Page 1
11’
7 ’
MoonBeam
3
Quick Reference Guide
TM
1
Set the MoonBeamTM3 Base Unit in the
desired location for disinfection. Lock
caster wheels by pressing down on foot
lever. Twist Remote Cover and lift to
remove from the Base Unit.
5
2
Plug in the power cord to a grounded
electrical wall socket.
6
Against door
3
Move the MoonBeam
disinfected.
7
TM
3 to the area to be
4
Position the arms in an inverted
“peace sign” configuration and angle
lights to cover an area up to
7’ (2.1m) by 11’ (3.3m) for each arm.
8
The MoonBeam
targeted area for the time duration
selected on the Base Unit.
Select the 3 minute cycle time.
TM
3 will disinfect the
Place the Remote Cover outside of the
room against the door. The built-in safety
of the Remote Cover includes a proximity
sensor to detect if the door is opened while
MoonBeamTM3 is in operation.
Questions: 1-800-558-2332
Always wear personal protective equipment.
© 2019 Divers ey, Inc. All Rig hts Reser ved. 77331-CH T en (19/051)
* The hum mingbird and w ing shape lo go is a tradema rk of Diverse y, Inc.
Press the Power button, and then wait a few
seconds for the system to come to ready.
Press the Start button on the Remote Cover
to begin the disinfection process cycle. Upon
completion, the Process Complete indicator
will be illuminated on the Remote Cover. The
targeted area is now disinfected and ready
for use.
For comprehensive product information,
refer to the MoonBeam
TM
3 User’s Manual.
Loading...