Ditek DTK-TSS1IP Specsheet

DTK-TSS1 Series Total Surge Solution

Complete Fire Panel Protection for AC Power and Loop Circuits

DITEK’s Total Surge Solution (TSS) is a range of products that provide total surge protection for addressable and conventional alarm systems. The TSS1 protects 120V AC power and up to ten pairs of SLC, IDC/PIV, NAC and dialer circuits.

The TSS1 is equipped with DTK-120SRD 120VAC surge protection and a prewired DTK5MB mounting base for loop protection. Adding DTK-2MHLP modules or 2MHTP telco modules provides a custom solution for your system. Complete protection, simple installation, high quality, and field-replaceable modules make the TSS1 a perfect fit for addressable alarm systems or control panels. For alarm panels with

network connections, use DTK-TSS1IP.

DTK-TSS1

Product Features

• 20A current rated, 54kA surge rated AC protection

• 20kA surge rated low voltage suppression

• Dry contacts for remote monitoring of surge protection status

• Field replaceable surge modules for NAC, IDC/PIV and SLC circuits

• Ten Year Limited Warranty

Specifications

• NEMA TYPE 1 steel enclosure with latching cover

• UL Listed - Industrial Control Panel Enclosure

• Weight: ≈ 11 lb. (5 kg)

• Dimensions: 12” x 12” x 4” (305mm x 305mm x 102mm)

• Operating temperature: -40° F to 175° F (-40°C to 80°C)

Options

• DTK-TSS1IP same as TSS1 with IP network protector, DTK-MRJ45C5E

• DTK-TSS2 120V AC and four-line low voltage transient surge protection

• DTK-TSS3 four-line low voltage protection for building-to-building runs

• Voice/Data protection modules: DTK-2MHLP (select required voltage), DTK-2MHTP (Telco lines)

General Product Specifications

DTK-120SRD AC Protection Features

• Agency Approvals: UL1449 3rd Edition, cUL, UL1283 EMI/RFI filtering

• Protector Type: Type 4 SPD, for Type 2 Application

• Nominal Discharge Current Rating (In): 3kA

• SCCR: 10kA

• Operating Voltage: 120VAC

• MCOV: 150VAC

• Peak Surge Current: 54,000 Amps

• LED function indicators

• Form C dry contact circuit

Low Voltage Protection Features

• Hard-wire base for replaceable suppression modules

• DTK-2MHLP modules are UL497B listed

• DTK-2MHTP telco modules are UL497A listed

• 2MHLP low voltage modules protect two data/signal pairs each. The TSS1, with 2MHLP modules, can protect power and up to ten data/signal pairs.

• Available voltages: 5VDC – 130VDC

• Maximum continuous current: 5A per module

• DTK-2MHLPTM Test/Bridging module is included

One DITEK Center 1720 Starkey Road Largo, FL 33771

NOTE: See DTK-2MHLP/DTK-2MHTP/DTK-120SRD/DTK-MRJ45C5E

Datasheets for detailed specifications on SLC, IDC/PIV, NAC, Dialer &

AC Power Protection

1-800-753-2345 Direct 1-727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

Doc Number: SPS-100004-001 Rev 11 04-13

Specification Subject to Change