Page 1
UBB USER MANUAL
What is the UBB?
• DC driver for SL1 Switch or Mini Switch
• 12 to 35VDC input
• Wired and Wireless DMX (Lumen Radio)
• Wi-Fi (ArtNet) / Ethernet
• Upgradable rmware via USB
DMG | User Manual - UBB
1
Page 2
UBB USER MANUAL
2
1
9
4
3
5
10
6
11
8
12
13
18
7
17
14
15
16
1. Menu
• Go to the general menu
2. Back
• Step back in menu
• Lock/unlock UBB when
pressed for 2secs.
3. Switch
• Change between CCT and
intensity control
4. CCT
• Quickly change from 3200°k
to 5600°K
• Enter the preset menu to
store or recall values
5. Dimmer button
• Press to change intensity or CCT
• Select ne or coarse dimming
when pressed
• Navigate through the menu and
push to validate
6. USB plug
• Upgrade the UBB’s rmware
7.
12~30VDC input
8. Connector for Wi antenna
9. Mounting plate for EPS and
Battery mounts
10. Attachement for shoulder
strap
11. DMX IN
12. DMX OUT
13. LAN IN
14. ON/OFF
• Turns SL1 or MINI Switch ON
15.
Door for antennas storage
16. Connector for Wireless DMX antenna
17. 8 pins connector for SL1 Switch
18. 4 pins connector for Mini Switch
DMG | User Manual - UBB
2
Page 3
UBB USER MANUAL
Wireless DMX MODE:
1. Connect the UBB to a power source (DMG EPS, DMG Battery mount or
any 12 to 30VDC power supply)
2. Connect the Mini Switch or SL1 Switch to the UBB
3. Turn on the UBB by selecting which light you are powering (SL1 or Mini)
Four modes are available :
• LOCAL MODE
• DMX MODE
• Wireless DMX MODE
• CUSTOM MODE
LOCAL MODE:
Control the UBB locally with the dimmer button.
• Press the Switch button to change between CCT and
intensity control
• Press CCT button for a quick change between 3200°K
and 5600°K
• Press the dimmer button to select coarse or ne
intensity tuning
DMX MODE:
Control the UBB remotely by cable with the DMX protocol.
• Press the dimmer button to enter the DMX start
number of the UBB
Control the UBB remotely with the Wireless DMX protocol.
• Make sure the Wireless DMX antenna is intalled
• Press the dimmer button to enter the DMX start
number of the UBB
• Validate by pressing go
Wireless DMX dot is red when no signal is received, green
when the UBB is connected to a Wireless DMX emitter.
To synchronize with a new emitter, go back to general menu and enter Wireless
DMX mode again.
CUSTOM MODE:
In custom mode the UBB acts as a translator between
different protocols. It still controls the SL1 Switch or
Mini Switch connected to it.
• Make sure the Wireless DMX antenna is intalled if
sing Wireless DMX.
• Make sure the Wi-Fi antenna is intalled if using Wi-Fi.
• Press the dimmer button to select data input, data
output and DMX address.
• Validate by selecting «Go».
If Wi-Fi input is selected, the UBB creates a Wi-Fi networks with the following
specications:
SSID: UBB serial number
Password: dmglumiere
These informations can be nd in the “info” section of the UBB menu.
Wireless DMX dot is red when no signal is received, green when the UBB is
connected to a Wireless DMX emitter.
• To synchronize with a new emitter, go back to general menu and enter
Wireless DMX mode again.
DMG | User Manual - UBB
3
Page 4
UBB USER MANUAL
CUSTOM MODE
(...)
Wi-Fi dot is red when no signal is received, green when the UBB is connected
to a Wi-Fi device with an Art-Net app enabled.
(Following)
:
UPGRADING THE UBB :
• Download the rmware from the DMG Lumière website:
dmglumiere.com/upgrade
• Copy the le to a USB stick
• Insert the USB key in the UBB.
If a correct le is found on the USB stick, the UBB will prompt an upgrade menu.
• Select YES to upgrade
• Wait for upgrade to nish. The UBB will turn off and on automatically to
activate the upgrade.
INFO
:
Displays the rmware version, the Network name and password for the Wi-Fi
mode.
DMG | User Manual - UBB
4
Page 5
UBB/MAXI CT USAGE EXAMPLE
Light console
Light 1
DMG Lumière lights or any
DMX enabled light
Light 2
Light 1
DMG Lumière lights or any
DMX enabled light
Light 2
Our wireless DMX is compatible with any powered devices.
DMG Lumière lights or any Wireless DMX enabled light
DMG | User Manual - UBB
5
Loading...