BOSS LPS
Low Pressure Systems
Products designed specifically for the oil and gas industry
One-Piece 8" Dixon Frac Fittings
Application:
• used in the transfer of water, chemicals and sand slurry at hydraulic fracturing sites
Features:
• one-piece stem design eliminates leak path as experienced with two-piece threaded systems
• interchangeable with current ttings; phase them into your operation
• durable and safe with reliable hose retention when crimped as specied
• 150 PSI (10 BAR) working pressure at 70°F (21°C)
• 3:1 safety factor (SF)
Materials:
• forged nuts meet AISI standards
• machined iron stems meet ASTM standards; zinc plated
• male NPT style stems are machined from schedule 40 steel pipe
Frac Fittings
Description Fig. 100 Part # Fig. 206 Part #
complete assembly (male, female, nut, O-ring) HUMF100800CS HUMF206800CS
female frac tting HUFALL800CS HUFALL800CS
male frac tting (includes nut and O-ring) HUM100800CS HUM206800CS
8" male NPT tting STC80CS STC80CS
wing nut (forged) HU100800N HU206800N
O-ring (Buna-N) --- O447BU
split nut (forged) when replacing one-piece nut HU100800RN HU200800RN
• refer to the other side for tting and ferrule dimensions
wing nutmale ttingfemale tting male NPT tting
10.866" -3
FEMALE ACME
THREAD
O-RING
2 7/16"
9 3/16"
5"
One-Piece 8" Dixon Frac Fittings
15 1/32"
8 1/16"
10.866" - 3
MALE ACME
THREAD
8" Short Frac Ferrules
8 1/2"
5"
8 1/16"
FERRULE OD
MADE IN USA
PART NUMBER
DATE OF MANUFACTURE
Part #
CFS800-1CS
Hose OD
From To
8-29/64"
8-36/64"
Ferrule OD Ferrule ID Wall Thickness
8.867" 8.625" .120" 4.25"
Ferrule Overall
Length
CFS800-2CS 8-37/64" 8-44/64" 8.992" 8.750" .120" 4.25"
CFS800-3CS 8-45/64" 8-52/64" 9.117" 8.875" .120" 4.25"
CFS800-4CS 8-53/64" 8-60/64" 9.242" 9.000" .120" 4.25"
CFS800-5CS 8-61/64" 9-4/64" 9.367" 9.125" .120" 4.25"
CFS800-6CS 9-5/64" 9-12/64" 9.492" 9.250" .120" 4.25"
CFS800-7CS 9-13/64" 9-20/64" 9.617" 9.375" .120" 4.25"
CFS800-8CS 9-21/64" 9-28/64" 9.742" 9.500" .120" 4.25"
Safety
Dixon's couplings and retention devices are designed to work safely for their intended use. The selection of the proper hose, coupling and retention device, and
the proper application of the coupling to the hose are of utmost importance.
Users must consider the size, temperature, application, media, pressure and hose and coupling manufacturer's recommendations when selecting the proper hose
assembly components. Dixon recommends that all hose assemblies be tested in accordance with the Association for Rubber Products Manufacturer's (ARPM) recommendations and be inspected regularly (before each use) to ensure that they are not damaged or have become loose. Visit ARPMINC.com for more information.
Where safety devices are integral to the coupling, they must be working and utilized. The use of supplementary safety devices such as safety clips or safety
cables are recommended.
If any problem is detected, couplings must be removed from service immediately. Dixon is available to consult, train and recommend the proper selection
and application of all ttings we sell. We strongly recommend that distributors and end users make use of Dixon's Testing and Recommendation Services. Call
877.963.4966 or click dixonvalve.com to learn more.
scan to visit our website
connect with us on
Dixon
ph 877.963.4966
fx 800.283.4966
sales@dixonvalve.com
dixonvalve.com
© 2014 DV Printed in the USA 8FRAC_314_1P