Version 1.00 | 12/11/2018
User Manual
AC1300 Wi-Fi Range Extender
DAP-1620
Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.
Manual Revisions
Hardware |
Revision |
Date |
Description |
A1 |
v1.00 |
19 August, 2015 |
Initial release hardware version A1 |
|
|
|
|
B1 |
v1.00 |
12 November, 2018 |
Updated for hardware version B1 |
|
|
|
|
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Apple®, Apple logo®, Safari®, iPhone®, iPad®, and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc.
Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.
Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2018 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation.
Power Usage
ErP Power Usage
This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. If it is not needed during certain periods of time, it can be unplugged to save energy.
Network Standby: 3.7072 watts
D-Link DAP-1620 User Manual i
Table of Contents
Table of Contents
Preface.................................................................................. |
i |
Product Overview.............................................................. |
1 |
Package Contents......................................................................... |
1 |
System Requirements.................................................................. |
2 |
Introduction.................................................................................... |
3 |
Features.................................................................................... |
3 |
What is a Wireless Extender?............................................. |
4 |
Hardware Overview...................................................................... |
5 |
Front........................................................................................... |
5 |
Status/WPS LED Indicator.................................................. |
6 |
Bottom...................................................................................... |
7 |
Back............................................................................................ |
8 |
Installation.......................................................................... |
9 |
Wireless Installation Considerations...................................... |
9 |
Assessing Uplink Signal Strength.......................................... |
10 |
Hardware Setup........................................................................... |
11 |
Getting Started................................................................. |
12 |
WPS-PBC Configuration............................................................ |
13 |
D-Link Wi-Fi App.......................................................................... |
14 |
Wireless Setup Wizard............................................................... |
16 |
Wired Setup Wizard.................................................................... |
23 |
Configuration................................................................... |
30 |
Home............................................................................................... |
30 |
Home - Connected to a Wi-Fi Mesh Router....................... |
33 |
Settings........................................................................................... |
34 |
Extender Settings................................................................ |
34 |
Existing Network............................................................. |
35 |
Smart Connect................................................................. |
36 |
Network Settings................................................................. |
38 |
Management................................................................................ |
40 |
Time.......................................................................................... |
40 |
Schedule................................................................................. |
41 |
Admin...................................................................................... |
42 |
System..................................................................................... |
43 |
Upgrade.................................................................................. |
44 |
Statistics.................................................................................. |
45 |
Connecting Wireless Clients to the Extended Network.46 |
|
WPS Button................................................................................... |
46 |
Windows® 8 - WPA/WPA2......................................................... |
47 |
Windows® 7 - WPA/WPA2......................................................... |
49 |
Windows Vista® - WPA/WPA2.................................................. |
52 |
Troubleshooting............................................................... |
54 |
Wireless Basics.................................................................. |
56 |
Tips................................................................................................... |
57 |
Technical Specifications................................................... |
58 |
GPL Code Statement........................................................ |
59 |
Regulatory Statements.................................................... |
74 |
D-Link DAP-1620 User Manual |
ii |
Section 1 - Product Overview
Product Overview
Package Contents
DAP-1620 AC1300 Wi-Fi Range Extender |
|
|
|
|
Simple Setup Guide |
|
|
|
|
||
|
|
|
|
||
|
|
|
|
||
|
|
|
|
||
|
|
|
|
|
|
QIC Quick Install Card
If any of the above items are missing, please contact your reseller.
D-Link DAP-1620 User Manual |
1 |
Section 1 - Product Overview
System Requirements
Network Requirements |
• A wireless router with an active Internet connection. |
• IEEE 802.11ac, 802.11n, 802.11g, 802.11b, or 802.11a |
|
|
wireless clients/devices |
|
|
|
A Computer or Mobile Device with the following: |
|
•Windows®,Apple®MacOS®,orLinux-basedoperatingsystem |
|
•Wireless adapter orWi-Fi functionality |
Web-based Configuration |
• An Apple® iPhone®, iPad®, or Android™ mobile device |
|
|
Utility Requirements |
Browser Requirements: |
|
• Internet Explorer® 9 or later |
|
• Firefox® 20.0 or later |
|
• Safari® 5.1 or later |
|
• Google Chrome™ 25.0 or later |
|
|
D-Link DAP-1620 User Manual |
2 |
Section 1 - Product Overview
Introduction
Features
High-speedWireless PerformanceWithWireless 802.11acTechnology
Thanks to the latest wireless AC technology, the DAP-1620 provides a wireless connection at up to 1300 Mbps* with other 802.11ac wireless devices. This feature lets you participate in real-time activities online, such as video streaming, online gaming, and real-time audio with smooth performance.
Compatibility
The DAP-1620 is fully compatible with the latest 802.11ac standard, but is also backwards compatible with IEEE 802.11n/g/b/a wireless devices, so you can use your existing devices without sacrificing performance.
Compact, Convenient Design
The DAP-1620 is a compact device that is ideal for use at home or a small office, as it does not take up much space and is ready to use by simply plugging it in. The bright Signal Indicator LED makes finding a suitable location a cinch. Its diminutive wall-plug design easily saves you the hassle of dealing with a power cord.
LatestWireless Network Security and Encryption
The DAP-1620 supports wireless security features to prevent unauthorized access from the wireless network. Support for WPA/WPA2 standards ensure that you’ll be able to use the best possible encryption methods with your compatible wireless devices.
Extend and CustomizeYour High-speedWireless AC Network withWi-Fi Mesh
D-Link’s Wi-Fi Mesh is a scalable solution that allows you to easily increase the coverage of your wireless AC network. Setup is effortless; configuration of multiple DAP-1620’s can be done in minutes as settings can be passed on to other access points once the first is configured.
Easy to Set Up, Easy to Use
Setting up the AC1300 Wi-Fi Range Extender is simple. You can use the supported D-Link Wi-Fi app on your iPhone, iPad, or Android device to utilize the built in set up wizard. The DAP-1620 can also receive automatic over-the-air firmware updates, which ensures the best protection and the latest features for your device.
* Maximum wireless signal rate derived from standard IEEE specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead may lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
D-Link DAP-1620 User Manual |
3 |
Section 1 - Product Overview
What is a Wireless Extender?
The DAP-1620 acts as a repeater to extend the range of an existing wireless network to provide a better signal for parts of your home or office that may have poor or no reception. Your existing wireless signal will be re-broadcast by the DAP-1620, allowing you to reach the farthest corners of your home or office. The extended network can simply use the same network credentials as the existing network, or you can specify a different network name and password, giving you the flexibility to control network access. You may also use the DAP-1620 as a wireless access point by connecting an Ethernet cable.
ExtendYourWireless Network usingWi-Fi
Computer
Internet |
Router |
DAP-1620 |
Wireless Devices |
|
|
Extender |
|
Create aWireless Network using Ethernet
Computer
Internet |
Router |
DAP-1620 |
Wireless Devices |
|
|
Extender |
|
D-Link DAP-1620 User Manual |
4 |
Section 1 - Product Overview
Hardware Overview
Front
1
2
3
1 |
Status/WPS LED |
This LED indicates the current status of the DAP-1620, as detailed on the next page. |
|
|
|
|
|
2 |
WPS Button |
Press to establish a connection with another WPS compatible device. See page “WPS Button” on page 46 |
|
for more information. |
|||
|
|
||
|
|
|
|
3 |
Signal Indicator |
The more lit green bars on the Signal Indicator LED, the better the wireless signal to the host network. A |
|
LED |
single solid amber LED indcates a weak Wi-Fi signal. |
||
|
|||
|
|
|
D-Link DAP-1620 User Manual |
5 |
Section 1 - Product Overview
Status/WPS LED Indicator
Status/WPS LED Indicator
LED Indicator |
Color |
Status |
Description |
|
|
|
|
|
Green |
Solid |
The DAP-1620 is receiving power and connected to a host network. |
|
|
|
|
|
Blinking |
WPS mode is active. |
|
|
|
||
|
|
|
|
Power/Status |
Red |
Solid |
The DAP-1620 is booting or an error has occurred. |
|
|
|
|
|
Amber |
Blinking |
The DAP-1620 is not connected to a host network. |
|
|
|
|
|
None |
Off |
Device is not receiving power. Check the power outlet. |
|
|
|
|
D-Link DAP-1620 User Manual |
6 |
Section 1 - Product Overview
Bottom
1 2
1 |
LAN |
Connect an Ethernet cable if you are adding wireless to wired network. |
|
|
|
|
|
2 |
Reset Button |
Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-1620 for 10 seconds |
|
to restore the factory default settings. |
|||
|
|
D-Link DAP-1620 User Manual |
7 |
Section 2 - Installation
Back
You may locate the Wi-Fi name (SSID) and password for your DAP-1620. This information is printed on the specification sticker on the back of the device. You will need this information to connect your computer or mobile device to the default network (SSID) of your DAP-1620. This information is also provided on the Quick Installation Card.
D-Link DAP-1620 User Manual |
8 |
Section 2 - Installation
Installation
Wireless Installation Considerations
The DAP-1620 lets you extend your existing wireless network’s coverage as long as it is within range of the uplink network. Keep in mind that the DAP-1620’s extension network’s range may be limited by the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through.Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1.Keep the number of walls and ceilings between the D-Link extender and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.
2.Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3.Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position extenders, access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4.Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.
5.If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.
D-Link DAP-1620 User Manual |
9 |
Section 2 - Installation
Assessing Uplink Signal Strength
The Status/WPS LED will turn solid green when the DAP-1620 has connected successfully to a wireless network and is extending that network. If the Signal Indicator LED has a single amber bar after the connection process has finished, the DAP-1620 has established a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal. To improve the connection quality, the DAP-1620 should be relocated closer to the source wireless router. Using the 5 GHz extension network is recommended in order to achieve the fastest wireless speeds.
Poor Ok Good Best
D-Link DAP-1620 User Manual |
10 |
Section 2 - Installation
Hardware Setup
Plug in the DAP-1620 to a power outlet. Verify that the power LED is blinking amber before continuing with configuration.
OUTLET
D-Link DAP-1620 User Manual |
11 |
Section 3 - Configuration
Getting Started
There are several configuration tools you can use to set up your DAP-1620.
•WPS PBC - To easily extend an existing wireless network refer to “WPS-PBC Configuration” on page 13 for setup instructions.
•D-Link Wi-Fi App - Use your Android device, iPhone or iPad to configure your extender. Refer to “D-Link Wi-Fi App” on page 14 for setup instructions.
•Web-based Wireless Setup Wizard - This wizard will launch when you log into the extender’s web configuration utility for the first time. Refer to “Wireless Setup Wizard” on page 16 for setup instructions.
•Web-based Wired Setup Wizard - This wizard will launch when you log into the extender’s web configuration utility for the first time whilst connected to your router using an ethernet cable. Refer to “Wired Setup Wizard” on page 23 for setup instructions.
D-Link DAP-1620 User Manual |
12 |
Section 3 - Configuration
WPS-PBC Configuration
To connect to a wireless router or access point and extend the Wi-Fi network in your home, first make sure the source router or Access Point features a WPS Button or has a virtual WPS Button.
Step 1 - Initiate WPS Mode
While the Status/WPS LED is blinking amber. Push the WPS button on the source wireless router or AP, and then push the WPS button on the DAP-1620. The Status/WPS LED will start to flash green. Please allow up to two minutes for the process to finish. The Status/WPS LED will turn solid green when the DAP-1620
has connected successfully to the source wireless router or access point.
Step 2 - Assess Result
If the Signal Indicator LED has a single amber bar after the connection process has finished, the DAP-1620 has established a poor quality connection. To improve the connection quality, the DAP-1620 should be relocated to a wall outlet closer
to the source wireless router or access point. The more lit bars on the Signal Indicator LED, the better the wireless signal.
Step 3 - Connecting Devices to the DAP-1620
The DAP-1620 is now ready to share the extended Wi-Fi network with your PCs and mobile devices. You may use the WPS method to connect devices to the extension networks created by the DAP-1620 using the following network names (SSID). The password(s) will be the same as the wireless network you are extending.
Poor |
Ok |
Good |
Best |
Connection |
Connection |
Connection |
Connection |
D-Link DAP-1620 User Manual |
13 |
Section 2 - Installation
D-Link Wi-Fi App
The DAP-1620 can be set up from your iPhone, iPad, or Android smartphone or tablet device using the D-Link Wi-Fi app.
Note: The screenshots may be different depending on your mobile device’s OS version.
Step 1
Search for the free D-LinkWi-Fi App on the Apple App Store or Google Play and install. You can also scan the QR code on the right, which will take you to the respective D-Link Wi-Fi app store page directly.
Step 2
Launch the D-Link Wi-Fi App from the Home screen of your device.
D-Link Wi-Fi
Step 3
Click on the Install New Device button at the middle of the screen (or click on the Menu button on the top left corner of the app to do the same).
D-Link DAP-1620 User Manual |
14 |
Section 3 - Configuration
Step 4
Click Yes if you have the setup QR code with you to scan the QR code and proceed to step 6. If not, click No and proceed to step 5.
Step 5
Slide the product options to Router and select DAP-1620 from the list of available devices. Click Next to continue.
Step 6
You will now be guided through a step-by-step process for setting up your device. Simply follow the on-screen instructions to complete the installation and DAP-1620 configuration process.
D-Link DAP-1620 User Manual |
15 |
Section 3 - Configuration
Wireless Setup Wizard
The setup wizard is designed to guide you through a step-by-step process to configure your new DAP-1620
AC1300 Wi-Fi Range Extender to extend your wireless network and connect to the Internet via a wireless setup process. To set your DAP-1620 using an ethernet cable, please refer to“Wired Setup Wizard” on page 23.
To access the setup utility for the DAP-1620 AC1300 Wi-Fi Range Extender on your PC, first connect to the DAP-1620 wirelessly using the Wi-Fi name (SSID) and password located on the back of your DAP-1620. Then open a web browser and enter http://dlinkap.local./ in your browser’s URL field. You may also enter the IP address* of the DAP-1620.
*The default IP address is 192.168.0.50. Once your DAP-1620 connects to the host network, it will be assigned a new IP address based on your network’s DHCP settings. You will need to log in to your router to see what IP address is assigned to your DAP-1620. For multiple DAP-1620s, go to http://dlinkapxxxx.local. as shown on the included Quick Installation Card, with “xxxx” being the last four digits of the DAP-1620’s MAC address.
If this is your first time logging in to the extender and no connection has been established, the setup wizard will automatically appear. If the setup process was not previously completed, then log in to the interface by leaving the password field blank.
D-Link DAP-1620 User Manual |
16 |
Section 3 - Configuration
Agree to the Terms of Use and Privacy Policy to continue.
This wizard will guide you through configuring your new DAP-1620 by wireless means.
Click Next to begin.
D-Link DAP-1620 User Manual |
17 |
Section 3 - Configuration
Please wait while your DAP-1620 scans for available Wi-Fi networks.
The DAP-1620 will scan for available wireless networks and display a list of results. You may choose one of the following options to proceed:
•If the wireless network you wish to extend was detected by the scan, click on the network to select it. The extender will automatically forward you to the next step.
•If the network you would like to extend was not detected by the scan, click the Manual button.
Note: If the wireless network you would like to extend was not detected by the scan, your DAP-1620 might be out of range and you may need to reposition the extender closer to the host network device.
YourRouter
D-Link DAP-1620 User Manual |
18 |
Section 3 - Configuration
If the wireless network you wish to extend was detected by the scan, enter the password to your router now.
Click Next to continue on to configure your extension network settings, or click Back to return to the previous step.
YourRouter
If you chose Manual , enter the Wireless Network Name and Password of the existing Wi-Fi network you wish to connect to.
Click Next to continue on to configure your extension network settings, or click Back to return to the previous step.
D-Link DAP-1620 User Manual |
19 |
Section 3 - Configuration
In order to secure the extender’s web configuration utility, please enter an admin password. You will be prompted for this password each time you want to use the extender’s web configuration utility.
Click Next to continue.
Select your time zone from the drop-down menu.
Click Next to continue.
Keeping your DAP-1620 firmware up to date provides you with the latest protection and new features over the air. Choose whether to keep your device up to date automatically or to manage the device updates by yourself.
Click Next to continue.
D-Link DAP-1620 User Manual |
20 |
Section 3 - Configuration
At the end of the wizard, you will be presented with a final summary of your settings. It is recommended that you record this information for future reference.
Click Finish to close the wizard.
*Wireless network names and passwords are shown for example only.
Your changes will be saved and the extender will reboot.
Devices may be connected to the new wireless extension network(s) once the extender successfully reboots.
D-Link DAP-1620 User Manual |
21 |
Section 3 - Configuration
Click OK to exit the Setup Wizard. You will be redirected to the log in page. You can now place the DAP-1620 in a place where you require Internet access.
D-Link DAP-1620 User Manual |
22 |
Section 3 - Configuration
Wired Setup Wizard
The setup wizard is designed to guide you through a step-by-step process to configure your new DAP-1620
AC1300 Wi-Fi Range Extender to extend your wireless network and connect to the Internet via a wired setup process. To set your DAP-1620 wirelessly, please refer to“Wireless Setup Wizard” on page 16
To access the setup utility for the DAP-1620 AC1300 Wi-Fi Range Extender on your PC, connect an Ethernet cable from a LAN port in your router to LAN port located on the bottom of the DAP-1620. Then open a web browser and enter http:// dlinkap.local./ in your browser’s URL field. You may also enter the IP address* of the DAP-1620.
*The default IP address is 192.168.0.50. Once your DAP-1620 connects to the host network, it will be assigned a new IP address based on your network’s DHCP settings. You will need to log in to your router to see what IP address is assigned to your DAP-1620. For multiple DAP-1620s, go to http://dlinkapxxxx.local. as shown on the included Wi-Fi Configuration Card, with “xxxx” being the last four digits of the DAP-1620’s MAC address.
Agree to the Terms of Use and Privacy Policy to continue.
D-Link DAP-1620 User Manual |
23 |
Section 3 - Configuration
This wizard will guide you through configuring your new DAP-1620 by wired means.
Click Next to begin.
Enter your chosen name (SSID) and password for your extended Wi-Fi network. This is the Wi-Fi network you will connect your wireless devices to.
Click Next to continue.
*Wireless network names and passwords are shown for example only.
D-Link DAP-1620 User Manual |
24 |
Section 3 - Configuration
In order to secure the extender’s web configuration utility, please enter an admin password. You will be prompted for this password each time you want to use the extender’s web configuration utility.
Click Next to continue.
Select your time zone from the drop-down menu.
Click Next to continue.
Keeping your DAP-1620 firmware up to date provides you with the latest protection and new features over the air. Choose whether to keep your device up to date automatically or to manage the device updates by yourself.
Click Next to continue.
D-Link DAP-1620 User Manual |
25 |
Section 3 - Configuration
At the end of the wizard, you will be presented with a final summary of your settings. It is recommended that you record this information for future reference.
Click Finish to close the wizard.
*Wireless network names and passwords are shown for example only.
Your changes will be saved and the extender will reboot.
Devices may be connected to the new wireless extension network(s) once the extender successfully reboots.
D-Link DAP-1620 User Manual |
26 |
Section 3 - Configuration
Click OK to exit the Setup Wizard. You will be redirected to log in to the configuration utility again.
Enter your previously chosen Admin Password to log in to the configuration utility.
D-Link DAP-1620 User Manual |
27 |
Loading...