DITTING KR 804, KF 804 Operating Instructions Manual
Page 1
Operating instructions
KR / KF 804
KR 804 KF 804
TYPE
Voltage
Manuf. no.
Page 1
4 Faults / action 8
4.1 Action in event of a fault 8
4.1.1 Table with possible malfunctions 9
4.2 Repairs 9
4.2.1 Unblocking the discharge tube 9
4.2.2 Unblocking the grinding unit 9
4.2.3 Replacing the rubber bolt (KF only) 10
4.2.4 Circuit breaker 10
5 Customer service 11
6 CE Declaration of conformity 11
Table of content
1 General 2
1.1 Warranty information 2
1.2 Transfer declaration 2
1.3 General safety instructions 3
1.3.1 Information and safety symbols 3
2 Installation of coee grinder 4
2.1 Description and installation of unit 4
2.2 How to use the coee grinder 5
3 Care / maintenance / adjustment 6
3.1 Care and cleaning of the coee grinder 6
3.2 Maintenance 6
3.3 Setting the scale (adjustment) 6
3.3.1 Basic setting (calibration) 7
3.3.2 Changing the scale setting (adjustment for customer
settings) 7
3.4 Replacing the grinding discs 8
Page 2
1 General
Dear Customer,
We congratulate and thank you for purchasing a DITTING quality product.
These operating instructions have been prepared to simplify your use of the
coee grinder. They contain information, advice and instructions for the best
use of your unit.
1.1 Warranty information
ALTHOUGH YOUR COFFEE GRINDER IS DISTINGUISHED BY A HIGH QUALITY AND SAFETY STANDARD, DAMAGE TO MATERIAL OR RISK OF INJURY
CANNOT BE EXCLUDED IF OPERATED INCORRECTLY, USED IMPROPERLY OR
MISUSED.
THE OPERATING INSTRUCTIONS WILL THEREFORE FAMILIARISE YOU WITH
CORRECT USE OF THE COFFEE GRINDER AND ASSIST YOU TO AVOID WRONG
OPERATIONS. IF THE ENCLOSED INSTRUCTIONS ARE FOLLOWED EXACTLY,
YOU WILL AVOID DANGERS, REDUCE REPAIR AND STOPPAGE TIMES AND
INCREASE THE RELIABILITY AND SERVICE LIFE OF YOUR UNIT. TO ENSURE
THAT YOU AND YOUR EMPLOYEES TAKE NOTICE OF THE CONTENTS OF THE
OPERATING INSTRUCTIONS AND FOR YOUR OWN SAFETY, WE WOULD ASK
YOU TO COMPLETE THE TRANSFER DECLARATION PRINTED ON THE FOLLOWING PAGE, DETACH THIS ALONG THE PERFORATION AND RETURN IT TO
YOUR DEALER.
1.2 Transfer declaration
To ensure transfer of the operating instructions to nal consumers.
Note: The following declaration should be completed by the dealer and the
purchaser. The purchaser undertakes to return this declaration to the dealer.
The purchaser thereby certies that the dealer has drawn his attention to the
contents of operating instructions no. 64400, in particular to the relevant safety
instructions for use of the machine.
Page 3
1.3 General safety instructions
The operating instructions must be kept permanently at the place of operation
of the machine and if possible attached at the point of installation in the immediate vicinity of the machine.
The competent sales and service personnel must have read the operating instructions before putting the coee grinder into operation and be familiar with
all functions including action in the event of a fault.
If customers themselves operate the machine, a notice must be placed clearly
visible in the immediate vicinity of the machine that customers must immediately call the service personnel responsible in the event of a fault and not try
to eliminate the fault themselves by tampering with the machine.
The machine must be placed in the sales areas so that the sales personnel
responsible can be reached by the customer without diculty.
Only original spare-parts must be used for repairs to the grinder. If spare-parts
from other manufacturers are used, the serviceability of the grinder may be
impaired. In addition, further injury to persons or material damage cannot be
excluded.
The grinder should be installed out of reach of children. Children and users
must on no account reach into the openings or come into contact with electrical components.
Only original grinding discs sharpened by DITTING must be used.
Never reach into the hopper opening while the machine is running.
Never touch electrical components with conducting objects, such as needles,
pins, cutlery, etc. !
The emission value referred to the workplace is 76 dB(A).
The machine must be electrically protected by fuses according to the nameplate and the local regulations.
1.3.1 Information and safety symbols
Two information symbols are used in these operating instructions to emphasise important comments in the dokument.
Information
This symbol indicates information containing important data
concerning ecient use. Non-observance can lead to faults.
Safety
This symbol indicates information which if not observed can
lead to danger to persons and/or substantial material damage.
The safety instructions must be followed without fail.
Loading...