DNS 16WMS129 User Manual

150x210mm

User Manual

Waterproof Bluetooth Speaker

1: Power
2: Pause/Play
3: Vol-/ Previous Track
4: Vol+/Next Track
5: Charging Indicator

6: USB Charging Port
7: Aux in Port

Package Components
1pc Speaker
1pc User Manual

How to power on or off the device:

Press and hold the power button to turn the speaker on or off. The
white indicator will flash quickly with a voice “Powering on” indicating
the device is powered on. The speaker will automatically go into
Bluetooth mode upon powering on.

How to pair device using Bluetooth:

1. Power on speaker and ensure that the white indicator light
flashes quickly (this means that the device is in Bluetooth pairing
mode).

2. Turn on the Bluetooth function of the device (smartphone, tablet,
computer, etc.) which you would like to pair with the speaker. Ensure
that the device is in pair mode.

3. Select “16WMS129” on your selected device to pair with
speaker until it says “Paired” indicates that a successful paring has
occurred.

4. You should now be successfully paired to the speaker

Using the 3.5mm audio jack(Aux-in):

Plug in a 3.5mm audio jack into the Aux in port. Once a 3.5mm audio
jack is inserted into the Aux in port, the device will automatically be
switched to Aux-in function. Plug the other end of the 3.5mm audio
jack into the compatible device you are wishing to play music from.

Functions:

Accepting a call - Press the “pause/play” button
Rejecting a call - Press and hold the “pause/play” button
Ending a call - Press the “pause/play” button
Changing Volume – Press the “+ or -” button
Changing the track – Press and hold “+ or -”button

speaker, try below steps:

Click16WMS129

Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)

This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment.

2019 VERSION 1