Ditek DTK-RM12POES Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.

One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100

www.diteksurgeprotection.com

Technical Specifications

Service Voltage:

48V

MCOV:

64V

Clamping Voltage:

72V

Protection Modes:

Line-Ground (All)

Line-Line (All)

Surge Current Rating:

20kA/Pair

Max. Continuous Current:

1.5A

Power Handling:

144 Watts

Data Rate:

1000 Mbps

Mechanical Characteristics

Connection Method:

Shielded RJ45 In/Out, 12 ports

Housing:

Galvanneal

Operating Temperature:

-40°F - 158°F (-40°C - 70°C)

Maximum Humidity:

95% non-condensing

Dimensions:

19“L x 2.75“W x 1.75“H

(483mm x 70mm x 45mm)

Weight:

1.67lb (.76kg)

Quality, Standards & Approval

Agency Approvals:

UL497B

Standards Compliance:

CAT5e, EIA/TIA568A,

EIA/TIA568B

Warranty:

Ten Year Limited Warranty

Category

Max Data

Transmission

Speed

Max

Bandwidth

Typical

Distance

CAT3

10 Mbps

16 MHz

100 m

CAT5

10 / 100 Mbps

100 MHz

100 m

CAT5e

1 Gbps

100 MHz

100 m

CAT6

1 Gbps

250 MHz

100 m

CAT6A

10 Gbps

500 MHz

100 m

DITEK’s DTK-RM12POES is designed with state-of-the-art circuitry to provide superior protection for

Shielded Power over Ethernet connections. This 12-port, 1U Rack Mount surge protector is ideal for installations where multiple Ethernet cabling feeds require protection before entering network switches. Its multi-stage, hybrid design provides superior protection for all your Power over Ethernet devices.

Product Features

 Uses SAD and GDT technologies  Individual field-replaceable modules with Shielded

RJ45 connections

 Provides grounding to remote devices when using

STP cabling

 Gigabit Ethernet data speed without signal

degradation

 Compatible with CAT5e, CAT6 and CAT6A cabling

infrastructure

 Complies with IEEE Std. 802.3af and 802.3at for

Power Over Ethernet

 PoE Plus, HiPoE ready for high-wattage applications

Applications

 Network Switches, NVR’s  Midspans, Injectors, PoE Hubs  Power over Ethernet Devices  VoIP Systems

Accessories

 Field replaceable module – DTK-RM12PSM

* Cabling information obtained from TIA-568-C.2