D Link WM112A1 User Manual

Table of Contents

D-Link DWM-112 User Manual

Chapter 1 – Product Overview

Worldwide Interoperability for Microwave Access (WiMAX) is the 802.16 networking standard that wirelessly provides high

bandwidth at long distances. D-Link DWM-112, with IEEE 802.16e-2005 standard, is a broadband wireless access (BWA) USB

adapter. With simple configurations, you can wirelessly access high-speed Internet via the WiMAX base station (BS) of your

Internet service provider (ISP) within its coverage area. Simply plug the D-Link DWM-112 Adapter into your USB, and get

started.

D-Link DWM-112 User Manual 1

Chapter 1 – Product Overview

Package Contents

Features

System Requirements

DWM-112 IEEE802.16e WiMAX USB adapter

Extension cable

Computer with:

At least one USB 2.0 port

Windows XP/Vista

WiMAX Utility

Supports IEEE802.16e-2005 Wireless MAN-OFDMA and Wireless HUMAN air interface

Visual graphic icon and signal strength for connecting and disconnecting WiMAX

Radio on/off function for when traveling on an airplane or any location that prohibits radio usage

EAP base authentication for security

D-Link DWM-112 User Manual 2

Hardware Overview

Power LED: A steady

green light indicates that

the WiMAX Adapter is

ready for use.

Chapter 2 – Overview

D-Link DWM-112 User Manual 3

Chapter 2 – Overview

Hardware Installation

Before You Start

User name/Identity

Password

NAI. (If necessary)

Frequency (If necessary)

1. Find an open USB port.

2. Insert the DWM-112 into the USB port.

Note:

Before starting installation of the device and utility, make sure that you have the following information obtained from your ISP:

Note: WiMAX WiMAX

D-Link DWM-112 User Manual 4

Chapter 3 – DWM Series WiMAX Utility

Installing the Utility

Whwn you see the Found New hardware wizard

appear,please click cancel.

The WiMAX Utility helps you to configure the settings of the WiMAX adapter. You may need to get the information from your

Internet Service Provider (ISP) in order to connect to the Internet with the WiMAX Adapter.

D-Link DWM-112 User Manual 5

Chapter 3 – DWM Series WiMAX Utility

The Autorun program on the DWM-112 will launch

and install the drivers automatically.

Double-click on the Setup.exe file and the installation

dialog will then box appear. Click Next to proceed.

D-Link DWM-112 User Manual 6