DMP Electronics DIN PC-333x Series User Manual

DIN PC-333x Series

User’s Guide

Copyright

The information in this manual is subject to change without notice for continuous
improvement in the product. All rights are reserved. The manufacturer assumes no
responsibility for any inaccuracies that may contain in this document, and makes no
commitment to update or to keep current information contain in this manual.

No part of this manual may be reproduced, copied, translated or transmitted, in whole
or in part, in any form or by any means without the prior written permission of
DMP Electronics Inc.

Copyright 2014 DMP Electronics Inc.

Special Notice to Users

DMP Electronics Inc. provides no warranty with regard to this manual, the software, or
other information contained herein and hereby expressly disclaims any implied
warranties of merchantability or fitness for any particular purpose with regard to this
manual, the software, or such other information. In no event shall DMP Electronics be
liable for any incidental, consequential, or special damages, whether based on tort,
contract, or otherwise, arising out of or in connection with this manual, the software, or
other information contained herein or the use thereof.

DMP Electronics reserves the right to make any modification to this manual or the
information contained herein at any time without notice. The software described herein
is governed by the terms of a separated user license agreement or label sticker.

This product contains software owned by DM&P and licensed by third parties. Use of
such software is subject to the terms and conditions of license agreements enclosed
with this product. Software specifications are subject to change without notice and may
not necessarily be identical to current retail versions.

Updates and additions to software may require an additional charge. Subscription to
online service providers may require a fee and credit card information. Financial
services may require prior arrangements with participating financial institution.

Trademarks Acknowledgment

The DIN PC-333x Series is the registered trademarks of DMP Electronics Inc.
Microsoft, Windows, and AMI are registered trademarks of Microsoft Corporation
and American Megatrends Inc. in the United States and/ or other countries respectively.

Other brand names, product names or trade names appearing in this document are the
properties and registered trademarks of their respective owners. All names mentioned
herewith are served for identification purpose only.

Safety Information

WARNING

 Do not expose the DIN PC to rain or moisture, in order to prevent shock and fire hazard.
 Never install the DIN PC in wet locations.
 Do not open the cabinet to avoid electrical shock. Refer to your nearest dealer for qualified

personnel servicing.

 Never touch un-insulated terminals or wire unless power of the DIN PC and display monitor

are disconnected.

 Locate the DIN PC as close as possible to the socket outline for easy access and to avoid

force caused by entangling of your arms with surrounding cables from the DIN PC.

 When using the DIN PC, avoid using or installing the modem to the serial port

during a storm or a lightning.

 Do not use the modem or a telephone to report a gas leak in the vicinity of the leak.
 USB connectors are supplied with Limited Power Sources.

DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS

(ENCASING) OF THIS PRODUCT. PLEASE CONTACT YOUR NEAREST

DEALER FOR SERVICING FROM QUALIFIED TECHNICIAN.

Regulatory

FCC Class A Note

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference in which case the user will be required to correct the
interference at his own expense. Testing was done with shielded cables. Therefore, in order to comply
with the FCC regulations, you must use shielded cables with your installation.

WARNING

This product complies with EN55022 class A. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus as set out in the interference - causing equipment standard entitled “Digital Apparatus”,
ICES-003 of the Department of Communications.

Manufacturer’s Declaration of Conformity

This equipment has been tested and found to comply with the requirements of European Community
Council Directives 89/336/EEC and 73/23/EEC relating to electromagnetic compatibility and
product safety respectively.

Attention

This product has been designed and certified to comply with certain regulatory requirements pertaining
to Information Technology Equipment. This product has not been designed for use as a medical
device. Without limitation of the foregoing, it is not intended and has not been certified for use in a
hospital or clinical environment to diagnose, treat, or monitor patients under medical supervision, and is
not intended and has not been certified to make physical or electrical contact with patients, nor to
transfer energy to or from patients and/or to detect such energy transfer to or from patients.

Purchase Agreement

Purpose:

In accordance to the general commercial conduct of Trust and Fair Trade, herewith below is the
agreement for the protection for both parties, DMP and Users in pursuant of trading.

Product Description:

With this product, herewith also known as DIN PC-333x Series, which is a simplified & an economical
design of an embedded device for Special Purpose Personal Computing. The basic specification of
this product is comprised of the x86 technology design, and with onboard 1GB/ 2GB DDR2 System
memory, VGA display, USB, and LAN Interfaces.

Distribution Convention:

1. This Product includes a gift box, an inner case, a PC, and a pluggable Terminal Block. Upon

receiving this product, kindly please refer to the User’ Manual to check for the contents and

appearance of this product; contact immediately your nearest dealer or DMP branch office if
any defective or missing parts found. The supplier will not be responsible for any reported
discrepancy there after the expiration period of 3-days from the received date.

2. In consideration of transportation and the cost of storage, the supplier provides to the
distributors a warranty of 12-months. This warranty covers the failure caused by hardware
breakdown (excluding hard drives), but does not cover the act of misuse and mishandling.

3. The supplier will not accept unknown post, therefore if you wish to repair or to return your
goods – kindly please contact your nearest dealer to make your declaration, and at the same
time, apply for an RMA number (RMA stands for Return Merchandise Authorization – please
ask for RMA form and fill-up for authorization).

4. The freight for return goods for repair will follow the International customary practice and
convention: Both parties are to pay for freight of one shipment each. The shipper is required to
prepay the freight from the place of origin (This means that the returnee (user) covers the
freight for return goods, while the Supplier covers the freight for goods after the repair).

5. Obsolete warranty is referred to as: (1) Expiration of warranty or (2) Damage due to misuse
within warranty. The Supplier will be taken into consideration of the circumstances, to provide
repair service with charges expense for obsolete warranty. This expense includes the cost of
material and the cost of labor.

Note: If there are other particular issues not listed in the above conditions, both parties agree to follow the
General Law of Commerce with fair and reasonable discussion in handling and resolving the argument.

Contents

Chapter 1

02 Unpacking Your DIN PC

Chapter 2

05 DIN PC-333x Series Overview
07 System Specifications
08 Peripherals Connecting

Chapter 3

10 BIOS Reconfiguring
11 Install the Driver
13 Additional Information
14 Linux Installation Guide

Chapter 4

23 Technical Specifications

Chapter 5

29 On board Connectors Summary

30 Pin Assignments

Chapter 6

33 Taking Care of Your DIN PC
35 Troubleshooting

Chapter 7

38 Terms and Condition
38 Warranty
38 Service and Support
38 Re turn Merchandise Authorization (RMA) Policy
38 Shipping Policy

1

Chapter1

2

Unpacking Your DIN PC

Congratulation! You have just acquired DIN PC-333x Series device, please check the following items:

Packing List

Item No.

Description

Q’ty

1

DIN PC-333x Series DIN Rail Mountable PC

1x

2

3-Pin Plug-In Type Vertical Terminal Block

1x

Note: The accessories are subject to change without immediate notice.

Check Before Use

1. DIN PC-333x Series Unit 2. 3-Pin Terminal Block

3

Preface

DIN PC-333x Series: DIN Rail Mounted Mini PC

The DIN PC-333x Series is an innovative device that provides a perfect balance
between performance and energy efficiency. The DIN PC-333x is Fanless designed
with wide operating temperature range of up to 50°C, making it suitable in warehouse
and factory environments.

The DIN PC-333x Series features DMP ultra low power 933MHz Vortex86DX2 CPU,
Onboard 1GB/ 2GB DDR2 RAM, two independent Ethernet, and various I/O ports.
Supported operating systems such as Microsoft Windows Embedded and Linux OS,
users can integrate applications easily with a platform that provides versatile functions
to fulfill diverse requirements.

With compact dimensions of 152 x 104 x 54 mm (W x H x D), the DIN PC-333x Series
fits in small control boxes, as well as directly in a machine or the machine stand.
With DIN rail form factor, it supports DIN rail in top hat rail section EN 50022 version.
All DIN PC-333x Series’ interfaces are on the front side, so it can be cabled up easily.
The DIN PC-333x Series is an ideal choice as the front end embedded controllers for
industrial automation applications.

4

Chapter2

5

DIN PC-333x Series Overview

Front Panel

A: COM1 Port

RS-232/ RS-422/ RS485 port

B: COM2 Port

RS-232/ RS-422/ RS485 port

C & D: COM5 & COM6 Port

RS-232 port x 2

E & F: GPIO P8 & P9

8-bit GPIO port x 2

Available in DIN PC-333x Series GPIO Version

G: RJ-45 LAN

10/100 Mbps

H: RJ-45 G LAN

1 Gbps

I: USB V2.0 Port x 2

For connection to devices with USB interface
(HDD, CD/ DVD-ROM, Memory Stick, etc.)

J: Terminal Block Header

3-Pin pluggable type 5.00 mm Pitch

K: VGA Port

Integrated Graphics Chip/ D-Sub 15-Pin

Rear Panel

L: DIN Rail Mounting Clip

A

B

C

D

E
F G I

H

J

K

L

6

Inside DIN PC-333x Series

M: SD Card Slot

This system is bootable from SD card

N: 7-Pin SATA DOM Socket

Reserved for SATA DOM

O: USB V2.0 Port

Reserve for WiFi Dongle

DIN Rail Information

DIN PC-333x Series supports DIN rail in top hat
rail section EN 50022 version. Please see
dimension (mm) in picture shown below:

M N O

7

System Specification

CPU

Vortex86DX2 (933 MHz)

Main Memory

1GB DDR2
(32-bit DRAM bus, DIN PC-3330 Series)

2GB DDR2
(32-bit DRAM bus, DIN PC-3332 Series)

※ For Windows 7 users, DIN PC-333x
Series supports 32-bit version only, 64-bit
version does not support

BIOS

AMI BIOS

VGA

Resolution up to 1920 x 1440 High Colors

On-Board SATA

SATA 2.0 connector x1 (Internal)

Peripheral

1. USB V2.0 port x 3 (External x 2/ Internal x 1)

2. SD Card slot x 1 (Internal)

3. Serial port x 4 (available in RS-232/ RS-422/
RS-485/ GPIO port, configuration varies from
port to port, check page 23 to 26 for details)

Dimension & Weight

152 x 104 x 54 mm/ 760g

Operating System

Windows 7 Home/ Pro.
Windows 7 Embedded
Windows XP Home/ Pro.
Windows XP Embedded
Windows Embedded CE

Supported Linux Distribution list

Gentoo 4.2
Ubuntu 10.04
Debian 4.0
OpenSUSE 11.4
Fedora Core 5
Whattos Warp30 (Ubuntu 8.10 base)