Ditek DTK-VSPA Specsheet
Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: 1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Doc. Number: SPS-100064-001 Rev 4 03/17
©2017 DITEK Corp.
Page 1 of 1
Technical Specifications
Part Number:
DTK-VSPA
Service Voltage:
50VDC
Clamping Voltage:
75VDC
Protection Modes:
Center Pin – Shield, Shield - Ground
Surge Current Rating:
20,000A
Band Pass Range:
0Hz – 2GHz
Standing Wave Ratio:
(SWR) 1.2:1
Insertion Loss:
0.5dB
Impedance:
75Ohms
Mechanical Characteristics
Connection Method:
F Type (Female) In/Out
Housing:
ABS
Dimensions:
3.3”L x 2.0”W x 0.9”H
(84mm x 51mm x 23mm)
Weight:
2.5oz (71g)
Quality, Standards & Approval
Warranty:
Ten Year Limited
Applications
CATV Feeds
Digital Satellite Systems
Broadband Cable
DITEK’s DTK-VSPA video surge protectors combine state-of-
the-art circuit technology with F Type connectors to protect a
variety of video devices. Whether the need is for video protection
on CATV feeds, Digital Satellite Systems, or Broadband Cable,
DITEK’s VSP products provide optimum protection without signal
loss.
Accessories
DIN Rail Mounting Kit – Part Number
DTK-DRK
Product Features
Protects analog and digital video/data lines
Small footprint makes installation easy
Recommended for applications where AC
power is already protected
Can protect one or two lines
Loading...