Zenmuse H30 Series Known Issue List
Date:
2024.07.18
Zenmuse H30 series Firmware:
v10.01.0703
M350 RTK Aircraft Firmware:
v10.01. 0009
M300 RTK Aircraft Firmware:
v60.01.0003
Remote Controller Firmware:
v05.02.1106
DJI Pilot 2 App:
v
10.1.0.30
No.
Issue Description
Workaround Solution
1
When shooting via Smart Capture mode in SBS
view, the icon of the images shows as Single
Shot mode in Playback.
The issue only persists when using Smart Capture
mode in SBS view and will not affect the shooting
effect. Users can shoot in Single view when using
Smart Capture mode.
2
When Pre-Rec mode is enabled, the night scene
level can be automatically enabled but cannot
be switched if Night Scene mode is set to Auto.
To avoid frequently resetting the pre-recording of
the video due to the night scene level adjustment, the
camera cannot switch the night scene level
automatically when Pre-Rec mode is enabled. It is
recommended to manually switch the night scene
level according to the ambient brightness.
* Make sure to update the firmware version for the aircraft, the remote controller, and the H30 series. Otherwise,
they will not be compatible with each other.
Known Issues in v10.01.0703
https://enterprise.dji.com/zenmuse-h30-series
Copyright © 2024 DJI All Rights Reserved
1
Zenmuse H30 Series Known Issue List
Date:
2024.05.16
Zenmuse H30 series Firmware:
v01.00.00.01
M350 RTK Aircraft Firmware:
v10.00.06.02
M300 RTK Aircraft Firmware:
v60.00.01.07
Remote Controller Firmware:
v03.02.09.08
DJI Pilot 2 App:
v10.0.6.12
No.
Issue Description
Workaround Solution
1
When shooting via Smart Capture mode in SBS
view, the icon of the images shows as Single
Shot mode in Playback.
The issue only persists when using Smart Capture
mode in SBS view and will not affect the shooting
effect. Users can shoot in Single view when using
Smart Capture mode.
2
When restarting the H30 series with Pre-Rec
mode enabled, the recording video file displays
a different shooting time from the actual by 8 h.
Turn Pre-Rec mode off and on again after restarting
the payload, and the displayed shooting time of the
file will be consistent with the actual time.
3
There may be deviation between some photos
taken by the zoom camera and the selected area
in High-Res Grid Photo mode.
The deviation may exist in photos taken where the
gimbal pitch angle exceeded 30°. The issue will be
solved in later versions.
4
If the zoom ratio is set to more than 200x for
the waypoint action, the zoom camera cannot
reach the preset zoom ratio during the flight
task.
The waypoint action can be set to Hover if the zoom
ratio needs to exceed 200x during the flight task, and
then the user can adjust the camera zoom manually
when the aircraft is hovering. This issue will be
fixed in future versions.
5
When Pre-Rec mode is enabled, Enhanced
Noise Reduction cannot be automatically
enabled if Night Scene mode is set to Auto.
Enable Night Scene mode manually when Pre-Rec
mode is enabled.
* Make sure to update the firmware version for the aircraft, the remote controller, and the H30 series. Otherwise,
they will not be compatible with each other.
Known Issues in v01.00.0001
Added Known Issues:
https://enterprise.dji.com/zenmuse-h30-series
Copyright © 2024 DJI All Rights Reserved
2
Loading...