D&K Masterpiece 550, Masterpiece 250 Owner's Manual

CONTENTS

Press Features and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

mportant Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

I

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Identification of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installation and Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Program Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Procedures For Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Processing Oversize Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Pressure Adjustment Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Periodic Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

PRESS FEATURES AND SPECIFICATIONS

• Fast Operation: Superior heating system quickly brings

the platen to uniform temperature ensuring 100%

bonding.

• Extended Temperature Range: Thermostat control

adjusts from 100º F to 300º F (38 º –150º C) to cover a

wide range of operating temperatures.

Programmed Heating Cycles:Temperature and time may

•

be set by stored programs in control unit.

emperature Readout:

T

•

on LED display on top of unit.

Platen temperatur

e is indicated

• Extra-Wide Opening: Opens a full 9” (23cm) for 550

and 10” (25cm) for 250 to provide easy access to

platen surface.

• Easy Pressure Adjustment: Pressure adjusts and locks

in seconds to accept materials up to 1" (25mm) thick.

• Non-Stick Surface: Platen surface is specially coated to

help keep adhesives fr

• Free-Floating Platen: Seats evenly on the work without

shifting to pr

face.

sur

ovide uniform pressure acr

om sticking.

oss the entir

e

• Cycle Time Readout: Remaining time in the cycle is

displayed.

• Oversize Capacity: Design allows processing of materials

larger than the press platen by sliding the work side-to-

side or out the front or back of the press.

• Rugged Construction: Steel cantilevers increase

e on work

durability and allow maximum pr

within the pr

adds ruggedness.

ess. Metal top and base constr

essur

uction

2