dixell XWEB5000 EVO, XWEB3000 EVO Installation Manual
XWEB3000/5000 EVO (V.1.6)
INSTALLATION MANUAL
1592010870 XWEB3000-5000 EVO STP GB r1.6 12.10.2018.doc XWEB3000/5000 EVO 2/22
TABLE OF CONTENTS
1. PRODUCT DISPOSAL (WEEE) ............................................................................................................... 4
2. THE RECIPIENTS OF THIS MANUAL ..................................................................................................... 4
3. PACKAGE ................................................................................................................................................. 5
4. INSTALLATION ........................................................................................................................................ 6
4.1 CONTROLLER INSTALLATION PROCEDURE .......................................................................................... 9
4.2 CONTROLLER CONFIGURATION ........................................................................................................ 10
4.2.1 CONFIGURATION FOR XC400/600/800/900 and XH200/300/400 SERIES ................................. 10
4.2.2 CONFIGURATION FOR XJA/XJP/XJM MODELS ........................................................................... 10
4.2.3 ENERGY METERS AND THIRD PARTY INSTRUMENT CONFIGURATION ...................................... 11
5. LOCAL CONNECTIVITY ......................................................................................................................... 12
6. REMOTE CONNECTIVITY ...................................................................................................................... 13
6.1 GENERAL RULES, AND MINIMUM REQUIREMENTS .......................................................................... 13
6.2 DESKTOP ............................................................................................................................................ 14
6.3 MOBILE .............................................................................................................................................. 14
6.4 CONNECTIVITY WITH CROSS CABLE .................................................................................................. 15
6.5 MODEM CONNECTIVITY (“OR POINT-TO-POINT CONNECTION”) ..................................................... 17
6.5.1 SETTING UP THE REMOTE ACCESS CONNECTION ...................................................................... 17
6.5.2 MAKING THE REMOTE ACCESS CALL ......................................................................................... 18
6.6 INTRANET (“OR LAN CONNECTION”) AND VPN CONNECTIVITY ....................................................... 19
6.7 INTERNET CONNECTIVITY ON PUBLIC IP ........................................................................................... 20
7. OPERATION............................................................................................................................................ 20
8. SYSTEM DATA ....................................................................................................................................... 21
9. TRADEMARKS ....................................................................................................................................... 21
10. NOTES ..................................................................................................................................................... 22
1592010870 XWEB3000-5000 EVO STP GB r1.6 12.10.2018.doc XWEB3000/5000 EVO 3/22
CAUTION: TO PREVENT FLAMES FROM DEVELOPING OR ELECTRIC SHOCK,
AVOID ANY CONTACT BETWEEN THIS DEVICE AND RAIN OR WATER
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER IT DOES NOT
CONTAIN ANY PARTS THAT REQUIRE SERVICING BY
THE USER ALWAYS HAVE QUALIFIED STAFF
PERFORM THE PROCEDURES.
THE SYMBOL OF THE LIGHTNING BOLT INSIDE AN
EQUILATERAL TRIANGLE IS USED TO ALERT THE
USER OF THE POTENTIALLY DANGEROUS NONINSULATED ELECTRICAL VOLTAGES
THE SYMBOL OF THE EXCLAMATION MARK INSIDE
AN EQUILATERAL TRIANGLE IS USED TO WARN THE
USER THAT HE/SHE MUST PAY CLOSE ATTENTION
TO THE TOPIC COVERED IN THIS MANUAL
CAUTION
This device must be installed exclusively by service staff with suitable technical
training and experience, who are aware of the dangers that they are exposed to.
The operations described herein are set forth exclusively for the service staff. The
user is not enabled to open the device.
CAUTION
Only use modems that are officially supported by this monitoring unit. Dixell srl
cannot be held responsible for any damage caused by the use of non-supported
modems.
CAUTION
Dixell srl reserves the right to amend this manual without prior notice. The latest
available version can be downloaded from the internet site.
CAUTION
The instructions contained in this manual are common for models
XWEB3000EVO/XWEB5000EVO. Any particular features are specified expressly.
CAUTION
This control and monitoring unit fulfils EN 12830 for use with probes to detect
measurements referred to in 13485
CAUTION
This is a class A product. It can cause radio-interference in residential
environments. Should this occur, the user should take suitable counter-measures
CAUTION
Dixell srl reserves the right to vary the composition of its products without prior
notice to the customer, ensuring the identical and unchanged features of the same
1592010870 XWEB3000-5000 EVO STP GB r1.6 12.10.2018.doc XWEB3000/5000 EVO 4/22
CAUTION
The customer shall bear full responsibility and risk for product configuration in order
to achieve the results pertaining to installation and/or final equipment/system. Upon
the customer's request and following a specific agreement, Dixell s.r.l. may be
present during the start-up of the final machine/application, as a consultant,
however, under no circumstances can the company be held responsible for the
correct operation of the final equipment/system.
CAUTION
Since Dixell products form part of a very high level of technology, a
qualification/configuration/programming/commissioning stage is required to use
them as best as possible. Otherwise, these products may malfunction and Dixell
cannot be held responsible. The product must not be used in any way that differs
from that stipulated in the documentation
1. PRODUCT DISPOSAL (WEEE)
With reference to Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003
and to the relative national legislation, please note that:
➢ There lies the obligation not to dispose of electrical and electronic waste as municipal waste but to
separate the waste.
➢ Public or private collection points must be used for disposal, in accordance with local laws. Furthermore,
at the end of the product's life, it is also possible to return this to the retailer when a new purchase is
made.
➢ This equipment may contain hazardous substances. Improper use or incorrect disposal can have
adverse effects on human health and the environment.
➢ The symbol shown on the product or the package indicates that the product was placed on the market
after 13th August 2005 and must be disposed of as separated waste.
➢ Should the product be disposed of incorrectly, sanctions may be applied as stipulated in applicable local
regulations regarding waste disposal.
2. THE RECIPIENTS OF THIS MANUAL
The contents of this manual are intended for professional users, such as XWEB installers. It may also be of
use to the administrator of the network that it is connected to.
The mechanical product drawings required for any form of intervention and the possible network
configurations are all an integral part of this manual.
1592010870 XWEB3000-5000 EVO STP GB r1.6 12.10.2018.doc XWEB3000/5000 EVO 5/22
3. PACKAGE
Before opening the package make sure that the packaging is intact and that there is no sign of impact or
tampering. Before starting any operation, it is necessary to check that the XWEB-EVO box contains:
• 1 XWEB-EVO Unit
• 1 power cord
• 2 RACK mount brackets
• 8 Screws to attach the RACK brackets to the XWEB Box
• Disconnectable female connectors (2x2-way, 2x3-way, 1x6-way)
• 4 Rivet feet for table set-up
• 6 Jumpers WITHOUT CLIPS for terminators (JMP1-6)
• 1 DVI-VGA Converter
• 1 Rapid Installation Manual in A5 format
If one of the following parts is damaged, promptly contact your dealer.
You can also receive a modem - which will not be included in the same package - as an option. When using
a connection through the modem, always make sure that the type of modem you are about to install is a
Dixell-approved model; accordingly, Dixell will not be held responsible for the poor operation of devices that
are not expressly approved. The user manual, in the "manuals" section of the Dixell site, contains a list of
supported models.
1592010870 XWEB3000-5000 EVO STP GB r1.6 12.10.2018.doc XWEB3000/5000 EVO 6/22
4. INSTALLATION
For installation, the XWEB-EVO system must not be opened in any way. If the box is opened, the warranty
will lapse.
XWEB-EVO can be installed in various ways based on the type of user interface access that you wish to
provide for the final user. Below is a description of the most complete procedure, i.e. where the system's
user interface can be used entirely in local control. If the system has already been configured and you wish
to use the interface through modem or Ethernet, points 5 to 9 may be optional. The particular features of
these types of connectivity are described herein.
To set up a local installation of the system, we recommend having the following equipment available:
• a Phillips and a slot-head screwdriver;
• a PS2 or USB mouse;
• a PS2 or USB keyboard;
• a monitor with a DVI or VGA connector. We recommend
using high definition monitors
The system must be installed referring to the figure below, which
illustrates the rear XWEB-EVO panel, and following the points listed
here:
1. The product has a power plug with protective earth. Make sure that
the electrical system has a protective earth connection;
2. Attach the XWEB-EVO device in the position it will be used in. If it is
installed on a table, set the rubber feet up in the holes on the
underside of the device. For rack installation, on the other hand, use
the supplied brackets and screws.
3. Connect it to the power mains by the supplied power cord (1). Set
the power plug up so that it is easily accessible at all times. Note:
Do not turn the system on;
4. Connect the RS485, the relays and digital inputs (2)(4)(16)(14)(17),
and end and/or polarise the line, if necessary (3)(15);
5. Connect any telephone lines and/or LAN network cables (7);
6. Connect any keyboard and mouse (9)(10)(11);
7. Connect any monitors (12);
8. Connect any printers (11);
9. Connect any modem: internal modem (13) or external modems (05).
The cable must not be any longer than 10 m.
10. It is now possible to turn the system on by pressing and releasing
(18);
For operator safety and to
protect the XWEB
system, before
performing any sort of
operation, connect the
system to the electrical
network by the supplied
cable. Power cord must
be the last to be removed.
• Avoid direct passage between
operators as much as possible
(to avoid electrostatic induction
and subsequent discharges);
• If the electrical voltage supply
differs from the required rating,
this could seriously damage the
system;
• Connection errors (and
connections that differ from the
prescribed ones) can pose a
danger to operator safety and
cause faults in the system and
to the instruments that are
connected to it;
• Insert one or more easily
accessible disconnecting
devices to the exterior of the
device to separate the device
from the power mains;
• Do not use the device in
environments with flammable
gases.
• Do not modify the device in any
way.
1592010870 XWEB3000-5000 EVO STP GB r1.6 12.10.2018.doc XWEB3000/5000 EVO 7/22
Technical features
Power supply
100-230 V
Power
60 W
Voltages and maximum current applicable to the AUX
terminals 1-2-3
AUX1-2-3 24V
AUX1 8A
AUX2-3 4A
Operating conditions (temperature, humidity, special
conditions)
0/45°C R.H.5÷95% (non-condensing)
Electrical safety (reference standards)
Standard EN 60950-1
Electromagnetic compatibility (reference standards)
Immunity
EN 61000-6-2:2005
EN 55024:1998 + /A1:2001 +/A2:2003
EN 61000-4-2:2009
EN61000-4-3:2006 +/A1:2008
EN61000-4-4:2004
EN 61000-4-5:2006
EN 61000-4-6:2009
EN 61000 -4 -8:1993 +/ A1:2001
EN 61000-4-11:2004
Emissions
EN 55022:2006+/A1:2007
EN 61000-3-2:2006 +/A1:2009 +/A2:2009
EN 61000-3-3 :2008
Internal modem: list of supported countries
Argentina
France
Latvia
Russia
Australia
Germany
Liechtenstein
Singapore
Austria
Greece
Lithuania
Slovak Republic
Belgium
Hong Kong, S.A.R. of
China
Luxembourg
Slovenia
Brazil
Hungary
Malaysia
South Africa
Canada
Iceland
Malta
Spain
Chile
India
Mexico
Sweden
China
Indonesia
Netherlands
Switzerland
Cyprus
Ireland
New Zealand
Taiwan
Czech Republic
Israel
Norway
Thailand
Denmark
Italy
Philippines
Turkey
Estonia
Japan
Poland
United Kingdom
Finland
Korea
Portugal
United States
CAUTION:
The terminal block to connect AUX1, AUX2 and AUX3 relays
cannot be used to pilot high voltage loads directly (higher to
24V). Use an intermediate low voltage circuit and/or suitable
remote switch.
Loading...