Ditek DTK-UPS1000R, DTK-UPS2000RE, DTK-UPS3000RE Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.

One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: [phone] Direct: 727-812-5000
Technical Support: 1-888-472-6100

www.diteksurgeprotection.com

Doc. Number: SPS-100019-002 Rev 4 07/17
©2017 DITEK Corp.
Page 1 of 2

DITEK’s DTK-UPS Series combines robust surge protection with on-line double conversion Uninterruptible

Power Supply technology to enable your equipment to survive even the harshest power quality issues. From
surges and spikes to brownouts and complete power loss, the DTK-UPS Series will keep your equipment up
and running when it matters most. DITEK’s industry proven UPS products provide cost-effective and reliable
performance for network servers, video surveillance systems, back office computers and similar mission critical
equipment.

Accessories

 Extended Battery Packs
 SNMP Card
 Mounting Rails

Product Features

 Online double conversion technology provides

superior equipment protection

 Rack/Tower models available in 1kVA, 2kVA and

3kVA

 Mounting rails included with 2kVA and 3kVA models
 Easily converts from rack to tower profile
 Invisible transitioning between AC and battery
 Intuitive LCD display
 USB and Ethernet interfaces available on all models
 Software provided for remote monitoring
 SNMP Card included with all “E” models
 Supports auto shutdown when battery is depleted
 External battery pack available for extended run time

Applications

 Network Servers
 Video Surveillance Systems
 Back Office Computers
 PC-based phone systems
 Point of Sale Devices

Page 2 of 2

Technical Specifications

Part Number:

DTK-UPS1000R

DTK-UPS2000RE

DTK-UPS3000RE

Capacity:

1000VA, 900W

2000VA, 1800W

3000VA, 2700W

INPUT – Voltage Rating and Required Power

Voltage Rating:

100*/110*/115*/120/127VAC

Required Power:

15A

20A

30A

Low Line Transfer:

80VAC / 70VAC / 60VAC / 55VAC ± 5%

(based on load percentage 100% - 80% / 80% - 70% / 70% - 60% / 60% - 0)

Low Line Comeback:

80VAC / 75VAC / 65VAC / 60VAC ± 5%

High Line Transfer:

150VAC ± 5%

High Line Comeback:

140VAC ± 5%

Frequency Range:

50Hz / 60Hz

Power Factor:

≥ 0.99 at normal voltage

OUTPUT

Output Voltage:

100*/110*/115*/120/127VAC

AC Voltage Regulation:

± 1%

Frequency Range:

47 ~ 53Hz or 57 ~ 63Hz (Synchronized Range) / 50Hz ± 0.5% or 60Hz ± 0.5% (Battery Mode)

Current Crest Ratio (CF):

3:1 (Max.)

Harmonic Distortion (THDU):

≤ 2% (Linear Load) - ≤ 4% (Non-Linear Load)

Transfer Time:

AC TO DC: Zero - INVERTER TO BYPASS: 4 ms (typical)

Waveform (Battery Mode):

Pure Sine wave

OUTLETS

Programmable (non-critical loads):

2 15A

4 15A/20A

2 15A/20A

Receptacles (mission-critical loads):

2 15A

4 15A/20A

3 15A/20A/30A

EFFICIENCY

AC Mode:

90%

91% 91%

Battery Mode:

88%

88% 90%

BATTERY

Battery Type – Quantity:

12V/9Ah - 2

12V/9Ah - 4

12V/9Ah - 6

Typical Recharge Time:

4 hours recover to 90% capacity (for standard models)

Charging Current:

1.5A Max. (up to 8A with External Battery Pack)

Charging Voltage:

27.4VDC ± 1%

54.8VDC ± 1%

82.1VDC ± 1%

Battery Runtime (100% Load):
(50% Load):
(100% Load):
(50% Load):

2 minutes, 45 seconds

9 minutes, 30 seconds
15 min. with DTK-UXB1000R
38 min. with DTK-UXB1000R

4 minutes, 45 seconds

8 minutes, 30 seconds
16 min. with DTK-UXB2000R
39 min. with DTK-UXB2000R

4 minutes, 50 seconds

12 minutes, 50 seconds
16 min. with DTK-UXB3000R
38 min. with DTK-UXB3000R

INDICATORS

LCD:

UPS Status, Load Level, Battery Level/Info, Input/Output Info, Discharge Time, Fault Indicators

Alarm Sounding:

BATTERY MODE: every 4 seconds - LOW BATTERY: every second

OVERLOAD: twice every second - FAULT: countinuously

PHYSICAL

Dimensions (LxWxH):

16.14” x 17.24” x 3.46"

20.10” x 17.24” x 3.46”

24.80” x 17.24” x 3.46

Weight:

29.10 lbs

47.18 lbs

65.26 lbs

ENVIRONMENTAL

Humidity:

20 – 90% RH @ 0 - 40ºC (non-condensing)

Noise Level:

< 50dBA @ 1 Meter

MANAGEMENT

Smart RS-232/USB:

Compatible with Windows 2000/2003/XP/Vista/2008/7/10, Linux, Unix, MAC

Optional SNMP:

Power management from SNMP Manager and web browser – included with models ending in E

QUALITY, STANDARDS & APPROVAL

Agency Approvals:

UL1778, cUL

Warranty:

3 Year Limited Warranty

*Derate capacity to 95% when output is adjusted to 115VAC, to 90% when adjusted to 110VAC, and to 80% when adjusted to 100VAC