DJI Zenmuse X5S Users Manual

ZENMUSE X5S
User Manual
2018.04
V1.4
Searching for Keywords
Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe Acrobat
Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a
search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that
section.
Printing this Document
This document supports high resolution printing.

Read Before the First Flight

Legends

Warning Important Hints and Tips Reference

Using this manual

Read the following documents before using the ZENMUSE™ X5S
1. Zenmuse X5S Quick Start Guide
2. Zenmuse X5S User Manual
We recommend reading the Zenmuse X5S Quick Start Guide, especially its Disclaimer and Safety
sections, to get familiar with all parts of the Zenmuse X5S. Refer to this Zenmuse User Manual for
detailed information.

Getting more information

Visit the following webpage for more information about the Zenmuse X5S.
http://www.dji.com/zenmuse-x5s/info#video
2
©
Contents
Read Before the First Flight
Legends
Using this manual
Getting more information
Product Prole
Introduction
In the Box
Overview
Getting Started
Read the information below before setting up your Zenmuse X5S
Supported Devices
Supported Lenses for the DJI Inspire 2
Required Lens Accessories
Installing the Camera Lens
Mounting the Zenmuse X5S to the aircraft
Mounting the Zenmuse X5S to the Inspire 2
Mechanical Range
Using the Remote Controller
DJI GO 4 App
Downloading
Launching DJI GO 4 app
Camera Operation
Touch Interface
Basic Shooting
Taking Photos
Recording
Advanced Settings
Exposure Mode
Photo Styles
White Balance
List of Settings
Managing your Photos and Videos
Playback
Update Firmware
Appendix
Specications
2
2
2
2
4
4
4
5
5
5
5
5
6
7
8
8
9
9
10
10
10
10
10
11
11
11
11
11
12
12
13
14
14
15
16
16
©
3
Product Prole

Introduction

Featuring M4/3 CMOS sensor, the Zenmuse X5S supports up to 20.80 MP still photo capture.
It is capable of capturing 5.2K 30fps CinemaDNG video and Apple ProRes Video as well as 4K
60fps using H.264. The Zenmuse X5S is built using the M4/3 interchangeable lens standard. A
variety of shooting modes, including single shooting, burst shooting and interval shooting, provide
more options of capture. Burst and AEB is available, with up to 14 stills.
When the DJI™ CINESSD™ is in use, the Zenmuse X5S is able to record lossless videos with a
bitrate of 5.2 Gbps in the CinemaDNG format or capture DNG stills at 20fps continuously.
The optional DJI kit lens is 15mm f/1.7 ASPH (equivalent to 30mm in 35mm format) with a
72-degrees eld of view. Supported Lens details refer to Page 5 of Supported Lenses for the
Inspire 2.
When mounted on the Inspire 2, the 3-axis gimbal provides a stable platform for the camera to
get clear shots even during rapid maneuvering. The gimbal tilts the camera across a -130° to
+40° pitch angle and pans ± 320° in both directions. Live HD video from the camera is streamed
to the DJI GO™ 4 app.

In the Box

Check that all of the following items are in your package. If any item is missing, please contact
DJI or your local dealer.
Zenmuse X5S ×1 DJI MFT 15mm f/1.7 ASPH
Lens* ×1
Camera Balancing
Ring*×1(BR-Φ46-10)
*The Zenmuse X5S lens kit includes an original lens (with lens cap), lens hood, camera body cap, lens rear cap
and camera balancing ring, and the original lens (with lens cap), lens hood and camera balancing ring have
been mounted on the Zenmuse X5S before delivery; Accessories for other supported lens can be purchased
separately on the ofcial DJI store.
4
©
Camera Body Cap×1 Lens Rear Cap* ×1 Carrying Case ×1
Lens Hood* ×1

Overview

Zenmuse X5S
Pan Motor
ZENMUSE X5S User Manual
DJI Gimbal Connector2.0
Lens lock
Lens Mount Index
Tilt Motor
Roll Motor
Lens Mount
Lens Release Button
DJI MFT 15mm f/1.7 ASPH Lens
Focusing Ring
AF/MF Switch
Lens Mount Index
Aperture Ring
Lens Hood Thread
46mm Lens Filter Thread
Dust Cover

Getting Started

Read the information below before setting up your Zenmuse X5S

Supported Devices

The Zenmuse X5S can be attached to the following device, and will be compatible with other DJI
devices in the future.
DJI Inspire 2

Supported Lenses for the DJI Inspire 2

The Zenmuse X5S currently supports the following lenses, and will support additional lenses in
the future.
DJI MFT 15mm/1.7 ASPH
©
5
ZENMUSE X5S User Manual
Panasonic Lumix 15mm/1.7 Panasonic Lumix G X Vario PZ 14-42mm f/3.5-5.6 Power O.I.S
Olympus M.Zuiko 12mm/2.0 Olympus M.Zuiko 17mm/1.8 Olympus M.Zuiko 25mm/1.8 Olympus M.Zuiko 45mm/1.8 Olympus M.Zuiko 9-18mm/4.0-5.6
For sharp and clear video, the shutter speed should be no shorter than 1/500s when
using a focal length of 15mm; and 1/600s when using a focal length of 25mm.

Required Lens Accessories

The performance of the gimbal is aected by the weight of the camera. The following table shows the recommended DJI Balancing Ring, Balancing Cap, lter and lens hood required for each lens
model. Details are shown as below.
Lens
DJI MFT 15mm/1.7 ASPH BR-Φ46-10 Not Required 46 mm 10 g Required
Panasonic Lumix 15mm/1.7 BR-Φ46-10 Not Required 46 mm 10 g Required
Panasonic Lumix G X Vario
PZ 14-42mm f/3.5-5.6 Power O.I.S
Olympus M.Zuiko 12mm/2.0 BR-Φ46-10 Not Required 46 mm 10 g Not Required
Olympus M.Zuiko 17mm/1.8 BR-Φ46-10 Not Required 46 mm 10 g Not Required
Olympus M.Zuiko 25mm/1.8 BR-Φ46-10 Not Required 46 mm 10 g Not Required
Olympus M.Zuiko 45mm/1.8 BR-Φ37-8 BR-Φ37-6 37 mm 6 g Not Required
DJI Balancing Ring Filter
A B Thread Size Weight
B R - Φ 3 7 - 1 7 BR-Φ37-6 37 mm 6 g Not Required
Lens Hood
Lens
Olympus M.Zuiko 9-18mm/4.0-5.6
The thread size and weight of the Balancing Ring/ Balancing Cap are included in the model number, i.e.:
BR-Φ46-10 has a thread size of 46 mm and a weight of 10 g.
Choose the appropriate balancing ring/balancing cap based on the lens required.
Ensure to attach the balancing ring (A)/balancing cap and the balancing ring(B)
simultaneously, as illustrated when using the Panasonic Lumix G X Vario PZ 14-42mm
f/3.5-5.6 Power O.I.S, Olympus M.Zuiko 45mm/1.8 and Olympus M.Zuiko 9-18mm/4.0-
5.6. Attach the lter when the balancing ring (B) is not in use.
Two balancing rings, as illustrated, are required when using the Olympus M.Zuiko
17mm/1.8. When using a lter, remove a balancing ring.
The balancing cap should be attached to the rear of the lens when using the Olympus
M.Zuiko 9-18mm/4.0-5.6. Detach the original rear cap of the lens before attaching the
required balancing cap.
Digital zoom is not supported in the M. Zuiko Digital ED 9-18mm F4-5.6 lens.
6
©
DJI Balancing
Cap
BC-Φ60-78 BR-Φ52-10 52 mm 10 g Not Required
DJI Balancing
Ring B
Filter
Thread Size Weight
Lens Hood
Loading...
+ 13 hidden pages