
Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: 1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Doc. Number: SPS-100005-004 Rev 3 06/17
©2017 DITEK Corp.
Page 1 of 1
120VAC Surge Protector
See DTK-120SRD Datasheet
Mechanical Characteristics
Polycarbonate NEMA 4X (IP66)
UL Listed Industrial Control Panel Enclosure
UL94 Flammability Rating
-40°F - 175°F (-40°C - 80°C)
7.26”Lx 3.74”W x 10.43”H
(184mm x 95mm x 265mm)
Quality, Standards & Approval
UL1449, UL1283 for DTK-120SRD
IEEE C62.41.1 –2, IEEE C62.45
Ten Year Limited Warranty
DITEK’s Total Surge Solution (TSS) is a range of
products that provide total surge protection for
addressable and conventional alarm systems.
The DTK-TSS2NM is equipped with DTK-120SRD to
protect 120VAC system power, and has space available
for inserting low voltage surge protection or additional
monitoring modules as needed.
Applications
Fire Alarm Panels
Control Panels
UL listed control panels where a UL Recognized
Component is required
Accessories
Low Voltage Surge Protection Modules with hardwired
base – See DTK-2MHLP Series Datasheet
Product Features
AC power surge protection with dry contacts for
remote monitoring of surge protection status
6.5” x 4.5” space available for inserting low voltage
surge protection or additional monitoring modules
5-position grounding buss included to ensure
secure mechanical and electrical connections
Complete protection, simple installation and high
quality components make the TSS2NM a perfect fit
for alarm systems or control panels.