Ditek DTK-RM16EXTS Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.

One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100

www.diteksurgeprotection.com

Technical Specifications

Service Voltage:

<60V

Protection Modes:

L-G (All), L-L (All)

Clamping Voltage Common Mode (L-G):

75V

Clamping Voltage Differential Mode (L-L):

72V

Surge Current Rating:

20kA/Pair

Max. Continuous Current:

1.5 Amps

Power Handling:

144 Watts

Data Rate:

Up To 10GbE

Mechanical Characteristics

Connection Method:

Shielded RJ45 In/Out, 16 Channels

Housing:

Galvanneal

Operating Temperature:

-40F – 158F (-40C – 70C)

Maximum Humidity:

95% non-condensing

Dimensions:

19“L x 2.75“W x 1.75“H

(483mm x 70mm x 45mm)

Weight:

1.67lb (.76kg)

Quality, Standards & Approval

Agency Approvals:

UL497B

Standards Compliance:

CAT5e, EIA/TIA568A, EIA/TIA568B

Warranty:

Ten Year Limited Warranty

Category

Max Data

Transmission

Speed

Max

Bandwidth

Typical

Distance

CAT3

10 Mbps

16 MHz

100 m

CAT5

10 / 100 Mbps

100 MHz

100 m

CAT5e

1 Gbps

100 MHz

100 m

CAT6

1 Gbps

250 MHz

100 m

CAT6A

10 Gbps

500 MHz

100 m

DITEK’s DTK-RM16EXTS is a 16-channel, upgradeable, 1U rack mount surge protector designed with state-

of-the-art circuitry to provide superior protection for shielded Power over Ethernet Extender Circuits. It supports data speeds up to 10GbE, and provides surge protection grounding to remote devices when used with STP cabling. The DTK-RM16EXTS is ideal for installations with multiple-port mid span injectors and hybrid network scenarios.

Applications

 Ethernet & PoE Devices, PoE Extenders

* Cabling information obtained from TIA-568-C.2

Product Features

 Uses SAD and GDT technologies for optimal circuit

protection

 Robust 20kA per pair surge current capacity is the

highest offered for shielded network devices

 Rapid-replacement modular design allows for

modules to be swapped from front of device without removing from rack

 Additional modules can be added to support up to

24-channels

 PoE Plus, HiPoE ready for high-wattage applications

Accessories

 Mix and match rapid-replacement modules

o DTK-EXTMS – For PoE Extender Circuits o DTK-NETMS – For Ethernet & PoE Circuits

* DTK-NETMS module required to protect Ethernet & PoE circuits