DIVI BT2405 User Manual

TOUGH ROCK WIRELESS
CONNECTION SPEAKER

USER MANUAL

Thank you for purchasing and using the Ainope product.
To make sure that this product has the goodoperation
results for your phone or electronics, read the descriptions
of this product and also refer to the descriptions of
your mobile phone or electronics.

Receive distance : up to 10M
Input : DC5V-300mA
Power : 4W
Audio adapter : 3. 5mm
Time of play music : Up to 5 hours
Impedance : 4 OHM (Ω)
Music Mode : Wireless Connection, AUX
Lithium battery : 3. 7V/300mAh
Stand by time : Up to 200 Hours
product size : 79*38mm
Product: 118g

1. BT2405 uses wireless connection technology to
connect with other wireless connection devices such

as smart phones tablet PC, laptop to play.

2. BT2405 supports AUX in, it applies to every electronics
which with a 3. 5mm audio cable(such as iPhone, iPad,
tablet PC, PSP, electronic dictionary, electronic reading
machine) to play.

3. BT2405 supports Hands free for calling.

4. BT2405 Built-in Lithium battery. It can music playback

up to 5 hours

Instruction

① . Power Button (Mode Button)
② . TF card
③ . AUX port
④ . Previous track/Volume+control
⑤ . Pause
⑥ . Next track/Volume-control

Wireless Connection function and AUX function

1 . When you use Wireless Connection function,open your
mobile phone ”Wireless Connection” and Find the
name“BT2405”to connect.

2. When you want to change to AUX, please turn off
your mobile phone Wireless Connection, use 3.5mm

cable to connect your mobile phone and speaker.

Previous track/Volume+control

1. Previous Track: Short press.Volume+control:long press

2. Next track:Short press,Volume-control:long press

1.Bluetooth Mode Operation

1) After turn on BT2405 button and its Wireless Connection
will enter pairing mode,blue Light flashes mean Wireless

Connection waiting for your connect.

2) Open your device’s Wireless Connection.Search for the

Wireless Connection speaker code BT2405 And click

it to pair.

3) After the blue light is stop to flash mean pairing was
successful.

2.AUX in mode operation:

1) Insert a 3.5MM stereo plug into BT2405 after power
BT2405

2) BT2405 will switch to AUX in mode automatically.

3) Insert the other Plug end into the output audio
interface of electronic device. Such as mobile phone.

Computer. MP3. Etc. and then turn on the music
Player to enjoy music.

3.Hands free communication

1) TF Card Mode Operation

2) Plug your music-loaded TF card into BT2405 after

power BT2405

4.Charging Instructions.

1) When BT2405 battery is low, voice of “di” will inform

you to charge.BT2405 Will shut down automatically

later if not charging.

2) The red light is permanently on while charging and
turns off while charging fully.

5.Package Includes

1) Wireless Connection Speaker BT2405*1PCS

2) 3.5mm audio cable*1PCS, USB charging cable*1PCS,
Hook*1PCS

3) User manual*1PCS

FCC Statement

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received,
including interference that may cause undesired
operation. 
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,

which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:


1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and
receiver.

3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV

technician for help.

The device has been evaluated to meet general
RF exposure requirement. The device can be used
in portable exposure condition without restriction.

Shenzhen Diyiwei Electronic Co., Ltd

Web: www.globalainope.com

Email: [e-mail]

Add: Longquan Science and Technology Park, No. 19,

Huaxing Road,New Longhua District,Shenzhen, China

Made in China