Ditek DTK-ZSI6A, DTK-S130A12PK, DTK-S14B12PK, DTK-S30A12PK, DTK-S30B12PK Specsheet

...

The DITEK Snap-It quick-connect line protector is designed specifically for Voice/Data professionals. The Snap-It provides both voltage and current limiting in addition to surge protection. Available in four different voltages, the DTK-S series makes digital line protection a “Snap!”

DTK-S “Snap-It” Series

66 Block Quick-Connect Surge Protection

General Product Specifications

DTK-S Series

Application Features

• Quick connect module –

• Each Snap-It protects one digital line pair

• Field-replaceable, with built-in diagnostic test points

• Self-resetting fusing

• Models available for both current-limited and

standard lines, and for low capacitance digital lines

Product Features

Agency Approvals: UL497A, UL497B Connection Method: Stab connection to 66 Block Max Continuous Current: 150mA (-A models),

Max Surge Current: 120 Amps per pair (5V)

Protection Modes: Tip-Ground, Ring-Ground Operating Temperature: -40°F - Maximum Humidity: 95% non-condensing Dimensions: 1.56”H x 3.24”W x .38”D

(39.6mm x 82.3mm x 9.6mm)

Weight: .5oz (14g) Housing: High Impact Plastic Warranty: Ten Year Limited Warranty Accessories: Ground Bus –

NOTE: Each 66 Block requires one ‘SIGB’

* UL Listing N/A

no bridge clips required!

2A (-B models)

1,000 Amps per pair (14V, 30V) 5,000 Amps per pair (50V) 5,000 Amps per pair (130V)

158°F (-40°C-70°C)

part number DTK-SIGB

ground bar

Selection Guide

DTK- S##A (150mA current);

The “A” The “B”

suffix denotes UL497A Listed suffix denotes UL497B Listed

## -

Service Voltage: 14V, 30V, 130V

DTK-S##B (2A current)

Example: DTK-S30A Example: DTK-S95B Note:

For low-capacitance digital lines ≤5V, order DTK-ZSI6A*

Performance Data

Model DTK-S##

(DTK-ZSI6A only) 5V 6.8VDC 6.8V

14 14V 18VDC 22V 30 30V 38VDC 47V 50 50V 66VDC 82V 130 130V 175VDC 204V

Service Voltage MCOV

Clamp Voltage

One DITEK Center 1720 Starkey Road Largo, FL 33771

Technical Support: 1-888-472-6100

1-800-753-2345

www.ditekcorp.com

Doc. Number: SPS-100056-001 Rev 3 2/12

Specification Subject to Change