Ditek DTK-TSS4 Specsheet

DTK-TSS4

DITEK’s Total Surge Solution (TSS) is a range
of products that provide total surge protection
for addressable and conventional alarm
systems.

The TSS4 protects 120V system power on
electrical circuits and control panels. Its hybrid
design provides maximum critical load
protection with EMI/RFI filtering; and the NEMA
4X enclosure makes the TSS4 ideal for harsh
environments such as outdoor locations,
chemical plants, and water treatment facilities.

DTK-TSS4

Product Features

• NEMA 4X weatherproof enclosure

• Multi-stage hybrid circuit design

• UL1283 EMI/RFI filtering

• Series connected device

• LED indicates protection status

rd

• UL1449 3

Edition Listed

• Ten Year Limited Warranty

Specifications

Agency Approvals: UL1449 3rd Edition, cUL, UL1283
Protector Type: Type 2 SPD
Nominal Discharge C u rrent Rating (In): 3kA
SCCR: 10kA
Operating Voltage: 110VAC - 120VAC
MCOV: 150VAC
Peak Surge Current: 54,000 Amps
Maximum Continuous Current: 20A
EMI/RFI Attenuati on: Up to 35dB, 100kHz-100MHz
Protection Modes: All modes (L-N, L-G, N-G)
Voltage Protection Rating: 600V
Temperature Range: 32°F – 104°F (0°C - 40°C)
Dimensions: 9.50” x 6.25” x 3.63”

(241 mm x 159 mm x 92 mm)

Weight: 1.85 lb
Housing: Polycarbonate

54kA Series Connected Surge Protector

General Product Specifications

One DITEK Center
1720 Starkey Road
Largo, FL 33771

1-800-753-2345 Direct 1-727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

Document: SPS-100007-001 Rev 7 05/14

©2013 DITEK Corp.

Specification Subject to Change