DLO TransDock User Manual

Download

TransDock

USER MANUAL

Important Information 04

About TransDock 05

Product Overview 05

What’s in the Box 05

What You Will Need 05

GettingStarted 06

Using TransDock 08

Detailed Instructions 08

Turning Your TransDock On and Off 09

Finding Empty Radio Frequencies Using IntelliTune 10

Manually Finding Empty Radio Frequencies 10

Using Your Detachable 12V Power Socket 11

Settings+ Features 12

Settings Menu 12

Getting the Best Sound Quality 16

Connections and Additional Features 16

FrequentlyAsked Questions 19

TechSpecs 21

Warranty + Service 22

FCC Statement 23

| 3

2 | DLO TRANSDOCK USERMANUAL

NRTL

C US

Prod

t i on

mon

i t

ore d

The DLOlogo, Digital Lifestyle Outﬁtters, IntelliTune and TransDock are trademarks of Philips ConsumerLifestyle. iPod is atrademark of Apple Inc.,registered in theU.S. and other countries. Printed in China M93053-080728-C

MANUAL

| 5

Important Information

Take time to read this manual before you use your TransDock. It contains important information and notes about operating your product.

Disposal of your old product:

Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused. Please inform yourself about the local separate collection system for electrical and electronic products. Please take the package to your local recycling center.

WARNINGS

• Limit exposure to sunlight to prevent heat build-up.

• Do not disassemble or repair.

• Keep away from high voltage devices.

Do not insert anything other than an appropriate plug that ﬁts the socket, or allow any liquid to get into the socket. Doing so may cause electrical failure, electric shock, or a short circuit. The total combined current for the 12V DC socket should not exceed 10 amps. This accessory outlet should be used for accessories only; do not use a lighter element in this outlet.

4 | DLO TRANSDOCK USERMANUAL

Product Overview

TransDock is an FM transmitter that broadcasts your iPod audio to the FM radio in your car, while simultaneously charging and cradling your iPod. Included with your TransDock is a detachable 12V Power Socket that allows you to simultaneously power another device while enjoying your iPod. TransDock also features IntelliTune technology, which scans the airwaves to ﬁnd the best frequencies for transmitting your music to your FM radio. TransDock also allows you to save preset stations, so you can easily recall the frequencies you use most.

What’s in the Box

1. TransDock Cradle

2. Car Power Adapter

3. Flex Arm

4. Detachable 12V Power Socket

5. iPod touch Support Bracket

6. User Manual

What You Will Need

iPod Car stereo with FM radio 12V auto power outlet

AboutTransDock

| 7

Getting Started

6 | DLO TRANSDOCK USERMANUAL

This section will help with the initial installation of your TransDock.

1. Assemble your TransDock by attaching the Flex Arm to both the Car Power Adapter and the TransDock Cradle.

2. Insert your TransDock into your auto power outlet.

3. Gently slide your iPod onto your TransDock. Your iPod will now begin charging if your car is on.

4. Press the center button on your TransDock to activate IntelliTune. IntelliTune will automatically find the optimal frequency to broadcast your iPod over your car’s FM radio.

5. Tune your car’s FM radio to the frequency displayed on your TransDock.

6. Click Play on your iPod to enjoy your music over your car stereo.

NOTE: The iPod will automatically pause playback when your

TransDock is powered off.

Tune radio to match

Assemble your TransDock

Plug TransDock into power outlet

Insert iPod

Click Play

Activate IntelliTune

CenterButton (IntelliTune)

RightButton

Left Button

FlexArm

Car Power Adapter

5. To activate your TransDock’s IntelliTune feature, press the center button on the TransDock Cradle. Your TransDock will display the word “IntelliTune” as it searches for the optimal frequency. This should only take a few seconds. Once the search is complete, the display will instruct you to tune your radio to the frequency found by IntelliTune.

6. Match the FM station on your radio with the corresponding FM frequency shown on your TransDock display. Click Play on your iPod to enjoy your music over your car’s FM radio.

7. To control the overall volume of your music while using your TransDock, use the car radio’s volume control, not the iPod volume.

NOTE: To simultaneously power another device, connect the detachable 12V

Power Socket into the TransDock. You may now power another device while enjoying your iPod. See Using Your Detachable 12V Power Socket on page 11 for more information.

Turning Your TransDock On and Off

Your TransDock will turn on and off automatically with your car. To manually turn your TransDock on or off while your car power is on, press and hold the center button for approximately 5 seconds.

| 9

UsingTransDock

Detailed Instructions

1. Turn on your car stereo and set it to FM radio mode.

2. Assemble your TransDock by attaching the Flex Arm to both the Car Power Adapter and the TransDock Cradle.

NOTE: For cars that do not need the additional length of the Flex Arm,

you may attach the TransDock Cradle directly to the Car Power Adapter.

3. Insert your TransDock into your auto power outlet.

4. Gently slide your iPod onto your TransDock. Your iPod will now begin charging if your car is on.

NOTE: To ensure the best fit for your particular iPod, press the button on

the upper right side of the TransDock Cradle to extend or contract the circular adapter in the center of the TransDock Cradle. Release the button to lock the adapter’s position.

NOTE: For iPod touch users, you may attach the included iPod touch Support

Bracket, which allows you to position your iPod touch horizontally in the TransDock Cradle. Insert the iPod touch Support Bracket into the center adapter and position it on either side of the TransDock Cradle.

8 | DLO TRANSDOCK USERMANUAL

• Try tuning to a strong station, then backing down two frequencies – for example 103.5 to 103.1. You can often find empty frequencies this way. Note: If that frequency is taken, scan to the next station and try again.

Using Your Detachable 12V Power Socket

The detachable 12V Power Socket allows you to power other devices while enjoying your TransDock. To install, locate the 5.5mm port on the back of the TransDock and insert the 5.5mm jack. This will activate the DC 12V Power Socket.

IMPORTANT: Do not insert anything other than an

appropriate plug that ﬁts the socket, or allow any liquid to get into the socket. Doing so may cause electrical failure, electric shock, or a short circuit. The total combined current for the 12V DC socket should not exceed 10 amps. This accessory outlet should be used for accessories only; do not use a lighter element in this outlet.

| 11

FindingEmpty Radio Frequencies Using IntelliTune

To ﬁnd an empty frequency using IntelliTune:

1. Press the center button on your TransDock. This will activate the IntelliTune search. While searching, the word “IntelliTune Searching” will appear on your TransDock’ display.

2. Once IntelliTune finds an empty frequency, it will display “TUNE TO XXX.X.” Tune your FM radio to the corresponding station and begin enjoying your iPod music over your car stereo.

Manually Finding Empty Radio Frequencies

Your TransDock also allows you to manually tune the transmitter to desired FM frequencies. Simply push the right button to tune to higher stations and push the left button to tune to lower stations.

Tips for manually ﬁnding an empty station:

• Be sure to search the entire spectrum of FM frequencies.

• When using scan/seek on your car’s radio, if your tuner stops on 101 and then jumps to 103, look in the 102 frequencies for empty stations.

10 | DLO TRANSDOCK USERMANUAL

3. Once in Settings Menu, scroll to Preset Store and press the center button to select. Next, scroll to and select the preset number (SET1, SET2, SET3, or SET4) pressing the center button to select. The preset number and frequency will be displayed on your TransDock display.

NOTE: Your new preset will override the last-saved preset, including the

default presets.

Preset Mode

Preset Mode gives you the option to scroll through your presets in Manual Mode. To turn Preset Mode on, follow these simple steps:

1. Press and hold the center button to enter the Settings Menu.

2. Scroll to Preset Mode and press the center button to select. Then choose Preset Mode On and press to select. Now you can scroll through the four presets (P1, P2, P3, P4) in Manual Mode.

3. Leave your TransDock on the desired preset number and tune your radio to the corresponding frequency to begin broadcasting.

| 13

Settings + Features

Settings Menu

To enter the Settings Menu, press and hold the center button on your TransDock. Then, press the right or left button to scroll through the various settings, and press the center button again to enter your desired setting. Press the right or left button to view the setting options, then press the center button to conﬁrm your selection. Once you have made your selection, your TransDock will automatically return to the Settings Menu. Press the center button to exit the Settings Menu.

NOTE: Your TransDock will automatically exit the Settings Menu after a few

seconds of inactivity.

Preset Store

Preset Store allows you to save up to four preset stations. The default presets are 88.1, 94.9, 100.9, and 107.9.

To store your own preset stations, follow these simple steps:

1. Tune your TransDock to the station you would like to set – press the right button to tune to higher stations and the left button to tune to lower stations.

2. Press and hold the center button to enter the Settings Menu.

12 | DLO TRANSDOCK USERMANUAL

Reset Settings

Reset Settings allows you to revert back to the factory settings. To do so, scroll through the Settings Menu and press the center button on Reset Settings. Your TransDock will ask you if you are sure you would like to reset your settings. Press the center button once to accept, or press the right or left button to return to the Settings Menu.

| 15

Audio Level

Audio Level gives you the option of selecting the volume output level appropriate for your audio. Press the right button or left button to select from Low, Medium or High.

Listening Mode

Listening Mode allows you to choose between Mono and Stereo. Your TransDock defaults to Mono for optimal transmitter performance. To learn more about Listening Mode, please read Getting the Best Sound Quality on page 16.

Brightness Timer

Brightness Timer allows you to change the length of time that your TransDock’ display stays active. Scroll through to select from: Always On, 2 seconds, 5 seconds, 10 seconds, 15 seconds, 20 seconds.

Brightness Level

Brightness Level controls the brightness of the OLED display. Press the right button for higher intensity and left button for lower intensity.

Dim Level

Dim Level controls the brightness of the OLED display while your TransDock is inactive. Press the right button for higher intensity and the left button for lower intensity or completely off.

14 | DLO TRANSDOCK USERMANUAL

IMPORTANT: With the iPod connected to your TransDock, make sure that the

iPod TV Out Setting (found under iPod Video Settings) is set to either Ask or On.

Using Your TransDock with a Cassette Adapter or Your Car’s Auxiliary Input

Your TransDock can be connected to your car stereo via a cassette adapter or a mini plug (for cars with aux-in capability). To use your TransDock with a cassette adapter or car’s aux-in jack, connect the adapter or mini cable to the AVOut Port on the bottom of the TransDock Cradle. Then, connect the other end to your car as you normally would.

Using Your TransDock with Other MP3 Players or Audio Devices

Your TransDock will also transmit the music from other devices like an iPod shufﬂe, other MP3 players, portable gaming devices, portable DVD players, etc. To do so, plug your audio device into your TransDock Aux-In Port using a standard male-to-male mini cable (available separately). Your TransDock will broadcast the attached device’s audio using the FM transmitter. To get the best sound quality, adjust the volume level of your device until there is no distortion. Then, control the overall volume of your music or audio with your car stereo’s volume control.

| 17

Gettingthe Best Sound Quality

• Use IntelliTune to automatically find the optimal frequency to broadcast your iPod over your car’s FM radio. Then, tune your car’s FM radio to the

frequency displayed on your TransDock.

• Choose between Mono and Stereo in Listening Mode: Mono allows for better transmitter performance, while Stereo allows for the best sonic musical performance.

• To get the best initial performance from your TransDock, it is important that you set your iPod EQ to Off and adjust your car’s bass and treble controls to 0. Then you can experiment with adding bass and treble to your desired level.

NOTE: If static or distortion increases, switch to Mono for the best

transmitter performance possible.

Connections and Additional Features

Watching iPod Videos on a Mobile Video System

If you have a mobile video system in your car, your TransDock allows you to view your iPod video content over this system via the AV-Out Port on the bottom of the TransDock Cradle. Plug an AV mini cable (available separately) into the AV-Out Port and attach the connectors at the other end to your car’s AV inputs.

16 | DLO TRANSDOCK USERMANUAL

| 19

FrequentlyAsked Questions

Using Your Detachable 12V Power Socket

IMPORTANT: Do not insert anything other than an

18 | DLO TRANSDOCK USERMANUAL

Here you will ﬁnd the most frequently asked questions and answers about your TransDock.

What do I do if I hear static or distortion when my music is playing?

Use IntelliTune to automatically ﬁnd the optimal frequency to broadcast your iPod over your car’s FM radio. Then, tune your car’s FM radio to the frequency displayed on your TransDock.

NOTE: You may try setting the Listening Mode to Mono, which will improve the

clarity of your TransDock signal. See Getting the Best Sound Quality on page 16

What do I do if my music sounds overdriven and distorted?

Be sure that the FM station you are using is still unoccupied as you drive through different areas. FM signals can intrude on an unused frequency.

My iPod doesn't appear to be charging when it is connected to TransDock. What should I do?

Make sure your TransDock is securely positioned in your car’s power outlet. You may also check to ensure that your iPod is fully docked in the TransDock Cradle.

If I leave my TransDock plugged into my car’s power outlet, will it drain my car battery?

Probably not, but it is always a good idea to unplug anything when leaving your car for a long period of time.

| 21

Tech Specs

TUNING

Digitally Controlled Crystal Osci llator

POWER

Input Voltag e: 12VDC, 10W

Output Voltage: 5VDC, 500 mA

Replaceable Fuse: 250V , T2AH

Detachable Power Socke t: 12VDC, 500mA

TEMPERATURE

Storag e Tempe rature:

-10° to 1 20° F (-23° to 49° C)

Operat ing Temperature:

-4° to 11 3° F (-20° to 45° C)

DISPLAY

OLED Displ ay

20 | DLO TRANSDOCK USER MANUAL

COMPATIBILITY

All i Pods with Dock Connector

(excluding iPod 3rd genera tion)

FM TRANSMITTER

Modulation : FM Stereo

Defaul t Pres et Frequencies ( MHz): 88.1,

94.9, 100.9, and 107.9

Frequenc y Adjustment: 0.2 MHz per step

Frequenc y Respons e: 20Hz ~ 15kHz

Transmitter Range : up to 27 feet (8.2m)

CONNECTIONS

30-Pin iPo d Dock Co nnector

Auxiliary Input : 3.5mm stereo mini jack

Audio/Vide o Output: iPod AV out/stereo

mini jack

Power Output: 5.5mm 12V DC jack

NOTE: Your TransDock will continue to draw power from your car’s battery as

long as a device is attached.

What do I do if my iPod video is not playing over my car’s video system?

With your iPod connected to your TransDock, make sure that your iPod TV Out Setting (found under Video Settings) is set to either Ask or On. See Watching

iPod Videos on a Mobile Video System on page 16.

Can I use my TransDock with other devices?

Yes, your TransDock will broadcast the audio from an iPod shufﬂe, MP3 player, portable gaming system, portable DVD player, laptop or other audio device. See

Connections and Additional Features on page 16.

| 23

Warranty + Service

22 | DLO TRANSDOCK USER MANUAL

FCCStatement

For Customer Service please visit

http://www.dlo.com or call 1-800-233-8413.

One Year Limited Warranty

DLO warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the speciﬁcations and warnings, for a period of one year from the date of purchase. This warranty extends only to the original purchaser of the product, and is not transferable. To exercise your rights under this warranty, you must provide proof of purchase in the form of an original sales receipt that shows the product name and the date of purchase. For customer support or to obtain warranty service, please visit www.dlo.com. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. DLO liability is limited to repair or, at its sole option, replacement of the product. Incidental, special and consequential damages are disclaimed where permitted by law. This warranty gives you speciﬁc legal rights. You may also have other rights that vary from state to state.

Federal Communications Commission Interference Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Thanks for purchasing TransDock

Enjoy the Ride

DLO TransDock User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual