DNS 24998 User Manual

USB port
Power Switch
PORTABLE POWER BANK
User Manual
8000m Ah
SILVER BLACK
For more info: www.mworksproducts.com
or support@mworksproducts.com
LED Light
Descripon
(1) Power Switch Buon
(2) USB1 Output port (3) USB2 Output port (5) LED light
(4) Micro USB Input port
(6) LED light (7) USB Cable
charge posionWireless
LED Light
Micro
Product Name: Wireless charge power bank
Product Model: 24998
Baery Type:
Li-Polymer Baery
Capacity:8000mAH Input: DC 5V/2A Max
USB Output: USB1 5V/1A, USB2 5V/2A,
USB Total Output 5V/2A, Wireless
output: DC 5V/1A, 5W
Size: 162.0 * 73.8* 13.8mm
iPad,Mobile Phones,iPone,iPod,and other
digital devices requiring charging through
a DC 5.0V 1A orDC 5.0V 2A USB port.
DC 5.0V/1A through Wireless charging.
Note:
(1). The USB ports is support standard USB specificaon.
(2). Support more than 85%of
“USB
Micro USB cable”to charge you device when your original cable
not support this power bank. Hense the USB ports support all iPod, iPhone,iPad and other devices but do not support charging of Blackberry 9700,Nokia N900 or other use the USB dumb-charger.
Tablets;Pleaseuse included
Samsung
Using your power bank
1.You can use the included Micro USB charge the power
power source. Note: While the power bank is being charged, the Blue LEDs will flash
all LEDs will light up and the power bank will stop charging. You should be able to charge your mobile devices once the power bank completes its charging or disconnected from its power source.
2.Short press the on/off Power Switch Buon on the power bank, the LEDs will be illuminated for 10 seconds and the power bank
will start charging your devices, simply disconnect them from the power bank.The power bank output will remain for 10 seconds
and stop automacally if the power bank does not start charging any device again within this period.
Recharging your devices
1.there is an on/off power switch on the power bank, upon pressing the switch buon the led power indicator will inlluminate for 2 to 3 seconds, aer that , the power bank will start charging your devices.
2.You can wireless charge your devices with it. You can charge your devices with a protecve case on it. (Works with most cases up to 4mm thick)
3. If your protecve cases has metallic studs,magnec clasps,or a
plate,you should remove the case before placing your phone
magnec
on the mount.
4.
For opmum charging, place your devices in the center of the power
bank.
bank from a
and light up one aer another. Once the power bank is fully charged,
Baery Capacity Indicator & LED Light Switch Buon The LED power indicators provide informaon about baery charging
status and baery power level: Press the Power Switch Buon to check power level, the LED will be illuminated for 10
seconds.
LED’s indicate from the right to le:
·1 LED Flashes:<10% Power
·1 LED on:<25% Power
·2 LEDs on:25%-50% Power
·3 LEDs on:50%-75% Power
·4 LEDs on:75%-100% Power
It takes around 3 hours to fully charge this power bank via a 5V 2A USB power source.
Maintenance
In order to maximize the baery life, please maintain your Wireless
charge power bank as recommended below:
1. Re-charge your Wireless charge power bank dry once every three
months if it has not been in use.
2. Keep your Wireless charge power bank dry and away from moist or
corrosive materials.
3. Do not wash your Wireless charge power bank with harsh chemicals, soaps or detergents.
Package Contents
-1X Wireless charge power bank.
-1X USB Cable
-1X User Manual
Warning Read all instrucons and warnings prior to using this product for the first me.Failure to read and follow these safety and usage instrucons could result in fire,explosion,electric shock or other hazard
that could potenally cause
1. Do not modify,disassemble,open,drop,crush,puncture or shared the
product
2.
Do not expose the product to water or excessive moisture
3.
Keep away from heat sources and direct sunlight to prevent heat
build-up
4.
Keep away from high voltage devices
5.
This product is not a toy,keep away from children and ensure that
all persons who use the product read and follow these instrucons
and warnings
6.
Please do not try to charge your device when you are charging the
power bank.
property damage or even fatal injure.
Warning: Changes or modificaons to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.Increase the separaon between the equipment and receiver.Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.
Shielded cables must be used with this unit to ensure compliance
with the Class B FCC limits.
This device complies with Part 18 of the FCC Rules. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separaon between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.”
The device complies with part 18 of FCC rules.
Importer:MOBILEISTIC, LLC Add:2951 N Great Southwest Pkwy. Grand Prairie, TX 75050,USA TEL:(631) 531 9500
Loading...