DMP Electronics eBox-2300SX User Manual

DMP Electronics Inc

DM&P Group

eBox-2300SX

i

COPYRIGHT

The information in this manual is subject to change without notice for continuous
improvement in the product. All rights are reserved. The manufacturer assumes no
responsibility for any inaccuracies that may contain in this document, and makes no
commitment to update or to keep current information contain in this manual.

No part of this manual may be reproduced, copied, translated or transmitted, in whole or
in part, in any form or by any means without the prior written permission of the DMP
Electronics Inc.

©Copyright 2007 DMP Electronics Inc.
Manual No. IUMeBox2300SX-01 Ver.0.1

1

st

Issued Date: Jun 01, 2007

Revised Date: Jun, 2007

SPECIAL NOTICE TO USERS

DMP Electronics Inc. provides no warranty with regard to this manual, the software, or
other information contained herein and hereby expressly disclaims any implied
warranties of merchantability or fitness for any particular purpose with regard to this
manual, the software, or such other information. In no event shall DMP Electronics be
liable for any incidental, consequential, or special damages, whether based on tort,
contract, or otherwise, arising out of or in connection with this manual, the software, or
other information contained herein or the use thereof.

DMP Electronics reserves the right to make any modification to this manual or the
information contained herein at any time without notice. The software described herein
is governed by the terms of a separated user license agreement or label sticker.

This product contains software owned by DM&P and licensed by third parties. Use of
such software is subject to the terms and conditions of license agreements enclosed
with this product. Software specifications are subject to change without notice and may
not necessarily be identical to current retail versions.

Updates and additions to software may require an additional charge. Subscription to
online service providers may require a fee and credit card information. Financial
services may require prior arrangements with participating financial institution.

eBox-2300SX

ii

TRADEMARKS ACKNOWLEDGMENT

eBox-2300SX is the registered trademarks of DMP Electronics Inc.

Microsoft®, Windows® and AMI are registered trademarks of Microsoft Corporation and
American Megatrends, Inc. in the United States and/or other countries respectively.

Other brand names, product names or trade names appearing in this document are the
properties and registered trademarks of their respective owners. All names mentioned
herewith are served for identification purpose only.

OWNER’S RECORD

The serial number of this product is located at the rear panel of your eBox-2300SX
series. Refer to the model and serial number when you contact your nearest dealer or
DMP offices for services. The Model No. of this product is also indicated on the product
label of your gift box as: eBox-2300SX, eBox-2300SX-H, eBox-2300SX-M and eBox­2300SX-JSK.

eBox-2300SX

iii

SAFETY INFORMATION

WARNING

Do not expose eBox-2300 to rain or moisture, in order to prevent shock

and fire hazard.

Never install eBox-2300SX in wet locations.

Do not open the cabinet to avoid electrical shock. Refer to your nearest

dealer for qualified personnel servicing.

Never touch un-insulated terminals or wire unless your power adaptor and

display monitor are disconnected.

Locate eBox-2300SX as close as possible to the socket outline for easy

access and to avoid force caused by entangling of your arms with
surrounding cables from the eBox-2300SX.

When using eBox-2300SX, avoid using or installing the modem to the

serial port during a storm or a lightning.

Do not use the modem or a telephone to report a gas leak in the vicinity of

the leak.

USB connectors are not supplied with Limited Power Sources.

DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS

(ENCASING) OF THIS PRODUCT. PLEASE CONTACT YOUR

NEAREST DEALER FOR SERVICING FROM QUALIFIED TECHNICIAN

.

eBox-2300SX

iv

REGULATORY

FCC CLASS A NOTE

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference in which case the user will be required to
correct the interference at his own expense. Testing was done with shielded cables.
Therefore, in order to comply with the FCC regulations, you must use shielded cables
with your installation.

WARNING

This product complies with EN55022 class A. In a domestic environment this product
may cause radio interference in which case the user may be required to take adequate
measures.

Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus as set out in the interference - causing equipment standard entitled
“Digital Apparatus”, ICES-003 of the Department of Communications.

MANUFACTURER’S DECLARATION OF CONFORMITY

This equipment has been tested and found to comply with the requirements of European
Community Council Directives 89/336/EEC and 73/23/EEC relating to electromagnetic
compatibility and product safety respectively.

ATTENTION

This product has been designed and certified to comply with certain regulatory
requirements pertaining to Information Technology Equipment. This product has not
been designed for use as a medical device. Without limitation of the foregoing, this
product is not intended and has not been certified for use in a hospital or clinical
environment to diagnose, treat, or monitor patients under medical supervision, and is
not intended and has not been certified to make physical or electrical contact with
patients, nor to transfer energy to or from patients and/or to detect such energy transfer
to or from patients.

eBox-2300SX

v

PURCHASE AGREEMENT

PURPOSE:

In accordance to the general commercial conduct of Trust and Fair Trade, herewith
below is the agreement for the protection for both parties, DMP and Users in pursuant of
trading.

PRODUCT DESCRIPTION:

With this product, herewith also known as eBox-2300SX, which is a simplified & an
economical design of an embedded eBox-2300SX for Special Purpose Personal
Computing. The basic specification of this product comprises of the x86 technology
design, and with onboard 128MB System memory, Display, USB, Keyboard, PS2
Mouse, LAN, and Audio Interfaces.

DISTRIBUTION CONVENTION:

1. This Product includes a gift box, an inner case, a PC, a Power adaptor, User’s
Manual, Utilities & Drivers CD, and IDE cable (standard eBox-2300SX
configuration do not have the IDE cable). Upon receiving this product, kindly
please refer to the User’ Manual to check for the contents and appearance of this
product; contact immediately your nearest dealer or DMP office for any defective
or missing parts. The supplier will not be responsible for any reported
discrepancy thereafter the expiration period of 3-days from the date of purchase.

2. In consideration of transportation and the cost of storage, the supplier provides to
the distributors a warranty of 12-months. This warranty covers the failure caused
by hardware breakdown (excluding hard drives), but does not cover the act of
misuse and mishandling.

3. The supplier will not accept unknown post, therefore if you wish to repair or to
return your goods – kindly please contact your nearest dealer to make your
declaration, and at the same time, apply for a RMA number (RMA stands for
Return Merchandise Authorization – please see the RMA form and fill-up for
authorization).

4. The freight for return goods for repair will follow the International customary
practice and convention: Both parties is to pay for freight of one shipment each.
The shipper is required to prepay the freight from the place of origin (This means
that the returnee (user) covers the freight for return goods, while the Supplier
covers the freight for goods after the repair).

5. Obsolete warranty is referred to as: (1) Expiration of warranty or (2) Damage due
to misuse within warranty. The Supplier will be taken into consideration of the
circumstances, to provide repair service with charges expense for obsolete
warranty. This expense includes the cost of material and the cost of labor.

NOTE:

If there is other particular issue not listed in the above conditions, both parties agreed to
follow the General Law of Commerce with fair and reasonable discussion in handling
and resolving the argument.

eBox-2300SX

vi

Table of Contents

CHAPTERS – HEADING PAGE NO.
0

– UNPACKING YOUR EBOX ................................................................ 1

`

PACKING LIST .............................................................................1

`

CHECK BEFORE USE ................................................................... 1

1

– PREFACE ...................................................................................... 2

2

– eBOX-2300SX OVERVIEW ............................................................. 3

3

– EMBEDDED CPU BOARD ................................................................ 4

`

SYSTEM SPECIFICATION ..............................................................4

4

– PERIPHERALS ................................................................................. 5

`

CONNECTING THE POWER ADAPTOR ............................................ 5

`

CONNECTING THE MONITOR ......................................................... 5

`

CONNECTING THE USB ............................................................... 6

`

CONNECTING USB, SPEAKER/EARPHONE & WEB ........................ 6

`

CONNECTING THE KEYBOARD AND MOUSE ................................... 7

`

CONNECTING PRINTER PORT ........................................................7

5

– BIOS.............................................................................................8

`

RECONFIGURING eBox-2300SX ................................................. 8

6

– TECHNICAL SPECIFICATION ............................................................. 9

7

– TAKING CARE YOUR VESA PC .....................................................10

`

STORING...................................................................................10

`

USING CABLES FOR CONNECTION ............................................... 11

`

CLEANING YOUR VESA PC ....................................................... 11

8

– TROUBLESHOOTING....................................................................... 12

`

TROUBLESHOOTING YOUR EMBEDBOX ....................................... 12

`

VESA PC DOES NOT START....................................................... 12

`

BIOS ERROR MESSAGE............................................................. 12

`

“OPERATING SYSTEM NOT FOUND”............................................ 13

A

PPENDIX : ONBOARDCONNECTORS SUMMARY.................................... 14

eBox-2300SX

vii

` SUMMARY TABLE FOR CPU BOARD............................................ 14

`

FRONT CONNECTORS OUTLINE FOR eBOX-2300SX.................... 14

`

REAR CONNECTORS OUTLINE FOR eBOX-2300SX ..................... 15

`

PIN ASSIGNMENTS..................................................................... 16

W

ARRANTY : TERMS AND CONDITION................................................... 18

1

WARRANTY .............................................................................. 18

2

SERVICE AND SUPPORT .............................................................18

3

RETURN MERCHANDISE AUTHORIZATION (RMA) POLICY ............. 18

4

SHIPPING POLICY ...................................................................... 18

eBox-2300SX

1

UNPACKING YOUR EMBEDBOX

Congratulation! You have just acquired eBox-2300SX, the world’s smallest

and compact PC (See Figure 1), please check the followi ng items:

PACKING LIST FOR eBOX-2300SX SERIES

Item Description Q’ty

c

eBox-2300SX VEA PC

1

d

Max. 15-watts External Power Adaptor, Vin: 100~240VAC • 60/50Hz,

1.0A / Vout: +5.0~5.25VDC @ 3A max.

1

* Note: The accessories are subject to change without immediate notice.

CHECK BEFORE USE

c eBox-2300SX d AC Power Adaptor

0

Figure 1

eBox-2300SX

2

PREFACE

eBox-2300SX: VESA PC

eBox-2300SX is a revolutionary device, that is especially designed for limited physical
space and temperature concerns. No matter you are in a jammed office, a crowded
place, or public transportation, it can be easily integrated with a VESA LCD to bring you
eBox-2300SX access at any time.

It can attach to any VESA mounting fixture, allowing it to be securely mounted onto
desks, walls, or buildings, and thereby optimizes your work area. It can also attach
directly to any size LCD for a mobile system for the use at trade shows, presentations,
promotions, etc. Unlike traditional portable laptop design, the eBox-2300SX can be
used with a large size LCD. Furthermore, with FANLESS design, eBox-2300SX is ideal
to be used in the environment where temperature demand is critical.

So, if you are looking for a device that is able to provide you with more mobility & space
but at the same time uses less power consumption, then eBox-2300SX will be surely
meet your need.

The VESA® FDMI™ Standard defines mounting interfaces, hole patterns and
associated cable/power supply locations for LCD monitors, plasma displays and other
flat panel devices. eBox-2300SX is designed to fit this standard to make monitor
attachment quick and easy.

1

eBox-2300SX

3

eBOX-2300SX OVERVIEW

Front Panel

Power LED

The power LED lights up, when
system is turn on.

HDD LED

The HDD LED flashes when the
system is working. Please do not turn
off the system when HDD start running

GPIO (optional)

24-bit GPIO connector.

CF Slot

For connection to Device with CF Card
and Micro Driver.

USB port

For connection to devices with USB
interface(HDD, CD/DVD-ROM,
Memory Stick, etc.)

Back Panel

` Power switch
` DC Power Jack (3-pin)
` PS/2 Keyboard or Mouse (6-pin)
` VGA
` RJ-45 LAN Jack
` Serial Port (option for eBox-

2300SX-JSK)

` USB Port
` Wireless Antenna connector

(optional)

2

eBox-2300SX

4



About Embedded CPU Board

SYSTEM SPECIFICATION

CPU

Vortex86SX SoC (System on Chip)

Main Memory

128MB DDR2

BIOS

AMI BIOS

VGA

XGI Z9S with 32MB DDR2

Resolution up to 1,280x1,024 High Colors

Keyboard and Mouse

PS/2 Keyboard and Mouse

On-Board IDE

Enhanced IDE interface, 44-pin box

header x 1

Peripheral

1. USB V2.0 (host) x 3

2. Serial port x2(available for eBox-

2300SX-JSK)

3. 24-bit GPIO (available for eBox-

2300SX-JSK)

4. MiniPCI socket (available for eBox-

2300SX-JSK)

5. Type I/II CF Slot (Support Micro Driver)

Dimension & Weight

115 x 115 x 35 mm / 505g

Operating System

Suitable for –

Windows Embedded CE

DOS

Linux

3

eBox-2300SX

5

PERIPHERALS

CONNECTING THE POWER ADAPTOR

Power Adaptor

To use eBox-2300SX immediately, take
and use the supplied AC adapter as a
power source. See the left diagram for
visual connection.

Connect the DC power jack of the power
adaptor to the DC Input jack of eBox­2300SX.

Turning ON eBox-2300SX

Switch on power as indicated on the
figure on your left-side, the system will
start automatically.

CONNECTING THE MONITOR

VGA Connection

Depending on your choice of viewing,
select a conventional CRT or the LCD
VGA monitor.

Make your connection by following the
reference diagram from the VGA cable of
your cable to the 15-pin D-Sub VGA port
of eBox-2300SX.

4

eBox-2300SX

6

PERIPHERALS

CONNECTING THE USB

eBox-2300SX provides USB port (Two in front & one at the back).

Front cabinet

USB Ports

The second USB port is available for
connection to USB devices.

CONNECTING SPEAKER/EARPHONE AND LAN

Connecting to LAN

There is an available RJ-45 LAN jack for
connection to the hub of your intranet;
and via your server for internet service
(see diagram for RJ-45 LAN jack).

eBox-2300SX

7

CONNECTING THE KEYBOARD AND MOUSE

PS/2 Keyboard or Mouse (6-pin)

The PS/2 Port is available for connect
Keyboard or Mouse.

C

ONNECTING SERIAL PORT

Serial Ports

The serial port is usually connected to a
serial device like modem (option for eBox­2300SX-JSK

GPIO Ports

24-bit GPIO port
(option for eBox-2300SX-JSK)

eBox-2300SX

8

BIOS

RECONFIGURING eBox-2300SX

1. Take note that AMI BIOS is used in the eBox-2300SX. To reconfigure the eBox­2300SX, depress or hit the <Del> key to enter your BIOS setup main menu.

2. Select from the menu, the desired setup for change.

3. Press <Esc> to go back to main menu.

4. Move “Exit” TAB and select “Save Settings and Exit”, press “Y” to save the

changes that you just made. eBox-2300SX will restart accordingly to your new
setup.

5

eBox-2300SX

9

TECHNICAL SPECIFICATION

Features

Description

CPU Vortex86SX SoC

BIOS AMI BIOS

System Memory Onboard 128MB DDR2

Expansion 1x Mini-PCI connector (option for eBox-2300SX-M)

I/O

MIO 1 x EIDE (44-pin)

2 x RS-232**, 1x PS/2 for K/B or Mouse
1 x RJ-45 Ethernet Connector
1 x Type I/II Compact Flash slot

USB 3 x USB 2.0 Ports (two in front)

Display

VGA

XGI Z9S with 32MB DDR2
External 15-pin D-type female VGA connector

Resolution Up to 1280x1024

Ethernet

Remote Boot ROM Built-in boot ROM function

Mechanical &Environment

Power Requirement+ 5V @ 1080mA

Operating Temperature0 0 ~ 60oC

Operating Humidity 0% - 90% relative humidity, non-condensing

Size (W x H x D)

115 x 115 x 35 mm

Weight 505g

Certification CE,FCC

6

eBox-2300SX

10

TAKING CARE EBOX-2300SX

This section gives you guidelines on using eBox-2300SX – Safe using, Storing and
Handling.

STORING

Do not place eBox-2300SX in a location that is subject to:

Heating sources, such as stove, oven, heater, radiator or air duct
Direct contact from sunlight
Rain or moisture area
Excessive dust accumulation area
High humidity place
Constant or occasional mechanical movement, vibration or shock
Strong magnets or magnetic fields or magnetically unshielded speakers
Ambient temperature of more than 95oF (35oC) or less than 32oF (0oC)

Do not place other electronic device or electrical equipment near eBox-

2300SX. The electromagnetic field of the eBox-2300SX may cause
interference subjecting to malfunction.

Provide adequate air ventilation (circulation) to prevent internal buildup of

heat. Do not place eBox-2300SX near the wall, behind the curtains or
draperies, in between two books that block its ventilation slots. Leave a
space of at least 8 inches (20cm) behind the sides and back panel of the
eBox-2300SX.

Change of environmental temperature: Problems may occur when there is

a sudden change of environmental temperature, or if the eBox-2300SX is
brought directly from a cold location to a warm one, moisture may
condense inside eBox-2300SX. Turn off eBox-2300SX, and contact your
nearest dealer.

Checking the surrounding appliance(s) before using eBox-2300SX. Since

the eBox-2300SX uses high-frequency radio signal and may interface
with radio or TV reception causing interference or poor signal display.
When this happens, relocate the eBox-2300SX by a suitable distance
away from the set.

Do not drop the eBox-2300SX from the working table nor place heavy

objects on top of the eBox-2300SX.

7

eBox-2300SX

11

USING CABLES FOR CONNECTION

To avoid problem, use only the specified interface cables in your

accessory bag. The supplier will not be responsible for the connection
arising from the other unspecified peripheral equipment.

Do not use cut or damaged cables for connection.

CLEANING YOUR VESA PC

Clean the eBox-2300SX with a soft, dry cloth or a soft cloth lightly moistened with a

mild detergent solution.

Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or

benzene, as these may damage the finish of eBox-2300SX.

When a solid object falls or a liquid spills onto the eBox-2300SX, turn off the eBox-

2300SX immediately and unplug the LAN and power cables. Contact a qualified
person or your dealer to check the eBox-2300SX before you use it again.

Always disconnect the power cord from the power source before cleaning the eBox-

2300SX.

eBox-2300SX

12

TROUBLESHOOTING

This section describes the techniques of resolving some basic problems that you
encounter when using eBox-2300SX. For more troubleshooting guidelines, please
contact your nearest dealer for technical support.

TROUBLESHOOTING YOUR VESA PC

A. VESA PC does not start

Make sure the eBox-2300SX is properly secured and plugged into a power source

before it is turned on. Make sure the power indicator shows the power is on. See
section 2 for more information about “eBox-2300SX Overview”.

When the eBox-2300SX is plugged into a power strip or the UPS (Uninterruptible

Power Supply), make sure the power strip or UPS is turned on and working normally.

Check if your VGA or LCD monitor is properly plugged into a power source and

turned on. Make sure the brightness and contrast controls are adjusted correctly.
See the manual that came with your display (monitor) for details.

Check if your power control button does not function, by removing the AC adaptor.

Wait for one minute, and then reattach all power connection before pressing the
power button.

Condensation may cause the eBox-2300SX to malfunction for a while. If this

happens, do not use the eBox-2300SX for at least one hour.

When you have checked all the above guidelines and the eBox-2300SX does not

work. Remove the power adaptor from the eBox-2300SX, unplug the power cord,
and plug it in again. Then turn on the power.

B. BIOS Error Message –

BIOS error message appear when my VESA PC starts

If the BIOS error message appears, press any key to resume or, hit <DEL>to enter
BIOS setup main menu, follow these steps:

1. Press <DEL>, and the BIOS Setup main menu appears, check if HDD is detected
at “Pri Master”. If it is not detected, use “Sel” keys <↑↓> to choose “AUTO” and
then go back to the main menu by pressing <ESC>. Move your cursor down with
“Sel” keys <↓>, and choose “Save Settings and Exit”, a message dialog appears
as seen below, hit <Enter>.

“Save current settings and exit (Y/N)? Y”

2. Go to “Auto Configuration with Optimal Settings” using the “Sel” keys <↑↓>, then
press <Enter>. A message dialog appears as seen below, hit “Y” key and press
<Enter> to save and recover the factory setting.

“Load high default settings (Y/N)? N”

8

eBox-2300SX

13

C. “Operating System Not Found” –

A message indicating that “Operating system not found” appear when
my VESA PC starts (Windows won’t start)

Enter your BIOS setup main menu by pressing <DEL> key, be sure that your C:

drive is enable.

If Windows still does not start, follow these steps to initialize the BIOS:

1. Turn off the eBox-2300SX.

2. Remove any peripheral devices connected to the eBox-2300SX.

3. Restart the eBox-2300SX..

4. Press <DEL> to enter BIOS Setup main menu window.

5. Follow the steps as written in item B. BIOS error message.

For eBox-2300SX : If you have just connect eBox-2300SX to a CD/DVD or USB

Drivers, remove these peripherals.. And restart eBox-2300SX to confirm that the
Windows operating system starts properly. If eBox-2300SX continues to display
the message ”Operating system not found,” and Windows does not start, please
contact your nearest dealer for servicing.

eBox-2300SX

14

ONBOARD CONNECTORS SUMMARY

SUMMARY TABLE FOR CPU BOARD

Nbr Description Type of Connections Pin nbrs.

J1 IDE connector Box Header 22x2 2.0mm 44-pin

J2 CF Device Jumper Close : Master 2-pin

J3 USB (Back) USB Connector 8-pin

J4,J5 USB (Front) USB Connector 8-pin

J6 JTAG 5-pin

J7 RST (Reset) Hear 2x1 2.0mm 2-pin

J8 PS/2 keyboard or Mouse Mini DIN Connector 6-pin

J10 GPIO Box Header 23x2 2.54mm 26-pin

J9,J11 COM Port Box Header 5x2 2.0mm 10-pin

J12 DC 5V Input Mini-Din Connector 3-pin

J14: Mini PCI Mini PCI socket 124-pin

J15 VGA Connector D-Sub Connector 8-pin

LAN LAN RJ-45 8-pin

` FRONT CONNECTORS OUTLINE FOR eBOX-2300SX

APPENDIX

CF Slot USB GPIO port PWR, ACT LED

eBox-2300SX

15

`

REAR CONNECTORS OUTLINE FOR eBOX-2300SX

DC Power Jack PS/2 KB/MS VGA RJ-45 LAN USB

Power Switch Serial Ports (Optional) Wireless ANT (Optional)

eBox-2300SX

16

`

PIN ASSIGNMENTS

J8:PS/2 Keyboard or Mouse – 6-pin Mini-Din
Connector

Pin # Signal Name

1 KBCLK
2 PMCLK
3 GND
4 KBDAT
5 PMDAT
6 SB5V

Power SW – Push Button Switch

Pin # Status

| ON

O OFF

J12: DC-IN (5V) – 3-pin Mini-Din Lock Pin Socket

Pin #

Signal Name

1 VCC

2 GND

3 NC

J3: USB (90

o

)– 4-pin USB Type 1 Connector

(Vert ical Type)

Pin # Signal Name

1 VCC
2 USB0­3 USB0+
4 GND
5 GGND
6 GGND

LAN: RJ-45 Connector

Pin # Signal Name Pin # Signal Name

1 FTXD+ 2 FTXD-

3 FRXIN+ 4 NC

5 NC 6 FRXIN-

7 NC 8 NC

eBox-2300SX

17

`

PIN ASSIGNMENTS

J15: VGA – 15-pin D-Sub Connector

Pin # Signal Name Pin # Signal Name Pin # Signal Name

1 MR 6 GND 11 NC
2 MG 7 GND 12 VCC
3 MB 8 GND 13 HYSYNC
4 NC 9 NC 14 VSYNC
5 GND 10 GND 15 VCC

J10 : GPIO

Pin # Signal Name Pin # Signal Name

1 VCC 2 GND
3 GP10 4 GP00
5 GP11 6 GP01
7 GP12 8 GP02

9 GP13 10 GP03
11 GP14 12 GP04
13 GP15 14 GP05
15 GP16 16 GP06
17 GP17 18 GP07
19 GP34 20 GP30
21 GP35 22 GP31
23 GP36 24 GP32
26 GP37 26 GP33

J4,J5:USB (USB2): For connection to external USB
device –4-pin USB Type 1 Connector (H)

Pin #

Signal

Name

1 VCC
2 USB2­3 USB2+
4 GND
5 NC
6 NC

LEDS: POWER ON/OFF & HDD R/W

LED Color State

Green Power On

Red HDD On

Red Flashes HDD R/W

J9,J11: COM - 9-pin Dsub Connector

Pin #

Signal

Name

Pin #

Signal

Name

1 DCD1 2 RXD1
3 TXD1 4 DTR1
5 GND 6 DSR1
7 RTS1 8 CTS1
9 RI1 -- --

eBox-2300SX

18

TERMS AND CONDITIONS

1. Warranty

The warranty terms for eBox-2300SX are twelve (12) months from the beginning on the
date of invoice. During the warranty period, DMP Electronics Will repair replace the
product covered under this limited warranty.

2. Service and Support

DMP Electronics Inc. provides the technical support for hardware problems with your
system throughout the warranty period. The technical support service is limited to
configuration and operation of eBox-2300SX sold by DMP Electronics Inc. The technical
support service does not offer software tutoring or training.

3. Return Merchandise Authorization（RMA）policy

If the DMP staff or dealer determines that a part is defective. Purchaser must call our
technical support service to obtain an RMA number before attempting to return any part.
Please refer to your nearest dealer for

To obtain an RMA number, Purchaser must follow procedures as below：

1. Complete the DMP Electronics Inc. standard RMA Form and fax back to the RMA
Department.

2. The RMA Number must be used within 7 DAYS

3. The RMA Number must be shown clearly on your shipping label.

4. DMP Electronics Inc. must receive all Returns before a replacement will be sent.

5. The repair cost is depends on the parts, the damage reasons, and whether under
warranty period…etc. The Seller will charge the Purchaser in a reasonable price.

6. A copy of the invoice for the RMA product(s) will also be shipped to Purchaser.

7. The freight of return to Media Stream Tech. is charges to Purchaser account and
accompanied by an RMA number. Any Returns with freight collect will be refused and
returned to you. After Repairing, the cost of freight will be paid by Seller.

8. DMP Electronics Inc. must receive all returned goods within the warranty period.

4. Shipping Policy

The Purchaser must pre-pay shipping for any defective system or parts returned under
the warranty. DMP Electronics Inc. shall not be liable for risk of loss or damage during
shipment of your returned system or parts if you fail to insure the shipment.

All products must be shipped back to DMP Electronics Inc. in original or equivalent
packaging. DMP Electronics Inc. will ship the repaired or replacement product(s) to
Purchaser by freight prepaid. Purchaser assumes the risk of loss. DMP Electronics Inc.
shall not be responsible for failure of the delivery service to make on-time delivery.

W

ARRANTY

eBox-2300SX

19

MEMO