DNF Controls ST300-SRP, ST300-SRP-T User Manual
12843 Foothill Blvd. Suite C
Sylmar, California 91342
V: 818.898.3380
F: 818.898.3360
sales@dnfcontrols.com
Model No. ST300-SRP
and ST300-SRP-T
for
DDRs With Simultaneous
Record/Playback Capability
SLOW MOTION CONTROLLER
USER MANUAL
V 1.41
Table of Contents
1. REVISION HISTORY 3
GETTING STARTED . . . 4
2. SYSTEM DESCRIPTION 4
DEFINITIONS 4
3. INSTALLATION 5
a. SIMULTANEOUS RECORD/PLAYBACK MODE OFF 5
b. SIMULTANEOUS RECORD/PLAYBACK MODE ON 5
4. OPERATION 7
a. LCD DISPLAY 7
b. TRANSPORT CONTROL 7
c. CUE POINTS 8
d. GOTO/PREROLL TO A MANUALLY ENTERED TIME 9
e. RECORD MODE SELECTION 9
5. SIMULTANEOUS RECORD/PLAYBACK FUNCTIONS 10
a. SELECT SIMULTANEOUS RECORD/PLAYBACK MODE 10
b. CREATE NEW CLIP 10
b. STOP RECORD 11
c. GO TO EE 11
d. GOTO LIVE 11
ADVANCED FEATURES . . . 12
6. TRANSFER CUELIST 12
a. TRANSMIT CUE LIST FUNCTION 12
b. RECEIVE CUE LIST FUNCTION 13
REFERENCE . . . 14
7. SETUP MENU 14
8. FUNCTION TABLE 17
9. SPECIFICATIONS 20
RS422 SERIAL CONNECTOR 20
POWER CONNECTOR 20
AUX PORT RS422 SERIAL CONNECTOR 21
GPI IN/OUT CONNECTOR 21
10. KEY LAYOUT 22
11. DNF CONTROLS LIMITED WARRANTY 23
Manual Version:.......……….....................................1.41 091906
Document ID:....….….…….........ST300-SRP_User_Manual.doc
ST300-SRP & ST300-SRP-T, Slow Motion Controller Page
22 ooff 223
3
1. REVISION HISTORY
051603 1.0 Original document
123003 Rev. 1.1 Company header information revised.
Updated Transmit Cue List Function and Receive Cue List Function
Descriptions.
Added DNF Controls Limited Warranty.
060204 Rev. 1.2 Updated Connection Diagram.
Corrected T-bar size, SPECIFICATION.
111804 Rev. 1.3 Added GOTO LIVE Section.
Added Video Standard Selection and
INPUT Video Delay Entry to SETUP MENU.
102605 Rev. 1.4 Update to current manual convention
091906 Rev. 1.4 1 Update to include Create New Clip function.
ST300-SRP & ST300-SRP-T, Slow Motion Controller Page
33 ooff 223
3
Getting Started . . .
2. SYSTEM DESCRIPTION
The ST300-SRP Slow Motion Controller combines the power of the ST300 Slow Motion
Controller with the power of DDRs that have simultaneous record/playback capability.
In the ST300 Setup Menu, disable S-RP Mode to access standard ST300 Slow Motion functions.
Enable SRP Mode to access the following functions:
Simultaneous Record and Playback.
Press [EE] to go to live video.
DEFINITIONS
Throughout this document VTR, DDR, VDR & Video Server will be referred to collectively
as “VTR.”
The ST300-SRP will be referred to as “ST300.”
Words surrounded by brackets, for example, [ENTER], are keys on the ST300.
Words surrounded by curly brackets, for example, {DEFAULTS}, are soft keys under the
display.
[XXX] + [XXX] means hold the two keys down simultaneously.
ST300-SRP & ST300-SRP-T, Slow Motion Controller Page
44 ooff 223
3
3. INSTALLATION
Select a. OR b. below.
a. SIMULTANEOUS RECORD/PLAYBACK MODE OFF
1) Plug one end of a 9-conductor, RS422 serial cable into the VTR1, VTR2, VTR3,
OR VTR4 connector on the rear of the SLOW MOTION CONTROLLER. Plug
the other end of the cable into the 9-pin REMOTE connector on the VTR.
2) Connect the supplied POWER SUPPLY, APX#4108, into the POWER
connector on the rear of the ST300. Plug the Power Supply into an outlet, 90
VAC – 240 VAC.
3) Select REMOTE mode on the VTR's front panel.
4) Check the SETUP MENU prior to using the Slow Motion Controller to confirm
proper Record mode, SLO-MO speed range, and other User settable modes.
OR
b. SIMULTANEOUS RECORD/PLAYBACK MODE ON
1) Connect VTR1 connector on the back of the ST300 to the REMOTE connector
of playback channel on DDR 1.
2) Connect VTR3 connector on the back of the ST300 to the REMOTE connector
of record channel on DDR 1.
3) Connect VTR2 connector on the back of the ST300 to the REMOTE connector
of playback channel on DDR 2.
4) Connect VTR4 connector on the back of the ST300 to the REMOTE connector
of record channel on DDR 2.
5) Connect the supplied POWER SUPPLY, APX#4108 in to the POWER connector
on the rear of the ST300. Plug the Power Supply into an outlet, 90 VAC – 240
VAC.
6) Select REMOTE mode on the DDR’s front panel.
7) Check the SETUP MENU prior to using the Slow Motion Controller to confirm
proper Record mode, SLO-MO speed range, and other User settable modes.
ST300-SRP & ST300-SRP-T, Slow Motion Controller Page
55 ooff 223
3
ST300-SRP & ST300-SRP-T, Slow Motion Controller Page
66 ooff 223
3
4. OPERATION
a. LCD DISPLAY
During normal operation, the top row of the display shows the selected time mode
and current time location of the selected VTR.
For example: TM 01:12:09:23
Time Modes - TM= Tape Timer TC= LTC VT= VITC
The currently selected SLO-MO speed is displayed on the far right side of the
top row.
The bottom row of the display shows the current Cue Point number
and its contents.
b. TRANSPORT CONTROL
Select the desired transport function by pressing the appropriate switch on the SLOW
MOTION CONTROLLER.
The Real-Time Status Indicators will light to indicate the VTR's current
mode.
For example: Pressing [PLAY] will put the VTR into the PLAY mode.
The PLAY Status Indicator will turn on when the VTR is in PLAY
mode.
Press [RECORD].
OR
[RECORD] + [PLAY] to put the VTR into Record mode (see SETUP
MENU).
NOTE: The VTR will not go into Record mode if “Record Inhibit” is enabled
on the VTR or tape cassette.
Check SETUP MENU prior to using the SLOW MOTION
CONTROLLER to confirm proper Record mode and other User
settable modes.
tape transport
ST300-SRP & ST300-SRP-T, Slow Motion Controller Page
77 ooff 223
3
Loading...