DNF Controls ST300-CP User Manual

12843 Foothill Blvd. Suite C Sylmar, California 91342 V: 818.898.3380 F: 818.898.3360 sales@dnfcontrols.com
Protocol Implementation
USER MANUAL

Table of Contents

1. REVISION HISTORY 2
GETTING STARTED . . . 3
2. OVERVIEW 3
a. KEY PRESS DECODING 3 b. WHEEL MODE 3 c. T-BAR POSITION 3 d. KEY LEDs 3 e. LCD DISPLAY 4
REFERENCE . . . 5
3. FUNCTION CHART 5
4. SPECIFICATIONS 6
COMMUNICATIONS FORMAT 6 PROTOCOL FORMAT 6 ST300 KEY SCAN AND LED CODES 8 VTR#1 CONNECTOR 8 VTR#1 CONNECTOR 9 VTR#2 CONNECTOR 9 POWER CONNECTOR 9 GPI IN/OUT CONNECTOR 9
5. KEY LAYOUT 10
6. DNF CONTROLS LIMITED WARRANTY 11
Manual Version ……….…………………… 2.21 082106
Document No. ………….ST300-CP_User_Manual.doc
SSTT330000 CCPP 11

1. REVISION HISTORY

123003 Rev. 2.0 Company header information revised. Added DNF Controls Limited Warranty.
060704 Rev. 2.1 Added Key Layout.
061404 Rev. 2.2 Changed Byte count for “M” command.
082106 Rev. 2.2 1 Changed Key Code of number “5” key and added LED C odes.
22 SSTT330000 CCPP

Getting Started . . .

2. OVERVIEW

The ST300 will operate as an event driven device, transmittin g information to the external device when a change is detected.
In addition, the external device may poll the ST300-CP for status.

a. KEY PRESS DECODING

The ST300 will detect and decode changes in the Keyboard state. The ST300 will return a 16-bit Scan Code that describes a key press or a key release. The Scan Code allows 2 key combinations to be detected and decoded.

b. WHEEL MODE

The External Device selects the current wheel mode: 0= Off 1= Jog 2= Shuttle (with mechanical detents)
When OFF mode is selected, the wheel will not return position information and the mechanical detents will be de-energized.
When JOG mode is selected, the mechanical detent will be de-energized. The WHEEL POSITION will return a one-byte, signed value that represents pulses per time period. Zero pulses in a time period represents that the wheel had no movement (stopped).
Positive value represents Clockwise movement. Negative value represents Counter­clockwise movement.
When SHUTTLE mode is selected, the current wheel position will become the STILL position of the wheel. The WHEEL POSITION will return a one-byte, signed value that represents pulses (rotation) from STILL position. A positive value represents Clockwise movement from STILL. A negative value represents Counter-clockwise movement from STILL.

c. T-BAR POSITION

The T-BAR POSITION returns a one-byte value, that indicates the relative position of the T-BAR from its STILL position.
The T-BAR assembly uses an incremental, not absolute encoder. At power up, the ST300 prompts the user to move the T-BAR to its STILL position. Any time the T-BAR is moved to its STILL position, the position value is zeroed, forcing a re-calibration.

d. KEY LEDs

The Key LEDs are controlled by the External Device. A three-byte (3) value sent to the ST300 by the External Device determines the state of each LED, one bit per LED. When bit = 1, the LED is on. When bit = 0, the LED is off.
SSTT330000 CCPP 33

e. LCD DISPLAY

The messages on the LCD Display are controlled by the External Device. The External Device controls the message content, message formatting, and display row selection.
44 SSTT330000 CCPP

Reference . . .

3. FUNCTION CHART

Control Panel
Functional Area
Key Press Decoding
Wheel Mode
Wheel Position ST300
T-Bar Position ST300
Key LEDs External
LCD Display External
Controlled
By
ST300
External
SSTT330000 CCPP 55

4. SPECIFICATIONS

Power 90 VAC to 265 VAC adapter supplied with IEC connector
Size [L x W x H] 12” x 6” x 1.5” (front) 3.0” (rear) [T-Bar unit is 12.6” wide]
Weight 4 lbs.
Real Panel Connectors VTR1, VTR2, VTR3, VTR4 (All DB9F) GPI (DBF15F) Power (DB9M) Aux (DB9F)
Display Easy to read 2-line, back-lit LCD display
(User adjustable contrast)
Jog/Shuttle Wheel With mechanical detents.
Optional “T”-bar Slo-mo 0-200% of Play Speed

COMMUNICATIONS FORMAT

Baud 38.4K Parity ODD Data Bits 8 Stop Bits 1

PROTOCOL FORMAT

STX + BC + CMD + DATA + ETX
STX= 02H ETX= 03H BC= Byte Count CMD= 1 byte DATA= number of bytes dependent upo n CM D ACK= 04H NAK= 05H
66 SSTT330000 CCPP
Key Press: STX+ 03 + ’K’+ Scan Code H + Scan Code L + ETX ÎÎÎ
Wheel Mode: ÍÍÍSTX + 03 + ‘M’+ Wheel Divide Byte + Mode byte + ETX Mode byte: 0= Off 1= Jog 2= Shuttle
STX + 01 + ACK + ETX ОООООООООООООО
Wheel Position: STX + 02 + ‘W’ + Signed byte ОООООО Signed byte = -64 Æ +64
ST300 External Device
NOTE: Wheel divide byte sets the resolution of the wheel: use a number from 1 to 96. One (1) is the highest resolution.
ST300 External Device
T-BAR Position: STX + 02 + ‘T’ + Signed byte ООООО Signed byte = 0 Î +64
LED Status: ННННННSTX + 04 + ‘L’ + Byte1 + Byte2 + Byte3 + ETX Byte1= LED1 (Lsb) to LED8 (Msb) Byte2= LED9 (Lsb) to LED16 (Msb) Byte3= LED17 (Lsb) to LED24 (Msb)
STX + 01 + ACK + ETXОООООООО
Display: ÍTX + BC + ‘D’ + Row byte + Message bytes (null terminated) + ETX Row Byte: 0= Top Row (Row 0) 1= Row 1 2= Row 2 3= Bottom Row (Row 3)
Message Byte: Max 20 Characters, Null
Terminated
STX + 01 + ACK + ETXООООООООООО
SSTT330000 CCPP 77

ST300 KEY SCAN AND LED CODES

KEY
DESCRIPTION H L 1 2 3 11 4008h 22 1010h 33 2010h 44 2008h 55 0210h 66 0810h 77 1008h 88 0110h 99 0410h
10 0 4010h 11 ENTER 8008h 12 DEL 8010h 13 RWD 0102h 010000h 14 FFWD 0202h 020000h 15 STOP 0402h 040000h 16 PLAY 0802h 080000h 17 SLOMO 8001h 100000h 18 RECORD 0204h 200000h 19 10 04 h 20 REV 2002h 800000h 21 FREEZE 4002h 000100h 22 BLANK KEY 10 02 h 23 SHIFT/ESC 40 01 h 00 00 20 h 24 ENTER TIME 0104h 000400h 25 LAS T CUE 04 04 h 00 08 00 h 26 NE XT CUE 20 04 h 00 10 00 h 27 EE 4004h 002000h 28 TIME MODE 0804h 004000h 29 MENU 1001h 008000h 30 JOG 2001h 000001h 31 SHUTTLE 0801h 000002h 32 GO TO 0101h 000004h 33 PREROLL 02 01 h 00 00 08 h 34 MARK 0401h 000010h 35 VTR1 0108h 400000h 36 VTR2 0208h 000200h 37 VTR3 0408h 000040h 38 VTR4 0808h 000080h
KEY
VALUE
LED
VALUE
88 SSTT330000 CCPP
VTR#1 CONNECTOR RS422 SERIAL CONNECTOR
9-Pin D-Type, Female
Pin # 1 Frame Ground
2 Receive A Í 3 Transmit B Î 4 Transmit Common 5 Spare 6 Receive Common 7 Receive B Í 8 Transmit A Î 9 Frame Ground
VTR#2 CONNECTOR RS232 SERIAL CONNECTOR
9-Pin D-Type, Female
Pin # 1 Not Used 6 Not Used
2 Rx Data 7 Not Used 3 Tx Data 8 Not Used
4 Not Used 9 Not Used
5 Ground

POWER CONNECTOR

9-Pin D-Type, Male (DB9M)
Pin # 1 +5v DC 6 +5 VDC 2 +5v DC 7 Ground 3 Ground 8 Ground 4 +12 VDC 9 Ground
5 –12 VDC

GPI IN/OUT CONNECTOR

15-Pin D-Type, Female (DB15F)
Pin # 1 GPI 1 Out 9 GPI 1 In 2 GPI 2 Out 10 GPI 2 In 3 GPI 3 Out 11 GPI 3 In
4 GPI 4 Out 12 GPI 4 In 5 GPI 5 Out 13 GPI 5 In 6 GPI 6 Out 14 GPI 6 In 7 GPI 7 Out 15 GPI 7 In
8 Ground
SSTT330000 CCPP 99

5. KEY LAYOUT

1100 SSTT330000 CCPP

6. DNF CONTROLS LIMITED WARRANTY

DNF Controls warrants its product to be free from defects in material and workmanship for a period of one (1) year from the date of sale to the original purchaser from DNF Controls.
In order to enforce the rights under this warranty, the customer must first contact DNF’s Customer Support Department to afford the opportunity of identifying and fixing the prob lem without sending the unit in for repair. If DNF’s Customer Support Department cannot fix the problem, the customer will be issued a Returned Merchandise Authorization number (RMA). The customer will then ship the defective product prepaid to DNF Controls with the RMA number clearly indicated on the customer’s shipping document. The merchandise is to be shipped to:
DNF Controls 12843 Foothill Blvd., Suite C Sylmar, CA 91342 USA
Failure to obtain a proper RMA number prior to returning the product may result in t he return not being accepted, or in a charge for the required repair.
DNF Controls, at its option, will repair or replace the defective unit. DNF Controls will return the unit prepaid to the customer. The method of shipment is at the discretion of DNF Controls, principally UPS Ground for shipments within the United States of America. Shipments to international customers will be sent via air. Should a customer require the product to be returned in a more expeditious manner, the return shipment will be billed to their freight account.
This warranty will be considered null and void if accident, misuse, abuse, improper line voltage, fire, water, lightning or other acts of God damaged the product. All repair parts are to be supplied by DNF Controls, either directly or through its authorized dealer network. Similarly, any repair work not performed by either DNF Controls or its authorized dealer may void the warranty.
After the warranty period has expired, DNF Controls offers repair services at prices listed in the DNF Controls Price List. DNF Controls reserves the right to refuse repair of any unit outside the warranty period that is deemed non-repairable.
DNF Controls shall not be liable for direct, indirect, incidental, consequential or other types of damage resulting from the use of the product.
# # #
SSTT330000 CCPP 1111
Loading...