DMP Electronics SDM SST Series, SDM-SST-4G-V, SDM-SST-8G-V, SDM-SST-32G-V, SDM-SST-16G-V User Manual

SDM SST SATA DOM User Manual

SDM SST SATA DOM

SDM-SST-4G-V
SDM-SST-8G-V
SDM-SST-16G-V
SDM-SST-32G-V

SDM SST SATA DOM User Manual

Copyright

The information in this manual is subject to change without notice for continuous
improvement in the product. All rights are reserved. The manufacturer assumes no
responsibility for any inaccuracies that may contain in this document, and makes no
commitment to update or to keep current information contain in this manual.

No part of this manual may be reproduced, copied, translated or transmitted, in whole or
in part, in any form or by any means without the prior written permission of the DMP
Electronics Inc.

Copyright 2018 DMP Electronics Inc.

Special Notice to Users

DMP Electronics Inc. provides no warranty with regard to this manual, the software, or
other information contained herein and hereby expressly disclaims any implied
warranties of merchantability or fitness for any particular purpose with regard to this
manual, the software, or such other information. In no event shall DMP Electronics be
liable for any incidental, consequential, or special damages, whether based on tort,
contract, or otherwise, arising out of or in connection with this manual, the software, or
other information contained herein or the use thereof.

DMP Electronics reserves the right to make any modification to this manual or the
information contained herein at any time without notice. The software described herein
is governed by the terms of a separated user license agreement or label sticker.

This product contains software owned by DM&P and licensed by third parties. Use of
such software is subject to the terms and conditions of license agreements enclosed
with this product. Software specifications are subject to change without notice and may
not necessarily be identical to current retail versions.

Updates and additions to software may require an additional charge. Subscription to
online service providers may require a fee and credit card information. Financial
services may require prior arrangements with participating financial institution.

DMP Electronics Inc.

SDM SST SATA DOM User Manual

Contents

Chapter 1 Product Introduction

1.1 Overview……………………………………………………………….….….2

1.2 Product Features………………………………………………………….….2

Chapter 2 Specifications

2.1 Environmental Specifications…………………………………………4

2.2 System Reliability………………………………………………………4

2.3 Power Requirement……………………………………………………5

2.4 RoHS compliance…………………………………………………….5

Chapter 3 Theory of operation

3.1 Overview………………………………………………………….…………..7

3.2 SATA II Controller……………………………………………………….……7

3.3 Error Detection and Correction………………………………………………7

3.4 Wear-Leveling………………………………………………………………...7

3.5 Bad Blocks Management…………………………………………………….8

Chapter 4 Installation Requirements

4.1 SST SATA DOM Pin Directions.........……….……………..………………10

4.2 Electrical Connections for DMP SST SATA DOM..………………….……10

4.3 Device drive…………………………………………………………………10

Chapter 5 Specifications

5.1 Pin Assignment………………………………….……………………….…12

5.2 Mechanical Dimensions…………………………………………………....12

5.3 Performance………………………………………………………………...12

5.4 Seek Time…………………………………………………………………...13

5.5 NAND Flash Memory……………………………………………………….13

Chapter 6 Product ordering information

6.1 Ordering information………………………………………………………...15

DMP Electronics Inc.

SDM SST SATA DOM User Manual

1

Chapter1

DMP Electronics Inc.

SDM SST SATA DOM User Manual

2

Model Type

Read Performance

Write Performance

SDM-SST-4G-V

35.00 MB/s

10.00 MB/s

SDM-SST-8G-V

35.00 MB/s

10.00 MB/s

SDM-SST-16G-V

70.00 MB/s

20.00 MB/s

SDM-SST-32G-V

70.00 MB/s

30.00 MB/s

1. Product Introduction

1.1 Overview

DMP SDM SST Serial ATA Disk on Module (SDM SST SATA DOM) supports SATA II
standard (3.0Gbps) interface with good performance and thus performs faster data
transfer rate. Moreover, DSDM SST SATA DOM is designed with SST microchip as the
smallest form factor size that could enhance compatibility with various design applications.
Another advanced design is the connector with latch and thus such innovative mechanical
design could improve data transfer reliability while device operating.

SDM SST SATA DOM is also suitable in industrial field. It effectively reduces the
booting time of operation system and the power consumption is less than hard disk
drive (HDD). It can work under harsh environment. SDM SST SATA DOM complies with
ATA protocol, no additional drives are required, and it can be configured as a boot
device or data storage device.

1.2 Product Features

‧Interface: Serial ATA II (3.0Gbps)
‧Capacity: 4GB ~ 32GB (MLC)
‧Read/ Write Performance: (In MB/s)

Table 1: Read/ Write Performance

‧Access time: 0.3 ms
‧Error Correction Function

Built-in ECC corrects up to 15-bit per 512-Byte

‧Dimension: 30 x 21 x 4.8mm

DMP Electronics Inc.

SDM SST SATA DOM User Manual

3

Chapter2

DMP Electronics Inc.