XV. SETUP MENU..................................................................................................................... 18
XVI. SPECIFICATIONS............................................................................................................ 20
XVII. KEY LAYOUT...................................................................................................................... 22
XVIII. DNF CONTROLS LIMITED WARRANTY ............................................................... 23
DMAT-O-42 Sports Controller, Odetics Protocol Page 1 of 23
I. REVISION HISTORY
032403 1.1 Updated.
040403 1.2 Added Profile VIDEO SERVER SETUP, Section 3.b.
070803 1.3 Revised Section 3.b., VIDEO SERVER SETUP.
Added Section 9, TRIM EXISTING CLIP.
120103 1.4 Company header information revised.
Added DNF Controls Limited Warranty.
052804 1.5 Updated SETUP MENU.
070604 1.6 Updated product name.
111004 1.7 Added Gang description and Preroll function.
052705 1.8 Updated to conform to current software.
012306 1.9 Minor corrections
Page 2 of 23 DMAT-O-42 Sports Controller, Odetics Protocol
Getting Started
II. SYSTEM DESCRIPTION
The DMAT-O Sports Controller provides the same functionality found on the
popular sports replay systems, and meets the needs of the demanding sports
replay operators.
Operators may easily generate slow-motion instant replays as well as build,
manage and playout highlight lists with minimal key presses. DMAT-O’s easy
to read display provides fast access to required information and metadata.
Utilizing the simultaneous record and playback capability of th e video server,
DMAT-O gives the operator control over the production process so they Don’t
Miss A Thing.
The DMAT-O consists of DNF’s most robust controller, the ST400, with Sports
Control software. The DMAT-O will control most video servers with the
following capabilities:
Support Odetics Broadcast control protocol.
Provide at least 1 Record Channel and 1 Playback Channel with
common storage.
Definitions
Throughout this document, DDR, VDR & Video Server w ill be referred to
collectively as “Video Server.”
Words surrounded by brackets, for example, [ENTER], refer to keys on the
DMAT-O.
[XXX] + [XXX] refers to a combination of more that one key. Press and hold
the first key, then press the second key. Keys may be released in any order.
Words surrounded by “curly” brackets in bold/italic type, {UPDATES}, are
softkeys on the DMAT-O.
The 6 keys located directly below the Graphic LCD display are referred to as
“Softkeys.” The function assigned to each key will change during operation of
the device. The bottom line of the display shows the current function assigned
to each softkey.
DMAT-O-42 Sports Controller, Odetics Protocol Page 3 of 23
III. SYSTEM INSTALLATION
Refer to the Connection Diagram.
A. DMAT-O Sports Controller
1. Plug one end of a standard 9-conductor, RS422 serial cable into the
VTR1 connector on the rear of DMAT-O. Plug the other end of the
cable into the 9-pin RS422 connector on the Video Server
associated with Playback Channel 1.
2. Plug one end of a standard 9-conductor, RS422 serial cable into the
VTR2 connector on the rear of DMAT-O. Plug the other end of the
cable into the 9-pin RS422 connector on the Video Server
associated with Playback Channel 2.
3. Connect the supplied POWER SUPPLY, APX#4108, into the POWER
connector on the rear of DMAT-O. Plug the Power Supply into an
outlet, 90 VAC - 240 VAC.
4. Connect unbalanced “Time Of Day” time source (LTC) to the LTC
Input connector on the rear of DMAT-O, using a BNC cable
5. Connect Black Burst Signal to the ref. Video Connector on the back
of the DMAT-O using a BNC cable.
B. Video Server Setup
Select ODETICS Broadcast communications protocol on the VIDEO SERVER
playback channels to be controlled.
For PROFILE Video Server only (if planning to use in Drop Frame):
1. On VDRPanel, use the mouse to select the playback channel
assigned to P1 (VTR1) on DMAT-O.
2. Select OPTIONS pull down menu.
3. Select DROP FRAME.
4. On VDRPanel, use the mouse to select the playback channel
assigned to P2 (VTR2) on DMAT-O.
5. Select OPTIONS pull down menu.
6. Select DROP FRAME.
7. Connect the camera outputs/source video to the record channels
(up to 4)
8. Assign each record channel a unique name (REC 1, REC 2, REC 3,
REC 4).
Page 4 of 23 DMAT-O-42 Sports Controller, Odetics Protocol
9. Manually (on each channel) start the record process before
beginning of event.
NOTE – All record and playback clips must be located in the “Default”
directory.Installation is complete.
DMAT-O-42 Sports Controller, Odetics Protocol Page 5 of 23
C. Connection Diagram
Page 6 of 23 DMAT-O-42 Sports Controller, Odetics Protocol
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.