Ditek DTK-RM24NETS Specsheet
Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: 1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Doc. Number: SPS-100092-001 Rev 2 04/18
©2018 DITEK Corp.
Page 1 of 1
Technical Specifications
Service Voltage:
<60V
Protection Modes:
L-G (All), L-L (All)
Clamping Voltage
Common Mode (L-G):
75V
Clamping Voltage
Differential Mode (L-L):
7.22V
Surge Current Rating:
20kA/Pair
Max. Continuous Current:
1.5Amps
Power Handling:
144 Watts
Data Rate:
Up To 10GbE
Mechanical Characteristics
Connection Method:
Shielded RJ45 In/Out, 24 Channels
Housing:
Galvanneal
Operating Temperature:
-40°F - 158°F (-40°C - 70°C)
Maximum Humidity:
95% non-condensing
Dimensions:
19“L x 2.75“W x 1.75“H
(483mm x 70mm x 45mm)
Weight:
1.67lb (.76kg)
Quality, Standards & Approval
Agency Approvals:
UL497B
Standards Compliance:
CAT5e, EIA/TIA568A, EIA/TIA568B
Warranty:
Ten Year Limited Warranty
Category
Max Data Speed
Transmission
Max
Bandwidth
Typical
Distance
CAT3
10 Mbps
16 MHz
100 m
CAT5
10 /100 Mbps
100 MHz
100 m
CAT5e
1 Gb
100 MHz
100 m
CAT6
1 Gb
250 MHz
100 m
CAT6A
10 Gb
500 MHz
100 m
Cabling information obtained from TIA-568-C.2
DITEK’s DTK-RM24NETS is a 24-channel, 1U rack mount surge protector that use state-of-the-art circuitry
to provide best-in-breed surge protection for shielded Ethernet, PoE and optional PoE extender* circuits. The
DTK-RM24NETS Series supports data speeds up to 10GbE, and provides surge protection grounding to remote
devices when used with STP cabling; making it ideal for installations where multiple Ethernet cabling feeds
require protection before entering network switches.
Product Features
Uses SAD and GDT technologies to provide optimal
protection for shielded Ethernet, PoE & PoE
extender* circuits
Rapid-replacement modular design allows modules
to be swapped from front of device without removing
from rack
Robust 20kA per pair surge current capacity is the
highest offered for shielded network devices
PoE Plus, HiPoE ready for high-wattage applications
Applications
Network Switches, NVR’s, PoE Hubs
Midspans, Injectors, VoIP Systems
Ethernet & PoE Devices, PoE Extenders
Accessories
Field-replaceable modules
o DTK-NETMS - Ethernet & PoE Circuits
o DTK-EXTMS – PoE Extender Circuits
* DTK-EXTMS module required to protect PoE extender circuits
Loading...