Ditek DTK-TSS2 Specsheet
Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: 1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Doc. Number: SPS-100005-001 Rev 12 11/16
©2016 DITEK Corp.
Page 1 of 1
Technical Specifications
Equipped with:
DTK-120SRD
120VAC Surge Protector
See DTK-120SRD Datasheet
DTK-2MB
Multi-base system, 4 circuit pairs
See DTK-2MHLP Datasheet
100-640
Ground Bar Kit for Grounding
See 100-640 Datasheet
Mechanical Characteristics
Enclosure:
Polycarbonate NEMA 4X (IP66)
UL Listed Industrial Control Panel Enclosure
UL94 Flammability Rating
Operating Temperature:
-40°F - 175°F (-40°C - 80°C)
Maximum Humidity:
95% non-condensing
Dimensions:
7.26”Lx 3.74”W x 10.43”H
(184mm x 95mm x 265mm)
Weight:
5 lb. (2.5kg)
Quality, Standards & Approval
Agency Approvals:
UL1449, UL1283 for DTK-120SRD
UL497B for DTK-2MHLP
UL497A for DTK-2MHTP
Standards Compliance:
IEEE C62.41.1 –2, IEEE C62.45
Warranty:
Ten Year Limited Warranty
DITEK’s Total Surge Solution (TSS) is a range of
products that provide total surge protection for
addressable and conventional alarm systems.
The DTK-TSS2 protects 120V system power and up to
four pairs of SLC, IDC/PIV, NAC or dialer circuits. The
TSS2 is equipped with DTK-120SRD 120VAC surge
protection and a prewired DTK-2MB mounting base.
Adding DTK-2MHLP/2MHTP modules for data/signal and
dialer circuit protection provides a complete solution for
your fire alarm system.
Applications
Fire Alarm Panels
Control Panels
UL listed control panels where a UL Recognized
Component is required
Example to protect 120V system power, two 24V data/signal pairs,
two 12V data/signal pairs and two telco pairs:
1 x DTK-TSS2 (DTK-120SRD & DTK-2MB in NEMA enclosure)
1 x DTK-2MHLP24B (protect 2-data/signal pairs 24V)
1 x DTK-2MHLP12B (protect 2-data/signal pairs 12V)
1 x DTK-2MHTP (protect 2-telco pairs)
Accessories
Test Module Kit – Part Number DTK-2MHLPTM
Product Features
AC power surge protection with dry contacts for
remote monitoring of surge protection status
Hard-wired base for 2MHLP/2MHTP modules,
protects up to 4 SLC, NAC, IDC, PIV and dialer
circuits pairs (must be ordered separately)
Complete protection, simple installation, high
quality, and field-replaceable modules make the
TSS2 a perfect fit for alarm systems or control
panels.
Loading...