③

Hang it by fitting back bolt of the equipment and fixing

Doalltech

A

v

①

②

Holder

③

Holder

.

p

e

p

a

r

a

t

I
o
n

s

Reference

Back of the

Gateware device

① Please confirm the installation position after matching up

per end of the fixing board and eye level of the worker.

② Please install the fixing board to installation position by

using steel plate screw.

hole.

Install to fix the holder

English

8

GATEWARE-EM

d

3. Each part

name & function

(Front)

r

7

A

v

Doalltech

p

e

p

a

a

o
n

s

.

FRONTFRONT

1

2

5

r

3

t
I

4

Each part name

Function

6

English

9

1.Camera

2.FLASH

3.LCD

4.RFID REGISTER

5.Status LED

6.KEY PAD

7. WIFI ANT.

This image is just for reference. So it’ can be different from real situation

Reference

Product appearance& specification can be changed for high quality improvement

When workers scan the card,it takes a photo

Flash is working as the Time zone of User setting for
card check

Camera view & Product status(Reference to 7page)

Card check part for worker attendance

LED shows depending on the Product status

Use Key pad when user set the product setting

WIFI Antenna is fixed.

GATEWARE-EM

3. Each part

name & function(Bottom)

d

r

p

BOTTOMBOTTOM

Doalltech

A

v

.

p

e

p

a

r

a

1234567 8 9

Each part name Function

1.ON/OFF

2.PWR

3.RESET

4.Screen in/output
terminal

5.SPEAKER output
terminal

6.SERIAL PORT

7.LAN PORT

8.Signal in/output
terminal

Product ON/OFF button

Connection terminal of Power supply Adapter

Product default setting

Installation pot of Additional camera
(Reference to 14page)

Installation pot of Additional speaker

(Reference to 14page)

Installation pot of Additional RFID READER
(Reference to 9, 14page)

Internet connection Pot

Installation Pot of RELAY,SENSOR
(Reference to 14page)

t

I
o
n

s

English

9.USB PORT

This image is just for reference. So it’ can be different from real situation

Reference

Product appearance& specification can be changed for high quality improvement

USB connection Pot

10

Doalltech

Screen

UI Explanation

I

2

③

In case of occurring power supply, network and other errors, th

–

Ch

ill b

S
c

r
e
e

n

U

1

GATEWARE-EM

5

6

7

3

4

① Company name, construction work, type of occupations, name

English

② The resident registration number is showed in case of setting k

④ Current year, month, day, day of the week are displayed
⑤ Current Time is displayed
⑥ USB Memory,SD Card Memory connection status are displayed
⑦ Power supply status is displayed

and information of the card number are marked after card rec
ognitions.

eypad input.

e contents will be appeared.

– During Menu setting mode, key pad instruction is displayed

arging quantity and using time w

mode.

e appeared in case of battery

8

11

Reference

This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement

GATEWARE-EM

Keypad control explanation

d

⑤

M

Th

Doalltech

K

e
y

p

a

C
o
n

Save

① MENU This displays button Menu.

② Setting Menu is displayed in the default screen. In t

he Setting menu, please move with the Save button

③ ESC This makes get out of current screen.

④ F1 This makes display Help word expressio

n or move previous screen.

– Usage method is marked at the message windo

ove to previous screen in Menu setting screen.
e focus moves to flash starting Time when located
at flash end Time.

MENU

ESC

F1

(HELP)

w where the Help word is required.

t
r

o

l

English

1

2

3

This image is just for reference. So it’ can be different from real situation

Reference

Screen & Menu function can be changed for high quality improvement

12

Doalltech

Keypad control explanation

d

nu selection page after saving data

132

K

e
y

p

a

C
o
n

GATEWARE-EM

t
r

o

l

English

Save

① SHIFT This makes the button to next stage.

– The focus moves to the position of flash end Ti

② DEL This deletes box contents of button text.

– When there is not contents to be deleted on the

③ ENT Input the figure of button selection.

– In the Save button, this makes movement to Me

SHIFT

me when locating in flash start Time. .

DEL

IP input text box, this makes movement to previ
ous text.

ENT

– In the list box, select previous item.

13

Reference

This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement

.

GATEWARE-EM

Keypad control explanation

d

Controlling Volume up & down

Doalltech

K

e
y

p

a

C
o
n

Save

① When inputting Keypad 1~0 in Menu setting

text box, you can input

② In main screen, Keypad 2,4 button :

③ In main screen, Keypad 4,6 button

Controlling Screen brightness

④ In project Code, Keypad 4,6 button 6

Changing English code.

8

2

4 6

4 6

t
r

o

l

English

– Number key 4 Changing English code A to B

– Number key 6 Changing English code A to Z

This image is just for reference. So it’ can be different from real situation

Reference

Screen & Menu function can be changed for high quality improvement

4

6

14

Doalltech

1. Menu setting

–

Enter the

Menu

t

②

②

E
n
v

i

r
o
n

.
S
e

GATEWARE-EM

t

i
n
g

English

① This is Main Screen. Camera image is

displayed

Push the MENU button

③ Password prompt is displayed

④ After pushing the Password + ENTER ,

you can see the Product setting Menu

MENU

ENT

This image is just for reference. So it’ can be different from real situation

15

Reference

Screen & Menu function can be changed for high quality improvement

* Password The first password is ‘0000’

GATEWARE-EM

2. Setting

Menu

–

Selecting item

3. Serial Pot

tti

t

Doalltech

E

n

v

i

1. Setting view

2. Default setting
se

ng

4. Relay setting

5. Special setting

6. LAN setting

②

① This is product setting Menu page

ENTER next page

7. WLAN setting

8. USB use

9. Time setting

0. password setting

ENTER next page

Menu2

④

r
o
n

.
S
e

t

i

n
g

English

② If you push the ENTER button, you can move to next

page

Menu2

③ This is low Menu of the Product setting

④ If you push the ENTER button, you can move to

next page

⑤ Select the Menu by key pad to move

This image is just for reference. So it’ can be different from real situation

Reference

Screen & Menu function can be changed for high quality improvement

ENT

ENT

16

Doalltech

n

3. Menu setting

–

Status check

n

Camera

use

1 Channel

Default Gateway 192.168.1.1

Relay3

Not Use

②

If u push the ESC button

E

v

i

Device Status info, network status info.

r

o

.
S
e

t
t

i

n

Project codeIBDD2008 IP use status DHCP
Attendance IN/OUT IP Address 192.168.1.100

Pot1 13.56Mhz Subnet Mask 255.255.255.0
Pot2 Not Use DNS 1 168.126.63.1
Pot3 Not Use DNS 2 168.126.63.2
Pot4 Not Use
Relay1 Not Use
Relay2 Not Use

Relay4 Not Use
Flash start 16
Flash end 09

GATEWARE-EM

g

English

① Current system status is displayed

ESC

,

u can return to Menu selection screen

17

Reference

This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement

GATEWARE-EM

4. Menu setting

-

Default

setting

Project

IBDD2008

t

Save

⑤

g

⑤

g

Doalltech

E

n

v

Device Default setting

code

Input data in English

Device number 1

Attendance IN/OUT

Camera use 1 Channel

① Default setting Screen of the Product

i

r
o
n

.
S
e

t

i

n
g

English

②Enter the project code

– When inputting English in project code,

Move to the project code by using SHIFT button.

ENTER in inputting English.
This button is used after changing 4, 6 key of

alphabet A indication to English figure.
③Enter the device number
④ Set the IN/OUT setting

Set the Camera settin
⑥ Push the Save to save setting code
⑦ If u push the ESC button, you can return to Menu

selection Screen

• Project code English input by enter key / setting number by Keypad number

Reference

• In case Device number site, If device are 2ea ,please input each 1,2 number

ENT

SHIFT

18

Doalltech

5. Menu setting

–

Serial

Pot

setting

t

Save

E
n
v

GATEWARE-EM

i

r
o
n

S
e

t

i
n
g

Serial Pot setting

Pot1 13.56 MHz

Pot2 125 kHz & 13.56 MHz

.

Pot3 125 kHz & 13.56 MHz
Pot4 Not Use

English

19

① This is setting Screen of the RFID Serial Pot

②Set the RFID SerialPot

③ Pot1 is Internal Pot, Pot2,3,4 are External Pot.

④ Set the Additional RFID TYPE.

⑤ Save the setting

⑥ If u push the ESC you can return to setting Menu

Reference

ESC

This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement

GATEWARE-EM

6. Menu setting

–

Relay

setting

Relay1

All

1

t

Save

⑤

If you push the ESC

button, you can return to setting

Doalltech

E

n

v

Relay setting

ow Port
Relay2 Deny Port 1,2
Relay3 Not Use
Relay4 Not Use

① Relay setting Screen

i

r
o
n

.
S
e

t

i

n
g

English

② After selecting the Allow(registration), Set the Pot

③ After selecting Deny(rejection), Not applied even though set

the Pot

④ Push the save button for saving setting

Menu

• Allow ,Enrolling card Data input, Relay works in Serial Pot

Reference

• Deny  Unenrolled card Data input, Relay works in Serial Pot,

ESC

20

Doalltech

7. Menu setting

–

Special setting

Flash

Start

Time17

t

Save

–

If it s possible to enter citizen number without card

E
n
v

GATEWARE-EM

i

r
o
n

S
e

t

i
n
g

Device special setting

Flash End Time 09

.

Local Server

Keypad input Use

short period key input Use

① Flash start Time& End Time setting

English

21

② Enter the IP of Local Server

③ The setting of Keypad input use or not

④ Short period card setting

⑤ Push the Save to save edit code

⑥ If u push the ESC button u can move to next

Reference

’

– After card check, citizen number is entered from Short

period worker

ESC

page

• Inputting 24Time way in Flash start Time

• Example) Start Time PM = 17 , End Time AM 9 = 09

GATEWARE-EM

8. Menu setting

–

LAN setting

DHCP/STATIC

t

g

g

Doalltech

E

n

v

LAN setting change

IP ADDRESS

SUBNET MASK

DEFAULT GATEWAY

DNS 1
DNS 2

① Select the DHCP/STATIC use or not

Save

i

r
o
n

.
S
e

t

i

n
g

English

② STATIC Application situation, set the IP ADDRESS

③ Set the SUBNET MASK

④ Set the DEFAULT GATEWAY

⑤ Set the DNS 1 setting

⑥ Set the DNS 2 setting

⑦ Push Save button to save settin

⑧ If you push the ESC button, you can return to setting Menu.

Reference

Code

ESC

* DHCP– Internet connection setting method by IP ADDRESS router (Automatically IP allocation)
* STATIC – Internet connection setting method by Direct input of IP ADDRESS

22

Doalltech

9. Menu setting

–

by using

USB

t

⑤

If you push the ESC

button, you can return to setting

ESC

E
n
v

GATEWARE-EM

i

r
o
n

S
e

t

i
n
g

USB Data in&output

.

Save worker Data

copy to attendance Data USB

English

23

① USB application setting Screen

② Connect the USB memory to product

③ Save the worker data by pushing the Worker data save button

④ Select the save button to copy worker attendance data to

Reference

Attendance Data USB by memory stick

Menu

C/S Version is only available
Input output from Gateware folder Data of USB memory

GATEWARE-EM

n

10. Menu setting

–

Time setting

n

2009

th

14 day

⑤

If you push the ESC

button, you can return to

Doalltech

E

v

i

Current Time & Time zone setting

year5 mon

12 hour 15 min 30 sec

(GMT+09:00)Seoul

Korea Standard Time

Save

① Enter the current year, month, day

r

o

.
S
e

t
t

i

n
g

English

② Enter the current hour, min, second

③ Select the Standard Time zone

④ Push the Save button for save setting

setting Menu

This image is just for reference. So it’ can be different from real situation

Reference

Screen & Menu function can be changed for high quality improvement

ESC

24

GATEWARE-EM

11. Menu setting

–

Password

t

Doalltech

E

n

v

i

r
o
n

.

Password change

Save

① Product password setting

② Pushing the Save button to save the password

③ If you push the ESC button, you can return to

ESC

S
e

t

i
n
g

English

setting Menu

.

This image is just for reference. So it’ can be different from real situation

Reference

Screen & Menu function can be changed for high quality improvement
Default setting password is 0000.

25

GATEWARE-EM

1. External

Interlocking device

Turn

Gate

125Khz

Doalltech

R

e

f

e

r

e

n

c
e

Turnstile Gate SystemTurnstile Gate System

CCTV for Safety
management

READER

-

13.56Mhz
READER

-

English

26

Photo 1 Turnstile Gate System

Photo 1.

①Using Various RFID TYPE(125KHz,13.56MHz) at the

same time is available

②When worker check the scan card, device takes a picture by

Safety CCTV automatically

This is a use example. This can be composed differently in case of actual application.

Reference

GATEWARE-EM

2. External

Interlocking device

–

Composition item

C

3

External
Monitor

Doalltech

External Interlocking productExternal Interlocking product

Magnetic

sensor

External
Speaker

Photo

sensor

R

e

f

e

r
e
n

Camera1

Camera2

RFID

13.56Mhz
RFID

125Khz

Detector

for car

Crossing

barrier for car

Flashlight

c

e

English

amera

Reference

Can interlock with another various devices

Turnstile Gate

System

27

GATEWARE-EM

1. Additional function

b

R

Doalltech

e

f

e

r

e

n

c
e

Photo sensorPhoto sensor

• Announcement

Here is oo Const. xx Site

Please make sure to

wear safety gear

everyday

• In case of entering hazardous area, alarming messa

y Attendant motion sensor

English

28

ge is indicated by blinker light and speaker.

This is tunnel gate.

Please enter the gate

after wearing safety gear

This is a use example. This can be composed differently in case of actual application.

Reference

GATEWARE-EM

1. Additional function

Doalltech

R

• Transmission of field pictures through network aft

er image capturing of 1/4 channel camera.

• Transmission of Temperature, humanity, vibration,

e

f

e

r
e
n

c

e

English

Reference

wind direction, wind speed with connection of
sensor, Screen displayed & sending network.

This is a use example. This can be composed differently in case of actual application.

29

GATEWARE-EM

2. F A Q

Camera

is not displayed

RFID

iti

R

Case 1

e

Doalltech

f

e

r

e

n

c
e

System is not working

→ Please check the Power supply connection
→ Please check the Battery charge status

Case 2

Data down and upload don't work.

→ Please check the internet connection
→ Please check the Modem & Network status

Case 3

→ Please check the Camera connection
→ Please check the Menu setting

English

30

Case 4

card recogn

→ Please check the RFID Reader connection
→ Please check the Menu setting

Case 5

There is no system response. (EX : Time sign stops)

→ Please push the RESET button and restart

Please check FAQ before A/S Request

Reference

on doesn't work.

GATEWARE-EM

2. F A Q

There is error message window On the

Screen

Case 6

Doalltech

R

e

LCD Screen is monotonous in the state of ash or black color.

→ push the RESET or power switch to restart
→ When being occurred same symptom after re-start, please contact to Doall
tech and then confirm it

Case 7

There is no sound during working

→ Please check the volume button by key pad
→ When being occurred same symptom after re-start, please contact to Doall
tech and then confirm it.

Case 8

The battery does not be charged.

→ Please check the Power supply cable, Adapter, internal battery terminal
connection
→ Change the old battery to new battery

Case 9

f
e

r
e
n

c

e

English

→ Please press the ENT button of keypad.

(When the program is abnormal, it will be worked again after closing).
→ In case the keypad does not be inputted, please start again by using
RESET button or power switch.

→ When being occurred same symptom after re-start, please contact to Doal

ltech and then confirm it.

Please check FAQ before A/S Request

Reference

* Battery is consumption goods & 6months A/S warranty available

31

GATEWARE-EM

3. Before A/S Request

Pl

Please

c

heck

Error

message from

Monitor

itself

Please

check the

Menu

setting

R

Doalltech

e

f

e

r

e

n

c
e

English

Error type Cause and Solution

In case of Power

supply failure

In case system is not

Working

In case of

Monitor Screen

Shutting down by

ease check the Power supplycable.

Please check the 220 volt as right voltage

Please check the electronic status of receptacle

Please check the System Power supply Cable

Please check loss of Internal supply item

Please check Monitor Power supply cable

Please check the Monitor Cable connection

In case of Camera

screen failure

32

Please Check the system Power supply

Please check the Camera cable connection

GATEWARE-EM

g

3. Before A/S Request

g

g

Please

check the

router

motion

lamp

g

g

gyg

Serial

Pot

Menu

Doalltech

R

Error type Cause and Solution

In case internet is

not working

In case Router is not

working

Please network setting in LAN settin
Menu

Please check LAN cable connection

Please contact with internet company

Power supply cable & Adapter

Please check LAN cable connection

Please check Router menu setting

Please check Power supply cable

e

f

e

r
e
n

,

c

e

English

In case External

Relay is not working

(Turn gate,Flash light)

In case of not

recognizing the RFID

tag

Please check the Relay Data cable
connection

Please settin
Menu

Please check the RFID Reader cable
connection

Please check the RFID Reader setting from

code from Relaysettin

33

GATEWARE-EM

3. Before A/S Request

Pl

of RFID recognition

i

operations are not

R

Doalltech

e

f

e

r

e

n

c
e

Error type Cause and Solution

ease check Key pad cable connection

Key pad doesn’t

work

If flash lamp is not

turned on

Please make sure to push key pad

Please confirm whether input at current
Menu is possible. (There are keys that do
not be operated at partial menu)

Please check the Flash cable connection

Please confirm the setting figure of
related flash in the setting Menu

Please check Flash lamp status

English

34

In case power supply

and status indication

lamp do not turned

on

In case other

correct

Please check the Lamp connection cable

Please confirm whether RFID recognition

s correct

Please confirm whether the system is
turned on.

Please after shutting down, restart

Please after checking error type, contact
with doalltech

GATEWARE-EM

4. Product Size

-

Hardware

CPU

Processor Marvell PXA320

-

P

EPLD

Latti

MACH LC4128V

LAN

10/100 M

Eth

(91C111)

Audio

AC97 (WM9712)

Internal x 2, External x 1

Doalltech

R

Hardware

Memory

Touch Screen Touch Screen Controller

(ARM11 Core 806Mhz)

RAM 133Mhz DDR SDRAM 512MByte

Nand

NAND Flash 128MByte

Flash

ce isp

Display 800 X 480 (7” Wide TFT Color LCD)

SD / MMC SD / MMC 1 Slot

ernet

Wi-Fi Wireless LAN

(Max 56Mbps, IEEE 802.11 b/g)

e

f
e

r
e
n

c

e

English

Camera CCD Camera

Video Controller Video IN x 3, Video OUT x 1

KEY PAD 4x4 Push Button

Reference

Product specification can be changed for high quality improvement

UART Max3232 (Debugger x1, Serial x3)

(Techwell TW2835)

35

GATEWARE-EM

4. Product Size

-

Software

RelaySi

l

Out Rel

4

H

idi

Und

95%

R

e

f

RFID

Doalltech

ATMEGA 13.56Mhz Reader

e

r

e

n

c
e

English

USB

Software

Host USB 1.1 Host

Client USB 2.0 Client

CPU-JTAG JTAG Emulator – 20pin

E-JTAG JTAG Emulator – 8pin

gna

Sensor

Battery

LED

Flash

O/S Windows CE 5.0 Core

Signal Input Sensor x 8

Li-ion 14V, 8800 mAh

Color LED x 3

Light Flash x 2

ay x

Application Doalltech GatewareEM / GatewareCS

Operating Temperature Humidity

Temperature -20 ℃ ~ +55 ℃

36

Reference

Product specification can be changed for high quality improvement

um

ty

er

GATEWARE-EM

4. CE INTERFERENCE STATEMENT

Doalltech

R

e

• CE Warning!

• Changes or modifications not expressly approved by

the party responsible for compliance could void the
user’s authority to operate the equipment.

• EN Test Regulation Version.

1. SAFETY
EN 60950-1 (EN 60950-1:2001+ALL:2004)

2. EMC
EN 301 489-1 (V1.8.1:2008.04)
EN 301 489-3 (V1.4.1:2002.08)
EN 301 489-17 (V2.1.1:2009.05)

3. RADIO
EN 300 328 (V1.7.1:2006.10)

f

e

r
e
n

c

e

English

EN 300 330-1(V1.5.1:2006.04)
EN 300 330-2(V1.3.1:2006.04)

CE MARK

Product specification can be changed for high quality improvement

Reference

37

GATEWARE-EM

5. FCC INTERFERENCE STATEMENT

This equipment generates, uses and can radiate radio frequency energy and, if

which the receiver is connected.

FCC RF INTERFERENCE STATEMENT

Doalltech

R

e

NOTE :

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.

not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

f
e

r
e
n

c

e

English

- Consult the dealer or an experienced radio, TV technical for help.

- Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not expressly
approved by the grantee or manufacturer could void the users authority to
Operate such equipment

Reference

Product specification can be changed for high quality improvement

38

GATEWARE-EM

Additional charge item

B

WLAN Wireless

R

e

f

e

r

e

n

c

attery

Doalltech

module

e

English

AV LCD MONITOR Wireless transponder system

Internet homepage

www.doalltech.com

Contact

0707-018-5900

02) 555-9779

Ubiquitous team

Picture size of each item can be different from real product size,, Some part items can

39

Reference

be changed depending on the situation