Ditek DTK-VSPN Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.

One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: [phone] Direct: 727-812-5000
Technical Support: 1-888-472-6100

www.diteksurgeprotection.com

Doc. Number: SPS-100064-002 Rev 5 12/16
©2016 DITEK Corp.
Page 1 of 1

Technical Specifications50VDC

MCOV:

50VDC

Clamping Voltage:

75VDC (CP-S)

Protection Modes:

Center Pin-Shield

Surge Current Rating:

20,000 Amps

Band Pass Range:

0Hz – 2GHz

Standing Wave Ratio:

1.2:1

Insertion Loss:

<0.3dB

Impedance:

50 Ohms

Mechanical Characteristics

Connection Method:

Female Type N Connector In/Out

Housing:

Aluminum

Dimensions:

2.6“Lx 1.1“W x 3“H

(66mm x 28mm x 76mm)

Weight:

2.5oz (71g)

Quality, Standards & Approval

Warranty:

Ten Year Limited Warranty

Cellular Alarm Communicators are becoming widely
used in the fire alarm industry. In many installations
an external antenna kit is added to attain the
required wireless signal strength. Since the antenna
is external to the building, it becomes an avenue for
harmful transient surges to enter the system through
the coaxial antenna cable.

DITEK’s DTK-VSPN surge protector combines

state-of-the-art hybrid circuit technology with N type
connectors to protect a variety of coaxial devices

Product Features

 Protects external antenna leads to cellular

transmitters, GPS or base stations

 Tightest clamping available provides superior

protection

 Grounding lug for easy termination
 0Hz – 2GHz frequency range
 Small footprint makes installation easy

Applications

 GSM Antenna Extenders
 Base Stations

Wiring Diagram

EQUIPMENT

GROUND WIRE

#14 AWG MIN

WIRING

INPUT (FIELD)