USER MANUAL
Full HD (1080P)
EX-SDI/HD-SDI
2Mega Pixel
HD-SDI Camera
2
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform
to all local codes
3
1.Features
---------------------------------
4
2. Menu Construction
---------------------------------
5
3. Dimensions & OSD board configurations
---------------------------------
12
4. Specifications
---------------------------------
16
Contents
4
■ 1/3" 2MEGA SONY CMOS
High definition 12-bit digital image signals offering 2 mega pixels
are obtained with high speed of 30 fps and with low power consumption.
■ High Resolution 1100(Color)/(BW) TV Lines
This camera has realized high resolution of 1100(Color)/(BW) TV lines using the top-notch
full digital image processing, 12 Bit A/D serial signal processing and special algorithm
technologies.
■ DNR (Digital Noise Reduction, 2D+3D)
The DNR technology eliminates noise thus generating a distinct and clear image.
This camera DNR function utilizes both an adaptive 2D filter reducing noise in the
brightness of the image and an adaptive 3D filter reducing caused by movement.
■ DAY&NIGHT (Output the Filter changing signal)
This camera has the Day&Night function which outputs the filter changing signal with
detecting the illumination condition.
■ SMART IR
Brightness of IR and saturation phenomenon are automatically adjusted.
■ OSD (On Screen Display)
This camera supports the OSD function which is used with multi language. And so, the
camera can be controlled bye selecting text displayed on the monitor screen.
■ Privacy Mask Function (16 points)
Privacy masking allows for the 'blanking' of specific areas of a scene, where the
viewing or recording of images is prohibited or undesired.
The technology of this camera allows for the user defined setting of a four point
polygonal mask, which is overlaid onto the video signal output.
■ Support both HD-SDI and EX-SDI
This camera can be used HD-SDI mode or EX-SDI mode. The default is HD-SDI mode.
And you can change mode to EX-SDI mode by using OSD button.
■ POC (Power of Coaxial)
This camera support POC function which enables to transfer power of the camera through
coaxial cable.
Features
☞ How to change mode from HD-SDI to EX-SDI.
Press “Up” button for 3 seconds and then press “Set” button.
If you want to change HD-SDI mode again, press “Down” button for 3seconds and
then press “Set” button.
5
All functions would be set by OSD menu.
The menu consists of the main menu and sub menu.
Sub menu is displayed when user press set key on
each menu, at which you see arrow.
Please hold the “SET” key for a while to enter OSD
menu.
1. LENS
Select lens type.
▶DC/MANUAL
2. FOCUS ADJ
Adjust focus status through this menu.
If this menu is on, bars will be displayed on the monitor and adjust bar height as higher.
3. EXPOSURE
This function can adjust the intensity of radiation
incoming to the camera.
Use the "▲" "▼""◀" "▶" "ⓔ" switch or Joystick to
select a menu item.
1) BRIGHTNESS (0~20)
Sets the screen brightness
2) SHUTTER
Select shutter mode.
▶AUTO/INDOOR/FLICKER
- AUTO
The shutter speed will be operated automatically.
▶INDOOR/OUTDOOR/DEBLUR
INDOOR: Iris
OUTDOOR: Iris + Shutter
DEBLUR: SHUTTER: 1/240+AGC
- MANUAL
Select shutter speed from 1/30 to 1/30K
▶1/30(NT:1/30,PAL:1/25),1/60(NT:1/60,PAL:1/50),
1/120(NT:1/120,PAL:1/100),1/250, 1/700, 1/1.6K, 1/2.5K,
1/5K, 1/7K, 1/10K, 1/30K
-FLICKER
This will prevent possible screen distortion to a mismatch between the vertical sync
Menu construction
6
frequency and the blinking frequency of the lighting.
3) TCS INFO
This function can capture clear image when the object move
fast.
- TCS MODE
Select TCS level
- SPEED: Show the Shutter speed value (1/120 ~ 1/1600)
- DAY/NIGHT: Show the DAY/NIGHT mode (AUTO~EXTERN)
- SMART IR: Show the SMART IR level value
- HLC: Show the HLC on,or off state
4)SENS--UP
Select “Digital Slow Shutter” level (OFF/ 2x, 4x, 8x, 16x, 32x)
5) AGC
Set “Auto gain control” value (1~10)
4. BACKLIGHT
The function is used to set the Back Light Compensation (BLC), High Light Compensation
(HLC) and Wide Dynamic Range (WDR).
▶OFF, WDR, HLC, BLC
1) BLC
BLC Area shows up on the screen
H- POS(0~20):Set the position of BLC area.
V- POS(0~20):Set the position of BLC area.
H- SIZE(0~20):Set the size of BLC area.
V- SIZE0~20): Set the size of BLC area.
OPTION
DESCRIPTION
OFF
MODE1~5
MODE6~10
MODE11~15
MODE16~20
NOT USED
Shutter 1/120~6000 + DN EXT + Smart IR 14
Shutter 1/120~1600+ User DN + User Smart IR
Shutter 1/120~1600 + DN EXT + Smart IR 14 + HLC
Shutter 1/120~1600 + User DN + User Smart IR+ HLC
7
2) HLC
High Light Compensation
▶ON(0~20), OFF
LEVEL: Select HLC level.
COLOR: Select HLC color(CYN, YEL, WHT, BLK, BLU,
RED, MAG, GRN)
3) WDR
Wide Dynamic Range
WEIGHT:LOW/MIDDL/HIGH
5. DAY/NIGHT
The function is used to set the Day/Night function which switches day/Night mode
automatically based on the level of illumination.
1) AUTO
THRESHOLD(0~20): Sets the threshold for identifying
the Night status from the Day status.
MARGIN(0~20): Sets the margin for identifying the Night
status from the Day status.
DELAY: Sets the Night/Day identification transfer time.
SMART IR (OFF/LOW/MIDDLE/HIGH)
Brightness of IR and saturation phenomenon are automatically adjusted.
2) EXTERN
- EXTERN SW
Select the active level.
- DELAY (1~20)
Set the Night/Day identification transfer time
- SMART IR (1~20)
Brightness of IR and saturation phenomenon are
automatically adjusted.
3) COLOR: Only Color
4) B&W: Only B/W
6. WHITE BAL
This function is used to set the White Balance operation which adjusts the color scheme.
1) AUTO: Auto tracking white balance.
2) MANUAL
White balance value can be changed by “R-GAIN” and “B-GAIN” value in manual mode
8
3) AUTO ext: TDN lens Auto trace white balance.
It can be changed in AWC mode only.
4) Preset: when the set color temperature doesn’t meet with user’s environment.
7. DNR
Set up 3D-DNR (Digital Noise Reduction) level.
▶OFF, LOW, MIDDLE, HIGH
8. IMAGE
1) SHARPNESS (1~10)
Select the resolution of the camera.
2) GAMMA (0.45,0.55,0.65,0.75)
Select the GAMMA
3) COLOR GAIN (1~20)
Adjusts COLOR GAIN
4) MIRROR (ON/OFF)
Set up the screen mirror
5) FLIP (ON/OFF)
Set up the screen flip
6) D-ZOOM (1X~16X)
Enlarge the screen with DIGITAL ZOOM.
7) ACE (OFF/LOW/MIDDLE/HIGH)
Select Digital ACE(Advanced Enhance) level
8) DEFOG (OFF/MANUAL/AUTO)
This function does a process of clearing blurred image
caused by fog and snow by analyzing the brightness of
input image and compensating the color of the image.
Select defog level.
9) SHARDING
Set the lens shading.
When you maximize zoom ratio and lens angle of view
is saturated on screen, set to ON to make the lens edge
invisible.
It might happen only if fluorescent light is shined fully on
screen.
10) PRIVACY
The function is used to configure up to 16 privacy masks, where the scene is prohibited or
undesired to be viewed.
And you can also make polygon type privacy mask up to 8 areas.
9
-In case of box type
ZONE NO (0~15): Select 16 areas using left or right
button.
ZONE DISP (ON/OFF): Show up PRIVACY AREA
function on the screen.
H-POS (0~60): H position.
V-POS (0~34): V position.
H-SIZE (0~40): H size.
V-SIZE (0~34): V size.
Y LEVEL(0~20): Adjust the Y LEVEL of the Privacy zone
area
CR LEVEL(0~20): Adjust the B GAIN of the Privacy zone area
CB LEVEL(0~20): Adjust the R GAIN of the Privacy zone area
-In case of polygon type
ZONE NO (0~7): Select 8 areas using left or right button.
ZONE DISP (ON/OFF): Show up PRIVACY AREA
function on the screen.
POS0-X (0~120): H position.
POS0-Y (0~68): V position.
POS1-X(0~120): H size.
POS1-Y(0~68): V size.
POS2-X( 0~120):H position
POS2-Y (0~68):V position.
POS3-X (0~120):H position
POS3-Y (0~68):V position.
Y LEVEL(0~20): Adjust the Y LEVEL of the Privacy
zone area
CR LEVEL(0~20): Adjust the B GAIN of the Privacy
zone area
CB LEVEL(0~20): Adjust the R GAIN of the Privacy zone area
TRANS (0~4): Set the transparency of a color
9. MOTION
The function is used to configure the Motion Detection
operation and Alarm function which sense the
movement of the scene.
DET WINDOW: Press this menu for detail setting.
SENSITIVITY (0~10): Set the motion detection
sensitivity.
10
MOTION OSD (On/Off): select whether motion area appears or not.
TEXT ALARM (On/Off): select whether motion text appears or not.
WINDOW USE (0~3): Select motion areas you desire to
set.
WINDOW ZONE: Select On or Off
DET H-POS(0~60): H position
DET V-POS(0~34): V position
DET H-SIZE(0~60): H size
DET V-SIZE(0~34): V size
10. OPTION
COM
Set camera ID and BAUDRATE for remote control.
This camera supports D-max and Pelco protocol.
In case of box camera can be used this function only.
IMAGE RANGE (Full, Comp, User)
Digital output data scale
FRAME RATE (1080-30p, 720-60p, 720-30p)
Set the frame rate
FREQ
Select input frequency.
COLOR BAR
Select color bar to on or off
CVBS
Select on or off
LANGUAGE
The function is used to select preferred one from the supported languages.
(English/Japanese//Chinese/Korea)
11
CAMTITLE
Camera TITLE display ON/OFF
Set Camera TITLE.(up to 8 characters)
A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,
0,1,2,3,4,5,6,7,8,9
VERSION
Camera VERSION display
11. Exit
SAVE: All the settings of the internal OSD menu are saved.
RESET: All the internal OSD menu settings are reset
☞ Caution
What’s POC
POC(power over coaxial) provides camera power through coaxial cable remotely, so
there’s no need of power cable installation.
Please be advised that following guidelines before you go with POC
- You should use the POC device our D-MAX team offer
- Make sure to use power voltage in accordance with more than 19V 1A
- Non-IR camera gets its power supply from POC device up to 300m
- IR camera’s maximum transmission distance depends on the number of LED.
(24IR camera : max 150m / 30IR or 36IR camera : max 100m / 54IR camera : Max
80m)
- Transmission distance can vary slightly depending on the nature of cable and some
preferential cables are as follows.
(ECX5C cable can be favorable when POC is used. 5CHFBT would help a lot when
only power is transmitted.)
What’s EX-SDI
EX-SDI(Extended Serial Digital Interface) IS the new transmission technology that
remedies existing HD-SDI system’s shortcomings
EX-SDI accompanies 2 times longer transmission distance compared to HD-SDI.
300m transmission distance is guaranteed by using 5CHFBT, ECX5C2V and RG59 but it
differs from cable manufacturer to manufacturers
12
1. BOX CAMERA
Dimensions & OSD Board Configuration
13
2. DOME CAMERA
Dimensions OSD Board
3. VANDAL DOME CAMERA
Dimensions OSD Board
14
4. IR DOME CAMERA (24IR)
Dimensions OSD Board
5. IR VANDAL DOME CAMERA (30IR)
Dimensions OSD Board
15
6. IR BULLET CAMERA (36IR)
Dimensions OSD Board
7. IR BULLET CAMERA (54IR)
Dimensions OSD Board
,
16
1. BOX CAMERA
MODEL
Box Type
Video
Image Sensor
1/2.8” 2.4Mega(1080p) PS-Sony CMOS
Scan mode
Progressive Scan
Total number of pixels
2000(H) × 1241(V)
Number of active pixels
1984(H) x 1097 (V)
Resolution
1,100 TVL
Minimum illumination
0.001Lux with Sense-up(32x)
Video Output
HD-SDI/EX-SDI, SMPTE-292M
S/N Ratio
More than 50dB (AGC Off)
Lens
Mount
CS Mount
Iris
DC Iris
Function
Day & Night
Auto / Day / BW / EXTERN
White Balance
Auto / Auto-ext / Preset / Manual
AGC
Level Setting(1~10)
DNR
Off / Low / Middle / High
Mirror / Flip
Off / On
Privacy Zone / Motion
16 Zones / 4 Zones
Communication
Level (1~20)
Brightness
Auto/Manual(1/30~1/30000)
Shutter
WDR/HLC/BLC
Back light
Auto / Day / BW / EXTERN
POC
Available
Environment
Operating Humidity
30 % ~ 90 % RH
Operating Temp.
- 10°C to 50°
Electrical
Power Consumption
Max 3W
Power Supply
DC12V±10,
Mechanical
Construction
Aluminum body
Dimension
119.8(L)X 67.9(W)X64.7(H)mm
Weight
About 0.5kg
Specifications
17
2. DOME CAMERA
MODEL
Dome Type
Video
Image Sensor
1/2.8” 2.4Mega(1080p) PS-Sony CMOS
Scan mode
Progressive Scan
Total number of pixels
2000(H) × 1241(V)
Number of active pixels
1984(H) x 1097 (V)
Resolution
1,100 TVL
Minimum illumination
0.001Lux with Sense-up(32x)
Video Output
HD-SDI/EX-SDI, SMPTE-292M
S/N Ratio
More than 50dB (AGC Off)
Lens
Lens
3.6mm Fixed MP Lens
2.8~12mm MP VF Lens
Iris
Electric Iris
DC Iris
Function
Day & Night
Auto / Day / BW / EXTERN
White Balance
Auto / Auto-ext / Preset / Manual
AGC
Level Setting(1~10)
DNR
Off / Low / Middle / High
Mirror / Flip
Off / On
Privacy Zone / Motion
16 Zones / 4 Zones
Brightness
Level (1~20)
Shutter
Auto/Manual(1/30~1/30000)
Back light
WDR/HLC/BLC
POC
Available
Environment
Operating Humidity
30 % ~ 90 % RH
Operating Temp.
- 10°C to 50°
Electrical
Power Consumption
Max 2W
Max 2.5W
Power Supply
DC12V±10,
Mechanical
Construction
Plastic body , PC bubble
Dimension
87mm(H) X 81Ø
Weight
About 0.35kg
About 0.4kg
18
3. VANDAL DOME CAMERA
MODEL
Vandal Dome Type
Video
Image Sensor
1/2.8” 2.4Mega(1080p) PS-Sony CMOS
Scan mode
Progressive Scan
Total number of pixels
2000(H) × 1241(V)
Number of active pixels
1984(H) x 1097 (V)
Resolution
1,100 TVL
Minimum illumination
0.001Lux with Sense-up(32x)
Video Output
HD-SDI/EX-SDI, SMPTE-292M
S/N Ratio
More than 50dB (AGC Off)
Lens
Lens
2.8~12mm Varifocal Mega Pixel Lens
Iris
DC Iris
Function
Day & Night
Auto / Day / BW / EXTERN
White Balance
Auto / Auto-ext / Preset / Manual
AGC
Level Setting(1~10)
DNR
Off / Low / Middle / High
Mirror / Flip
Off / On
Privacy Zone / Motion
16 Zones / 4 Zones
Brightness
Level (1~20)
Shutter
Auto/Manual(1/30~1/30000)
Back light
WDR/HLC/BLC
POC
Available
Environment
Operating Humidity
30 % ~ 90 % RH
Operating Temp.
-30°C~60°C(-22°F~140°F)
Electrical
Power Consumption
Max 3W
Power Supply
DC12V±10,
Mechanical
Construction
Aluminum body , PC bubble
Dimension
145(W) x 118.5(H) mm
Weight
About 1.1kg
19
4. IR DOME CAMERA (24IR)
MODEL
IR Dome Type
Video
Image Sensor
1/2.8” 2.4Mega(1080p) PS-Sony CMOS
Scan mode
Progressive Scan
Total number of pixels
2000(H) × 1241(V)
Number of active pixels
1984(H) x 1097 (V)
Resolution
1,100 TVL
Minimum illumination
0.001Lux with Sense-up(32x)
Video Output
HD-SDI/EX-SDI, SMPTE-292M
S/N Ratio
More than 50dB (AGC Off)
Lens
Lens
3.6mm Fixed MP Lens
2.8~12mm MP VF Lens
Iris
Electric Iris
DC Iris
Function
Day & Night
Auto / Day / BW / EXTERN
White Balance
Auto / Auto-ext / Preset / Manual
AGC
Level Setting(1~10)
DNR
Off / Low / Middle / High
Privacy / Motion
Off / On
Mirror / Flip
16 Zones / 4 Zones
Brightness
Level (1~20)
Shutter
Auto/Manual(1/30~1/30000)
Back light
WDR/HLC/BLC
POC
Max. 150m
IR LED
LEDs
24 LEDs (850nm)
Visible Distance
15m
Environment
Operating Humidity
30 % ~ 90 % RH
Operating Temp.
- 10°C to 50°
Electrical
Power Consumption
Max 3.5W
Max 4W
Power Supply
DC12V±10,
Mechanical
Construction
Plastic body ,PC bubble
Dimension
87mm(H) X 81Ø
Weight
About 0.34Kg
About 0.4Kg
20
5. IR VANDAL DOME CAMERA (30IR)
MODEL
IR Vandal Type
Video
Image Sensor
1/2.8” 2.4Mega(1080p) PS-Sony CMOS
Scan mode
Progressive Scan
Total number of pixels
2000(H) × 1241(V)
Number of active pixels
1984(H) x 1097 (V)
Resolution
1,100 TVL
Minimum illumination
0.001Lux with Sense-up(32x)
Video Output
HD-SDI/EX-SDI, SMPTE-292M
S/N Ratio
More than 50dB (AGC Off)
Lens
Lens
2.8 ~ 12mm MP DC Auto Iris Lens
Iris
DC Auto Iris
Function
Day & Night
Auto / Day / BW / EXTERN
White Balance
Auto / Auto-ext / Preset / Manual
AGC
Level Setting(1~10)
DNR
Off / Low / Middle / High
Privacy / Motion
Off / On
Mirror / Flip
16 Zones / 4 Zones
Brightness
Level (1~20)
Shutter
Auto/Manual(1/30~1/30000)
Back light
WDR/HLC/BLC
POC
Max. 100m
IR LED
LEDs
30 LEDs (850nm)
Visible Distance
30m
Environment
Operating Humidity
30 % ~ 90 % RH
Operating Temp.
-30°C~60°C(-22°F~140°F)
Electrical
Power Consumption
Max 4W
Power Supply
DC12V±10,
Mechanical
Construction
Aluminum body ,PC bubble
Dimension
145mm(W) X 118.5mm(H)
Weight
About 1.1Kg
21
6. IR Bullet CAMERAIR (36IR)
MODEL
IR Bullet Type
Video
Image Sensor
1/2.8” 2.4Mega(1080p) PS-Sony CMOS
Scan mode
Progressive Scan
Total number of pixels
2000(H) × 1241(V)
Number of active pixels
1984(H) x 1097 (V)
Resolution
1,100 TVL
Minimum illumination
0.001Lux with Sense-up(32x)
Video Output
HD-SDI/EX-SDI, SMPTE-292M
S/N Ratio
More than 50dB (AGC Off)
Lens
Lens
2.8 ~ 12mm MP DC Auto Iris Lens
Iris
DC Auto Iris
Function
Day & Night
Auto / Day / BW / EXTERN
White Balance
Auto / Auto-ext / Preset / Manual
AGC
Level Setting(1~10)
DNR
Off / Low / Middle / High
Privacy / Motion
Off / On
Mirror / Flip
16 Zones / 4 Zones
Brightness
Level (1~20)
Shutter
Auto/Manual(1/30~1/30000)
Back light
WDR/HLC/BLC
POC
Max. 100m
IR LED
LEDs
36 LEDs (850nm)
Visible Distance
30m
Environment
Operating Humidity
30 % ~ 90 % RH
Operating Temp.
-30°C~60°C(-22°F~140°F)
Electrical
Power Consumption
Max 4W
Power Supply
DC12V±10,
Mechanical
Construction
Aluminum Body, Acrylic Window
Dimension
243.7mm(L) X 83.0mm(H) X 70.8 Ø
Weight
About 0.65Kg
22
7. IR BULLET CAMERA (54IR)
MODEL
IR Bullet Type
Video
Image Sensor
1/2.8” 2.4Mega(1080p) PS-Sony CMOS
Scan mode
Progressive Scan
Total number of pixels
2000(H) × 1241(V)
Number of active pixels
1984(H) x 1097 (V)
Resolution
1,100 TVL
Minimum illumination
0.001Lux with Sense-up(32x)
Video Output
HD-SDI/EX-SDI, SMPTE-292M
S/N Ratio
More than 50dB (AGC Off)
Lens
Lens
2.8 ~ 12mm MP DC Auto Iris Lens
Iris
DC Auto Iris
Function
Day & Night
Auto / Day / BW / EXTERN
White Balance
Auto / Auto-ext / Preset / Manual
AGC
Level Setting(1~10)
DNR
Off / Low / Middle / High
Privacy / Motion
Off / On
Mirror / Flip
16 Zones / 4 Zones
Brightness
Level (1~20)
Shutter
Auto/Manual(1/30~1/30000)
Back light
WDR/HLC/BLC
POC
Max. 80m
IR LED
LEDs
54LEDs (850nm)
Visible Distance
40m
Environment
Operating Humidity
30 % ~ 90 % RH
Operating Temp.
-30°C~60°C(-22°F~140°F)
Electrical
Power Consumption
Max 5.5W
Power Supply
DC12V±10,
Mechanical
Construction
Aluminum body, Acrylic Window
Dimension
100mm(H) X 117mm(W)
Weight
About 1.3Kg
23
24
DISTRIBUTED BY
Loading...