Dixon FloTech FT201-12, FloTech FT201, FloTech FT201-18, FloTech FT202, FloTech FT202-12 Maintenance & Operating Instructions

5204 ...................... fixed handle, with sight glass

5204C .................... detachable handle, with sight glass

5204NG ................. fixed handle, no sight glass

5204NGC .............. detachable handle, no sight glass

5204T .................... fixed handle, with sight glass, Teflon seals, SS spring

5204TC ................. detachable handle, with sight glass, Teflon seals, SS spring

5204NGT .............. fixed handle, no sight glass, Teflon seals, SS spring

5204NGTC ............ detachable handle, no sight glass, Teflon seals, SS spring

5204B .................... fixed handle, sight glass, Bayloy nose ring

5204BC ................. detachable handle, with sight glass, Bayloy nose ring

5204BNG .............. fixed handle, no sight glass, Bayloy nose ring

5204BNGC ........... detachable handle, no sight glass, Bayloy nose ring

5204SNG……… …fixed handle, no sight glass, stainless steel main spring
5204NGV…………fixed handle, no sight glass, Poppet O-ring, for B100

5204NGCV ........... detachable handle, no sight glass, Poppet O-ring, for B100

5204BNGV......... fixed handle, no sight glass, Bayloy nose ring, Poppet O-ring, for B100

5204BNGCV ...... detachable handle, no sight glass, Bayloy nose ring, Poppet O-ring, for B100

5204SNGV …… …fixed handle, no sight glass, stainless steel main spring, Poppet O-ring, for B100

5204P .................... fixed handle, with sight glass, drain plug

Maintenance & Operating Instructions

For

FloTech

Red & Black 2 Wire Retain / Overfill Compatible Optic Sensors

Part Numbers

FT201
FT201-12
FT201-18
FT202
FT202-12
FT202-18
FT206

USA:

Dixon Bayco USA

Chestertown, Maryland
Phone: [phone]
Fax: [phone]
Toll Free: 800-355-1991
E-mail: [e-mail]

www.dixonbayco.com

Canada:

Dixon Group Canada Limited

Innisfil (Barrie), Ontario
Phone: [phone]
Fax: [phone]
Toll Free: 877-963-4966
E-mail: [e-mail]

www.dixongroupcanada.com

Mexico:

Dixva, S. de R.L. de C.V.

Monterrey, N.L
Phone: [phone]-DIXON (34966)
Fax: [phone]
E-mail :[e-mail]

www.dixonvalve.com

Europe:

Dixon Group Europe Ltd

Preston, England
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]

www.dixoneurope.co.uk

Asia Pacific:

Dixon (Asia Pacific) Pty Ltd

Wingfield, South Australia
Phone: [phone]
Fax: [phone]

E-mail:[e-mail]

www.dixonvalve.com.au

For Sales & Service Contact

10154 Feb 2010

PRODUCT DESCRIPTIONS:

These instructions cover the following FloTech product:
FT201 Replacement 2 wire Optic Overfill Probe
FT202 2 wire Optic Overfill Sensor with 2”NPT Probe Holder
FT206 2 Wire Optic Retain Sensor with ½” NPT Probe Holder

FloTech FT201 and FT202 are mechanically and functionally compatible with Civacon R/M
models 1350 and 1050 ROM 2 wire optic sensors. FloTech FT206 sensor is compatible with
Civacon ROM models 1000 series. “Civacon” and “ROM” are registered trademarks of

Civacon / Dover Corporation.

INSTALLATION INSTRUCTIONS:

FloTech model FT202 can be mounted in a 2”NPT female pipe coupling or through a 2 3/8”

hole. When mounting in a 2 3/8” hole the gasket and lock nut provided are used to retain the

probe holder in the tank shell or manhole. After the sensor is mounted remove the cap.

Loosen the probe clamp screw and adjust the probe to the correct level point. This is typically
3% of compartment volume. It is not recommended cutting the standard 7” sensor to a shorter
length. This will cause insufficient time to stop the flow of product within the load racks
reaction time.

IMPORTANT: The actual sensing point adjustment should be determined by the total
response time required to prevent a tank overfill condition. The FloTech sensor reaction time
is one half second. The loading rack will also have a reaction time. Once the probe is adjusted
to the proper height, tighten the clamp screw.

10154 Feb 2010