DKT Comega IPLoC Quick Start Manual

IPLoC - Quick Start Guide

IPLoC - Quick Start Guide

SiS 03

The following items should be found in your
package:

1 pcs

IPLoC

push-on

module

1 pcs

Power supply

with DC-con-

nector

Plug in IPLoC to the existing ADSL / Broadband
router with an Ethernet cable in LAN socket.

Install the IPLoC on the existing TV socket.
(if you have a TV cord in the socket, remove it
and put it in the IPLoC instead).

if you have a TV cord in the socket, remove it and
put it in the IPLoC instead

When the second device is connected, it will be

congured automatically. Could take up to 3 min.

For the function of the device, please check the
LED indicator lights on the side of IPLoC

Name: Status: Indication:

Power

MoCA

LAN

MoCA

LAN

Green Power on

Off Power off

Green Link

Off No link

Green Ethernet connected

Blinking Activity

Plug the supplied mains adapter to IPLoC

To connect an additional device, open an second
unit and connect the device to the TV socket in
which you want an Internet connection.

IPLoC push-on module has a Reset/Default func­tion.

When pressing the reset button,
the device make a new search for
other units.

No function

It may take up to 3 minutes for devices to nd

each other and establish link after a reset.

IPLoC - example

Gateway, delivery point

TV-signal

Internet

Router

Smart-TV

Computer TV

TV

Internet

Connect the network cable to the device.

For complete information, see installation manual

IPLoC - Quick Start Guide 2017-03-02. Ver. 1_Rev_2 Specications are subject to change without notice. DKT is not responsible for any typographical errors or wrong.

Tlf [phone]
Fax [phone]
E-mail [e-mail]
Web www.dktcomega.com

DKTCOMEGA

Fanoevej 6

DK-4060 Kirke Saaby