DITTING KS 3, KS 1 Operating Instructions Manual

Operating instructions

64426 A 03/35 page 1 - 14



KS 1 / KS 3

TYPE

Voltage

Manuf. no.

Your service centre ...............................................

...............................................

...............................................

...............................................

...............................................

Operating instructions

64426 A 03/35 page 2 - 14



Contents

page

1 General

1.1 Warranty information 3

1.2 Transfer declaration 4

1.3 General safety instructions 5

1.3.1 Information and safety symbols 6

2 Description and Safety Device 6

2.1 Safety devices 6

3 Setting up and Basic Adjustment

3.1 Setting up area 7

3.2 Initial Set-up 7

3.3 Installation 7

3.4 Basic Setting 7

4 Operation

4.1 Operating controls 8

5 Care / Maintenance / Adjustment

5.1 Cleaning of the coffee grinder 9

5.2 Maintenance and repair 10

5.3 Spare parts 10

5.4.1 Setting scale (adjustment) 10

5.4.2 Changing the scale setting 11

5.5 Replacing the grinding discs 12

6 Faults / action

6.1 Action in event of a fault 13

6.2 Table with possible malfunctions 13

6.3 Thermal protector 14

7 Customer service 14

Operating instructions

64426 A 03/35 page 3 - 14



1 General

Dear Customer,

We congratulate and thank you for purchasing a quality product. These operating
instructions have been prepared to simplify your use of the coffee grinder. They contain
information, advice and instructions for the best use of your unit.

1.1 Warranty information

ALTHOUGH YOUR COFFEE GRINDER IS DISTINGUISHED BY A HIGH QUALITY AND
SAFETY STANDARD, DAMAGE TO MATERIAL OR RISK OF INJURY CANNOT BE
EXCLUDED IF OPERATED INCORRECTLY, USED IMPROPERLY OR MISUSED.

THE OPERATING INSTRUCTIONS WILL THEREFORE FAMILIARISE YOU WITH
CORRECT USE OF THE COFFEE GRINDER AND ASSIST YOU TO AVOID WRONG
OPERATIONS. IF THE ENCLOSED INSTRUCTIONS ARE FOLLOWED EXACTLY, YOU
WILL AVOID DANGERS, REDUCE REPAIR AND STOPPAGE TIMES AND INCREASE
THE RELIABILITY AND SERVICE LIFE OF YOUR UNIT.

TO ENSURE THAT YOU AND YOUR EMPLOYEES TAKE NOTICE OF THE CONTENTS
OF THE OPERATING INSTRUCTIONS AND FOR YOUR OWN SAFETY, WE WOULD ASK
YOU TO COMPLETE THE TRANSFER DECLARATION PRINTED ON THE FOLLOWING
PAGE, DETACH THIS ALONG THE PERFORATION AND RETURN IT TO YOUR DEALER.

Operating instructions

64426 A 03/35 page 4 - 14



1.2 Transfer declaration

To ensure transfer of the operating instructions to final consumers

Note: The following declaration should be completed by the dealer and the purchaser. The

purchaser undertakes to return this declaration to the dealer. The purchaser thereby certifies
that the dealer has drawn his attention to the contents of operating instructions no. 64426, in
particular to the relevant safety instructions for use of the machine.

64426 A 03/35 page 4 - 14

Transfer declaration

(1) Type Machine no.

(2) Address of customer

(3) The machine specified in (1) was purchased by me. The complete operating
instructions were handed to me with transfer of the machine.

_______________________ _______________________
Signature of customer Place / date

(4) Date of transfer

(5) Address of dealer/importer

__________________________
Company stamp/signature

(6) The machine was handed to the customer in accordance with the guidelines of
the manufacturer.

Company stamp/signature if not identical with (5)

_____________________________ _______________________
Signature of customer service- Date
specialist

✂✂✂✂

Operating instructions

64426 A 03/35 page 5 - 14



1.3 General safety instructions

• The operating instructions must be kept permanently at the place of operation of
the machine and if possible attached at the point of installation in the immediate
vicinity of the machine.

• The competent sales and service personnel must have read the operating
instructions before putting the coffee grinder into operation and be familiar with all
functions including action in the event of a fault.

• If customers themselves operate the machine, a notice must be placed clearly
visible in the immediate vicinity of the machine that customers must immediately
call the service personnel responsible in the event of a fault and not try to eliminate
the fault themselves by tampering with the machine.

• The machine must be placed in the sales areas so that the sales personnel
responsible can be reached by the customer without difficulty.

• The model KS 1 / KS 3 was developed and built for intermittent duty only and is
therefore not suitable for continuous operation. The max. grinding time, without
interruption, is 40 minutes. After 40 minutes, the grinder must be switched off and
not be operated for approx. 30 min.

• Only original spare-parts must be used for repairs to the grinder. If spare-parts
from other manufacturers are used, the serviceability of the grinder may be
impaired. In addition, further injury to persons or material damage cannot be
excluded.

• The grinder should be installed out of reach of children. Children and users must
on no account reach into the openings or come into contact with electrical
components.

• Never reach into the hopper opening while the machine is running.

• Never touch electrical components with conducting objects, such as needles, pins,

cutlery, etc. !

• The emission value referred to the workplace is 76 dB(A).

• The machine must be electrically protected by fuses according to the nameplate

and the local regulations.