Diversified Electronics ETN Data Sheet

800.727.5646 atcdiversified.com Diversified Electronics

OPERATION

\\\

When supply voltage is applied, the OFF delay (T1) begins. Upon
completion of the OFF delay, the load energizes and the ON delay (T2)
begins. Upon completion of the ON delay, the load de-energizes and
one cycle is complete. This ON/OFF cycling continues until the supply
voltage is removed. The OFF delay always equals the ON delay.

DIMENSIONS (INCHES)

\\\

• Totally Solid-state

• 2-Wire Leads (Series Connection with Load)

• Totally Encapsulated Circuitry

• Molded Case with Built-In Mounting Feature

• High Inrush Capability

• Low Cost

SPECIFICATIONS

\\\

TIMING
ACTION

TIMING RANGE

OUTPUT
RATING
(SOLID STATE)

SUPPLY
VOLTAGE

TERMINATIONS

TEMPERATURE
RATING

MOUNTING

ENCLOSURE

WEIGHT

Flasher, 50% Duty Cycle

Factory Fixed, (45-150)
Flashes per minute ±20%

1 A

Resistive

(Fullwave)

3 A

Resistive

(Halfwave)

120 VAC; ± 15%, 50/60

(2) 6 inch wires, 18 AWG, 300 Volt

Operate -4° to 140°F (-20° to +60°C) Free Air

Storage -40° to 185°F (-40° to +85°C)

No. 8 or No. 10 Screw

Polycarbonate Case, Totally Encapsulated for
Environmental Protection

0.1 lbs.

10 A Maximum (Inrush)

40 mA Minimum (Hold in Current)

2.5 Volt Drop @ 1 A

10 A Maximum (Inrush)

40mA Minimum (Hold in Current)

1.1 Volt Drop @ 3 Amp

• 1 Amp (Fullwave) and 3 Amp (halfwave) versions

ETN

S

o

l

i

d

-

S

t

a

F

t

e

MODEL NUMBER >>>>>> ETN 120 F T 75

Voltage

120 Volts

Type of Voltage

3 Amp Halfwave

Type of Operation

75 Flashes/minute (Standard)

Contact factory for other flashing rates

120

AC Voltage

Fixed Unit

Enclosure Type

FLASHING RATE

A

H

F

Enclosure

e

h

s

a

l

T

75

r

ETN Series

//

Time Delay Relays

59