Dixon 965882001, 965882101, 965882201, 965882301, 965981001 Owner’s Manual
...
|
Operator Manual
SPEEDZTR 44 / 965981001 SPEEDZTR 46 / 965882001
SPEEDZTR 54 / 965882101 SPEEDZTR 36 / 965882201
SPEEDZTR 44 / 965882301 SPEEDZTR 48 / 965882401
Please read the operator's manual carefully and make sure you
understand the instructions before using the machine,
In order to implement improvements, specifications and designs can be altered without prior
notification.
Note that no legal demands can be placed based on the information contained in these instructions.
Use only original parts for repairs. The use of other parts voids the warranty.
Do not modify or install non-standard equipment to the unit without consent from the manufacturer.
Modifications to the unit may cause unsafe operations or damage the unit.
@2008 HTC. All rights reserved.
Beatrice, NE. Printed in U.S.A.
TABLE OF CONTENTS
INTRODUCTION ....................................................... 5
Driving and Transport on Public Roads ................. 5
Towing ................................................................... 5
Operating ............................................................... 5
Good Service ......................................................... 6
SYMBOLS AND DECALS ......................................... 7
SAFETY ..................................................................... 9
Safety Instructions ................................................. 9
Personal Safety Equipment ................................. 11
Slope Operation .................................................. 11
Safe Handling of Gasoline ................................... 13
General Maintenance .......................................... 14
Transport ............................................................. 16
CONTROLS ............................................................. 17
Control Locations ................................................ 17
Motion Control Levers ......................................... 18
Seat Adjustment Lever ........................................ 19
Bypass Linkage ................................................... 19
Fuel Tank ............................................................. 20
Ignition Switch ..................................................... 21
Choke Control ..................................................... 21
Blade Switch ........................................................ 22
Parking Brake ...................................................... 22
Cutting Height Adjuster ........................................ 22
Fuses ................................................................... 23
Fuel Shut Off Valve .............................................. 23
OPERATION ............................................................ 24
Training ................................................................ 24
Steering ............................................................... 24
Before Starting .................................................... 25
Starting the Engine .............................................. 25
Weak Battery ....................................................... 28
Jumper Cables .............................................. 28
Running ............................................................... 29
Operating On Hills ............................................... 30
Mowing Tips ........................................................ 31
Stopping the Engine ............................................ 32
Manual Transport ................................................ 33
MAINTENANCE ...................................................... 34
Maintenance Schedule ........................................ 34
Battery ................................................................. 36
Ignition System .................................................... 37
Safety System ..................................................... 37
Engine Cooling Air Intake .................................... 38
Throttle Cable ...................................................... 38
Choke Cable ........................................................ 38
Air Filter ............................................................... 39
Kawasaki Engine ........................................... 39
Kohler Engine ................................................ 40
Briggs & Stratton Engine - 19 HP .................. 41
Briggs & Stratton Engine - 22 HP .................. 43
Fuel Filter ............................................................ 44
Fuel Pump Air Filter ............................................. 44
Tire Pressures ..................................................... 44
Parking Brake ...................................................... 45
V-belts ................................................................. 45
Deck Belt ....................................................... 45
Pump Belt ............................................................ 46
Cutting Blades ..................................................... 47
Blade replacement ........................................ 47
Adjusting the Mower Deck ................................... 48
Deck Leveling ................................................ 48
Anti-scalp rollers ............................................ 49
Caster Wheels ..................................................... 49
Hardware ............................................................. 49
Cleaning .............................................................. 50
Lubrication Schedule ........................................... 51
LUBRICATION ......................................................... 51
Front Wheel Mount .............................................. 52
Front Wheel Bearings .......................................... 52
Deck Spindle ....................................................... 52
Deck Outer Spindle ............................................. 52
Engine Oil ............................................................ 53
Engine Oil Levels .......................................... 53
Changing the Engine Oil ............................... 54
Cables ................................................................. 54
TROUBLE SHOOTING ........................................... 55
STORAGE ............................................................... 57
Winter Storage .................................................... 57
Service ................................................................ 57
SCHEMATIC ............................................................ 58
TECHNICAL DATA .................................................. 59
Accessories ......................................................... 59
Torque Specifications .......................................... 59
CONFORMITY CERTIFICATES .............................. 66
WARRANTY ............................................................ 67
SERVICE JOURNAL ............................................... 68
Delivery Service .................................................. 68
After the First 5-8 Hours ...................................... 69
25-Hour Service .................................................. 70
50-Hour Service .................................................. 71
100-Hour Service ................................................ 72
300-Hour Service ................................................ 73
At Least Once Each Year .................................... 74
WARNING!
Failure to follow cautious operating practices can result in serious injury to the
operator or other persons. The owner must understand these instructions, and must
allow only trained persons who understand these instructions to operate the mower.
Each person operating the mower must be of sound mind and body and must not be
under the influence of any mind altering substance.
WARNING!
Engine exhaust, some of its constituents, and certain vehicle components contain or
emit chemicals known to the State of California to cause cancer and birth defects or
other reproductive harm.
WARNING!
Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
INTRODUCTION
Congratulations
Thank you for purchasing a Dixon ride-on mower. This
machine is built for superior efficiency to rapidly mow
primarily large areas. A control panel easily accessible
to the operator and a hydrostatic transmission
regulated by steering controls both contribute to the
machine's performance.
This manual is a valuable document. Read the
contents carefully before using or servicing the
machine. The following of instructions (use, service,
maintenance, etc.) by all who operate this machine
is important for the safety of the operator and others.
It can also considerably increase the life span of the
machine and increase its resale value.
If you sell your machine, be sure to give the operator's
manual to the new owner.
The final chapter of this operator's manual provides a
Service Journal. Ensure that service and repair work
are documented. A well-kept service journal reduces
service costs for the maintenance and affects the
machine's resale value. Please contact your dealer for
more information. Take the operator's manual along
when the machine is taken to your dealer for service.
General
In this operator's manual, left and right, backward and
forward are used in relation to the machine's normal
driving direction.
Continuous dedication to improve our products require
that specifications and design are subject to change
without notice.
Driving and Transport on Public Roads
Check applicable road traffic regulations before
transporting on public roads. If the machine is
transported, you must always use approved fastening
equipment and ensure that the machine is well
anchored. DO NOT operate this machine on public
roadways.
Towing
If machine is equipped with a tow hitch, use extreme
caution when towing. Never allow children or others in
or on the towed equipment. Make wide turns to avoid
jack-knifing. Travel slowly and allow extra distance to
stop.
Do not tow on sloped ground. The weight of the towed
equipment may cause loss of traction and loss of
control.
Follow the manufacturer's recommendation for weight
limits for towed equipment. Do not tow near ditches,
canals, and other hazards.
Operating
This machine is constructed only for mowing grass
on lawns and even ground without obstacles such
as stones, tree stumps, etc. The machine can also
be used for other tasks when equipped with special
accessories provided by the manufacturer. Operating
instructions for the accessories are provided with
delivery. All other types of uses are incorrect. The
manufacturer's directions concerning operation,
maintenance, and repairs must be carefully followed.
Lawn mowers and all power equipment, can be
potentially dangerous if used improperly. Safety
requires good judgement, careful use in accordance
with these instructions and common sense.
The machine must only be operated, maintained, and
repaired by persons familiar with the machine's special
characteristics and who are also knowledgeable about
the safety instructions. Use only approved repair parts
to maintain this machine.
Accident prevention regulations, other general safety
regulations, occupational safety rules, and traffic
regulations must be followed without fail.
Unauthorized modifications to the design of the
machine may absolve the manufacturer from liability
for any resulting personal injury or property damage.
DIXON-5
INTRODUCTION
Good Service
Dixon's products are sold only in specialized retail stores with complete service. This ensures that you as
a customer receive only the best support and service. Before the product is delivered, the machine has, for
example, been inspected and adjusted by your retailer. See the certificate in the Service Journal in this operator's
manual.
When you need spare parts or support in service questions, warranty issues, etc., please consult the following
professional:
This Operator's Manual belongs to the machine with Engine Transmission
the manufacturing number:
Manufacturing Number
The machine's manufacturing number can be found on the printed plate affixed to the right in the engine
compartment. Stated on the plate, from the top are:
• The machine's type designation (I.D.).
• The manufacturer's type number (Model).
• The machine's serial number (Serial no.)
Please have the type designation and serial number available when ordering spare parts.
The engine's manufacturing number is stamped on one of the valve covers.
The plate states:
• The engine's model.
• The engine's type.
• Code
Please have these available when ordering spare parts.
6-DIXON
SYMBOLS AND DECALS
These symbols are found on the machine and in the operator's manual.
Study them carefully so that you know what they mean.
WARNING!
Xxxx xxxxxx xxxxx xxxx
xxxxxxxxx xxxxxx xxxxxxxxx, xx
xxxxxxxx xxxx xxxxxx.
Used in this publication to notify the reader of a risk of personal injury or death, particularly if the reader should
neglect to follow instructions given in the manual.
IMPORTANT INFORMATION
Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx
xxxxxxxxx, xx xxxxxxxx xxxx xxxxxx.
Used in this publication to notify the reader of a risk of material damage, particularly if the reader should neglect
to follow instructions given in the manual. Used also when there is a potential for misuse or misassembly.
Reverse Neutral Fast Slow Choke Fuel
A
Warning!
Parking Brake CE conformity
marking. Only for
European market
Warning! Rotating blades,
keep away from the
discharge deck
Do not touch parts
1105,*,
Battery acid is corrosive, explosive and flammable
Use protective glasses Use protective gloves
Do not standhere
Noise emissions to the
surroundings in accordance
with the European Union's
directive. The machine's
emission is stated in the
chapter TECHNICAL DATA
and on the decals.
Only machines for European
market
DIXON-7
SYMBOLS AND DECALS
Read
Operator's
Manual
Whole body
exposure to
thrown objects
Shut off engine and Keep a safe Use on slopes
remove key before distance from no greater
performing any the machine than 10 °
maintenance or repair work
A
Severing of fingers
and toes
DANGER
Do not open or
remove safety
shields while
engine is running
)
Careful backing up,
watch for other
people
No passengers
Careful going
forward, watch for
other people
8-DIXON
Moving sharp blades under cover
SAFETY
Safety instructions
These instructions are for your safety. Read them carefully.
WARNING!
This symbol means that important safety instructions need to be emphasized. It concerns
your safety.
iMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING
OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH.
General Operation
• Read, understand, and follow all instructions on
the machine and in the manual before starting.
• Do not put hands or feet near rotating parts or
under the machine. Keep clear of the discharge
opening at all times.
• Only allow responsible adults, who are familiar
with the instructions, to operate the machine.
• Clear the area of objects such as rocks, toys, wire,
etc., which could be picked up and thrown by the
blades.
• Be sure the area is clear of bystanders before
operating. Stop machine if anyone enters the area.
• Never carry passengers. The machine is only
intended for use by one person.
• Do not mow in reverse unless absolutely
necessary. Always look down and behind before
and while backing.
• Never direct discharged material toward anyone.
Avoid discharging material against a wall or
obstruction. Material may ricochet back toward the
operator. Stop the blades when crossing gravel
surfaces.
• Do not operate machine without the entire grass
catcher, discharge guard, or other safety devices
in place and working
• Slow down before turning.
• Never leave a running machine unattended.
Always turn off blades, set parking brake, stop
engine, and remove keys before dismounting.
• Disengage blades when not mowing. Shut off
engine and wait for all parts to come to a complete
stop before cleaning the machine, removing the
grass catcher, or unclogging the discharge guard.
• Operate machine only in daylight or good artificial
light.
• Do not operate the machine while under the
influence of alcohol or drugs.
Read the operator's manual before starting the machine
Clear the area of objects before mowing
8011-512
8011-513
DIXON-9
SAFETY
• Watch for traffic when operating near or crossing
roadways.
• Use extra care when loading or unloading the
machine into a trailer or truck.
• Always wear eye protection when operating
machine.
• Data indicates that operators age 60 years and
above are involved in a large percentage of riding
mower=related injuries. These operators should
evaluate their ability to operate the riding mower
safely enough to protect themselves and others
from serious injury.
• Follow the manufacturer's recommendation for
wheel weights or counterweights.
• Anyone who operates this machine must first read
and understand this Operation Manual. Local laws
may regulate the age of the user.
• Keep machine free of grass, leaves or other debris
buildup which can touch the hot exhaust or engine
parts and burn. Do not allow the mower deck to
plow leaves or other debris, causing buildup to
OCCUr.
• Clean any oil or fuel spillage before operating or
storing the machine.
• Allow machine to cool before storage.
8011-520
Never take passengers
_IL ARNING!
Engine exhaust and certain vehicle
components contain or emit chemicals
considered to cause cancer, birth
defects, or other reproductive system
damage. The engine exhaust contains
carbon monoxide, which is a odorless,
colorless, poisonous gas. Do not use
the machine in enclosed spaces.
1O-DIXON
Personal Safety Equipment
SAFETY
_IL ARNING!
When using the machine, approved personal protective equipment (shown in illustrations)
shall be used. Personal protective equipment cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing
the right equipment.
• Make sure that you have first aid equipment close
at hand when using the machine.
• Never use the machine when barefoot.
• Always wear protective shoes or boots, preferably
with steel toe caps.
• Always wear approved protective glasses or a full
visor when assembling or driving.
• Always wear gloves when handling the blades.
• Never wear loose clothing that can get caught in
moving parts.
• Use ear protectors to avoid damage to hearing.
Slope Operation
Slopes are a major factor related to loss of control and
tip-over accidents, which can result in severe injury or
death. Operation on all slopes requires extra caution. If
you cannot back up the slope or if you feel uneasy on
it, do not mow it.
• Mow up and down slopes (10 degrees maximum),
not across.
• Watch for holes, ruts, bumps, rocks, or other
hidden objects. Uneven terrain could overturn the
machine. Tall grass can hide obstacles.
• Choose a low ground speed so that you will not
have to stop while on the slope.
• Do not mow on wet grass. Tires may lose traction.
• Avoid starting, stopping, or turning on a slope. If
the tires lose traction, disengage the blades and
proceed slowly straight down the slope.
• Keep movement on the slopes slow and gradual.
Do not make sudden changes in speed or
direction, which could cause machine to roll over.
• Use extra care while operating machine with grass
catchers or other attachments; they can affect the
stability of the machine.
• Do not use on steep slopes.
• Do not try to stabilize the machine by putting a foot
on the ground.
• Do not mow near drop-offs, ditches, or
embankments. The machine could suddenly roll
over ifa wheel is over the edge or if the edge
caves in.
8011-670a
Personal protective equipment
6003-004
Mow up and down, not side to side
_L WARNING!
__ Do not drive up or down hills with
slopes greater than 10 degrees. And
do not drive across any slopes.
DIXON-11
SAFETY
Children
Tragic accidents can occur if the operator is not alert to
the presence of children. Children are often attracted
to the machine and the mowing activity. Never assume
that children will remain where you last saw them.
• Keep children out of the mowing area and in
the watchful care of a responsible adult other
than the operator.
• Be alert and turn machine off if a child enters
the area.
• Before and while backing, look behind and
down for small children.
• Never carry children, even with the blades shut
off. They may fall off and be seriously injured
or interfere with safe machine operation.
Children who have been given rides in the past
may suddenly appear in the mowing area for
another ride and be run over or backed over by
the machine.
• Never allow children to operate the machine.
• Use extra care when approaching blind
corners, shrubs, trees, or other objects that
may block your view of a child.
8011-509
Be extra cautious when driving on slopes
12-DIXON
8011-517
Never allow children to operate the machine
8011-518
Keep children away from work area
WARNING!
The engine must not be started when the driver's floor plate or any protective plate for the
mower deck's drive belt is removed.
Safe Handling of Gasoline
To avoid personal injury or property damage, use
extreme care in handling gasoline. Gasoline is
extremely flammable and the vapors are explosive.
* Extinguish all cigarettes, cigars, pipes, and
other sources of ignition.
* Use only approved gasoline container.
* Never remove gas cap or add fuel with the
engine running. Allow engine to cool at least
two (2) minutes before refueling.
* Never fuel the machine indoors.
* Never store the machine or fuel container
where there is an open flame, spark, or pilot
light such as on a water heater or other
appliance.
* Before you begin refueling, minimize the risk of
static electricity by touching a metal surface.
* Never fill containers inside a vehicle or on a
truck or trailer bed with plastic liner. Always
place containers on the ground away from the
vehicle when filling.
* Remove gas-powered equipment from the
truck or trailer and refuel it on the ground. If
this is not possible, refuel such equipment
with a portable container, rather than from a
gasoline dispenser nozzle.
* Keep the nozzle in contact with the rim of the
fuel tank or container opening at all times until
fueling is complete. Do not use a nozzle lock-
open device.
* If fuel is spilled on clothing, change clothing
immediately.
* Never overfill fuel tank. Replace gas cap and
tighten securely.
* Do not start the engine near spilled fuel.
* Never use gasoline as a cleaning agent.
* If leaks arise in fuel system, engine must not
be started until problem has been resolved.
* Check the fuel level before each use and leave
space for the fuel to expand, as the heat from
the engine and the sun may otherwise cause
the fuel to expand and overflow.
SAFETY
8011-516
Never fill the fuel tank indoors
WARNING!
The engine and the exhaust system
become very hot during operation.
There is risk for burns if touched.
Allow engine and exhaust system to
cool at least two (2) minutes before
refueling.
DIXON-13
SAFETY
General Maintenance
• Never operate machine in a closed area.
• Keep all nuts and bolts tight to be sure the
equipment is in safe working condition.
• Never tamper with safety devices. Check their
proper operation regularly.
• Keep machine free of grass, leaves, or other
debris buildup. Clean oil or fuel spillage and
remove any fuel-soaked debris. Allow machine to
cool before storing.
• If you strike a foreign object, stop and inspect the
machine. Repair, if necessary, before restarting.
• Never make any adjustments or repairs with the
engine running.
• Check grass catcher components and the
discharge guard frequently and replace with
manufacturer's recommended parts, when
necessary.
• Mower blades are sharp. Wrap the blade or wear
gloves, and use extra caution when servicing
them.
• Check brake operation frequently. Adjust and
service as required.
• Maintain or replace safety and instruction labels,
as necessary.
• Do not modify safety equipment. Check regularly
to be sure it works properly. The machine must not
be driven with defective or unmounted protective
plates, protective cowlings, safety switches, or
other protective devices.
• Do not change the settings of governors and avoid
running the engine with overly high engine speeds.
If you run the engine too fast, you risk damaging
the machine components.
• Be very careful when handling battery acid. Acid
on skin can cause serious corrosive burns. If you
spill battery acid on your skin, rinse immediately
with water.
• Acid in the eyes can cause blindness, contact a
doctor immediately.
• Be careful when servicing the battery. Explosive
gases form in the battery. Never perform
maintenance on the battery when smoking or near
open flames or sparks.
• The battery can explode and cause serious injury
or damage.
• Ensure that nuts and bolts, especially the
fastening bolts for the blade attachments, are
properly tightened, torqued and that the equipment
is in good condition.
8011-515
Never drive the machine in an enclosed space
_ WARNING!Use protective glasses for
maintenance work.
WARNING!
The battery contains lead and lead
compounds, chemicals that are
considered to cause cancer, birth
defects, and other reproductive
system damage. Wash your hands
after handling the battery.
14-DIXON
SAFETY
• Do not change the settings of governors and avoid
running the engine with overly high engine speeds.
If you run the engine too fast, you risk damaging
the machine components.
• Sparking can occur when working with the battery
and the heavy cables of the starter circuit. This
can cause battery explosion, fire or eye injury.
Sparking in this circuit can not occur after the
chassis cable (normally negative, black)is
removed from the battery.
• Use protective goggles.
• Ensure that the fuel filler cap is mounted tightly
and no flammable substances are stored in an
open vessel.
• Never work with the starter circuit if there is spilled
fuel.
_lll= WARNING!Avoid electrical sparking and its
consequences by the following
routines:
6003-009
Do not smoke whenperforming maintenance on the battery.
Thebattery can explode and cause serious injury/damage.
• Disconnect the chassis cable from the battery first
and reconnect it last.
• Do not make a bridge short circuit across the
starter relay to run the starter.
• Never use the machine indoors or in spaces
lacking proper ventilation. The exhaust fumes
contain carbon monoxide, an odorless, poisonous,
and lethal gas.
• Stop to inspect the equipment if you run over or
into anything. If necessary, make repairs before
starting.
• Never make adjustments with the engine running.
• The machine is tested and approved only with the
equipment originally provided or recommended by
the manufacturer. Only use approved repair parts
for the machine.
• The blades are sharp and can cause cuts and
gashes. Wrap the blades or use protective gloves
when handling them.
• Check the parking brake's functionality regularly.
Adjust and service as necessary.
• The mulch blades should only be used in familiar
areas when higher quality mowing is desired.
• Reduce the risk of fire by removing grass, leaves,
and other debris that may have accumulated on
the machine. Allow the machine to cool before
putting it in storage.
8009-728
Risk of sparking
DIXON-15
• The blades are sharp and can cause cuts and
gashes. Wrap the blades or use protective
gloves when handling them.
• Check the parking brake's functionality
regularly. Adjust and service as necessary.
• The mulch blades should only be used in
familiar areas when higher quality mowing is
desired.
• Reduce the risk of fire by removing grass,
leaves, and other debris that may have
accumulated on the machine. Allow the
machine to cool before putting it in storage.
• Regularly clean deck and underside of
deck, avoid spraying engine and electrical
components with water.
Transport
• The machine is heavy and can cause serious
crushing injuries. Be extra cautious when it is
loaded on or unloaded from a vehicle or trailer.
• Use an approved trailer to transport the
machine. Activate the parking brake, turn off
the fuel supply, and fasten the machine with
approved fastening devices, such as bands,
chains, or straps, when transporting.
• Do not operate this machine on public
roadways.
• Check and abide by local traffic regulations
before transporting the machine on any road.
• Do not tow this machine, it may cause damage
to the drive system.
• Do not tow any trailers, etc. with this mower.
They may jackknife or overturn causing
damage to the mower and possibly serious
injury to the operator.
• Load the unit onto truck or trailer by driving up
ramps of suitable strength using a slow speed.
Do not lift! The machine is not intended to be
lifted by hand.
SAFETY
8011-514
Regularly clean deck
WARNING!
Escaping hydraulic oil under pressure
can have sufficient force to penetrate
the skin, causing serious injury.
If injured by escaping fluid, see a
doctor at once. Serious infection
or reaction can develop if proper
medical treatment is not administered
immediately.
IMPORTANT INFORMATION
The parking brake is not sufficient to lock the
machine in place during transport. Ensure that
the machine is well fastened to the transport
vehicle. Always reverse the machine onto the
transport vehicle to avoid tipping it over.
16-DIXON
CONTROLS
This operator's manual describes the Dixon Zero
Turn Rider. The rider is fitted with a Briggs & Stratton,
Kawasaki or Kohler four-stroke overhead valve engine
developing 17 - 24 horse power.
Control Locations
Transmission from the engine is made via two belt-
driven hydraulic pumps. Using the left and right
steering controls, the flow is regulated and thereby the
direction and speed.
10
©
O®
®
@
©
o
®
©
©
©
O0 o
1. Motion Control Levers
2. Lift Lever
3. Choke Control
4. Throttle
5. Blade Switch
\
6. Ignition Switch
7. Seat Adjustment Lever
8. Bypass Linkage
9. Fuel Tank
10. Parking Brake
DIXON-17
CONTROLS
Motion Control Levers
The machine's speed and direction are continuously
variable using the two steering controls. The steering
controls can be moved forward or backward about
a neutral position. Furthermore, there is a neutral
position, which is locked if the steering controls are
moved outward.
When both controls are in the neutral position (N), the
machine stands still.
By moving both controls an equal amount forward
or backward, the machine moves in a straight line
forward or backward respectively.
In order, for example, to turn right while moving
forward, move the right control towards the neutral
position. The rotation of the right wheel is reduced and
the machine turns to the right.
Zero turn can be achieved by moving one control
backward (behind the neutral position) and carefully
moving the other steering control forward from its
neutral position. The rotation direction when zero
turning is determined by which steering control is
moved backward behind the neutral position.
If the left steering control is pulled backward, the
machine turns to the left. Use extra care when using
this maneuver.
If the steering controls are in uneven positions when
standing still or do not fit in the slots for moving the
controls outward, they can be adjusted
8050-833
Steering controls
WARNING!
The machine can turn very rapidly if
one steering control is moved much
further forward than the other.
18-DIXON
2
4
\
8050-166-1
1. Forward
2. Neutral
3. Neutral slot, Neutral Sock
4. Reverse
Motion control lever pattern (right side)
CONTROLS
Seat Adjustment Lever
The seat can be adjusted lengthways. Release
levers are located at the lower front right, or on the
right side--depending on model. When making
adjustments, sit on the seat. Slide the lever and
maneuver seat to appropriate placement and release
lever.
Bypass Linkage
Unlocking Transmission
When pushing or pulling the mower, engage the EZT
(Integrated Zeroturn Transaxle) bypass linkages. The
EZT bypass linkages are located on the rear of the
frame, below the rear engine guard.
1. Raise the deck into the highest cutting position.
2. Pull the EZT bypass linkages up and out of
the keyhole slots. Release the levers with the
head outside the flame and held in the bypass
position.
3. To reengage the EZT's to drive, reverse the
above procedure.
Load the machine into truck or trailer by driving up
ramps in low gear. DO NOT LIFT! The machine is not
intended to be lifted by hand.
8050-165
Seat adjustment
8058-032
Bypass flnkage, EZT engaged
IMPORTANT INFORMATION
Before pushing or towing tractor, transmission
must be unlocked and park brake released.
The tractor should never be pulled at more
than 2 miles per hour (3.2 km/h) or for
distances over 1/4mile (.402 km). Trailer the
unit for distances over 1/4mile.
8058-032
Bypass linkage, EZT locked in the bypass position
DIXON-19
CONTROLS
Fuel Tank
The machine has one fuel tank, just behind the seat.
The tank capacity is 4.5 gallons (17 liters).
The engine will run on a minimum of 85-octane
unleaded gasoline (no oil mix). Environmentally
adapted alkylate gasoline can be used. See also
Technical Data concerning ethanol fuel. Methanol fuel
is not allowed.
When operating below 32°F (0°C) use fresh, clean
winter grade gasoline to help insure good cold weather
starting.
WARNING!
Gasoline is highly flammable. Observe
caution and fill the tank outdoors. (See
Safety)
WARNING!
Fill to the bottom of the filler neck. Do
not overfill. Wipe off any spilled oil or
fuel. Do not store, spill or use gasoline
near an open flame.
WARNING!
The engine and the exhaust system,
become very hot during operation.
Risk for burns if touched.
Allow engine and exhaust system to
cool at least two (2) minutes before
refueling.
Fuel tank
8058-833
IMPORTANT INFORMATION
Experience indicates that alcohol blended
fuels (called gasohol, ethanol or methanol) can
attract moisture which leads to separation and
formation of acids during storage. Acidic gas
can damage the fuel system of an engine while
in storage. To avoid engine problems, the fuel
system should be emptied before storage of
30 days or longer. Drain the gas tank, start the
engine and let it run until the fuel lines and
carburetor are empty. Use fresh fuel the next
season. See Storage Instructions for additional
information. Never use engine or carburetor
cleaners in the fuel tank or permanent damage
may occur.
20-DIXON
CONTROLS
ignition Switch
The ignition key is placed on the driver's panel and is
used to start and stop the engine,
IMPORTANT INFORMATION
Do not run the starter for more than five
seconds each time. If the engine does not
start, wait about 10 seconds before retrying.
Choke Control
The choke is used for cold starts to provide the engine
with a richer fuel mixture. Pull the choke control knob
up.
( .......
8050-817-1
Ignition Switch
Throttle Control
The throttle control regulates the engine speed and
thereby the rate of rotation of the blades, assuming the
blade switch is pulled out, see Engaging the Mower
Deck.
In order to increase or decrease the engine speed, the
control is moved.
Avoid idling the engine for long periods, as there is a
risk of fouling the spark plug.
USE FULL THROTTLE WHEN MOWING, for best
mower performance and battery charging.
Choke control
8050-817-1
8050-817-1
Throttlecontrol
DIXON-21
CONTROLS
Blade Switch
In order to engage the mower deck, pull the knob out;
the mower blades are disengaged when the knob is
depressed.
i
Parking Brake
The parking brake is found on the left of the machine.
Push the release button and pull the lever backward to
activate the brake--push forward to release it.
The park brake is designed to hold the mower from
moving and is not intended for use in stopping the
mower while it is in motion. The engine will stop if the
park brake is engaged while the control levers are in
the drive position.
IMPORTANT INFORMATION
The machine must stand absolutely still when
applying the parking brake. Always set the
parking brake before dismounting. Release the
parking brake before moving the mower.
Cutting Height Adjuster
To set the desired deck cutting height, press the
release button and move the lever forward to the
correct cutting height on the cutting plate. The cutting
height range is from 1½" (38mm) to 4" (102mm) in
½" (13mm)increments. The heights are measured
from the ground up to the blade tip with the engine not
running.
Blade switch
8050-817-1
8058-020
Released parking brake
IMPORTANT INFORMATION
Always use the high position to transport.
22-DIXON
8050-825
Cut height lift lever
IMPORTANT INFORMATION
In order to obtain an even cutting height it is
important that the air pressure in all four tires
is the same 15 psi (1 bar).
CONTROLS
Fuses
Fuses are located on the left hand side of the machine.
They are accessed by tilting the seat forward. They are
flat pin fuses of the same type used in automobiles,
There are two fuses with ratings and functions:
20 Amp Primary fuse
7.5 Amp Mower deck coupling
Fuel Shut Off Valve
The fuel shut off valve is located at the left rear of the
seat. The valve is off when the handle tab is turned
perpendicular to the fuel line,
8011-420
Fuses
Fuel shut off valve in the CLOSED position
8011-419
DIXON-23
Loading...