Ditek DTK-TSS3 Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.

One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: [phone] Direct: 727-812-5000
Technical Support: 1-888-472-6100

www.diteksurgeprotection.com

Doc. Number: SPS-100006-001 Rev 9 11/16
©2016 DITEK Corp.
Page 1 of 1

Technical Specifications

Equipped with:

DTK-2MB

Multi-base system, 4 circuit pairs

See DTK-2MHLP Datasheet for

detailed information

Mechanical Characteristics

Enclosure:

Polycarbonate NEMA 4X (IP66)

UL Listed Industrial Control Panel Enclosure

UL94 Flammability Rating

Operating Temperature:

-40°F - 175°F (-40°C - 80°C)

Maximum Humidity:

95% non-condensing

Dimensions:

7”L x 4”W x 4”H

(178mm x 102mm x 102mm)

Weight:

4 lb. (1.8kg)

Quality, Standards & Approval

Agency Approvals:

UL497B for DTK-2MHLP
UL497A for DTK-2MHTP

Standards Compliance:

IEEE C62.41.1 –2, IEEE C62.45

Warranty:

Ten Year Limited Warranty

DITEK’s Total Surge Solution (TSS) is a range of

products that provide total surge protection for
addressable and conventional alarm systems.

The DTK-TSS3 is a perfect fit for building to building
notifier and communication runs. It comes with a
prewired four-pair mounting base. Adding DTK­2MHLP/2MHTP modules for data/signal and dialer circuit
protection provides a complete solution for your fire
alarm system.

Applications

 Fire Alarm Panels
 Control Panels
 UL Listed Control Panels where a UL Recognized

Component is Required

Product Features

 Hard-wired base for 2MHLP/2MHTP modules,

protects up to 4 SLC, NAC, IDC, PIV and dialer
circuits pairs (modules sold separately)

 Complete protection, simple installation, high quality,

and field-replaceable modules make the TSS3 a
perfect fit for alarm systems or control panels.

Example to protect two 24V data/signal pairs and two telco pairs:

1 x DTK-TSS3 (DTK-2MB in NEMA enclosure)
1 x DTK-2MHLP24B (protect 2-data/signal pairs 24V)
1 x DTK-2MHTP (protect 2-telco pairs)

Accessories

 Test Module Kit – Part Number DTK-2MHLPTM