Page 1
PPC-104T User’s Manual IUMPPC104T-01 Ver.1.0A Mar, 2016 i
User’s Manual
PPC-090T
DMP Vortex86 DX2 / DX3 Processor
Compact Panel PC with 9” Touchscree n
PPC-090T-D2 Series w ith DX2 processor
PPC-090T-D3 Series w ith DX3 processor
(Revision 1.4A)
Page 2
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 i
REVISION
DATE VERSION DESCRIPTION
2014/1/22 Version 1.0A New Release
2014/3/11 Version 1.1A Add
4.3 Serial Ports Setting (RS232/422/485)
2015/9/15 Version 1.2A Change the SPEC of Section 3.1
1. Add the type with 2GB DRAM solution
2016/1/6 Version 1.3A 2. Correct LED backlight lifetime
3. Doesn't support DOS Touch Driver
1. Change J33~J36 connectors as optional
2016/4/28 Version 1.4A (They are for I/O Extension board.)
2. Add the information of DX3 & extension
board.
3. Correct the weight of whole system.
Page 3
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 i
COPYRIGHT
The information in this manual is subject to change without notice for
continuous improvement in the product. All rights are reserved. The
manufacturer assumes no responsibility for any inaccuracies that may
be contained in this document, and makes no commitment to update or
to keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or
transmitted, in whole or in part, in any form or by any means without the
prior written permission.
Copyright 2016
Manual # IUMPPC090T-01 Ver.1.4A Apr, 2016
TRADEMARKS ACKNOWLEDGMENT
Vortex86DX2 and Vortex86DX3 are the registered trademark of DMP
Electronics Inc. Other brand names or product names appearing in this
document are the properties and registered trademarks of their
respective owners. All names mentioned herewith are served for
identification purpose only.
This Manual is for the PPC-090T.
Page 4
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 ii
SAFETY INFORMATION
Read these Safety instructions carefully.
Please carry the unit with both hands, handle carefully.
Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
Do not expose your Panel PC to rain or moisture in order to prevent
shock and fire hazard.
Input voltage rated +12 ~ 24 VDC
Operating temperature between 0~+50°C (+32~+122°F).
Keep PPC-090T away from humidity.
When a Compact Flash Card or a SATA Slim is the main operating
system storage, please turn off power before inserting or removing.
Do not open t he cabinet to avoid electrical shock. Refer to your
nearest dealer for qualified personnel servicing.
Never touch un-insulated terminals or wire unless your power
adaptor is disconnected.
Locate your Panel PC as close as possible to the socket outline for
easy access and to avoid force caused by entangling of your arms
with surrounding cables from the Panel PC.
USB connectors are not supplied with Limited Power Sources.
If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.
WARNING!
DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS
(ENCASING) OF THIS PRODUCT. PLEASE CONTACT YOUR DEALER
FOR SERVICING FROM QUALIFIED TECHNICIAN.
Page 5
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 iii
Content
Content ....................................................................................................... iii
Ch. 1 General Information ............................................................................ 1
1.1 Product Description ............................................................................ 2
1.2 Product Specifications ........................................................................ 3
1.3 Inspection standard for TFT-LCD Panel .............................................. 5
1.4 Product Dimensions ............................................................................ 8
1.5 Panel Mounting Instruction ............................................................... 10
1.6 Ordering Information ......................................................................... 12
Ch. 2 System Installation ............................................................................ 13
2.1 CPU Board Outline ........................................................................... 14
2.2 Connector Summary ......................................................................... 15
2.3 Connector Pin Assignments .............................................................. 16
2.4 External I/O Overview ....................................................................... 18
2.5 External I/O Pin Assignment ............................................................. 19
2.6 Watchdog Timer ................................................................................ 20
Ch. 3 Hardware Installation ........................................................................ 21
3.1 Installing the SATA Slim .................................................................... 22
3.2 Installing the Compact Flash ............................................................. 23
Ch. 4 Driver Installation .............................................................................. 24
4.1 PPC-090T Development Note .......................................................... 26
4.2 BIOS Default Setting ......................................................................... 27
4.3 Serial Ports Setting (RS232/422/485) ............................................... 28
Ch. 5 Extension I/O (Optional) .................................................................... 35
5.1 Extension I/O Overview (Optional) .................................................... 36
5.2 Extension I/O Pin Assignment (Optional) .......................................... 37
Warranty ..................................................................................................... 38
Page 6
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 1
Ch. 1
General Information
1.1 Product Description
1.2 Product Specifications
1.3 Inspection standard for TFT-LCD Panel
1.4 Product Dimensions
1.5 Mounting Instruction
1.6 Ordering Information
Page 7
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 2
1.1 Product Description
DM&PTechnology Inc. is proudly going to release a brand new Panel PC,
which offers fanless design, low power consumption, and IP65 front panel.
The PPC-090T is powered by DMP’s Vortex86DX2 and DX3 SoCs, the 3rd
generation SoCs of Vortex86 family, and dual -channel 1GB / 2GB DDRII
(DDDRIII) chipset that handles processing more efficiently and provides
faster performance. The resistive touch panel with LED backlight TFT LCD
increases operation convenience and visibility in outdoor environments. The
ultra-compact and thin exterior design is perfect for the present demanding
embedded and productive applications.
The new PPC-090T inherited PDX/PMX-series’ smooth appearance and
ultra-texture aluminum exterior design to make your industrial applications look
more stylish. The versatile I/O ports, IP65 front panel, 10/100Mps Ethernet,
GIGA high-speed Ethernet, WLAN, etc. can fulfill fundamental functions. Our
consistent advantages feature stable performance, extended working
temperature support, low power consumption and f anless design. The
expandable customize I/O ports can be acco mmodated connectivity
requirements to industrial machine platforms and industrial automation
equipment’s needs.
The PPC-090T supports Windows Embedded CE 6.0, Windows
Embedded Compact 7, Windows Embedded Standard 2009, Windows
Embedded Standard 7 and Li nux to meet ready-to-market demand and
provide competitive advantages for customers.
Page 8
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 3
1.2 Product Specifications
CPU BOARD SPECIFICATIONS
CPU DM&P Vortex86DX2- 933MHz / DX3-1GHz
Cache
DX2: L1:16KB I-Cache, 16KB D-Cache
L2: 256KB Cache
DX3: L1:32KB I-Cache, 32KB D-Cache
L2: 512KB Cache
BIOS AMI BIOS
Memory 512MB/1GB/2GB DDR2(DDR3) onboard
Watchdog Timer
Software Programmable from
30.5u to 512 seconds x 2 sets
LAN
Integrated 10/100M Ethernet X1
Giga Ethernet (Optional) X1
Audio HD Audio-Realtek ALC262 CODEC
Internal Drives
Compact Flash Type I / II Slot
SATA SLIM
SD Slot (Optional)
I/O
RS-232/422/485 x 2
USB Ports (Ver2.0) x 3
PS/2 KB
Audio-Out
RJ-45 Port x 1
GIGA Ethernet Port X 1 (Optional)
MECHANICAL & ENVIRONMENT
Power Requirement +12 ~ 24VDC
Power Consumption +24VDC@ 1A
Operating
Temperature
0~+50°C (+32~+122°F) /
-20~+60°C (-4~+140°F; DX2 with 800MHz)
Page 9
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 4
Storage Temperature -30~+70°C (-22~ +158°F)
Operating Humidity
0% ~ 90% Relative Humidity,
Non-Condensing
Dimensions 242x156.5x44mm (9.68"x6.26"x1.76")
Weight 1.36 Kg
Protection IP65 Front Panel
Certification CE / FCC / VCCI / Vibration / Shock
LCD SPECIFICATIONS
Display Type 9” WSVGA TFT LCD
Backlight Unit LED
Display Resolution 1024(W) x 600(H)
Brightness (cd/m2) 300 nits
Contrast Ratio 500 : 1
Display Color 262,144
Pixel Pitch (mm) 190.5 (H) x 189 (V)
Viewing Angle Vertical 140o, Horizontal 160o
Backlight Lifetime 18,000 hrs
TOUCHSCREEN
Type Analog Resistive
Resolution Continuous
Transmittance 80%
Controller PS/2 interface
Software Driver Linux / WinCE / Windows XP
Durability 1 million
Page 10
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 5
1.3 Inspection standard for TFT-LCD Panel
DEFECT TYPE LIMIT
Not
e
VISUAL
DEFECT
INTERNAL
SPOT
φ＜0.15mm
Ignore
Note
1
0.15mm≦φ≦0.5mm N≦4
0.5mm＜φ
N=0
FIBER
0.03mm<W≦0.1mm, L≦5mm N≦3
Note
1
1.0mm＜W, 1.5mm＜L
N=0
POLARIZER
BUBBLE
φ＜0.15mm
Ignore
Note
1
0.15mm≦φ≦0.5mm N≦2
0.5mm＜φ
N=0
Mura It’ OK if mura is slight visible through 6%ND filter
ELECTRI
CAL
DEFECT
BRIGHT DOT
A Grade B Grade
C Area O Area Total C Area O Area Total
Note
3
N≦0 N≦2 N≦2 N≦2 N≦3 N≦5
Note
2
DARK DOT
N≦2 N≦3 N≦3 N≦3 N≦5 N≦8
TOTAL DOT
N≦4 N≦5 N≦6 N≦8
Note
2
TWO ADJACENT DOT
N≦0
N≦1
pair
N≦1
pair
N≦1
pair
N≦1
pair
N≦1
pair
Note
4
THREE OR MORE
ADJACENT DOT
NOT ALLOWED
LINE DEFECT NOT ALLOWED
(1) One pixel consists of 3 sub-pixels, including R, G, and B dot. (Sub-pixel = Dot)
(2) Little bright Dot acceptitable under 6% ND-Filter.
(3) If require G0 grand (Total dot N≦0), please contact region sales.
Page 11
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 6
[ Note 1 ] W: Width[mm]; L: Length[mm]; N: Number; φ: Average Diameter.
(a) White / Black Spot (b) Polarizer Bubble
[ Note 2 ] Bright dot is defined through 6% transmission ND Filter as following.
[ Note 3 ] Display area
C Area: Center of display area O Area: Outer of display area
[ Note 4 ] Judge the defect dot and the adjacent dot as following. Allow below
(as A, B, C and D status) adjacent defect dots, including bright and dark adjacent
dot. And they will be counted 2 defect dots in total quantity.
Page 12
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 7
R
R
G
G
R
G
R
R
G
G
R
G
R
R
G
G
R
G
R
R
G
G
R
G
R
R
G
G
R
G
R
R
G
G
R
G
R
R
Defect Dot
Adjacent Dot
A
B
C
D
The defects that are not defined above and considered to be problem shall
be reviewed and discussed by both parties.
Defects on the Black Matrix, out of Display area, are not considered as a defect
or counted.
Page 13
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 8
1.4 Product Dimensions
Page 14
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 9
Page 15
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 10
1.5 Panel Mounting Instruction
1. Cut a mounting hole in the panel. (Refer to PPC‐090T Dimensions
on page 11~12.) (Note 1)
2. Check and remove the twelve M3 screws in a diagonal pattern as
image below if necessary.
3. Place PPC‐090T face‐down on a clean, flat surface.
4. Slide the panel cutout around the back of PPC‐090T, until the panel
rests directly on the gasket. Make sure the screw holes align with
the screw holes on PPC‐090T.
5. The screw size is M3*L (L=wall thickness + 6.0mm) (Note 2)
6. Insert all twelve M3 screws into the screw holes. (Note 2)
7. Finger-tighten the M3 screws. Finish tightening the M3 screws in a
diagonal pattern using an M3 screw driver (see the image as below);
maximum torque 1.18Nm (12 kgf‐cm).
Page 16
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 11
Note 1:
It is strongly recommended that a pr ofessional machine shop cut the
mounting hole in the panel.
Note 2:
The length for all twelve M3 screws will be according to the thickness of
mounting panel. For example: The l ength of standard M3 screws for
PPC-090T is 6mm. If the thickness of your mounting panel is 3mm and
washer thickness is 1mm, you have to use 10mm M3 screw.
Page 17
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 12
1.6 Ordering Information
PART NUMBER
DESCRIPTION
PPC-090T-D2N4N 9” Panel PC w/DX2/1GB Memory
3USB/AUDIO/LAN/2COM/DC12~24V
PPC-090T-D2N4N-GE 9” Panel PC w/DX2/1GB Memory
3USB/AUDIO/LAN/GIGA LAN/2COM/
DC12~24V
PPC-090T-D2N4N-G7CP 9” Panel PC w/DX2/1GB Memory
3USB/AUDIO/LAN/GIGA LAN/7COM/
PoE
PPC-090T-D2W4N-GE 9” Panel PC w/DX2-800MHz/1GB
Memory/3USB/AUDIO/LAN/GIGA
LAN/2COM/DC12~24V/Wide Temp
PPC-090T-D3G4N 9” Panel PC w/DX3/1GB Memory
3USB/AUDIO/LAN/2COM/DC12~24V
PPC-090T-D3G4N-GE 9” Panel PC w/DX3/1GB Memory
3USB/AUDIO/LAN/GIGA LAN/2COM/
DC12~24V
PPC-090T-D3G5N 9” Panel PC w/DX3/2GB Memory
3USB/AUDIO/LAN/2COM/DC12~24V
PPC-090T-D3G5N-GE 9” Panel PC w/DX3/2GB Memory
3USB/AUDIO/LAN/GIGA LAN/2COM/
DC12~24V
PPC-090T-D3G5N-G7C 9” Panel PC w/DX3/2GB Memory
3USB/AUDIO/LAN/GIGA LAN/7COM/
DC12~24V
★ Please contact your region sales for more ordering part numbers.
Page 18
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 13
Ch. 2
System Installation
2.1 CPU Board Outline
2.2 Connector Summary
2.3 Connector Pin Assignments
2.4 External I/O Overview
2.5 External I/O Pin Assignment
2.6 Watchdog Timer
Page 19
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 14
2.1 CPU Board Outline
PPC CPU Board
Page 20
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 15
2.2 Connector Summary
No. Description Type of Connections Pin #
J1 Power Terminal Connector External Power Plug 3-pin
J3
COM1 (RS232/422/485)
External D-Sub Male Connector 9-pin
J4 USB External USB Connector 6-pin
J5 USB External USB Connector 6-pin
J6 PS/2Keyboard External Mini DIN Socket 6-pin
J7 USB External USB Connector 6-pin
J8
USB (WLAN Optional)
Internal USB Connector 5-pin
J11 Ethernet External RJ45 Connector 8-pin
J12 GIGA Ethernet External RJ45 Connector 8-pin
J14
COM2 (RS-232/422/485)
2.0mm 10-pin box header 10-pin
J16
SD Card Slot (Optional)
Internal SD Card Socket
J19
VGA (Reserved)
2.0mm 10-pin box header 10-pin
J25 SATA Slim Slot Internal SATA Slim Socket
J30 Audio Line-Out 1.25mm Phone Jack 2-pin
J33
GPIO-X3 (Optional)
PH2*25F(2.0)-7.5mm/P2N71-2XX 50-pin
J34
GPIO-X1 (Optional)
PH2*25F(2.0)-7.5mm/P2N71-2XX 50-pin
J35
GPIO-X4 (Optional)
PH2*15F(2.0)-7.5mm/P2N71-2XX 30-pin
J36
GPIO-X2 (Optional)
PH2*25F(2.0)-7.5mm/P2N71-2XX 50-pin
CF1 CF Card Socket CF Type I/II Socket
Page 21
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 16
2.3 Connector Pin
Assignments
J1: Power Terminal Connector
J3 & J14: COM1 & 2 (RS232/422/485)
J4: USB
J5: USB
J7: USB
J8: USB (WLAN Optional)
J6 : PS/2Keyboard
J19: VGA (Reserved)
Pin # Signal Name
1 +12~24V
2 GND
3 FG
Pin # Signal Name Pin # Signal Name
1
DCD1/422TX-/
RS485-
2
RXD1/422TX+
/RS485+
3 TXD1/422RX+ 4 DTR1/422RX-
5 GND 6 DSR1
7 RTS1 8 CTS1
9 RI1
Pin # Signal Name Pin # Signal Name
1 VCC 2 USBD2-
3 USBD2+ 4 GND
5 GND 6 GND
Pin # Signal Name Pin # Signal Name
1 VCC 2 USBD3-
3 USBD3+ 4 GND
5 GND 6 GND
Pin # Signal Name Pin # Signal Name
1 VCC 2 USBD4-
3 USBD4+ 4 GND
5 GND 6 GND
Pin # Signal Name Pi n # Signal Name
1 VCC 2 USBD1-
3 USBD1+ 4 GND
5 GND
Pin # Signal Name Pin # Sig nal Name
1 KBCLK 2 MSCLK
3 GND 4 KBDATA
5 MSDATA 6 VCC
7 GND 8 GND
9 GND
Pin # Signal Name Pin # Signal Name
1 R OUT 2 GND
3 G OUT 4 GND
5 B OUT 6 GND
7 HSYNC 8 GND
9 VSYNCD 10 GND
Page 22
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 17
J33/J34/J35/J36: GPIO 180-pin (Optional for I/O extension board on Ch.5)
J33 J34 J35 J36
Pin#
Signal
Name
Pin#
Signal
Name
Pin#
Signal
Name
Pin#
Signal
Name
Pin#
Signal
Name
Pin#
Signal
Name
Pin#
Signal
Name
Pin#
Signal
Name
1 GND 2 GND 1 GND 2 SBHE 1 VCC 2 VCC 1 SA7 2 SA6
3 GP34 4 GP35 3
RSTDRV 4 SD7 3 GND 4 GND 3 IRQ3 4 SA5
5 GP36 6 GP37 5 VCC 6 SD6 5 GP90 6 GP91 5 IRQ10 6 SA4
7 GP40 8 GP41 7 SD8 8 SD5 7 GP92 8 GP93 7 IRQ11 8 SA3
9 GP42 10 GP43 9 SD9 10 SD4 9 GP94 10 GP95 9 IRQ12 10 SA2
11 GP44 12 GP45 11 SD10 12 SD3 11 GP96 12 GP97 11 BALE 12 SA1
13 GP46 14 GP47 13 SD11 14 SD2 13 GPCS0 14 GPCS1 13 OSC 14 SA0
15 GP50 16 GP51 15 SD12 16 SD1 15 GP00 16 GP01 15 GND 16 IQ14
17 GP52 18 GP53 17 SD13 18 SD0 17 GP02 18 GP03 17 GP10 18 GND
19 GP54 20 GP55 19 GND 20 GND 19 GP04 20 GP05 19 GP12 20 GP11
21 GP56 22 GP57 21
SMEMW 22
IOCHRDY 21 GP06 22 GP07 21 GP14 22 GP13
23 GND 24 GND 23 SMEMR 24 AEN 23
RS485+1
24
RS485-1 23 GP16 24 GP15
25 GP60 26 GP61 25 IOW 26 SA19 25 VBATT 26 FGND 25 GP20 26 GP17
27 GP62 28 GP63 27 IOR 28 SA18 27 VIN 28 VIN- 27 GP22 28 GP21
29 GP34 30 GP65 29 SD14 30 SA17 29 VIN 30 VIN- 29 GP24 30 GP23
31 GP66 32 GP57 31 SD15 32 SA16 31 GP26 32 GP25
33 GP70 34 GP71 33
MEMCS16 34 SA15 33 GP30 34 GP27
35 GP72 36 GP73 35 IOCS16 36 SA14 35 GP32 36 GP31
37 GP74 38 GP75 37
REFRESH 38 SA13 37
XPCIRST
- 38 GP33
39 GP76 40 GP77 39 GND 40 SA12 39 GND 40 GND
41 GP80 42 GP81 41
SYSCLK 42 SA11 41
XPE0_RX
- 42
XPE0_TX
-
43 GP82 44 GP83 43 IRQ7 44 SA10 43
XPE0_RX
+ 44
XPE0_TX
+
45 GP84 46 GP85 45 IRQ6 46 SA9 45 GND 46 GND
47 GP86 48 GP87 47 IRQ5 48 SA8 47
XYPE0_CLK
- 48
XUSBD3
-
49 GND 50 GND 49 IRQ4 50 GND 49
XYPE0_CLK
+ 50
XUSBD3
+
Page 23
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 18
2.4 External I/O Overview
NOTE
1. GIGA LAN, Wireless are optional
2. RS232/422/485 is selected by BIOS setting
RS-232/422/485
USB 2.0 PORT
10/100Mbps
Ethernet
GIGA Ethernet
(Optional)
Audio-Out
PS/2 KB
Power Switch
+12 ~ 24VDC
Page 24
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 19
2.5 External I/O Pin
Assignment
Power Switch
Pin # Status
| ON
O OFF
Power Connector DC-IN +12~24V
Pin # Signal Name
1
+12~24V
2
GND
3
FG
PS/2 Keyboard
Pin # Signal Name
1 KBCLK
2 PMCLK
3 GND
4 KBDAT
5 P MDAT
6 SB5V
J3 &J14: COM1 & 2 -RS232/422/485
(Change mode by BIOS Setup)
Pin # Signal
Name
Pin
#
Signal
Name
1
DCD1
/422TX-
/RS485-
2
RXD1
/422TX+
/RS485+
3
TXD1 /
422RX+
4
DTR1 /
422RX-
5
GND
6
DSR1
7
RTS1
8
CTS1
9
RI1
J4/J5/J7: USB
Pin # Signal Name
1 VCC
2 USB0-
3 USB0+
4 GND
5 GGND
6 GGND
RJ45
Pin # Signal
Name
Pin # Signal
Name
1
FTXD+ 2 FTXD-
3
FRXIN+ 4 NC
5
NC 6 FRXIN-
7
NC 8 NC
GIGA Ethernet (Optional)
Pin # Signal
Name
Pin # Signal
Name
1
FTXD+ 2 FTXD-
3
FRXIN+ 4 NC
5
NC 6 FRXIN-
7
NC 8 NC
Audio Line-Out
Pin # Signal Name
1 GND
2 LOUTL
3 Open Touch
4 Open Touch
5 VREFOUT
Page 25
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 20
2.6 Watchdog Timer
There are two watchdog timers in PPC-090T, we also provide DOS, Linux
and WinCE example for your reference.
Page 26
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 21
Ch. 3
Hardware Installation
PPC-090T supports various kinds of storages for industrial application,
divided into SATA Slim, CompactFlash or SD card (optional).
3.1 Installing the SATA Slim
3.2 Installing the Compact Flash
Page 27
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 22
3.1 Installing the SATA Slim
[SPEC]
JEDEC SFF-8156 standard form factor
53 x 32 x 4.0 mm
SDM-SST-SLIM(M)4G
SDM-SST-SLIM(M)8G
SDM-SST-SLIM(M)16G
SDM-SST-SLIM(M)32G
[STEP]
1. Remove the nine screws in a diagonal pattern as the image below.
2. Place the SATA slim horizontally aligned and gently put into the
socket until you feel a click.
3. Insert all nine screws into the screw holes.
Page 28
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 23
3.2 Installing the Compact Flash
[STEP]
1. Remove the nine screws in a diagonal pattern as the image below.
2. Gently insert the CF card along the track. Caution: Please watch out
for the direction which the CF card has to be face up.
3. Insert all nine screws into the screw holes.
Page 29
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 24
Ch. 4
Driver Installation
4.1 PPC-090T Development Note
4.2 BIOS Default Setting
4.3 Serial Ports Setting (RS232/RS422/RS485)
Page 30
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 25
VGA
The Vortex86DX2 / DX3 processor is integrated RDC Display chip which
is an ultra-low powered graphics chipset with total power consumption at
around 1-1.5 W.
LAN
The Vortex86DX2 / DX3 processor is integrated 10/100Mbps Ethernet
controller that supports both 10/100BASE-T and allows direct connection
to your 10/100Mbps Ethernet based Local Area Network for full interaction
with local servers, wide area networks such as the Internet.
I/O
and I RQ settings can be d one by software with the supplied utility
software, or it can be set for Plug and P lay compatibility. The controller
supports: Half / Full-Duplex Ethernet function to double channel
bandwidth, auto media detection.
AUDIO
The ALC262 series are 4-Channel High Definition Audio Codecs with UAA
(Universal Audio Architecture) featuring two 24-bit stereo DACs and three
20-bit stereo ADCs, they are designed for high performance multimedia
desktop and laptop systems. The ALC262 series incorporates proprietary
converter technology to achieve over 100dB Signal-to-Noise ratio
playback quality; easily meeting PC2001 requirements and also bringing
PC sound quality closer to consumer electronic devices.
OPERATING SYSTEM SUPPORT
The PPC-090T provides the VGA and LAN drivers for Linux, Windows CE,
Windows XP Professional, Win 7, and Windows Embedded standard
( WES2009 / WES7).
PPC-090T also supports most of the popular Linux distributions, for more
detail information, please visit DMP official website: vortex86dx2
Page 31
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 26
4.1 PPC-090T Development Note
< WINDOWS DEVELOPMENT GUIDE >
Windows Embedded CE 6.0 BSP, Windows Embedded Compact 7 BSP,
and Windows Embedded Standard 2009 t rial image with development
notes.
< LINUX INSTALLATION NOTE>
Please visit Linux technical website to get more information at
ftp://ftp.dmp.com.tw/Linux_DEMO/Vortex86_Linux_Support_List.htm.
Page 32
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 27
4.2 BIOS Default Setting
If the system cannot be boot ed after BIOS changes are made, Please
follow below procedures in order to restore the CMOS as default setting.
Press < End > Key, when the power on
Press < Del > to enter the AMI BIOS setup
Press < F9 > to Load Optimized defaults
Press < F10 > to Save configuration changes
and exit setup
Page 33
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 28
4.3 Serial Ports Setting (RS232/422/485)
For DX2 processor:
Please press <Del> to get into the BIOS settings after booting the machine,
and follow the steps below:
[Step 1] Use the arrow key to select the category “Chipset” on the top of
the menu, then select SouthBridge Configuration in the sub menu and
press <Enter>
Page 34
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 29
[Step 2] Use the arrow key to select “TXDEN Serial Port Type
Configuration” and press <ENTER>
[Step 3] Choose the port you would like to change. For example, choose
TXDEN1 for COM1 and press <Enter>. You will then see three options;
select the desired type and press <Enter> to finish the setting.
Page 35
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 30
The Serial Ports setting is finished
[Step 4] Press <Esc> twice to get back to the Top Menu. Use the arrow
key to the category “Exit”, and select the option “Save Changes and Exit”.
Page 36
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 31
Press <Enter> and choose [OK] to keep your changes, then the device
will reboot automatically.
Page 37
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 32
For DX3 processor:
Please press <Del> to get into the BIOS settings after booting the machine,
and follow the steps below:
[Step 1] Use the arrow key to select the category “Advanced” on the top of
the menu, then select "Serial/Parallel Port Configuration" in the sub menu
and press <Enter>
[Step 2] Choose the port you would like to change. For example, choose
"TXDEN1 Support" for COM1 and press <Enter>. You will then see the
options; select the desired type and press <Enter> to finish the setting.
Page 38
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 33
The Serial Ports setting is finished
[Step 3] Press <Esc> twice to get back to the Top Menu. Use the arrow
key to the category “Exit”, and select the option “Save Changes and Exit”.
Page 39
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 34
Press <Enter> and choose [OK] to keep your changes, then the device
will reboot automatically.
Page 40
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 35
Ch. 5
Extension I/O (Optional)
5.1 Extension I/O Overview
5.2 External I/O Pin Assignment
Page 41
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 36
5.1 Extension I/O Overview (Optional)
NOTE:
1. Those COM ports are only for RS232 signals.
2. DSub-25pin only can be set to be either one of COM5 & COM6
or 18-bit GPIO by hardware settings, and user can't change
hardware setting there. Thus, please contact your region sales
person to order correct part number in advance.
Page 42
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 37
5.2 Extension I/O Pin Assignment (Optional)
COM3, 4 and 9 (RS232)
(Change setting by BIOS)
Pin # Signal Name Pin # Signal Name
1
DCD1
2
RXD1
3
TXD1
4
DTR1
5
GND
6
DSR1
7
RTS1
8
CTS1
9
RI1
COM5 & 6 (RS232) or 18-bit GPIO
Pin # Signal Name Pin # Signal Name
1
VCC (+5V_Output)
2
GND
3
DCD5 / GPIO_00
4
TXD5 / GPIO_01
5
RTS5 / GPIO_02
6
RI5 / GPIO_03
7
GND
8
RXD5 / GPIO_04
9
DTR5 / GPIO_05
10
DSR5 / GPIO_06
11
CTS5 / GPIO_07
12
GND
13
VCC (+5V_Output)
14
GND
15
DCD6 / GPIO_10
16
TXD6 / GPIO_11
17
RTS6 / GPIO_12
18
RI6 / GPIO_13
19
GND
20
RXD6 / GPIO_14
21
DTR6 / GPIO_15
22
DSR6 / GPIO_16
23
CTS6 / GPIO_17
24
GND
25
GND
Note:
The pin of "VCC" is for the pull up of GPIO pins if it is nessary for user.
Please do not connect that pin over maximum 8mA because it will cause
system unstable.
Page 43
PPC-090T User’s Manual IUMPPC090T-01 Ver.1.4A Apr, 2016 38
Warranty
This product is warranted to be in good working order for a period of one
year from the date of purchase. Should this product fail to be i n good
working order at any time during this period, we will, at our option, replace
or repair it at no add itional charge except as set forth in the following
terms. This warranty does not apply to products damaged by misuse,
modifications, accident or disaster. Vendor assumes no liability for any
damages, lost profits, lost savings or any other incidental or consequential
damage resulting from the use, misuse of, originality to use this product.
Vendor will not be liable for any claim made by any other related party.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or
faxing the vendor and requesting a R eturn Merchandise Authorization
(RMA) number. Returned goods should always be accompanied by a
clear problem description.
All Trademarks appearing in this manuscript are registered trademark of their
respective owners. All Specifications are subject to change without notice.
Loading...