DIVI A104 User Manual

SLENDER WAIST BLUETOOTH SPEAKER

hanks for choosing DIVI. For ensuring our product

T can bring you a fantastic using experience. Please read both manuals of our product and your own electronic equipments.

package and check whether the

Open the following parts are complete : A104Speaker x1/ USB Cable x1/ Specification x1 To enter the Photo-mode, press the power button twice rapidly when the bluetooth is connected. You will hear a beep sound, then you can take the photo by pressing the power button. The Photo-mode is available while the music is playing. The Direction of Key and Interface:

Double-clip to the photo model

onnecting PC by USB cable, the speaker will install the audio driver automatically which can achieve both sync the data and play music. It could read the SD card at the same time.

USB

PS : support Windows PC only

ator Status

Indic

Red Light

Charging

Fully Charged

Standby

Playing

Reading

Searching

Specific

tery : 500mAh Power : 3w

Bat Response : 100Hz -18KHz SNR : S/N≥80dB Size : Diameter 48×38.5mm Last Time : 5hours Charge Time : 2hours The bluetooth Protocol : HS/HF,A2DP,AVRCP,OPP Bluetooth Frequency Range : 2.4-2.48GHz Weight : 137g

Steady on

ations

Blue Light

Steady on

Flash Slowly

Flash

ttention

1 .

Before you use the produt please read the manual carefully and keep it properly.

Do not disassemble or refit the product by yourself.

Keep the product away from heat source.

Do not place the product in humid conditions.

Keep water or other liquids away from the interior of this product, or the prodact will break up.

Without playing for 5 minutes, the A104 will shut-down automatically.

7 .

When the speaker is on, it will enter bluetooth pairing status, searching and matching the historical device automatically without Micro SD card.

Please use a dry rag to across the product.

9 .

No flame should be placed around the item, such as lit candles.

10.

Please attention to the environment problem when you dispose batteries.

11.

This product can only be used between 0℃ ~ 45℃ , Humidity in the air should be under 80%.

12 .

Please do not use a damaged power cable.

13 .

Please don't fix the speaker by yourself. This product is not contain any user-serviceable parts.

fter-sales service and support

arranty description ( The warranty scope is limited

to the speaker only, not including accessories

and gifts )

the product is damaged or malfunctions

If within 12 months from the date of purchase, we will provide free maintenance service after the technicist of our company confirms that it was occurred in normal use. Free maintenance are not available under the following situations:

· No warranty card or product maintenance label has been damaged.

· Self-disassembly causes damage.

· The product malfunctions because of water drop, or man-made mechanical damage.

· Malfunctionanddamagescausedby force majeure or natural disasters.

In maintenance, the original card and commercial invoice must be provided. If the user cannot provide them, the free warranty is invalid.

Please f

ollow the manual to use the product. We a re not responsible fo r the loss caused by incorrect operations.

CC Statement

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received,

including interference that may cause undesired

operation. 

Changes or modifications not expressly approved by

the party responsible for compliance could void the

user's authority to operate the equipment.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:



1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV

technician for help.

The device has been evaluated to meet general

RF exposure requirement. The device can be used

in portable exposure condition without restriction.

hen DIVI Electronic Co.,Ltd

Shenz

Tel: 0755-32817991

Web: www.divi.hk

Address: Longquan Science and Technology Park,

No. 19, Huaxing Road, New Longhua District,

Shenzhen, China

Made in China

anty

warr period

保质期