Divoom Technology BLUETUNE 1 User Manual
User manual
War ni ng:
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Install in accordance with the manufacturer’s instructions.
Place the speakers in a stable location so they will not fall causing damage to the speakers or cause
bodily harm.
Do not use the speakers near water, and do not immerse them in any liquid or pour any liquid on
them.
Do not block the openings on the speaker cabinets, never push objects into speaker vents or slots
because of fire or electric hazards, Please insure reasonable space around the speakers for proper
ventilation.
Do not install near any heat sources such as ra diators, heat registers, stoves, or other
apparatus(including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
Do not place near any form of open flame source, such as lighted candles, on the apparatus.
Do not get the speaker wet.
Refer all servicing to qualified service personnel.
Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC R ules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in co njunction with any other
antenna or transmitter.
Wel co me:
Thank you for purchasing this product.
Bluetooth
bluetooth-enabled devices and can also link to any of your wired speakers to enjoy wireless
listening. This instruction manual will get you started and ready to make the most of y our
Multimedia Speaker System of your Multimedia Speaker System
Package Contents:
The package contains the following:
1 pc of
1 pc of micro USB recharging cable
1 pc of manual
Parts:
1. Micro USB charging port
2. Audio out jack
3. Power Button
4. pairing button
5. Volume -
6. Volume +
7. 3.5mm audio cable
Connection
Multimedia Speaker System. It can simply connects wire lessly to your
Multimedia Speaker System
Listen to your Bluetooth-Enabled music player
1. long press and hold the “Power Button” to turn on your
2. Press and hold the Pairing Button for 3 seconds till LED begins to alternate red and blue
3. put your audio device in Bluetooth pairing mode， your device will search for the
Speaker System
4. start your audio device playing
5. make sure y our audio device is within range of t he
(approximately 10 meters ) Once paired, the LED will show blue with sustained light.
6. adjust the volume.
7. find your desired song.
, if you are asked for a passkey , enter 0000
Multimedia Speaker System
Multimedia Speaker System
Multimedia
Loading...